zero edge stainless steel sinks

ZERO EDGE STAINLESS STEEL SINKS
CARE & MAINTENANCE TIPS
All Zero Edge stainless steel sinks are made from the finest
nickel bearing stainless steel and will become lovelier with
use and age. Zero Edge sinks are solid stainless steel sinks
containing no coating that can wear off. While your Zero Edge
sink will offer a lifetime of use, it is not self-cleaning and will
require a small amount of regular maintenance to retain its
luxurious finish.
Cleaning Guide
Rinsing is the most important part of sink care. Your Zero Edge
stainless steel sink will retain its original bright appearance if the
sink is rinsed thoroughly after each use. This can be done by
running water from the faucet sprayer hose for a few minutes. A
rinse and towel dry after each use takes care of most everyday
clean-ups.
•
•
•
•
Leave rubber mats, sponges, or cleaning pads in the sink
overnight as this will trap water and could stain or discolor
the sink surface.
Use any drain cleaning products containing sulfuric or
hydrochloric acid as this will damage the sink.
Use silver cleaners which may contain acids that will
damage the sink surface.
Use the inside of the sink as a cutting surface.
Once a week the sink should be cleaned with a mildly abrasive
cleanser, in the direction matching the sink polish finish to
remove stubborn stains and greasy film buildups. This will also
help blend any minor scratches into the satin finish of the sink.
Rinse thoroughly and wipe dry and your sink will shine.
ALWAYS
• Clean everyday by thoroughly rinsing with a mild soap and
warm water then wipe dry.
• Keep the sink free of any standing water as this can cause a
buildup of mineral deposits, which can affect the appearance
of your sink.
• Remove stubborn stains by scrubbing in the direction of the
grain with a mild abrasive cleanser such as SoftScrub.
• Rinse the sink after using any cleaning agent then wipe dry.
• Clean any mineral deposits built up over time with a mild
solution of vinegar and water followed by a thorough
flushing with water.
• Remove any scratches with a Scotch-Brite pad and
cleaning agent. Rub in the direction of the grain. NOT
RECOMMENDED FOR MIRROR FINISH.
NEVER
• Leave water spots, steel cookware, or utensils in the sink
for lengthy periods; iron particles can cause rust spots to
develop on the stainless steel surface.
• Use a steel wool or scouring pad as it will damage the sink
surface and cause discoloration.
• Allow household cleaning agents or bleach to sit in your sink
for long periods of time as this may ruin the finish of the sink.
SUPPORTING PRODUCTS
Mild dish soap or detergent to
remove everyday dirt and stains.
Soft-scrub product for removal of
mineral stain spots.
COPYRIGHT © 2014 DOMAIN INDUSTRIES, INC. | WWW.DOMAININDUSTRIES.COM | ZESS-CM-08242014V3
The manufacturer and distributor will not be responsible or liable for any errors when using the following care and maintenance guide. Please consult a professional sink installer or fabricator for more
details on proper care and maintenance of your sink.
Download PDF
Similar pages