Pro Blender
BL450NZ
OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NINJA™ PRO.
WARNING: Extension cords are not
recommended for use with this product.
WARNING: The blades are not
WARNING:
TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR INJURY:
1
2
affixed to the unit. They are removable
and very sharp. Handle with care!
3
CAUTION: ln order to avoid a
4
hazard due to inadvertent resetting of
the thermal cut-out, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
IMPORTANT: This appliance is not
intended for use by persons with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children shall not use or play with this
appliance. Close supervision is necessary
to keep appliance and cord out of reach of
children during use.
5
6
7
8
2
CUSTOMER CARE - NZ: 0800 002 999
WARNING: Remove utensils prior
to processing. Failure to remove may
cause the jar to be damaged or to
shatter which may cause personal
injury.
CAUTION: Do not blend hot liquids,
doing so may cause excessive pressure
build-up, resulting in risk of the user
being burned.
CAUTION: We do not recommend
grinding in any of our Nutri Ninja® Cups.
CAUTION: Remove the Pro Extractor
Blades™ Assembly from the Nutri Ninja
Cup upon completion of blending. Do
not store ingredients before or after
blending them in the cup with the blade
assembly attached. Some foods may
contain active ingredients or release
gases that will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Sip & Seal Lid® to cover.
To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
DO NOT allow the appliance to be used by
children. Close attention is necessary when
used near children. This is not a toy.
Never leave an appliance unattended when
in use.
Remove the power cord from the electrical
outlet when not in use, before assembling
or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power
cord.
9 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
10 NO SERVICEABLE PARTS. Incorrect
reassembly or repair can cause a risk of
electrical shock or injury to persons when
the appliance is used. Contact Customer
Service or Service Center for the repair or
replacement under the warranty agreement.
11 If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid hazard.
12 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
13 Always use appliance on a dry, level surface.
14 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
15 Avoid contact with moving parts.
16 DO NOT attempt to sharpen blades.
17 DO NOT use the appliance if Pro Extractor
Blades Assembly is bent or damaged.
18 To reduce risk of injury, never place the blade
assembly on the base without the proper
attachment.
19 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
20 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
21 DO NOT remove the cup from the motor
base while the appliance is running.
22 To reduce the risk of injury, NEVER operate
the appliance without the blade assembly
in place; DO NOT try to defeat the interlock
mechanism; make sure that the attachment
is properly installed before operating the
appliance.
23 DO NOT expose cups to extreme
temperature changes.
24 DO NOT overfill.
25 DO NOT operate the appliance empty.
26 If the appliance overheats, a thermal switch
will become activated and shut off the motor.
To reset, unplug the appliance and let it cool
down for approximately 30 minutes before
using again.
27 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
28 Appliance accessories are not intended to be
used in the microwave. Do not place the cup
or the lid in the microwave as it may result in
damage to the accessories.
SAVE THESE INSTRUCTIONS
CUSTOMER CARE - AU: 1800 890 840
3
THIS BOOK COVERS MODEL NUMBERS:
BL450NZ 30
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50/60Hz
Power:
900 Watts
Nutri Ninja® Cup Capacity: 500ml
650ml
4
CUSTOMER CARE - NZ: 0800 002 999
GMA-10223EA-006
Contents
Thank you for
purchasing the
Nutri Ninja®
Pro Blender
Getting to Know Your Nutri Ninja Pro Blender�����������������������������������������������������������������������6
Before First Use ����������������������������������������������������������������������������������������������������������������8
Use of the Nutri Ninja Cups�������������������������������������������������������������������������������������������������9
Suggested Uses���������������������������������������������������������������������������������������������������������������10
Care & Maintenance��������������������������������������������������������������������������������������������������������11
Troubleshooting Guide������������������������������������������������������������������������������������������������������12
Warranty ������������������������������������������������������������������������������������������������������������������������15
CUSTOMER CARE - AU: 1800 890 840
5
Getting To Know Your Nutri Ninja® Pro Blender
a
b
c
d
e
a 650ml Nutri Ninja Cup
b 500ml Nutri Ninja Cup
6
CUSTOMER CARE - NZ: 0800 002 999
c Pro Extractor Blades™ Assembly
d Sip & Seal™ Lid (x2)
e Motor Base
The Nutri Ninja® Pro Blender is a high powered innovative tool with a compact design and outstanding performance. It is
perfect for ice crushing, chopping, blending, and nutrient and vitamin extraction*. Blend and go with the convenient Sip &
Seal™ Lids, create delicious drinks to get you out the door quickly. Best results are achieved when you pulse.
FEATURES:
• Nutrient & Vitamin Extraction*
• 900 Watt Motor
• Personalised, healthy drinks and juices on the go
•Sip & Seal Lids for drinks on the go
• Nutri Ninja Cups, BPA Free
• Cord storage
*Extract a nutritious drink containing vitamins and nutrients from fruits and vegetables.
CUSTOMER CARE - AU: 1800 890 840
7
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base is
plugged in for use.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it may
result in damage to the accessories.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lids, Nutri Ninja® Cups, Pro Extractor Blades™
Assembly in warm, soapy water. When washing the Pro
Extractor Blades Assembly, use a dish-washing utensil
with a handle to avoid direct hand contact with blades.
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp.
3 Rinse and air dry thoroughly.
4 The lids, Nutri Ninja Cups, Pro Extractor Blades
Assembly are all dishwasher safe. It is recommended
that the lids and Pro Extractor Blades Assembly be
placed on the top rack. Ensure that the Pro Extractor
Blades Assembly are removed from the containers
before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
8
CUSTOMER CARE - NZ: 0800 002 999
Use of the Nutri Ninja® Cups
WARNING: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not store
ingredients before or after blending in the Nutri Ninja® Cup with the blade assembly attached. Some foods may
contain active ingredients or release gases which will expand if left in a sealed container, resulting in excessive
pressure buildup that can pose a risk of injury. For storage, only use Sip & Seal™ Lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
or
PULSE
REMOVAL
or
Fig. 1
or
Fig. 2
Fig. 3
Fig. 4
Fig. 5
or
Fig. 6
For best results, use short “PULSES”!
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or tabletop.
3 Make sure that the motor base is plugged in for use.
4 Add ingredients to the cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line.
5 Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal. (Fig. 1)
6 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, the unit is ready for use. (Fig. 2)
7 Press down on the top of the cup in short intervals to
activate. (Fig. 3)
8 When you have reached your desired consistency, stop
the appliance by removing your hand from the cup.
9 To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise (Fig. 4) and
pull straight up to remove. (Fig. 5)
10 Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly anticlockwise. (Fig. 6)
11 Do not store blended contents with the Pro Extractor
Blades Assembly attached.
12 Place the Sip & Seal Lid onto the Nutri Ninja Cup, twist
to seal and enjoy.
13 For storage, only use Sip & Seal Lid to cover.
14 Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use.
15 Make sure that the motor base is unplugged when not
in use.
16 To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups.
CUSTOMER CARE - AU: 1800 890 840
9
Suggested Uses
PURPOSE / FUNCTION
SUGGESTED CUP
TYPE OF FOOD
Chopping / Pulsing
500ml Nutri Ninja® Cup
650ml Nutri Ninja Cup
Salsa
Leafy Herbs
Nuts
Chocolate
Grating
500ml Nutri Ninja Cup
650ml Nutri Ninja Cup
Cheese
Mixing
500ml Nutri Ninja Cup
650ml Nutri Ninja Cup
Batters
Dips
Sauces*
500ml Nutri Ninja Cup
650ml Nutri Ninja Cup
Vinaigrettes
Salad Dressings
Simple Sauces*
Frozen Blending
500ml Nutri Ninja Cup
650ml Nutri Ninja Cup
Ice
Frozen Fruit
Ice Cream
Nutrient Juices/Smoothies
500ml Nutri Ninja Cup
650ml Nutri Ninja Cup
Fruits
Vegetables
Leafy Greens
CAUTION: Do not blend dry ingredients unless pulsing for short intervals per the instructions. Continuous blending
dry ingredients will overheat the blender.
* When blending sauces, make sure they’re cooled to room temperature first - Ninja® containers are not intended for hot
blending.
FILLING YOUR NUTRI NINJA®
Want to create smooth and delicious drinks using your Nutri Ninja Cups. Simply
add ingredients to the container in the order they appear in each recipe, or follow
the guideline below when creating your own customised recipes. (Fig. 1)
ice,
frozen ingredients
powders,
nut butters
liquids, yoghurt
leafy greens,
herbs
fresh fruits,
vegetables
Fig. 1
10
CUSTOMER CARE - NZ: 0800 002 999
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash lids, Nutri Ninja® Cups and Pro
Extractor Blades™ Assembly in warm, soapy water.
When washing the Pro Extractor Blades Assembly, use
a dish-washing utensil with a handle to avoid direct
hand contact with blades. Handle Pro Extractor Blades
Assembly with care to avoid contact with sharp edges.
Rinse and air dry thoroughly.
Dishwasher: Containers, lids, and Pro Extractor
Blades Assembly are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are sharp. Contact with the blades’ edges can
result in laceration.
3 Wipe the motor base clean with a damp cloth.
NOTE: If the appliance needs servicing, please call
Customer care at: AUST: 1800 890 840 or
NZ: 0800 002 999.
HOW TO STORE
1 Store the Nutri Ninja Pro Blender upright with the blade
assembly attached to the Nutri Ninja Cup. Do not place
anything on top. Store the rest of the attachments in a
safe place where they will not be damaged and won’t
cause harm. Loosely wrap the power cord around the
cord wrap.
NOTE: Do not store blended or unblended ingredients
in the Nutri Ninja Cup with the blade assembly
attached.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja Pro Blender features a unique safety
system which prevents damage to the unit’s motor
and drive system should you inadvertently overload
your appliance. If the appliance is being overloaded,
the motor will stop. To reset the appliance, follow the
resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no food is
jamming the Pro Extractor Blades Assembly.
3 Allow the appliance to cool for approximately 30 minutes.
4 Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before while making sure
not to exceed the recommended maximum capacities.
CUSTOMER CARE - AU: 1800 890 840
11
Troubleshooting Guide
PROBLEMS
POSSIBLE REASONS & SOLUTIONS
Motor doesn’t start or blade
assembly doesn’t rotate.
• For the cups, make sure that the tabs are seated in the slots and
Food is unevenly chopped.
• Either you are chopping too much food at once, or you are not pulsing
Food is too finely chopped or
too watery.
• The food has been over processed. Use short pulses for best results.
You cannot achieve snow
from ice cubes.
Cup is leaking.
Unit doesn’t turn on.
turned clockwise.
properly. Reduce the amount of food in the cup.
Press down on the cup in short intervals.
• For best results use ice straight from the freezer. Try using short pulses
instead of one long one.
• Make sure the cup is completely dry before adding ice.
• Make sure that your lid or blade assembly is properly assembled to the
cup. Leaking may occur if it is misaligned when twisted onto the cup.
Turn the lid tightly clockwise.
• Make sure the unit is plugged in.
• Rotate and press down on the cup to turn the unit on.
• Make sure the blade assembly is properly assembled to the cup and that
it is not misaligned.
Unit doesn’t turn off.
Doesn’t mix well.
Lid/blade assembly will not
properly align to the cup.
12
• Unplug the power cord from the electrical outlet and call customer
service for support.
• Pulse ingredients for best results. Press down on the cup in short
intervals for even blending and chopping. For frozen ingredients, pulse in
short intervals of 2-5 seconds and repeat.
• Set the cup on a level surface. Place the lid or blade assembly on top of
the cup and align the threads so that the lid/blades sit flat on the cup.
Twist clockwise so that the lid/blades evenly align to the cup until you
have a tight seal.
CUSTOMER CARE - NZ: 0800 002 999
Notes
CUSTOMER CARE - AU: 1800 890 840
13
Notes
14
CUSTOMER CARE - NZ: 0800 002 999
ONE (1) YEAR
LIMITED REPLACEMENT WARRANTY STATEMENT
If your product becomes defective due to faulty material or workmanship within a period of 1 year from the date of purchase,
we warrant to do the following:
•For New Zealand Consumers: We will replace the product with a new product, free of charge, or repair the product
at our cost, at our discretion.
•
For Australian Consumers: Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Your warranty is subject to the following conditions:
•DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or dropped
in water. To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on your own. If the
supply cord is damaged, it must be replaced by a qualified electrician in order to avoid a hazard. Incorrect
re-assembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used.
•The product has not been misused, abused, neglected, altered, modified or repaired by anyone.
•The product has been subjected to fair wear and tear.
•The product has not been used for trade, professional or hire purposes.
•The product has not sustained damage through foreign objects, substances or accident.
Your warranty does not cover:
•Components that are subject to natural wear and tear caused by normal use in accordance with operating instructions.
•Unauthorised/improper maintenance/handling or overload is excluded from this warranty.
•For guarantee claims you will need to submit a proof of purchase in the form of a valid receipt that displays date and
place of purchase.
This warranty does not replace but is in addition to your statutory rights.
This warranty does not apply to accessories supplied with the product.
This warranty applies only to the original purchaser and may not be transferred.
Replacement products will be covered by the limited warranty for the balance of the warranty period from the date of the
original purchase.
Please note:
Only defective product or parts returned to place of purchase will be replaced under this warranty.
New Zealand Contact:
Australia Contact
Brand Developers Limited
Brand Developers Aust Pty Ltd
Unit H, 686 Rosebank Road,
Unit 3, 2 Roussos Place,
Avondale, 1026 Auckland, NEW ZEALAND
Truganina VIC 3029, AUSTRALIA
NZ Customer Care: 0800 002 999
AUST Customer Care: 1800 890 840
CUSTOMER CARE - AU: 1800 890 840
15
Exclusively Distributed
Throughout Australasia by:
Brand Developers Aust Pty Ltd
Unit 3, 2 Roussos Place,
Truganina, VIC 3029, AUSTRALIA
AUST Customer Care: 1800 890 840
Brand Developers Limited
Unit H, 686 Rosebank Road,
Avondale, 1026 Auckland, NEW ZEALAND
NZ Customer Care: 0800 002 999
Copyright © SharkNinja Operating LLC 2016
Printed in China
Ninja and Nutri Ninja is a registered trademark of
SharkNinja Operating LLC.
Pro Extractor Blades and Sip & Seal are trademarks of
SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to change
without notice.
BL450NZ_30_IB_160831_1
GMA-10223EA-006
Download PDF
Similar pages