Professional cold- and hot-water high-pressure cleaners
www.dynajet-online.com
DYNAJET 500 th and 800 th
The powerful all-rounders
The pictures show the DYNAJET 500 th
Unbeatable mobility and versatility thanks to the single-axle principle
when combined with the optimum setup of water pressure, water quantity
and perfect hot-water temperature.
 Independent hot-water high-pressure cleaners for flexible use at any
location.
 Due to its water tank and fixed hose drum, the DYNAJET 500 th is ready for
immediate use.
 The wear-resistant pressure adjustment is infinitely variable, so that the
cleaning performance can be ideally adapted to the cleaning object.
Technical data
Type
Max. operating pressure
Max. flow rate
Pump
Engine (oil cooled)
Speed of engine/ pump
Fuel consumption ø
Heating power of 2 oil burners (effective)
Consumption of the two oil burners
Water-tank capacity
Fuel/ heating-oil tank capacity
Discharge coupling
Chassis
Weight (without water)
LxWxH
Part no.
30
DYNAJET 500 th
DYNAJET 800 th
hot and cold-water
hot and cold-water
500 bar (7,250 PSI)
800 bar (11,600 PSI)
15-30 l/ min (3.97-7.94 US gal/ h)
10-21 l/ min (2.65-5.56 US gal/ h)
triplex plunger pump with ceramic-coated pistons
Deutz three-cylinder diesel/ 34 kW (46.2 HP)
2,600/ 1,000 rpm
2,300/ 800 rpm
10 l/ h (2.65 USgal/ h) at full load
10 l/ h (2.65 USgal/ h) at full load
2x 91 kW (125 Hp)
2x 65 kW (90 Hp)
total approx. 7 l/ h (1.85 USgal/ h) (at 60% operative)
1,000 l (264.55 USgal)
70 l/ 105 l (18.52 USgal/ 27.78 USgal)
M24 x 1.5 IT
M24 x 1.5 DKO ET
single axle trailer with brake
1,600 kg
1,640 kg
365 x 210 x 210 cm
365 x 210 x 210 cm
1 490.020
1 529.010
Professional cold- and hot-water high-pressure cleaners
Standard scope of supply*
Scope of supply
2x high performance water burners, powerful diesel engine, 12 V socket,
high-pressure hose* and 25 m low-pressure supply hose with hose drum,
safety valve, automatic hose pressure drop down-system, 1,000 l
(264.55 USgal) water tank, lifting eye, operating manual. DYNAJET 800 th also
come with automatic frost protection and decalcification system.
High-pressure cleaning gun with
extension pipe (total length approx.
800 mm), nozzle carrier and 15°
flat-jet nozzle, storage box
* The 500 th type is equipped with a 50 m high-pressure hose on a fixed hose drum.
The 800 th type is equipped with 2x 10 m high-pressure hoses on loose storage drums
and 20 m remote control cable on a loose drum.
Special versions
 DYNAJET 500 t
Available as a cold-water machine without hot-water
burner in the following technical versions:
500 bar (7,250 PSI)/ 30 l/ min
400 bar (5,800 PSI)/ 37 l/ min
 Built-in module for the DYNAJET 500 sh/ 800 sh
Identical technical data to DYNAJET 500 th and 800 th,
but without chassis, mounted on an installation frame with
forklift slots for internal transport and/ or installation and
assembly, with 2 cover hoods,
weight 1.420 kg (500 sh) resp. 1.460 kg (800 sh)
L x W x H (closed): 220 x 147 x 177 cm
L x W x H (open): 307 x 147 x 246 cm
DYNAJET 500 sh
DYNAJET 800 sh
Part no.
On request
1 490.040
Accessory sets
Part no.
 Decalcification unit (for 500 th/sh)
 12 V working headlight complete with
 1 set of spark arrestors (for 500 th/ 800 th) or the diesel engine




Part no.
Specifications as the 500 th but with following additional scope:
spark arrester for engine and burner, battery disconnecting
switch, connection socket for external remote emergency
shutdown
1 490.070
 DYNAJET 800 th wireless
Specifications are identical to 800 th, but without remote
control cable to gun, without cable reel and without automatic
speed-pressure control. Manual speed adjustment via manual
throttle analogous to 500 th. Without integrated anti-freeze
and decalcification system.
1 529.080
1 490.030
1 529.030
Special equipment
approx. 2 m spiral cable and magnetic foot
 DYNAJET 500 th – Special
438 165
437 116
and for both hot-water burners, complete with connection parts
439 998
500 th
490 172
800 th
Connection hose (for 500 th)
for high-pressure hoses with straight couplings
to the drum, length 0.5 m, connections 3⁄8”
BSP 90/ M24 x 1.5 ET
459 593
Cover for operator‘s side for 500 sh/ th/ t
made of aluminium, complete with storage box made
of stainless steel and vice
518 729
External emergency stop button with cable drum
50 m cable, additional accessories only fit with 500 th –
Special (Part no. 111 490.070)
458 018
Electronic throttle control
Automatic electronic speed adjustment governed by
operation of the spray gun.
On request
 Rotating nozzle system
– Extension pipe
– Hose connections
– Rotating nozzle
Part no.
459 344
500 th
531 125
800 th
 Water/ sand-blasting system
WSS 500
– Extension pipe
– Hose connections
– Spray head incl. nozzle
– Suction hose
with suction pipe
Part no.
500 th
459 350
 Water/ sand-blasting system
WSS 1000
– Extension pipe
– Hose connections
– Spray head incl. nozzle
– Suction hose with suction pipe
Part no.
All sets are supplied as single parts including sealing paste (heat-resistant). Further
accessories and personal protective equipment can be found from page 48 onwards.
500 th
800 th
459 351
487 234
31
Download PDF
Similar pages