PRODUCT RANGE
a
nt
eo
9 • 200
ry
96
9
1
June 2009
a n niv e rs
a
since 1969
More than 100.000 tail-lifts
worldwide
eo
ry
1
a
nt
9 • 200
9
96
a n niv e rs
a
Know How - From 1969
Founded in 1969, Anteo now produce the
widest range of advanced loading taillifts available worldwide thanks to the
experience developed over many years
in the design and production of hydraulic
components for the major European
machinery manufacturers.
In 1989 Anteo started tail-lift production
and rapidly achieved outstanding the
national and international recognition,
soon becoming world leaders in the
design and production of tail lifts.
The factors that contributed and contribute
still today to the enlargement of Anteo’s
product image in the world are:
-a wide range;
- solutions that anticipate the costumer
needs;
- a high safety level;
- reliability over time;
- high quality components;
- checks and tests on the finished
products.
1
Anteo, a passion for reliability
Advanced technology
Anteo’s considerable design capacity
is one of the fundamental pillars for
producing highly reliable products.
The industrial spirit of a leading-edge
company which is always on the move
and in search of new manufacturing
technologies.
-3D designs together with structural
calculations and finished components;
-prototypes are fully tested with 50,000
fatigue cycles before the large-scale
production is started;
-Capacity to devise simple but functional
designs;
-Care over components and details;
-Use of electrical parts without electronic
components, which are much less sensitive
to faults and are easy to maintain;
-Strict controls start with the incoming raw
materials and continue along the whole
production line to the final function tests
carried out on all tail-lifts before they are
packed and dispatched to customers.
2
All the tail-lifts’ main structures and most
of the components are manufactured in
the 3 Anteo factories that offer customers
a rapid and very flexible service.
The personnel are highly qualified and
constantly receive training to update their
skills. They use automatic robotized FMS
machines so that a consistently high level
of product quality can be maintained.
ar ts
steel p
c
raulic
xacr yli
e
h
All hyd
L
T
with K
d
is
te
s
a
e
e
r
ho
are tr
-catap
electro
Use of high quality components
and standardization
-All pins are made using steel which
is chromium-plated or treated with
electrocataphoresis.
-Bushings have been treated so that they
do not require lubrication.
-Rods with high
chromium plating.
corrosion-resistant
-Sandblasting, washing with phosphate
liquids, painting and drying at high
temperature
are
processes
which
guarantee high corrosion resistance and
a quality of finishing which has always
distinguished Anteo’s products.
-Standardization of all electro-hydraulic
components so that the same valves and
electric motors are used throughout the
range, and the use of electric circuits
without electronic parts are synonymous
with quality and efficient post-sales
service.
3
Safety always comes first for
Anteo
All tail-lifts are equipped with safety
systems compliant with the 89/392 EEC
standard and are supplied as a full kit
comprising:
-Control Panel made of shock-resistant
material, requiring a 2-handed use
(illuminated);
-Silent sound-proofed hydraulic unit;
Cantilevers with PIEK
Certificate
F3 CLP 10-15-20-30 special cantilevers 1000 to
3000kgs capacity for quiet
deliveries and night time
operations.
It includes a silent power
pack, sound-deadening
platform coating and automated trolley stops .
-Electric motor with a thermal safety
device which blocks the tail-lift in case of
overheating;
-Flow control valves integrated in the
cylinders to limit the lowering speed in
case of a pipe and/or valve burst;
-Safety solenoid valves on every hydraulic
cylinder;
-Tilt cylinders locked during the lowering
phase until the platform reaches the
ground;
-Automatic tilting of the platform at ground
level;
-Back-lit remote and radio controls for night
use;
-Flags on the platform;
-User operating area marked on the
platform;
-EEC type-approved tail-lifts including antiunderrun bumper;
-EC conformity mark
4
-Operation and maintenance manual and
tail-lift functional testing certificates
included.
Service
End users, large distribution fleets, carriers and assemblers can count on a widespread and professional Anteo Service
Centre network with a wide range of services:
- Sales and customer support with spare
part depot;
- Technical support: assistance, planned
maintenance, repairs;
- Delivery of tail-lifts and components;
- Assembly and support for assembly;
- Theoretical and practical training on
assembly, maintenance, repairs and regular inspections in accordance with EC
regulations;
- Technical support with supply of installation drawings;
- Multi-function Website www.anteo.com
where you will find many services for
customers as well as for the Anteo sales
and support network.
5
NEWS 2009
F3 CLA30
F3 RA
F3HD IVF
F3HD VS
F3HD VSL
F3HD IV
6
page
page
page
page
page
page
19
33
38
39
40
41
panel van lifts
F3 IV 032 - F3 IV 050
F3 RE 032
F3 V050
F3V 075
page 7
page 8
page 9
page 10
cantilever lifts
F3MH 075 - F3MHX 075
F3M 075 - F3M 10
F3 CL 075
F3 CL
F3 CL FRIDGE
F3 CL30
F3 CLA30
REP CL 05 LR
page
page
page
page
page
page
page
page
11
12
14
16
17
18
19
20
retractable lifts
RCE 075
F3 RE/CC
F3 RE/AM
F3 RE/CM - COMPACT
F3 RE30 CC
F2 AB
F3 RE-CL/CC
F2 LR
page
page
page
page
page
page
page
page
21
22
23
24
25
26
27
28
tuckaway lifts
REP LR
REP/1
REP/2 - REP/4
page 29
page 30
page 31
COLUMN TAIL LIFTS
F3 CO
page 32
RAMPS
F3 RA
page 33
OPTIONS
page 34
access lifts for disableD persons
F3 HD IVFL
page 37
F3 HD IVF
page 38
F3 HD VS
page 39
F3 HD VSL
page 40
F3 HD IV
page 41
F3 HD RE
page 42
STEPS
page 43
OPTIONS
page 44
T T
H A
G G
EI N !
W RTI kg
A 45
ST 1
F3 IV 032 - F3 IV 050
INTERNAL TAIL-LIFT - STANDARD PLATFORM
CLASSIC VERSION FOR COMMERCIAL PANEL VANS
panel van
lifts
load capacity: 320 - 500 kg
FUTURA
APPLICATIONS
The F3HD IV 032 tail-lift has been designed for van derived
vehicles, especially:
Citroen JUMPER
Citroen RELAY
Fiat
DUCATO
Ford
TOURNEO
Ford
TRANSIT
Iveco
DAILY
Mercedes Benz
SPRINTER
Nissan INTERSTAR
Nissan PRIMASTAR
Opel MOVANO
Opel
VIVARO
Peugeot BOXER COMBI
Renault MASTER
Renault TRAFIC
Volkswagen CRAFTER
• In order to avoid that sudden size changes from the
vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on
the vehicle as regards to the overall dimensions of the
tail-lift.
TECHNICAL DATA
E
MAX LOAD CAPACITY
WEIGHT
MAX POWER CONSUMPTION
12 V
24 V
UP-STROKE SPEED (FULL LOAD)
DOWN-STROKE SPEED (FULL LOAD)
OIL TANK CAPACITY
12 V
ELECTRIC MOTOR POWER
24 V
WORKING PRESSURE
NOISE LEVEL (**)
Kg
Kg
Amp
Amp
m/min
m/min
l
Watt
Watt
bar
dB
F3IV
032-800
320
145
100
50
5
6
1,8
500
800
140
<70
F3IV
032-1300
320
145
100
50
5
6
1,8
500
800
140
<70
F3IV
050-1300
500
160
110
55
5
6
1,8
500
800
160
<70
F3IV
032-800
920
F3IV
032-1300
920
F3IV
050-1300
920
B
310
310
310
B1
340
340
340
V
800
1300
1300
L
800
800
1100
W
1030
1030
1330
W1
1140
1140
1440
Z
1190
1380
1380
SAFETY DEVICES
- BATTERY DISCONNECT DEVICE WITH KEY MAIN
SWITCH
- TOE GUARD PROTECTION BRIDGE PLATE
STANDARD FEATURES
- INTERNAL CONTROL WITH SPIRAL CABLE
- PLATFORM OF ALUMINIUM OVERLAY ON STEEL
FRAME WITH FIXED FRONT RAMP
OPTIONS
- RADIO CONTROL
- HINGED RAMP/STOP
** Equivalent continuous (A) weighted noise pressure level, in the working place.
THE ABOVE MENTIONED COMPONENTS ARE INDICATIVE AND MAY VARY AS REGARDS TO THE PERFORMANCE. ANTEO RESERVES THE RIGHT TO CHANGE THE WEIGHT AND THE TECHNICAL SPECIFICATIONS WITHOUT PRIOR
NOTICE. NO INDEMNITY FOR DAMAGES MAY BE CLAIMED FROM ANTEO FOR TECHNICAL SPECIFICATION AND WEIGHT CHANGES OR FOR INSTALLATION PROBLEMS DUE TO LACK OF SPACE ON THE FOLLOWING VEHICLES.
7
panel van
lifts
F3 RE 032
UNDER CHASSIS RETRACTABLE TAIL-LIFT (electric deployment and stowage)
VERSION FOR COMMERCIAL PANEL VANS
load capacity: 320
FUTURA
APPLICATIONS
The F3HD IV 032 tail-lift has been designed for van
derived vehicles, especially:
Citroen JUMPER
Citroen RELAY
Fiat
DUCATO
Ford
TOURNEO
Ford
TRANSIT
Iveco
DAILY
Mercedes Benz
SPRINTER
Nissan INTERSTAR
Nissan PRIMASTAR
Opel MOVANO
Opel
VIVARO
Peugeot BOXER COMBI
Renault MASTER
Renault TRAFIC
Volkswagen CRAFTER
• In order to avoid that sudden size changes from
the vehicle manufacturers do not allow the taillift installation, we recommend checking the
available space on the vehicle as regards to the
overall dimensions of the tail-lift.
TECHNICAL DATA
MAX LOAD CAPACITY
WEIGHT
MAX POWER CONSUMPTION
12 V
24 V
UP-STROKE SPEED (FULL LOAD)
DOWN-STROKE SPEED (FULL LOAD)
OIL TANK CAPACITY
12 V
ELECTRIC MOTOR POWER
24 V
WORKING PRESSURE
NOISE LEVEL (**)
8
Kg
Kg
Amp
Amp
m/min
m/min
l
Watt
Watt
bar
dB
F3RE
F3RE
032-1100 032-1200
320
140
100
50
5
6
1,8
500
800
140
<70
320
145
100
50
5
6
1,8
500
800
140
<70
SAFETY DEVICES
- BATTERY DISCONNECT DEVICE WITH KEY
MAIN SWITCH
- TOE GUARD PROTECTION BRIDGE PLATE
STANDARD FEATURES
- INTERNAL CONTROL WITH SPIRAL CABLE
- PLATFORM OF ALUMINIUM OVERLAY ON
STEEL FRAME WITH FIXED FRONT RAMP
OPTIONS
- RADIO CONTROL
- HINGED RAMP/STOP
** Equivalent continuous (A) weighted noise pressure level, in the working place.
THE ABOVE MENTIONED COMPONENTS ARE INDICATIVE AND MAY VARY AS REGARDS TO THE PERFORMANCE. ANTEO RESERVES THE RIGHT TO CHANGE THE WEIGHT AND THE TECHNICAL SPECIFICATIONS
WITHOUT PRIOR NOTICE. NO INDEMNITY FOR DAMAGES MAY BE CLAIMED FROM ANTEO FOR TECHNICAL SPECIFICATION AND WEIGHT CHANGES OR FOR INSTALLATION PROBLEMS DUE TO LACK OF SPACE ON THE
FOLLOWING VEHICLES.
T T
H A
G G
EI N !
W RTI kg
A 79
ST 1
F3 V050
TAIL-LIFT FOR PANEL VANS - 2 CYLINDERS
load capacity: 500 kg
panel van
lifts
LIGHT
COMMERCIALS
APPLICATIONS
The completely new cantilever tail-lift
F3 V050 has been designed and built for the 3.5 ton
panel van range and can be installed easily without
modifications to the host vehicle.
Installation is made quick and easy with individual
mounting brackets for most vans.
F3 V050 is especially designed for:
Citroen JUMPER / RELAY
Fiat NEW DUCATO
Ford NEW TRANSIT
Iveco DAILY
Mercedes NEW SPRINTER
MercedesVITO
Nissan INTERSTAR
Nissan PRIMASTAR
Opel MOVANO
Opel VIVARO
Peugeot BOXER
Renault
MASTER
Renault TRAFFIC
VolksWagen CRAFTER
VolksWagen TRANSPORTER
ar ts
steel p
c
raulic
xacr yli
e
h
All hyd
L
T
with K
d
is
te
s
a
e
e
r
ho
are tr
-catap
electro
Load Capacity
Voltage
Max Power Consumption
Max Pressure Valve Setting
Up-stroke Speed (Full Load)
Down-stroke Speed (Full Load)
Oil Tank Capacity
Noise Level
Electric Motor Power
Standard Platform Depth
Standard Platform Width
500 kg
12 V
130 Amp
140 bar
5 m/min
8 m/min
2 litres
< 70 dB
1600 Watt
1400 mm - 1600 mm
1450 mm
Weight for Complete Tail-lift with
Platform Depth 1400 mm
179 kg
Weight for Complete Tail-lift with
Platform Depth 1600 mm
185 kg
Mounting
Bolted assembly plates
Platform Opening
Powered opening of the platform with 1
double-acting tilting cylinder
Bolted assembly
plates
Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
9
F3V 075
T T
H A
G G
EI N !
W RTI kg
A 90
ST 1
panel van
lifts
TAIL-LIFT FOR PANEL VANS - 4 CYLINDERS
load capacity: 750 kg
LIGHT
COMMERCIALS
APPLICATIONS
The classic F3V 075 tail lift has been designed for factory
panel vans above 3.5 tonnes.
F3V 075 is especially designed for:
Iveco DAILY
Mercedes VARIO
Renault MASCOTT
ar ts
steel p
c
raulic
xacr yli
e
h
All hyd
L
T
K
h
it
w
ated
horesis
are tre
-catap
electro
TECHNICAL DATA
540
580
F3V075C
Mod.
F3V075C
10
Load capacity
(centre of
gravity
at 600 mm)
750 Kg
Standard Platform
Dimensions
Depth
Width
1200
1400*
on demand
A
W58 (mm)
Weight *
Kg
190
E
T
E
(mm)
A
Arm
Length
A
B
B’
max
min
max
min
min
985
137
332
530
-
*Indicative weight of tail-lift supplied in kit with a 1400 mm depth platform. The weight may vary according to width.
Anteo reserves the right to change weights and technical specifications without prior notice.
No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
W
B
T
E
Mod.
W 58
B
Arm
Width
T
300
F3MH 075 - F3MHX 075
HALF LIFT - 2 CYLINDERS
LIGHT
COMMERCIALS
load capacity: 750 kg
APPLICATIONS
The classic F3M range of tail lifts has been designed
for bodied chassis cab vehicles with floor heights up to
1225mm.
The particularly slim arms allows the fitting on very
narrow vans of 2000mm/2100mm (van minimum width to
be checked according to chassis width).
STANDARD EQUIPMENTS
cantilever
lifts
PLATFORM
­- Platform in aluminium alloy.
MECHANICAL FUNCTIONS
-­ Mechanical hydraulic tilting of platform to ground.
­- Tilt of platform in all positions.
­- Anti-friction self-lubricating bushings and chromed
pins.
­- Platform opening with 1 single-acting tilting cylinder
and spring.
raulic
All hyd e treated
r
a
ts
r
a
steel p L hexacr ylic
T
with K ataphoresis
-c
electro
F3MH 075
H
­ YDRAULIC CHARACTERISTICS
Compact power pack equipped with:
­- closing seal.
­- 1 single-acting lifting cylinder with lubrication.
­- 1 single-acting tilting cylinder.
­- Built-in safety solenoid valves on every cylinder.
­- Tank with air filter.
- Chrome-plated steel cylinder rods with high yield limit.
- Flow adjusters compensated on all downward
movements.
CONTROLS
-­ External control box.
­- Illuminated control panel.
- Control with no electronic components.
­- Cut off switch with key.
­- Two-hand use for operator’s safety.
­- Motor with thermal safety device.
­- Motor relay with 80 A silver pin (peak current).
F3MHX 075
MOUNTING
­ ith an adjustable bolted bracket and a bracket that has
W
already been factory-welded in a fixed position. Quick
fitting: rear bumper already bolted in 2 parts.
PRODUCT FINISHING
-­ Material conform to EC standards.
­- Hard chromium-plated steel pins.
­- Anti-friction self-lubricating bushings.
- Delivered fully assembled and tested, it is to be
mounted to the chassis by bolting, eliminating need to
repaint.
Mod.
F3MH 075 C
F3MH 075 H
Load capacity
(center of gravity
at 600 mm)
750 Kg
Standard Platform
A
Weight*
Dimensions
Kg
Depth
Width
min. max.
1200
240
260 470
1400* on demand
248
365 565
1600
E
B
max.
min.
1055
505
186
1225
580
186
T
*Indicative weight of tail-lift supplied in kit without rear bumper and with a 1400 mm depth platform. The weight may vary according to width.
Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
11
CANTILEVER TAIL-LIFTS - 2 CYLINDERS
T T
H A
G G
EI N !
W RTI 234
A G
ST K
F3M 075 - F3M 10
cantilever
lifts
LIGHT
COMMERCIALS
load capacity: 750 kg - 1000 kg
raulic
All hyd e treated
r
a
ts
r
a
steel p L hexacr ylic
T
with K ataphoresis
-c
electro
APPLICATIONS
The classic F3M range of tail lifts has been designed for
bodied chassis cab vehicles. Dedicated mounting brackets
are available for every vehicle type. The assembly is
quick, simple and does not require any modification to the
chassis. F3M 075 and F3M 10 are especially designed for:
Citroën JUMPER - 2006
Fiat DUCATO - 2006
Ford TRANSIT - 2006
Iveco DAILY
Mercedes
SPRINTER - 2006
Nissan CABSTAR
Nissan ATLEON
PeugeotBOXER - 2006
VolksWagen LT/CRAFTER
STANDARD EQUIPMENTS
PLATFORM
­- Platform in aluminium alloy.
MECHANICAL FUNCTIONS
-­ Mechanical hydraulic tilting of platform to ground.
­- Tilt of platform in all positions.
­- Platform opening with 1 single-acting tilting cylinder
and spring.
­ YDRAULIC CHARACTERISTICS
H
­Compact power pack equipped with:
­- closing seal.
­- 1 single-acting lifting cylinder with lubrication.
­- 1 single-acting tilting cylinder.
­- Built-in safety solenoid valves on every cyl.
­- Tank with air filter.
- Chrome-plated steel cylinder rods with high yield limit.
- Flow adjusters compensated on all downward
movements.
CONTROLS
TECHNICAL DATA
-­ External control box.
­- Illuminated control panel.
- Control with no electronic components.
­- Cut off switch with key.
­- Two-hand use for operator’s safety.
­- Motor with thermal safety device.
­- Motor relay with 80 A silver pin (peak current).
Bolted brackets
CHOICE OF MOUNTING
Mod.
F3M 075 C
F3M 075 H
F3M 10 H
F3M 10 HS
12
Load
capacity
(center of gravity
at 600 mm)
750 Kg
1000 Kg
Standard Platform
Dimensions
Depth
Width
1200
1400* on demand
1600
1400*
1600 on demand
1800
Weight*
Kg
A
E
B
T
min.
max.
max.
min.
234
305
470
1055
505
186
242
350
550
1210
580
186
382
205
480
1165
698
260
391
250
585
1375
774
260
*Indicative weight of tail-lift supplied in kit without rear bumper and with a 1400 mm depth platform.
The weight may vary according to width.
Anteo reserves the right to change weights and technical specifications without prior notice.
No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
­ djustable bolted brackets.
A
Installation is made quick and easy with individual
mounting brackets for every van.
F3M 075: aluminium rear-bumper bolted to the arm.
F3M 10: rear-bumper in 3 pieces bolted to the main
beam.
PRODUCT FINISHING
-­ Material conform to EC standards.
­- Hard chromium-plated steel pins.
­- Anti-friction self-lubricating bushings.
- Delivered fully assembled and tested, it is to be
mounted to the chassis by bolting, eliminating need to
repaint.
5 VERSIONS AND VARIOUS SOLUTIONS ACCORDING TO WHEEL BASE AND OVERHANG
F3M 075 - F3M 10
cantilever
lifts
are available for all
vehicles with double “C”
chassis.
ON-OFF
POWER UNIT
F3M 075
can be installed on all
vehicles with top hat
section chassis and vans.
Citroën Fiat Peugeot FLAT
PUSH-BUTTON
PANEL
JUMPER
DUCATO
BOXER
F3M 075
Quick fitting without
making holes in the
chassis using the original
holes.
Note:
The instructions reported refer to vehicles with original chassis that have not been lengthened. If the chassis has been lengthened, refer to the solution described at point 2.
A
A
(mm)
(mm)
Ford TRANSIT
F3M 075 C/H
Quick fitting without
making holes in the
chassis using the original
holes.
SC (mm)
Note:
The instructions reported refer both to vehicles with original chassis and to vehicles with lengthened chassis, with rear-wheel drive.
Mercedes SPRINTER
SPRINTER 06
VolksWagen LT/CRAFTER
Mod.
2XX / 3XX
F3M 075 - F3M 10
Quick fitting without making
holes in the chassis using the
original holes.
MB Sprinter
BM 906
F3M 075
Wheel Base
Bracket
3250
A
3665
B
4325
B
3665
C
4325
D
4025
E
SC (mm)
A
B
C
D
4XX / 5XX
F3M10
616
E
13
T T
H A
G G
EI N !
W RTI kg
A 25
ST 2
F3CL 075
CANTILEVER TAIL-LIFTS - 4 CYLINDERS
load capacity: 750 kg
APPLICATIONS
LIGHT
COMMERCIALS
cantilever
lifts
The cantilever lift F3CL 075 is suitable for vehicles up to
7.5 tonnes.
ar ts
steel p
c
raulic
xacr yli
e
h
All hyd
L
ith KT
w
d
is
te
s
a
e
hor
are tre
-catap
electro
TECHNICAL DATA
Mod.
Arm
Length
Arm Width
(mm)
W123.
(mm)
W58
(mm)
F3CL075C
540
1230
580
F3CL075H
640
1230
580
B’
B
W 12
3
A
E
T
Mod.
F3CL075C
F3CL075H
14
Load
capacity
(centre of
gravity
at 600 mm)
750 Kg
Standard Platform
Dimensions
Depth
Width
1200
1400*
1600
on demand
Weight *
Kg
A
E
B
B1
T
min.
max.
max.
min.
min.
225
235
430
985
448
523
190
230
295
495
1140
526
601
190
*Indicative weight of tail-lift supplied in kit without rear bumper and with a 1400 mm depth platform. The weight may vary according to width.
Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
VARIOUS SOLUTIONS ACCORDING TO WHEEL BASE AND OVERHANG
2006 SPRINTER 2xx 3xx
WB 3250
DUCATO
500
1560
500
450
450
400
Mod. H
W58
300
F3CL 075 are available for all250
vehicles with double “C” chassis.
200
W123 Standard
150
(W58 not available)
0
450
400
Mod. H
250
200
Ford 150
0
TRANSIT
250
500
200
450
150
400 0
300
500
250
450
200
400
A 150
(mm) 3500
50 100 150 200 250 300 350 400 450 500 550
300
Sc (mm)
250
F3CL 075 W58
(W 123 on demand)
150
0
TRANSIT
Mod. H
DUCATO
300
Mod. C
Mercedes SPRINTER 06
VolksWagen CRAFTER
500
250
F3CL 075 W58
(W 123 on demand)
450
200
400
150
A
(mm) 3500
300
50 100 150 200 250 300 350 400 450 500 550
Mod. H
Sc (mm)
Mod. C
250
150
0
50 100 150 200 250 300 350 400 450 500 550
2006 SPRINTER 2xx 3xx
WB 3250
0
400
A
(mm) 350
TRANSIT
Sc (mm)
Mod. C
TRANSIT
Mod. H
500
300
Mod. C
50 100 150
450 200 250 300 350 400 450 500 550
250
Sc (mm)
400
A
Mod. H
200
(mm) 350
150
300 0 50 100 150 200 Mod.
300 350 400 450 500 550
250 C
50 100 150 200 250 300 350 400 450 500 550
A
(mm) 350
500
300
400
Mod. H
Mod. C
450
250
300
400
A 200
(mm) 350
150
250
300
200
250
0
2006 SPRINTER
2xx 3xx
150
0 50 100 150 200 250 300 350 400 450 500 550
WB 3250 Sc (mm)
450
400
A
(mm) 350
500
300
450
250
400
A 200
(mm) 350
150
300 0
50 100 150 200 250 300 350 400 450 500 550
Mod. C
Sc (mm)
200
50 100 150 200 250 300 350 400 450 500 550
150
Sc (mm)
0 50 100 150 200 250 300 350 400 450 500 550
Sc (mm)
2006 SPRINTER
NB: the fitting is referred
to chassis 2xx 3xx
Mod. HWB 3665 - 4325
vehicles with front wheel drive only.
250
150
400
0
2006 SPRINTER 2xx 3xx
WB 3665 - 4325
450
400
500
A
(mm) 350
450
400
A
(mm) 350
Mod. H
300
Mod. C
250
200
250
150
200
0
50 100 150 200 250 300 350 400 450 500 550
Sc (mm)
Mod. H
500
300
450
250
400
A 200
(mm) 350
150
300 0
150
0
Mod. C
Mod. H
50 100 150 200 250 300 350 400 450 500 550
Mod. C
A
(mm) 350
Sc (mm)SPRINTER 2xx 3xx
2006
WB 3665 - 4325
Mod. H
50 100 150
500200 250 300 350 400 450 500 550
300
Sc (mm)
450
Mod. C
250
400
A
200
(mm) 350
Mod. H
150
300 0 50 100 150 200 250 300 350 400 450 500 550
2006 SPRINTER 4xx 5xx
Mod. C
Sc (mm)
250 WB 3665
200
500
2006 SPRINTER
2xx 3xx
150
50 100 150 200 250 300 350 400 450 500 550
WB0 3665
- 4325
450
Sc (mm)
400
A
(mm) 350
500
Mod. H
Mod. C
2006 SPRINTER 4xx 5xx
Mod. H
WB 3665
A
(mm) 200
350
150
300
250
0
50 100
150C
200 250 300 350 400 450 500 550
Mod.
500
0
A
Mod. H
50 100
150350
200 250 300 350 400 450 500 550
(mm)
500
Sc (mm)
450
200
150
400
Sc (mm)
500
50 100
200 250 300 350 400 450 500 550
Mod.150
C 500
450
200
Sc (mm)
50 100 150 200 250 300 350 400 450 500 550
Sc (mm)
Sc (mm)
2006
SPRINTER 4xx 5xx
WB 3665
300
450
250
400
A
200
(mm) 350
150
300 0
Mod. C
Mod. H
2006 SPRINTER 4xx 5xx
50 100
150 200 250
WB
4325
Mod.300
C 350 400 450 500 550
2006 SPRINTER 4xx 5xx
WB 3665
TRANSIT
Mod. H
Mod. C
250
400
Mod. H
Mod. C
Sc (mm)
200
300
450
Mod. H
0
Mod. H
250
2006 SPRINTER 2xx 3xx
Sc (mm)
WB 3665
- 4325
2006 SPRINTER
2xx 3xx
TRANSIT
Sc (mm)
400
WB 3250
Mod. H
Mod. C
2006 SPRINTER 2xx 3xx
50 Mod.
100 C150 200 250 300 350 400 450 500 550
WB 3665
- 4325
500
Mod. H
Sc (mm)
2006
SPRINTER 2xx 3xx
WB 3250
500
300
450
250
400
A
200
(mm) 350
150
300 0
Sc (mm)
50 100 150 200 250 300 350 400 450 500 550
DUCATO
Mod. H
Sc (mm)
50 100 150500
200 250 300 350 400 450 500 550
450
Mod. C
250
450
150
200
150
Mod. C
200
50 100 150500
200 250 300 350
Mod.400
H 450 500 550
150
100 150 200 250 300 350 400 450 500 550
Sc (mm)
0 50
450
500
Mod. H
200
Mod. H
Mod. C
200
500
150
4500
A
(mm) 350
Quick fitting without
making holes in the chassis
using the original holes.
Mod. C
DUCATO
Mod. C
300
250
450
400
A
(mm) 350
400
500
A
(mm) 350
300
Sc (mm)
A
(mm) 350
200
Quick fitting without
making holes in the chassis
using the original holes.
W123
Mod. H
2006 SPRINTER
2xx 3xx
TRANSIT
50 100 150 200
350 400 450 500 550
250 300
WB
3250
Note: The instructions reported refer400
to
A have
vehicles with original chassis that
(mm) 350
not been lengthened
Mod. C
50 100 150500
200 250 300 350 400 450 500 550
500
300
450
250
400
A
200
(mm) 350
150
300 0
Quick fitting without making
holes in the chassis using the
500
original holes.
300
DUCATO
A
(mm) 350
450
A
(mm) 350
A
(mm) 350
250
400
F3CL 075 W58
500
Mod. C
450
Citroën JUMPER 06
Fiat DUCATO 06
PeugeotBOXER 06
DUCATO
cantilever
lifts
400
A
(mm) 350
Opel MOVANO - Renault MASTER
4070
200
150
2006 SPRINTER
4xx 5xx
0 50 100 150 200 250 300 350 400 450 500 550
WB 3665
Mod. H
Sc (mm)
450
400
A
(mm) 350
Mod. C
500
300
450
250
400
A 200
(mm) 150
350
300
2006 SPRINTER 4xx 5xx
Mod. H WB 4325
0
50 100 150500
200 250 300 350 400 450 500 550
Mod. C
250
450
200
400
150
Sc (mm)
250
500
A
(mm) 350
0
Sc (mm)
2006
SPRINTER 4xx 5xx
WB 4325
Mod. H
500200 250 300 350 400
Mod. 450
C
50 100 150
500 550
300
15
F3 CL
CANTILEVER TAIL-LIFT
load capacity:
APPLICATIONS
FUTURA
cantilever
lifts
1000 kg
1500 kg
2000 kg
The classical tail-lift F3CL is the ideal tail-lift for
distribution and for vehicles for continuous use and
several daily unloading operations.
F3CL is suitable for trucks,
semi-trailers and vehicle with low drawbar coupling.
Cantilevers
with PIEK Certificate
F3 CLP 10-15-20-30 special
cantilevers 1000 to 3000kgs capacity
for quiet deliveries and night time
operations.
It includes a silent power pack,
sound-deadening platform coating
and automated trolley stops .
TECHNICAL DATA
Several arms type are available
Arm
F3 CL 10 C
F3 CL 10 H
F3 CL 10 HS
F3 CL 15 C
F3 CL 15 H
F3 CL 15 HS
F3 CL 15 HL
F3 CL 20 C
F3 CL 20 H
F3 CL 20 HS
F3 CL 20 HL
Arm
Length
640
742
895
640
742
895
1040
640
742
895
1040
Mod.
F3 CL 10 C
F3 CL 10 H
F3 CL 10 HS
F3 CL 15 C
F3 CL 15 H
F3 CL 15 HS
F3 CL 15 HL
F3 CL 20 C
F3 CL 20 H
F3 CL 20 HS
F3 CL 20 HL
16
W
78
Arm Width
(centre to centre)
W
W
W
82 118 123
780
780
-
- 1180 - 1180 - 1180 - 1230 - 1230 1523
820
- 1230 1523
- 1230 - 1230 - 1230 1523
820
- 1230 1523
- 1230 -
Load capacity
(centre of gravity
at 600 mm)
1000 Kg
1500 Kg
2000 Kg
W
152
Weight *
Kg
290
305
320
405
420
435
450
415
430
445
460
ar ts
steel p
c
raulic
xacr yli
e
h
All hyd
L
ith KT
w
d
is
te
s
a
e
hor
are tre
-catap
electro
W
B’
B
A
E
T
E
T
B
B’
max
min
A
max
min
min
1135
1285
1525
1150
1320
1550
1700
1150
1320
1550
1700
260
305
385
290
350
420
540
290
350
420
540
500
560
660
520
600
700
820
520
600
700
820
520
620
740
562
626
744
827
562
626
744
827
740
840
960
684
735
866
949
684
735
866
949
T
240
240
240
254
254
254
254
254
254
254
254
*Approximate weight for tail-lift equipped with aluminium platform dimensions 1600 x 2500 mm.
Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions).
The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from
Anteo for changes in technical specifications and/or in weight.
F3 CL FRIDGE
Cantilever tail-lift with insulated platform (Patented)
load capacity:
1500 kg
2000 kg
FUTURA
APPLICATIONS
- Anteo tail-lift, Fridge series, for insulated vans without
rear doors:
cantilever
lifts
- Less weight, more useful capacity on the vehicle, faster
unloading, and therefore more profit.
- Weight of only 505 Kg for 1.500 Kg capacity at 600 mm.
- An integrated structure consisting of aluminium and
synthetic material gives to the tail-lift Fridge strength
and lightness. (Patented)
- K less than 0,4 (W/m2 K)
ar ts
steel p
raulic
cr ylic
d
y
h
e
ll
h
A
L xa
ith KT
w
d
is
te
s
a
hore
are tre
-catap
electro
TECHNICAL DATA
Several arms type are available
Platform dimensions
Model
W
P
F3 CL FRIDGE 15 C
F3 CL FRIDGE 15 H
F3 CL FRIDGE 15 HS
2600 Max
F3 CL FRIDGE 15 HL
F3 CL FRIDGE 20 HS
2600 Max
F3 CL FRIDGE 20 HL
Mod.
F3 CL FRIDGE 15 C
F3 CL FRIDGE 15 H
F3 CL FRIDGE 15 HS
F3 CL FRIDGE 15 HL
F3 CL FRIDGE 20 C
F3 CL FRIDGE 20 H
F3 CL FRIDGE 20 HS
F3 CL FRIDGE 20 HL
1958
1451
2195
1688
2340
1833
1958
1451
2195
1688
2340
1833
G
W
P
F3 CL FRIDGE 20 C
F3 CL FRIDGE 20 H
WxG =
Insulated area
G
Load capacity
(centre of gravity
at 600 mm)
1500 Kg
2000 Kg
G
Weight *
Kg
B
B’
max
E
min
A
max
min
min
505
520
535
550
515
530
545
460
1150
1320
1550
1700
1150
1320
1550
1700
290
350
420
540
290
350
420
540
520
600
700
820
520
600
700
820
562
626
744
827
562
626
744
827
684
735
866
949
684
735
866
949
*Approximate weight for tail-lift equipped with aluminium platform dimensions 1600 x 2500 mm.
Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions).
The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without
prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
T
254
254
254
254
254
254
254
254
17
F3 CL30
APPLICATIONS
CANTILEVER TAIL-LIFTS FOR HEAVY DUTY LOADS
load capacity:
STANDARD EQUIPMENT
FUTURA
cantilever
lifts
2500 kg at 1000 mm
3000 kg at 600 mm
PLATFORM
- Platform in aluminium alloy.
- Teflon wheels to prevent platform wear.
MECHANICAL FUNCTIONS
ar ts
steel p
rylic
raulic
All hyd
L hexac
ith KT
w
d
s
te
horesi
ap
are trea
at
-c
electro
- Powered opening of the platform.
- Automatic hydraulic tilting of platform to ground.
- Tilt of platform in all positions.
- Mechanical stop of tail-lift arms against equipment
(adjustable in 3 positions).
- Support of pre-assembled control box on rear bumper.
- Tail-lift with approved rear bumper, factory-welded on
the main beam of the tail-lift.
HYDRAULIC CHARACTERISTICS
Power pack equipped with:
- Closing seal, compact and soundproof.
- Electrical connections by means of modular extractable
board.
- Electrical board for any type of connection.
- 2 single-acting lifting cylinders with lubrication.
- 2 double-acting tilting cylinders.
- Cylinders protected by rubber gaitors.
- Built-in safety solenoid valves on every cylinder.
- Tank with air filter.
- Chrome-plated steel cylinder rods with high yield limit.
- Flow adjusters compensated on all downward
movements.
TECHNICAL DATA
W
CONTROLS
- External control box.
- Illuminated control panel.
- Control with no electronic components.
- Cut off switch with key.
- Two-hand use for operator’s safety.
- Motor with thermal safety device.
- Motor relay with 350 A silver pin (peak current)
B’
B
A
E
T
Mod.
Load capacity
(centre of gravity
at 600 mm)
F3 CL 30 H
3000 Kg
F3 CL 30 HS
18
The classical tail lift F3 CL30 is the ideal tail lift for use
in distribution where there is a need for continual use in
loading and unloading heavy or specialist loads.
F3 CL30 is suitable for trucks,semi-trailers and vehicle
with low drawbar coupling.
Std. Platform
Dimensions
Depth
Width
1800
2000
Arm
Arm
Length
H
HS
742
895
Weight*
Kg
Arm Width
(centre to centre)
MOUNTING
W 125
1250
1250
- Bolted assembly plates.
PRODUCT FINISHING
E
A
B
B’
max
min. max.
min
min
T
655
1380 420
700
590
740
295
670
1620 500
800
810
960
295
2500
*Indicative weight of tail-lift supplied in kit without rear bumper and with a 1800 mm depth platform.
The weight may vary according to width.
All dimensions are in mm unless otherwise specified. Anteo reserves the right to change weights and technical specifications without
prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
- All steel parts of the hydraulic kit have been
previously sandblasted, then treated with hexacrylic
electrocataphoresis (except for cylinders, painted with
bicomponent polyurethane enamel).
- Material conform to EC standards.
- Steel cataphoresis-treated pins.
- Anti-friction self-lubricating bushings.
- Delivered fully assembled and tested, it is to be
mounted to the chassis by bolting, eliminating need to
repaint.
F3 CLA30
SPECIAL TAIL-LIFTS FOR ANIMALS
load capacity:
APPLICATIONS
NEW
2009
The tail lift F3 CLA30 is the ideal tail lift for use in animals
transportation.
F3 CLA30 is suitable for trucks,semi-trailers and vehicle
with low drawbar coupling.
2500 kg at 1000 mm
3000 kg at 600 mm
STANDARD EQUIPMENT
FUTURA
PLATFORM
ar ts
steel p
raulic
acrylic
All hyd
KTL hex
h
it
w
ted
sis
ea
re
o
tr
h
e
ar
-catap
electro
- Platform in aluminium alloy
- Teflon wheels to prevent platform wear.
cantilever
lifts
Safety gates and
anti-skid not supplied
TECHNICAL DATA
W
E
T
Mod.
F3 CLA 30 HS
Load capacity
(centre of gravity
at 600 mm)
3000 Kg
25.5°
max
1240
A
min 470
max 520
B’
B
Std. Platform
Dimensions
Depth
Width
2608
2500
Weight*
Kg
670
E
A
B
B’
max
min. max.
min
min
810
960
1620 500
800
T
295
*Indicative weight of tail-lift supplied in kit without rear bumper and with a 1800 mm depth platform.
The weight may vary according to width.
All dimensions are in mm unless otherwise specified. Anteo reserves the right to change weights and technical specifications without
prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
19
REP CL 05 LR
APPLICATIONS
The REP CL 05 LR cantilever tail-lifts with manual
opening are the ideal tail-lifts for logistic companies,
vehicle rental companies and tool hire companies.
REP CL 05 LR is very light and compact. Therefore, it
is suitable for smaller vehicles from 3.5 to 7 tons and
pick-up.
The folded platform allows a deep platform to be used
without increasing the drag on the vehicle.
CANTILEVER TAIL-LIFT WITH MANUAL OPENING
REP
cantilever
lifts
CANTILEVER
load capacity: 500 kg
Available dimensions
1100 mm - 600 mm
(1300 mm) - (700 mm)
(1500 mm) - (800 mm)
500 mm
(600 mm)
(700 mm)
GENERAL INFORMATION
PLATFORM
ar ts
steel p
c
raulic
xacr yli
e
h
All hyd
L
ith KT
w
d
is
te
s
a
e
hor
are tre
-catap
electro
­- Platform in aluminium alloy
MECHANICAL FUNCTIONS
-­ Assisted opening of the platform.
­- Automatic adjustment of platform tilt between vehicle
floor and ground.
­- Manually adjustable levelling of platform.
­- Tail-lift with rear bumper already factory-welded on
the main assembly of the tail-lift.
­- Anti-friction self-lubricating bushings and chromeplated pins.
HYDRAULIC CHARACTERISTICS
-­ Compact hydraulic group with security seal.
­- 1 single-acting lift cylinder with lubrication.
­- Built-in safety solenoid valves on the cylinder.
­- Tank with air filter.
­- Chrome-plated steel cylinder rods with high yield.
­- Flow adjusters compensated on downward
movements.
B
TECHNICAL DATA
A
CONTROLS
E
T
D
Load capacity
Mod.
REP
CL
05 LR
20
(centre to centre
at 600 mm
23’’ 7/8)
500 Kg
(1100 lbs)
Standard
A
E
B
platform
Weight *
T
dimensions
min.
max.
max.
min.
Deep x Width
1100 x 2000 mm*** 225 Kg
(43’ x 78’ 3/4**) (496 lbs)
1300 x 2000 mm*** 240 Kg 350 mm 470 mm 1000 mm 907 mm 150 mm
(51’ x 78’ 3/4**) (529 lbs) (13’’ 3/4) (18’’ 1/2) (39’’ 3/8) (35’ 3/4) (5’’ 7/8)
1500 x 2000 mm*** 255 Kg
(59’ x 78’ 3/4**) (562 lbs)
***2000 mm (78’’ 3/4) width available - weight 239 Kg (526 lbs).
***2300 mm (90’’) width max; decreased width available on request.
Centre of gravity of the vehicle depending on the type of platform and the size of the installations on the vehicle (see assembly
instructions).
The above mentioned weights are approximate and may vary according to production.
Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be
claimed from Anteo for changes in technical specifications and/or in weight.
-­ Waterproof external control box fixed to the body.
­- Control with no electronic components, illuminated for
night use.
­- Battery isolator with key.
­- Two-hand use for operator’s safety.
­- Motor with thermal safety device.
­- Motor relay with 350 A silver pin (peak current).
ARM
-­ Available with one type of arm.
­- REP CL 05 LR: distance between centres
678 mm (26’’ 3/4).
ASSEMBLY
­ ounting plates to be welded to the beam by the
M
installer.
PRODUCT FINISHING
-­ Finish painted.
­- Material conform to EC standards.
­- Chrome-plated steel pins and self-lubricating
bushings.
RCE 075
APPLICATIONS
The retractable tail-lift F3RE is the ideal tail-lift for
distribution vehicles due to its versatility, large platforms
and ease of use.
The tail-lift is stowed away under the vehicle making it
ideal for dock loading.
RCE 075 is available for bodied chassis cab vehicles up to
7.5 tonnes GVW.
RETRACTABLE TAIL-LIFT - 4 CYLINDERS
LIGHT
COMMERCIALS
load capacity: 750 kg
STANDARD EQUIPMENTS
PLATFORM
­- Platform in aluminum alloy
MECHANICAL FUNCTIONS
retractable
lifts
- Tail-lift deployment by means of adjustable chromium
plated guides of high yield steel.
- Tail-lift deployment and stowage under chassis by
means of double extension cylinder.
- Automatic hydraulic tilting of platform to ground.
HYDRAULIC CHARACTERISTICS
­ ompact power pack equipped with:
C
­- closing seal, and soundproof.
­- 2 single-acting lifting cylinders with lubrication.
- 2 single-acting tilt cylinders with lubrication.
- Memory cylinder with automatic tilting at ground level.
- 1 double ram for tail-lift deployment and stowage under
chassis.
- Built-in safety solenoid valves on every cylinder.
- Tank with air filter.
- Chrome-plated steel cylinder rods with high yield.
- Flow adjusters compensated on all downward
movements.
TECHNICAL DATA
CONTROLS
­­ External control box.
-
­- Illuminated control panel.
- Control with no electronic components.
­- Cut off switch with key.
­- Two-hand use for operator’s safety.
­- Motor with thermal safety device.
­- Motor relay with 350 A silver pin (peak current)
- Proximity switches for automatic positioning of tail-lift.
Bushes
to be welded
Mod.
RCE 075 H
Load capacity
(center of gravity
at 600 mm)
750 Kg
Standard Platform
A
E
Weight*
Dimensions
Kg
Depth
Width
min. max. max.
1200*
1500**
2100
320
-
450 1210
*Indicative weight of tail-lift supplied in kit with a 1200 mm depth platform.
The weight may vary according to width.
**3 folds special platform.
Anteo reserves the right to change weights and technical specifications without prior notice.
No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
B
T
min.
945
273
1065**
MOUNTING
­- Bushes to be welded to the main beam.
PRODUCT FINISHING
-­ Material conform to EC standards.
­- Chromium-plated steel pins.
­- Anti-friction self-lubricating bushings.
- Delivered fully assembled and tested.
21
F3 RE/CC
RETRACTABLE TAIL-LIFT - CHROMED GUIDES, DOUBLE EXTENSION CYLINDER
load capacity:
APPLICATIONS
FUTURA
retractable
lifts
1000 kg
1500 kg
2000 kg
The retractable tail-lift F3RE is the ideal tail-lift
for distribution vehicles due to its versatility, large
platforms and ease of use.
The tail-lift is stowed away under the vehicle making
it ideal for dock loading.
The F3RE is available for trucks and semi-trailers.
ar ts
steel p
c
raulic
xacr yli
e
h
All hyd
L
T
K
h
it
w
ated
horesis
are tre
-catap
electro
RIGID VEHICLE
1 FOLD PLATFORM
RIGID VEHICLE
2 FOLDS PLATFORM
SEMI-TRAILER
1 FOLD PLATFORM
B'
B'
B'
B
B
E
E
T
E
T
T
B
RIGID VEHICLE
2 FOLDS PLATFORM
1 FOLD PLATFORM
Mod.
22
F3 RE 10 C
F3 RE 10 H
F3 RE 10 HS
F3 RE 15 C
F3 RE 15 H
F3 RE 15 HS
F3 RE 15 HSS
F3 RE 20 C
F3 RE 20 H
F3 RE 20 HS
F3 RE 20 HSS
F3 RE 10 H
F3 RE 10 HS
F3 RE 15 C
F3 RE 15 H
F3 RE 15 HS
F3 RE 15 HSS
F3 RE 20 C
F3 RE 20 H
F3 RE 20 HS
F3 RE 20 HSS
Load capacity
(center of gravity
at 600 mm)
1000 kg
1500 kg
2000 kg
1000 kg
1500 kg
2000 kg
E
max
Platform Depth*
(example)
B
min
B’
min
1200
1350
1580
1130
1290
1530
1595
1130
1290
1530
1595
1350
1580
1130
1290
1530
1595
1130
1290
1530
1595
1560 (600 + 960)
1395 (390 + 1005)
1605 (600 + 1005)
1433 (550 + 883)
1633 (750 + 883)
1633 (750 + 883)
1633 (750 + 883)
1433 (550 + 883)
1633 (750 + 883)
1633 (750 + 883)
1633 (750 + 883)
1283 (700 + 583)
1583 (850 + 733)
1083 (600 + 483)
1283 (700 + 583)
1583 (850 + 733)
1783 (950 + 833)
1083 (600 + 483)
1283 (700 + 583)
1583 (850 + 733)
1783 (950 + 833)
1472
1364
1727
1458
1760
1912
2012
1458
1760
1912
2012
1095
1244
1022
1122
1272
1377
1022
1122
1272
1377
1602
1494
1857
1553
1855
2007
2107
1553
1855
2007
2107
1240
1389
1132
1232
1382
1487
1132
1232
1382
1487
SEMI-TRAILER
T
Weight
Kg**
B
min
B’
min
T
Weight
Kg**
306
306
306
298
298
298
298
298
298
298
298
366
366
366
366
366
366
366
366
366
366
490
515
540
580
605
630
645
600
625
650
665
455
520
510
545
610
630
530
565
630
650
1809
1962
2062
1809
1962
2062
1160
1315
1415
1160
1315
1415
1854
2007
2107
1854
2007
2107
1220
1375
1475
1220
1375
1475
453
453
453
453
453
453
521
521
521
521
521
521
605
630
645
625
650
665
545
610
630
565
630
650
*For 1 fold platform: platforms depth available from 1333 mm to 1983 mm. **Approximate weight for tail-lift with platform width 2450 mm.
Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions).
The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from
Anteo for changes in technical specifications and/or in weight.
F3 RE/AM
RETRACTABLE TAIL-LIFT
ALUMINIUM GUIDES, HYDRAULIC MOTOR AND BRAKE
1000 kg
1500 kg
2000 kg
2500 kg
3000 kg
available
not available yet
APPLICATIONS
FUTURA
load capacity:
The retractable tail-lift F3RE is the ideal tail-lift for
distribution vehicles due to its versatility, large platforms
and ease of use.
The tail-lift is stowed away under the vehicle making it
ideal for dock loading.
The F3RE is available for trucks and semi-trailers.
ar ts
steel p
ylic
raulic
hexacr
All hyd
L
T
K
h
it
w
ated
horesis
are tre
-catap
electro
SIDE FITTING
1 FOLD PLATFORM
SIDE FITTING
2 FOLDS PLATFORM
QUICK FITTING
1 FOLD PLATFORM
2 FOLDS PLATFORM
1 FOLD PLATFORM
SIDE FITTING
Mod.
F3 RE 15 C
F3 RE 20 C
F3 RE 15 H
F3 RE 20 H
F3 RE 15 HS
F3 RE 20 HS
F3 RE 15 HSS
F3 RE 20 HSS
retractable
lifts
Load capacity
(center of gravity
at 600 mm)
E
max
Platform Depth*
(example)
B
min
B’
min
1500 kg
2000 kg
1147
1433 (550+ 883)
1454
1554
1500 kg
2000 kg
1303
1633 (750+ 883)
1756
1856
QUICK FITTING
T
Weight*
Kg
B
min
B’
min
T
Weight*
Kg
318
470
490
-
-
-
-
318
505
525
1750
1855
487
502
522
1903
2008
487
517
537
1500 kg
2000 kg
1544
1633 (750+ 883)
1909
2009
318
520
540
1500 kg
2000 kg
1600
1633 (750+ 883)
2010
2110
318
535
555
2004
2109
487
532
552
Mod.
Load capacity
(center of gravity
at 600 mm)
E
max
Platform Depth
B
min
B’
min
T
Weight*
Kg
B
min
B’
min
T
Weight*
Kg
F3 RE 15 C
F3 RE 20 C
F3 RE 15 H
F3 RE 20 H
F3 RE 15 HS
F3 RE 20 HS
F3 RE 15 HSS
F3 RE 20 HSS
1500 kg
2000 kg
1500 kg
2000 kg
1500 kg
2000 kg
1500 kg
2000 kg
1147
1083 (600 + 483)
1123
1118
375
1303
1283 (700 + 583)
1226
1221
375
1544
1583 (850 + 733)
1379
1374
375
1600
1783 (950 + 833)
1480
1475
375
450
470
485
505
520
540
550
570
-
-
-
-
1220
1221
544
1373
1374
544
1474
1475
544
482
502
517
537
547
567
*Platforms depth from 1333 mm to 1983 mm. **Approximate weight for tail-lift with platform width 2450 mm.
Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions).
The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from
Anteo for changes in technical specifications and/or in weight.
23
F3 RE/CM - COMPACT
RETRACTABLE TAIL-LIFT
CHROMED GUIDES, HYDRAULIC MOTOR AND BRAKE
APPLICATIONS
The retractable tail-lift F3RE/CM COMPACT is the ideal
tail-lift for distribution vehicles due to its versatility, large
platforms and ease of use.
The tail-lift is stowed away under the vehicle making it
ideal for dock loading.
F3RE/CM COMPACT is suggested and especially
designed for rigid vehicles with very short overhang.
ar ts
steel p
c
raulic
xacr yli
e
h
All hyd
L
T
K
h
it
w
ated
horesis
are tre
-catap
electro
B
B
B'
B'
B'
B'
2 RIP
2 RIP
T
T
T
This lift slides in and
out with hydraulic
motor + rack and
pinion drive
E
B
E
B
E
E
TECHNICAL DATA
1 RIP
T
retractable
lifts
1500 kg
2000 kg
FUTURA
load capacity:
No fixings beyond
the rear of lift beam
1 RIP
RIGID VEHICLE
1 FOLDS
PLATFORM
Mod.
F3RE15H
F3RE15HS
F3RE20H
2 FOLDS
PLATFORM
F3RE20HS
24
F3RE15H
F3RE15HS
F3RE20H
F3RE20HS
Load Capacity
(centre of gravity at
600 mm)
1500 kg
2000 kg
1500 kg
2000 kg
E
max
Platform Depth *
(example)
B
min
B’
min
1285
1633 (750 + 883)
1690
1667
1525
1633 (750 + 883)
1843
1821
1285
1633 (750 + 883)
1690
1667
1525
1633 (750 + 883)
1843
1821
1285
1283 (700 + 583)
1044
1022
1525
1583 (850 + 733)
1197
1175
1285
1283 (700 + 583)
1044
1022
1525
1583 (850 + 733)
1197
1175
T
376
376
376
376
Weight **
(Kg)
605
630
605
630
545
610
565
630
* 1 folds platform: platforms depth from 1333 mm to 1983 mm. **Approximate weight for tail-lift with platform width 2450 mm.
Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions). The above mentioned weights are
approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can
be claimed from Anteo for changes in technical specifications and/or in weight.
F3 RE30 CC
APPLICATIONS
RETRACTABLE TAIL-LIFT FOR HEAVY DUTY LOADS
2500 kg at 1000 mm
3000 kg at 600 mm
r ts
teel pa
ylic
aulic s
r
d
y
x
h
e
h acr
All
h KTL
it
w
d
ate
horesis
are tre
-catap
electro
FUTURA
load capacity:
B
Power pack equipped with:
- Closing seal, compact and soundproof.
- Electrical connections by means of modular extractable
board.
- Electrical board for any type of connection through
keyed connectors.
- 2 single-acting lifting cylinders with lubrication.
- 2 single-acting tilt cylinders with lubrication.
- Memory cylinder for repeat automatic tilting at ground
level.
- 1 double ram for tail-lift deployment and stowage under
chassis.
- Cylinders protected by rubber gaitors.
- Built-in safety solenoid valves on every cylinder.
- Tank with air filter.
- Chrome-plated steel cylinder rods with high yield
- Flow adjusters compensated on all downward
movements.
B’
B'
CONTROLS
W
E
T
B
E
- Platform in aluminium alloy.
- Teflon wheels to prevent platform wear.
retractable
lifts
HYDRAULIC CHARACTERISTICS
E T
Arm
Length
Arm
T
T
H
HS
742
895
Arm Width
(centre to centre)
W 75*
W 82*
W 125
756
756
820
820
1250
1250
*on demand
Load capacity
(centre of
gravity
at 600 mm)
F3 RE 30 H
3000 Kg
F3 RE 30 HS
PLATFORM
- Steel guides with high yield limit, treated and chrome
plated with adjustment ability.
- Tail-lift deployment and stowage under chassis by
means of double extension cylinder.
- Automatic hydraulic tilting of platform to ground.
- Mechanical stop of tail-lift arms against equipment
(adjustable in 3 positions).
- Pre-assembled control box support for quick
installation.
- Type approved tail lift platform forms the rear bumper.
B’
B'
Mod.
STANDARD EQUIPMENT
MECHANICAL FUNCTIONS
TECHNICAL DATA
E
The retractable tail lift F3 RE30 CC is the ideal tail lift for
loading and unloading heavy or specialist loads where there
is also a need for dock loading of the vehicle. This is made
possible by the retractable lift stowing under the vehicle
floor when not in use. The F3 RE30 is available for trucks and
semi-trailers.
Std. Platform
Dimensions
Depth
1630
(530+1100)
1730
(530+1200)
Width
CHOICE OF MOUNTING
- Bolted assembly brackets.
E
B
B’
max
min
min
850
1390
1635
1730
340
870
1620
1845
1940
340
Weight*
Kg
- External control box.
- Illuminated control panel.
- Control with no electronic components.
- Cut off switch with key.
- Two-hand use for operator’s safety.
- Motor with thermal safety device.
- Motor relay with 350 A silver pin (peak current)
- Proximity switches for automatic positioning of tail-lift.
T
2450
*Approximate weight for tail-lift with platform dimensions 1630 mm x 2450 mm.
Platforms depth from 1333 mm to 1983 mm.
All dimensions are in mm unless otherwise specified.
Anteo reserves the right to change weights and technical specifications without prior notice.
No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
PRODUCT FINISHING
- All steel parts of the hydraulic kit have been
previously sandblasted, then treated with hexacrylic
electrocataphoresis (except for cylinders, painted with
bicomponent polyurethane enamel).
- Material conform to EC standards.
- Steel cataphoresis-treated pins.
- Anti-friction self-lubricating bushings with lubricator.
- Delivered in assembled kit and tested, mounted to the
chassis by bolting, eliminating the need to re-painting
the vehicle.
25
F2 AB
RETRACTABLE TAIL-LIFT FOR drawbar coupling vehicles
CHROMED GUIDES, DOUBLE EXTENSION CYLINDER
load capacity:
APPLICATIONS
FUTURA
retractable
lifts
1500 kg
2000 kg
The retractable tail-lift F2 AB is the ideal tail-lift for
vehicles with drawbar couplings.
The tail-lift is stowed away under the vehicle making it
ideal for dock loading.
ar ts
steel p
c
raulic
d
y
xacr yli
h
e
ll
h
A
h KTL
it
w
d
is
ate
hores
are tre
-catap
electro
B' (min)
B' (min)
1RIP
2RIP
B (min)
B (min)
CONTRO-TELAIO / SUB-FRAME / CONTRA-CHASIS
CONTRO-TELAIO / SUB-FRAME / CONTRA-CHASIS
T
TELAIO
CHASSIS
CHASIS
T
2 FOLDS PLATFORM
1 FOLDS PLATFORM
RIGID VEHICLE - 1 FOLD PLATFORM
26
Load
Capacity
E
max
Mod.
(centre of
gravity
at 600 mm)
F2AB15HS
1500 kg
1410
F2AB20HS
2000 kg
1410
Mod.
Load
Capacity
(centre of
gravity
at 600 mm)
TELAIO
CHASSIS
CHASIS
E
(max)
E
(max)
E
max
RIGID VEHICLE - 2 FOLDS PLATFORM
Platform Depth *
(example)
B
min
B’
min
1533 (550 + 983)
1681
1771
1583 (600 + 983)
1731
1821
1533 (550 + 983)
1681
1771
1583 (600 + 983)
1731
1821
Platform Depth *
(example)
B
min
B’
min
T
378
378
T
Weight
Kg**
580
750 (min) - 870 (max)
630
600
650
Weight
Kg**
F2AB15HS
1500 kg
1410
1583 (850 + 733)
1288
1378
378
610
F2AB20HS
2000 kg
1410
1583 (850 + 733)
1288
1378
378
630
1221
1655
*For 1 fold platform: platforms depth available from 1333 mm to 1983 mm. **Approximate weight for tail-lift with platform width 2450 mm.
Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions).
The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical
specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
Anteo are not responsible for the positioning and fixing of the drawbar coupling.
F3 RE-CL/CC
DUAL PURPOSE LIFT CANTILEVER OR RETRACTABLE
load capacity: 2000 kg
FUTURA
APPLICATIONS
Anteo, always keeping in mind the customers’ needs
and anticipating the future have manufactured a taillift which can be used both as a retractable tail-lift,
remaining housed under the body when not required,
and as a cantilever tail-lift allowing unloading to be
quicker and easier than using standard retractable taillifts. This model of ANTEO tail-lift has been developed
with transport operators in mind, particularly those on
multi-drop work. F3RE-CL can remain stowed under the
lorry when the vehicle loads on docks or in warehouses
equipped with loading ramps and can be used as a
cantilever tail-lift when it is used to unload the goods.
The driver opens the retractable tail lift as normal at his
first delivery, then uses the lift as a cantilever for the
rest of his deliveries, and stows it away as a retractable
after his final delivery or on returning to his depot.
Considering that it is an occasional cantilever tail-lift
and can be regarded as a retractable tail-lift in every
respect, F3RE-CL has the great advantage of allowing
the body manufacture and operator to utilise maximum
possible lengths allowed.
ar ts
steel p
raulic
cr ylic
d
y
h
e
ll
h
A
L xa
ith KT
w
d
is
te
a
hores
are tre
-catap
electro
PLATFORM LOCK SYSTEM CONVERTS
RETRACTABLE PLATFORM TO
CANTILEVER
RIGID VEHICLE - 1 FOLD PLATFORM
retractable
lifts
RIGID VEHICLE
B'
E
T
B
Not available in W 152 model
Mod.
F3 RE-CL 20 H
F3 RE-CL 20 HS
Load capacity
(center of gravity
at 600 mm)
E
max
Platform Depth*
(example)
B
min
B’
min
T
Weight
Kg**
2000 Kg.
1290
1530
1633 (750 + 883)
1633 (750 + 883)
1760
1912
1855
2007
298
298
625
650
*For 1 fold platform: platforms depth available from 1333 mm to 1983 mm. **Approximate weight for tail-lift with platform width 2450 mm.
Centre of gravity of the vehicle depending on the type of arm and the size of the installations on the vehicle (see assembly instructions).
The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages
can be claimed from Anteo for changes in technical specifications and/or in weight.
27
F2 LR
APPLICATIONS
VERY SMOOTH TO USE
Using the tried and tested features of our well proven
Futura Retractable range of lifts, we have incorporated
the advantage of a flat /horizontal platform. This is
especially suited to Roll Cage operations, but more
specifically to the typical British food industry operator.
Anteo superb guide rail system eliminates any ‘Racking
or Bounce‘ of the lift frame and platform
during deployment and retraction.
Available in Futura version, one can choose to have the
facility of tilting the platform at any level, a must where
the operator loads or unloads on gradients.
RETRACTABLE LEVEL-RIDE
retractable
lifts
1500 kg - 3300 lbs
2000 kg - 4400 lbs
FUTURA
load capacity:
VERY SAFE TO USE
The platform is available with 3 way stops / leading
edges, in column lift style to the three open sides, and
the new FULLY AUTOMATIC mechanically operated
Foot protector/Roll cage stop.
The guard automatically rises and falls as the tail-lift is
operated. As the platform moves away from body floor
level cam locks lift the guard thus preventing anyone on
the platform from trapping or crushing feet or toes, at the
same time holding roll cages firm preventing falling as
the lift descends to ground level. As the lift is raised back
to floor level, the guard automatically falls level with
platform and body floor allowing smooth transition of roll
cages into the vehicle.
F2LR15HS-MR
F2LR20HS-MR
TECHNICAL DATA
VERY EASY TO USE
B
with Anteo automatic positioning in and out.
Deploy platform
- Switch on the isolator in control box.
- Lower lift away from “park” position.
- Using 2-handed control, power out lift.
- Using 2-handed control or wander lead with
changeover switch, raise and lower lift.
Stow platform
- Bring platform to a convenient height.
- Using 2-handed control retract platform to stow
vehicle chassis.
- Raise lift to “park” position.
- Switch off isolator in control box.
A
SIDE RAMP
E
T
min 1190 mm - 46" 3/4
max 1310 mm - 51" 5/8
under
MAIN OPTIONS
- Fixed internal 2 button controls with changeover
switch.
- Wander lead with changeover switch.
- Hinged side ramps 390 mm deep, 500 mm or 620 mm
deep.
- Safety gate.
- Foot control.
- Tilt cylinders.
1928 mm - 75" 5/8
950 mm - 37" 3/8
950 mm - 37" 3/8
FRONT RAMP
FRONT RAMP
2378 mm - 93" 5/8
2390 mm - 94"
28
Model
Load Capacity
(centre of gravity
600 mm - 23” 5/8)
F2 LR 15 HS MR
1500 Kg
(3300 lbs)
F2 LR 20 HS MR
2000 Kg
(4400 lbs)
Standard Platform
Dimensions
Lenght x Width
1000 x 2400 mm
(39” 3/8 x 94” 1/2)
1200 x 2400 mm
(47” 1/4 x 94” 1/2)
1000 x 2400 mm
(39” 3/8 x 94” 1/2)
1200 x 2400 mm
(47” 1/4 x 94” 1/2)
Weight
660 Kg
(1453 lbs)
690 Kg
(1519 lbs)
690 Kg
(1519 lbs)
720 Kg
(1585 lbs)
A
min
max
E
B
max
min
2180 mm
(85” 7/8)
2380 mm
(93” 3/4)
2180 mm
(85” 7/8)
2380 mm
(93” 3/4)
480 mm 495 mm 1550 mm
(18” 7/8) (19” 1/2)
(61”)
480 mm 495 mm 1550 mm
(18” 7/8) (19” 1/2)
(61”)
T
472 mm
(18” 5/8)
472 mm
(18” 5/8)
The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to change weights and technical specifications without prior notice.
No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
REP LR
APPLICATIONS
TUCKAWAY TAIL-LIFT
raulic
All hyd e treated
r
a
ts
r
a
steel p L hexacr ylic
T
K
h
it
w
horesis
-catap
electro
500 kg - 1100 lbs
1130 kg - 2500 lbs
REP
load capacity:
The REP folding tail-lifts are the ideal tail-lifts for
distribution, vehicle rental companies, for vehicles
where the maximum variable use is needed and/or
vehicles for docking work.
REP 05 LR is very light and compact. Therefore, it is
suitable for smaller vehicles from 3.5 to 7 tons.
REP 11 LR is recommended for vehicles weighing more
than 7 tons.
GENERAL INFORMATION
PLATFORM
­- Platform in aluminium alloy
MECHANICAL FUNCTIONS
-­ Assisted opening of the platform.
­- Automatic mechanical connection from platform to
ground.
­- Manually adjustable tilt of platform.
­- Tail-lift with rear bumper already factory-welded on
the main assembly of the tail-lift.
­- Anti-friction self-lubricating bushings and chromeplated pins.
HYDRAULIC CHARACTERISTICS
-­ Compact hydraulic group with security seal.
­- 1 single-acting lift cylinder with lubrication.
­- Built-in safety solenoid valves on the cylinder.
­- Tank with air filter.
­- Chrome-plated steel cylinder rods with high yield.
­- Flow adjusters compensated on downward movements.
tuckaway
lifts
CONTROLS
-­ Waterproof external control box fixed to the body.
­- Control with no electronic components, illuminated for
night use.
­- Battery isolator with key.
­- Two-hand use for operator’s safety.
­- Motor with thermal safety device.
­- Motor relay with 350 A silver pin (peak current).
TECHNICAL DATA
B
ARM
-­ Available with one type of arm.
­- REP 05 LR: distance between centres 678 mm (26’’ 3/4).
­- REP 11 LR: distance between centres 716 mm (28’’ 1/4).
A
ASSEMBLY
E
T
-­ REP 11 LR: bolted assembly plates.
­- REP 05 LR: plates to be welded by the assembler.
D
PRODUCT FINISHING
-­ Finish painted.
­- Material conform to EC standards.
­- Chrome-plated steel pins and self-lubricating bushings.
Mod.
Load capacity
(centre to centre
at 600 mm - 23’’ 7/8)
REP 05 LR
500 Kg
(1100 lbs)
REP 11 LR
1130 Kg
(2500 lbs)
Standard platform
dimensions
Deep x Width
950 x 1530 mm**
(37’’ 3/8 x 60’’ 1/4**)
1150 x 1530 mm**
(45’’ 1/4 x 60’’ 1/4**)
1050 x 2000 mm***
(41’’ 3/8 x 78’’ 3/4***)
1250 x 2000 mm***
(49’’ 1/4 x 78’’ 3/4***)
A
Weight *
min.
211 Kg
(464 lbs)
221 Kg
(486 lbs)
290 Kg
(638 lbs)
305 Kg
(671 lbs)
max.
E
B
max.
min.
350 mm 470 mm 1000 mm 843 mm
(13’’ 3/4) (18’’ 1/2) (39’’ 3/8) (33’’ 1/4)
T
150 mm
(5’’ 7/8)
500 mm 565 mm 1200 mm 1005 mm 210 mm
(19’’ 5/8) (22’’ 1/4) (47’’ 1/4) (39’’ 5/8) (8’’ 1/4)
*weight does not include rear cross member (30 Kg - 66 lbs).
**2000 mm (78’’ 3/4) width available (on request) - weight 239 Kg (526 lbs).
***2000 mm (78’’ 3/4) width max; decreased width available on request..
Centre of gravity of the vehicle depending on the type of platform and the size of the installations on the vehicle (see assembly instructions). The above mentioned weights are approximate and may vary according to production.
Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
29
REP/1
APPLICATIONS
TUCKAWAY TAIL-LIFT / 1 cylinder
1500 kg - 3300 lbs
REP
load capacity:
raulic
All hyd e treated
a
ar ts r
steel p L hexacr ylic
T
K
with
horesis
-catap
electro
The REP folding tail-lifts are the ideal tail-lifts for
distribution, vehicle rental companies, for vehicles
where the maximum variable use is needed and/or
vehicles for docking work.
REP 15/1 is very light and compact.
REP 15/1 is recommended for vehicles weighing more
than 7 tons.
GENERAL INFORMATION
PLATFORM
­- Platform in aluminium alloy
MECHANICAL FUNCTIONS
-­ Assisted opening of the platform.
­- Automatic mechanical tilt of the platform to ground.
­- Manually adjustable platform angle.
­- Tail-lift with 4 piece rear bumper already factorywelded on the main assembly of the tail-lift (on
demand).
­- Rear bumper bolted to tile arms (as standard).
­- Anti-friction self-lubricating bushes and chromeplated pins.
tuckaway
lifts
HYDRAULIC CHARACTERISTICS
-­ Compact hydraulic group with security seal.
­- 1 single-acting lift cylinder with lubrication.
­- Built-in safety solenoid valves on the cylinder.
­- Tank with air filter.
­- Chrome-plated steel cylinder rods with high yield with
rubber gaiters.
­- Flow adjusters compensated on downward movements.
A
(1500 mm max)
B
TECHNICAL DATA
CONTROLS
-­ Waterproof external control box fixed to the body.
­- Control with no electronic components, illuminated for
night use.
­- Battery isolator with key.
­- Two-hand use for operator’s safety.
­- Motor with thermal safety device.
­- Motor relay with 350 A silver pin (peak
current).
E
T
D
Mod.
Load
capacity
(centre to centre
at 600 mm
23’’ 7/8)
Standard platform
dimensions
Weight *
Deep x Width
1500 Kg
(3300 lbs)
min.
max.
E
B
min.
900 mm
min.
ARM
T
1133 x 2000 mm**
310 Kg
1233 x 2000 mm**
318 Kg 430 mm 700 mm 950 mm 1150 mm 250 mm
1433 x 2000 mm**
326 Kg
(44’’ 1/2 x 78” 3/4**) (684 lbs)
REP 15/1
A
(35” 3/8)
(48’’ 1/2 x 78” 3/4**) (701 lbs) (16’’ 7/8) (27’’ 1/2) (37” 3/8) (45’’ 3/8) (9’’ 7/8)
(56” 3/8 x 78” 3/4**) (719 lbs)
1050 mm
(41” 3/8)
* weight does not include rear cross member (50 Kg - 110 lbs).
** width up to 2500 mm (98” 3/8) available on request.
*** with 1133 mm (44”1/2) platform.
30
Centre of gravity of the vehicle depending on the type of platform and the size of the installations on the vehicle (see assembly
instructions). The above mentioned weights are approximate and may vary according to production. Anteo reserves the right to
change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes
in technical specifications and/or in weight.
-­ Available with one type of arm.
­- REP 15/1: distance between centres
618 mm (24’’ 3/8).
ASSEMBLY
-­ Bolted assembly plates (on demand).
­- Plates to be welded by the assembler (on demand).
PRODUCT FINISHING
-­ Finish painted.
­- Material conform to EC standards.
­- Chrome-plated steel pins and
self-lubricating bushes.
REP/2
REP/4
TUCKAWAY TAIL-LIFT - 4 cylinders
1500 kg - 3300 lbs
2000 kg - 4400 lbs
REP
load capacity:
APPLICATIONS
TUCKAWAY TAIL-LIFT - 2 cylinders
The REP/2 and REP/4 folding tail-lifts are the ideal
tail-lifts for distribution, vehicle rental companies, for
vehicles where the maximum variable use is needed
and/or vehicles for docking work.
REP/2 and REP/4 are recommended for bodies with
flush doors, heavy duty vehicles and semitrailers.
GENERAL INFORMATION
PLATFORM
­- Platform in aluminium alloy
MECHANICAL FUNCTIONS
ar ts
steel p
raulic
cr ylic
d
y
h
e
ll
h
A
L xa
ith KT
w
d
is
te
a
hores
are tre
-catap
electro
REP/2: 2 lifting cylinders and automatic tilt
-­ Assisted opening of the platform.
­- Automatic mechanical tilt of the platform to ground.
­- Tail-lift with rear bumper bolted to the arms.
­- Anti-friction self-lubricating bushes and chromeplated pins.
HYDRAULIC CHARACTERISTICS
-­ Compact hydraulic group with security seal.
­- REP/2: 2 single-acting lift cylinders with lubrication.
­- REP/4: 2 single-acting lift cylinders + 2 single acting
tilt cylinders.
­- Built-in safety solenoid valves on the cylinder.
­- Tank with air filter.
­- Chrome-plated steel cylinder rods with high yield
steel and rubber gates.
­- Flow adjusters compensated on downward movements.
tuckaway
lifts
CONTROLS
A
(1515 mm max)
B
E
T
ARM
REP/4: 2 lifting + 2 tilting cylinders and automatic tilt
D
TECHNICAL DATA
Mod.
REP 15/2
REP 15/4
REP 20/2
REP 20/4
Load
capacity
(centre to centre
at 600 mm 23’’ 7/8)
Standard platform
dimensions
Weight *
Deep x Width
1133 x 2500 mm** 386 Kg
(44” 5/8 x 98” 3/8**) (849 lbs)
1233 x 2500 mm** 393 Kg
1500 Kg (48” 1/2 x 98” 3/8**) (865 lbs)
(3300 lbs) 1433 x 2500 mm** 405 Kg
(56” 3/8 x 98” 3/8**) (893 lbs)
1583 x 2500 mm** 420 Kg
(62” 3/8 x 98” 3/8**) (924 lbs)
1133 x 2500 mm** 427 Kg
(44” 5/8 x 98” 3/8**) (939 lbs)
1233 x 2500 mm** 433 Kg
2000 Kg (48” 1/2 x 98” 3/8**) (953 lbs)
(4400 lbs) 1433 x 2500 mm** 445 Kg
(56” 3/8 x 98” 3/8**) (981 lbs)
1583 x 2500 mm** 460 Kg
(62” 3/8 x 98” 3/8**) (1012 lbs)
A
min.
-­ Waterproof external control box fixed to the body.
­- Control with no electronic components, illuminated for
night use.
­- Battery isolator with key.
­- Two-hand use for operator’s safety.
­- Motor with thermal safety device.
­- Motor relay with 350 A silver pin (peak current).
max.
485 mm 735 mm
(19” 1/8) (28” 7/8)
485 mm 735 mm
(19” 1/8) (28” 7/8)
E
B
min.
min.
900 mm
(35” 3/8)
950 mm
(37” 3/8)
1050 mm
(41” 3/8)
1100 mm
(43” 1/4)
900 mm
(35” 3/8)
950 mm
(37” 3/8)
1050 mm
(41” 3/8)
1100 mm
(43” 1/4)
-­ Available with one type of arm.
­- REP/2 and REP/4: distance between centres 1221 mm
(48’’)
ASSEMBLY
T
­- Plates to be welded by the assembler.
PRODUCT FINISHING
-­ Finish painted.
­- Material conform to EC standards.
1166 mm 250 mm ­- Chrome-plated steel pins and
(45” 7/8) (9” 7/8)
self-lubricating bushes.
1166 mm 250 mm
(45” 7/8) (9” 7/8)
* weight for Mod. REP../2; does not include rear cross member (55 Kg - 121 lbs). Mod. REP..
/4 weight increase by 27 Kg (60 lbs).
** decrased width available on request.
*** with 1283 mm (50”1/2) platform.
Centre of gravity of the vehicle depending on the type of platform and the size of the
installations on the vehicle (see assembly instructions).
The above mentioned weights are approximate and may vary according to production.
Anteo reserves the right to change weights and technical specifications without prior
notice. No indemnity for damages can be claimed from Anteo for changes in technical
specifications and/or in weight.
31
F3 CO
COLUMN TAIL-LIFT
500 kg
1000 kg
1500 kg
2000 kg
available
not available yet
APPLICATIONS
FUTURA
load capacity:
900/1050/1200/1350
300 F3 CO 10
700/900/1100/1300
180 F3 CO 05
F3 CO 05 - lifting capacity 500 kg - is a tail-lift specially
designed for 3,5 ton vehicles.
F3 CO 10 - lifting capacity 1000 kg - is specifically recommended for vehicles weighing more than 7 tons.
Light but sturdy with columns (pillars) and platform
designed and made entirely in aluminium.
NB. In order to further reduce the weight of the F3 CO
05, the compartment where the hydraulic control unit is
situated, is entirely made of aluminium.
TECHNICAL DATA FOR STANDARD VERSIONS
F3 CO 05
F3 CO 10
MAX. WIDTH OF EQUIPMENT (W+52 mm)
WIDTH OVER COLUMNS (W)
MAX WIDTH OF EQUIPMENT (W + 28 mm)
WIDTH OVER COLUMNS (W)
270,56
GROUND-LEVEL
PLATFORM DEPTH
1088
305
BEAM HEIGHT
68 SQUARE
COLUMN CENTERS (W-68 mm)
Mod.
F3 CO 05/1
F3 CO 05/2
F3 CO 05/3
F3 CO 10/1
F3 CO 10/2
F3 CO 10/3
F3 CO 10/4
F3 CO 10/5
F3 CO 10/6
32
Load capacity
(load centre of gravity
at 600 mm)
500 Kg
1000 Kg
Width
over
columns*
2284
2134
2084
2278
2278
2438
2438
2438
2538
Width
between
columns
2148
1998
1948
2142
2142
2302
2302
2302
2402
Column
centers
2216
2066
2016
2210
2210
2370
2370
2370
2470
D
COLUMN CENTERS (W-68 mm)
D
68 SQUARE
E
E
236
BEAM
HEIGHT
900
225
PLATFORM DEPTH
COLUMN
TAIL LIFTS
Platform
depth
GROUND-LEVEL
E
D
(std. platform)
min
max
min
max
Weight
kg
900
900
900
900
900
1050
1050
1050
1050
1051
951
850
900
1001
1101
1201
1301
1301
1160
1050
950
1000
1100
1200
1300
1400
1400
350
350
350
395
395
395
395
395
395
450
450
450
495
495
495
495
495
495
130
125
120
285
285
296
297
298
305
*Width over columns minimum 1934 mm (on demand)
Centre of gravity of the vehicle depending on the platform depth and the type of the installations on the vehicle (see assembly instructions).The above mentioned weights are approximate and may vary according to production.
Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
F3 RA
APPLICATIONS
HYDRAULIC RAMPS WITH ALUMINIUM PLATFORM
2000 / 4000 / 6000 / 8000 / 10.000 / 15.000
FUTURA
load transfer capacity:
NEW
2009
The foreseen lengths of 3,600 mm and 4,000 mm allow a much
reduced tilt, thus ensuring a simplified access of operating
machines, lift trucks, motor cars and vehicles in general.
STANDARD EQUIPMENT
PLATFORM
The F3 RA is designed with aluminium profiles and a very
light structure which ensures a lifting capacity from 2,000
Kg to 15,000 Kg.
F'
MECHANICAL FUNCTIONS
- Aluminium supporting structure - Reduced weight and
increased vehicle lifting capacity.
- Aluminium ramp divided in two parts with folding and
unfolding by means of two hydraulic cylinders.
- Aluminium support feet
Z positioned between the first and
second part of the ramp.
- Control box to be placed on the vehicle side.
HYDRAULIC CHARACTERISTICS
- 12 or 24 volt electro-hydraulic control unit to be connected
V
to the vehicle battery.
MOUNTING
F- Ramp mounted on the crosspiece of the vehicle loading
platform by means of three hinges. The support has to be
welded by the fitter.
V
L
G
RAMPS
Z
F3RA 20-32
F3RA 20-36
F3RA 40-36
F3RA 40-40
F3RA 60-36
F3RA 60-40
F3RA 80-36
F3RA 80-40
F3RA 100-36
F3RA 100-40
Load Capacity
(Kg)
2000
4000
6000
8000
10000
100
F
TECHNICAL DATA
Mod.
H
V
Z
3200
1600
3600
1800
3600
1800
4000
2000
3600
1800
4000
2000
3600
1800
4000
2000
3600
1800
4000
2000
F
220
220
280
280
310
505
100
255
Weight
(Kg)
F
310
330
375
Z
395
385
405
390
410
V
400
420
33
OPTIONS
Cantilevers with PIEK Certificate
1 F3 CLP 10-15-20-30 special can-
2
tilevers 1000 to 3000kgs capacity for quiet deliveries and night time Foot control.
operations. It includes a silent power
pack, sound-deadening platform coating and automated trolley stops.
5
6
3
2 functions radio control with case.
7
4
Extra-thin control with in-cab switch
(main control for original vans).
8
Inside body remote control (spiral ca- 2 or 4 functions radio control with Vehicle battery charger for the radio Rear bumper in one piece bolted on
ble).
case.
control, with rechargeable battery.
the arm.
OPTIONS
9
34
10
Rear bumper in 3 pieces factory Automatic trolley stop (2 stops).
welded to the beam.
11
12
Automatic trolley stop (6 stops).
Lock-handle kit for locking
platform in the rest position.
the
200 mm
200 mm
13
14
15
Folding cantilever platform for drop Aluminium platform extension (for Assisted platform opening.
side body.
each 200mm).
16
Platform extension for fridge bodies.
17
18
19
20
Seals kit for closing platform to body.
Flashing lights on platform.
Mechanical stop to the body
Support for the quick assembly of the
control box.
OPTIONS
21
Safety gate.
22
22
22
Guard and side ramp (dual-purpose
type)
35
Per F3RE AM - F3RE CC
23
Guard hinged
platform.
24
and
folding
on
24
25
Structure to be fixed under the semi- Fully assembled retractable lift at
trailer body to house 2 guards and the factory.
side ramp
26
27
Removable hydraulic power pack not
integrate with the lift.
Hydraulic stabilizers (already fitted).
28
28
Acoustic and illuminated alarm system for hydraulic outriggers
OPTIONS
36
29
30
31
32
Mechanical stabilizers.
Battery protector
Tractor/trailer electrical coupling.
Colour at customer specs. upon RAL table (no charge for minimum 10 unit plus).
IVFL
F3 HD
INTERNAL TAIL-LIFT - FOLDING PLATFORM
COMPACT VERSION FOR MOTOR CARS
load capacity: 320 kg
FUTURA
APPLICATIONS
The F3HD–IVFL tail-lift has been designed for small
commercial vehicles and motor cars, especially:
CitroenBERLINGO
CitroenBERLINGO COMBI
Citroen
JUMPY
Fiat
DOBLò
Fiat
SCUDO
Ford
TOURNEO CONNECT
Ford
TRANSIT CONNECT
Mercedes Benz VITO
Opel
COMBO
Peugeot
RANCH
Peugeot EXPERT
Renault
KANGOO
Renault
TRAFIC
Volkswagen
CADDY
Volkswagen
CALIFORNIA
Volkswagen
CARAVELLE
Volkswagen
MULTIVAN
Volkswagen TRANSPORTER
• In order to avoid that sudden size changes from the
vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on
the vehicle as regards to the overall dimensions of the
tail-lift.
TECHNICAL DATA
F3HD
1150 IVFL
F3HD
1150 IVFL
SAFETY DEVICES
MAX LOAD CAPACITY
Kg
320
E
880
WEIGHT
Kg
105
B
310
- BATTERY DISCONNECT DEVICE WITH KEY MAIN
SWITCH
12 V
Amp
100
B1
350
24 V
Amp
50
- EMERGENCY MECHANICAL HAND PUMP
V
1150
UP-STROKE SPEED (FULL LOAD)
m/min
5
- TOE GUARD PROTECTION BRIDGE PLATE
H
700
DOWN-STROKE SPEED (FULL LOAD)
m/min
6
L
720
- AUTOMATIC SAFETY FLAP FOR WHEELCHAIR LOCKING AND TILTING TO THE GROUND
MAX POWER CONSUMPTION
OIL TANK CAPACITY
l
1,8
W
940
12 V
Watt
500
W1
1070
24 V
Watt
800
Z
1125
WORKING PRESSURE
bar
140
NOISE LEVEL (**)
dB
<70
ELECTRIC MOTOR POWER
access lifts for
disableD persons
- AUTOMATIC GUARD HANDLES
** Equivalent continuous (A) weighted noise pressure level, in the working place.
THE ABOVE MENTIONED COMPONENTS ARE INDICATIVE AND MAY VARY AS REGARDS TO THE PERFORMANCE. ANTEO
RESERVES THE RIGHT TO CHANGE THE WEIGHT AND THE TECHNICAL SPECIFICATIONS WITHOUT PRIOR NOTICE. NO
INDEMNITY FOR DAMAGES MAY BE CLAIMED FROM ANTEO FOR TECHNICAL SPECIFICATION AND WEIGHT CHANGES OR
FOR INSTALLATION PROBLEMS DUE TO LACK OF SPACE ON THE FOLLOWING VEHICLES.
37
IVF
F3 HD
NEW
2009
*
INTERNAL TAIL-LIFT - FOLDING PLATFORM
VERSION FOR VAN DERIVED CONVERSIONS
load capacity: 350 kg
FUTURA
APPLICATIONS
The F3HD–IVF tail-lift has been designed for van derived
vehicles, especially:
Citroen JUMPER
Citroen RELAY
Fiat
DUCATO
Ford
TOURNEO
Ford
TRANSIT
Iveco
DAILY
Mercedes Benz SPRINTER
Nissan INTERSTAR
Nissan PRIMASTAR
Opel MOVANO
Opel
VIVARO
Peugeot BOXER COMBI
Renault MASTER
Renault TRAFIC
Volkswagen CRAFTER
• In order to avoid that sudden size changes from the
vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on
the vehicle as regards to the overall dimensions of the
tail-lift.
TECHNICAL DATA
800÷900mm
1150÷1400mm
F3HD
1150 IVF
*
F3HD
900X1400 IVF
MAX LOAD CAPACITY
Kg
350
350
350
WEIGHT
Kg
145
145
155
12 V
Amp
100
100
100
24 V
Amp
50
50
50
MAX POWER CONSUMPTION
access lifts for
disableD persons
F3HD
1300 IVF
UP-STROKE SPEED (FULL LOAD)
m/min
5
5
5
DOWN-STROKE SPEED (FULL LOAD)
m/min
6
6
6
OIL TANK CAPACITY
l
1,8
1,8
1,8
12 V
Watt
500
500
500
24 V
Watt
800
800
800
WORKING PRESSURE
bar
140
140
140
NOISE LEVEL (**)
dB
<70
<70
<70
ELECTRIC MOTOR POWER
** Equivalent continuous (A) weighted noise pressure level, in the working place.
38
THE ABOVE MENTIONED COMPONENTS ARE INDICATIVE AND MAY VARY AS REGARDS TO THE PERFORMANCE. ANTEO
RESERVES THE RIGHT TO CHANGE THE WEIGHT AND THE TECHNICAL SPECIFICATIONS WITHOUT PRIOR NOTICE. NO
INDEMNITY FOR DAMAGES MAY BE CLAIMED FROM ANTEO FOR TECHNICAL SPECIFICATION AND WEIGHT CHANGES OR
FOR INSTALLATION PROBLEMS DUE TO LACK OF SPACE ON THE FOLLOWING VEHICLES.
*
F3HD
1150 IVF
F3HD
1300 IVF
F3HD
900X1400 IVF
E
920
920
920
310
B
310
310
B1
350
350
350
V
1150
1350
1400
H
700
800
800
L
800
800
900
W
1030
1030
1130
W1
1140
1140
1240
Z
1220
1220
1220
SAFETY DEVICES
- BATTERY DISCONNECT DEVICE WITH KEY MAIN
SWITCH
- EMERGENCY MECHANICAL HAND PUMP
- TOE GUARD PROTECTION BRIDGE PLATE
- AUTOMATIC SAFETY FLAP FOR WHEELCHAIR LOCKING AND TILTING TO THE GROUND
- AUTOMATIC GUARD HANDLES
VS
F3 HD
NEW
2009
INTERNAL TAIL-LIFT - VERTICAL SPLIT PLATFORM
VERSION FOR VAN DERIVED CONVERSIONS
load capacity: 350 kg
FUTURA
APPLICATIONS
The F3HD–VS tail-lift has been designed for van derived
vehicles, especially:
Citroen JUMPER
Citroen RELAY
Fiat
DUCATO
Ford
TOURNEO
Ford
TRANSIT
Iveco
DAILY
Mercedes Benz SPRINTER
Nissan INTERSTAR
Nissan PRIMASTAR
Opel MOVANO
Opel
VIVARO
Peugeot BOXER COMBI
Renault MASTER
Renault TRAFIC
Volkswagen CRAFTER
• In order to avoid that sudden size changes from the
vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on
the vehicle as regards to the overall dimensions of the
tail-lift.
TECHNICAL DATA
800 mm
F3HD VS
MAX LOAD CAPACITY
Kg
350
E
WEIGHT
Kg
145
B
310
12 V
Amp
100
B1
580
24 V
Amp
50
V
1350
MAX POWER CONSUMPTION
920
UP-STROKE SPEED (FULL LOAD)
m/min
5
H
–
DOWN-STROKE SPEED (FULL LOAD)
m/min
6
L
590
OIL TANK CAPACITY
l
1,8
W
1035
12 V
Watt
500
W1
1145
24 V
Watt
800
Z
1420
WORKING PRESSURE
bar
140
NOISE LEVEL (**)
dB
<70
ELECTRIC MOTOR POWER
SAFETY DEVICES
- BATTERY DISCONNECT DEVICE WITH KEY MAIN
SWITCH
- EMERGENCY MECHANICAL HAND PUMP
- TOE GUARD PROTECTION BRIDGE PLATE
access lifts for
disableD persons
- AUTOMATIC SAFETY FLAP FOR WHEELCHAIR LOCKING AND TILTING TO THE GROUND
- AUTOMATIC GUARD HANDLES
** Equivalent continuous (A) weighted noise pressure level, in the working place.
THE ABOVE MENTIONED COMPONENTS ARE INDICATIVE AND MAY VARY AS REGARDS TO THE PERFORMANCE. ANTEO
RESERVES THE RIGHT TO CHANGE THE WEIGHT AND THE TECHNICAL SPECIFICATIONS WITHOUT PRIOR NOTICE. NO
INDEMNITY FOR DAMAGES MAY BE CLAIMED FROM ANTEO FOR TECHNICAL SPECIFICATION AND WEIGHT CHANGES OR
FOR INSTALLATION PROBLEMS DUE TO LACK OF SPACE ON THE FOLLOWING VEHICLES.
39
VSL
F3 HD
NEW
2009
INTERNAL TAIL-LIFT LIGHT - VERTICAL SPLIT PLATFORM
VERSION FOR VAN DERIVED CONVERSIONS
load capacity: 320 kg
FUTURA
APPLICATIONS
The F3HD–VSL tail-lift has been designed for van derived
vehicles, especially:
Citroen JUMPER
Citroen RELAY
Fiat
DUCATO
Ford
TOURNEO
Ford
TRANSIT
Iveco
DAILY
Mercedes Benz SPRINTER
Nissan INTERSTAR
Nissan PRIMASTAR
Opel MOVANO
Opel
VIVARO
Peugeot BOXER COMBI
Renault MASTER
Renault TRAFIC
Volkswagen CRAFTER
• In order to avoid that sudden size changes from the
vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on
the vehicle as regards to the overall dimensions of the
tail-lift.
m
740 m
TECHNICAL DATA
Kg
320
E
WEIGHT
Kg
110
B
310
12 V
Amp
100
B1
410
24 V
Amp
50
V
1030
MAX POWER CONSUMPTION
access lifts for
disableD persons
F3HD VSL
MAX LOAD CAPACITY
880
UP-STROKE SPEED (FULL LOAD)
m/min
5
H
–
DOWN-STROKE SPEED (FULL LOAD)
m/min
6
L
510
OIL TANK CAPACITY
l
1,8
W
955
12 V
Watt
500
W1
1065
24 V
Watt
800
Z
1160
WORKING PRESSURE
bar
140
NOISE LEVEL (**)
dB
<70
ELECTRIC MOTOR POWER
** Equivalent continuous (A) weighted noise pressure level, in the working place.
40
THE ABOVE MENTIONED COMPONENTS ARE INDICATIVE AND MAY VARY AS REGARDS TO THE PERFORMANCE. ANTEO
RESERVES THE RIGHT TO CHANGE THE WEIGHT AND THE TECHNICAL SPECIFICATIONS WITHOUT PRIOR NOTICE. NO
INDEMNITY FOR DAMAGES MAY BE CLAIMED FROM ANTEO FOR TECHNICAL SPECIFICATION AND WEIGHT CHANGES OR
FOR INSTALLATION PROBLEMS DUE TO LACK OF SPACE ON THE FOLLOWING VEHICLES.
SAFETY DEVICES
- BATTERY DISCONNECT DEVICE WITH KEY MAIN
SWITCH
- EMERGENCY MECHANICAL HAND PUMP
- TOE GUARD PROTECTION BRIDGE PLATE
- AUTOMATIC SAFETY FLAP FOR WHEELCHAIR LOCKING AND TILTING TO THE GROUND
- AUTOMATIC GUARD HANDLES
IV
F3 HD
NEW
2009
*
INTERNAL TAIL-LIFT - FOLDING PLATFORM
VERSION FOR VAN DERIVED CONVERSIONS
load capacity: 350 kg
FUTURA
APPLICATIONS
The F3HD–IVF tail-lift has been designed for van derived
vehicles, especially:
Citroen JUMPER
Citroen RELAY
Fiat
DUCATO
Ford
TOURNEO
Ford
TRANSIT
Iveco
DAILY
Mercedes Benz SPRINTER
Nissan INTERSTAR
Nissan PRIMASTAR
Opel MOVANO
Opel
VIVARO
Peugeot BOXER COMBI
Renault MASTER
Renault TRAFIC
Volkswagen CRAFTER
• In order to avoid that sudden size changes from the
vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on
the vehicle as regards to the overall dimensions of the
tail-lift.
TECHNICAL DATA
*
F3HD F3HD F3HD
F3HD
1150 IV 1250 IV 1350 IV 900x1400 IV
800÷900mm
E
1150÷1400mm
*
920
920
920
920
B
310
310
310
310
B1
340
340
340
340
V
1150
1250
1350
1400
L
800
800
800
900
W
1030
1030
1030
1130
W1
1140
1140
1140
1240
Z
1220
1320
1420
1470
F3HD
F3HD
F3HD
F3HD
1150 IV 1250 IV 1350 IV 900x1400 IV
MAX LOAD CAPACITY
Kg
WEIGHT
350
350
350
350
SAFETY DEVICES
Kg
145
145
145
160
12 V
Amp
100
100
100
100
24 V
Amp
50
50
50
50
- BATTERY DISCONNECT DEVICE WITH KEY MAIN
SWITCH
UP-STROKE SPEED (FULL LOAD)
m/min
5
5
5
5
- EMERGENCY MECHANICAL HAND PUMP
DOWN-STROKE SPEED (FULL LOAD)
m/min
6
6
6
6
- TOE GUARD PROTECTION BRIDGE PLATE
l
1,8
1,8
1,8
1,8
12 V
Watt
500
500
500
500
- AUTOMATIC SAFETY FLAP FOR WHEELCHAIR
LOCKING AND TILTING TO THE GROUND
24 V
- AUTOMATIC GUARD HANDLES
MAX POWER CONSUMPTION
OIL TANK CAPACITY
ELECTRIC MOTOR POWER
Watt
800
800
800
800
WORKING PRESSURE
bar
140
140
140
140
NOISE LEVEL (**)
dB
<70
<70
<70
<70
access lifts for
disableD persons
** Equivalent continuous (A) weighted noise pressure level, in the working place.
THE ABOVE MENTIONED COMPONENTS ARE INDICATIVE AND MAY VARY AS REGARDS TO THE PERFORMANCE. ANTEO
RESERVES THE RIGHT TO CHANGE THE WEIGHT AND THE TECHNICAL SPECIFICATIONS WITHOUT PRIOR NOTICE. NO
INDEMNITY FOR DAMAGES MAY BE CLAIMED FROM ANTEO FOR TECHNICAL SPECIFICATION AND WEIGHT CHANGES OR
FOR INSTALLATION PROBLEMS DUE TO LACK OF SPACE ON THE FOLLOWING VEHICLES.
41
RE
F3 HD
UNDER CHASSIS RETRACTABLE TAIL-LIFT (electric deployment and stowage)
VERSION FOR VAN DERIVED CONVERSIONS
load capacity: 320 kg
FUTURA
APPLICATIONS
The F3HD–RE tail-lift has been designed for van derived
vehicles, especially:
Citroen JUMPER
Citroen RELAY
Fiat
DUCATO
Ford
TRANSIT
Iveco
DAILY
Mercedes Benz SPRINTER
Nissan INTERSTAR
Opel MOVANO
Peugeot BOXER
Renault MASTER
Volkswagen CRAFTER
Volkswagen T5 (it requires light modifications to the
exhaust system)
TOE PROTECTION BAR
WITH MICRO-SWITCHED
OPERATION CUT-OUT
• In order to avoid that sudden size changes from the
vehicle manufacturers do not allow the tail-lift installation, we recommend checking the available space on
the vehicle as regards to the overall dimensions of the
tail-lift.
TECHNICAL DATA
F3HD
1200 RE
Kg
320
320
WEIGHT
Kg
140
145
- BATTERY DISCONNECT DEVICE WITH KEY MAIN
SWITCH
12 V
Amp
100
100
24 V
Amp
50
50
- EMERGENCY MECHANICAL HAND PUMP
UP-STROKE SPEED (FULL LOAD)
m/min
5
5
DOWN-STROKE SPEED (FULL LOAD)
m/min
6
6
OIL TANK CAPACITY
ELECTRIC MOTOR POWER
l
1,8
1,8
12 V
Watt
500
500
24 V
800
Watt
800
WORKING PRESSURE
bar
140
140
NOISE LEVEL (**)
dB
<70
<70
** Equivalent continuous (A) weighted noise pressure level, in the working place.
42
SAFETY DEVICES
MAX LOAD CAPACITY
MAX POWER CONSUMPTION
access lifts for
disableD persons
F3HD
1100 RE
THE ABOVE MENTIONED COMPONENTS ARE INDICATIVE AND MAY VARY AS REGARDS TO THE PERFORMANCE. ANTEO
RESERVES THE RIGHT TO CHANGE THE WEIGHT AND THE TECHNICAL SPECIFICATIONS WITHOUT PRIOR NOTICE. NO
INDEMNITY FOR DAMAGES MAY BE CLAIMED FROM ANTEO FOR TECHNICAL SPECIFICATION AND WEIGHT CHANGES OR
FOR INSTALLATION PROBLEMS DUE TO LACK OF SPACE ON THE FOLLOWING VEHICLES.
- TOE PROTECTION BAR WITH MICRO-SWITCHED
OPERATION CUT-OUT
- AUTOMATIC SAFETY FLAP FOR WHEELCHAIR
LOCKING AND TILTING TO THE GROUND
VEHICLE CONVERSION OPTIONS
ST 600
SERVICE STEP WITH ELECTRIC DEPLOYMENT
AND STOWAGE
APPLICATIONS
• REDUCES THE DISTANCE BETWEEN THE VEHICLE
AND THE GROUND
• ELECTRIC DEPLOYMENT AND STOWAGE • STEP LIGHT FOR NIGHT USE
• LEVER FOR MANUAL STEP STOWAGE IN
EMERGENCY
• CABIN LED INDICATING THAT THE STEP IS IN
WORKING MODE
• VEHICLE RELATED FIXINGS FOR ASSEMBLY TIME
REDUCTION (PLEASE SPECIFY VEHICLE WHEN
OREDERING)
• ULTRA-FLAT HERMETIC HOUSING RESISTANT TO
ATMOSPHERIC AGENTS
• RECOMMENDED FOR SMALL COMMERCIAL VEHICLES
ST
600
MAX LOAD CAPACITY
Kg
WEIGHT
Kg
250
23
100
MAX POWER CONSUMPTION
12 V
Amp
ELECTRIC MOTOR POWER
12 V
Watt
500
dB
<70
NOISE LEVEL (**)
** Equivalent continuous (A) weighted noise pressure level, in the working
place.
ST 1100
ELECTRIC STEP WITH ELECTRIC ROTATION
AND TRANSLATION MOVEMENT
APPLICATIONS
• REDUCES THE DISTANCE BETWEEN THE VEHICLE
AND THE GROUND
• ELECTRIC DEPLOYMENT AND STOWAGE
(ROTATION AND TRANSLATION TYPE)
• STEP LIGHT FOR NIGHT USE
• LEVER FOR MANUAL STEP STOWAGE IN
EMERGENCY
• CABIN LED INDICATING THAT THE STEP IS IN
WORKING MODE
• VEHICLE RELATED FIXINGS FOR ASSEMBLY TIME
REDUCTION (PLEASE SPECIFY VEHICLE WHEN
OREDERING)
ST
1100
MAX LOAD CAPACITY
Kg
WEIGHT
Kg
300
25
100
MAX POWER CONSUMPTION
12 V
Amp
ELECTRIC MOTOR POWER
12 V
Watt
500
dB
<70
NOISE LEVEL (**)
** Equivalent continuous (A) weighted noise pressure level, in the working place.
access lifts for
disableD persons
43
STANDARD FEATURES AND SAFETY DEVICES
1
•INTERNAL CONTROL WITH SPIRAL
CABLE
•BATTERY DISCONNECT DEVICE
WITH KEY MAIN SWITCH
2
•EMERGENCY MECHANICAL HAND
PUMP
•TOE GUARD PROTECTION BRIDGE
PLATE
•AUTOMATIC SAFETY FLAP FOR
WHEELCHAIR LOCKING AND TILTING TO THE GROUND
3
•AUTOMATIC GUARD HANDLES
VEHICLE CONVERSION OPTIONS
4
INTERNAL CONTROL WITH CABLE
5
RADIO CONTROL
7
BELT KIT WITH RETRACTOR
Belt kit with retractor fitted with pretensioner to restrain the disabled person on
the wheelchair and/or the seat
6
FLICKER SWITCH FOR RAISING
AND LOWERING LIFT PLATFORM
8
4-POINT BELT KIT WITH SNAP
HOOK
4-POINT BELT KIT WITH SNAP
HOOK (version with belt ring coupling)
4-point belt kit with snap hook to anchor
the wheelchair on tracks, both external
and built-in. Over-centre buckle to adjust restraint
9
access lifts for
disableD persons
10
BELT KIT FOR
WHEELCHAIR
Sitec 4 point retractable wheelchair system with
fully integrated occupant restraint.
44
11
Plug and play door opener
for vehicle
12
INSET TRACKING
Inset tracking kit with 3.65 m bars and
fitted with 8 terminals
a n niv e rs
a
I.P.
eo
ry
1
a
nt
9 • 200
9
96
dal 1969
anteo spa - via Nobili, 68/70 - 40062 Molinella (BO) Italia - tel +39 0516906611 - fax +39 0516906604 - www.anteo.com - anteo@anteo.com
Download PDF
Similar pages