(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
OWNER’S MANUAL
English
260
GS
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
Saltwater System with
E.C.O. (Electrocatalytic
Oxidation)
Model ECO 7220G/8220G 220 – 230 V~
Model ECO 7230G/8230G 230 – 240 V~
For illustrative purposes only.
Don’t forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance,
which may result in updates to the instruction manual without
notice.
©2014 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle
Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/
Gedruckt in China. ®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans
certains pays sous licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen
verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex
Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA
90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/
Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
260-GSA-R0-1509
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
TABLE OF CONTENTS
Warnings.......................................................................................... 3
Parts References............................................................................. 4
Product Information & Specifications...........................................5
Setup Instructions...........................................................................6-10
Salt & Pool Water Volumes.............................................................11
Intex Pools Salt Table..................................................................... 12
Intex Pools Cyanuric Acid Table....................................................13
Intex Pools Operating Time Table..................................................14
Non-Intex Pools Salt Table.............................................................15
Non-Intex Pools Cyanuric Acid Table............................................15
Non-Intex Pools Operating Time Table..........................................15
Operating Instructions....................................................................16-18
LED Code Chart.............................................................................. 19
Stationary Mounting....................................................................... 20
Maintenance.................................................................................... 21-23
Long Term Storage......................................................................... 23
Pool Maintenance and Chemical Definitions............................... 24
Troubleshooting Guide................................................................... 25-26
General Aquatic Safety................................................................... 27
Limited Warranty............................................................................. 28
SAVE THESE INSTRUCTIONS
Page 2
260
GS
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
IMPORTANT SAFETY RULES
Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.
READ AND FOLLOW ALL INSTRUCTIONS
WARNING
• To reduce the risk of injury, do not permit children to use this product. Always
supervise children and those with disabilities.
• Children must stay away from this product and electrical cord(s).
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Assembly and disassembly by adults only.
• The pump must be supplied through a residual current device(RCD) having a rated
residual operating current not exceeding 30mA.
• Always unplug this product from the electrical outlet before removing, cleaning,
servicing or making any adjustment to the product.
• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn
mowers, hedge trimmers and other equipment.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarity qualified person in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension cords, timers, plug
adaptors or converter plugs to connect unit to electric supply; provide a properly located outlet.
• Do not attempt to plug in or unplug this product while standing in water or when your
hands are wet.
• Keep this transformer more than 3.5m away from the pool.
• Keep the plug of this product more than 4m away from the pool and at a height of
1.2m at least.
• Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool.
• The pump must not be used when people are in the water.
• This product is for use with storable pools only. Do not use with permanently installed pools. A storable pool is constructed so that it may be readily disassembled for storage and reassembled to its original configuration.
• This product is intended to be used only for the purposes described in the manual!
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE,
ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.
These product warnings, instructions and safety rules provided with the product
represent some common risks of water recreation devices and do not cover all
instances of risk and danger. Please use common sense and good judgement when
enjoying any water activity.
For portable Above-Ground-Pools only
SAVE THESE INSTRUCTIONS
Page 3
260
GS
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
PARTS REFERENCE
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
8
1
12
5
6
7
11
2
15
3
10
14
16
4
9
13
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
REF. NO.
PARTS FOR CONNECTION
COMMON
TO FILTER PUMPS WITH
PARTS
1-1/4” (32MM) HOSE SIZE
1
2
­­­­­­SPARE PART NO.
DESCRIPTION
QTY.
ADAPTOR A WITH THREADED COLLAR (OPTIONAL)
1
10849
10849
SCREW
ECO7220G/ ECO8220G/
7230G
8230G
2
11519
11519
3
ELECTROLYTIC CELL HOUSING
1
11898
11903
4
E.C.O. ELECTRODE
1
11900
11905
5
TITANIUM ELECTRODE
1
11899
11904
6
FLOW SENSOR
CONNECTOR HOSE WITH THREADED FITTINGS
1
11460
11460
1
1
10720
10720
10722
10722
2
1
11131
11131
ELECTROLYTIC CELL NUT
11582
11432
11
L-SHAPE O-RING
2
11228
11228
12
TITANIUM ELECTRODE O-RING
1
11585
11515
13
CONTROL STATION
1
11902GS
11908GS
14
TEST STRIPS
1
19635
19635
15
TITANIUM ELECTRODE O-RING
1
11585
11585
16
ELECTROLYTIC CELL NUT
1
11582
11582
7
8
9
10
THREADED ADAPTOR B (OPTIONAL)
CELL COVER
When ordering parts, be sure to quote the model number and part numbers.
SAVE THESE INSTRUCTIONS
Page 4
260
GS
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
HOW THE CHLORINE IS GENERATED
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride. During the
installation of your Saltwater System, a measured quantity of salt is dissolved in the pool water
to make it slightly salty. The pool water flows through the Saltwater System ’s electrolytic cell to
produce chlorine. The chlorine dissolves in the water and instantly starts destroying bacteria and
algae. It also oxidizes all other organic materials.
HOW THE ELECTROCATALYTIC OXIDATION WORKS
The Electrocatalytic Oxidation (E.C.O.) is an Advanced Oxidation Processes (AOPs). When
direct current is applied to the electrocatalytic oxidation electrodes, water will be discharged to
generate “hydroxyl radicals”. The hydroxyl radical is a powerful oxidant, which oxidizes organic
contaminants, and destroys bacteria and algae. Hydroxyl radicals in combination with free
available chlorine provide the strongest and safest pool water sanitation.
PRODUCT SPECIFICATIONS
Model:
Wattage:
Ideal Salt Level:
E.C.O. Cell Output Current:
Maximum Chlorine Output/hour:
Filter pump minimum flow rate:
Limited Warranty:
Electrolytic Cell
ECO7220G/7230G
65 W
3000 ppm (parts per million)
500 mA
5 grams/hour
700 ~ 3000 gallons/hour
(2650 - 11355 liters/hour)
see “Limited Warranty”
ECO8220G/8230G
125 W
3000 ppm (parts per million)
800 mA
12 grams/hour
700 ~ 3000 gallons/hour
(2650 - 11355 liters/hour)
Flow Sensor
E.C.O.
Electrodes
Power Supply
Electronic
Control Station
SAVE THESE INSTRUCTIONS
Page 5
260
GS
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
SETUP INSTRUCTIONS
IMPORTANT
• The Saltwater System requires a separate filter pump [700~3000 gph (2650~
11355 lph)] to drive the water and function properly.
• The Saltwater System must be installed as the last piece of pool equipment in the
water return line to the pool as displayed in Drawing #1. This location extends the
life of the titanium plates.
1. Assemble the above-ground-pool (AGP) and its filter pump according to their installation
instructions.
2. Take the Saltwater System and its accessories out of the packaging.
3. Place the Saltwater System in line after the filter pump.
4. Connect the connector hose (7) to the Saltwater System inlet.
Connecting the system to pump and pool with 1-1/4” (32mm) connections/hoses:
The saltwater system features 1-1/2” (38mm) connections. It is accordingly supplied with
adaptors A (1) and B (8) for connecting to the small 1-1/4” (32mm) diameter connections/
hoses. Install as follows:
Drawing #1
WATER TO
POOL
WATER FROM
POOL
SWIMMING POOL
FILTER
PUMP
ID 1-1/4” (32mm)
HOSE
ID 1-1/4”
(32mm) HOSE
8
3.5m
8
7
1
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
SAVE THESE INSTRUCTIONS
Page 6
260
GS
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
SETUP INSTRUCTIONS (continued)
1. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water,
unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs
into the connectors, before installing the saltwater pool system.
2. Connect the adaptor A (1) to the electrolytic cell (3) outlet as shown in Drawing #1. Tighten
securely.
3
1
3. Disconnect the water return hose from the filter pump connection and connect it to the
adaptor A (1) on the Saltwater System with a hose clamp. (see Drawing #1)
4. Connect adaptor B (8) to the connector hose (7). Tighten securely. (see Drawing #1)
8
7
5. Connect adaptor B (8) to filter pump outlet (lower connection). Tighten securely.
8
7
Filter
Pump
6. Remove the black hat-like plugs that prevent water from flowing out of the pool. Now, return
the strainer grids to the strainer connectors.
SAVE THESE INSTRUCTIONS
Page 7
260
GS
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
SETUP INSTRUCTIONS (continued)
Connecting the system to pump and pool with 1-1/2” (38mm) connections/hoses:
Pump and pool with 1-1/2” (38mm) connections do not require the adaptors A (1) or B (8).
Install as follows:
Drawing #2
PLUNGER
VALVE
SWIMMING POOL
WATER FROM
POOL
WATER TO
POOL
FILTER
PUMP
3.5m
ID 1-1/2” (38mm)
HOSE
7
ID 1-1/2” (38mm)
HOSE
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
1.
2.
3.
4.
Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water,
close the plunger valves before installing the Saltwater System.
Disconnect the water return hose from the filter pump connection and connect it to the
Saltwater System outlet.
Connect the connector hose (7) to the filter pump outlet connection.
Open the plunger valves to allow the water to flow.
SAVE THESE INSTRUCTIONS
Page 8
260
GS
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
SETUP INSTRUCTIONS (continued)
Connecting the system to other types of pump (with different type of thread or no
thread):
The Saltwater System can also be adapted to other filter pumps with different thread or those
without a thread on the connection.
Connection to 1-1/4” (32mm) hose:
8
7
FILTER
PUMP
ID 1-1/4” (32mm)
CONNECTION
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
1. Connect one end of adaptor B (8) to the connector hose (7). Tighten securely.
2. Now, connect the other end of adaptor B (8) to the filter pump outlet. Tighten securely.
Connection to 1-1/2” (38mm) hose with clamp:
7
LARGE HOSE CLAMP
FILTER
PUMP
ID 1-1/2” (38mm)
CONNECTION
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
1. Connect the connector hose (7) to the filter pump outlet connection with a large hose clamp.
Tighten securely.
SAVE THESE INSTRUCTIONS
Page 9
260
GS
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
SETUP INSTRUCTIONS (continued)
Connecting the system to other types of pool
After you have connected the Saltwater System to the pump, connect it to the pool. This
is depicted in Drawings #1 and #2.
Following are the common connection types:
Connection to 1-1/4” (32mm) connectors:
HOSE CLAMP
ID 1-1/4” (32mm)
HOSE
1
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
1. Connect the adaptor A (1) to the electrolytic cell (3) outlet. Tighten securely.
2. The adapter A (1) is now fitted to the Saltwater System. The following step is to connect the
water return hose to the adaptor A (1) with a hose clamp.
Connection to 1-1/2” (38mm) connectors without thread:
LARGE HOSE CLAMP
ID 1-1/2” (38mm)
HOSE
1
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
1. Connect the adaptor A (1) to the electrolytic cell (3) outlet. Tighten securely.
2. With the adaptor A (1) fixed to the Saltwater System, connect the water return hose to the
adaptor, using a large hose clamp.
SAVE THESE INSTRUCTIONS
Page 10
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
SALT & POOL WATER VOLUMES
• Which kind of salt to use:
Use only Sodium Chloride Salts
Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also acceptable to use
water conditioning salt pellets (the compressed forms of evaporated salt). However, it will take
a longer time for them to dissolve. Do not use iodized or yellow (yellow prussiate of soda)
colored salt. Salt is added to the pool water and the electrolytic cell uses the salt to create
chlorine. The purer the salt the better the performance of the electrolytic cell.
• Optimum Salt Levels
The ideal salt level in the pool water is between 2500-3500 ppm (parts per million). The optimal
level is 3000 ppm.
A too low salt level will reduce the efficiency of the Saltwater System and result in low chlorine
production. A high salt level may generate a salty taste to the pool water (this may occur at a
salt level above 3500-4000ppm). Too high a salt level may damage the power supply and cause
corrosion to the pool metal fixtures and accessories. The Salt Table page of this manual, shows
the correct dosage of salt needed. The salt in the pool is constantly recycled. The loss of salt is
due only to pool water being physically removed from the pool. Salt is not lost due to
evaporation.
• Adding Salt
1.
2.
3.
4.
5.
6.
7.
Switch the filter pump on to start the water circulation.
Keep the Saltwater System turned off.
Determine the amount of salt to be added (see “Salt Table”).
Evenly spread the proper amount of salt around the inside perimeter of the pool.
Avoid clogging the filter. Do not add salt through the skimmer.
Brush the pool bottom to speed up the dissolving process. Do not allow salt to pile up on the
bottom of the pool. Run the filter pump 24 consecutive hours to thoroughly dissolve the salt.
After 24 hours and if all the salt is dissolved, turn on the Saltwater System,
press
button until you hear a “beep”, code “00” flashing and set the saltwater
pool system to desired operating time (see “Operating Time Table”).
• Removing Salt
If too much salt has been added, the unit will beep and display “Code 92” (see “Alarm Codes”).
You will need to lower the salt concentration. The only way to do so, is to partially drain the pool
and refill it with fresh water. Drain and refill approximately 20% of the pool’s water until the “Code
92” disappears.
• Pool Volume Calculation
Types of Pool
Gallons
(pool size in feet)
Cubic Meters
(pool size in meters)
Rectangular
Length x Width x Average Depth x 7.5
Circular
Length x Width x Average Depth x 5.9
Length x Width x Average Depth x 0.79
Oval
Length x Width x Average Depth x 6.0
Length x Width x Average Depth x 0.80
Length x Width x Average Depth
SAVE THESE INSTRUCTIONS
Page 11
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
INTEX POOLS SALT TABLE
This table shows the amount of salt needed to achieve and maintain the optimal 3000 ppm
salt level.
Pool Size
Water Capacity (Calculated at Salt Needed for
90% for Frame Pool and 80%
Startup
for Easy Set & Oval Pool)
3.0g/L (3000ppm)
Salt Needed when
Low Salt Detected
(CODE “91”)
(Gals)
(Liters)
(Lbs)
(Kgs)
(Lbs)
(Kgs)
INTEX ABOVE GROUND POOLS (AGP’s)
15' x 33" (457cm x 84cm)
2587
9792
65
30
20
10
15' x 36" (457cm x 91cm)
2822
10681
65
30
20
10
15' x 42" (457cm x 107cm)
3284
12430
80
35
20
10
15' x 48" (457cm x 122cm)
3736
14141
95
45
2510
16' x 42" (488cm x 107cm)
3754
14209
95
45
25
10
16' x 48" (488cm x 122cm)
4273
16173
110
50
30
15
16' x 52" (488cm x 132cm)
4614
17464
115
50
30
15
18’ x 42” (549cm x 107cm)
4786
18115
120
55
30
15
18’ x 48” (549cm x 122cm)
5455
20647
135
60
35
15
15' x 36" (457cm x 91cm)
3282
12422
80
35
20
10
15' x 42" (457cm x 107cm)
3861
14614
100
45
25
10
15' x 48" (457cm x 122cm)
4440
16805
110
50
30
15
16' x 48" (488cm x 122cm)
5061
19156
125
55
35
15
18' x 48" (549cm x 122cm)
6423
24311
160
75
40
20
21' x 52" (640cm x 132cm)
9533
36082
240
110
60
30
24' x 52" (732cm x 132cm)
12481
47241
310
140
80
35
16' x 48" (488cm x 122cm)
5061
19156
125
55
35
15
18’ x 48” (549cm x 122cm)
6423
24311
160
75
40
20
18' x 52" (549cm x 132cm)
6981
26423
175
80
45
20
20’ x 48” (610cm x 122cm)
7947 30079 210 90 50 25
22’ x 52” (671cm x 132cm)
10472 39637 260 120 65 30
24’ x 52” (732cm x 132cm)
12481 47241 310 140 80 35
26’ x 52” (792cm x 132cm)
14667 55515 365 165 90 40
15’8” x 49” (478cm x 124cm)
4440 16805 110 50 30 15
16'8" x 49" (508cm x 124cm)
5061 19156 125 55 35 15
18'8" x 53" (569cm x 135cm)
6981 26423 175 80 45 20
OVAL FRAME 18' x 10' x 42" (549cm x 305cm x 107cm) POOL
20' x 12' x 48" (610cm x 366cm x 122cm) 2885 10920 70 30 20 10
4393 16628 110 50 30 15
15’ x 9’ x 48” (457cm x 274cm x 122cm) 3484 13187 90 40 25 10
18' x 9' x 52" (549cm x 274cm x 132cm) RECT. ULTRA
20’ x 10’ x 52” (610cm x 305cm x 132cm) FRAME POOL
24' x 12' x 52" (732cm x 366cm x 132cm) 4545 17203 115 50 30 15
5835 22085 145 65 40 20
8403 31805 210 95 55 25
32' x 16' x 52" (975cm x 488cm x 132cm) 14364 54368 360 165 90 40
EASY SET®
POOL
CIRCULAR
METAL
FRAME POOL
ULTRA
FRAME®
POOL
SEQUOIA
SPIRIT®
POOL SET
SAVE THESE INSTRUCTIONS
Page 12
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
INTEX POOLS CYANURIC ACID TABLE
Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. To
maintain the pool water clear and clean, and to maximize the performance of the device, add
cyanuric acid to the pool. We recommend that the cyanuric acid level be maintained at
approximately 1% of the salt, i.e. 100 Lbs (45 Kgs) salt x1% = 1 Lbs (0.45 Kgs) cyanuric acid.
If the pool water is dirty, filthy or grimy, DO NOT add chlorine stabilizer (cyanuric acid) as this
will slowdown the sanitation time of the device. Under this condition you must BOOST your
pool water, refer to BOOST cycle steps. Once the pool water has been restored to clear and
clean conditions you may add cyanuric acid.
Pool Size
INTEX ABOVE GROUND POOLS (AGP’s)
15’ x 33” (457cm x 84cm)
15’ x 36” (457cm x 91cm)
15’ x 42” (457cm x 107cm)
15’ x 48” (457cm x 122cm)
EASY SET®
16’ x 42” (488cm x 107cm)
POOL
16’ x 48” (488cm x 122cm)
16’ x 52” (488cm x 132cm)
18’ x 42” (549cm x 107cm)
18’ x 48” (549cm x 122cm)
15’ x 36” (457cm x 91cm)
15’ x 42” (457cm x 107cm)
15’ x 48” (457cm x 122cm)
CIRCULAR
16’ x 48” (488cm x 122cm)
METAL
FRAME POOL
18’ x 48” (549cm x 122cm)
21’ x 52” (640cm x 132cm)
24’ x 52” (732cm x 132cm)
16’ x 48” (488cm x 122cm)
18’ x 48” (549cm x 122cm)
18’ x 52” (549cm x 132cm)
ULTRA
20’ x 48” (610cm x 122cm)
FRAME®
POOL
22’ x 52” (671cm x 132cm)
24’ x 52” (732cm x 132cm)
26’ x 52” (792cm x 132cm)
15’8” x 49” (478cm x 124cm)
SEQUOIA
16’8” x 49” (508cm x 124cm)
SPIRIT®
POOL SET
18’8” x 53” (569cm x 135cm)
OVAL FRAME 18’ x 10’ x 42” (549cm x 305cm x 107cm)
POOL
20’ x 12’ x 48” (610cm x 366cm x 122cm)
15’ x 9’ x 48” (457cm x 274cm x 122cm)
18’ x 9’ x 52” (549cm x 274cm x 132cm)
RECT. ULTRA
20’ x 10’ x 52” (610cm x 305cm x 132cm)
FRAME POOL
24’ x 12’ x 52” (732cm x 366cm x 132cm)
32’ x 16’ x 52” (975cm x 488cm x 132cm)
Water Capacity (Calculated at
90% for Frame Pool and 80%
for Easy Set & Oval Pool)
Cyanuric Acid Needed for
Startup
0.03g/L (30ppm)
(Gals)
(Liters)
(Lbs)
(Kgs)
2587
2822
3284
3736
3754
4273
4614
4786
5455
3282
3861
4440
5061
6423
9533
12481
5061
6423
6981
7947
10472
12481
14667
4440
5061
6981
2885
4393
3484
4545
5835
8403
14364
9792
10681
12430
14141
14209
16173
17464
18115
20647
12422
14614
16805
19156
24311
36082
47241
19156
24311
26423
30079
39637
47241
55515
16805
19156
26423
10920
16628
13187
17203
22085
31805
54368
0.6
0.7
0.8
0.9
0.9
1.1
1.2
1.2
1.4
0.8
1.0
1.1
1.3
1.6
2.4
3.1
1.3
1.6
1.7
2.0
2.6
3.1
3.7
1.1
1.3
1.7
0.7
1.1
0.9
1.1
1.5
2.1
3.6
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.6
0.4
0.4
0.5
0.6
0.7
1.1
1.4
0.6
0.7
0.8
0.9
1.2
1.4
1.7
0.5
0.6
0.8
0.3
0.5
0.4
0.5
0.7
1.0
1.6
SAVE THESE INSTRUCTIONS
Page 13
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
INTEX POOLS OPERATING TIME TABLE (WITH CYANURIC ACID)
Pool Size
Water Capacity (Calculated at Operating Time (hours) Intex Filter
90% for Frame Pool and 80% at different ambient/air
pump
temperatures
for Easy Set & Oval Pool)
Operating
Time
10 - 19°C 20 - 28°C 29 - 36°C
(Gals)
(Liters)
(50 - 66°F) (68 - 82°F) (84 - 97°F) (hours)
MODEL: ECO7220G/7230G
EASY SET®
POOL
CIRCULAR
METAL
FRAME POOL
ULTRA
FRAME®
POOL
15’ x 33” (457cm x 84cm)
2587
9792
3
3
4
6
15’ x 36” (457cm x 91cm)
2822
10681
3
4
5
6
15’ x 42” (457cm x 107cm)
3284
12430
3
4
5
6
15’ x 48” (457cm x 122cm)
3736
14141
4
5
6
8
16’ x 42” (488cm x 107cm)
3754
14209
4
5
6
8
16’ x 48” (488cm x 122cm)
4273
16173
4
5
6
8
16’ x 52” (488cm x 132cm)
4614
17464
5
6
7
8
18’ x 42” (549cm x 107cm)
4786
18115
5
6
7
8
18’ x 48” (549cm x 122cm)
5455
20647
6
7
8
12
15’ x 36” (457cm x 91cm)
3282
12422
3
4
5
6
15’ x 42” (457cm x 107cm)
3861
14614
4
5
6
8
15’ x 48” (457cm x 122cm)
4440
16805
5
6
6
8
16’ x 48” (488cm x 122cm)
5061
19156
5
6
7
8
18’ x 48” (549cm x 122cm)
6423
24311
7
8
9
12
21’ x 52” (640cm x 132cm)
9533
36082
-
-
-
-
24’ x 52” (732cm x 132cm)
12481
47241
-
-
-
-
16’ x 48” (488cm x 122cm)
5061
19156
5
6
7
8
18’ x 48” (549cm x 122cm)
6423
24311
7
8
9
12
18’ x 52” (549cm x 132cm)
6981
26423
-
-
-
-
20’ x 48” (610cm x 122cm)
7947
30079
-
-
-
-
22’ x 52” (671cm x 132cm)
10472
39637
-
-
-
-
24’ x 52” (732cm x 132cm)
12481
47241
-
-
-
-
26’ x 52” (792cm x 132cm)
14667
55515
-
-
-
-
15’8” x 49” (478cm x 124cm)
4440
16805
5
6
6
8
16’8” x 49” (508cm x 124cm)
5061
19156
5
6
7
8
18’8” x 53” (569cm x 135cm)
6981
26423
-
-
-
-
OVAL FRAME 18’ x 10’ x 42” (549cm x 305cm x 107cm)
POOL
20’ x 12’ x 48” (610cm x 366cm x 122cm)
2885
10920
3
4
5
6
4393
16628
5
5
6
8
15’ x 9’ x 48” (457cm x 274cm x 122cm)
3484
13187
3
4
5
6
18’ x 9’ x 52” (549cm x 274cm x 132cm)
RECT. ULTRA
20’ x 10’ x 52” (610cm x 305cm x 132cm)
FRAME POOL
24’ x 12’ x 52” (732cm x 366cm x 132cm)
4545
17203
5
6
7
8
5835
22085
6
7
8
12
8403
31805
-
-
-
-
32’ x 16’ x 52” (975cm x 488cm x 132cm)
14364
54368
-
-
-
-
SEQUOIA
SPIRIT®
POOL SET
SAVE THESE INSTRUCTIONS
Page 14
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
INTEX POOLS OPERATING TIME TABLE (WITH CYANURIC ACID)
Water Capacity (Calculated at Operating Time (hours) Intex Filter
90% for Frame Pool and 80% at different ambient/air
pump
temperatures
for Easy Set & Oval Pool)
Operating
Time
10 - 19°C 20 - 28°C 29 - 36°C
(Gals)
(Liters)
(50 - 66°F) (68 - 82°F) (84 - 97°F) (hours)
Pool Size
MODEL: ECO8220G/8230G
EASY SET®
POOL
CIRCULAR
METAL
FRAME POOL
ULTRA
FRAME®
POOL
15’ x 33” (457cm x 84cm)
2587
9792
1
2
3
4
15’ x 36” (457cm x 91cm)
2822
10681
1
2
3
4
15’ x 42” (457cm x 107cm)
3284
12430
1
2
3
4
15’ x 48” (457cm x 122cm)
3736
14141
1
2
3
4
16’ x 42” (488cm x 107cm)
3754
14209
1
2
3
4
16’ x 48” (488cm x 122cm)
4273
16173
2
3
3
4
16’ x 52” (488cm x 132cm)
4614
17464
2
3
4
6
18’ x 42” (549cm x 107cm)
4786
18115
2
3
4
6
18’ x 48” (549cm x 122cm)
5455
20647
2
3
4
6
15’ x 36” (457cm x 91cm)
3282
12422
1
2
3
4
15’ x 42” (457cm x 107cm)
3861
14614
1
2
3
4
15’ x 48” (457cm x 122cm)
4440
16805
2
3
4
6
16’ x 48” (488cm x 122cm)
5061
19156
2
3
4
6
18’ x 48” (549cm x 122cm)
6423
24311
3
4
5
6
21’ x 52” (640cm x 132cm)
9533
36082
4
5
6
8
24’ x 52” (732cm x 132cm)
12481
47241
6
6
7
8
16’ x 48” (488cm x 122cm)
5061
19156
2
3
4
6
18’ x 48” (549cm x 122cm)
6423
24311
3
4
4
6
18’ x 52” (549cm x 132cm)
6981
26423
3
4
5
6
20’ x 48” (610cm x 122cm)
7947
30079
3
4
5
6
22’ x 52” (671cm x 132cm)
10472
39637
5
5
6
8
24’ x 52” (732cm x 132cm)
12481
47241
5
6
7
8
26’ x 52” (792cm x 132cm)
14667
55515
7
7
8
12
15’8” x 49” (478cm x 124cm)
4440
16805
2
3
4
6
16’8” x 49” (508cm x 124cm)
5061
19156
2
3
4
6
18’8” x 53” (569cm x 135cm)
6981
26423
3
4
5
6
OVAL FRAME 18’ x 10’ x 42” (549cm x 305cm x 107cm)
POOL
20’ x 12’ x 48” (610cm x 366cm x 122cm)
2885
10920
1
2
3
4
4393
16628
2
3
3
4
15’ x 9’ x 48” (457cm x 274cm x 122cm)
3484
13187
1
2
3
4
18’ x 9’ x 52” (549cm x 274cm x 132cm)
RECT. ULTRA
20’ x 10’ x 52” (610cm x 305cm x 132cm)
FRAME POOL
24’ x 12’ x 52” (732cm x 366cm x 132cm)
4545
17203
2
3
4
6
5835
22085
2
3
4
6
8403
31805
4
4
5
6
32’ x 16’ x 52” (975cm x 488cm x 132cm)
14364
54368
6
7
8
12
SEQUOIA
SPIRIT®
POOL SET
IMPORTANT
­­­
The
filter pump running time should be 1 hour longer than the required operating time
of the Saltwater System.
SAVE THESE INSTRUCTIONS
Page 15
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
SALT CALCULATION FORMULA FOR ALL POOLS
Salt Needed for Startup
(Lbs)
Salt Needed for Startup
(Kgs)
Water Capacity (Gals) x 0.025 Water Capacity (Liters) x 0.003
Salt Needed when
Salt Needed when
Low Salt Detected (Lbs) Low Salt Detected (Kgs)
Water Capacity (Gals) x 0.0067
Water Capacity (Liters) x 0.0008
SALT TABLE FOR COMMON NON-INTEX POOLS
Water Capacity
(Gals)
(Liters)
2
000
4000
6000
8000
10000
12000
14000
Salt Needed when
Low Salt Detected
(CODE “91”)
Salt Needed for Startup
(Lbs)
(Kgs)
(Lbs)
(Kgs)
50
100
150
200
250
300
350
20
45
65
90
110
135
160
10
25
40
55
70
80
95
5
10
20
25
30
35
45
7500
15000
22500
30000
37500
45500
53000
CYANURIC ACID TABLE FOR COMMON NON-INTEX POOLS
Cyanuric Acid Needed for Startup
0.03g/L (30ppm)
Water Capacity
(Gals)
(Liters)
(Lbs)
(Kgs)
2000
4000
6000
8000
10000
12000
14000
7500
15000
22500
30000
37500
45500
53000
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.23
0.45
0.68
0.90
1.13
1.37
1.59
OPERATING TIME TABLE FOR COMMON NON-INTEX POOLS (WITH CYANURIC ACID)
Operating Time (hours) at different ambient/air temperatures
Water Capacity
ECO7220G/7230G
(Gals)
(Liters)
10 - 19°C
(50 - 66°F)
20 - 28 °C
(68 - 82 °F)
2000
4000
6000
8000
10000
12000
14000
7500
15000
22500
30000
37500
45500
53000
2
4
6
-
3
5
7
-
ECO8220G/8230G
29 - 36 °C
(84 - 97 °F)
10 - 19°C
(50 - 66°F)
20 - 28 °C
(68 - 82 °F)
29 - 36 °C
(84 - 97 °F)
4
6
8
-
1
1
2
3
4
5
6
1
2
3
4
5
6
7
2
3
4
5
6
7
8
SAVE THESE INSTRUCTIONS
Page 16
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
OPERATION INSTRUCTIONS
1. Turn on the filter pump.
2. Start up the unit:
Plug the power cord into the electrical
outlet and test the RCD (circuit breaker). Switch on the unit. Flashing code “00”
appears on the electronic control station’s
LED, indicating that the unit is ready to be
programmed.
3.
Set operating hours for Saltwater system:
With code “00” flashing, press
button to set the
desired operating hours. See the “Operating Time
Table” for the required operating hours related to each
pool size. Pressing
will increase the time from 01
to 12 hours maximum. If you have selected too many
hours keep pressing
to repeat the cycle.The built-in
(1 to 12 hours max per cycle)
timer will now activate your Saltwater System, at the
same time each day, for the number of hours you have set.
NOTE: The Saltwater System will not operate if the filter pump is not operating. Make sure to
program your filter pump (or start it manually) for operation beginning 5 minutes before the
saltwater system and finishing 15 minutes after the saltwater system.
4. Lock keypad controls:
With the desired hour value showing, press button until you hear a
“beep”. A green “WORKING” indicator on the control panel will light up
within a few seconds to indicate that the saltwater system has started
chlorine production. Locking the control buttons into this setting prevents
unauthorized changing of the operating cycle.
NOTE: If you forget to lock the keypad controls, the system will
automatically lock it and start working 1 minute later.
5.
Readjust operating time if necessary:
The operating hours can be re-adjusted if necessary. Press
button
until you hear a “beep” to unlock the keypad and the current programmed
time will flash. Repeat steps 3 to 4.
SAVE THESE INSTRUCTIONS
Page 17
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
OPERATION INSTRUCTIONS (continued)
6.
•
Boost cycle
First time installation, press and hold “BOOST”
button for 5 seconds until the indicator lights up and the LED display “80”. This indicates that the saltwater
system has started E.C.O. and more chlorine sanitizer
production. You can press and hold the “BOOST” button for
another 5 seconds until the indicator is off, which will cancel
the Boost cycle.
•
The boost operating hours is 8 times the amount of time programmed into the system, i.e. if your saltwater system operating time is 2 hours, the boost procedure will run 8 x 2 = 16 hours.
After boost procedure has been completed, the system will automatically switch to the
normal working mode.
•
•
Once the boost is operating, check whether the filter pump operating hours have been set properly. For example, the boost operating time is 8 hours, the filter pump should be set to run for 8 hours at least. Increase the filter pump operating time if necessary.
Note: If an Intex filter pump is attached to the system, set the pump switch to on “I” position.
7.
•
Stand-by/power saving mode:
When the cycle ends, the green “SLEEP” indicator on the
control panel lights up and the LED display flashes “93”. The system is now in Stand-By mode. After a while, it shuts down and sets itself in a Power Saving mode. The system will automatically turn itself back on in 24 hours, starting its daily cycle of chlorine production.
•
The “SLEEP” indicator stays on, while the system is in the Power Saving mode. The LED display however, goes blank
after 5 minutes. Press any button (
or
) to view the last
LED code.
After a heavy rain or if the pool is dirty, press the “BOOST” button to shock the pool again.
SAVE THESE INSTRUCTIONS
Page 18
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
LED CODE CHART
LED Reading
Definitions
80
Boost Mode
00
Stand-By Mode (Start-up)
01
Minimum Operating Hour (1 hour remaining)
02
Operating Hours (2 hours remaining)
03
Operating Hours (3 hours remaining)
04
Operating Hours (4 hours remaining)
05
Operating Hours (5 hours remaining)
06
Operating Hours (6 hours remaining)
07
Operating Hours (7 hours remaining)
08
Operating Hours (8 hours remaining)
09
Operating Hours (9 hours remaining)
10
Operating Hours (10 hours remaining)
11
Operating Hours (11 hours remaining)
12
Maximum Operating Hours (12 hours remaining)
90
Alarm Code (Low Pump Flow / No Flow)
91
Alarm Code (Low Salt Level)
92
Alarm Code (High Salt Level)
93
Stand-By Mode (Operating Process finished)
“BLANK”
No Power or “Power Saving Mode” waiting to start next
Saltwater System cycle.
IMPORTANT
When Code “90” alarm is shown, ensure the timer of the filter pump is set
one (1) hour longer than the Saltwater System.
If the filter pump does not have a built-in timer, the filter pump needs to
be turned on/off manually every day.
SAVE THESE INSTRUCTIONS
Page 19
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
SALTWATER SYSTEM STATIONARY MOUNTING
Some countries, especially in the European community, require the product to be
secured to the ground or to a base in a permanent upright position. Check with
your local authorities to determine if there is a regulation in your area regarding
above-the-ground swimming pool filter pumps. If yes, then the product can be
mounted to a platform using the two holes located in the base. See drawing
below.
The product can be mounted on a cement base or onto a wooden platform
to prevent accidental tipping. The mounting holes are 6.4 mm in diameter.
Total assembly must exceed 18kg .
Model ECO7220G/7230G: 90mm
Model ECO8220G/8230G: 97mm
m
m
184
SAVE THESE INSTRUCTIONS
Page 20
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
MAINTENANCE
IMPORTANT
Unplug the power cord before cleaning your system. Also close the plunger valves on
your pool or insert the black hat-like plugs in the strainer opening to prevent water
spillage. After completing all maintenance tasks, you must plug the power cord back in
and open the plunger valves or remove the plugs.
Flow Sensor Cleaning
1.
2. In a counter-clockwise motion unscrew the collar of the flow sensor (6) and remove it from
the electrolytic cell conduit. See “Part Reference”.
If deposits and debris are seen on the surface of the flow sensor, then use a garden hose to
wash it off.
Locator Notch
Hinge
Connection Ridge
3.
4. If flushing with water does not remove the deposits, use a plastic brush to clean the surface
and the hinge if necessary. Do not use a metal brush.
After the flow sensor has been inspected and cleaned, align the locator notch on the flow
sensor to the connection ridge in the conduit. Now turn the collar in a clockwise motion,
tightening the sensor back into its position. Do not overtighten.
Titanium and E.C.O. Electrodes Cleaning
The titanium electrode and E.C.O. electrodes have a self cleaning function incorporated into the
electronic control’s programming. In most cases this self cleaning action will keep the
electrodes working at optimum efficiency. If the pool water is hard (high mineral content) the
electrodes may require periodic manual cleaning. ­­­­­­To maintain maximum performance, we
recommend that you open and visually inspect the titanium and E.C.O. electrodes (4 & 5)
monthly.
The following steps provide instructions on how to clean your cell.
Inspection and cleaning:
1. Switch off the unit, unplug the power cord from the electrical socket.
2. For filter pumps with 1-1/4” (32mm) hose size - To prevent water from flowing out of the
pool, unscrew the strainer grids from the strainer connectors and insert the hat-like plugs into
the strainer connectors.
For filter pumps with 1-1/2” (38mm) hose size - Turn both plunger valve handles fully
clockwise until they stop. This closes the valve, prevents the water from flowing out of the
pool.
SAVE THESE INSTRUCTIONS
Page 21
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
MAINTENANCE (continued)
3. Disconnect the 2 hoses from the Saltwater System, and attach the cell covers (9) to the inlet and outlet of the electrolytic cell (3).
4. Unscrew the collar of the flow sensor (6) and pull out the flow sensor from the electrolytic
cell (3) housing.
5. Pour kitchen grade vinegar into the electrolytic cell (3) to immerse the titanium and ECO electrodes. 6. Open one side of the cell cover (9), drain and properly dispose of the vinegar. Connect the
hose which goes from the pool to the cell. Flush the electrolytic cell housing with the pool water.
7. Reverse steps 3, 4, 5 and 6 to reconnect the electrolytic cell.
SAVE THESE INSTRUCTIONS
Page 22
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
MAINTENANCE (continued)
INTEX TEST STRIPS (PACKED WITH THE PRODUCT)
®
The Test Strips can test the “Free Chlorine”, “pH”, “Calcium Hardness” and “Total Alkalinity”
levels at the same time. We recommend that you test the water chemistry weekly, and maintain
the chlorine concentration at 0.5-3.0 ppm.
Directions and Use
1. Dip the entire strip into the water and remove immediately.
2. Hold the strip level for 15 seconds. Do­not shake excess water from the strip.
3. Now compare the strip pad to the color chart on the packaging label. If necessary, adjust the chemical level in the pool water. It is very important, to use the proper technique when
testing the water's chemical level. Read and follow the written strip instructions carefully.
LONG TERM STORAGE
1.
2.
3.
4.
5.
Disconnect the power cord from the electrical outlet.
After the pool is completely empty, disconnect the Saltwater System from the hoses by reversing the installation instructions.
Air-dry the unit before you store it. This might be a good time to visually inspect and clean the electrolytic cell.
Store the unit and accessories in a dry place. The temperature should be controlled, between 32 degrees Fahrenheit (0 degrees Celsius) and 97 degrees Fahrenheit (36 degrees Celsius).
The original package can be used for storage.
SAVE THESE INSTRUCTIONS
Page 23
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
POOL MAINTENANCE & CHEMICAL DEFINITIONS
Preferred Water Chemistry Reading
Minimum
Ideal
Free Chlorine
0
0.5 - 3.0 ppm
Combined Chlorine
0
0 ppm
pH
7.2
7.4 - 7.6
Total Alkalinity
40 ppm
80 ppm
Calcium Hardness
50 ppm
100 - 250 ppm
Stabilizer (Cyanuric Acid)
10 ppm
20 - 40 ppm
Maximum
5.0 ppm
0.2 ppm
7.8
120 ppm
350 ppm
50 ppm
Consult with local swimming pool dealer for water treatment.
Free Chlorine - Is the chlorine residual present in pool water.
Combined Chlorine - Is formed by the reaction of free chlorine with ammonia wastes.
Result if too high - Sharp chlorinous odor, eye irritation.
pH - A value that indicates how acidic or basic a solution is.
Result if too low - Corroded metals, eye & skin irritation, destruction of
total alkalinity.
Result if too high - Scale formation, cloudy water, shorter filter runs,
eye & skin irritation, poor chlorine efficiency.
Total Alkalinity - Indicates the degree of the water's resistance to change in pH.
It determines the speed and ease of pH change, so always adjust total
alkalinity before adjusting the pH level.
Result if too low - Corroded metals, eye & skin irritation. Low alkalinity
will cause the pH to be unstable. Any chemical
added to the water will have an affect on pH.
Result if too high - Scale formation, cloudy water, eye & skin
irritation, poor chlorine efficiency.
Calcium Hardness - Refers to the amount of calcium and magnesium dissolved in the water.
Result if too high - Eye & skin irritation, difficulty balancing water and
poor chlorine efficiency. Scale will form and will cause the water to become cloudy.
Stabilizer - Stabilizers extend the life of chlorine in swimming pools.
(Cyanuric Acid)
• Do not add pool chemicals directly to the skimmer. This may damage the cell.
• Maintaining a salt and sanitizer level above the recommended range can contribute to the
corrosion of the pool equipment.
• Check the expiry date of the test kit as the test results may be inaccurate if the kit is used after
that date.
• If, due to heavy pool usage, it is required to increase the sanitizer level, then use a chemical
based on trichlor, TCCA or dichloro.
SAVE THESE INSTRUCTIONS
Page 24
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
TROUBLESHOOTING GUIDE
PROBLEM
CAUSE
SOLUTION
INSUFFICIENT
CHLORINE
• Insufficient operating hours of the Saltwater System.
• The salt level in the pool water
is less than 2000 ppm. This is insufficient.
• Chlorine loss due to intense sunlight exposure.
• The bather load has increased.
• Clogged or dirty electrolytic cell.
• High UV level exposure.
•
•
•
•
•
•
•
Increase the daily Saltwater System
operating time. See “Operating Instructions”. Check the salt level with the Test Kit. Adjust as needed. See “Salt & Pool Water Volumes”.
Use a pool cover when the pool is not in use and/or when the unit is operating.
Increase the daily Saltwater System
operating time. See “Operating Instructions”.
Remove the cell for inspection, clean it if
necessary. See “Maintenance”.
Cover the pool with a pool cover for 2 days with the device running and then test the water using the test strips.
If the pool is clean and clear, add stabilizer
to the water and then test the water with the device running.
WHITE FLAKES IN
THE WATER
• Excessive calcium hardness is present in pool water.
•
Drain about 20 to 25% of the pool water and add fresh water to decrease the calcium hardness. Inspect the
electrolytic cell for scale buildup. Clean the electrolytic cell if necessary.
NO LED DISPLAY
•
•
•
•
•
•
•
•
•
Plug the cell cord firmly into the cell housing receptacle.
Find out the switch and turn on.
Reset the RCD.
Contact Intex Service Center.
Contact Intex Service Center.
No power supply.
RCD has not reseted.
A power fuse has blown.
LED failure.­­
SAVE THESE INSTRUCTIONS
Page 25
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
TROUBLESHOOTING GUIDE (continued)
LED PANEL
CODE
PROBLEM
SOLUTION
LED Panel Code Flash & Alarm On (NOTE: Always turn off the power before cleaning and servicing).
1. Filter pump not attached to
system and/or switch on.
• Ensure filter pump is attached and
operating. See "Setup Instruction".
2.Circulation line is blocked.
• If your unit has plunger valves, ensure that they are open.
• Clear your filter cartridge and cell from debris and dirt. See “Maintenance”.
• Release all trapped air in the circulation line. See the filter pump manual.
• Check the direction of the inlet and the outlet hose. Reverse the hoses if
necessary. See “Set Up Instructions”.
3.Incorrect inlet and outlet hose direction.
4.Scale on the flow sensor.
• Clean the flow sensor, paying special attention to the hinge. See “Maintenance”.
5.Flow sensor cord is loose.
• Plug the flow sensor firmly into the flow sensor receptacle.
6.Inner timer conflict between
filter pump and saltwater system.
• Reset both timers on the filter pump and
saltwater system.See “Boost Cycle”.
7.Flow sensor failure.
• Contact Intex Service Center.
­1.Dirt or scale on titanium plates.
• Remove the electrolytic cell for
inspection. Clean it if necessary.
See “Maintenance”.
2.Low salt level / No salt.
• Add salt. See “Salt & Pool Water Volumes”.
3.Electrolytic cell cord is loose.
• Ensure that the cell cord is plugged firmly into the cell housing receptacle.
4.Possible electrolytic cell failure.
• Contact Intex Service Center. Replace the cell if needed.
1.High salt level.
• Partially drain the pool and refill it with fresh water. See “Salt & Pool Water Volumes”.
1.Display and all lights are off - the system does not power up.
• Household voltage is too high or too low (+ 20%). Check the voltage is within the range stated on the device housing.
•Contact Intex Service Center.
IMPORTANT
If you continue to experience difficulty, please contact our Consumer Service Department for
assistance. See separate “Authorized Service Centers” sheet.
SAVE THESE INSTRUCTIONS
Page 26
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
GENERAL AQUATIC SAFETY
Water recreation is both fun and therapeutic. However, it involves inherent risks
of injury and death. To reduce your risk of injury, read and follow all product,
package and package insert warnings and instructions. Remember, however, that
product warnings, instructions and safety guidelines cover some common risks
of water recreation, but do not cover all risks and dangers.
For additional safeguards, also familiarize yourself with the following general
guidelines as well as guidelines provided by nationally recognized Safety
Organizations:
• Demand constant supervision. A competent adult should be appointed as a “lifeguard”
or water watcher, especially when children are in and around the pool.
• Learn to swim.
• Take the time to learn CPR and first aid.
• Instruct anyone who is supervising pool users about potential pool hazards and about
the use of protective devices such as locked doors, barriers, etc. • Instruct all pool users, including children what to do in case of an emergency.
• Always use common sense and good judgement when enjoying any water activity.
• Supervise, supervise, supervise.
SAVE THESE INSTRUCTIONS
Page 27
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
260
GS
LIMITED WARRANTY
TM
Your Krystal Clear Saltwater System has been manufactured using the highest
quality ­materials and workmanship. All Intex products have been inspected and
found free of defects prior to leaving the factory. This Limited Warranty applies only
TM
to the Krystal Clear Saltwater System and accessories listed below.
The following provision is only valid within the European member states countries:
The legal regulation of Directive 1999/44/EC will not be effected by this Intex
warranty.
The provisions of this Limited Warranty apply only to the original purchaser and is
not transferable. This Limited Warranty is valid for the period noted below from the
date of the initial retail purchase. Keep your original sales receipt with this manual,
as proof of purchase will be required and must accompany warranty claims or the
Limited Warranty is invalid.
TM
Krystal Clear Saltwater System Warranty – 2 Years
Titanium electrode Warranty – 1 Year
E.C.O. electrode Warranty – 1 Year
Hoses, Plunger Valves & Fittings Warranty – 180 days
If a manufacturing defect is found within the periods noted above, please contact the
appropriate Intex Service Center listed in the separate “Authorized Service Centers”
sheet. The Service Center will determine the validity of the claim.
IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS WARRANTY
AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR
EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT
OR CONSEQUENTIAL DAMAGES OR LIABILITIES. Some countries, or jurisdictions
do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
This Limited Warranty does not apply if the products are subject to negligence,
abnormal use or operation, accident, improper operation, improper voltage or current
contrary to operating instructions, or to damage by circumstances beyond Intex’s
control, including but not limited to, ordinary wear and tear and damage caused by
exposure to fire, flood, freezing, rain, or other external environmental forces. This
Limited Warranty applies only to those parts and components sold by Intex. The
Limited Warranty does not cover unauthorized alterations, repairs or disassembly by
anyone other than Intex Service Center personnel.
The costs associated with the loss of pool water, chemicals or water damage are not
covered by this warranty. Injury or damage to any property or person is not covered
by this warranty.
SAVE THESE INSTRUCTIONS
Page 28
Download PDF
Similar pages