User manual Refrigerator ZBB28651SA

EN
User manual
Refrigerator
ZBB28651SA
Contents
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _
2
4
5
5
5
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Noises _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13
Subject to change without notice.
Safety instructions
In the interest of your safety and to ensure the
correct use, before installing and first using
the appliance, read this user manual carefully,
including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation
and safety features. Save these instructions
and make sure that they remain with the appliance if it is moved or sold, so that everyone
using it through its life will be properly informed on appliance use and safety.
For the safety of life and property keep the
precautions of these user's instructions as the
manufacturer is not responsible for damages
caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
• Keep all packaging well away from children.
There is risk of suffocation.
• If you are discarding the appliance pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you can)
and remove the door to prevent playing children to suffer electric shock or to close
themselves into it.
• If this appliance featuring magnetic door
seals is to replace an older appliance having
a spring lock (latch) on the door or lid, be
2
sure to make that spring lock unusable before you discard the old appliance. This will
prevent it from becoming a death trap for a
child.
General safety
Warning!
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• The appliance is intended for keeping foodstuff and/or beverages in a normal household and similar applications such as:
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
• Do not use a mechanical device or any artificial means to speed up the thawing process.
• Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances, unless they are approved for
this purpose by the manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.
www.zanussi.com
During transportation and installation of the
appliance, be certain that none of the components of the refrigerant circuit become
damaged.
If the refrigerant circuit should become
damaged:
– avoid open flames and sources of ignition
– thoroughly ventilate the room in which the
appliance is situated
• It is dangerous to alter the specifications or
modify this product in any way. Any damage
to the cord may cause a short-circuit, fire
and/or electric shock.
Warning! Any electrical component
(power cord, plug, compressor) must be
replaced by a certified service agent or qualified service personnel to avoid hazard.
1.
2.
•
•
•
•
Power cord must not be lengthened.
Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged
power plug may overheat and cause a
fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not
insert the power plug. There is a risk of
electric shock or fire.
6. You must not operate the appliance
without the lamp cover (if foreseen) of
interior lighting.
This appliance is heavy. Care should be taken when moving it.
Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet, as this could cause skin abrasions or frost/freezer burns.
Avoid prolonged exposure of the appliance
to direct sunlight.
Bulb lamps (if foreseen) used in this appliance are special purpose lamps selected for
household appliances use only. They are not
suitable for household room illumination.
www.zanussi.com
Daily use
• Do not put hot pot on the plastic parts in the
appliance.
• Do not store flammable gas and liquid in the
appliance, because they may explode.
• Appliance's manufacturers storage recommendations should be strictly adhered to.
Refer to relevant instructions.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the mains plug from
the mains socket.
• Do not clean the appliance with metal objects.
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean
the drain. If the drain is blocked, water will
collect in the bottom of the appliance.
Installation
Important! For electrical connection carefully
follow the instructions given in specific
paragraphs.
• Unpack the appliance and check if there are
damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it.
In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the
oil to flow back in the compressor.
• Adequate air circulation should be around
the appliance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation.
• Wherever possible the back of the product
should be against a wall to avoid touching
or catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close to
radiators or cookers.
• Make sure that the mains plug is accessible
after the installation of the appliance.
• Connect to potable water supply only (If a
water connection is foreseen).
3
Service
• Any electrical work required to do the servicing of the appliance should be carried out
by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine spare
parts must be used.
Environment Protection
either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The
insulation foam contains flammable gases: the
appliance shall be disposed according to the
applicable regulations to obtain from your local
authorities. Avoid damaging the cooling unit,
especially at the rear near the heat exchanger.
The materials used on this appliance marked
are recyclable.
by the symbol
This appliance does not contain gasses
which could damage the ozone layer, in
Control panel
1
2
4
3
1 Temperature indicator LED
2 Quick Freeze indicator
3 Quick Freeze button
4 Temperature regulator
ON/OFF button
Switching on
Insert the plug into the wall socket.
Touch the temperature regulator button if all
LED are off.
Switching off
Keep touching the temperature regulator button for 3 Sec.
All indicators light off.
Temperature regulation
To operate the appliance, proceed as follows:
• touch the temperature regulator button until
the LED corresponding to the required tem-
4
perature lights up. Selection is progressive,
varying from 2 to 8°C.
At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set temperature is moved to 1 position right. Corresponding LED will blink for a while.
Touch the setting button until the required
temperature is selected. The set will be fixed
coldest setting: +2°C
warmest setting: +8°C
A medium setting is generally the most suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside
the appliance depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
Quick Freeze function
You can activate the Quick Freeze function by
pressing the Quick Freeze button.
The LED corresponding to the symbol Quick
Freeze indicator lights up.
You can deactivate the Quick Freeze function
by pressing the Quick Freeze button again.
The Quick Freeze indicator will light off.
Important!
This function stops automatically after 52
hours.
www.zanussi.com
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brandnew product, then dry thoroughly.
Important! Do not use detergents or abrasive
powders, as these will damage the finish.
Daily use
Movable shelves
1
The walls of the refrigerator are equipped with a series of
runners so that the
shelves can be positioned as desired.
Positioning the door shelves
To store various size food packages, the door
shelves can be placed at different heights.
Gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
2
3
Cold accumulators
The freezer contains at least one cold accumulator which increases storage time in the
event of a power cut or breakdown.
Helpful hints and tips
Hints for energy saving
• Do not open the door frequently or leave it
open longer than absolutely necessary.
• If the ambient temperature is high and the
Temperature Regulator is set to low temperature and the appliance is fully loaded, the
compressor may run continuously, causing
frost or ice on the evaporator. If this happens, set the Temperature Regulator toward
warmer settings to allow automatic defrosting and so a saving in electricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liquids in the refrigerator
• do cover or wrap the food, particularly if it
has a strong flavour
www.zanussi.com
• position food so that air can circulate freely
around it
Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags and
place on the glass shelf above the vegetable
drawer.
For safety, store in this way only one or two
days at the most.
Cooked foods, cold dishes, etc.: these should
be covered and may be placed on any shelf.
Fruits and vegetables: these should be thoroughly cleaned and placed in the special
drawer(s) provided. When in contact, lemon
juice can discolor the plastic parts of your
fridge. It is therefore recommended to keep
citruses in separate containers.
Butter and cheese: these should be placed in
special airtight containers or wrapped in alumi5
nium foil or polythene bags to exclude as
much air as possible.
Bottles: these should have a cap and should
be stored in the bottle rack on the door.
Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.
Care and cleaning
Caution! Unplug the appliance before
carrying out any maintenance operation.
This appliance contains hydrocarbons in
its cooling unit; maintenance and recharging must therefore only be carried out by
authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free from
debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any
pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as this will
damage the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a
brush. This operation will improve the performance of the appliance and save electricity consumption.
Important! Take care of not to damage the
cooling system.
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage the
plastics used in this appliance. For this reason
it is recommended that the outer casing of this
appliance is only cleaned with warm water
with a little washing-up liquid added.
After cleaning, reconnect the equipment to the
mains supply.
Defrosting of the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment ev6
ery time the motor compressor stops, during
normal use. The defrost water drains out
through a trough into a special container at the
back of the appliance, over the motor compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator compartment channel to prevent the water
overflowing and dripping onto the food inside.
Use the special cleaner provided, which you
will find already inserted into the drain hole.
Defrosting of the freezer
The freezer compartment of this model, on the
other hand, is a "no frost" type. This means
that there is no buildup of frost when it is in
operation, neither on the internal walls nor on
the foods.
The absence of frost is due to the continuous
circulation of cold air inside the compartment,
driven by an automatically controlled fan.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
• disconnect the appliance from electricity supply
• remove all food
• defrost (if foreseen) and clean the appliance
and all accessories
• leave the door/doors ajar to prevent unpleasant smells.
www.zanussi.com
If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food inside from spoiling in case of a power failure.
What to do if…
Warning! Before troubleshooting,
disconnect the mains plug from the mains
socket.
Only a qualified electrician or competent
person must do the troubleshooting that is not
in this manual.
Problem
The appliance does not
operate. The lamp does
not operate.
The lamp does not work.
The compressor operates
continually.
Important! There are some sounds during
normal use (compressor, refrigerant
circulation).
Possible cause
Solution
The appliance is switched off.
Switch on the appliance.
The mains plug is not connected
to the mains socket correctly.
Connect the mains plug to the
mains socket correctly.
The appliance has no power.
There is no voltage in the mains
socket.
Connect a different electrical appliance to the mains socket.
Contact a qualified electrician.
The lamp is in stand-by.
Close and open the door.
The lamp is defective.
Refer to "Replacing the lamp".
The temperature is not set correctly.
Set a higher temperature.
The door is not closed correctly.
Refer to "Closing the door".
The door has been opened too frequently.
Do not keep the door open longer
than necessary.
The product temperature is too
high.
Let the product temperature decrease to room temperature before
storage.
The room temperature is too high.
Decrease the room temperature.
Water flows on the rear
plate of the refrigerator.
During the automatic defrosting
process, frost defrosts on the rear
plate.
This is correct.
Water flows into the refrigerator.
The water outlet is clogged.
Clean the water outlet.
Products prevent that water flows
into the water collector.
Make sure that products do not
touch the rear plate.
Water flows on the
ground.
The melting water outlet does not
flow in the evaporative tray above
the compressor.
Attach the melting water outlet to
the evaporative tray.
The temperature in the appliance is too low.
The temperature regulator is not
set correctly.
Set a higher temperature.
www.zanussi.com
7
Problem
The temperature in the appliance is too high.
Possible cause
Solution
The temperature regulator is not
set correctly.
Replacing the lamp
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Service Center.
2.
3.
Set a lower temperature.
If necessary, adjust the door. Refer to "Installation".
If necessary, replace the defective door
gaskets. Contact the Service Center.
Closing the door
1. Clean the door gaskets.
Installation
Caution! Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
A
B
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the climate class indicated on the rating plate of the
appliance:
Climate
class
D
Ambient temperature
E
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Electrical Connection
Caution! Any electrical work required to
install this appliance should be carried
out by a qualified electrician or competent
person.
Warning! This appliance must be
earthed.
The manufacturer declines any liability should
these safety measures not be observed.
8
C
Important! The wires in the mains lead are
coloured in accordance with the following
code:
A Green and Yellow:
Earth
C Brown:
Live
D Blue:
Neutral
As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1. Connect the wire coloured green and yellow to the terminal marked either with the
www.zanussi.com
2.
3.
4.
5.
letter “E“ or by the earth symbol
or coloured green and yellow.
Connect the wire coloured blue to the terminal either marked with the letter “N“ or
coloured black.
Connect the wire coloured brown to the
terminal either marked with the “L“ or coloured red.
Check that no cut, or stray strands of wire
is present and the cord clamp E is secure
over the outer sheath.
Make sure the electricity supply voltage is
the same as that indicated on the appliance rating plate.
• Loosen the upper
pin and remove the
spacer.
• Remove the upper
pin and the upper
door.
• Loosen the middle
hinge.
6. Switch on the appliance.
The appliance is supplied with a 13 amp plug
fitted B. In the event of having to change the
fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
Warning! A cut off plug inserted into a
13 amp socket is a serious safety (shock)
hazard. Ensure that it is disposed of safely.
Door reversibility
The door of the appliance opens to the right. If
you want to open the door to the left, do these
steps before you install the appliance:
• Remove the lower
door.
• Loosen the lower
pin.
On the opposite side:
• Install the lower pin.
• Install the lower
door.
• Tighten the middle
hinge.
• Install the upper
door.
• Tighten the spacer
and tighten the upper pin.
Ventilation requirements
The airflow behind
the appliance must
be sufficient.
5 cm
min. 200cm2
min.
200cm2
Installing the appliance
Caution! Make sure that the mains cable
can move freely.
Do the following steps:
www.zanussi.com
9
x
2
I
x
1
4mm
44mm
I
1 If necessary cut
the adhesive sealing
strip and then apply
it to the appliance as
shown in figure.
2 Install the appliance in the niche.
Push the appliance in
the direction of the
arrows (1) until the
upper gap cover
stops against the
kitchen furniture.
Push the appliance in
the direction of the
arrows (2) against
the cupboard on the
opposite side of the
hinge.
4 Attach the appli3 Adjust the appliance to the niche
ance in the niche.
with 4 screws.
Make sure that the
distance between
the appliance and
the cupboard frontedge is 44 mm.
The lower hinge cover (in the accessories
bag) makes sure that
the distance between the appliance
and the kitchen furniture is correct.
Make sure that the
clearance between
the appliance and
the cupboard is 4
mm.
Open the door. Put
the lower hinge cover
in position.
C
D
E
E
B
5 Remove the correct part from the
hinge cover (E).
Make sure to remove
the part DX, in the
case of right hinge,
SX in opposite case.
10
6 Attach the covers
(C, D) to the lugs
and the hinge holes.
Install the vent grille
(B).
Attach the hinge covers (E) to the hinge.
www.zanussi.com
GH
Ha
Hb
8 mm
8 mm
K Ha
Hb
Hc
Hd
Ha
7 Connect the appliance laterally to
the kitchen furniture
sidewall:
1. Loosen the
screws of the
part (G) and
move the part
(G) till the furniture sidewall.
2. Tighten the
screws of the
part (G) again.
3. Attach the part
(H) to the part
(G).
8 Disconnect the
parts (Ha), (Hb), (Hc)
and (Hd).
Hb
Ha
21 mm
90
o
21 mm
Hc
9 Install the part
(Ha) on the inner
side of the kitchen
furniture.
12 Remove the
brackets and mark a
distance of 8 mm
from the outer edge
of the door where the
nail must be fitted
(K).
Hb
~50 mm
90o
~50 mm
11 Open the appliance door and the
kitchen furniture door
at an angle of 90°.
Insert the small
square (Hb) into
guide (Ha).
Put together the appliance door and the
furniture door and
mark the holes.
10 Push the part
(Hc) on the part (Ha).
13 Place the small
square on the guide
again and fix it with
the screws supplied.
Align the kitchen furniture door and the
appliance door by
adjusting the part
(Hb).
Hd
14 Press the part
(Hd) on the part
(Hb).
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly to the cabinet.
Important! If the ambient temperature is low
(for example, in the Winter), the size of the
gasket decreases. The size of the gasket
increases when the ambient temperature
increases.
www.zanussi.com
11
Noises
There are some sounds during normal running
(compressor, refrigerant circulation).
SSS
RRR
!
HISSS!
OK
U
BL
SSSRRR!
HISSS!
12
SSSRRR!
HISSS!
BB
IC
CL
K!
BRRR!
!
CLICK!
BRRR!
CR
AC
K!
CLICK!
BRRR!
www.zanussi.com
BLUBB!
BLUBB!
CRACK!
CRACK!
Technical data
Dimension of the recess
Height
1780 mm
Width
560 mm
Depth
550 mm
Rising Time
22 h
Voltage
230-240 V
Frequency
50 Hz
The technical information are situated in the
rating plate on the internal left side of the appliance and in the energy label.
www.zanussi.com
13
14
www.zanussi.com
www.zanussi.com
15
222369509-A-412013
www.zanussi.com/shop
Download PDF
Similar pages