Durability by Design® TITANIUM &

#
1
1
#
COMBINED QUARTZ
OWNERS MANUAL
QUARTZ ANALOG
COMBINED MANUAL
1 Congratulations! ... Nice Choice!
2 Durability by Design®
You are now the owner of a Bertucci® Performance Field Watch.™ You have something special because
every Bertucci® Watch has been carefully designed, made from only the best materials, and loaded with
premium features. Additionally, Bertucci® Watches are backed up with an industry leading 3 year warranty.
This is the basis for our Promise of Performance™ to you. Please carefully read this manual to familiarize
yourself with your new Bertucci® Watch. Please contact us with any questions you may have. Contact
information is in section 15.
Rugged U.S. Patented
Unibody™ case for
extreme durability
and comfort
Thank You!
Premium precision &
reliable all-metal quartz
movements
Hardened, scratch
resistant crystals
Our Story – Your Watch:
Our story is simple... It’s about building a better watch. It’s a Promise of Performance™ to you that is
derived from a belief that innovative design and attention to detail matter. It is this focus, passion, and
integrity that drive us in the watches we make for you.
If you were to own only one watch... it would be a watch well suited for your life’s endeavors. It would
need to possess the qualities of durability, singularity of purpose, and versatility. Designed to balance form
and function, to be equally rugged and refined, with a classic, understated, enduring style... distinctly a
Bertucci® Field Watch™. Ready to survive the day to day challenges that come your way... wherever they
may be.
Equipped with U.S.
Patented long lasting
high performance band
*Manufactured using one of more of the following U.S. Pat. No: 488388, 488075, 488724, 582296, 609586, 645766, 7832605, 8,960,510,B2 and other patents pending.
3 TITANIUM & STAINLESS STEEL CASES
Screw Down Crown Setting Instructions:
A-1S, A-2S, M-1S, A-1T, A-2T, A-3T,
A-4T, M-1T, B-1T, C-1T, D-1T
1
2
3
4
(Note: A red crown clip may be on setting crown - please carefully remove.)
1 T
urn crown counter clock-wise to unscrew (see fig.1 to the right). The crown is completely unscrewed
when it turns freely. (Note: If crown is already in the out position or unscrewed, with second hand stopped, go to step 2.)
5
2 Gently and carefully pull crown out to stop second hand. Do not pull too hard (fig. 2).
IMPORTANT!
It is critical that
the crown is
screwed down.
3 Rotate the crown clock-wise advancing the hour and minute hands to set the desired time (fig. 3).
4 Push crown in to re-start second hand (fig. 4).
5 P
ush in again and turn crown clock-wise to engage threads. Continue to turn clockwise to firmly screw/
re-thread down crown. (A screwed down crown will prevent water damage to the movement.)
Do not overtighten (fig. 5).
4 TITANIUM & STAINLESS STEEL CASES
Correct
1
M-1S, A-2T, A-4T
Screw Down Crown Setting Instructions: w/ DATE
Incorrect
Properly screwed down
crown (setting knob).
2
Not screwed down
crown.
3
1
(Note: A red crown clip may be on setting crown - please carefully remove.)
1 T
urn crown counter clock-wise to unscrew (see fig. 1 to the right). The crown is completely unscrewed
when it turns freely. (Note: If crown is already in the out position or unscrewed, with second hand stopped, go to step 2.)
2 Gently and carefully pull crown to 1st position. You will feel a “click” (fig. 2). Do not pull too hard.
3 T
urn crown clock-wise or counter clock-wise (depending on the model) to advance the date... continue to
advance the date to yesterday’s date (fig. 3).
4 C
arefully pull the crown out further to 2nd position for a second “click.” Rotate the crown clock-wise to
advance the time past midnight and you will see the date advance to today’s date. Continue to advance
to set the desired time. This will ensure the AM/PM is correct (fig. 4). Note: Date will need to be reset
for months not ending with 31 days.
5 Push crown in to re-start second hand (fig. 5).
6 P
ush in again and turn crown clock-wise to engage threads. Continue to turn clockwise to firmly screw/
re-thread down crown. ( A screwed down crown will prevent water damage to the movement.)
Do not overtighten (fig. 6).
4
5
2
6
IMPORTANT!
It is critical that
the crown is
screwed down.
Correct
Properly screwed down
crown (setting knob).
5 FIBER REINFORCED POLY-RESIN / POLYCARBONATE CASES
Push In Crown Setting Instructions:
Incorrect
Not screwed down
crown.
A-2R,
A-3P
Note: Case back is engraved with the case type
(Note: A red crown clip may be on setting crown - please carefully remove.)
1 Gently and carefully pull crown out to stop second hand.
(Note: If crown is already in the out position, with second hand stopped, go to step 2.)
2 Gently and carefully pull crown out to stop second hand. Do not pull too hard.
3 T
urn crown clock-wise or counter clock-wise, moving hour and minute hands, to set to the desired time.
4 P
ush crown in to re-start second hand.
6 FIBER REINFORCED POLY-RESIN / POLYCARBONATE CASES
A-5P
Push In Crown Setting Instructions: w/ DATE
(Note: A red crown clip may be on setting crown - please carefully remove.)
1 Gently and carefully pull crown out to stop second hand.
(Note: If crown is already in the out position, with second hand stopped, go to step 2.)
2 G
ently and carefully pull crown halfway out. You will feel a “click”. Do not pull too hard.
(See section 4 step 2).
3 T
urn crown clock-wise or counter clock-wise (depending on the model) to advance the date, continue to
advance the date to yesterday’s date. (See section 4, step 3).
4 C
arefully pull the crown out a bit further for a second “click”. Turn the crown clock-wise to cycle the time
past midnight, you will see the date advance to today’s date. Continue to advance to set the desired
time, this will ensure the AM/PM is correct (See section 4 step 4).
5 Push crown in to re-start second hand.
(over)
6 Water Resistance:
7 Replacement Bands Available:
Your Bertucci Watch has been carefully designed and tested to be used in water. 86 P.S.I.A., 160 P.S.I.A.,
or 320 P.S.I.A. (equals immersion to 50 meters/ 164 feet, 100 meters/328 feet or 200 meters/ 656
feet below sea level) if crown is pushed in or screwed down. See case back and/or dial for the water
resistance of your watch.
®
Genuine U.S. Patented Bertucci® Watch Bands are available in a variety of
materials and design types. For a full array of replacement bands and for
more information go to the REPLACEMENT BANDS page on our web sites:
bertucciwatches.com or tridurawatchband.com
1.Never adjust crown (setting knob) when watch is wet or submerged in water.
2.Never wear the watch unless the crown is completely screwed down or pushed in.
3.The watch is water resistant only as long as crystal, crown and case are intact and undamaged.
4. Your Bertucci® Watch has been designed to be worn during activities in which the watch will be exposed
to water and submersion in water. However, the watch is not a professional diver watch and should not
be used for diving.
8 Care for your Bertucci® Watch:
2. W
e recommend rinsing your watch and band with fresh water after exposure to salt water,chlorinated
water, chemicals, soil loads or dust.
3. Never adjust crown when watch is wet or submerged in water.
4. K
eep watch clean and free of debris. Use mild hand dish soap & warm water with a soft brush to clean.
Note: Keep setting crown screwed down or pushed in.
BATTERY
& BAND
6. If watch has stopped, bring it to a local professional jeweler forbattery replacement
or contact
us for
battery replacement service. See Battery Information in section 10.
Consumer Service
™
7. D
o not expose your watch to intense magnetic fields and vibration such as loudspeakers and otherelectromagnetic devices.
8. When setting your watch, handle the crown gently as this is a precision device.
9. Do not subject your watch to severe impact, avoid dropping.
REPAIR & REFURB
Consumer
Service
1 0. If watch is not in use for an extended time period, unscrew and/or pull crown out,
stopping second
hand, to conserve battery life.
9 Warranty:
Every Bertucci® Watch is carefully designed, manufactured and inspected to
ensure it meets our Promise of Performance™ to you. This is backed up by a 3
year warranty. In the event of a malfunction, please follow these steps.
WARRANTY
Step 3 P
lease have the battery checked by a local professional jeweler or consider our Battery & Band
replacement program in section 10 and our web site. Most malfunctions are simply battery
related. If the battery is good, and watch is still not functioning correctly, please follow next Step 4.
Step 4 P
lease return the defective watch (just the watch head, remove the band) to the retail dealer or
send to us for exchange or repair. Please use the Warranty Form (PDF download available on our
web site: bertucciwatches.com) or include a note with the same information.
Send the malfunctioning watch to:
12 Repair Information:
We offer complete repair service to keep your Bertucci® Watch in top
performing condition.
BATTERY & BAND
™
QR code to
go to our
Consumer
Service
warranty info page on our
site from your device.
REPAIR & REFURB
Consumer Service
See web site for more information.
REPAIR SERVICE: If your watch requires repair service, we can run a diagnostic on the
watch to
WARRANTY
determine the issue and contact you with the repair estimate.
Consumer Service
OUT OF WARRANTY REFURBISHMENT PROGRAM: Should your watch be out of warranty (more than 3
years old), damaged severely, deemed overly abused, or water damaged as a result of not screwing the
crown down or pushing in, we offer our refurbishment program. The way it works is as follows – Send
us your out of warranty or damaged watch (remove the band) to the BCS address, in section 9, c/o
Refurbishment Dept., You will receive:
• refurbished, re-certified and cleaned watch head. • new band • new battery • 1 year warranty
Note: Y
ou may not get your exact watch back, but of equal or better condition, if original watch can not
be repaired.
15 Contact Information:
askenzo@mhbertucci.com
866-665-7327
www.bertucciwatches.com
www.ultimatefieldwatch.com
Replacement Band Sizing Matrix:
Case Type:
M-1
A-1
A-2
A-3
A-4
A-5
B-1
C-1
D-1
5"
- 17mm
8
3"
- 19 mm
4
7"
- 22 mm
8
1" - 26 mm
10 Battery Information:
Step 2 D
etermine whether your watch has been abused. If not abused, please follow the remaining steps.
If the watch is abused please refer to our Repair & Refurbishment programs and/or our web site.
Please contact us with any questions at 866-665-7327 or
email us at askenzo@mhbertucci.com.
TRIDURA™
Consumer Service
Step 1 D
etermine whether your watch is in warranty. If your watch is in warranty, please follow the
remaining steps. If it is NOT in warranty, please refer to our Repair & Refurbishment program
below and/or our web site: bertucciwatches.com
BCS
c/o Warranty Dept.
P.O. Box 7920
Gurnee, IL 60031 USA
LEATHER
Bertucci® watches feature a quick tool-less band change. Your watch can
be fitted with multiple material types & colors.
1. Never wear your watch unless the crown (setting knob) is completely screwed down or pushed in.
5. Replace band if excessively worn, see Replacement Bands in section 7.
NYLON
Bertucci® watches use environmentally friendly mercury free batteries.
Batteries should be replaced by a professional jeweler or use the
Bertucci® Battery & Band™ replacement program listed below... which
offers an outstanding value on a new battery & band for your Bertucci®
Watch. Please visit our web site bertucciwatches.com for more
information. Do not attempt to remove the case back as it requires
special tools and skills. Proper replacement of batteries is critical to
ensure the long life of your Bertucci® Watch. Actual battery life may vary
based on environmental factors, normal battery variance, and usage
pattern.
BATTERY & BAND™ SERVICE: Send your watch
(remove the band) in to our service center
and we will perform the battery and o-ring
replacement and/or lubrication, clean and test
the watch, and send it back to you with the new
band of your choice at a special price.
11 Register Your Watch:
BATTERY & BAND
™
Consumer Service
REPAIR & REFURB
Consumer Service
See web site to register your watch.
WARRANTY
13 Thank You!
Consumer Service
Thank you for wearing a Bertucci® Performance Watch.™ You’ve made
an excellent choice. You’ll be pleased with your Bertucci® watch for years
to come. Please retain this manual for future reference.
14 Face Every Minute® In The Field With Bertucci®
We would like to hear from you, so
please send us your stories, testimonials,
adventures, or experiences you’ve had
wearing your Bertucci® Watch.
Please let us know of any questions or
comments you may have.
Send to: askenzo@mhbertucci.com
© 2017 MH BERTUCCI®, INC.
ALL RIGHTS RESERVED
PRINTED IN THE U.S.A.
rev.10
8/2017
Bertucci®, MH Bertucci®, DX3®, Durability By Design®, How Good Are You® and Face Every Minute® are registered
trademarks of MH Bertucci®, Inc. Bertucci® Performance Watches™ and Promise of Performance™ are trademarks
of MH Bertucci®, Inc.
(over)
Download PDF
Similar pages