Dishwasher
User manual
DW51600SS
DW51600FBI
DWT 51600 SS
DWT 51600 FBI
DWT 51600 W
Dishwasher
User manual
DW51600SS
DW51600FBI
DWT 51600 SS
DWT 51600 FBI
DWT 51600 W
To prevent accidents, which could cause serious injury or death, as well
as machine damage read these instructions before installation and / or
use.
CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS
1
3. GETTING TO KNOW YOUR DISHWASHER
4. LOADING THE DISHWASHER
4
5
2. RECYCLING
3
4.1 UPPER RACK
4.2 LOWER RACK
4.3 PROPER AND IMPROPER LOADING OF DISHWARE
8
11
17
5. WHAT SHOULD NOT BE WASHED IN YOUR DISHWASHER
6. OPERATING THE PRODUCT
18
19
6.1 KEYS
20
6.2 PREPARING THE MACHINE
20
6.3 PROGRAM SELECTION
20
6.4 AUXILIARY FUNCTIONS
22
6.5 SCHEDULING THE WASHING TIME
23
6.6 STARTING THE PROGRAM
24
6.7 CANCELLING THE PROGRAM
25
6.8 SALT INDICATOR (
)25
6.9 RINSE AID INDICATOR ( )25
6.10 END OF PROGRAM
26
6.11 WATER CUT-OFF WARNING
26
6.12 OVERFLOWING WARNING
26
7. DETERGENT
27
8. ADJUSTING THE WATER SOFTENING SYSTEM
9. FILLING THE DISHWASHER SALT DISPENSER 10. CARE AND MAINTENANCE
30
31
33
7.1 ADDING DETERGENT
7.2 TABLET DETERGENTS
7.3 RINSE AID
10.1 CARING FOR YOUR DISHWASHER EXTERIOR
10.2 CARING FOR YOUR DISHWASHER INTERIOR
10.3 CLEANING THE FILTERS
10.4 CLEANING THE HOSE FILTER
10.5 CLEANING THE WASH ARMS
27
28
29
33
33
34
35
35
11. TROUBLESHOOTING
36
12. TECHNICAL FEATURES
41
13. WARRANTY STATEMENT FOR THE BLOMBERG DISHWASHERS42
14. HOW TO GET SERVICE
44
1. IMPORTANT SAFETY
INSTRUCTIONS
INTRODUCTION
Please read this user manual and
particularly the safety instructions
completely and carefully. They will save
you time and effort and help to ensure
optimum dishwasher performance.
A
Be sure to observe all listed warnings
and cautions. Look particularly for the
icons with exclamation marks inside.
The information icon will also provide
important references.
WARNING: Indicates a
potentially hazardous
situation which, if not
avoided, could result in death
or serious injury.
CAUTION: Indicates a
potentially hazardous
situation which, if not
avoided, may result in injury.
It may also be used to alert
against unsafe practices.
NOTICE: Indicates a
potentially hazardous
situation which, if not
avoided, may result
in damage to the
dishwasher, the tableware, the equipment or the
environment.
A
••
A
••
C
••
••
••
••
••
••
1
USA
WARNING:When using the
dishwasher, follow basic
precautions, including the
following:
Read all instructions before
using the dishwasher! Save
these operating instructions
and pass them on to any
future user.
Use the dishwasher only for its
intended purpose as described in
this user manual. This appliance
is intended for normal household
use only.
The manufacturer disclaims
responsibility for damage or
injury caused by improper use
of this appliance.
The information in this user
manual must be followed to
minimize the risk of fire or
explosion and to prevent property
damage, personal injury or loss of
life.
Do not operate your dishwasher
unless all the enclosure panels are
properly in place.
Do not tamper with the controls.
Do not abuse, sit on, stand in or
on the door or dish rack of the
dishwasher.
The cup racks are designed to
support cups, glasses and kitchen
utensils. When the cup racks are
in the dishwasher do not lean on
or use the cup racks to support
your body weight.
To reduce the risk of injury, do not
allow children to play in, on or near
the dishwasher.
••
••
••
••
••
••
••
••
••
Use only detergents or rinse
aids recommended for use in a
household dishwasher and keep
them in a dry place out of the
reach of children. Check that the
detergent dispenser is empty
after the completion of each wash
program.
Dishwasher detergents contain
chemicals that can cause
sickeness and may be if they are
inhaled or swallowed. Also, be
careful when opening the door
due to hot steam that is producded
during operation. Consult a doctor
immediately if detergent has been
swallowed or inhaled.
if the hot water has not been used
in several weeks, we recommend
running the hot water taps to
remove any built up hadrogen
gases.
Do not store or use flammable
liquids or vapors in the area of the
dishwasher.
When loading items to be washed,
position sharp items so that they
are not likely to damage the door
seal and load sharp knives with
the handles up to reduce the risk
of cut-type injuries.
Do not wash plastic items unless
they are marked “dishwasher
safe” or the equivalent. For plastic
items not so marked, check the
manufacturer’s recommendations.
If a malfunction occurs, switch
off the appliance and turn off the
water supply to the dishwasher.
Please do not attempt to carry the
dishwasher by yourself in order
to avoid potential injuries. Two or
more people are needed to move
a dishwasher.
Before cleaning or carrying out
maintenance, switch off the
appliance, disconnect the power
2
••
••
••
plug and turn off the water supply.
Repairs and technical
modifications must be carried
out exclusively by a Authorized
technician.
If the dishwasher is not in
use for an extended period of
time (i.e. vacation home), we
recommend remove all items
from the dishwasher, leave the
door cracked open to allow air
to circulate and turn off both the
power and water supply to the
dishwasher.
This appliance comes with a
three prong NEMA 5-15P 15A
power cord. It must be connected
to a Grounded and Polarized
wall receptacle that has been
installed and tested by an licensed
electrician and that it has been
installed based on all Local, State
and Federal Electrical codes.
WARNING:Improper
connection of the equipmentgrounding conductor can
result in a risk of electric
shock. Check with a qualified
electrician or service
representative if you are in
doubt whether the appliance
is properly grounded. Do not
modify the plug provided with
the appliance, if it will not
fit the outlet, have a proper
outlet installed by a qualified
electrician.
A
••
USA
This appliance produces ozone
within the washing compartment
during normal operation. Longterm exposure to ozone or
exposure at elevated levels may
result in respiratory problems,
especially for the infirmed, elderly
and children.
••
••
2. RECYCLING
Chidren should not operate this
machine without adult supervision.
Be Careful to not leave the door
fully open when not being loaded
or unloaded to prevent someone
from tripping on the unit.
WARNING:If your
dishwasher is equipped with
internal illumination, lamp
should only be replaced by
the Authorized Service Agent
in case of failures that may
occur on the lamp.
WARNING:Warning:
This product may contain
chemicals known to the state
of California to cause cancer
or birth defects or other
reproductive harm.
••
A
••
A
••
••
SAVE THESE INSTRUCTIONS
••
••
••
••
••
Service should be performed
by a qualified installer. Work by
unqualified persons could be
dangerous and may void the
warranty.
Do not operate the appliance if
damaged, malfunctioning, partially
disassembled or if it has missing
or broken parts.
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
“tripping” the circuit breaker or
removing the fuse.
For safety reasons, dishwasher
must be secured to adjacent
cabinetry using the brackets
provided. Failure to do this may
cause damage to property or
bodily injury.
Do not use any extension cord or
portable outlet device to connect
the dishwasher to a power supply.
••
Remove the door to the washing
compartment when removing
an old dishwasher from service
or discarding it. Ensure that the
appliance presents no danger to
children while being stored for
disposal.
Remove the door lock or door of
the washing compartment before
disposing dishwasher so that
children or small animals can not
trapped inside.
Old appliances may contain
materials that can be recycled.
Please contact your local recycling
authority about the possibility of
recycling these materials.
Please check the water supply
line periodically. It is susceptible
to breakage. It becomes less
flexible as time goes by.Replace
it immediately when it is torn, cut,
swollen or there is water leakage.
Please keep the dishwasher
package out of the reach of
children after unpacking it.
WARNING:Danger of
suffocation! Ensure that
any plastic wrappings,
bags, small pieces etc. are
disposed of safely and kept
out of the reach of children.
A
3
USA
3. GETTING TO KNOW YOUR DISHWASHER
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Cutlery basket
5. Door
6. Model and Serial Tag
7. Control panel
8. Detergent and rinse agent dispenser
9. Lower basket
10. Filters
11. Salt container (Select Models)
12. Upper basket rail
13. Upper cutlery basket (Select Models)
14. Tabletop (Select Models)
15. Turbo fan heat drying system (Select Models)
4
USA
15
Upper rack (International Pattern)
4. LOADING THE
DISHWASHER
1. Pull the handle to open the door.
If the door is opened during
operation, the dishwasher will stop
running. Once the door is closed
the program will continue.
2. Remove coarse food leftovers
from tableware.
3. Now you can load the dishwasher.
Upper rack (Standard Pattern)
International Loading Pattern – Top
rack (12 place settings)
Lower rack (International Pattern)
Top rack load pattern for 12 place
settings according to the AHAM DW-1
Standards
Lower rack (Standard Pattern)
International Loading Pattern – Bottom
rack (12 place settings)
Bottom rack load pattern for 12 place
settings according to the AHAM DW-1
Standards
5
USA
Upper cutlery basket (Select
Lower rack (Select Models)
Models)
Additional Loading Pattern – Bottom
rack (10 place settings)
International Loading Pattern – Upper
cutlery basket (12 place settings)
Upper cutlery basket (Select
Upper rack (Select Models)
Models)
Upper cutlery basket (MODEL
DEPENDING)
Additional Loading Pattern – Top rack
(10 place settings)
International Loading Pattern – Upper
cutlery basket (10 place settings)
6
USA
A
A
A
C
••
••
••
••
••
••
••
CAUTION:Large knives and
other utensils with sharp tips
and edges must be placed
horizontally into the upper
rack due to risk of injury.
Other smaller knives and
sharp utensils should be
placed with sharp side down
in the cutlery basket.
CAUTION:Use extreme
caution when removing
knives and other sharp
utensils from the dishwasher.
These items may have
shifted position during the
wash program, and may be
wet or slippery.
CAUTION:Hot steam can
escape! Danger of serious
burns or other injury.
NOTICE: 3rd basket should
be removed out of the
dishwasher during the tests
according to AHAM DW-1.
Your dishwasher holds a maximum
of 12 place settings.
Place all containers such as
cups, glasses and pots into the
dishwasher with the opening
facing downwards (so that no
water can collect).
Small and light items can go into
the upper rack.
Long and narrow items are placed
in the middle of the racks.
Place all large and very dirty items
in the lower rack.
Load dishes accordingly and be
careful when loading glasses so
they do not hit each other during
the wash cycle. Also, make sure
that both wash arms are not in
contact with any dishware.
7
USA
Do not overload your dishwasher
and pay attention to manufacturer
instructions regarding dishes
which are appropriate for use in for
a dishwasher. Only with suitable
dishes (mentioned in section 5)
will you obtain optimal washing
results with a sensible use of
energy.
4.1 UPPER RACK
Load the upper rack with dessert
plates, cups, glasses etc.
ADJUSTABLE SHELVES
(Select Models)
Depending on the size of the glasses
and cups, the shelf height setting may
be adjusted.
1. Fold the shelf upwards A.
2. Positioning at the desired height B.
3. Fold the shelf again downwards C.
8
USA
COLLAPSIBLE UPPER BASKET
WIRES
(Select Models)
You can use collapsible wires when
you need a larger space for your
dishes in the upper basket of your
machine.
To bring the collapsible wires into
horizontal position, grab the wire from
the middle position and push them
in the direction of arrow in the figure.
Place your larger dishes into the area
created. To bring the wires back to
vertical position, just lift them up.
UPPER BASKET MULTIPURPOSE
SERVICE RACK
(Select Models)
This accessory located at the upper
basket of your machine allows you to
easily wash pieces such as extra long
ladles and bread knives.
You can lift up the upper basket
multipurpose service rack to remove it
if you do not want to use it.
C
Bringing the wires to the
horizontal position by
holding them from the
tips may cause them to
bend. Therefore, hold the
wires from their stems
while bringing them to
the horizontal or vertical
positions.
If you want to use the upper basket
multipurpose service rack again, you
can easily attach it to the side section
of your upper basket.
9
USA
ADJUSTING THE HEIGHT OF THE
UPPER BASKET
(Select Models)
The upper basket height adjustment
mechanism has been designed for
you to create large spaces in the lower
or upper sections of your machine
depending on your needs by adjusting
the height in the upper or lower
direction while your basket is empty or
loaded.
Thanks to this mechanism, you can
use your basket in three different
positions, namely lower, middle and
upper positions (1, 2, 3).
1. To raise your basket, hold the
upper basket wires with both hands
while the basket is in the lowermost
position and pull them up (A).
2. You will hear a "Click" from
the right and left mechanisms,
indicating that the basket has
reached the next level. Release the
basket.
Repeat the process if the height is not
sufficient.
To lower the basket, while it is in the
uppermost position;
1. Hold the upper basket wires with
both hands, slightly lift up the
basket and simultaneously push
and release the latches shown in
the figure (B).
1
2. Lower
the basket from its current
position to the lower one.
2
3. Release the basket after it has
reached
one level down.
3
Repeat the process if the height is not
sufficient.
C
1
C
2
3
10
USA
The movement mechanism
may not function properly
if the upper basket is
overloaded or if the weight
distribution is not balanced.
In heavier conditions, there
is the risk of falling one level
down.
Make sure that the
adjustment mechanism has
the same positions on the
right and left sides of the
upper basket.
HEIGHT SETTING
(Select Models)
In certain models, the height setting of
the upper rack may be changed using
the wheels which are present at two
height levels.
CAUTION:Make sure that
the rack is empty. Changing
the height setting while the
rack contains tableware
could cause the contents to
dislodge, causing personal
injury or damage to the
tableware.
A
4. Push the latches back into the
correct position.
4.2 LOWER RACK
1. Release the latches on both the
right and left tracks of the upper
rack by turning them to the outside
A.
Use the lower rack for plates, bowls,
pots etc.
2. Pull out the rack completely B.
3. Place the rack into the tracks
again at the desired height C.
11
USA
COLLAPSIBLE LOWER BASKET
TINES
(Select Models)
There are foldable tines (A) located
at the lower basket of the machine
are designed for an easier placement
of large pieces such as pans, bowls,
etc. You can create larger spaces by
folding each tines individually or all of
them at once.
COLLAPSIBLE LOWER BASKET
TINES
(Select Models)
There are foldable tines (A) located
at the lower basket of the machine
are designed for an easier placement
of large pieces such as pans, bowls,
etc. You can create larger spaces by
folding each tines individually or all of
them at once.
To bring the collapsible tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows (B). To bring the
tines back to vertical position, just lift
them up. Collapsible tines will click into
the latch again (C).
To bring the collapsible tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows (B). To bring the
tines back to vertical position, just lift
them up. Collapsible tines will click into
the latch again (C).
C
C
Bringing the tines to the
horizontal position by
holding them from the
tips may cause them to
bend. Therefore, it will be
appropriate to bring the tines
in the middle to horizontal or
vertical position by holding
them from their stems and
pushing in the direction of
arrow.
12
USA
Bringing the tines to the
horizontal position by
holding them from the
tips may cause them to
bend. Therefore, it will be
appropriate to bring the tines
in the middle to horizontal or
vertical position by holding
them from their stems and
pushing in the direction of
arrow.
SILVERWARE BASKET
(Select Models)
Silverware basket is designed to wash
your dishes such as knife, fork, spoon,
etc. in an efficient manner.
Since the silverware basket can be
moved (A, B), you can create more
space while placing your dishes in the
lower basket and free up space for
your dishes of different sizes.
SILVERWARE BASKET
(Select Models)
Silverware basket is designed to wash
your dishes such as knife, fork, spoon,
etc. in a cleaner manner.
Since the cutlery basket can be moved
(A, B), you can create a wider space
while placing your dishes to the lower
basket and free up space for your
dishes in different sizes.
C
13
USA
NOTICE: When finished, test
to ensure that the spray arm
can still move freely.
TRAY WASH SUPPORTS
(Select Models)
Use the supports to wash trays in the
bottom basket.
See the Auxiliary functions section
for appropriate program and function
selection.
SOFTTOUCH ACCESSORY
(Select Models)
The SoftTouch Accessory found in the
lower basket of your machine enables
a safe washing for your fragile glasses.
LOWER BASKET BOTTLE WIRE
(Select Models)
The bottle wire is designed for easier
washing of long pieces with wide
mouths. You may take out the bottle
wire from the basket when not in use
by pulling it out from both sides (H).
LOWER BASKET GLASS HOLDER
(Select Models)
Lower Basket Glass Holder found
in the lower basket of your machine
enables a safe washing for your
oversized and tall glasses.
14
USA
LOWER BASKET MULTIPURPOSE
/ HEIGHT ADJUSTABLE SERVICE
RACK
(Select Models)
This accessory located at the lower
basket of your machine allows you
to easily wash pieces such as extra
glasses, long ladles and bread knives.
To close the racks:
1. Fold the rack (A).
2. Slide the rack up (B).
3. Put the rack in vertical position (C).
4. Slide the rack down and lock it by
the tabs (D).
C
You may open the racks in
the same process in reverse
order.
To adjust the height of the racks:
1. Fold the rack (E).
2. Slide the rack up (F).
3. Open the rack at the desired level
(G).
C
A
You may use the racks as
required by moving them to
lower or upper position, or
close them to create a wider
space in your lower basket.
Make sure that the impeller
does not touch the dishes
you placed on the racks.
15
USA
CEILING CUTLERY BASKET
(Select Models)
Ceiling cutlery basket is designed
to wash your cutlery items such as
forks, spoons and etc. by placing them
between the bars on the basket.
When the central tray is in the lower
position, you can load long/high items
such as coffee cups, ladles, etc. on the
tray. When the side trays lean on two
side walls, the handle can be pulled
to allow the central tray to rise and the
system to be locked.
CEILING CUTLERY BASKET
(Select Models)
Ceiling cutlery basket is designed
to wash your cutlery items such as
forks, spoons and etc. by placing them
between the bars on the basket.
1
In models with partial movement
feature, pushing the bar (1) on the
handle enables the central tray of the
basket to get to the lower position and
the system gets unlocked. Thus right
and left side trays can be used as
moving parts.
The free space enabled by the side
trays allows long parts to be loaded in
the upper basket.
16
USA
4.3 PROPER AND IMPROPER LOADING OF DISHWARE
6 4 4
3 2
3
1: Salad Fork
2: Teaspoon
3: Dinner fork
4: Knife-solid handle
5: Serving spoon
6: Serving fork
2
1
1
1
1
2
4 4
4
3
3
3
2
4
3
2 2
2 2
2
2 1 1
1 2
2
2 1
1 2
2 1 1
2
2 1
2
2 2
2 2
3 2 3
5
3
4 4 4
3 2 3
3
5
4 4 4
Sliding Cutlery Basket load pattern for 12
place settings according to the AHAM DW-1
Standards
••Place all containers such as cups, glasses and pots into the dishwasher with
the opening facing downwards (so that no water can collect).
••The movement of the spray arms must not be hindered.
••Do not overload your dishwasher.
••Only with suitable dishes (mentioned in section 5) will you obtain optimal
washing results with a sensible use of energy.
incorrect
incorrect
incorrect
incorrect
17
USA
5. WHAT SHOULD NOT
BE WASHED IN YOUR
DISHWASHER
••
••
••
••
••
••
••
••
••
Rust-sensitive steel parts like iron
and cast iron that can rust and
stain other utensils and damage
the interior stainless steel liner
of the dishwasher and void the
warranty. Do not wash copper,
brass, pewter, bronze or tin.
Cutlery with wooden or horn
handles and cutlery with motherof-pearl or porcelain handles will
deteriorate over time if put in the
dishwasher.
Plastics may lose their shape
or color with hot water, please
follow the instructions of plastic
manufacturers. Be sure that plastic
items are marked “dishwasher
safe”.
Glued dishes or cutlery are not
suitable for machine washing
since certain adhesives may get
soft or dissolve with hot water.
Aluminum may fade over time.
Minerals in water and detergent
may cause the aluminum to
darken or spot.
Sterling silver articles should not
be washed in the dishwasher
because they tend to discolor
and become dull by dishwasher
detergent.
Silverware and stainless steel
items should not be in contact with
each other. Mixing these items can
cause staining. Remove and hand
dry these items immediately when
the program ends.
Decorated glasses, porcelain, fine
china and china with gold rims
are sensitive to machine washing.
They may lose their patterns and
colors over time.
18
••
••
••
Crystal and very fine glassware
may become opaque (etch) losing
their shine over time. You may
prefer to wash them by hand.
Do not wash sponges or dish
cloths in dishwasher.
Do not wash art and craft articles
in dishwasher.
Disposable plastics and
disposable aluminum cannot
withstand high temperatures; do
not wash them in the dishwasher.
CAUTION: If in doubt,
wash by hand or follow
the instructions from the
manufacturer of utensils,
dishes, glasses or pots and
pans.
Do not wash items soiled
with cigarette ash, candle
wax, varnish, paints or
chemicals since they can
damage your dishwasher.
A
C
NOTICE: We recommend
when buying new dishware,
try to choose ones that are
suitable for machine washing
(marked as dishwasher
safe).
CARING FOR YOUR TABLE-WARE
The combination of high temperatures
and dishwasher detergent may cause
damage to some items if they are
washed in the dishwasher. Remember,
if there is any doubt about any aspect
concerning items to be washed in the
dishwasher, follow the instructions from
the manufacturer of the items, or wash
the items by hand.
USA
6. OPERATING THE PRODUCT
1
2
3
4
5
6
13 12
C
7
8
11
3
9
10
NOTICE: If you do not perform any operation after switching on the
machine, it will be automatically switched off within 5 seconds.
1. On/Off key
2. Program Selection / Program Cancel (3 seconds) key
3. Function keys & indicators
F1 Half Load Function
F2 Sanitize Function
F3 Extra Rinse function
F4 Rapid Clean Function
4. Program indicator
5. Salt indicator (Select Models)
6. (Not in use)
7. Start / Cancel indicator
8. Time Delay / Program Time indicator
9. Time Delay key
10.Time Delay indicator
11. End of Program indicator
12. (Not in use)
13.Rinse Aid indicator
19
USA
6.1 KEYS
On/Off key
When you press On / Off key, indicator
lights illuminate on the display for ON
position. The lights turn off in OFF
position.
Program Selection / Program Cancel
key
Press this key until the desired
program appears in the program
indicator.
To cancel the running program open
the door of the product. Press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the
3 - 2 - 1 countdown, 0:01 is displayed,
close the door of the product and wait
for the draining process complete.
Draining is completed in 2 minutes and
the machine gives an audible warning
when it is completed.
Function keys
If you press any of the Function keys
during program selection or time delay
selection, an affirmative key signal will
be heard provided that the relevant
function is supported by the selected
program. Function will be deemed
selected when the indicator of the
selected function is lit.
To cancel the selected function, keep
the function key pressed until the
function indicator disappears.
20
6.2 PREPARING THE
MACHINE
1. Open the door of the dishwasher.
2. Place the dishes in accordance
with the instructions in the user
manual.
3. Make sure that the upper and lower
Wash Arms rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.
6.3 PROGRAM SELECTION
1. Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid
indicators and add salt and/or rinse
aid if needed.
3. Refer to the table of “Program
Table” to determine a washing
program suitable for your dishes.
4. Selected program will start
when you close the door of your
machine.
USA
21
USA
#
72
158
High
+
+
40
8
40
8
25-40
70
140
-
-
+
+
40
8
-
-
-
(°F)
(°C)
(°F)
15-25 ml
ml
tsp
ml
tsp
ml
tsp
15 ml
+ 5 ml
+
+
+
+
128
20,2
5,30
-
-
-
75
15,2
3,80
Main wash
Dry
Sanitize
Duration (minutes)
Water (liters)
Water (gallons)
2,59-5,86
9,8-22,2
110-153
+
+
+
+
3-5
15-25
5
25
5-8
25-40
+
+
-
Medium
142-157
61-67
122-131
50-55
Regular Wash *
2
PROGRAM TABLE
3,10
12
75
-
+
+
+
3
15
3-5
15-25
5
25
-
+
-
Few
149
65
118
48
China/Crystal
3
3,12
11,8
58
-
+
+
-
3-5
15-25
5
25
5-8
25-40
+
+
-
Few - Medium
160
71
117
47
ExpressDry
4
3,10
11,6
35
-
-
+
-
3
15
3
15
3-5
15-25
-
-
+
Few
131
55
113
45
Quick Wash
5
1,20
4,4
12
-
-
-
+
-
-
-
-
-
-
-
-
-
-
0
0
0
0
Rinse & Hold
6
Sensitivity: Public
The consumption values shown in the table were determined under standard conditions. For this reason, deviations are possible under practical conditions. * The energy-usage
label is based on this program.
5-8
-
-
Soft
water
Medium
water
Hard
water
70
162
72
160
(°C)
Pots & Pans+
1
ProCare
0
Wash
Recommended
detergent
amount
Detergent in
dispenser
section
Degree of dirtiness
Rinse Temperatures
Wash Temperatures
Program name
Program number
6.4 AUXILIARY FUNCTIONS
Washing programs of your dishwasher
are designed to obtain the best
cleaning effect, considering the type
of the soiling, soiling degree and
properties of the dishes to be washed.
Auxiliary functions allow you save from
time, water and power.
Auxiliary functions may
cause changes in the
program duration.
C
C
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is not
compatible with the program
will not be active.
Half Load function
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine as
you like. You can use both upper
and lower racks.
2. Turn the machine on with On/Off
key.
3. Select the desired program and
press the Half Load key. The Half
Load indicator will light on the
display in the Function Selected
indicator.
4. Close the door of the machine to
start the program.
Extra Rinse function
Depending on the type of the detergent
used, if a detergent dissolving issue is
encountered it will remove the resulting
stains from the dishes and enables the
optimum rinsing performance.
22
Sanitize Function
Sanitize function raises the water
temperature in the final rinse to
meet the requirements of NSF/ANSI
STANDARD 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for
licensed food establishments.
At the end of a succesfull
sanitization “S“ is displayed
on the display. “S” is not
displayed on the display if
the cycle is interrupted or the
water could not be heated to
the required temperature.
C
C
C
Available programs are
indicated on Program Table
chart.
Note: Only sanitizing cycles
have been designed to meet
the requirements of 6 for
soil removal and sanitization
efficacy.
There is no intention, either
directly or indirectly, that
all cycles have passed
sanitization performance
tests.
Rapid Clean Function
It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.
Interior Lighting
(Select Models)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Continue to press
USA
until the countdown 3, 2, 1 is
completed on the display.
2. Press P+ key to activate the L:
option. The interior lighting is
turned off at "L:0" option and turned
on at "L:1" option. Set the desired
option with the Time Delay key.
3. Turn off the machine with On/Off
key to save the changes.
Automatic Detergent Detection
Feature
The product has a feature to
automatically detect the type of the
detergent and adjust the washing
programe and drying system to the
best performance. If special tablet
detergent is used, the programe
duration can be extended by 20
minutes in order to optimize the
washing and drying performance.
Notice: Automatic detergent
detection feature should be
deactivated during the tests
according to AHAM DW-1.
C
To deactivate:
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Keep them
pressed until the countdown 3, 2, 1
is completed on the display.
2. Press P+ key to activate the
a: option. Automatic detergent
detection feature is disabled at
“a:0” option and enabled at "a:1"
option. Set the desired option by
pressing the Time Delay key.
3. Turn off the machine with On/Off
key to save the changes.
23
Floor illumination
Illuminates to show program is still
running.
(Select Models)
Your machine reflects a light to the
floor during the washing process. This
light turns off after the washing process
is complete.
C
Floor illumination cannot be
cancelled by the user.
C
Factory setting of your
machine is "S:2".
Changing Warning Sound Volume
1. After turning on the machine,
press Time Delay and P / P+
keys simultaneously. Keep them
pressed until the countdown 3, 2, 1
is completed on the display.
2. Press P / P+ key to activate the S:
position.
3. Each pressing on the Time Delay
key will change the warning sound
volume as "S:0" off, "S:1" medium"
and "S:2" high.
4. Turn off the machine with On/Off
key to save the changes.
6.5 SCHEDULING THE
WASHING TIME
Time Delay
If an economical electricity tariff is
applied in your region, you can use
the Time Delay function to wash your
dishes during appropriate hours.
You can delay the start of the selected
program until 24 hours.
1. Press the Time Delay function
key after selecting the washing
program and other auxiliary
functions.
USA
2. Once you press the Time Delay
key, Display Information Line
will show "0:30" and Time Delay
indicator will start flashing.
3. Set the desired time by pressing
the Time Delay key. Time will
increase with increments of 30
minutes up to 6 hours and after
that in 1 hour increments up to 24
hours every time you press the key.
4. Close the door of your machine
after setting the Delayed Start.
Once the delay time is over,
the selected program will start
automatically.
Changing the settings while Time
Delay function is active
While the Time Delay function is
activated, you cannot make changes
in the washing program, auxiliary
functions or the duration of delay time.
Program and auxiliary
functions cannot be set/
changed after the program
has started.
C
To cancel the Time Delay function
Open the door of the product Press
and hold the Program Selection /
Program Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.
You can select and start a
new program following the
cancellation of Time Delay
function.
C
C
6.6 STARTING THE PROGRAM
Close the door of your machine to
start it after selecting the program and
auxiliary functions.
Select Models:
Your machine performs
water softening depending
on the hardness level of
the supply water. Washing
time can change while
the program is running
depending on the ambient
temperature where your
machine is installed,
temperature of the supply
water and amount of the
dishes.
C
C
C
C
Time Delay function cannot
be set after the program
starts.
24
USA
Pay attention not to open the
door of the machine when
it is running. There may
be a rush of vapour when
you open the door of your
machine; be careful.
The machine will be
switched off if no button is
pressed within 5 seconds
after opening the door while
the machine is running.
After the door has been
opened, if any button is
pressed within 5 seconds
and the door is closed, the
selected program resumes;
otherwise, the machine will
be switched off.
Open the door after the
machine has been switched
off, press On/Off button
and close the door within 5
seconds. The program will
resume washing.
C
The machine will remain
silent in pause mode for
some time in order to
remove the water from the
machine and on the dishes
completely and to have the
water softener cleaned, and
then it will resume running in
drying mode.
6.7 CANCELLING THE
PROGRAM
Open the door of the product press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the
3 - 2 - 1 countdown, 0:01 is displayed,
close the door of the product and wait
for the draining process complete.
Draining is completed in 2 minutes and
the machine gives an audible warning
when it is completed.
There might be residues
of detergent or rinse aid
in the machine and/or on
the pieces being washed
depending on the step the
program you have cancelled
was in.
C
6.8 SALT INDICATOR (
)
(MODEL DEPENDING)
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on the
display of your machine.
Adjusting the water hardness
level is explained in Water
Softening System section.
6.9 RINSE AID INDICATOR ( )
Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears
on the display of your machine.
Adjusting the amount of rinse aid
1. After turning on the machine,
press Time Delay and P+
keys simultaneously. After the
countdown (3, 2, 1) is displayed
keep the keys pressed for a while.
2. Press P+ to move to position (P)
on the display.
3. Set to the appropriate level with the
Time Delay key.
4. Press On / Off key to save the
setting.
No rinse aid dispensed in P:0 wash
position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in
P:2 position.
3 doses of rinse aid are dispensed in
P:3 position.
4 doses of rinse aid are dispensed in
P:4 position.
6.10 END OF PROGRAM
C
C
25
USA
When the program you have
selected comes to an end,
an audible warning signal
will warn you to turn off your
machine. This audible signal
will warn you with certain
intervals before it turns off.
End of Program indicator will light up
when the washing program is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the
socket.
C
C
For energy saving, the
machine is automatically
turned off following the
completion of the program or
if the program is not started.
Leave your dishes in the
machine for about 15
minutes to allow them cool
down after they are washed.
Your dishes will dry in a
shorter time if you leave
the door of your machine
ajar during this period. This
process will increase the
drying effectiveness of your
machine.
detect this and E:01 icon will flash on
the Program indicator. As long as the
overflowing continues safety algorithm
will be active and try to discharge the
water. If overflowing stops and safety
is assured, E:01 icon will disappear.
If E:01 does not disappear, there
is a permanent fault. In this case
the authorised service should be
contacted.
ProCare
This program is recommended to
be operated on each 1-2 months for
machine cleaning and necessary
hygiene. The program should be
operated while the machine is empty.
In order to achieve an efficient result, it
is recommended to use together with
special machine cleaning agents.
Do not use this program to
clean dishes. As it operates
in high temperatures, it is
harmful for the dishes.
C
6.11 WATER CUT-OFF
WARNING
If mains water is cut or water inlet
tap is turned off the machine cannot
take water in and E:02 icon will flash
on the program indicator. As long
as the problem continues, washing
program is paused and the water inlet
is checked regularly by the machine;
when the water is restored E:02 icon
will disappear after a while and the
washing program resumes.
6.12 OVERFLOWING
WARNING
If the machine intakes too much
water or there is leakage at any of the
components then the machine will
26
USA
7. DETERGENT
You can use powder, liquid/gel or tablet
detergents in the machine.
Only use in the machine
the detergents produced
particularly for use
with dishwashers. We
recommend you not to use
detergents that contain
chlorine and phosphate
as they are harmful for the
environment.
A
C
7.1 ADDING DETERGENT
C
A
Pay attention to the
warnings on the detergent
packaging to get better
washing and drying results.
Contact the manufacturer
of the detergent for further
questions.
Inside the detergent
dispenser there are level
markings that help you
use appropriate amount of
powder detergent. When
brimful, detergent dispenser
will contain 1.5 Ounces
(45 cm³) of detergent. Fill
detergent up to .5 Ounces
(15 cm³) or .85 ounces
(25 cm³) level marks in
the detergent dispenser
according to fullness of
the machine and/or soiling
degree of the dishes. One
tablet is enough if you are
using detergent tablets.
Do not put solvents into the
detergent dispenser. There
is the risk of explosion!
Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.
1. Push the latch to right to open the
detergent dispenser lid (A).
3. Push the lid of the detergent
dispenser to close it. A "click" will
be heard when the lid is closed.
2. Put suggested amount of powder,
liquid/gel or tablet detergent in the
reservoir.
27
USA
1
C
The best washing
performance in dishwashers
is obtained by using
detergent, rinse aid and
water softening salt
individually.
C
C
Observe the instructions of
the detergent manufacturer
on the package when using
tablet detergents.
2
3
C
Use powder or liquid/
gel detergent in short
programs without prewash
since the solubility of
the tablet detergent
changes depending on the
temperature and time.
7.2 TABLET DETERGENTS
In addition to the conventional
tablet detergents, there are also
commercially available detergent
tablets that show water softening salt
and/or rinse aid effect. Some types
of these detergents contain specialpurpose components such as glass
and stainless steel protectors. These
tablets show their effects up to a
certain water hardness level (21°dH).
Water softening salt and rinse aid
must also be used together with the
detergent if the water hardness level is
above the mentioned level.
28
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly
on your glasses after
the washing program is
over when using a tablet
detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt (Select Models)
and rinse aid reservoirs are full.
2. Set the water hardness to the
highest level and perform an empty
run.
3. After the empty washing cycle,
review the user manual and
readjust the water hardness level
so as to suit the water supply.
4. Make the appropriate rinse aid
settings.
USA
7.3 RINSE AID
C
4. If there are stains on tableware
items after washing, level must
be increased and if there is a blue
trace after wiping them by hand, it
must be decreased. This is set to
position 3 as factory default.
The rinse aid used in
dishwashers is a special
combination that aims to
increase drying efficiency
and prevent water or lime
stains on the washed items.
For this reason, care must
be paid to have rinse aid in
the rinse aid reservoir and
to use rinse aids produced
specially for dishwashers
only.
C
C
1. Open the lid of the rinse aid
reservoir with the help of the latch.
2. Fill the reservoir until “MAX” level.
3. Slightly press the point (B) of the
reservoir lid to close it.
29
USA
The rinse aid adjustment is
described under "Adjusting
the amount of rinse aid" in
the section for operating the
machine.
Wipe clean any spilled
rinse aid outside the
reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.
8. ADJUSTING THE WATER SOFTENING SYSTEM
(Select Models)
Cleaning, rinsing and drying performance of your dishwasher will increase when
water softening system is adjusted properly.
Adjust the new water hardness level according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product according to the steps given below to
determine hardness level of your supply water.
a
b
c
1 min.
d
e
f
1 Second
1 Minute
Remove the test
strip from the
packet.
Turn on the tap and Hold the test strip in Remove the test
let the water run for the water for about strip from the water
about a minute.
a second.
and shake it.
Wait for 1 minute.
The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After
the countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adjust water hardness level according to the hardness of
the supply water. See “Water hardness level adjustment table” for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water French Water
Hardness °dH Hardness °dF
0th Level
0-5
0-4
0-8
1st Level
6-9
5-7
9-13
2nd Level
10-15
8-12
14-22
3rd Level
16-19
13-15
23-27
4th Level
20-24
16-19
28-34
5th Level
25-62
20-50
35-90
Water Hardness Level Indicator
Press the Time Delay key to switch the water hardness level
to position 1. (r1)
Press the Time Delay key to switch the water hardness level
to position 2. (r2)
Press the Time Delay key to switch the water hardness level
to position 3. (r3)
Press the Time Delay key to switch the water hardness level
to position 4. (r4)
Press the Time Delay key to switch the water hardness level
to position 5. (r5)
If the hardness level of the supply water is above 90 °dF or if you are using well
water, then it is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use
salt in your dishwasher. If this is the case, “No Salt Warning Indicator” (if any)
illuminates continuously on the panel of your machine.
If the water hardness level adjustment is set to level 1, the “No salt warning
indicator” will illuminate continuously although it is not necessary to use salt. If
you use salt under this condition, salt will not be consumed and the Salt indicator
will not illuminate.
30 USA
C
If you move your house,
it is necessary to readjust
water hardness level of your
machine by considering the
information given above
according to the hardness
level of the supply water
in your new location. Your
machine will display the
most recently adjusted water
hardness level.
9. FILLING THE DISHWASHER
SALT DISPENSER
(Select Models)
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used
for this purpose.
Use only special softening
salts produced particularly
for the dishwashers in your
machine.
C
C
C
3. Add 4 cups of water to salt
reservoir of your machine only in
initial use (C).
It is recommended to use
granule- or powder-formed
softening salts in the
water softening system.
Do not use salts that do
not completely dissolve in
water such as table salt or
rock salt. Otherwise the
performance of the system
may deteriorate in time.
Salt reservoir will be filled
with water when you start
the product. For this reason,
add salt before operating the
machine.
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed
up dissolution rate of salt in water,
stir it with a spoon.
1. Firstly, take the lower basket out to
add softening salt.
2. Turn the salt reservoir lid counterclockwise to open it (A, B).
31
USA
C
You can put about 4.4
Pounds of softening salt into
the salt reservoir.
C
You need to add salt right
before starting the machine.
Thus, the overflowing
salty water will be flushed
immediately, preventing
the risk of corrosion in
machine. In cases where
you would not start washing
immediately, run your
machine empty in the
shortest program.
5. Replace the lid and tighten it when
the reservoir is full.
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in
water may take a couple
of hours. Therefore, Salt
Indicator remains on for a
while after adding salt into
the machine.
32
USA
10. CARE AND MAINTENANCE
A
A
A
WARNING:Before cleaning
or carrying out maintenance,
switch off the appliance,
disconnect the mains plug
and turn off the water tap.
WARNING:Do not repair
or replace any part of the
dishwasher or attempt any
servicing unless specifically
recommended by this
manual. We recommend
that the dishwasher only be
repaired by an authorized
service agent.
CAUTION :To avoid the
possibility of slipping,
keep the floor around the
dishwasher clean and dry.
Keep your appliance free
from the accumulation of
combustible materials, such
as lint, rags, and chemicals.
If the dishwasher is not in
use for an extended period
of time, we recommend you
check that the baskets are
empty, leave the inside of the
dishwasher clean, the door
cracked open to allow air to
circulate, turn off both the
power and water supply to
the dishwasher.
10.1 CARING FOR YOUR
DISHWASHER EXTERIOR
A
Cleaning the control panel: Use only
soft cloth that is lightly dampened with
mild detergent. Clean the control panel
only with a moist cloth and clear water.
Cleaning the colored doors: Use only
soft cloth that is lightly dampened with
mild detergent.
Cleaning the stainless steel doors:
Use a soft cloth with a cleaner made
for cleaning stainless steel. For the
best results, apply the stainless steel
cleaner to a soft cloth and wipe the
surface in the direction of the grain.
Cleaning the door gasket: Regularly
clean the door gasket with a damp
cloth to remove food particles and
other debris. Use a gentle household
cleaner for the outside and the door
seals, and rinse thoroughly.
10.2 CARING FOR YOUR
DISHWASHER INTERIOR
C
A
CAUTION :Possible
dishwasher damage:
Abrasive cleaners, scouring
pads, abrasive cloths (paper
towels) can damage the
dishwasher decorative door.
33
USA
NOTICE: Cleaning your
dishwasher at regular
intervals ensures longer
product life and reduces the
risk of recurring problems.
Always disconnect the power
to machine before cleaning.
CAUTION :When cleaning
the underside of the main
filter, care must be taken on
the sharp outer edge to avoid
the risk of cut type injuries.
10.3 CLEANING THE FILTERS
Clean the filters at least once a week
in order for the machine operates
efficiently. Check if food residues are
left on the filters. If there are food
residues on filters, take them out and
clean well under running water.
1. Turn the micro filter (1) and coarse
filter (2) assembly counterclockwise
and pull it out from its seating.
4. Clean all three filters under tap
water by means of a brush.
5. Replace the metal/plastic filter.
6. Place the coarse filter into the
microfilter. Make sure that it is
properly seated. Turn the coarse
filter clockwise until a “click” sound
is heard.
C
C
2. Pull out the metal / plastic filter (3)
from the seating.
3. Press the two pawls on the coarse
filter inwards and separate the
coarse filter from the assembly.
34
USA
Do not use the dishwasher
without filter.
Incorrect placement of the
filters will reduce washing
efficiency.
10.4 CLEANING THE HOSE
FILTER
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust,
etc.) can be prevented by means of the
filter attached to the water inlet hose.
Check the filter and the hose regularly
and clean them if necessary.
1. Turn off the tap and remove the
hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its
seat in the hose.
4. Install the hose to tap.
(Select Models)
LOWER WASH ARMS
Check if the holes on the lower
wash arms (1) are clogged. If they
are clogged, remove and clean the
impeller. Pull the lower wash arms up
to remove it.
UPPER WASH ARMS
Check if the holes on the upper
impeller (1) are clogged. If they are
clogged, remove and clean the wash
arms. Turn its nut to left to remove the
upper wash arms.
Make sure that the nut is tightened well
when installing the upper wash arms.
10.5 CLEANING THE WASH
ARMS
Clean the wash arms at least once a
week in order for the machine operates
efficiently.
35
USA
11. TROUBLESHOOTING
Machine does not start.
•• Power cable is unplugged. >>> Check if the power cable is plugged in.
•• Cicuit Breaker is blown. >>> Check the Cicuit Breaker in your house.
•• Water is cut. >>> Make sure that the water inlet tap is open.
•• Door of the machine is open. >>> Make sure that you have closed the door of
the machine.
•• On / Off button is not pressed. >>> Make sure that you have turned on the
machine by pressing the On / Off button.
Dishes are not washed clean
•• Dishes are not placed orderly in the machine. >>> Load the dishes as
described in the user manual.
•• Selected program is unsuitable. >>> Select a program with a higher
temperature and cycle time.
•• Wash arms are stuck. >>> Prior to starting the program, turn the lower and
upper Wash arms by hand to make sure that they rotate freely.
•• Wash arms holes are clogged. >>> Lower and upper Wash arms holes
might be clogged with small food particles and debris. Clean the Wash arms
regularly as illustrated in section “Cleaning and Care”.
•• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
•• Filters are installed incorrectly. >>> Check the filter system and make sure
that it is installed correctly.
•• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.
•• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
•• Detergent is not sufficient. >>> If you are using powder detergent, adjust the
amount of detergent according to the soiling degree of your dishes and/or
program definitions. We recommend you to use tablet detergents for optimum
results.
•• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
•• Detergent dispenser lid is left open. >>> Make sure that the detergent
dispenser lid is closed tightly after adding detergent.
Dishes are not dry at the end of cycle
•• Dishes are not placed orderly in the machine. >>> Place your dishes in a way
that no water will accumulate in them.
•• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
•• Machine is unloaded right after the program is over. >>> Do not unload your
machine right after washing process is completed. Slightly open the door and
36
USA
••
••
wait for evacuation of the steam inside for a while. Unload the dishes after
the pieces cool down to a touchable level. Start unloading process from the
lower basket. Thus, dropping of water remained on a piece at upper basket
onto the pieces at lower basket is prevented.
Selected program is unsuitable. >>> Since rinsing temperature is low at
program with short duration, drying performance will also be low. Select
program with longer duration for a higher drying performance.
Surface quality of the kitchen utensils is deteriorated. >>> Desired washing
performance can not be obtained at kitchen utensils with deteriorated
surfaces and it is not suitable to use such utensils in terms of hygiene
as well. Also, water can not flow easily on deteriorated surfaces. It is not
recommended to wash such kitchen utensils in dishwasher.
It is normal that drying complaints can be experienced with Teflon
kitchen utensils. It is associated with the structure of Teflon. Since the
surface tensions of Teflon and water are different, water droplets will
remain as beads on the Teflon surface.
C
Stains remaining on dishes when cycle has completed.
•• Selected program is unsuitable. >>> Select a program with a higher
temperature and cycle time.
•• Surface quality of the kitchen utensils is deteriorated. >>> Tea and coffee
stains or other dye spots may not be cleaned in dishwasher when they have
penetrated in deteriorated surfaces. Desired washing performance can not be
obtained at kitchen utensils with deteriorated surfaces and it is not suitable to
use such utensils in terms of hygiene as well. It is not recommended to wash
such kitchen utensils in dishwasher.
•• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
Lime traces remain on dishes and glassware gains a misty appearance
•• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid
if necessary. Increase the rinse aid setting if there is enough amount of rinse
aid in the machine.
•• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting.
•• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling
hole while adding salt. Make sure that the salt reservoir lid is tightly closed
after finishing the filling process. Run the prewash program to remove the salt
that spilled inside the machine. Since the salt granules that will remain under
the lid will dissolve during prewash, causing the lid loosen, check the lid once
again at the end of the program.
37
USA
There is a different odor in the machine
C
A new machine has a peculiar odor. It will fade out after a couple of
washing.
••
Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
•• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going
to start the machine right after you have put the dishes into it, remove the
remnants on the dishes and run the Prewash program without detergent
every 2 days. In such cases, do not close the door of the machine completely
in order to avoid odor build up in machine. You can also use commercially
available odor removers or machine cleaners.
Rust, discoloration or surface deterioration occurs on dishes
•• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal
surfaces. Pay attention not to spill salt around the salt filling hole while adding
salt. Make sure that the salt reservoir lid is tightly closed after finishing the
filling process. Run the prewash program to remove the salt that spilled
inside the machine. Since the salt granules that will remain under the lid will
dissolve during prewash, causing the lid loosen, check the lid once again at
the end of the program.
•• Salty food remnants have remained on dishes for a long time. >>> If
silverware soiled with such foods will be kept waiting in machine, dirt must be
removed by prewash or dishes must be washed without being kept waiting.
•• Electric installation is not grounded. >>>Check if your machine is connected
to the actual grounding line. Otherwise, the static electric created in the
product causes arcs on the surfaces of metal items creating pores, removing
the protective cover on the surface and causing discoloration.
•• Intensive cleansers such as bleaches are used. >>> Protective cover on
metal surfaces gets damaged and looses its efficiency in time when it gets in
contact with cleansers such as bleach. Do not wash your dishes with bleach.
•• Metal items particularly such as knives are used for purposes other then
their intended uses. >>> Protective cover on the edges of knives may get
damaged when they are used for purposes such as opening cans. Do not
use metal kitchen utensils out of their intended uses.
•• Silverware are made of low quality stainless steel. >>> Corrosion on such
items is inevitable; they should not be washed in dishwashers.
•• Kitchen utensils that are already corroded are washed in dishwasher. >>>
Rust on a corroded item can migrate to other stainless steel surfaces and
cause corrosion on those surfaces as well. Such items should not be washed
in dishwashers.
38
USA
Detergent remains in detergent dispenser.
•• Detergent dispenser was damp when adding detergent. >>> Make sure that
the detergent dispenser is dried well prior to filling it with detergent.
•• Detergent is added long before the washing process. >>> Pay attention to
add detergent shortly before start-up of the washing.
•• Opening of the detergent dispenser lid is prevented during washing. >>>
Place the dishes in a way that will not prevent the detergent dispenser lid
from opening and the water going into the machine from impellers.
•• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
•• Wash Arm holes are clogged. >>> Lower and upper Wash Arm holes might
be clogged with food remnants such as lemon pips. Clean the Wash Arm
regularly as illustrated in section “Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased.
C
Decorated glasses and decorated luster porcelains are not suitable for
washing in the dishwasher. Manufacturers of glassware and porcelain
tableware items do not recommend washing such kitchen utensils in
the dishwashers either.
Dishes are scratched.
C
••
••
••
Kitchen utensils that contains or are made of aluminum should not be
washed in dishwasher.
Salt leakage exists. >>> Pay attention not to spill salt around the salt filling
hole while adding salt. Spilled salt can cause scratches. Make sure that the
salt reservoir lid is tightly closed after finishing the filling process. Run the
prewash program to remove the salt that spilled inside the machine. Since
the salt granules that will remain under the lid will dissolve during prewash,
causing the lid loosen, check the lid once again at the end of the program.
Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting.
Dishes are not placed orderly in the machine. >>> When placing the glasses
and other glassware into the basket lean them not against other dishes but
the edges or racks of the basket or the glass support wire. Striking of the
glasses to each other or to other dishes due to the impact of water during
washing can cause breaks, or scratches on their surfaces.
39
USA
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
•• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
•• Corrosion has occurred on glass due to soft water. >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting. If your supply water is soft (<5 dH), do not use salt. Choose programs
that wash in higher temperatures (140-149 degress Fahrenheit). You can also
use glass protective detergents that are commercially available.
Foam forms in the machine.
•• Dishes are washed with hand-wash detergent by hand but not rinsed before
placing them into the machine. >>> Hand-wash detergents do not contain
antifoam. There is no need to hand-wash the dishes before placing them into
the machine. Removing the coarse soil on the dishes under tap water, with a
sponge or towel.
•• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care
that rinse aid is not spilled in the machine when you are filling it. Clean any
spilled rinse ait with the help of a tissue paper/towel.
•• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the
rinse aid reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
•• Dishes are not placed orderly in the machine. >>> Load the dishes as
described in the user manual.
•• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.
Water remains in the dishwasher at the end of the program.
•• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
•• Discharge hose is clogged/blocked. >>> Check the discharge hose. If
necessary, remove the discharge hose, clear the blockage and insert is as
illustrated in the user manual.
If you cannot eliminate the problem although you follow the
instructions in this section, consult your dealer or the Authorized
Service Agent. Never try to repair a nonfunctional product yourself.
C
40
USA
12. TECHNICAL FEATURES
Load capacity
Permissible water
pressure
Electrical connection
Total power
Heater power
C
14 place settings
4.35 - 145 psi (0.3 - 10 bars)
120 V (volts), 12 A (amps), 60Hz (hertz)
1400 W (watts)
1100 W (watts)
NOTICE: Because we
continually strive to improve
our products, we may
change our specifications
and design without prior
notice.
This device corresponds to
the following directives:
UL 749 Household
Dishwasher directive.
41
USA
13. WARRANTY STATEMENT FOR THE BLOMBERG
DISHWASHERS
The warranties provided by Blomberg
in these statements only apply to
Blomberg dishwashers sold to the
original purchaser or homeowner in
the US and Canada. The warranty is
not transferable. To obtain warranty
service, please contact our nearest
distributor as listed by state. You
will need your dishwasher model
number, serial number, retailer name
and address, where purchased and
purchase date / installation date. This
warranty gives you specific legal rights,
and you may also have other rights
which vary from state to state.
“This product is fully tested and went
through official quality assurance
inspections before leaving the original
manufacturing site. Warranty terms
for this Blomberg household appliance
is not valid if the product is altered,
tampered, modifed, additional parts
assembled, fixed and re-packed by an
authorized distributor, servicer, a third
party retailer, reseller or by any other
unauthorized person(s)”
1 year * limited warranty from date of
first installation
Blomberg will repair or replace at no
cost to the consumer any defective
parts of the dishwasher if used under
normal household conditions or is
installed at an employee kitchen, office
use, lodges, primary care facilities such
as elderly homes, etc. (warranty is void
if the product is installed high traffic
locations such as dormitories, school
kitchens, restaurants, cafetaries etc.
Please consult Blomberg authorized
distributor prior to operating the
unit about the warranty disclaimer).
42
Service must also be performed
by an authorized Blomberg service
agency. (Cosmetic defects must be
reported within 10 business days from
installation)
2 year * ++ limited warranty from
date of first installation
(Parts only) Blomberg will repair or
replace any parts at no cost to the
consumer if material defects or
workmanship have caused the damage
or failure of these components. Again
the dishwasher must have been
used under normal household
conditions and not commercially as
stated above (Labor charges are the
responsibility of the consumer).
5 year * ++ limited warranty from
date of first installation
(parts only 3-5 years) Blomberg will
repair or replace any circuit boards or
nylon dishwasher racks (excluding
any plastic rack attachments) at
no cost to the consumer if material
defects or workmanship have caused
the damage or failure of these
components. The dishwasher must
have been used under normal
household conditions and not
commercially (Labor charges are the
responsibility of the consumer)
Lifetime limited warranty from date
of first installation * ++
(parts only) Blomberg will repair
or replace to the original owner
the stainless steel tub or door if
rust through occurs under normal
household use and normal water
conditions (no excessive chlorine).
USA
Blomberg may, at its option, also
replace the whole dishwasher with
the same and/or equivalent model
with equal or better functionality if the
original model is no longer available.
(Labor, removal and installation
charges are the responsibility of the
consumer.)
Disclaimers of warranties and
exclusions:
Warranty does not cover service
costs by an authorized service
agent to correct installation,
electrical and plumbing problems
or educational instruction on the
use of the dishwasher. The warranty
also does not cover defects or
damage caused by an act of god
(such as storms, floods, fires,
mudslides, steam protection folio
etc.), damage cause by use of the
dishwasher for purposes other than
those for which it was designed,
misuse, disuse, abuse, accident,
alteration, improper installation,
maintenance, travel fees, service
calls outside normal service hours,
unauthorized service work.
TO THE EXTENT PERMITTED BY
LAW, THIS WARRANTY IS IN LIEU
OF ALL OTHER EXPRESSED AND
IMPLIED WARRANTIES, INCLUDING
THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
BLOMBERG UNDERTAKES NO
RESPONSIBILITY FOR THE
QUALITY OF THIS PRODUCT
EXCEPT AS OTHERWISE
PROVIDED IN THIS WARRANTY
STATEMENT. BLOMBERG ASSUMES
NO RESPONSIBILITY THAT THE
PRODUCT WILL BE FIT FOR ANY
43
PARTICULAR PURPOSE FOR
WHICH YOU MAY BE BUYING THIS
PRODUCT, EXCEPT AS OTHERWISE
PROVIDED IN THIS WARRANTY
STATEMENT.
Blomberg does not assume any
responsibility for incidential or
consequential damages. Such
damages include, but are not
limited to, loss of profits, loss of
savings or revenue, loss of use of
the dishwasher or any associated
equipment, cost of capital, cost of
any substitute equipment, facilities
or services, downtime, the claims of
third parties, and injury to property.
Some states do not allow the
exclusion or limitation of incidental
or consequential damages, so the
above limitations or exclusion may
not apply to you.
*
installation date shall
refer to either purchase date or 5
business days after delivery of the
product to the home, whichever is
later.
++
parts replaced will assume
the identity of the original parts +
their original warranty.
No Other Warranties. This Warranty
Statement is the complete and
exclusive warranty from the
manufacturer. No employee of
Blomberg or any other party is
authorized to make any warranty in
Statement addition to those made in
this Warranty Statement.
USA
14. HOW TO GET SERVICE
Please contact the Distributor for your
State or Province as listed on the
Distributor Contact List, or call our Toll
Free Number at 1 800 459 9848 for
direction to an Authorized Blomberg
Service Agent.
Document Number :
15 9777 01 00_AA_BLOMBERG_D1_USA/ 23-01-18.(15:39)
www.blomberginternational.com
info@blomberginternational.com
Download PDF
Similar pages