mode ls bps 101\ 201\ 301 opratin g man aul bl ue prin t sol ution s

BL UE PRIN T SOL UTION S
OPRATIN G MAN AUL
MODE L S BPS 101\ 201\ 301
Read all instruction before start-up the machine
Please
save
this
instruction
manual
for
later
use
ABOUT US
Ningbo R.D.C Office Equipment Co, Ltd was established in 1988. With fast
development, R.D.C has invested and extended the second factory in the new industry
area, Yinzhou Investment and Innovation Center, in 2001.
Ningbo R.D.C Office Equipment Co, Ltd is one of the famous high-tech office
equipment company, producing digital duplicator, stencil duplicator, folding machine,
binding machine, paper shredder, paper cutter and so on. Our company was awarded
“National key high-tech enterprise” by the National Ministry of Science and
Technology.
We insist on “Quality Today, Market Share Tomorrow” as our guideline, take “Developing
print technique, promoting national industry” as our task, and successfully developed
series of digital duplicator. Digital duplicator integrates scanning, master making and
printing functions. It is of advanced technologies and high degree of difficulty, filled the
technology blankness in China, and obtained 24 items national patent. These products
obtained series of national honors like “National New Product”, “National Torch Program”,
“National Technology Innovation fund” etc. Currently our digital duplicators have 2
registered brands, “RongDa” and “Caven”, including more than 30 models.
R.D.C has an excellent management team, and strictly carries out ISO9001:2000 on
management and control. Our products are not only sold all over China, but also exported
to Japan, Korea, Singapore, Thailand, Malaysia, Brazil, South Africa, Middle East, and
other countries and districts. Fast and excellent after service ensure our customer free from
any possible after-sales trouble. Satisfaction of our customer is our best promise.
Young, brave and sapiential Rongda people would like to strive together with all friends
and promote Chinese printing technology to step forward to the world!
Address:928, ChengXin Road, YinZhou Investment & Innovation Center
Website: www.nbrdc.com
Declaration
1. This product is A-Grade, which may cause radio interference in the environment. In this
case, the user may need to take counter measure against it.
2. Any modification on the specification shall not be notified. Please kindly understand and
coutact the manufacturer if there is any question on this manual.
1
DISTRIBUTOR CERTIFICATE
16 th February 2010
To whom it may concern.
This is to confirm that Blue Solutions International has been a Global Distrobutor of
our range of Duplicators for the past 5 years. They are fully trained and certified to
market and technically support the range of products.The Blue range of Duplicators
are manufactured by R.D.C. OFFICE EQUIPMENT:
It is an exclusive brand that is only distributed by Bule Print Solutions and their
Distributions Network..
For any further information please don’t hesitate to contact the undersigned.
Yours Sincerely,
Signature:
signed by General Manager
Stamp:
Ningbo R.D.C Office Equipment Co., Ltd.
2
Contents
About Us—————————————————————————————————————1
Declaration ————————————————————————————————————1
Distributor Certificate ———————————————————————————————————2
Safety Guides———————————————————————————————————6
Machine Placement—————————————————————————————————9
Machine Cleaning—————————————————————————————————10
Notice on Printing and Printouts———————————————————————————11
Chapter 1. Before Use
Part Name and Functions——————————————————————————————13
Paper Feed Part——————————————————————————————————15
Drum Unit————————————————————————————————————16
Paper Receiving Part————————————————————————————————16
Master Disposal Box Part——————————————————————————————17
Master Making Part————————————————————————————————17
Operation Panel——————————————————————————————————18
Specified Original and Printing Paper—————————————————————————20
The Principles of Master Making and Printing——————————————————————21
Capital 2. Basic Functions of Master Making and Print
Turn on the Power—————————————————————————————————24
Placement of Printing Paper—————————————————————————————25
Open the Paper Receiving Tray———————————————————————————26
Installation of Master————————————————————————————————27
Installation of Ink—————————————————————————————————29
Placement of Original————————————————————————————————30
Choose Paper Size—————————————————————————————————32
Master Making——————————————————————————————————34
Printing—————————————————————————————————————35
Turn off the Power—————————————————————————————————36
3
Chapter 3 Printing Operation
Enlargement and Reduction—————————————————————————————38
Automatic Zoom————————————————————————————————39
Free Zoom——————————————————————————————————41
Density Adjusting————————————————————————————————42
Scanning Density Adjusting ————————————————————————————42
Master-making Density Adjusting ——————————————————————————43
Printing Density Adjusting ——————————————————————————————43
Char/Char&Photo/ Photo Mode———————————————————————————44
Two in one Master Making——————————————————————————————45
Book Mode ————————————————————————————————————47
Chapter 4 Other Functions
Counter Display Function—————————————————————————————50
Printing Speed Adjustment—————————————————————————————51
Printing Position Adjustment ————————————————————————————52
Power Save Function————————————————————————————————53
Confidential Function———————————————————————————————53
Computer Print Function———————————————————————————————54
The Instruction of Driver Installation——————————————————————————55
Chapter 5 Consumables Replacement
Ink Replacement—————————————————————————————————63
Master Replacement———————————————————————————————65
Taking out Disposal Master————————————————————————————67
Printing Paper Replacement————————————————————————————69
Chapter 6 Trouble Shooting
No Current———————————————————————————————————71
Master Making/printing Error———————————————————————————72
Display Error on LCD and Simple Solution——————————————————————73
Placement of Drum——— ————————————————————————————75
4
Paper Empty——————————————————————————————————76
Paper Jam———————————————————————————————————77
Master Ejection Error——————————————————————————————80
Master Load Error—————————————————————————————————82
Chapter 7 Specifications and Maintenance
Specifications———————————————————————————————————85
Maintenance———————————————————————————————————86
Replace the Friction Pad——————————————————————————————87
Replace the Paper Switch——————————————————————————————88
Replace /Clean the Printing Roller——————————————————————————89
Replace the Soft Screen——————————————————————————————90
5
Safety Guides(Please read this section carefully and follow it)
There are different symbols and pictures in this manual, and some labels are also attached on the
machines. These indications are for dangerous warning. The explanation is as below:
Warning: Very dangerous. It may cause serious harm by incorrect operation.
Attention: Very dangerous. It may cause hurt by careless operation.
It means forbidden.
In some case it means a indication while in some case it means forbidden.
●
These are very serious safety guides which should be followed.
Warnings:
When sundries get into inside of the machine, please do not use the machine,
otherwise it may cause fire or electric shock.
● Please first cut off power and contact the dealer.
Please do not use the machine under unusual condition like high temperature,
smoke, fog or abnormal odor; otherwise it may result in fire and electric shock.
●
Please first cut off power and contact the dealer.
6
Warnings:
Please do not repair the machine.
●
Or it may cause fire or short circuit.
Please do not teardown the machine optionally.
●
High voltage inside the machine may cause fire or short circuit.
Please do not cut off the power with waterish hand.
●
Or it will cause short circuit.
Please do not mangle, dismantle or pull the power cord.
●
Do not put heavy object on the power cord or tied the power cord.
Please do not insert or drop the metal, tinder into the machine.
●
Or it may cause fire or short circuit.
Do not put vase, cup or water container on the machine.
●
Liquid flowing into the machine may cause fire or short circuit.
Do not use power otherwise than specified voltage or connect the machine.
to more than one power source.
●
Or it may cause fire or short circuit.
Do not locate the machine in a polluted or dusty place.
●
Or it may cause fire or short circuit.
7
Cautions:
Please pull out the power cord before move the machine.
If the power cord is damaged, fire or short circuit may happen.
When take off the power plug, please do not pull the power cord.
●
Or the power cord will be damaged which may cause fire or short circuit.
Please do not place the machine on an unsteady place.
●
In case the machine is overturned, injures may be caused.
Make sure to fix the machine’s feet wheel once locate the machine.
●
In case the machine is overturned, injures may be caused.
8
Machine Placement
Put the machine on a level and steady place.
Keep the machine away from dusty place.
Don’t keep machines exposed to direct sun light or
heating equipment like stoves, otherwise the ink will be
metamorphosed, which will result in poor print quality.
Moreover, direct sun light will result in wrong display
of LCD. Also keep the machine away from too cold or
too wet circumstance.
9
Machine Cleaning
Please clean the machine according to the
following way. Clean the machine with soft
cloth, water and neutral solvent. The alcohol
and organic solvent are not allowed to clean
machines, otherwise the machine cover shall
be damaged or its color will be changed.
The machine needs cleaning at least once a
week. Make sure to cut off the power and take
off the power plug before cleaning.
When cleaning the glass table, please use soft
cloth to wipe off the dust.
Warning
● Make sure to take off the power plugs before clean, or it will cause fire
or short circuit.
● Do not make the water or cleanser flow into the machine, in case this
happens please contact the dealer, otherwise it will cause fire or short of
circuit.
10
Notice on Printing and Printouts
Caution:
There are some restriction on the presswork, please confirm whether the presswork is
legal or not.
1. Forbidden presswork.
Notes, currency, government stock and local government stock are forbidden to
print, even stamped with “Sample”.
Notes, currency and government stock which are valid abroad are forbidden to print.
Unused stamp and post card are forbidden to print without approval by the
government.
Government issued stamp and the tax paper are forbidden to print.
2. All kinds of stock, permits, bills should be printed according to the number that
government allowed. Government issued passports, public/private driving
license, permits, food ticket should be careful to print.
3. Original with printing droit.
The personal collection and the related unsaleables like books, music book, artwork,
pictures, maps, and photos are not allowed to print.
11
Chapter 1
Before Use
This chapter provides the basic information about the machines, including
the names of parts, all buttons of control panels, requirement of originals
and print paper.
Part Name and Functions———————————————————13
Paper Feed Part———————————————————————15
Drum Unit—————————————————————————16
Paper Receiving Part—————————————————————16
Disposal Master Box Part———————————————————17
Master Making Part——————————————————————17
Operation Panel———————————————————————18
Specified Original and Print Paper————————————————20
z
Specified Original—————————————————————20
z
Specified Print Paper————————————————————21
The Principles of Master Making and Printing———————————21
z Master Making —————————————————————21
z Printing ————————————————————————22
12
Part Name and Functions
Machine appearance (BPS 101)
3
1
4
2
10
5
9
8
7
Item
1
6
Part
Control panel
2
3
4
5
6
7
8
9
Functions.
Displays the machine information, and control
machine’s working process.
Original receiving tray Delivers and receives the original.
Scan cover
Original scan.
Original guiding tray Feeds and locates the original.
Paper receiving tray
Receives and loads the printouts.
Stand (optional)
Machine location.
Front door
Open the door to replace drum and install ink.
Power supply switch Turn on/off power.
Paper feed tray
Paper loading.
10
Power cord
Connect the power.
13
Machine appearance (BPS 201)
1
10
9
2
8
7
3
4
5
6
Item
1
2
3
4
5
6
7
8
9
Part
Top cover
Scan flat lock level
Power supply socket
Paper feed tray
Power supply switch
Stand (optional)
Paper receiving tray
Front door
Control panel
Functions.
Keeps good contact between the original and the scan glass.
Locks up the scan part.
Connect the power.
Paper loading.
Turn on/off power.
Machine location.
Receives and loads the paper.
Open the door to replace drum and install ink.
Displays the machine information and control working
process master plate and print.
10
Scan glass
Locates and scans the original.
14
Ⅰ
Paper Feed Part (BPS 101/BPS 201)
9
8
1、Paper feed pressure knob
2、Power supply socket
3、Paper feed roller
4、Paper detecting switch
5、Friction pad
6、Paper guide
7、Power supply socket
8、Feed tray lock lever
9、Paper guide adjusting knob
1
2
3
4
5
6
Paper Feed Part (BPS 101/BPS 201)
10、Paper feed pressure knob
11、Paper guide adjusting knob
12、Power supply socket
13、Paper guide
10
14、Paper feed roller
15、Friction pad
11
16、Paper detecting switch
17、Power supply switch
12
13
14
15
15
16
17
7
Ⅱ
22
Drum Unit
18、Drum spanner
19、Ink bracket
20、Ink case switch
21、Drum lock switch
22、Drum
23、Ink chip device (optional)
18
19
20
23
21
30
Ⅲ
Paper Receiving Part
24、Disposal master box switch
25、Printing pressure adjusting lever
26、Blower
24
27、Central guide
25
28、Paper receiving guide
29、Paper guide plate
30、Paper transport belt
26
27
28
16
29
Ⅳ
Master Disposal Box Part
32
31
31、Disposal master box cover
32、Cover switch
33、Disposal master full switch
34、Blower mouth
33
34
Ⅴ
Master Making Part
35、Master guide board
36、Cutter switch
37、Thermal head release lever
38、Master core bracket
39、Master
40、Cutter
41、Master chip device (optional)
35
40
17
36
37
38 39
41
Operation Panel
Item
Name
Function.
1
Zoom rate key
To switch between automatic zoom mode and manual free zoom mode.
2
Power save key
3
Set key
After 1 minute of pressing the key, the machine enter power save mode,
then exit by pressing any key.
To enter password set interface.
4
Photo mode key
Press it to enter photo mode interface.
5
Auto zoom key
Press it to enter zooming rate interface.
6
7
File mode key
Confirm key
Press it to enter file mode interface.
Confirm the selected item or the set parameters.
8
Number Key
Press it to input the printing number.
9
Test print key
Print one sheet of test printout, and main display is effective.
10
Master making key
Print it to start master making.
11
12
LCD screen brightness Adjust the backlight brightness of LCD.
adjust key
Paper clip’s location
Temporary location for paper clips used on the original.
13
Original size key
Press it to select original size.
14
Copy size key
Press it to adjust copy size.
15
16
17
Density key
Density key
Density convert key
Press it to adjust density of scan or master plate,increase the density.
Press it to adjust density of scan or master plate,reduce the density.
Press to convert between scan density and master plate density.
18
Print Speed key L
Press it to reduce print speed.
19
Print Speed key R
Press it to increase print speed.
18
20
Cursor keys
Change selections in the Main Display. They function when the light is on.
21
Cancel key
Cancel current settings, and back to the main interface.
22
* key
Cancel or reset the number of printing paper.
23
# key
Press it to return all settings to initial status.
24
Stop key
Press it to stop print.
25
Start key
Press it to start print. The print number is not zero and the Main display is effective.
NO.
Key press
Functions
1
2
Zoom indicator light
Setting indicator light
Indicates zoom rate including automatic rate and manual adjusting rate.
Displays code setting state.
3
Energy saving indicator light
Energy saving state.
4
LCD main screen
Machine state, print sheet number, machine setting, error information,
etc.
5
Err indicator light
To indicate error on the machine.
6
Data transfer indicator light
To indicate the state of master making.
7
8
9
To indicate original size, six models sizes for BPS 101 : B4 ,
A4,B5,A5,Legal, Letter;
Original size indicator light
six sizes for BPS 201:
A3、 B4,A4,B5,A5,Letter.
To indicate printout size, six models sizes for BPS 101 : B4 ,
A4,B5,A5,Lagal, Letter, automatic zoom rate available;
Printout size indicator light
five models sizes for BPS 201:
B4,A4,B5,A5,Letter,automatic zoom rate available.
Density conversion indicator To indicate scanning density mode or master making density mode,
light
light on for master making density, light off for scanning density.
10 Density indicator light
To indicate scan density or master making density, five grades.
11 Print speed indicator light
To indicate print speed, five levels, 55ppm, 70ppm, 85ppm, 105ppm,
120ppm.
12 Cursor keys indicator light
When this light is on, the Cursor keys are functioned.
19
◆Notes:
1. It is not allowed to press two or more keys synchronously except the special instructions.
2. At least 1 second interval should be allowed when press two keys continuously.
Specified Original/Print Paper
Specified Original
(BPS 101)
(BPS 201)
●
●
●
●
●
Document feed mode
Size: Max257mm×364mm
Book top mode
Weight: original paper or book not more than 10 kgs
Size: Max297mm×420mm
Notes:
Following types of original can not be used:
● The original with crack or file-binding holes.
● The original which has been folded or violently curled.
● The original with staples or paper clips.
● Carbon-backed documents.
● Adhesive paper.
● High transparent original.
20
Specified Print Paper
Paper sheet
40g/㎡ - 210g/㎡
Paper size
Max.297mm×420mm Min.100mm×50mm
Loading capacity
Paper feed tray 950 sheets(70g/㎡)(BPS 101/201)
Paper receive tray 1000sheets(70g/㎡)
Cautions
The following types of paper can not be used:
● The paper with crack or file-binding holes.
● The paper with clips or marked folds.
● The paper which was violently curled.
● Carbon-backed paper.
● Adhesive paper.
The Principles of Master Making and Printing
Master Making
First of all, the disposal master box collects the printed master and detectives the master collection.
Meanwhile the scanner head reads the image data from the original and transfer the data to the thermal
head. The thermal head prints the image data to the master, and the thermal master is loaded onto the
drum by mechanical part and then the test print is made.
BPS 101
21
BPS 201
Printing
The paper feed tray will support the paper up, and the paper is separated and delivered to the
second feed roller by cooperation work of paper feed roller and the paper separator pad. Then the paper
is delivered to the clearance between drum and pressure roller. After ink distribution procedures, the ink
is seeped from the tiny mesh of the thermal master on the drum, and through pressing by the pressure
roller to the paper and to the drum, the printing procedure is completed. Shortly the paper is separated
from the master by the blower device, and then by paper separate pawl and the paper transport belt the
print paper is delivered to the paper receiving tray.
22
Chapter 2
Basic Functions of Master Making and Print
This chapter states basic procedure of master making and printing in
standard mode.
1. Turn on the Power ————————————————————24
2. Placement of Printing Paper—————————————————25
3. Open the Paper Receiving Tray————————————————26
4. Installation of Master————————————————————27
5. Installation of Ink—————————————————————29
6. Placement of Original———————————————————30
7. Choose Paper Size—————————————————————32
8. Master Making——————————————————————34
9. Printing—————————————————————————35
10. Turn off the Power————————————————————36
23
Basic Functions of Master Making and Print
1. Turn on the Power
1. Connect power cord;
BPS 101/201
2. Turn the power switch to“Ⅰ”position;
BPS 101/201
LCD screen displays “ Ready”, and the machine stays in standard mode:
The settings of standard mode is as listed below.
· Printing number
:0
· Zoom rate :100%
· Photo mode
:Char&Photo
· P Position :0mm
· Paper Size :B4
· File mode :Single
· Density :Middle
· Speed :Middle
24
2. Placement of Printing Paper
1.Open the paper feed tray;
BPS 101/201
2.Place the paper sheets, and locate the paper guide;
BPS 101/201
Notes:
The load capacity of BPS 101/201 is 950 sheets ( 70g/ ㎡ )
3. Set feed pressure according to the thickness of paper sheets.
BPS 101/201
25
3. Open the Paper Receiving Tray
1. Open the paper receiving tray;
2. Open the paper receiving guide;
3. Open the central guide;
26
4. Adjust the paper receiving guide and central guide
according to the paper size;
5. Adjust the paper guide plate according to the print
image size.
4. Installation of Master
1. Open the original receive tray (BPS 101);
Press the scan lock lever, and push the scan flat(BPS 201)
27
2. Press down the thermal head release lever to “Open”
position;
Notes
Do not touch the thermal head,,
otherwise it shall be scraped, which
shall effect master making quality.
3. Put the new master roll onto the master bracket;
4. Three ways of installation:
WayⅠ Feed the master head (with mill finish adown)
between the printing roller and the thermal head, and push
the release lever to position “Close”. Close the scan table
and then master making can be started.
Way Ⅱ Put the thermal head release lever to “Close”
position, master mill finish adown, put the master under
the print roller and thermal head, keep pressing the cutter
micro switch, the master feed forward automatically, when
the distance is 5-10mm to the cutter, then use right hand to
press thermal head release lever, with left hand pull the
master to the feed entrance, close the scan table and then
master making can be started.
Way Ⅲ Put the thermal head release lever onto the
“Open” position, put the master head between the print
roller and the thermal head, feed the master forward until
10mm to the cutter blade, pull the master straight, and
release the thermal head release lever to “Close” position.
Press the cutter micro switch and cut the extra master.
Take out the cut master piece. Close the scan table and then
master making can be started.
28
◆Warning!
The process of cutting master includes process of cutter
returning to its start point. Don’t take out the master head piece
until the whole cutting procedure is completed. It’s dangerous,
please be careful.
Close the scan flat (BPS 201)
5. Close the original receiving tray(BPS 101 )
5. Installation of the Ink
1. Open the front door, press down the ink case switch;
2. Open the ink cover, make sure the ink mouth
groove connect to”U” mouth of the drum. Correct
installation;
29
3. Lock the ink holder tightened, or else the air will be
leaked in and the ink can not be well pumped in. The
work between the ink cartridge and the ink pump
nozzle can be adjusted by the adjusting bolt;
Notes
Do not keep the opening ink in the air
long time
4. Close the front door.
6. Placement of the Original
1. Open the original support tray(BPS 101);
30
Open the scan cover(BPS 201)
2. Place the original on the original tray, with image side adown.(BPS 101 );
Notes:
Zoom function is available for B5 and A5 size orginal when they are
placed in both vertical and horizontal direction. A3 and B4 original is
normally functioned only in vertical palcement.
Vertical placement
Horizontal placement
Put the original in the middle and close to the left glass flat (The image side adown)(BPS 201)
Note:
Zoom function is available for A4,A5 and B5 size orginal when they are placed in
both vertical and horizontal direction. A3 and B4 original is normally functioned
only in vertical palcement
31
Vertical placement
Horizontal placement
7. Choose Paper Size
Choose original size and copy size, eg. choose original size A4 and copy size A4, operation details as
below:
1. Check and make sure automatic zoom rate indicator light is on, if it isn’t on, press the zoom rate key
for conversion
32
2.Press the “original size” key to select A4, and the A4 indicator light is on.Press the “copy size” key to
select A4 and the indicator light A4 is on;
3. LCD display:
◆Notes:
Europe
Paper size
A(±1%)×B(±1%)
A3
291mm 414mm
A4(R)
204mm 291mm
A4
291mm 204mm
B4
251mm 358mm
A5(R)
204mm 142mm
A5
142mm 204mm
B5
251mm 176mm
B5(R)
176mm 251mm
● When use the paper smaller than original size without choosing paper size,
the inside of machine and the printout might be polluted.
● If the paper size is not correctly set before making master, the printout will
not be correct.
33
8. Master Making
1. Press the master-making key and start master making;
试印
Test
print
制版
Master-making
印刷
Start
停止
Stop
2. After master making, one sheet of test printout automatically follows;
3. Check whether the print image is in the center of the printout, if not, please check if the original and
the print paper are located in center.
◆Notes:
If print number is input before master making, after master making, the machine will directly print
according to the input number without test printout.
34
9. Printing
1.Set the printing number by pressing numeric key;
数据传输
故障
Dada transmission
Error
1
2
3
4
5
6
7
8
9
0
Reset
复位
Clear
清除
◆Notes
● Max printing number set 9999 sheets.
● If wrong number is input, press “*” key and set a new number.
2. Press the start key and start to print. The set print number decreases. The printouts are delivered onto
the receiving tray;
Test试印
print
Master-making
制版
Start
印刷
停止
Stop
3. The machine stops automatically after printing work is completed, and then the initial set printing
number will be displayed.
◆Notes
● Press “stop” key if you need stop printing when the number is not zero, and press start key when
you need restart printing.
35
10. Turn off the power
1.Turn the switch to“O”position and turn off the power.
BPS 101/201
36
Chapter 3
Printing Operation
This chapter introduces how to operate the machine on all functions.
Enlargement and Reduction———————————————————38
Automatic Zoom———————————————————————39
Free Zoom——————————————————————————41
Density Adjusting———————————————————————42
Scanning Density Adjusting ———————————————————42
Master-making Density Adjusting —————————————————43
Printing Density Adjusting————————————————————43
Char/Char&Photo/ Photo Mode——————————————————44
Two in one Master Making————————————————————45
Book Mode——————————————————————————47
37
Enlargement and Reduction
To set enlargement and reduction according to the sizes required.
■Automatic Zoom Rate(Page 41)
Machine choose the zoom rate automatically according to
the size of original and copies.
B4
document
A4
■Free Zoom Rate (Page40)
Document
printout
printout
38
Automatic Zoom
Basic Print Process 1-6 step(Page 24-33)
Incorrect
Incorrect
Correct
1. Set “Automatic zoom rate” light on. If “Free zoom” light is on, press conversion button to switch the
“Automatic zoom” light on;
2. Select original size by pressing “Original document size ” button. For example:A4. Press ”Copy
size” to select. For example:B5;
BPS 101
BPS 201
39
3. LCD screen display:
◆Indication:
Make sure to return the settings back to standard zoom rate
● According the steps 1-2 above select “B4” for original documents size and “B4” for copy size.
● Press “Reset” key (All clear) back to original setting mode.
Press “Master-Making” key to start making master.
40
Free Room
1.Press the zoom switch button and the “Free Zoom” indicator light is on. Press “Original document
size” button to select original paper size. E.g. :A4.
BPS 101
BPS 201
2.Press “Free zoom” button to enter free zoom interface.
就绪
-
0
0
+
图文
100%
单页
图像模式
手动倍率
文件模式
100
50%
-
3.Press cursor button “-” and “+” to set adjustment from 50% to 200%.
4. Press “Confirm ” button to confirm.
110
50%
-
41
%
200%
+
%
200%
+
5.LCD Screen:
◆Back to Zoom Standard Mode:
● Press zoom switch button or reset button.
Press “Master-making” key to start master making.
Density Adjusting
Scan Density Adjusting
Adjust the scan density in 5 levels. There are 5 indicator lights, lighter, light, normal,
dark, and darker. Increase density if original document is too light, while decrease the
density if the original is too dark.
◆Choose “density” before master making.
Such as :Set the density to light.
Press density adjusting buttons (including density-light button and density-dark button) as below in the
operation panel to adjust the density. Press density-light button when you want to set light scan density.
Note:When the left light is on, it is master-making density adjusting.
◆Indication
Back to scan density standard setting.
Press density adjusting buttons until the middle light is on.
42
Master-making Density Adjusting
5 steps for master making density, lighter, light, normal, dark, darker, which are indicated by 5 density
light.
1. Press density switch button (the middle button) as below, then the signal light will be on.
2.Press density adjusting buttons to select the printing density.
3.Back to select the scanning density after press density switch button, then the indicator light of
density switch is off.
◆Back to scanning density in standard settings.
● Adjust according to step1---2 until the middle signal light is on.
Printing Density Adjusting
3 levels for printing density.
Adjust the printing density by increasing or decreasing the pressure of the pressure roller.
Turn it to high level, the printing density is dark.
Turn it to low level, the printing density is light.
43
Char/Char&Photo/ Photo mode
3 modes for this function:
●Char mode:for text print.
Original: Text original
●Photo mode:for photo print.
Original: Photo original
●Char&photo:for print of original mixed with text and photo.
Original: Original mixed with text and photo
◆Note
Select photo modes before master making.
For example, when the original is letter file, please choose “char” from the Photo Mode.
1. Press “Photo Mode” button in the display.
就绪
-
0
+
878
图文
100%
单页
图像模式
自动倍率
文件模式
2.The screen displays “Photo mode”, and the indicator light of cursor keys is on. Press cursor keys
Up and Down keys to enter “Char” Mode. Press confirm key.
44
3.Main screen display:
Press “Master-making” button to make master.
Two-in-one Master Making
Under Two-in-one master making mode, 2 sheets of original can be plated into one sheet of master,
which is for book making.
1
2
3
4
2
Documents(even number)
1
2
3
4
5
Documents(odd number)
1
4
Printout1
2
1
Printout2
4
Printout1
3
Printout2
45
3
5
Printout3
◆Notes
● Select “Two-in-one”mode before master making.
● If 100% zoom rate is selected, set the original size equals to combined size of 2
sheets of original.
● Under zoom rate other than 100%, please pay attention on the following points.
● Make sure after zooming, the combined size of the 2 sheets of original is same as
the copy paper size.
● Only standard size paper is ensured the correct printout, You can not get the right
output except the standard paper size.
1.Press “File Mode” button to enter file mode;
就绪
0
-
878
+
图文
100%
单页
图像模式
自动倍率
文件模式
2. LCD screen displays “File mode” interface;
BPS 101
BPS 201
单页
二合一
文件模式
文件模式
单页
二合一
书刊
3. The indicator light of cursor keys is on, press Up Down buttons to choose “Two-in-one”mode or book
mode ,then press “confirm ” button to confirm.
46
Back to standard mode settings:
● Press “File Mode”, choose “Single”, and press” Confirm” button. Or
Press “#”(All clear) button, back to the standard mode settings.
Press “Master-making” button to start master making.
◆Indications
If the printout is incorrect, please check below:
● The direction of original document.
● Original size ,paper size and zoom rate.
Book Mode(BPS 201)
Book mode
Under book mode, the book shadow or the shadow of folded original can be erased
automatically.
Middle shadow erase
The middle shadow with width of 15mm is erased.
47
1.Press “File Mode” button;
就绪
-
0
+
878
图文
100%
单页
图像模式
自动倍率
文件模式
2.LCD displays “File mode”;
3. Press cursor keys “Up” and “Down” to enter “Book” mode. Press “Confirm” to enter adjustment of
book middle shadow. Press cursor keys “+” “-” to adjust the book middle show as showed below.
Press “Confirm” button to confirm.
◆Indications
Back to standard mode setting:
Press “File Mode” to “Single” and press “Confirm” key. Or
Press “#” (All clear) button, back to the standard settings.
Press “Master-making” button to start making master.
48
Chapter 4
Other Functions
This chapter describes other functions, such as : total count display, printing
speed, printing position adjustment, energy save, password, computer
connecting and other functions.
Counter Display Function———————————————————50
Printing Speed Adjustment———————————————————51
Printing Position Adjustment——————————————————52
Power Save Function—————————————————————53
Confidential Function—————————————————————53
Computer Print Function————————————————————54
The Instruction of Driver Installation———————————————55
49
Counter Display Function
1. Check and confirm the machine stops printing;
◆Notes
If the machine is printing, please press “Stop” button to stop printing.
2. Keep press “Stop” button, the total count of printing and master making will be displayed. See
following figure: Total count: 123, Total master making: 10. Loose “Stop ” button, and the machine is
back to original mode.
50
Printing Speed Adjustment
5 levels of printing speed,55 ppm, 70 ppm, 85 ppm, 105 ppm, 120 ppm, the 5 indicating lights indicate
5 levels of printing speed. Default setting is 85ppm, which is indicated by the middle light. The indicate
light being on indicates the ongoing print speed.
◆Indications:
● In case the continual jam happen on certain type of paper or certain image paper,
please increase or reduce the printing speed to solve this problem.
● Under high speed printing, printout is light ,while under low speed, printout is dark.
● The printing speed adjustment is effectual during printing process.
Reduce the speed:
Press “SpeedL”button, indicator light is moving toward left, and the printing speed decreases.
Increase the speed
Press” SpeedR” button, indicator light is moving toward right ,the speed
increases.
◆Indications:
Two methods are used to set back to standard settings:
● Press “SpeedL” button or “SpeedR” button until the middle indicator light is on.
● Press “#” (All clear ) button to back to the standard mode.
51
Printing Position Adjustment
Printing position is still adjustable after master making. (Horizontal±10mm )
◆Indications:
The printing position is not adjustable during the printing process.
Printing Position Adjustment
1. Press “+”and “-”keys indicated by the arrow as showed in the picture.
就绪
-
10
0
+
图文
100%
单页
图像模式
自动倍率
文件模式
上
-
+
下
◆Indications:
Two ways of setting to turning back to the standard position:
● Press “+” “-” keys until the printing position is “0mm”.
● Press “reset” button.
52
Power Save Function
1. After press “Energy save” button, LCD will become black without any display. All of the indicator
are off (Except save energy indicator light );
2. Press any button to exit from save energy mode.
Confidential Function
1. Press “Set” button and the indicator light of setting button is on. LCD displays “Input
New Password”;
2. Press the numeric keys to input 4 digit password, for example “1234”, then press “confirm ” button.
The screen displays “Input password”, and please input the password “1234”. Press “Confirm” button
and the main display shows “Ready”.
Remark:If the user wants to change the password, press “set” button, input new password and then
press “Confirm” button. Without any operation, the machine will automatically lock in three (3) minutes.
The machine shall save the password as memory after the password is set, so the password must be
input every time the machine is turned on. If the user wants to cancel the password setting, first turn off
the machine, then press “Energy save” button and “Set” button synchronously, and switch on the power.
In this way, the password is canceled. If the user wants to set a new password please follow the steps
above.
53
Computer Print Function
◆Note:
Please refer to the instruction of driver installation for cable connecting and setting.
Steps 1—7, the basic print process (Pages 24---33)
1. Plug the USB cable into the digital duplicator and the
computer;
2. Connect the USB cable;
3. Operate the print command according to the computer operation system.
◆Indications:
After master making and print are completed, more operations can be executed on the control panel.
54
The Instruction of Driver Installation
Please install the driven procedures according to the following steps:
Step 1: Plug the USB cable into the printer and the computer. Then Turn on the printer.
Step 2: The following dialog box appears:
Then click Next.
Step 3: The following dialog box appears:
55
Check the second option. Then click Next.
Step 4: The screen now displays Hardware Type. Select Printer, then click Next:
Step 5: The following dialog box appears:
56
Click Have Disk.
Step 6: The following dialog box appears:
Click Browse.
Step 7: Browse the path of the driver. The screen displays like following:
Select the file RDPrinter1.1 .inf, then click Open.
57
Step 8: The following dialog box appears:
Click OK.
Step 9: The screen displays the Printer Name:
Select the proper printer, and then click Next.
Step 10: The following dialog box may appears:
58
Click Yes to continue installing the driver.
Step 11: The following dialog box appears:
Click Next.
Step 12: The following dialog box may appears:
59
Click Yes to continue the installation.
Step 13: The following dialog box appears:
Click Finish to complete the driver installation.
60
The installation instruction above takes Windows XP as an example. The installations are similar in
other operation system, and please just follow.
Notes: The driver procedure above applies to BPS 101,BPS 201,BPS 301 etc.
In case the installation fails please enter the printers in the control board, cancel RDPrinter1.1, click
right key of the Mouse on the blank and enter the server attributes, click driver procedure and cancel
RDPrinter1.1. And then reinstall according to the steps above.
Remarks: This driver procedure is normally operated under Windows2000 and WindowsXP.
61
Chapter 5
Consumables Replacement
This chapter describes how to replenish supplies and dispose of them regularly.
Ink Replacement———————————————————————63
Master Replacement——————————————————————65
Taking out Disposal Master———————————————————67
Printing Paper Replacement———————————————————69
62
Ink Replacement
LCD displays“Ink over”, when the ink in the cartridge is used out. Please replace ink as follows.
◆Notes
Only Blue ink is applied to this machine.
1. Open front cover;
2. Press down the drum lock switch;
3. Take out the empty ink case;
63
4. Open the new ink cover, insert
the groove of the ink nozzle to be the
“U”mouth on the drum;
◆Notes
Don’t keep the opening ink exposed in the air for long.
5. Support and push in the ink holder, and
lock it tightly. (The air is not allowed to
leak into the ink pump, otherwise the ink
can not be pumped in well).
6. Close the front cover.
64
Master Replacement
When the master roll is near to the end, LCD displays “Master on Error” or“Master over”,
Please replace the master as follows.
◆Notes
Only Blue master is applied to this machine.
1. Open the original paper receiving tray .(for BPS 101 );
Press down the scan lock lever, and push the scan flat (
. for BPS 201)
65
2. Press down thermal head releasing
lever to “Open” position;
◆Notes
Don’t touch the thermal head,
otherwise the thermal head might
be scraped, which will effect
master making quality.
3. Rotate the master roll bracket, remove
the old master roll. Take out remaining
master jammed in the thermal head;
4. Please install the new master roll onto
the master bracket , and put it onto the
plating machine;
5. The smooth face of master should be
put downwards, extend the head of
master in the middle of the printing roller
and thermal head, lift down thermal head
releasing lever to “Close”;
66
6. Press cutter micro switch ,take out the
wasted master piece under cutter;
◆Notes
It’s back and forth in cutting.
Please do not touch paper cutting
to avoid danger.
7.Close the original paper receiving tray (for BPS 101 ) and scanning flat(for BPS 201 ).
◆Notes
●Don’t take out warning sticker on the cutter cover.
●Moving cutter may cause hurt.
Taking out Disposal Master
LCD shows “Disposal box full”.
◆Notes
Only Blue waste master core is applied to this machine.
1. Press the master disposal box switch,
open the disposal master box up to max;
67
2. Press the cover switch and the cover
will be automatically sprung up;
3. Grasp both ends of roll core to take it
out and remove the disposal master from
roll core;
◆Notes
There is ink on the roll core ,
please take care of your clothing.
4. Put the roll core into disposal master box;
5. Close disposal maser box top cover ,
and close that box.
68
Print Paper Replacement (for BPS 101/BPS 201)
1. If the machine is in printing state please stop printing by pressing “Stop” button;
2. Press down paper feeding tray switch,
lift down the feeding paper tray;
3. Take out paper;
◆Notes
Please take it out if paper is jamming on the feeding
Roller.
4. Replace print paper, feeding paper tray lifts up automatically after press “Start” key.
69
Chapter 6
Trouble Shooting
This chapter describes how to take care of problems that may arise with your
Rongda machines. Check the following information and the related items
before calling your authorized service department.
No Currency —————————————————————————72
Master Making/Printing Error———————————————————73
LCD Display Error and Simple Solution———————————————74
Placement of Drum———————————————————————76
Paper Empty —————————————————————————77
Paper Jam———————————————————————————78
Master Ejection Error —————————————————————81
Master Load Error———————————————————————83
70
No Currency
If there is no power, please check as follows:
Whether the machine is switched on
Whether the machine is connceted to the power source
No
Yes
Connect to
the
power
source
Whether the power is switched on
No
Yes
Switch
on
the power
Contact the
Service Dept
71
Master Making/Printing Error
If the machine can not proceed with master making/printing, please check as follows:
Whether there is indication from the indicator light
No
Contact the Service Dept.
Yes
Refer to the indicated error information of the
next interface
72
LCD Display Error and Simple Solution
Information
Solution
Drum Lock
Clamp Error
Turn off the power and restart it. If the drum is still locked ,please contact Service
Dept.
Contact the Service Dept.
Clamp A Error
Contact the Service Dept.
Clamp B Error
Contact the Service Dept.
Clamp C Error
Contact the Service Dept.
Unload Position Contact the Service Dept.
Error
Space Motor Error Contact the Service Dept.
Cutter Motor Error Contact the Service Dept.
Fan Motor Error
Contact the Service Dept.
Master-off Motor Check disposal master box feeding mouth jams or not, if not, contact Service Dept.
Error
Power Safeguard Turn off the power and turn it on in 10 seconds. If it doesn’t function, please contact
the Service Dept.
Ink Motor Error
Contact the Service Dept.
Contact the Service Dept.
Elevator Motor
Error
( for BPS 101/201)
Ink Over
Please replace with new ink in time.
Load paper
Place paper(BPS 101/BPS 201).
Disposal box full
Please close the box. Or the box might be full, please remove the wasted master.
No Drum
Please relocate the drum.
Front Cover Open Please close front cover.
73
Top Cover Open (for BPS 201 )
Close the front cover.
Scan Cover Open (for BPS 101 )
Close scan cover.
File Jam (for BPS 101 )
Open Scan cover, take out the original paper.
No File (for BPS 101 )
In 2 second this error shall be removed automatically removed.
Right Paper Jam
Press down the drum start switch to check paper
exit or close the master disposal box.
Left Paper Jam
Press the jog switch of paper feed tray and remove the jam paper.
(for BPS 101/BPS 201)
Middle Paper Jam
Master on Error
Press down the jog switch and take out the jam paper.
Open paper receiving tray, and clear the master(for BPS 101)/Open
scan table, and clear the master(for BPS 201)
Sundries in Feed Part
Open paper load tray, and clear it (for BPS 101); Open scan
table, and clear it (for BPS 201).
Master over
Outs Error
Install the new master.
Press drum micro switch and drive the drum to stop position, and
take out drum. Take out the remaining master from drum if
there is any.
Fake Ink
Please replace with original ink, and press “stop ”key to clear the
error.
Fake Master
Please replace with original master, and press “stop”key to clear
the error.
Ink Connect Error
Press “stop” key to clear the error, and print again. If the error
remains, contact Service Dept.
Master Connect Error
Press “stop” key to clear the error, and print make master again. If
the error remains, contact Service Dept.
74
Placement of Drum
Clear errors as follows:
1. Open front cover;
2. Open drum lock switch ,take out drum;
3. Insert it again ,then press the lock switch;
4. Close front cover.
75
Paper Empty (for BPS 101/BPS 201)
Please add paper as below:
1. Place the paper onto the feed tray when feed tray elevator
stops descending;
2. Press “Start” key to stat printing , paper feed tray elevator
lifts automatically.
76
Paper Jam
Left Paper Jam
Please take out paper as below:
1. Press elevator switch and the elevator descends( BPS 101/BPS 201);
2. Take out jammed paper on the paper feed roller;
3. Press “Start” key to print , paper feed tray lifts automatically.(BPS 101/BPS 201).
Right Paper Jam
Please take out jam paper as below:
1. Press disposal master box switch, open that box
to max;
77
2. Press drum switch and take out paper jammed;
3. In case the print paper wraps onto the drum, please
press the micro switch of the drum to rotate the drum
until the head of the print paper is showed;
◆Warning:
● Please don’t touch the drum and
pressure roller when press microswitch.
● Don’t put your hand into machine
while the machine is running, avoiding
hurting.
4. Please take out that paper as press that drum
switch,remove that err;
◆Notes:
Don’t make your cloth dirty
5. Press drum switch continuously till the warning
stops. It shows drum is back to stop position;
6. Close disposal master box.
◆Notes:
In order to make quality printout, after cleaning
the warpping paper from the drum,please remake
the master.
78
Middle Paper Jam
Please take out paper as below:
1. Press disposal master box switch, and open that box to
max;
2. Press drum micro switch and take out paper jammed;
3. Keep pressing drum microswith until warning stops, which indicates drum is back to stop position;
4. Close master disposal box.
79
Master Ejection Error
Please clear error as below.
◆Warning:
● Don’t press the drum surface by hands, otherwise your hands and clothing may get
stained, moreover the drum surface may get damaged and the printout quality might be
affected.
● Be careful to locate the drum, and make sure to place it onto the level and steady flat.
1. Press drum micro switch until warning stops;
2. Open front cover;
3. Open drum locked switch ,take out the drum;
80
4. Open the clamp and release the clamp edge;
◆Notes:
Don’t make your cloth dirty
5. Clear the master manually, rotate drum to its
stop position, and make sure the block in the
groove;
6. Hold the drum flatly, insert it into the machine,
and press down the drum lock switch;
7. Close front cover;
8. Press master-making key, start again.
81
Master Load Error (for BPS 101)
Please clear error as below:
1. Open original paper receive tray;
2. Clear extra master;
3. Close original paper receive tray;
4. Press master-making key ,and make master again.
82
Master Load Error (BPS 201)
Please clear error as below:
1. Press scan lock lever, and push scan table;
2. Clear extra master;
3. Close scan table;
4. Press master-making key ,and make master again.
83
Chapter 7
Specifications and Maintenance
Specifications———————————————————————86
Maintenance ———————————————————————87
Replace the Friction Pad ——————————————————88
Replace the Paper Switch——————————————————89
Replace/Clean the Paper Printing Roller————————————90
Replace the Soft Screen —————————————————91
84
Specifications
No. Name
1
2
3
4
5
6
7
8
Digital Duplicator
Model
BPS 101(B4)
BPS 201 (B4)
Working principle
Fully automatic digital scanning, thermal master making and printing
Processing mode
Thermal master making
Time of first print
44S
50S
Resolution
300×400DPI
Scanning Area
252mm×355mm
285mm×406mm
Original size(MAX)257mm×364mm(B4)
297mm×420mm(A3)
Image area(MAX) 252×355mm
9 Paper size (MAX) 297mm×420mm(A3)
10 Paper weight
40g/㎡-210g/㎡
11 Feed tray capacity
950sheets70g/ ㎡
950sheets70g/ ㎡
(MAX)
12 Print speed
55-120ppm(5 selections:55、70、85、105、120)
13 Regular Zoom Rate 70%、81%、87%、94%、100%(standard)、115%、122%、141%
Selection
14 Zoom Rate Selection Automatic Zoom, Free zooming:50%—200% at 1%
15 Print
position ±10mm
adjustment
16 Original Mode
Text , picture , text & picture
17 Density control
Lighter, light, normal, dark, darker
18
19
20
21
Ink supply
Master load
Master drop
Master size
22 Machine size
Automatical
Automatical
Automatical
270mm*495mm
Pack size
747mm*707mm*
747mm
Work size
1320mm*625mm*
510mm
Pack size
747mm*720mm*
847mm
Work size
1320mm*625mm*
560mm
85
Maintenance
In the first paper feed section, the pressure between the paper rollers and the separator transports the
paper to second feed part. Therefore, after a number of sheets pass, the feed rollers will be worn so it
needs to be replaced.
1. Press the elevator’s microswitch and
the paper feed tray descends. Remove the
bolt on the connect knot on the right end
of the paper rollers’ shaft;
2. Move the paper rollers’ shaft until the
paper roller can be removed;
3. First remove the side rollers; take off
the screw on the main roller and then
remove the main roller. Replace with new
feed rollers and fix the screw;
4. Connect the paper roller shaft and the
connecting bolt. Make sure to fix screws.
86
Replace Friction Pad
The paper sheets are separated by the pressure produced by the friction pad against the paper roller. The
friction pad will be worn after a number of sheets are fed, and it need to be replaced.
1. Press the elevator’s microswitch and
the paper feed tray descends. Remove the
bolt on the connect knot on the right end
of the paper rollers’ shaft;
2. Move the paper rollers and the shaft,
take out the old friction pad and install a
new one;
3. The clearance between the paper
separation base unit and the paper feed
support plate can be adjusted by the
adjusting bolt.
Adjustment standard. Make no clearance between
the base unit and support plate, but the support
plate can be taken out from the base unit or taken
into it by hand easily.
e
e
4. Connect the paper roller shaft to the connecting bolt. Make sure to fix the screws.
87
Replace the Paper Switch
Paper switch controls the up-down movement of print roller. It is pushed open by the paper head.
It shall be worn after a number of paper printed and needs to be replaced.
1. Take out the drum, open the disposal
box and the white paper switch is
showed;
2. Disassemble the bolt on the paper
switch, and remove the paper switch;
3. Install the new paper switch, keep two
ends of switch to be parallel to the paper
plate below;
4. Close disposal box and place the drum back.
88
Replace/ Clean the Printing Roller
During paper is printed, the press between drum and print roller produce the pressure. Moreover, some
dust or speck comes in. In order to make sure printing is not effected, the print roller should be cleaned
or replaced when the print paper sheets reach a certain amount.
1. Open the front door, take out drum,
and you will see the print roller inside;
2. Take hold of the print roller and draw it away;
3. Clean the printing roller or replace
with a new roller.
Put one end of new print roller’s shaft
into the hole controlled by spring plate,
and then insert the other end into the hole.
Put drum back and close the front door.
89
Replace the Soft Screen
1. Place drum steadily on the desktop or
floor. Discharge two press plates on the
upper frame of screen;
2. Remove lower frame of screen;
3.Take out the soft screen from the drum,
and then remove upper and lower frames
of soft screen. Insert new screen from the
front side;
4.Install new screen in reverse of the
steps of above.
Notes: The installed soft screen must be
leveled off and tightened.
90
Download PDF
Similar pages