Modernisation package CAB 920
For horizontal and vertical universal balancing machines
• Easy and ergonomic operation with
user guidance and correction
instructions
• Clear and understandable dialogue
screens on the TFT colour display with
convenient touch-screen operation
• Interactive direct entry windows – no
keyboard or mouse required
• Suitable for all common correction
procedures: drilling, milling, fitting of
weights
• The e-mode simplifies the operation on
two dialogue screens: entry of the rotor
data and results mode with correction
instructions
• Report design with incorporation of
graphic elements
Range of application
The CAB 920 is the innovative further development of the
legendary CAB measuring systems from Schenck. The focus
of the development was on the easy and reliable operation of
even the most complex processes and procedures. Avoid
faults, speed up procedures and once more significantly
improve the quality of your balancing – all this is possible
with the CAB 920.
Functions
• Efficient, fully digital measured data processing for highest
measurement accuracy
• Balancing protocol in PDF format
Speed range
100 to 5.000 rpm, optional up to 100.000 rpm
Delivery contents (Extract)
• Measure dynamic unbalance in 2 planes, the static
• Measuring unit CAB 920 with Touch Screen Display buildt
• Automatic tolerance comparison
• Vector and numeric display
• Display of polar or in equally / non-equally distributed
• Measuring module MMD for connection of vibration
unbalance and the couple unbalance
components
• Averaging of the measured values over time, rotor type
related
• Single compensation, key compensation, index balancing
• Tolerance calculation according to ISO 1940
• Definition and storing of type-related balancing procedures
for simplification of complex work sequences
• automatic self-test
into a housing for mounting on existing cabinets
pickups and reference sensor
• Front side USB interface for data export, etc.
• Cable set for actual Schenck „plug system 3“
• Adapter cable from actual Schenck „plug system 3“ to
„plug system 1“
• Technical documentation on CD-ROM with operator
manual of the measuring unit and electrical connection
plan, adapted to the existing machine (as far as possible)
For machines with belt drive:
• Optical reference sensor SR 19 for scanning reflective angle
reference marks
Schenck RoTec GmbH
Landwehrstrasse 55
D-64293 Darmstadt
Telefon (0 61 51) 32 23 11
Telefax (0 61 51) 32 23 15
http://www.schenck-rotec.de
E-Mail rotec@schenck.net
Modernisation package CAB 920
For horizontal and vertical universal balancing machines
• Cable set for reference sensor
• 3 m signal cable & 4 m control cable for connection to the
existing drive controls
Further hardware and software delivery options and prices
available on request.
Price
from EUR 14,800 up
Schenck RoTec GmbH
Landwehrstrasse 55
D-64293 Darmstadt
Telefon (0 61 51) 32 23 11
Telefax (0 61 51) 32 23 15
http://www.schenck-rotec.de
E-Mail rotec@schenck.net
Modernisation package CAB 920
For horizontal and vertical universal balancing machines
Clear vectorial and numerical display of the unbalance with coloured marking when the
tolerance is reached
The operator can even display the angle and amount of unbalance when balancing elastic
rotors in three planes
Schenck RoTec GmbH
Landwehrstrasse 55
D-64293 Darmstadt
Telefon (0 61 51) 32 23 11
Telefax (0 61 51) 32 23 15
http://www.schenck-rotec.de
E-Mail rotec@schenck.net
Modernisation package CAB 920
For horizontal and vertical universal balancing machines
Technical data at a glance
Application
Basic system
Universal for horizontal or vertical balancing machines, hard- or soft bearing
Modular and service friendly design with measurement, analysis and display units. Data processing and calculation via integrated industrial PC with Schenck Computer Aided Balancing software
* Vector and numeric display
* Measure dynamic unbalance in 2 planes, the static unbalance and the couple unbalance
* Automatic tolerance comparison
* Display of polar or in equally / non-equally distributed components
* Averaging of the measured values over time, rotor type related
* Tolerance calculation according to ISO 1940
* Balancing protocol in PDF format
* Conversion to other setup data
* Single compensation, key compensation, index balancing
* Drive control for automatic measuring cycle
* Definition and storing of type-related balancing procedures for simplification of complex work sequences
* Context-sensitive help function, automatic self-test
* Monitoring measuring signals
Display
Input
Active 15â TFT colour display with high luminosity
Context dependent assignment of function keys, touchscreen
Measuring methods
Efficient, fully digital measured data processing for highest measurement accuracy
Unbalance measuring range
1 : 2,000,000
Speed range
100 to 5,000 rpm , optional up to 100,000 rpm
Data storage
Dependent on the size of the storage medium, practically unlimited
* USB for peripherals
* Frontside USB for data export to storage media, etc.
* Network interface for data backup, ethernet
* Protocol printer
* Marking measured values, averaging over runs
* Angle indexing indicator
* Extensive balancing software e.g. for drilling, milling, setting weights
* Overlapping cycle
* Rotor specific calibration
* Alternating operation of 2 balancing machines with one measuring unit
* Measured value recording and storage during startup
* Vibration velocity measuring mode with single and double (2f) reference frequency
Schenck RoTec GmbH
Landwehrstrasse 55
D-64293 Darmstadt
Telefon (0 61 51) 32 23 11
Telefax (0 61 51) 32 23 15
http://www.schenck-rotec.de
E-Mail rotec@schenck.net
Modernisation package CAB 920
For horizontal and vertical universal balancing machines
* Bode- and Nyquist-diagram
* Additional measurement channels for runout measurement, etc.
* Statistical software
* Industry-specific solutions for
** the roller industry: Laser scanning, special report, 3-plane display, etc.
** Propshaft industry: up to 4 planes in parallel, permanent or rotor-specific calibration, compensation of reactive forces
** Aviation industry: Averaging over runs, weight distribution, nesting
Schenck RoTec GmbH
Landwehrstrasse 55
D-64293 Darmstadt
Telefon (0 61 51) 32 23 11
Telefax (0 61 51) 32 23 15
http://www.schenck-rotec.de
E-Mail rotec@schenck.net
Download PDF
Similar pages