model vg08006 - Vigo Industries

MODEL VG08006
CONTENT
PACKING LIST / TOOLS NEEDED
PANEL DIMENSIONS
FITTINGS / TECHNICAL DATA
WALL/CORNER INSTALLATION
CARE AND TROUBLE SHOOTING
WARRANTY
1
PACKING LIST
DESCRIPTION
MODEL NUMBER
- PANEL HOUSING
- HEAD SHOWER
- HAND SHOWER
- HAND SHOWER HOSE
- THERMOSTATIC CARTRIDGE
- HAND SHOWER MOUNTING BRACKET
- CORNER MOUNTING BRACKET
- SCREWS - 4 pc.
- FIXING PLUGS - 4 pc.
- FLEXIBLE HOSES 16" LONG WITH 1/ 2" FEMALE
CONNECTION FOR HOT & COLD WATER SUPPLY
- BLACK SCREEN - 2PC
- BLUE WASHERS - 2PC
- METAL WASHERS - 4PC
88061
84009
84004
88004
88011B
84027
88093
88009
84000
88005
84009
84004
84001
84044
88092
MISCELLANEOUS PARTS
- DIVERTER CARTRIDGE
- SPRAYER HOSE CONNECTOR
- THERMOSTAT COVER
- THERMOSTAT
- THERMOSTATIC CONTROL HANDLE
- THERMOSTATIC HANDLE BUTTON
- DIVERTER VALVE IN REAR
- TEMPERATURE VALVE IN REAR
- VOLUME CONTROL CARTRIDGE
- PLASTIC FRONT
- DIVERTER HANDLE
- HANDLE BUTTON
- MIRROR
- BODY JETS
- DIVERTER HANDLE BUTTON
- 2.0 GPM FLOW RESTRICTOR
- 2.5 GPM FLOW RESTRICTOR
88034
88053
84013
84012
84017
84019
88050
88051
88052
84023
84015
84024
87000
84011
84018
84045
84046
84027
88004
88061
84000
88005
88009
88093
84001
TOOLS
88092
84044
(NOT INCLUDED)
NOTE: INSTALLATION MUST
BE DONE BY A QUALIFIED,
LICENSED PLUMBER.
FREE FROM ACETIC ACID
PSI
PRESSURE GAUGE TO ASSURE
PROPER PRESSURE ( MAX 60 PSI)
SILICONE
RECOMMENDED - SHUT OFF
VALVES FOR HOT AND COLD
MODEL VG08006
2
PANEL DIMENSIONS
11 1/8"
10 1/2"
8"
47 1/4"
BRACKET LOCATION
68"
6 1/4"
26"
67 1/2"
15"
FLEXIBLE HOSES.
CONNECT TO COLD
& HOT WATER
RECOMMENDED 30-40"
FROM FINISHED FLOOR
BRACKET
10 1/2"
CORNER INSTALLATION (TOP VIEW)
NOTE: Dimension may vary up to 1/4". It is highly recommended to pull all dimensions off actual model for
installation and measuring purposes.
MODEL VG08006
THE MEASUREMENTS IN INCHES ARE ROUNDED TO THE NEAREST 1/8"
3
FITTINGS/TECHNICAL DATA
OVERHEAD SHOWER - 84009
ALUMINUM PROFILE - 88061
MIRROR - 87000
HAND SHOWER - 84004
4 WAY DIVERTER - 84015, 84018
- HEAD SHOWER
- HAND SHOWER
- JETS
- OFF FUNCTION
MOUNTING
BRACKET
SHOWER HOSE - 88004
MOUNTING
BRACKET
FLEXIBLE HOSES.
CONNECT TO
COLD & HOT
WATER - 88005
FRONT VIEW
12 1/4"
BODYSHOWER (WATER JET) - 84011
WATER HOSE
CONNECTION
9"
WATER TEMPERATURE CONTROL 84017, 84019
(SCALD GUARD LOCATED UNDER
HANDLE)
32"
WATER TEMPERATURE - 84012
BACK VIEW
WATER JET
TOP VIEW
WATER JETS
WATER JET
SIDE VIEW
DIRECTIONS
FROM
CENTER
POINT
This product meets the CEC requirements. It is up to the discretion of the
client to modify the product with the provided restricter. Doing so, will
remove the ability for the product to meet certain low flow standards.
Please talk to your local or statewide plumbing enforcement agency prior
to modifying. Vigo is not responsible for any alterations and the affects
that may come with altering the product, post sale and highly advises that
the client only install product that meets the needs of their local plumbing
code.
TECHNICAL DATA
MIN. FLOW PRESSURE 30 PSI
MAX OPERATING PRESSURE 60 PSI
OVERALL WATER PRESSURE IS 2.0 GALLONS
HEAD SHOWER 2.0 GALLONS
PER MINUTE AT 60 PSI
MODEL VG08006
THE MEASUREMENTS IN INCHES ARE ROUNDED TO THE NEAREST 1/8"
4
FLOW RATE REGULATIONS
This product meets the CEC requirements. It is up to the discretion of the client to modify the product with the provided restrictor. Doing so will remove the
ability for the product to meet certain low flow standards. Please talk to your local or statewide plumbing enforcement agency prior to modifying. Vigo is not
responsible for any alterations and the affects that may come with altering the product post sale and highly advises that the client only install the product that
meets the needs of their local plumbing code.
Flow rate with installed restrictor - 2.0 gpm
Flow rate with restrictor provided in box - 2.5 gpm
Restrictor
1
2
2.0 gpm
You will find the restrictor
here. Twist open the nut
counterclockwise to
remove the restrictor.
3
Remove the 2.0 gpm restrictor.
4
2.5 gpm
Once the 2.0 gpm restrictor is
removed, replace it with the non
CEC compliant 2.5 gpm restrictor
(provided).
MODEL VG08006
Replace the nut by twisting
it back on clockwise.
5
WALL INSTALLATION
88093
CORNER
INSTALLATION
84000
88009
88005
FLAT WALL
INSTALLATION
BRACKET COMES
MOUNTED TO BACK
OF UNIT
CORNER
INSTALLATION
Save time and frustration: if turning the volume/temperature control handle gives both hot and cold water, but the water does not mix, the hoses
may have been connected to the incorrect supplies. Please disconnect the hoses, reattach them to the correct supplies and test the unit.
MODEL VG08006
6
CORNER INSTALLATION
84001
84009
84000
84027
X2
84004
88009
88093
84001
84044
MODEL VG08006
7
Cleaning Recommendation for Vigo Products
Modern sanitary tapware, kitchen mixers and showers consist of very different materials to comply with the needs of the market with regard
to design and functionality.
To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning.
Cleaning Material for Mixers and Showers
Acids are necessary ingredients of cleaning materials for removing lime, however, please pay attention to the following points when cleaning
mixers and showers:
- Only use cleaning materials which are explicitly provided for this type of application.
- Never use cleaning materials which contain hydrochloric, formic or acetic acid, as they cause considerable damage.
- Phosphoric acid is also restricted as it can cause damage to the finish.
- Never mix any cleaning material with another.
- Never use cleaning materials or appliances that have an abrasive effect, such powdered and industrial cleansers,
scouring pads or micro fiber cloths.
Cleaning Instructions for Mixers and Showers
Please follow the instructions on your cleaning materials. In addition, pay attention to the following points:
- Clean the mixers and showers as needed and when required.
- The cleaning dosage and time the cleaner needs to take effect should be adjusted according to the product and the
cleaner should not be left longer than necessary.
- Regular cleaning can prevent calcification.
- When using spray cleaner, spray first onto a cloth or sponge-never directly spray onto the sanitary tapware as drops could
enter openings and gaps and cause damage.
- After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
Important
Residues of liquid soaps, shampoos and shower foams can also cause damage, so rinse with clean water after using. If the surface is
already damaged, the effect of cleaning materials will cause further damage.
DAMAGE CAUSED BY IMPROPER TREATMENT WILL NOT BE COVERED BY OUR GUARANTEE AND/OR WARRANTY
Trouble Shooting
Issue
Cause
Remedy
water level is too low
debris in flexible hose connection
flush the line
hand shower delivering insufficient water
build up of mildew or soap scum
soak or replace hand shower
temperature regulation not possible
(only hot or cold water at time of
installation)***
thermostatic cartridge is defective
exchange thermostatic cartridge
PSI or GPM improper
install pressure regulator
temperature regulation not possible
(only hot or cold water)
thermostatic cartridge is defective
or supply hose(s) faulty
exchange thermostatic cartridge
resecure or replace supply hose(s)
*** Vigo is not responsible for pressure related issues stemming from the home's water supply. The customer should read,
understand and/or ask a certified plumber prior to installation. If these steps are not taken the product may not work at optimum
efficiency.
TOLL FREE: (866) 591 - 7792
E-Mail:
techmail@vigoindustries.com
www.vigoindustries.com
8
SHOWER PANEL LIMITED LIFETIME WARRANTY
EFFECTIVE JANUARY 1, 2010
original owner or end-user for personal household use. For commercial uses, additional limitations apply.
VIGO warrants the structural components of the Product to be free from defects in workmanship and materials under normal use and service for the period
commencing from the initial date of purchase by the owner or end-user, contractor, or builder, from VIGO or an authorized VIGO dealer, through the lifetime of the
original owner or end-user.
VIGO warrants the mechanical components of the Product to be free from defects in workmanship and materials under normal use and service for a period of two (2)
years from the initial date of purchase by the owner or end-user, contractor, or builder, from VIGO or an authorized VIGO dealer.
Subject to the Warranty Service provision below, any product reported to the authorized dealer or to VIGO as being defective within the warranty period will be
repaired or replaced (with a product of equal value) at the option of VIGO. This warranty extends to the original owner or end-user and is not transferable to a
subsequent owner.
Neither the distributor, authorized VIGO dealer, nor any other person has been authorized to make any affirmation, representation, or warranty other than those
contained in this warranty. Any affirmation, representation, or warranty other than those contained in this warranty shall not be enforceable against VIGO or any other
person.
VIGO reserves the right to modify this warranty at any time, it being understood that such modifications will not alter the warranty conditions applicable at the time of
sale of the products in question.
Limitations
This warranty shall not apply to instances of incorrect operating procedures, breakages, or damages caused by fault through improper installation, carelessness,
abuse, misuse, misapplication, improper maintenance, or alteration of the Product, as well as chemical or natural corrosion, accident, fire, flood, an act of God, or any
other casualty. Avoid abrasive cleaners, steel wools, and harsh chemicals as these will scratch, damage, and / or dull the product and / or finish and void this
warranty. The owner/end-user of the Product covered by the present warranty is entirely responsible for its proper installation and any applicable plumbing or
electrical wiring. VIGO neither installs nor supervises the installation nor hires a contractor for this purpose; consequently, VIGO cannot be held responsible for any
default, breakage, or damages caused thereby or resulting thereof, either directly or indirectly.
The owner/end-user must provide access to the components of the Product as described in the installation guide so that VIGO can execute the warranty specified
herein. If such access is not available, all expenses to provide said access will be the responsibility of the owner/end-user.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by VIGO and all applicable rules,
regulations, and legislation pertaining to such installations.
This warranty does not apply unless the VIGO Product is installed by fully insured licensed professionals. Vigo strongly recommends that such licensed professionals
have experience in the installation of bathroom and kitchen products. Installation of certain products, including, without limitation, glass products (i.e., shower doors
and glass sinks) by an inexperienced person may result in glass breakage and, consequently, cause personal injury or death.
VIGO is not liable for personal injuries or deaths to any persons or for any direct, special, incidental, or consequential damage, loss of time, loss of profits,
inconvenience, incidental expenses, labor or material charges, or any other costs resulting from the use of the product or equipment or pertaining to the application of
the present warranty, or resulting from the removal or replacement of any product or element or part covered by this warranty.
EXCEPT AS OTHERWISE PROVIDED ABOVE, VIGO MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR COMPLIANCE WITH ANY CODE.
In any case, VIGO cannot be held liable for any amount over and above the purchase price paid for the Product by the owner/end-user, contractor, or builder.
Commercial Limitations
In addition to the above conditions and limitations, the warranty period for products installed for commercial applications or used in commercial ventures is one (1)
year from the initial date of purchase by the owner/end-user, contractor, or builder from an authorized dealer. VIGO is not responsible for loss of use or profit under
any circumstances. If the product is used as a display, the warranty period begins when the product is placed on display. This warranty gives the owner/end-user
specific legal rights. The owner/end-user may also have other rights which can vary from one state or province to another.
Warranty Service
In order to obtain service provided under this warranty during regular business hours, contact the dealer or distributor who sold the unit, or contact VIGO directly.
VIGO will provide the warranty service described above when the following conditions have been met: the failure is of the nature or type covered by the warranty; the
conclusive evidence (e.g., proof of purchase or installation) is provided to the foregoing by the user proving that the failure occurred or was discovered within the
warranty period; an authorized independent service person or company representative has been permitted to inspect the product during regular business hours within
*Certain models are pending approval.
Certification may be ended by VIGO or certification agencies without notice.
9
CONTENU
DIMENSIONS DU PANNEAU
INSTALLATION MURALE ET EN ANGLE
GARANTIE
1
LISTE DES ARTICLES
DESCRIPTION
- CORPS DU PANNEAU
- POMME DE DOUCHE
- DOUCHETTE
- TUYAU DE DOUCHETTE
- THERMOSTATIQUE CARTOUCHE
- SUPPORT DE FIXATION DE DOUCHETTE
- SUPPORT DE FIXATION EN ANGLE
- VIS - 4 pcs.
- CHEVILLES DE FIXATION - 4 pcs.
- FLEXIBLES 16'' DE LONG AVEC RACCORD
88061
84009
84004
88004
88011B
84027
88093
88009
84000
88005
84009
84004
FROIDE ET D'EAU CHAUDE
84001
84044
88092
88034
88053
84013
84012
84017
84019
88050
88051
88052
84023
84015
84024
87000
84011
84018
84045
84046
- CACHE DU THERMOSTAT
- THERMOSTAT
- BOUTON MANETTE THERMOSTATIQUE
- CARTOUCHE DU VOLUME
- AVANT EN PLASTIQUE
- MIROIR
- JETS CORPORELS
- 2.0 GPM FLUX DE RESTRICTION
- 2.5 GPM FLUX DE RESTRICTION
84027
88004
88061
84000
88005
88009
84001
88093
OUTILS
88092
84044
(NON INCLUS)
60
SILICONE
)
ET EAU FROIDE
2
DIMENSIONS DU PANNEAU
11 1/8"
10 1/2"
8"
47 1/4"
EMPLACEMENT DU SUPPORT
67 1/2"
15"
26"
FLEXIBLES.
BRANCHEZ SUR
68"
FROIDE
6 1/4"
CHAUDE ET
SUPPORT
10 1/2"
INSTALLATION EN ANGLE (VUE DE DESSUS)
3
POMME DE DOUCHE - 84009
PROFIL EN ALUMINIUM - 88061
MIROIR - 87000
POMME DE DOUCHE - 84004
POMME DE DOUCHE
DOUCHETTE
JETS
FONCTION OFF
L'EAU - 84017, 84019
32"
SUPPORT DE
FIXATION
DOUCHE CORPORELLE (JET D'EAU) 84011
TUYAU DE DOUCHETTE - 88004
SUPPORT DE
FIXATION
12 1/4"
FROIDE DU
TUYAU D'EAU
9"
-
TUYAUX SOUPLES
BRANCHEZ SUR
VUE DE FACE
VUE DE
DESSUS DU
JET D'EAU
ROTATION
DES JETS
CHAUDE ET
DANS
TOUTES LES
DIRECTIONS
DEPUIS L'AXE
CENTRAL
FROIDE - 88005
VUE
JET D'EAU
LA PRESSION TOTALE DE L'EAU EST 7.6 LITRES
4
de modifier. Vigo est pas responsable des modifications et de la touche qui peut venir avec la modification du poste de vente de produits et conseille que le
Etranglement
1
2
2.0 gpm
Vous trouverez ici le
restricteur. Twist ouvrir
Retirez le restricteur 2.0 gpm.
antihoraire pour retirer le
limiteur.
3
4
2.5 gpm
Une fois que le limiteur 2.0 gpm
CEC restricteur 2.5 gpm non
(fourni).
sens horaire.
5
INSTALLATION MURALE
88093
INSTALLATION
84000
88009
88005
INSTALLATION
SUR UN MUR
PLAT
LE SUPPORT SE
INSTALLATION
6
INSTALLATION EN ANGLE
84001
84009
84000
84027
X2
84004
88009
88093
84001
84044
7
Conseils de nettoyage des produits Vigo
Produits de nettoyage des mitigeurs et des douches
Consignes de nettoyage des mitigeurs et des douches
Important
Rincez le conduit
Rincez ou remplacez la douchette
Remplacez la cartouche thermostatique
(eau chaude ou eau froide seulement
Remplacez la cartouche thermostatique
Resserrez ou remplacez les tuyaux d'alimentation
(eau chaude ou eau froide seulement)
www.vigoindustries.com
8
VIGO INDUSTRIES, LLC ('VIGO')
utilisateur final en vue d'un usage personnel domestique. D'autres limitations s'appliquent en cas d'usage commercial.
l'entrepreneur ou le constructeur.
Limitations
blessures, voire la mort.
Limitations commerciales
Service de garantie
proposition par le client met fin aux obligations de VIGO au titre de la garantie.
9
MODELO VG08006
CONTENIDO
CONTENIDOS DEL PAQUETE/HERRAMIENTAS NECESARIAS
DIMENSIONES DEL PANEL
1
CONTENIDOS DEL PAQUETE
- CAJA DEL PANEL
- CABEZA DE DUCHA
- DUCHA DE MANO
- MANGUERA DE DUCHA DE MANO
- APOYO DE DUCHA DE MANO
- APOYO DE ESQUINA
- TORNILLOS - 4 piezas
- MANGUERAS FLEXIBLES DE 16" DE LARGO CON
88061
84009
84004
88004
84027
88093
88009
84000
88005
- MAMPARA NEGRA - 2 piezas
- ARANDELAS AZULES - 2 piezas
- ARANDELAS DE METAL - 4 piezas
-
84001
84044
88092
88011B
84009
84004
OTRAS PIEZAS
- CARTUCHO DE DERIVADOR
- CONECTOR DE MANGUERA DE ATOMIZADOR
- CUBIERTA DEL TERMOSTATO
- TERMOSTATO
- CARTUCHO DE CONTROL DEL VOLUMEN
- LLAVE DE DERIVADOR
- ESPEJO
- CHORROS PARA EL CUERPO
- 2.0 GPM LIMITADOR DE FLUJO
- 2.5 GPM LIMITADOR DE FLUJO
88034
88053
84013
84012
84017
84019
88050
88051
88052
84023
84015
84024
87000
84011
84018
84045
84046
84027
88004
88061
84000
88005
88009
88093
HERRAMIENTAS
84001
88092
84044
(NO INCLUIDO)
DEBE LLEVARLA A CABO UN
PLOMERO CALIFICADO Y
CON LICENCIA.
)
PSI
SILICONA
SE RECOMIENDA CERRAR
MODELO VG08006
2
DIMENSIONES DEL PANEL
11 1/8"
10 1/2"
47 1/4"
8"
67 1/2"
15"
26"
MANGUERAS
FLEXIBLES.
6 1/4"
68"
CALIENTE
SE RECOMIENDA
30-40" DESDE EL
SUELO ACABADO
DE ESQUINA
10 1/2"
(VISTA SUPERIOR)
especial sacar todas las dimensiones del modelo real.
MODELO VG08006
3
CABEZA DE DUCHA - 84009
PERFIL DE ALUMINIO - 88061
ESPEJO - 87000
DUCHA DE MANO - 84004
- CABEZA DE DUCHA
- DUCHA DE MANO
- CHORROS
SOPORTE
DUCHA PARA EL CUERPO
(CHORROS DE AGUA) - 84011
LA MANGUERA
9"
SOPORTE
MANGUERA DE DUCHA - 88004
12 1/4"
AGUA DE CONTROL DE
TEMPERATURA - 84017, 84019
(GUARDIA SCALD UBICADO DEBAJO
MANGO)
32"
TEMPERATURA DEL AGUA - 84012
MANGUERAS FLEXIBLES
LOS
CHORROS DE
AGUA GIRAN
VISTA FRONTAL
VISTA
SUPERIOR
DE CHORRO
DE AGUA
LAS
DIRECCIONES
CON
RESPECTO AL
PUNTO
CENTRAL
Y AGUA CALIENTE 88005
VISTA TRASERA
VISTA
LATERAL DE
CHORRO DE
AGUA
CABEZA DE DUCHA 2.0 GALONES
POR MINUTO A 60 PSI
MODELO VG08006
4
NORMAS DE CAUDAL
La velocidad de flujo con limitador instalada - 2.0 gpm
Caudal con limitador dispuesto en el cuadro - 2.5 gpm
Restrictor
1
2
2.0 gpm
Va a encontrar el restrictor
Retire el limitador de 2.0 gpm.
en sentido antihorario para
quitar el limitador.
3
4
2.5 gpm
Una vez que se elimina el limitador
de 2.0 gpm, sustituirlo por el
restrictor compatible 2,5 gpm CCA
no (siempre).
MODELO VG08006
Vuelva a colocar la tuerca
horario.
5
88093
EN ESQUINA
84000
88009
88005
EN ESQUINA
EL APOYO VIENE
MONTADO EN LA
PARTE TRASERA DE
LA UNIDAD
EN ESQUINA
correctas y probar la unidad.
MODELO VG08006
6
84001
84009
84000
84027
X2
84004
88009
88093
84001
84044
MODELO VG08006
7
Material de limpieza para mezcladores y duchas
siguientes puntos cuando limpie mezcladores y duchas:
- Nunca mezcle materiales de limpieza.
Instrucciones de limpieza para mezcladores y duchas
Importante
el nivel de agua es insuficiente
manguera flexible
enjuague la manguera
enjuague la ducha de mano o
la ducha de mano no tira suficiente agua
no es posible regular la temperatura
PSI o GMP inadecuados
no es posible regular la temperatura
reajuste o cambie las mangueras
techmail@vigoindustries.com
www.vigoindustries.com
8
VIGO INDUSTRIES, LLC ("VIGO")
toda la vida del propietario o usuario final originales.
personas.
Limitaciones
aplicables sobre dichas instalaciones.
incluidos, entre otros, productos de vidrio (es decir, puertas de duchas y lavabos de vidrio) por parte de personas sin experiencia puede provocar ruptura del vidrio y, por
ende, lesiones personales o la muerte.
por el Producto.
Limitaciones comerciales
9
Download PDF
Similar pages