Sandwich Grill
Model PG-CN-0515-F
Item 21464
Instruction Manual
Revised - 08/02/2017
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: service@omcan.com
www.omcan.com
Table of Contents
Model PG-CN-0515-F
Section
Page
General Information --------------------------------------------------------------------------- 3 - 4
Safety and Warranty --------------------------------------------------------------------------- 4 - 5
Technical Specifications -------------------------------------------------------------------------- 5
Installation -------------------------------------------------------------------------------------------- 6
Operation --------------------------------------------------------------------------------------------- 6
Maintenance ------------------------------------------------------------------------------------- 6 - 7
Parts Breakdown ------------------------------------------------------------------------------- 7 - 8
Electrical Schematics ------------------------------------------------------------------------------ 9
Notes ------------------------------------------------------------------------------------------------ 10
Warranty Registration ---------------------------------------------------------------------------- 11
2
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
--------------------------------------------------------------------------------------------------------------------------------------------------Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’influence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modification
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton afin de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
3
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
--------------------------------------------------------------------------------------------------------------------------------------------------Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna influencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modificación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Safety and Warranty
•
•
•
Please take notice that the unit will still be too hot to handle immediately after use.
The Contact Grill has a thermal cut-off safety device to avoid over heating.
If the power cord is damaged, it must be replaced by qualified technician.
1 YEAR PARTS AND BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
4
Safety and Warranty
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specifications
Model
Grill Surface
Power
Amps
Thermostat Control
Electrical
Top Grill
Bottom Grill
Weight
Dimensions
Item Number
PG-CN-0515-F
10” x 11” / 254 x 279mm
1800W
16A
572°F / 300°C
120V / 60Hz / 1
Smooth
Smooth
50 lbs. / 22.7 kgs.
12” x 15.4” x 10” / 298 x 391 x 248mm
21464
5
Installation
Take out the Omcan Contact Grill from the packaging and locate the unit on a firm level surface.
When this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative
finished, etc., it is recommended that they be made of non-combustible material, if not, they shall be clad with
a suitable non-combustible heat-insulating material, and that the closet attention be paid to fire prevention
regulations.
Once the Contact Grill has been placed in position by consulting International Standards and regulations.
Cleaning the cast iron plate thoroughly is advised. Warm up the cast iron plate for 10 minutes until all smoke
and/or odor has dissipated. Switch off and unplug the unit, then use warm, soapy water to clean.
NEVER USE COLD WATER ON THE HOT PLATE.
Operation
Always preheat the grill before use until the ready light illuminates.
Lift the top grill plate, arrange food on the bottom plate and bring top plate back down to make contact with
food and begin cooking. If additional sandwiches are desired. Lower the lid to preserve the heat while you
prepare the additional sandwiches. When not cooking, the thermostat is turned off, unplug the unit.
Maintenance
Be sure to always wash the grill plates after each use to remove any residue that may have accumulated.
For cleaning cast iron plate, please use warm soapy water while still warm. Do not use cold water on hot plate.
After cleaning, be sure the oil tray must be dry thoroughly before putting them back to the unit.
Do not immerse completely in water or any liquid to clean. The appliance is not to be cleaned with a water jet.
If the Omcan Contact Grill does not work, please check the following:
• The power supply is correct and switched on.
• The positions of switch and thermostat are correct.
6
Maintenance
REFERENCE
Item Number
Model Number
Description
Manufacturer Model
Number
21464
PG-CN-0515-F
Panini Grill 10” x 11” / 248mm x 267mm
Single Smooth/Smooth 120V/60/1 cETLus
PA10171
Parts Breakdown
Model PG-CN-0515-F 21464
Item No.
Description
Position
Item No.
Description
Position
Item No.
Description
Position
63520
Rear Cover for PA10171
1
20308
Grilling Plate (Top) for PA10171
9
20315
Knob for PA10171
17
63521
Spring for PA10171
2
20309
Grilling Plate (Bottom) for PA10171
10
20347
Thermostat for PA10171
18
26021
Lid for PA10171
3
20310
Element (Bottom) for PA10171
11
20313
Oil Tray for PA10171
19
20305
Big Handle for PA10171
4
63524
Fixing Plate (Bottom) for PA10171
12
73056
Cover (Bottom) for PA10171
20
20306
Small Handle for PA10171
5
63525
Insulation Plate (Bottom) for PA10171
13
20318
Plug and Lead for PA10171
21
63522
Insulation Plate (Top) for PA10171
6
20311
Body for PA10171
14
20319
Limiting Thermostat for PA10171
22
63523
Fixing Plate (Top) for PA10171
7
20351
Power Switch for PA10171
15
63526
Fixing Part for PA10171
23
20307
Element (Top) for PA10171
8
20314
Indicator Light for PA10171
16
7
Parts Breakdown
Model PG-CN-0515-F 21464
8
Electrical Schematics
Model PG-CN-0515-F 21464
9
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
10
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specified below. You can also register online by visiting:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécifié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
www.omcan.com/warrantyregistration.html
For mailing in Canada
For mailing in the US
Pour postale au Canada
Pour diffusion aux États-Unis
Por correo en Canadá
Por correo en los EE.UU.
OMCAN
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
Canada, L5L 4X5
USA, 14305
or email to: service@omcan.com

Purchaser’s Information
Name:
Company Name:
Address:
Telephone:
City:
Province or State:
Postal or Zip:
Country:
Email Address:
Type of Company:
Dealer from which Purchased:
Dealer City:
Dealer Province or State:
Restaurant
Bakery
Deli
Butcher
Supermarket
Caterer
Institution (specify):
Invoice:
Other (specify):
Model Name:
Model Number:
Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY):
Would you like to extend the warranty?
Date of Installation (MM/DD/YYYY):
Yes
No
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan
11
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualified local sales
and service representatives who provide convenient access to over 3,500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualifiées et des représentants de service qui offrent un accès facile à plus de 3500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 3,500 productos con origen a nivel mundial.
Download PDF
Similar pages