2018 outlander phev

2018 OUTLANDER PHEV
OWNER’S HANDBOOK
PLEASE PLACE COPIES OF THE FOLLOWING ITEMS IN THE POCKET BELOW:
1. Pre-Delivery Inspection Form (Customer Copy)
2. Triple Diamond Delivery Checklist (Customer Copy)
3. Salesperson or Key Dealership Contact’s Business Card
1
TABLE OF CONTENTS
Thank you for buying a Mitsubishi Outlander PHEV. There’s no doubt you’ve already realized how well your
car drives on the open road. What you may not know is all the great features that help your car perform
the way it does. In the pages ahead we’re going to run through the basics and prepare you for the road.
We hope you will visit the Mitsubishi Owner’s site where we store the latest Mitsubishi news
and special offers. Here you can also keep track of your car’s warranty and servicing needs,
get Roadside Assistance Information and tap into other owner-centric details. Just log on to
WWW.MITSUBISHICARS.COM/OWNERSONLY.
Some of the information contained in this booklet may not be correct due to product changes which may have occurred after the time it was
published. Mitsubishi Motors North America, Inc. reserves the right to make changes at any time, without notice, to prices, color, materials,
specification and models.
Driver’s View . . . . . . . . . . . . . . . . . Page 2
Charging . . . . . . . . . . . . . . . . . . . . Page 4
Shift Lever and
Console Design. . . . . . . . . . . . . . . Page 7
Controls. . . . . . . . . . . . . . . . . . . . . Page 8
Own the Road. . . . . . . . . . . . . . . . Page 10
Switches. . . . . . . . . . . . . . . . . . . Page 11
Advanced Technology. . . . . . . . . . Page 12
Folding the Second Row Seats. . . Page 14
Operations. . . . . . . . . . . . . . . . . . Page 15
HomeLink®. . . . . . . . . . . . . . . . . . Page 16
PHEV Display Features. . . . . . . . . Page 17
Mitsubishi Remote Control. . . . . . Page 18
Smartphone Link
Display Audio (SDA). . . . . . . . . . . Page 19
Bluetooth® Operation. . . . . . . . . . Page 21
Comfort and Convenience . . . . . . Page 22
Multi-Information Display . . . . . . Page 23
FAQ’s. . . . . . . . . . . . . . . . . . . . . . Page 24
2
DRIVER’S VIEW
1
ECO Mode Switch. . . . . . . . . . . . . . . . . . . Page 6
2
Climate Controls . . . . . . . . . . . . . . . . . . . Page 8
3
Headlights. . . . . . . . . . . . . . . . . . . . . . . . Page 8
4
De-Icer Controls. . . . . . . . . . . . . . . . . . . . Page 8
5
Side Mirror Adjustment . . . . . . . . . . . . . . Page 9
6
Windshield Wiper Lever . . . . . . . . . . . . . . Page 9
18
Cruise Control / Adaptive Cruise
Control (if equipped). . . . . . . . . . . . . . . Page 10
7
8
Drive Mode Selector. . . . . . . . . . . . . . . . Page 10
9
Paddle Shifters . . . . . . . . . . . . . . . . . . . Page 10
3
9
13
10 Lane Departure Warning (LDW) Switch
and Forward Collision Mitigation (FCM)
Switch (if equipped). . . . . . . . . . . . . . . . Page 11
11 Power Switch. . . . . . . . . . . . . . . . . . . . .
12 HomeLink
Page 15
10
. . . . . . . . . . . . . . . . . . . . . . . Page 16
®
13 Audio Remote Control Switch. . . . . . . . .
Page 19
14 Smartphone Link
Display Audio (SDA). . . . . . . . . . . . . . . . Page 19
15 Bluetooth® Operations. . . . . . . . . . . . . .
Page 21
16 Seat Heater Switch. . . . . . . . . . . . . . . . .
Page 22
17 Power Liftgate Main Switch. . . . . . . . . .
Page 22
18 Multi-Information Display (MID). . . . . . .
Page 23
5
15
11
7
6
3
12
14
8
1
2
4
16
17
4
CHARGING
CHARGING OPTIONS
Level 1
Level 2
240V
DC Fast
Charging
Approximately
8 hours to full charge
(12 Amps)
Approximately
3.5 hours to
full charge
Approximately
25 minutes to
full charge
120V
CHARGING LID
A - Level 1 & Level 2 Port
LEVEL 1 CHARGING
Vehicle will come equipped with a Level 1 Charging cable stored in the
rear cargo area.
Two AMP options are available on the Control Box:
• 8 AMP - default setting, approximately 13 hours to
complete charge
• 12 AMP - Approximately 8 hours to complete charge
TO USE:
• First plug cable into outlet
• Choose AMP amount
• Plug cable into left charging port
String
B - DC Fast Charging
A
B
OPENING THE CHARGING LID
1. Firmly apply the parking brake, press the Electrical Parking switch to
the "P" position and put the operation mode of the Power switch in OFF.
2. Unlock the driver's door to unlock the charging lid.
3. Push the rear portion of the charging lid until it clicks, and open the
charging lid.
4. Unlatch the desired charging port.
When charging is complete, close charging port and charging lid.
When vehicle is locked, charging lid will remain locked.
Control Box
What is this String? The vehicle also comes equipped with a bag labeled
"String" located in the same compartment as the Level 1 charging
cable. The string can be used to suspend the control box during
charging.
*Mitsubishi Motors North America recommends home charging units be installed by a certified
electrician to ensure proper wiring and safe charging.
CHARGING 5
CHARGE POINT CHARGING CARD
ChargePoint has provided Mitsubishi-branded charging cards to Outlander PHEV owners in an effort to deliver a more convenient charging experience!
• Every Outlander PHEV will come with a Driver Kit containing a Radio Frequency ID (RFID) card in the glovebox
• Activate by visiting chargepoint.com/activate (credit card required for activation)
• Can use any ChargePoint Level 2 or DC Fast Charging unit
• ChargePoint App is free and can be used to locate stations and check pricing
Level 1
(Home)
Level 2
DC Fast Charging
Driver Kit and RFID card
6
CHARGING MODES
BATTERY CHARGE MODE
BATTERY SAVE MODE
Pressing the CHRG switch will turn on the engine to begin charging the
drive battery.When the vehicle reaches close to fully charged, Battery
Charge Mode will remain on to main charge.
Pressing the SAVE switch will preserve the battery at the current level.
Depending on driving conditions, engine may turn on.
ECO MODE
EV PRIORITY MODE
Pressing the ECO MODE switch makes air conditioner more
energy-efficient and moderates acceleration to improve fuel efficiency.
Pressing the EV PRIORITY switch prioritizes the EV mode UNLESS:
•Speed exceeds approximately 75 MPH
•Defroster or Cruise Control are on
•Less than 1 segment on SOC gauge remains
•Battery Charge or Battery Save mode is on
SHIFT LEVER AND CONSOLE DESIGN 7
SHIFT LEVER AND CONSOLE DESIGN
A
C
-Push Button Park (behind lever)
-Twin Motor 4WD Lock
-Battery Charge Switch
-Moving the shifter to the right
(B- mode)
-Battery Save Switch
-EV Priority Mode
-Electric Parking Brake
H -Auto Hold Switch
D
E
B
G
F
H
Pressing the PARK switch A with your foot on the brake will
place the vehicle in Park.
To change S-AWC mode, press the TWIN MOTOR 4WD LOCK B .
This will put the vehicle into NORMAL or AWD LOCK mode.
Either mode can be driven on any surface at any speed.
Pressing the Charge switch C , engages the engine which in
turn, will charge the battery.
The PHEV has a unique shift pattern D that includes Brake
Regeneration. Moving the shifter to the right (B - Mode)
and pressing down can move brake regeneration to either
regeneration level 3 or 5.
Pressing the SAVE switch E will preserve the battery charge
by periodically engaging the engine as needed.
Pressing the EV Priority MODE switch F helps to keep the
vehicle in the electric mode. See the Owner's Manual for
instances where it will not stay in the EV mode.
The Electric Parking Brake G can be engaged by lifting the
Parking button and disengaged by pressing the parking
switch. The Auto Hold switch H will help to keep the vehicle
in a stopped position when coming to a stop. The brake will
release when the accelerator is pressed.
8
CONTROLS
REGULAR HEADLIGHTS
AUTOMATIC HEADLIGHTS
Headlights and other lights on.
Parking, tail, front and rear sidemarker lights, license plate
and instrument panel lights on.
Headlights and other lights turn on and off automatically in
accordance with outside light level.
All lights off.
DUAL-ZONE AUTOMATIC CLIMATE CONTROLS
A -
A
A
B
C
D
E
F
G
H
Push to select the desired temperature
B - Push to select outside air (Indicator light off) or recirculated air
(Indicator light on)
C - Push for air conditioning ON/OFF
D - Push to select the blower speed
E - Push to select the position of air flowing from the vents
F - Push to defog windshield
G - When the AUTO switch is pushed, the settings are automatically
controlled. Passenger’s side temperature will be changed to the same
temperature set as the driver’s side
H - Push to defrost the rear windows and to activate the De-Icer Controls
CONTROLS 9
WINDSHIELD WIPERS
A
The wipers will operate once.
INT: Intermittent intervals can be adjusted
by turning the knob .
SIDE MIRROR ADJUSTMENT
The outside rearview mirrors can
A
be adjusted when the Power switch
is in the “ON” or “ACC” position.
Move the lever A to the same side
as the mirror you wish to adjust.
AUTO: The wipers will be operated
automatically by rain sensor (if equipped).
Slow
POWER FOLDING SIDE MIRROR SWITCH (IF EQUIPPED)
Press switch to fold in mirrors (if
needed) within 30 seconds of the
Power switch being off or in the
"ON" or "ACC" position.
Fast
REAR WINDOW WIPER/WASHER
Turn the knob
window wiper.
to operate the rear
The wiper operates continuously for several
seconds then operates intermittently at
intervals of about 8 seconds.
Washer fluid is sprayed, the wiper will
automatically operate 2 or 3 times.
POWER FOLDING SIDE MIRRORS
The mirrors will
automatically fold
in when the vehicle
is turned off and
placed in Park under
the following two
conditions:
1.The FAST-key button located on the door handle is
pressed to lock the doors.
2.The Lock button on the remote control is pressed.
10
OWN THE ROAD
PADDLE SHIFTERS AND BRAKE REGENERATION
By pressing the paddle shifter up on
the right side you have reduced brake
regeneration and increase coasting. By
pressing up on the left side, you increase
brake regeneration.
You can return to the “D” operation by
pulling the + (SHIFT UP) side paddle
shifter rearwards (toward the driver) and
holding for over 2 seconds.
DRIVE MODE SELECTOR
The drive mode can be switched by
pressing the drive mode selector while
the Power switch is in the ON position.
Pressing the switch will change the drive
mode from NORMAL to 4WD LOCK.
CRUISE CONTROL / ADAPTIVE CRUISE CONTROL (IF EQUIPPED)
A -CANCEL: To deactivate the ACC or
cruise control.
A
B -RES + : To increase the set speed
or resume control after cancelling
B
the ACC or cruise control function.
C -SET – : To set the desired speed
C
and to reduce the set speed.
D
-ON/OFF:
To turn cruise control ON
D
or OFF.
E -ACC DISTANCE SWITCH: Used
to set or change the following
E
distance between your vehicle and
the vehicle in front of you.
TO SET A CRUISING SPEED
1.Press D and the “ACC” (if equipped) or “CRUISE” indicators will
appear in the Multi-information Display.
2. Accelerate or decelerate to your desired speed (above 25 mph). Press
C and remove your foot from the accelerator pedal.
TO ACCELERATE OR DECELERATE SPEED
Push up B to increase set cruising speed.
Push down C to decrease set cruising speed.
TO CANCEL THE CRUISING SPEED
Press A or press the brake pedal, or press D .
SWITCHES 11
ACTIVE STABILITY CONTROL (ASC) OFF SWITCH
You can deactivate the system by pressing
down the “ASC OFF” switch for 3 seconds
or longer. When the ASC is deactivated, the
display/indicator will turn on.
To reactivate the ASC, momentarily press the
“ASC OFF” switch; the display/indicator is
turned off.
FORWARD COLLISION MITIGATION (FCM) SWITCH (IF EQUIPPED)
Every time the operation mode is turned to
“ON”, the FCM will automatically be
turned on.
To turn off the FCM, press and hold the FCM
switch located on the left side of the steering
column. The “FCM OFF” message and
indicator will appear in the Multi-information
Display.
To change the warning distance mode, briefly
press the FCM switch.
The Forward Collision Mitigation (FCM) system is a driver aid only and is not a
substitute for safe and careful driving. Under certain circumstances, the system
may not detect other vehicles and/or pedestrians correctly.
LANE DEPARTURE WARNING (LDW) SWITCH (IF EQUIPPED)
When you press the LDW switch located
on the left side of the steering column, the
“LDW” indicator on the information screen of
the Multi-information Display turns OFF and
the LDW system is inactive.
Press the switch again, the system
will activate.
FUEL TANK FILLER DOOR OPENER SWITCH
PLEASE WAIT
NOW OPENING
Due to the sealed fuel tank, pressure may build within the tank in high
altitudes, high temperatures, or if it has not been used in some time.
After pressing the fuel release switch, the fuel tank will automatically
reduce pressure as needed before opening the tank. This may take
a couple of seconds or up to a minute, and a message will display.
12
ADVANCED TECHNOLOGY
BLIND SPOT WARNING WITH LANE CHANGE ASSIST (BSW)
The Blind Spot Warning (BSW) is a driving aid system that alerts the
driver when another vehicle which may not be visible through the outside
rearview mirror is traveling in the next lane behind your vehicle. When
a vehicle in the next lane is traveling at same speed or faster in the
detection areas, the Blind Spot Warning light in the corresponding outside
rearview mirror will illuminate. If the turn signal lever is operated to the
side where the Blind Spot Warning light is illuminated, the Blind Spot
Warning light will blink and a buzzer will sound to alert the driver.
Depending on the speed of your vehicle, the Blind Spot Warning will detect
up to approximately 230 feet from your vehicle.
REAR CROSS TRAFFIC ALERT (RCTA)
The Rear Cross Traffic Alert (RCTA) is an aid system for backing up. When
the RCTA detects vehicles approaching from sides while your vehicle is
reversing, the Blind Spot Warning lights in the outside rearview mirrors on
both sides will blink and a buzzer will sound to alert the driver. A warning
message will also appear on the information screen of the
Multi-information Display.
Rear Cross Traffic Alert will be activated from 0 MPH when the vehicle is
shifted into Reverse and will detect on-coming vehicles that are passing
behind you. (Note: Minimum speed required for passing vehicles. See
Owner’s Manual for details). Rear radar transceivers will detect on-coming
rear traffic and will light up in the mirror and in the Multi-information
Display as well as sound a warning alert.
The Blind Spot Warning, Lane Change Assist and Rear Cross Traffic Alert systems are driver aids only
and are not substitutes for safe and careful driving. Under certain circumstances, these systems may
not detect other vehicles correctly.
ADVANCED TECHNOLOGY 13
AUTOMATIC HIGH BEAM HEADLIGHTS (AHB) (IF EQUIPPED)
MULTI-VIEW CAMERA SYSTEM
Press the button on the end of the left stock while turning on the head lamp to
turn on the Auto High Beam (AHB) operation. When an oncoming vehicle or/and
preceding vehicle approaches, AHB switches high-beam to low-beam until that
vehicle is clear of the vehicle’s detection area and switches back to high-beam
once the detection area is clear.
Press the rectangular icon
next to the SOURCE button
on the steering wheel to engage the camera at speeds up to
approximately 5 MPH. The camera will automatically engage
when the vehicle is shifted into reverse. Cameras placed at four
positions around the vehicle provide visibility that would normally
not be seen. The Audio Display will show two images of the
vehicle's immediate surroundings.
14
FOLDING THE SECOND ROW SEATS
FOLDING THE SECOND ROW SEATS
1.When folding the left side second row seat, store the seat belt
for the middle seating position of the second row seat. Refer to
“Detachable center seat belt for second row” in your Owner’s
Manual for help.
2.Lower the head restraint for
second row middle seating
position to its lowest position.
3.Pull the strap (A) and tilt forward
the head restraints for second
row outside seating position.
4.Pull the strap (B) to flip the seat
cushion forward.
5.Fold forward the seat belt buckle.
6.Pull up the
lever (D),
then fold the
seatback
forward.
CAUTION: Do not allow any person to sit on the flipped seat cushion,
and do not place luggage on it. The seat’s mounting fittings could
bend under the weight, making it impossible for the seat cushion to
be secured when it returns to the original position.
UNFOLDING THE SECOND ROW SEATS
1. Raise the seatback until it locks securely
into place.
2. While lifting the seat belt buckle (A), gently
lower the seat cushion. Make sure that there
is a hook (B) at the position shown in
the illustration.
3. Push down the seat cushion until it locks
securely into place.
4. Make sure that all seat belt buckles are
properly positioned on the seat cushion.
5. If the center seat belt is stored:
•Pull out the detachable anchor plate (D)
from the seatback.
•Pull the small latch plate (E) slowly and
insert it into the detachable anchor plate
until a click is heard.
•Make sure that the seat belt is not
twisted.
OPERATIONS 15
KEYLESS ENTRY SYSTEM
1.LOCK ( ) button
2.UNLOCK ( ) button
3.Power liftgate button
(if equipped)
4.PANIC button
5. Operation indicator light
6. Charging Timer Cancel switch
(if equipped)
While carrying the FAST-key, press the
driver’s door lock/unlock switch .
IF THE FAST-KEY IS NOT OPERATING PROPERLY
Remove the key from the
FAST-key remote and unlock the
door manually. Then, insert the
FAST-key into the key slot in the
floor console. Starting the vehicle
and changing the operation
mode should now be possible.
Remove the FAST-key from the key slot after starting the vehicle
or changing the operation mode.
POWER SWITCH
While carrying the FAST-key within the operating range, the
POWER switch can be used to start the drive battery.
TO START THE HYBRID EV SYSTEM:
POWER
1.Make sure that charging cable is disconnected
2.Push POWER switch while pressing firmly on the brake pedal
3.Once the READY light illuminates, the vehicle is ready
for operation
4.System will not be activated if the Select Lever is operated while the "READY"
light is flashing
TO STOP HYBRID EV SYSTEM:
1.Park vehicle in safe place
2.Push the Electric Parking Brake switch
3.Push the Push Button Park switch
4.Push the POWER switch
EMERGENCY ENGINE STOP PROCEDURES:
If you have to bring the engine to an emergency stop while driving, press and hold the
POWER SWITCH for 3 seconds or more, or press it quickly 3 times or more.
16
HOMELINK®
PROGRAMMING A NEW HOMELINK®
To program HomeLink® to operate a garage door, gate, or entry door opener, home or office lighting, you need to be
at the same location as the device.
1. Press the HomeLink® button that you would like to program. The indicator light (A) will flash orange slowly.
2. Position the end of your hand-held transmitter (B) 1 to 3 inches away from the HomeLink® button while keeping
the indicator light in view.
3. Press and hold the hand-held transmitter button while watching the indicator light (A). Continue pressing the
button until the indicator light (A) changes from slowly flashing orange to either rapidly flashing green (rolling
code) or continuously lit green (fixed code). Now you may release the hand-held transmitter button.
4. Press the just-trained HomeLink® button and observe the indicator light.
•If the indicator light stays on constantly green, programming is complete and your device should operate
when the HomeLink® button is pressed and released.
•If the indicator light rapidly flashes green, firmly press, hold for 2 seconds and release the programmed
HomeLink® button. Repeat the “press/hold/release” sequence a second time, and, depending on the brand
of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to
complete the programming process. At this point if your device operates, programming is complete.
•If the device does not operate, continue with “Programming a new HomeLink®” steps 5 to 7 to complete the
programming of a rolling code equipped device.
5. At the garage door opener receiver (motor-head unit) in the garage, locate the “Learn” or “Smart” button. This
can usually be found where the hanging antenna wire is attached to the motor-head unit (see your garage door
opener manual to identify the “Learn” button).
6. Firmly press and release the “Learn” or “Smart” button. (The name and color of the button may vary by
manufacturer.) There are typically 30 seconds to initiate step 7.
7. Return to the vehicle and firmly press, hold for 2 seconds and release the programmed HomeLink® button.
Repeat the “press/hold/release” sequence a second time, and, depending on the brand of the garage door
opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming
process. HomeLink® should now activate your rolling code equipped device.
NOTE: Some hand-held transmitters may actually train better a distance of 6 to 12 inches. Keep this in mind if you
have difficulty with the programming process.
1 - HomeLink® button 1
2 - HomeLink® button 2
3 - HomeLink® button 3
PHEV DISPLAY FEATURES 17
SMARTPHONE LINK DISPLAY AUDIO (SDA)
A
B
SDA ENERGY INFORMATION DISPLAY
C
D
A - Vehicle Info
Changes SDA Energy Information Display
B - Timed Air Conditioning
Set timer for AC, Heat, or Defroster
C - Timed Charging
Set specific charging times for potential rate savings
D - Charging Cost
Enter cost of charge to review spending
See Owner's Manual for additional details and operation.
Displays real-time Drive Mode (EV, Series, Parallel), EV Range and
Total Range
Displays drive range, total range and AC power consumption
Displays amount of EV driving, ECO score, remaining range, and
EV & Fuel averages
18
MITSUBISHI REMOTE CONTROL
MITSUBISHI REMOTE CONTROL
A
HOME SCREEN:
• Displays charge amount
• Scheduled charging displayed
• Scheduled climate
control displayed
Press button on side
of FAST-key to begin
charging immediately
SET CHARGE AND CLIMATE CONTROL:
• Can save up to 5 charge
schedules and 5 climate control
schedules
• Pre-cool, Pre-heat, or defrost vehicle
• Climate controls can be set to
Max AC or Max Heat only
• Defrost - front and rear
STATUS:
• Displays door and light status
• Displays Main Power On or Off
OPERATIONS:
• Turn on Headlights or
Parking Lights
• Select icon, then slide to activate
• Once on, slide again to deactivate
SETTINGS (A):
• Update Passcode, change
SSID (wifi) name, cancel VIN
registration, and review theft
alarm history
Note: Demo Mode Displayed
SMARTPHONE LINK DISPLAY AUDIO (SDA) 19
SMARTPHONE LINK DISPLAY AUDIO (SDA)
C
B
D
E
A
F
A -Power and Volume Knob
D -Apps
B -Touch Screen Display
E -Audio
C -Home (return to initial display)
F -Menu
SETTING THE CLOCK
The clock adjustment procedure is as follows:
1.Touch the HOME key
2.Touch SETTING, then CLOCK
The display changes to the clock setting where time and format can
be adjusted.
3.Touch SET
4.To return to the settings, touch BACK
5.The time setting change is completed
ACCESSING AM OR FM STATIONS
Make sure you are on the Home Screen and touch either FM or the
AM button.
TO SET A STATION IN MEMORY
1.Once the station you want to save is shown on the screen, touch and
hold the preset boxes, numbered 1 through 6, on the touch screen until
you hear a beep.
2.Once you hear a beep, the station will be saved to memory.
USB INPUT
1.Park your vehicle in a safe place
and press the Power switch off.
2.Plug in the USB connecting cable
that is supplied with your device
and connect the USB end into the
input terminal located in the floor
console box.
3.Press the Power switch to ON or to
the "ACC" mode. Turn on the audio system.
4.Touch AUDIO to switch to the USB mode.
5.Depending on your USB device, it may take longer for playback to start.
6.Once the device is selected, playback starts.
AUDIO REMOTE CONTROL SWITCH
SOURCE
Change the audio source
VOLUME UP/DOWN
SEEK
Change station or track
20
SMARTPHONE LINK DISPLAY AUDIO (SDA)
ACCESSING APPLE CARPLAY™
1.Make sure your iPhone® has iOS7.1 or later and that you are using a genuine Apple Lightning® to USB cable.
2.Connect the Apple Lightning® to USB cable to your phone and to the vehicle's USB port in the center console
3.Apple CarPlay will automatically connect. To use the iPhone with Apple CarPlay even while locked, choose
"Allow" on your iPhone's screen after the first connection.
4. You can now operate Siri by pressing and holding the Steering Wheel Audio Speech button until prompted on
the screen.
ACCESSING ANDROID AUTO™
1.You must download the Android Auto app from the Google Play Store. This process may take up to a couple
of minutes.
2.Connect the manufacturer's phone cable from your phone into the vehicle's USB port located in the center console.
3.Follow your phone’s on-screen instructions until you are connected to Android Auto. You can press the Speech
button on the Steering Wheel Audio Controls to activate voice operation.
HD RADIO SUB-CHANNELS
1.To select the HD Radio Sub-Channels, touch the display audio HD Radio Sub-Channel selection (example 1, 2, 3,
4 shown).
2.The HD Radio Sub-Channel numbers will appear in a drop down menu. Select the designated HD Sub-Channel.
Apple CarPlay, iPhone, Siri and Lightning are trademarks of Apple Inc., registered in the U.S. and other Countries. Android, Android Auto, Google Play and other marks are trademarks of Google Inc.
BLUETOOTH® OPERATION 21
BLUETOOTH® CONTROLS
For a list of compatible Bluetooth® devices, please go to
http://www.mitsubishicars.com/owners
A
A - SPEECH BUTTON
Change to voice recognition
B
B - PICK-UP BUTTON
Answer an incoming call
C - HANG-UP BUTTON
C
End a call or voice recognition
BLUETOOTH® PAIRING
1.Press the HOME key
2.Touch SETTINGS, then scroll using << or >> to the Bluetooth Settings tab
3.On the Bluetooth Settings Screen, touch PAIR DEVICE
4.Activate the Bluetooth function on your device, then press Next.
5.Select "Mitsubishi Motors Bluetooth" on your device and confirm request
NOTE: If a passkey is required, enter the passkey displayed on the screen
6.Registration is complete when the Bluetooth settings screen is displayed.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
TO MAKE A CALL
There are 3 ways to make a call: by saying a telephone number, by using the
Bluetooth 2.0 interface's phonebook, and by redialing a telephone number.
SAYING A TELEPHONE NUMBER
1.Press the Speech button.
2.Say "Dial."
3.After the voice guide says "Number please," say the telephone number.
4.The voice guide will say "Dialing <number recognized>." The
Bluetooth 2.0 interface will then make the call. When the confirmation
function is on, the system will confirm the telephone number again.
To continue with that number, answer "Yes." To change the telephone
number, answer "No." The system will say "Number please." then say
the telephone number again.
MAKING A CALL USING A PHONEBOOK NUMBER
1.Press the SPEECH button.
2.Say "Call" (Note: You must have names stored in the Phonebook or the
voice guide will say "The vehicle phonebook is empty. Would you like to
add a new entry now?")
3.After the voice guide says, "Name please." Say the name you want to
call from those registered in the Phonebook. If there is only 1 match,
the system voice guide will say "Calling <name>" and will dial the
telephone number. If there are 2 or more matches, the voice guide will
say "More than one match was found, would you like to call
<repeats name> ." If that person is the one you want to call, answer
"Yes." If it is not the person, answer "No." The name of the next
matching person will be mentioned by the voice guide.
REDIALING
Press the SPEECH button. Say "Redial." The last phone number dialed from
the system will be redialed.
22
COMFORT AND CONVENIENCE
ELECTRICAL PARKING BRAKE
Pull up on switch to engage the
parking brake.
The Auto Hold feature is used
to hold the vehicle stationary by
pressing the momentary-contact
AUTO HOLD switch prior to releasing
the brake pedal.
Push down on switch to disengage
parking brake.
When the accelerator pedal is
depressed, the parking brakes are
automatically released.
SEAT HEATER SWITCH
POSITIONACTION
HI
For quick heating
NEUTRAL Heater off
LO
POWER LIFTGATE MAIN SWITCH (IF EQUIPPED)
When the power liftgate main switch (located in the
lower center dash area) is ACTIVE, the power liftgate
can be operated using either the power liftgate
switch on the FAST-key, the driver’s side power
liftgate switch or the open/close switches on the
power liftgate.
POWER LIFTGATE SWITCH (IF EQUIPPED)
The power liftgate can be opened by pressing the
Power Liftgate switch.
Please note that you will need to have ALL the doors
unlocked for the unit to work properly. If only the
driver’s door is unlocked, the power liftgate button
will not work.
Keeps seat warm
1500W OUTLET (IF EQUIPPED)
Plug in any appliance that uses AC power such as lights,
an electric coffee maker, a cell phone charger, etc.
Maximum 1500W available combined for both outlets.
STEERING WHEEL WARMER SWITCH (IF EQUIPPED)
The warmer will be activated by pressing the
Steering Wheel Warmer switch. To turn off Steering
Wheel Warmer, press the switch again. Warmer will
automatically turn off after 30 minutes.
MULTI-INFORMATION DISPLAY 23
MULTI-INFORMATION DISPLAY SWITCH
TIRE PRESSURE MONITORING SYSTEM (TPMS)
The Tire Pressure Monitoring System light
illuminates when one or more of your tires
is significantly under inflated. Please note
that changes in the outside temperature may
decrease tire pressure causing the TPMS
light to turn on. If the TPMS light remains
illuminated, check your tire pressure. If the
warning light illuminates, take the necessary
measures referring to the owner’s manual.
Every time the Multi-Information Display switch is pressed, a buzzer
sounds. The display shows a wide range of information including
warnings, service reminder, average fuel consumption, EV cruising range
and energy flow.
OLD FUEL INDICATOR LIGHT
If the vehicle is not refueled with more than 4 gallons at least once every three months, the engine will automatically start, while the ready
indicator is illuminated, to help prevent deterioration of the fuel. At that time, charging of the main drive lithium-ion battery will start and
the battery charge mode display will appear on the information screen in the Multi-information display. The charging will stop, however,
before the main drive lithium-ion battery is fully charged.
The engine may also start even while the EV drive mode is selected or the vehicle is stationary.
24
FAQ’S
Q: What is the Acoustic Vehicle Alert System?
A: This system emits a low-volume sound to alert pedestrians the vehicle is approaching while running in EV mode. The alarm has a different pitch
depending on speed.
Q: My Outlander PHEV has two 12V accessory outlets. What devices can be plugged into these outlets?
A: These outlets are protected with 15 amp fuses. Always check the current draw rating of any device prior to use in the vehicle. If the device is rated
above 12 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).
Q: What are the different ways of playing music from my portable music player through the stereo system in my vehicle?
A: There are two ways of playing music through your vehicle’s sound system.
•USB port - The system will find the songs in your device and categorize them according to Artist, Album, and Genre. Then you can have the audio
system find and play the song in your device that you prefer without physically searching your device. This is done via voice commands.
•Bluetooth® Streaming - Once your device is paired to the system, you can stream music from your device through the audio system to your vehicles'
sound system. No wires or cords. Your music stops and restarts at the same song when you exit and when you re-enter the vehicle. Voice commands
are not available. Please refer to your Owner's Manual for instructions.
Q: What happens if I turn off the vehicle when it’s not in park?
A: If you try to turn the Power switch OFF while in any position besides P, the vehicle will automatically return to the P position.
Q: My Outlander PHEV is equipped with “Micron Air Filtration.” Where is the filter located and does it need servicing?
A: The micron air filter is a small filter element which is located in the HVAC box just behind the lower glove box. The filter should be inspected frequently for
debris. The filter works well at filtering incoming air however the filter will clog and lead to reduced outlet air volume if not serviced on a regular basis.
Q: I am having trouble with my Power Liftgate working properly. Sometimes it works and sometimes it doesn’t. Am I doing something wrong?
A: First check the ACTIVE/OFF button located below the climate control unit and check to see that this button is set to ACTIVE. If so, then you will find that the
system needs to have ALL the doors unlocked for the unit to work properly. If only the driver’s door is unlocked, the power liftgate button will not work.
Q: Why does my Anti-Lock Braking System (ABS) make a noise?
A: Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right front engine
compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.
FAQ’S 25
Q: How can I get the MPG stated on the window sticker?
A: Vehicle driving styles will greatly affect MPG.
•Avoid sudden starts from a stop and let the vehicle coast to a traffic light. Both of these styles will increase mileage and reduce brake lining wear.
•Vehicles are designed to achieve the best fuel mileage when they are driven at the speed limits posted on the freeway. Avoid driving over 65 mph.
•Under inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per gallon. Proper
tire pressure also ensures optimum tire performance (including tire wear.)
Q: Why do my Rain Sensing Windshield Wipers operate on their own when it’s not raining?
A: •When the lever is in the AUTO position, the rain sensor detects rain or snow and automatically turns on the wipers.
•The wipers may automatically operate when things such as insects or foreign objects are affixed to the windshield on top of the rain sensor or when
the windshield is frosted over.
•To stop the wipers, place the lever in the OFF position.
Q: Are there any restrictions if you have an electro-medical apparatus, such as an implantable cardiovascular defibrillator?
A: If you use an electro-medical apparatus, such as an implantable cardiac pacemaker or an implantable cardiovascular defibrillator, follow the
precautions described below.
Quick charging may affect the operation of electric medical devices.
•Do not perform quick charging and keep away from a quick charger. Electromagnetic waves produced by a quick charger may affect the operation
of your electro-medical apparatus.
•If you have accidentally approached a quick charger, walk away from the quick charger immediately.
•If quick charging is necessary, ask someone for help.
•While quick charging:
•Do not stay inside the vehicle.
•Do not go inside the vehicle, for example to remove or place an item in the passenger compartment.
•Do not open the liftgate
•Never connect or disconnect the charger with a wet hand.
•Never pull the cable to disconnect the charger.
2018 OUTLANDER PHEV
MITSUBISHICARS.COM
REV 12/17
Download PDF
Similar pages