W ire S he lv in g - Bid Room FTP Site for General Contractors

Metro
2436NK3
Item #2
Item #_ ______________________________________________
SUPER ERECTA SHELF®
WIRE Shelving
• Unique Design: The open wire design of these shelves
minimizes dust accumulation and allows free circulation
of air, greater visibility of stored items and greater light
penetration.
• Durable Construction: Super Erecta shelves and posts
are constructed of heavy-gauge carbon steel or Type
304 stainless steel.
• Choice of Finishes: Super Erecta Brite™ and chromeplated for dry storage; Metroseal 3™ with Microban®
antimicrobial product protection and stainless steel
for corrosive environments; and attractive epoxy color
options for merchandising applications.
Wire Shelving
Job_ ________________________________________________
• Versatile: Super Erecta Shelf ® wire shelving can adapt
to your changing needs. By using various accessories,
hundreds of shelving configurations become possible.
• Fast, Secure Assembly: SiteSelect™ Posts have a
double groove visual guide feature every 8" (203mm),
circular grooves at 1" (25mm) increments, and are
numbered at 2" (50mm) intervals. A patented, tapered
split sleeve snaps together around each post. Tapered
openings in the shelf corners slide over the tapered split
sleeves providing a positive lock. Shelf is assembled in
minutes without the use of any special tools.
• Adjustability: Shelves can be adjusted at 1" (25mm)
intervals along the entire length of the post.
• Shelf Ribs: Run front to back, allowing you to slide items
on and off shelves smoothly.
• Shelf Accessibility: Shelves can be loaded/unloaded
easily from all sides This open construction allows
maximum use of storage cube.
• Adjustable Feet: Bolt levelers compensate for surface
irregularities.
Note: Stainless stationary posts are equipped with stainless
steel leveling feet.
10.01
*Microban® and the Microban® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
N13691 ‐ Los Chingones DTC
Page: 1
Metro
2436NK3
Item #2
SUPER ERECTA SHELF ®
WIRE SHELVING
Wire Shelves
Split Sleeve
Aluminum
Split Sleeve
•Metroseal 3: Metro’s proprietary epoxy coating contains Microban®
antimicrobial product protection. Microban antimicrobial protects the epoxy
coating from bacteria, mold, mildew, and fungus that cause odors, stains,
and product degradation.
•See spec sheet 10.14 for epoxy color options.
•Plastic split sleeves are included with each shelf
Replacements are available: Cat. No. 9985 (bag of 4)
•Aluminum split sleeves are recommended for abusive mobile applications
and autoclave applications.
Cat. No. 9986Z (bag of 4 with zinc C-rings)
Cat. No. 9986S (bag of 4 with stainless steel C-rings)
•Load capacity (evenly distributed) per shelf
Depths: 14" to 24" (355 to 610mm)
800 Ibs. (363kg) for lengths of 18" to 48" (457 to 1219mm)
600 Ibs. (272kg) for lengths of 54" (1370mm) or longer
•Load capacity (evenly distributed) per unit.
Stationary shelving units have a maximum load capacity (evenly distributed)
of 2,000 Ibs. (907kg)
Mobile units have a maximum capacity of three times the caster load
rating up to but not exceeding 1,000 Ibs. (453kg) total. Consult the Metro
catalog for caster load ratings
•SUPER ERECTA SHELF meets Government Specifications MIL-S-40144E.
Approx.
Model No.
Model No.
Model No.
Model No.
Nominal Width/Length
Pkd. Wt.
®
Super Erecta BriteChrome
Metroseal 3 with Microban Stainless
(in.)
(mm)
(lbs.) (kg)
1424BR
1430 BR
1436BR
1442BR
1448BR
1460BR
1472BR
1824BR
1830BR
1836BR
1842BR
1848BR
1854BR
1860BR
1872BR
2124BR
2130BR
2136BR
2142BR
2148BR
2154BR
2160BR
2172BR
2424BR
2430BR
2436BR
2442BR
2448BR
2454BR
2460BR
2472BR
1424NC
1430NC
1436NC
1442NC
1448NC
1460NC
1472NC
1824NC
1830NC
1836NC
1842NC
1848NC
1854NC
1860NC
1872NC
2124NC
2130NC
2136NC
2142NC
2148NC
2154NC
2160NC
2172NC
2424NC
2430NC
2436NC
2442NC
2448NC
2454NC
2460NC
2472NC
1424NK3
1430NK3
1436NK3
1442NK3
1448NK3
1460NK3
1472NK3
1824NK3
1830NK3
1836NK3
1842NK3
1848NK3
1854NK3
1860NK3
1872NK3
2124NK3
2130NK3
2136NK3
2142NK3
2148NK3
2154NK3
2160NK3
2172NK3
2424NK3
2430NK3
2436NK3
2442NK3
2448NK3
2454NK3
2460NK3
2472NK3
1424NS
1430NS
1436NS
1442NS
1448NS
1460NS
1472NS
1824NS
1830NS
1836NS
1842NS
1848NS
1854NS
1860NS
1872NS
2124NS
2130NS
2136NS
2142NS
2148NS
2154NS
2160NS
2172NS
2424NS
2430NS
2436NS
2442NS
2448NS
2454NS
2460NS
2472NS
14x24 355x610 6
2.7
14x30 355x760 7
3.2
14x36 355x914 8
3.6
14x42 355x1066 91/2 4.3
14x48 355x1219
101/2 4.7
14x60 355x1524
14
6.3
14x72 355x1829
17
7.7
18x24 457x610 7
3.2
18x30 457x760 8
3.6
18x36 457x914 91/2 4.3
18x42 457x1066
11
5.0
18x48 457x1219
12
5.4
18x54 457x1370
141/2 6.6
18x60 457x1524
17
7.7
18x72 457x1829
20
9.1
21x24 530x610 8
3.6
21x30 530x760 9
4.1
21x36 530x914
11
5.0
21x42 530x1066
12
5.4
21x48 530x1219
14
6.4
21x54 530x1370
16
7.3
21x60 530x1524
18
8.2
21x72 530x1829
24
10.9
24x24 610x610 9
4.1
24x30 610x760
11
5.0
24x36 610x914
13
5.9
24x42 610x1066
15
6.8
24x48 610x1219
16
7.3
24x54 610x1370
19
8.6
24x60 610x1524
21
9.5
24x72 610x1829
26
11.8
Note: 14” (355mm) deep units.
Free-standing units: Foot plates should be used and secured to the floor.
Mobile units: maximum allowable post height is 54” (1370mm).
N13691 ‐ Los Chingones DTC
Page: 2
Metro
2436NK3
Item #2
SUPER ERECTA SHELF ®
WIRE SHELVING
SiteSelect™ Posts
Stationary Posts
Stationary posts are equipped with a leveling bolt to account for uneven floors.
•Height includes leveling bolt (completely tightened) and post cap Leveling
bolt can be adjusted 1/2" (13mm).
•Foot plates may be ordered separately and installed in place of leveling foot.
•Replacement leveling bolts
Zinc Cat. No. RPF04-004 Stainless Steel Cat. No. RPF04-004C
SiteSelect Posts
feature double
grooves every
8" (203mm) to
aid assembly.
•Replacement post cap for standard posts
Black Cat. No. RPC06-035
Model No.
Chrome
Model No.
Metroseal 3
Model No.
Height
with Microban
Stainless Steel
(in.)
(mm)
Approx.
Pkd. Wt.
(lbs.)
(kg)
7P 73/8 187 1/2
13P
13PK3
13PS
143/8 365
1
27P
27PS
283/8 720
13/4
33P
33PK3
33PS
343/8 873
2
54P
54PK3
54PS
547/16 1382
3
63P
63PK3
63PS
627/16 1585
31/2
1
74P
74PK3
74PS
74 /2 1892
4
86P
86PK3
86PS
861/2 2197
5
*96P
961/2 2450
51/2
0.3 0.5 0.75
0.9 1.4 1.6 1.8 2.3 2.5 *96P should not be used on units less than 24" (610mm) deep. Consult Metro Engineering for alternate recommendations.
Mobile Posts (For use with Stem Casters)
•Height includes post cap.
Model No.
Chrome
Model No.
Metroseal 3
Model No.
Height
with Microban
Stainless Steel
(in.)
(mm)
27UP
27UPS
33UP
33UPK3
33UPS
54UP
54UPK3
54UPS
63UP
63UPK3
63UPS
70UPK3
74UP
74UPK3
74UPS
86UP
86UPK3
86UPS
273/4 704
333/4 857
5313/16 1366
6113/16 1570
693/4 1771
737/8 1876
857/8 2181
Approx.
Pkd. Wt.
(lbs.)
(kg)
13/4
2
3
31/2
33/4
4
41/2
0.75
0.9 1.4 1.6 1.7
1.8 2.0 Staked Posts (For use with Truck Dollies)
•Each post connects to the truck dolly through the stem receptacle. The
stem receptacle is staked into the bottom of the post to ensure a durable
connection in abusive mobile applications.
•Each includes a leveling/connecting bolt.
Model No.
Model No.
Height
Chrome
Stainless Steel
(in.)
(mm)
54P-STKD
63P-STKD
74P-STKD
54PS-STKD
63PS-STKD
74PS-STKD
547/16
627/16
741/2
1382
1585
1892
Approx.
Pkd. Wt.
(lbs.)
(kg)
3
31/2
4
1.4
1.6
1.8
Swedged Posts (For use with Stem Casters in Cart Wash Applications)
•Each post has an aluminum cap swedged into the top of the post.
Special Length Posts
Model No.
Height
Stainless Steel
(in.)
(mm)
Special length cut posts
are available. Consult your
Metro representative for
more information.
33UPS-SW
54UPS-SW
63UPS-SW
N13691 ‐ Los Chingones DTC
333/4 857
5313/16
1366
6113/16
1570
Approx.
Pkd. Wt.
(lbs.)
(kg)
2
3
31/2
0.9
1.4
1.6
Page: 3
10.01
Metro
2436NK3
Item #2
Job_ ________________________________________________
SUPER ERECTA SHELF ®
WIRE SHELVING
Super Wide Shelving
• High-density Storage: Super Wide™ shelves have a greater storage
area for holding large quantities of supplies, especially large, bulky
objects, providing maximum storage in minimum space.
• Load Capacity (evenly distributed) per shelf:
Depths: 30" and 36" (760 and 914mm)
600 lbs. (272kg) for lengths 48" (1219mm) or shorter.
400 lbs. (181kg) for lengths 54" (1370mm) or longer.
Model No.
Model No.
Metroseal 3
Model No.
Nominal Width/Length
Chrome
with Microban
Stainless Steel
(in.)
(mm)
Approx.
Pkd. Wt.
(lbs.)
(kg)
15 6.8
21 9.5
261/2 11.8
31
14.0
18 8.2
23
10.4
29
13.1
341/2 15.4
3036NC
3048NC
3060NC
3072NC
3636NC
3648NC
3660NC
3672NC
3036NK3
3048NK3
3060NK3
3072NK3
3636NK3
3648NK3
3660NK3
3672NK3
3036NS
3048NS
3060NS
3072NS
3636NS
3648NS
3660NS
3672NS
30x36 760x914
30x48 760x1219
30x60 760x1524
30x72 760x1829
36x36 910x914
36x48 910x1219
36x60 910x1524
36x72 910x1829
Foot Plates
•Use to bolt units to the floor, or when a broader, more stable foot is desired. Foot plates
also help to protect floors by distributing the point load of the shelving unit across a
larger contact point.
Wire Shelving
•Foot plates (completely tightened) add 1/8" (3mm) to the specified heights of each
stationary post on the table.
Zinc Cat. No. 9993Z
Stainless Steel Cat. No. 9993S
“S’’ Hook
• Used to add on shelving units with only two posts required. Order two per shelf level.
Cat. No. 9995Z
All Metro Catalog Sheets are available on our Web Site: www.metro.com
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741
Fax: 570-825-2852
For Product Information:
U.S. and Canada: 1.800.433.2232
N13691 ‐ Los Chingones DTC
Latin America: 1.561.333.3824
Europe: +31.76.587.7550
L02-006
Printed in U.S.A. Rev. 11/08
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2008 InterMetro Industries Corp.
Asia/Pacific: +65.6567.8003
Middle East/Africa: +971.4.811.8286
Page: 4
Metro
SEC55C
Item #4
Item #_ ______________________________________________
SECURITY UNITS
Features:
• Safe Storage: Protects valuable materials and sensitive items
from loss or pilferage.
• Microban® Antimicrobial Product Protection*: Metroseal 3
and MetroMax Q models feature Microban Antimicrobial Product
Protection, designed to stay “cleaner between cleanings.”
• Ready View of Contents: Heavy-gauge open wire construction
keeps the entire contents of the truck visible at all times, making
it easy to check inventory.
• Adjustable, Optional Intermediate Shelves: Patented, easily
adjustable shelf designs — Super Adjustable Super Erecta,
MetroMax Q, and qwikSLOT — allow flexibility to meet changing
needs. Can be positioned in 1" (25 mm) increments along the
entire height of post.
• Patented, Ergonomic, 1/4 -Turn Door Handle: Makes opening
and closing the unit easier than conventional security unit
designs.
• Double Door: Each door opens 270 degrees and can be
secured along the sides of the unit.
• Time Saving Assembly: Metro security units assemble quickly
— right out of the box.
• Shipped Knocked-Down: Saves on freight costs. Easily
assembled.
Choose from Stationary or Mobile Standard and
Heavy-Duty Configurations:
• Safe Transportation: Mobile, security trucks provide the
advantage of quick, protective transportation.
• Easy Cleaning of Storage Areas: Mobile units move easily
from walls to allow thorough cleaning of floors and walls.
• Mobile Units: Available in Standard and Heavy-Duty models
Heavy-Duty units offer increased rigidity and durability
for applications such as crossing thresholds.
• Stationary Units: Posts have leveling feet to compensate for
uneven surfaces.
Handle (open position)
Security Units
Job_ ________________________________________________
Super Erecta Shelf (HD Mobile)
with optional Super Adjustable
Super Erecta® Intermediate shelves
MetroMax Q (Stationary) with
optional Intermediate shelves
Handle (closed position)
*Microban® and the Microban® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
N13691 ‐ Los Chingones DTC
Page: 5
14.01
qwikSLOT (Mobile) with
optional Intermediate shelves
Metro
SEC55C
Item #4
SECURITY UNITS
Specifications
Super Erecta Shelf Stationary Security
Model No.
Chrome
Model No.
Metroseal 3
SEC33C
SEC33K3
SEC35C
SEC35K3
SEC53C
SEC53K3
SEC55C
SEC55K3
SEC56C
SEC56K3
SEC63C
SEC65C
SEC66C
Model No.
Stainless Steel
(in.)
Width
(mm)
SEC33S
SEC35S
SEC53S
SEC55S
SEC56S
SEC63S
SEC65S
SEC66S
211/2
211/2
271/4
271/4
271/4
331/2
331/2
331/2
546
546
692
692
692
851
851
851
Length
(in.)
(mm)
(in.)
Height
(mm)
381/2 980
501/2 1295
381/2 980
501/2 1295
621/2 1587
381/2 980
501/2 1295
621/2 1587
6613/16
6613/16
6613/16
6613/16
6613/16
6613/16
6613/16
6613/16
1695
1695
1695
1695
1695
1695
1695
1695
(in.)
Fits Shelf
(mm)
18x36 457x914
18x48 457x1219
24x36 610x914
24x48 610x1219
24x60 610x1524
30x36 760x914
30x48 760x1219
30x60 760x1524
Approx. Pkd. Wt.
(lbs.)
(kg)
138
157
154
174
195
167
193
215
63
71
70
79
89
76
88
98
Super Erecta Shelf Mobile Security
Standard-Duty Stem Caster Models: feature 5" (127mm) swivel casters. Please note model numbers for specific caster types.
Model No.
Chrome
Model No.
Metroseal 3
Caster Type
SEC33EC
SEC33EK3
SEC35EC
SEC35EK3
SEC53DC SEC53DK3
SEC55DC SEC55DK3
SEC56DC SEC56DK3
SEC53EC
SEC53EK3
SEC55EC
SEC55EK3
SEC56EC
SEC56EK3
SEC53VK3
SEC55VK3
SEC56VK3
SEC63EC
SEC65EC
SEC66EC
(in.)
(2) 5MP/(2) 5MPB
(2) 5MP/(2) 5MPB
(4) 5MP
(4) 5MP
(4) 5MP
(2) 5MP/5MPB
(2) 5MP/5MPB
(2) 5MP/5MPB
(2) 5PC/5PCB
(2) 5PC/5PCB
(2) 5PC/5PCB
(2) 5MP/(2) 5MPB
(2) 5MP/(2) 5MPB
(2) 5MP/(2) 5MPB
Width
(mm)
21 /2
211/2
271/4
271/4
271/4
271/4
271/4
271/4
271/4
271/4
271/4
331/2
331/2
331/2
1
546
546
692
692
692
692
692
692
692
692
692
851
851
851
Length
(in.)
(mm)
40 /4
523/4
403/4
523/4
65
403/4
523/4
65
403/4
523/4
65
403/4
523/4
65
3
Height
(in.)
(mm)
1035
1340
1035
1340
1651
1035
1340
1651
1035
1340
1651
1035
1340
1651
68 /2
681/2
681/2
681/2
681/2
681/2
681/2
681/2
681/2
681/2
681/2
681/2
681/2
681/2
1
1740
1740
1740
1740
1740
1740
1740
1740
1740
1740
1740
1740
1740
1740
(in.)
Fits Shelf
(mm)
18x36 457x914
18x48 457x1219
24x36 610x914
24x48 610x1219
24x60 610x1524
24x36 610x914
24x48 610x1219
24x60 610x1524
24x36 610x914
24x48 610x1219
24x60 610x1524
30x36 760x914
30x48 760x1219
30x60 760x1524
Approx. Pkd. Wt.
(lbs.)
(kg)
146 66
165 75
162 74
182 83
203 92
162 74
182 83
203 92
162 74
182 83
203 92
175 80
202 92
223 101
Casters: 5MP and 5MPB (with locking brake) feature a polyurethane tread.
5PC and 5PCB (with locking brake) castes feature a polymer horn and resist rusting. They are recommended for high-moisture environments.
Heavy-Duty Models: feature aluminum dollies with wraparound bumpers and 5" (127mm) diameter casters.
Model No.
Chrome
SEC53LC
SEC55LC
SEC56LC
Model No.
Metroseal 3
Caster Type
SEC53LK3
SEC55LK3
SEC56LK3
Width
(in.)
(mm)
(2) B5P/B5PB
(2) B5P/B5PB
(2) B5P/B5PB
28 /16 713
281/16 713
281/16 713
1
Length
(in.)
(mm)
Height
(in.)
(mm)
38 /2 980
501/2 1285
631/8 1600
68 /2 1740
681/2 1740
681/2 1740
1
1
(in.)
Fits Shelf
(mm)
24x36 610x914
24x48 610x1219
24x60 610x1524
Approx. Pkd. Wt.
(lbs.)
(kg)
187 85
210 95
235 107
Stainless Steel: Casters must be ordered separately on “-SD” models. Dollies and casters must be ordered separately on “-HD” models.
Model No.
SEC33S-SD
SEC35S-SD
SEC53S-SD
SEC55S-SD
SEC56S-SD
SEC63S-SD
SEC65S-SD
SEC66S-SD
SEC53S-HD
SEC55S-HD
SEC56S-HD
Description
Standard Duty
Standard Duty
Standard Duty
Standard Duty
Standard Duty
Standard Duty
Standard Duty
Standard Duty
Heavy Duty
Heavy Duty
Heavy Duty
Width
(in.)
(mm)
211/2
211/2
271/4
271/4
271/4
331/2
331/2
331/2
281/16
281/16
281/16
546
546
692
692
692
851
851
851
713
713
713
Length
(in.)
(mm)
Height
(in.)
(mm)
403/4 1035
523/4 1340
403/4 1035
523/4 1340
65
1651
403/4 1035
523/4 1340
65
1651
381/2 980
501/2 1285
631/8 1600
62
62
62
62
62
62
62
62
62
62
62
1575
1575
1575
1575
1575
1575
1575
1575
1575
1575
1575
(in.)
Fits Shelf
(mm)
18x36 457x914
18x48 457x1219
24x36 610x914
24x48 610x1219
24x60 610x1524
30x36 760x914
30x48 760x1219
30x60 760x1524
24x36 610x914
24x48 610x1219
24x60 610x1524
Approx. Pkd. Wt.
(lbs.)
(kg)
138
157
154
174
195
167
193
215
154
174
195
63
71
70
79
89
76
88
98
70
79
89
NOTE: Given height is for unit without dolly or casters (depending on model chosen). For approximate overall unit height add chosen caster diameter plus 1" (25mm).
Caution: Large casters can create a tipping hazard. On 18" (457mm) security units, do not use casters larger than 5" (127mm) in diameter.
Intermediate Super Adjustable Shelves for Super Erecta Shelf Security Units
Model No.
Chrome
Model No.
Metroseal 3
A1836NC
A1836NK3
A1848NC
A1848NK3
A2436NC
A2436NK3
A2448NC
A2448NK3
A2460NC
A2460NK3
A3036NC
A3048NC
A3060NC
Model No.
Stainless Steel
Width
(in.)
(mm)
Length
(in.)
(mm)
A1836NS
A1848NS
A2436NS
A2448NS
A2460NS
A3036NS
A3048NS
A3060NS
18
18
24
24
24
30
30
30
36 914 91/2 4.3
48 1219
12
5.4
36 914
13
6
48 1219
16
7
60 1524
21
9.5
36 914
15
6.8
48 1219
21
9.5
60 1524
261/2 11.8
457
457
610
610
610
760
760
760
Approx. Pkd. Wt.
(lbs.)
(kg)
NOTE: Standard Super Erecta shelves can also be used as intermediate shelves. Refer to catalog sheet 10.01 for more information.
N13691 ‐ Los Chingones DTC
Page: 6
Metro
SEC55C
Item #4
SECURITY UNITS — MetroMax Q
MetroMax Q Security Units
• Microban antimicrobial product protection is built into the
enclosures, doors, handles, and shelves to keep the product
“cleaner between cleanings.”
• Optional intermediate shelves: MetroMax Q quick adjust shelves or
corrosion proof MetroMax i.
Specifications
• Standard Units consist of taupe epoxy coated top and bottom wire
shelves, tri-lobal steel posts, wire enclosures, and doors. Casters
and bumpers are included with mobile units. Intermediate shelves
are sold separately.
• Grid openings: 13/4" x 13/4" (44 x 44mm).
MetroMax Q Stationary Units — 663/16" (1681mm) High
Model No.
MQSEC53E
MQSEC55E
MQSEC56E
Actual Outside Dimensions
(including handle)
Width
Length
Fits Shelf
(in.)
(mm)
(in.)
(mm)
(in.)
(mm)
2615/16 685
2615/16 685
2615/16 685
387/8 987
507/8 1292
627/8 1597
Approx.
Pkd. Wt.
(lbs.) (kg)
24 x 36 610 x 914
24 x 48 610 x 1219
24 x 60 610 x 1524
148 67
156 71
161 73
Note: Leveling foot on post can be adjusted up to 1" (25mm) to compensate for uneven floors.
MQSEC53VE with optional
intermediate shelves
MetroMax Q Stem Caster Mobile Units — 6713/16" (1723mm) High
Model No.
Includes four
5" (127mm) diameter
swivel casters
Model No.
Includes four
5" (127mm) diameter
swlvel casters
MQSEC53DE
MQSEC55DE
MQSEC56DE
MQSEC53VE
MQSEC55VE
MQSEC56VE
Actual Outside Dimensions
(including bumpers and handle)
Width
Length
(in.)
(mm)
(in.)
(mm)
2713/16 707
2713/16 707
2713/16 707
403/4 1035
523/4 1340
643/4 1645
(in.)
Fits Shelf
(mm)
24 x 36 610 x 914
24 x 48 610 x 1219
24 x 60 610 x 1524
Approx.
Pkd. Wt.
(lbs.) (kg)
166 75
176 80
179 81
Note: DE models use four 5MPX casters.
VE models use two 5PCX and two 5PCBX casters.
Ergonomic 1/4-turn
door handle
MetroMax Q Heavy-Duty Mobile Units — 681/2" (1740mm) High
Mounted on an aluminum dolly with 5" (127mm) plate casters and
wraparound bumpers.
Model No.
MQSEC53LE
MQSEC55LE
MQSEC56LE
Actual Outside Dimensions
(including handle)
Length
(in.)
(mm)
Width
(in.)
(mm)
281/16 713
281/16 713
281/16 713
391/8 994
511/8 1299
631/8 1603
(in.)
Fits Shelf
(mm)
24 x 36 610 x 914
24 x 48 610 x 1219
24 x 60 610 x 1524
Note: The aluminum dollies used on the LE models have two B5P and two B5PB plate casters.
Optional Intermediate Shelves
i
i
Q
Shelf with Grid Mat
Model No.
Shelf with Solid Mat
Model No.
Shelf with Grid Mat
Model No.
MX2436G
MX2448G
MX2460G
MX2436F
MX2448F
MX2460F
MQ2436G
MQ2448G
MQ2460G
N13691 ‐ Los Chingones DTC
Nominal Width
(in.)
(mm)
Nominal Length
(in.) mm)
24 610
24 610
24 610
36 914
48 1219
60 1524
Approx.
Pkd. Wt.
(lbs.)
(kg)
166 75
176 80
179 81
Replacement Tri-Lobal
Adapters for MetroMax Q
Wire Security Shelves
Model No. MTLA*
Four pair per bag.
*Not compatible with MetroMax Q security units
manufactured prior to May 2009. For older
MetroMax Q security units, use MQ9985 wedges
if replacements are needed for the wire shelves.
Page: 7
Metro
SEC55C
Item #4
SECURITY UNITS
qwikSLOT™ Security Units
•Add /Remove a Shelf Feature: Allows the unit to be
quickly adapted to fit your changing storage needs.
•Shelves can easily be adjusted in seconds.
Specifications
Interior shelves pictured are optional
and must be ordered separately.
qwikSLOT Stationary Security
Model No.
Width
Length
Height
Chrome
(in.)
(mm)
(in.)
(mm)
(in.)
(mm)
SEC33CQ
SEC35CQ
SEC53CQ
SEC55CQ
SEC56CQ
211/2
211/2
271/4
271/4
271/4
546
546
705
705
705
381/2
501/2
381/2
501/2
621/2
980 6613/16
1283 6613/16
980 6613/16
1283 6613/16
1587 6613/16
Approx.
Pkd. Wt.
(lbs.)
(kg)
1695
1695
1695
1695
1695
138
157
154
174
195
63
71
70
79
89
qwikSLOT Mobile Security
Standard-Duty Stem Caster Models: feature 5" (127mm) swivel casters. Please note model numbers for specific
caster types.
Model No.
Width
Length
Height
Chrome
Caster Type
(in.)
(mm)
(in.)
(mm)
(in.)
(mm)
Approx.
Pkd. Wt.
(lbs.)
(kg)
146
165
162
182
203
162
182
203
SEC33ECQ
SEC35ECQ
SEC53DCQ
SEC55DCQ
SEC56DCQ
SEC53ECQ
SEC55ECQ
SEC56ECQ
(2) 5MP/5MPB
(2) 5MP/5MPB
(4) 5MP
(4) 5MP
(4) 5MP
(2) 5MP/5MPB
(2) 5MP/5MPB
(2) 5MP/5MPB
211/2
211/2
271/4
271/4
271/4
271/4
271/4
271/4
546
546
692
692
692
692
692
692
403/4
523/4
403/4
523/4
65
403/4
523/4
65
1035
1340
1035
1340
1651
1035
1340
1651
681/2
681/2
681/2
681/2
681/2
681/2
681/2
681/2
1740
1740
1740
1740
1740
1740
1740
1740
66
75
74
83
92
74
83
92
Casters: 5MP and 5MPB (with locking brake) feature a polyurethane tread. 5PC and 5PCB (with locking brake) casters feature a polymer horn and resist rusting.
They are recommended for high moisture environments.
Caution: Large casters can create a tipping hazard. On 18" (457mm) security units, do not use casters larger than 5" (127mm) in diameter.
Heavy-Duty Models: feature aluminum dollies with wraparound bumpers and 5" (127mm) diameter casters.
Model No.
Width
Length
Height
Chrome
Caster Type
(in.)
(mm)
(in.)
(mm)
(in.)
(mm)
Approx.
Pkd. Wt.
(lbs.)
(kg)
187 85
210 95
235 107
SEC53LCQ
SEC55LCQ
SEC56LCQ
(2) 5BP/5BPB
(2) 5BP/5BPB
(2) 5BP/5BPB
281/16
281/16
281/16
713
713
713
381/2 980
501/2 1283
631/8 1600
681/2 1740
681/2 1740
681/2 1740
Intermediate Shelves for Super Erecta Shelf Security Units
Model No.
Width
Length
Chrome
(in.)
(mm)
(in.)
(mm)
1836QBR*
1848QBR*
2436QBR*
2448QBR*
2460QBR
18
18
24 24
24
457
457
610
610
610
Approx.
Pkd. Wt.
(lbs.)
(kg)
36 914 81/2
48 1219
111/4
36 914
13
48 1219
16
60 1524
21
3.8
5.0
6.0
7.0
9.5
*Chrome qwikSLOT shelves available in sizes 18x36, 18x48, 24x36, and 24x48 (457x914, 457x1219, 610x914, 610x1219, and 610x1524).
**Drop Mat qwikSLOT shelves with 1" (25mm) ledge also available in sizes 24x36, 24x48 (610x914, 610x1219).
N13691 ‐ Los Chingones DTC
Page: 8
Metro
SEC55C
Item #4
SECURITY UNITS
Super Erecta® Shelf
SECURITY Modules
for Standard 24" (610mm) Wide Super Erecta Shelf
Wire Units
• Designed to convert a standard 24" (610mm) wide unit into
a combination of open and lockable shelving through the
use of a kit.
• Kit Includes: Two end panels, one back panel and one
door and slides. Fits between any two shelves spaced 20"
(508mm) apart on any Super Erecta Shelf Wire Unit with 24"
(610mm) wide shelves in 30", 48" and 60" (762, 1219 and
1524mm) lengths.
• Versatile: Security Modules enclose only one section of
the shelving unit, leaving the rest open for conventional
use. Depending upon your needs, more than one Security
Module can be used on the same shelving unit.
• Ready View of Contents: As with Metro’s Security Trucks
and Stationary Security Units, the heavy-gauge, openwire construction of the Security Module keeps its entire
contents visible at all times, and makes inventory easy.
• Convenient Door: Has hasps for two padlocks and, when
opened, slides under the upper shelf conveniently out of
the way.
• Durable Chrome-Plated Finish
Note: Security Modules can be installed on 24" (610mm) wide
Super Erecta Shelf wire shelves only.
When multiple security modules are stacked on one shelving
unit, separate top and bottom shelves are still necessary for
each module.
Two Security Modules on Stationary Unit
Specifications
Width
Length
Height
Model No.
Description
(in.)
(mm)
(in.)
(mm)
(in.) (mm)
Approx.
Pkd. Wt.
(lbs.)
(kg)
291/2
393/4
453/4
SECM2430NC
SECM2448NC
SECM2460NC
Security Module
Security Module
Security Module
24 610
24 610
24 610
30 760
48 1219
60 1524
20 508
20 508
24 508
14
18
21
Note: Security Module consists of side panels, back panels and door. Posts and shelves sold separately.
N13691 ‐ Los Chingones DTC
Page: 9
14.01
Metro
SEC55C
Item #4
Job_ ________________________________________________
SECURITY UNITS
Utility Carts with Secure Storage
Corrosion Proof Model in Stainless Steel
• Corrosion Proof: Features stainless steel wire and solid shelves,
security module, and posts.
• Easy to Maneuver: Includes two 5MP swivel casters and two 5MPB
swivel/brake casters.
• Solid top shelf with raised ship’s edge is ideal for use as a work
surface and can contain unwanted spills
• Easy assembly in minutes.
Width
Length
Height
Model No.
(in.) (mm)
(in.) (mm)
(in.)
(mm)
Cart Load
Rating
(lbs.)
(kg)
SECMLAB
600 273
24 610
30 760
39 990
Approx.
Pkd. Wt.
(lbs.)
(kg)
85 38.6
Other finishes and configurations
are available:
+
Similar units can be constructed
using chrome-plated components and
galvanized solid Super Erecta shelves.
Refer to the security modules on the
previous page, and pair them with
Metro SP series wire carts or your own
combination of SES posts and shelves, for
a customized solution. Security modules
must be placed between two wire shelves.
Security Units
Technical Information and Recommended Usage Guidelines: Security Units
• Shelves:
— Solid shelves cannot be used
as the top or bottom shelf
on a security unit. For those
applications requiring a solid
bottom surface, Super Erecta
Shelf inlays are recommended.
—It is recommended that standard
Super Erecta shelves are used
for the top and bottom shelves
on a Super Erecta security unit.
• Security Enclosure Panels:
— Grid spacing measures
13/4" x 13/4" (44 x 44mm).
— The distance from the top of the
top shelf to the top of the bottom
shelf measures approximately
57" (1448mm).
• Mobile Units:
— 18" (457mm) deep security units
must be used with casters that
have a diameter of 5" (127mm)
or less.
—Order aluminum split sleeves with
c-rings for use with the top and
bottom SES shelves of a mobile
unit for applications that require
a more rigid assembly. (9986Z
for aluminum sleeves with zinc
c-rings; 9986S for aluminum
sleeves with stainless c-rings)
All Metro Catalog Sheets are available on our Web Site: www.metro.com
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741
Fax: 570-825-2852
For Product Information:
U.S. and Canada: 1.800.433.2232
N13691 ‐ Los Chingones DTC
Latin America: 1.561.333.3824
Europe: +31.76.587.7550
• Use with other Metro components:
— Tray slides (15SNC, 20SNC)
measure approximately 23"
(584mm) in height. A standard
security unit can accommodate
2 levels of these tray slides.
— Metro’s brake/lock plate caster
system can be used with 24"
(610mm) deep security mobile
units featuring a dolly base.
— Solid SES shelves can be used
as interior shelves on a security
unit. Wire shelves must be used
as the top and bottom shelves.
— A push handle is available
through Custom Engineering
for the 24" (610mm) deep SES
security units (subject to custom
order minimums). Handle is
available in chrome finish
(Part # CC2835N).
L02-086A
Printed in U.S.A. Rev. 7/09
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2009 InterMetro Industries Corp.
Asia/Pacific: +65.6567.8003
Middle East/Africa: +971.4.811.8286
Page: 10
Metro
A2448NC
Item #4
Item # ______________________________________________
WIRE SHELVING
Super Adjustable™ Super Erecta Wire Shelving is the most advanced and
innovative wire storage system available.
• Maximum Space Utilization: The Corner Release System
encourages repositioning of shelves during initial assembly to
reclaim wasted vertical space. In some cases, reclaimed vertical
space will allow an extra shelving tier to be added to the storage
unit resulting in a 25% increase in storage capacity!
• Easily Assembled: The unique Corner Release System enables
quick and easy repositioning of shelves during the initial set up
to accommodate different package or container sizes. “Total
Assembly” is complete only after the shelves are properly spaced
to maximize storage. SiteSelect™ Posts, with the double-groove
visual guide feature, have circular grooves at 1" (25mm) increments
and are numbered at 2" (51mm) intervals to easily identify proper
shelf locations.
• Easily Adjustable: The unique shelf design and SiteSelect™ Posts
enable “tool-free”, quick adjustment at 1" (25mm) increments along
the entire height of the post.
• Improved Rigidity: An enhanced Corner Release System has
made Super Adjustable™ the most rigid, easily adjustable shelving
system ever.
• Strong: Super Adjustable™ shelves hold as much weight as traditional
Super Erecta wire shelving. Stationary units hold a maximum of 2,000
lb. (910kg). Maximum weight capacity per shelf (48" [1219mm] or
shorter = 800 lb. [364kg]; longer than 48" [1219mm] = 600 lb. [273kg])
• Choice of Finishes: Super Adjustable™ Super Erecta shelving
is available in a variety of finishes: chrome-plated for dry storage;
Metroseal 3™ with antimicrobial product protection and Type 304
stainless steel for corrosive environments.
• Accessories: Compatible with the entire system of Super Erecta
shelves and accessories. See Catalog Sheets 10.04, 10.05, 10.06
for more information.
SUPER ADJUSTABLE™ SUPER ERECTA SHELF ®
SUPER ADJUSTABLE™ SUPER ERECTA SHELF®
Adjustable Wire Shelving
Job ________________________________________________
Dry Storage — Chrome
Corner Release System
Super Adjustable™ Advantage . . .
Easy "no tool"
shelf adjustment
1" 25mm spacing
minimizes dead space
Efficient use of space
allows more storage
levels to be added.
10.01A
Storage efficiency
can increase by
25% or more!
*MICROBAN® and the MICROBAN® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
N13691 ‐ Los Chingones DTC
Page: 11
10.01A
Metro
A2448NC
Item #4
Job ________________________________________________
SUPER ADJUSTABLE ™ SUPER ERECTA SHELF ®
WIRE SHELVING
Dimensions
Adjustable Wire Shelving
SUPER ADJUSTABLE™ SUPER ERECTA SHELF ®
Super Adjustable™ Super Erecta Wire Shelving
Model No.
Chrome
Model No.
Metroseal 3
Model No.
Stainless
A1424NC
A1430NC
A1436NC
A1442NC
A1448NC
A1460NC
A1472NC
A1824NC
A1830NC
A1836NC
A1842NC
A1848NC
A1854NC
A1860NC
A1872NC
A2124NC
A2130NC
A2136NC
A2142NC
A2148NC
A2154NC
A2160NC
A2172NC
A2424NC
A2430NC
A2436NC
A2442NC
A2448NC
A2454NC
A2460NC
A2472NC
A3036NC
A3048NC
A3060NC
A3072NC
A3636NC
A3648NC
A3660NC
A3672NC
A1424NK3
A1430NK3
A1436NK3
A1442NK3
A1448NK3
A1460NK3
A1472NK3
A1824NK3
A1830NK3
A1836NK3
A1842NK3
A1848NK3
A1854NK3
A1860NK3
A1872NK3
A2124NK3
A2130NK3
A2136NK3
A2142NK3
A2148NK3
A2154NK3
A2160NK3
A2172NK3
A2424NK3
A2430NK3
A2436NK3
A2442NK3
A2448NK3
A2454NK3
A2460NK3
A2472NK3
A1424NS
A1430NS
A1436NS
A1442NS
A1448NS
A1460NS
A1472NS
A1824NS
A1830NS
A1836NS
A1842NS
A1848NS
A1854NS
A1860NS
A1872NS
A2124NS
A2130NS
A2136NS
A2142NS
A2148NS
A2154NS
A2160NS
A2172NS
A2424NS
A2430NS
A2436NS
A2442NS
A2448NS
A2454NS
A2460NS
A2472NS
A3036NS
A3048NS
A3060NS
A3072NS
A3636NS
A3648NS
A3660NS
A3672NS
Shelf Width/Length
(in.)
(mm)
14x24
14x30
14x36
14x42
14x48
14x60
14x72
18x24
18x30
18x36
18x42
18x48
18x54
18x60
18x72
21x24
21x30
21x36
21x42
21x48
21x54
21x60
21x72
24x24
24x30
24x36
24x42
24x48
24x54
24x60
24x72
30x36
30x48
30x60
30x72
36x36
36x48
36x60
36x72
Approx. Pkd. Wt.
(lbs.)
(kg)
355x610
355x760
355x914
355x1066
355x1219
355x1524
355x1829
457x610
457x760
457x914
457x1066
457x1219
457x1370
457x1524
457x1829
530x610
530x760
530x914
530x1066
530x1219
530x1370
530x1524
530x1829
610x610
610x760
610x914
610x1066
610x1219
610x1370
610x1524
610x1829
760x914
760x1219
760x1524
760x1829
914x914
914x1219
914x1524
914x1829
6
7
8
91/2
101/2
14
17
7
8
91/2
11
12
141/2
17
20
8
9
11
12
14
16
18
24
9
11
13
15
16
18
21
26
15
21
261/2
31
18
23
29
341/2
2.7
3.2
3.6
4.3
4.7
6.3
7.7
3.2
3.6
4.3
5.0
5.4
6.6
7.7
9.1
3.6
4.1
5.0
5.4
6.4
7.3
8.2
10.9
4.1
5.0
5.9
6.8
7.3
8.6
9.5
11.8
6.8
9.5
11.8
14.0
8.2
10.4
13.1
15.4
All Environments —
Metroseal 3™ with
*Microban® Antimicrobial
Product Protection
Mobile Options
Stem Casters
Dolly Trucks
NOTE: MICROBAN® protects the Metroseal 3 coating from bacteria, mold, mildew and fungi that cause odors, stains and
product degradation. For Metroseal 3 shelving information see sheet #10.10A.
SiteSelect™ Posts
Actual Height*
(in.)
(mm)
Replacement Parts
Each kit includes
components for one
original Super Adjustable
or Super Adjustable shelf;
(4) wedges, (4) sleeves,
(4) shelf releases.
Model No. SAKITA2
73/8
143/8
283/8
343/8
547/16
627/16
—
741/2
861/2
961/2
187
365
720
873
1382
1585
—
1892
2197
2450
STATIONARY
Model No.
Model No.
Plated
Metroseal 3
7P
13P
27P
33P
54P
63P
—
74P
86P
**96P
7PK3
13PK3
27PK3
33PK3
54PK3
63PK3
—
74PK3
86PK3
96PK3
Model No.
Stainless
7PS
13PS
27PS
33PS
54PS
63PS
—
74PS
86PS
96PS
Actual Height*
(in.)
(mm)
63/4
133/4
273/4
333/4
5313/16
6113/16
693/4
737/8
857/8
MOBILE
Model No.
Model No.
Plated
Metroseal 3
171
349
704
857
1366
1570
1771
1876
2181
7UP
13UP
27UP
33UP
54UP
63UP
70UP
74UP
86UP
7UPK3
13UPK3
27UPK3
33UPK3
54UPK3
63UPK3
—
74UPK3
86UPK3
Model No.
Stainless
7UPS
13UPS
27UPS
33UPS
54UPS
63UPS
—
74UPS
86UPS
Approx.
Pkd. Wt.
(lbs.) (kg)
1
/2
1
13/4
2
3
31/2
33/4
4
41/2
51/2
0.3
0.5
0.75
0.9
1.4
1.6
1.7
1.8
2.0
2.5
* Actual height for the stationary post includes the post cap and the leveling bolt completely tightened.
Important: When ordering by components remember that for maximum stability, units should be kept as wide
and low as possible.
All Metro Catalog Sheets are available on our Web Site: www.metro.com
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information:
U.S. and Canada: 1-800-992-1776
Outside U.S. and Canada: www.metro.com/contactus
N13691 ‐ Los Chingones DTC
Printed in U.S.A.
L02-006A
Rev. 4/11
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2011 InterMetro Industries Corp.
Page: 12
New Age
1331S
Item #8
Job:
Item:
New Age Industrial Corp., Inc.
Quantity:
PO Box 520 • 16788 US Hwy 36 • Norton, Kansas 67654
Phone: 800-255-0104 • Fax: (877)-877-7687 • www.NewAgeIndustrial.com
Bun Pan Racks
Virtually Maintenance Free,
•
All welded construction insures the maximum
strength and stability of each rack.
•
Shipped assembled for immediate use.
•
Available in both end and side loading styles, to
accommodate 18” x 26”, 13” x 18”, and 14” x 18”
pans
Easy to Maneuver
•
Equipped with four 5” heavy duty platform type
casters.
•
Non-marking wheels protect floors and minimize
noise.
•
Caster plates are securely welded to the frame of
each unit and casters are then bolted to the caster
plate…not directly to the frame…with four bolts.
This procedure strengthens the overall integrity
of the rack and prevents breakage.
#1330
#1461
Guaranteed To Last
•
Five-Year Guarantee against material defects and
workmanship.
•
Lifetime Guarantee against rust and corrosion.
NSF Certified
NSF
®
#1331S
This information is for general sales and engineering use
only. New Age Industrial reserves the right to modify or
make changes at any time without notice to materials and
specifications.
N13691 ‐ Los Chingones DTC
#1461S
Made For:
Page: 13
New Age
1331S
Item #8
Job:
Item:
New Age Industrial Corp., Inc.
Quantity:
PO Box 520 • 16788 US Hwy 36 • Norton, Kansas 67654
Phone: 800-255-0104 • Fax: (877)-877-7687 • www.NewAgeIndustrial.com
Bun Pan Racks
APPLICATIONS: General storage and movement of
trays and pans.
20 3/8"
26"
18 3/8"
CONSTRUCTION: Heavy duty, high tensile, extruded
aluminum. Type 6463-T5 alloy.
GUSSETS (8)
1" R-S
TUBE
TRAY SLIDES: Slides are 1¼” x 1⅝” x .100 extruded
aluminum angle welded to frame.
FRAME & CROSS SUPPORTS: Vertical and
horizontal frame members are 1” x 1” x .070 extruded
aluminum tubing. All welded unit.
63"
CORNER GUSSETS: Gussets of 1½” x 1½” x ⅝”
thick angle are welded to the inside angles (bottom
side) where horizontal cross bracing meets vertical
uprights. Note: Each gusset requires 4½” of weld.
3" TYP.
30"
CASTERS: Platform type, 5” diameter wheel, full
swivel design with sealed ball bearing. Wheel
material is non-marking polyurethane.
1 5/8"
2 3/4"
Model
No.
Size
W-H-D
Pan
Cap.
Runner
Spacing
Ship
Wt.
¾-SIZE END LOADING RACK
1361
20⅜” x 60” x 26”
17
3”
54#
END LOADING RACKS
1461*
2011/16” x 69¾” x 26”
1330
20⅜” x 69¾” x 26”
1331
20⅜” x 69¾” x 26”
1332
20⅜” x 69¾” x 26”
1333
20⅜” x 69¾” x 26”
1334
20⅜” x 69¾” x 26”
38
30
20
15
12
10
1½”
2”
3”
4”
5”
6”
56#
70#
58#
49#
46#
42#
38
30
20
15
12
10
1 ½”
2”
3”
4”
5”
6”
50#
60#
51#
45#
42#
41#
#1331
NSF
®
SIDE LOADING RACKS
1461S*
1330S
1331S
1332S
1333S
1334S
28⅜”
28⅜”
28⅜”
28⅜”
28⅜”
28⅜”
x
x
x
x
x
x
69¾”
69¾”
69¾”
69¾”
69¾”
69¾”
x
x
x
x
x
x
19”
19”
19”
19”
19”
19”
Four 5” platform type swivel casters (#C450).
* #1461 & #1461S Units Hold Pans By The Lip Only.
This information is for general sales and engineering use
only. New Age Industrial reserves the right to modify or
make changes at any time without notice to materials and
specifications.
N13691 ‐ Los Chingones DTC
Made For:
Page: 14
Fisher
N13691 ‐ Los Chingones DTC
3511
Item #13
Page: 15
Southbend
SLGS/22SC
Item #20
CONVECTION OVEN
SL-Series
GAS,DOUBLE DECK
Standard Features
OPTIONAL NRG System required
for rebates. NRG System units are
Energy Star Approved. (Standard
Depth Only)
Item#
- Patented, high efficiency, inshot burners
- 72,000 BTU (NAT or LP) per oven cavity
- Available standard and bakery depths
- Double deck convection oven is 66.8” in height
- Patented “plug-in, plug-out” control panel
- Slide out control panel for full view servicing
- Stainless Steel front, top and sides
- Dependent glass doors (Full 180° opening)
- Energy saving high efficiency glass windows
- Heat keeping dual door seal system
- Coved, fastener-free, porcelain interior
- Stay cool heavy duty door handle
- Soft Air, two speed, 1/2 hp, fan motor
- 11-position rack guides and 5 plated oven racks
- Electronic ignition with solid state temperature controls
- Forced cool down fan mode
- Oven “heat” light cycles with burners
- Interior oven lights
Available Controls
SC-Standard Controls
140°F to 500°F solid state thermostat and
60 minute mechanical cook timer.
CCH-Cycle / Cook & Hold Control
150°F to 550°F temperature controller with 140°F to
200°F “Hold” thermostat dual digital display shows time
and temperature. A fan cycle timer pulses the fan.
(SLGS/22SC shown with optional casters)
STANDARD CONSTRUCTION SPECIFICATIONS
Exterior Finish: Stainless steel front, top and sides.
Doors: Dependent doors with windows. Low emission glass,
stainless steel construction, heavy-duty welded steel frame
and 5/8” diameter full-length hinge pin.
Oven Interior: Porcelain enamel finish, coved, fastener free.
Rack and Rack Guides: Heavy-duty removable wire rack guides
spaced on 1-5/8” centers offer 11 different rack positions. 5 wire
racks provided with each oven.
Blower Fan and Motor: 1/2hp, 2-speed motor, 1710/1120 r.p.m
Oven Heating: 72,000 BTU (NAT or LP). Oven heating
is regulated by an adjustable solid state thermostat control.
Blower fan circulates air within the cavity “scrubbing” heat to
the oven interior for even heat distribution within the cavity.
Electronic Ignition: Hot surface ignitor with flame safety
device.
Control Panel: Located on front, at right side of oven, away
from heat zone. Slide out panel extends over 17” for easy
servicing.
Interior Lights: Two 40 watt high temperature recessed
lamps located within the oven cavity.
Legs: 6” stainless steel legs standard.
From SLG/22 Rev 15 (September/2014)
N13691 ‐ Los Chingones DTC
Job
SLGS/22SC, SLGS/22CCH
SLGB/22SC, SLGB/22CCH
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
Page: 16
Southbend
Models:
SLGS/22SC
SLGS/22SC SLGS/22CCH
Item #20
SLGB/22SC
SLGB/22CCH
Dimensions -in (mm)
3” (76)
Full 180° Opening
29.34”
(746)
18.63”
(473)
66.75”
(1695)
9”
64.75”
(1645)
2.5” (64)
43.63”
(956)
29.34”
(746)
13.5”
(343)
40.63”
(1032)
14.5”
(368)
2.5” (64)
11.5”
(292)
8.5” (216)
Depth
Oven Interior
Rack Clearance
Shipping Crate
MODEL
A
B
C
Width
Depth
Height
Width
Depth
Width
Depth
Height
Volume
Weight
SLGS/22
37.25”
(946)
30.25”
(768)
35.50”
(873)
29”
(737)
21.50”
(546)
20.”
(508)
28.25”
(718)
21”
(533)
57.50”
(1461)
45.5”
(1156)
81.5”
(2070)
123.4 cu. ft.
(3.49 cu. m.)
1040 lbs
(471.7 kg.)
SLGB/22
43.50”
(1105)
36.50”
(927)
41.75”
(1060)
29”
(737)
29”
(737)
20”
(508)
28.25”
(718)
27.25”
(692)
57.50”
(1461)
45.5”
(1156)
81.5”
(2072)
123.4 cu. ft.
(3.49cu. m.)
1100 lbs
(499.0 kg.)
UTILITY INFORMATION
GAS: • Standard and Bakery Depth: 72,000 BTU (NAT or LP) per oven cavity
• One 3/4” male connection
• Required minimum inlet pressure:
- Natural gas 7” W.C.
- Propane gas 11” W.C.
MISCELLANEOUS
•
If using flex hose connector, the I.D should not be smaller than
3/4” and must comply with ANSI Z 21.69.
• If casters are used with flex hose, a restraining device should
be used to eliminate undue strain on the flex hose.
•
Clearances from combustibles: Top-0”, bottom-0”, right side-0”
and left-2”
• Recommend - install under vented hood
ELECTRIC: Standard: 120/60/1 phase, furnished with 6’ cord w/3prong plug (1 plug/deck). NEMA #5-15p. Total maximum amps 7.9.
Optional: 208/60/1 (190-219 volts). Supply must be wired to junction box
with terminal block located at rear. Total maximum amps 4.3 per deck.
Optional: 240/60/1 (220-240 volts). Supply must be wired to junction box
with terminal block located at rear. Total maximum amps 3.8 per deck.
Optional: 240/50/1 (208-240 volts). Supply must be wired to junction box
with terminal block located at rear. Total maximum amps 6.0 per deck.
• Check local codes for fire and sanitary regulations
• If the unit is connected directly to the outside flue, an A.G.A
approved down draft diverter must be installed at the flue outlet
of the oven
• Oven cannot be operated without fan in operation
Notice: Southbend reserves the right to change specifications
and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions, or
replacements for previously purchased equipment.
OPTIONS AND ACCESSORIES

List the voltage, frequency, and amps (see
utility information above). ___VAC, ___Phase,
___Hz
 Stainless steel exterior bottom
 Down draft diverter for direct flue
 Casters 4” or 6”
 3/4” quick disconnect with flexible hose
 Stainless steel rear jacket
 Knocked down packaging
 Stainless steel oven interior
 Marine edge top
 NRG system, will make the unit
Energy Star approved
 Swivel Caster - front with locks
(specify length: 3ft, 4ft, or 5ft)
 2” air insulation panel (stainless steel
only)
 Export crating only)
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
From SLG/22 Rev 15 (September/2014)
N13691 ‐ Los Chingones DTC
Page: 17
Dormont
1675KITS48
Item #20
For Commercial Applications
Job Name ________________________________________
Job Location_______________________________________
Engineer _________________________________________
Approval __________________________________
Contractor ________________________________________
Approval _________________________________________
Contractor's P.O. No.________________________________
Representative _____________________________________
SKU ______________________________________________
Single Swivel MAX®/SnapFast® Quick-Disconnect Assemblies
Sizes: ½" to 1¼" (15 to 32mm)
Single Swivel MAX®/SnapFast® Quick-Disconnect Assemblies feature flexible movement and the
one-handed, quick-disconnect fitting with a unique thermal shut-off design that automatically shuts off the
gas when the internal temperature exceeds 350°F (177°C). The 360° movement of Swivel MAX adds extra
protection to the life of the connector and increases kitchen aisle space by allowing the appliance to be
closer to the wall.
SnapFast®
One-handed
Quick-Disconnect
Features
Swivel MAX®
Multi-plane Fitting .................. Aluminum body, plated steel fitting
Movement .............................. 360° rotational end fitting
Swivel MAX®
Multi-plane
Rotation Fitting
SnapFast® One-Handed Quick-Disconnect
Quick-Disconnect.................... Brass body, aluminum collar
Thermal Shut-off..................... Shuts off gas when internal temperatures exceed 350°F (177ºC)
Specifications
The Dormont Blue Hose®
Tubing .................................
Braiding
.................................
Coating
.................................
End Fittings.............................
Stress Guard®.........................
Annealed, 304 stainless steel
Multi-strand, stainless steel wire
Blue antimicrobial PVC, melts at 350ºF (177ºC),
coating will not hold a flame
Carbon steel; zinc trivalent chromate
360º rotational end fitting at both ends
Additional Components
Restraining Device.................. PVC-coated, steel multi-strand cable and mounting hardware
Valve ................................. Full port, brass body
Elbow
................................. Malleable iron, 1 included
Approvals & Certifications
Stress Guard®
Rotation Technology
Reduces Stress at Both
Ends of the Hose
The Dormont
Blue Hose®
Stainless Steel Construction
Stainless Steel Braid
Blue Antimicrobial
PVC Coating
(Cutaway shown)
NSF/ANSI 169 – Special-purpose food equipment and devices
ANSI Z21.69/CSA 6.16 – Connectors for moveable gas appliances
ANSI Z21.41/CSA 6.9 – Quick-disconnect devices for use with gas fuel appliances
ANSI Z21.15/CSA 9.1 – Manually operated gas valves for appliances, appliance connector
UL 567 – Pipe connectors for flammable and combustible liquids and LP gas
Meets requirements of ANSI Z223.1/NFPA 54 National Fuel Gas Code.
Refer to the catalog for additional approvals and certifications or go to www.dormont.com.
Not for use in temperatures less than 32°F (0°C). For indoor use only.
Maximum operating pressure 1/2 psi.
A restraining device is required for all moveable gas equipment.
The Dormont Safety System™ is the first and only complete gas equipment
connection system specifically engineered for the commercial kitchen.
The Safety System consists of the famous Dormont Blue Hose and a variety of accessories designed for improved safety and performance in commercial kitchens. Because they
are manufactured in the USA under an ISO qualified production process and to multiple design certifications, you
can Connect with Confidence with the Dormont Safety System.
N13691 ‐ Los Chingones DTC
Stress Guard®
Rotation Technology
Reduces Stress at Both
Ends of the Hose
Page: 18
Dormont
1675KITS48
Item #20
Single Swivel MAX® with SnapFast® Quick-Disconnect Deluxe Kit Assembly
Ordering Information
LENGTH
Configuration
Size I.D.
24" (607mm)
36" (914mm)
48" (1,219mm)
60" (1,524mm)
Deluxe Kit*
Basic Kit**
½" (15mm)
Hose Assembly***
1650KITS24
1650BPQSR24
1650BPQS24
Deluxe Kit*
Basic Kit**
¾" (20mm)
Hose Assembly***
72" (1,829mm)
1650KITS36
1650BPQSR36
1650BPQS36
1650KITS48
1650BPQSR48
1650BPQS48
1650KITS60
1650BPQSR60
1650BPQS60
1650KITS72
1650BPQSR72
1650BPQS72
1675KITS24
1675BPQSR24
1675BPQS24
1675KITS36
1675BPQSR36
1675BPQS36
1675KITS48
1675BPQSR48
1675BPQS48
1675KITS60
1675BPQSR60
1675BPQS60
1675KITS72
1675BPQSR272
1675BPQS72
Deluxe Kit*
Basic Kit**
1" (25mm)
Hose Assembly***
16100KITS24
16100BPQSR24
16100BPQS24
16100KITS36
16100BPQSR36
16100BPQS36
16100KITS48
16100BPQSR48
16100BPQS48
16100KITS60
16100BPQSR60
16100BPQS60
16100KITS72
16100BPQSR72
16100BPQS72
Deluxe Kit*
Basic Kit**
1¼" (32mm)
Hose Assembly***
16125KITS24
16125BPQSR24
16125BPQS24
16125KITS36
16125BPQSR36
16125BPQS36
16125KITS48
16125BPQSR48
16125BPQS48
16125KITS60
16125BPQSR60
16125BPQS60
16125KITS72
16125BPQSR72
16125BPQS72
BTU/hr Flow Capacity Natural Gas (Flow rating BTU/hr 0.64 SP. GR. @ 0.5 inch WC pressure drop)
LENGTH
Model
Size I.D.
24" (607mm)
36" (914mm)
48" (1,219mm)
60" (1,524mm)
72" (1,829mm)
1650BPQS
½" (15mm)
81,000
72,000
63,000
56,000
51,000
1675BPQS
¾" (20mm)
216,000
203,000
167,000
147,000
130,000
16100BPQS
1" (25mm)
385,000
353,000
310,000
274,000
260,000
16125BPQS
1¼" (32mm)
535,000
491,000
482,000
463,000
460,000
*Deluxe Kits include: The Dormont Blue Hose, Swivel MAX, SnapFast, restraining device, full port valve, street elbow and display box
**Basic Kits include: The Dormont Blue Hose, Swivel MAX, SnapFast, restraining device and street elbow
***Hose Assemblies include: The Dormont Blue Hose, Swivel MAX, SnapFast and street elbow
The Dormont Blue Hose®
Typical Installation
The Dormont Blue Hose is a commercial, moveable-grade gas
connector designed for use with moveable equipment.
Moveable equipment is defined in ANSI Standard Z21.69/CSA 6.16
as gas utilization equipment that may be mounted on casters or
otherwise be subject to movement.
• Reduces stress on connector
• Increases kitchen aisle space by allowing connector to be positioned closer to the wall
• One-handed quick-disconnect fitting
• Thermal shut-off when internal temperature exceeds 350°F (177°C)
Restraining Device
•
ANSI Z21.69 Standard section 1.7.4 states: Connectors when used on caster-mounted equipment shall be installed with a restraining device, which prevents transmission of the strain to the connector
We guarantee our commercial gas connectors for the
life of the original appliance to which it is connected.
A Watts Water Technologies Company
ES-D-SwivelSnapFast 1306
N13691 ‐ Los Chingones DTC
USA: Export, PA • Tel. (724) 733-4800 • Fax: (724) 733-4808 • www.dormont.com
© 2013 Dormont
Page: 19
Southbend
BGLM‐30
Item #21
Gas Tilting Skillet
with Manual Tilt
Job
Capacity
Model
BTU
BGLM-30
100,000
30
114
BGLM-40
125,000
40
152
Gallon
Liter
Item#
OPERATION SHALL BE BY:
 Natural Gas
 Propane Gas
The controls shall be equipped for operating on 115 VAC,
single phase, 50/60Hz, 2 Amps
OPTIONAL ITEMS AT EXTRA COST:
 220 VAC, 1 phase, 50/60 Hz
 Etched gallon markings (GMS-30, GMS-40)
 Etched liter markings (LMS-30, LMS-40)
 2" draw off valve with strainer, side mounted (TVT-2BP)
Model BGLM-30
 3” draw off valve with strainer, side mounted (TVT-3BP)
Shall be a Southbend model ___________________________,
gas fired skillet with manual tilt, AGA/CGA and NSF certified. The
unit shall have a spring assisted stainless steel cover, with full
width handle, no drip condensate guide and vent port with swing
cover. The pan shall have a sloped front and be front hinged for
easy tilting pour control and comes complete with a removable
pour strainer. The pan is formed from 10 gauge stainless steel
with a #4 finish exterior and polished interior with coved corners
for easy cleaning. Cooking surface shall be 5/8” thick stainless
steel clad plate ensuring even heat distribution over entire
cooking surface. The pan shall be heated with stainless steel
atmospheric burners with direct spark ignition.
The pan shall be mounted on a heavy duty welded frame with
stainless steel exterior supported by an all welded 1-5/8" (41 mm)
stainless steel pipe frame with adjustable bullet feet and rear
legs fitted with flange adjustable feet for securing to the floor.
Unit shall have a permanently lubricated, self-contained gear
box tilt mechanism to allow the pan to tilt forward for complete
emptying of contents. The controls enclosure shall be designed
to meet NEMA-2 and provide a degree of protection against
dripping and light splashing and shall include a solid state
thermostat with OFF position and a range of 100°F - 450°F
(38°C - 232°C) a thermostat indicator light, pan tilt switch that
shuts burners off if tilted more than 5°, and high temperature
cut-off set at 500°F (260°C).
Form BGLM Rev 2 (September/2010)
N13691 ‐ Los Chingones DTC
 Correctional Package
ACCESSORIES:
 Pan carrier (PC-1)
 Steam pan insert (SPI-30, SPI-40)
 12” Single pantry faucet with swing spout (SF-12)
 12” Double pantry faucet with swing spout (DF-12)
 3” Stainless steel faucet plumbing enclosure (3139-1)
 Single pantry faucet & bracket with 60” pot filler (SF-60)
 Double pantry faucet & bracket with 60” pot filler (DF-60)
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
Page: 20
Southbend
BGLM‐30
Item #21
Models:  BGLM-30  BGLM-40
REAR FLANGED-FOOT DETAIL
B
33"
(838)
A
2.62"
(67)
Pan Depth
9-1/8" (232)
23-1/2"
(597)
7-1/2" (191)
2.87" (73)
Four equally spaced 7/16” (11mm)
holes, 3” (76mm) between centers.
4" (102)
6" (152)
3.25" (83)
TOP VIEW
Gas connection is on bottom,
2-5/8” (67mm) from front.
Six-foot (1.8m) long electric cord
enters on bottom, 2-7/8” (73mm) from front.
C
E
40"
(1016)
28"
(711)
13-1/4"
(337)
12"
(305)
D
29-3/8" (746)
10" (254)
FRONT VIEW
SIDE VIEW
21" (533)
1-1/2" (38)
6" (152)
Electric
Cord
3-1/4" (83)
Gas
Connection
FRONT VIEW SHOWING CONNECTIONS
DIMENSIONS
Model
Capacity
Units
A
B
C
D
E
BGLM-30
30 Gallons
(114 liters)
inches
(mm)
38.875”
(987 mm)
33.5”
(851 mm)
36”
(914 mm)
33.625”
(854 mm)
71.375”
(1813 mm)
BGLM-40
40 Gallons
(152 liters)
inches
(mm)
39.875”
(1000 mm)
43.5”
(1105 mm)
48”
(1219 mm)
45.625”
(1159 mm)
70.875”
(1800 mm)
Model
Shipping Weight
BGLM-30
BGLM-40
Gas Supply
BTU/HR
kW/HR
550 lbs.
[250 kg]
100,000
29.3
720 lbs.
[327 kg]
125,000
36.6
Supply Pipe Pressure (W.C)
Natural
6” - 14”
(152 mm - 356 mm)
Propane
11” - 14”
(279 mm - 356 mm)
Minimum Clearance *
Sides
0
Back
6”
(152 mm)
* For use on noncombustible floors only.
SERVICE CONNECTIONS
- Unless otherwise specified unit is furnished with 6’ cord with 3 prong
plug for use at 120 Volts, 60 Hz, single phase, maximum 2 Amps.
- GAS CONNECTION: Supply gas through 3/4” pipe.
C
- COLD WATER: 3/8” O.D. tubing to optional faucet
H
- HOT WATER: 3/8” O.D. tubing to optional faucet
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Form BGLM Rev 2 (September/2010)
N13691 ‐ Los Chingones DTC
Page: 21
Southbend
P36D‐BBB
Item #23
36" Sectional Range
Six 33,000 BTU Open-Top Burners
Item#
• 36" wide sectional range with six open-top burners available
with a standard-oven base, convection-oven base, cabinet
base, or as a modular unit (for mounting
on countertop, refrigerated or freezer base).
• Six 35,000 BTU NAT (35,000BTU LP) patented clog-free
burners
• Removable, welded steel top grates
• 9-1/4" deep front rail
• Removable drip tray
• Stainless steel front, sides, rear and exterior bottom
• Fully insulated lining and burner box
• 1-1/4" front gas manifold and 1" rear gas connection
• 5" high stainless steel flue riser
• Free battery-design assistance
Standard Features of Oven-Base Models
• 45,000 BTU NAT (45,000 BTU LP) oven with standing pilot
• Heavy duty, stainless steel door handle
• Porcelain enamel interior
• Oven racks (2 for standard oven, 3 for convection oven)
• “Insta-On” thermostat ranging from 175°F to 550°F
• Standard-oven interior is large enough (26" by 26-1/2") for
sheet pans to fit either way
• Convection-oven models have 1/2 hp, two-speed blower
Standard Features of Cabinet-Base Models
• Stainless steel cabinet with removable doors that open from
the center
Standard Features of Step-Up Models
• Rear burners are 4" higher than front burners
Model P36A-BBB with optional 24" flue riser
Standard CONSTRUCTION SPECIFICATIONS
Model 36D: 45,000 BTU NAT (45,000 BTU LP) oven with
Exterior Finish: Front and sides constructed of #3 polished
standing pilot and thermostat range of 175°F to 550°F (79°C
430 and 304 stainless steel. to 288°C). Porcelain enamel interior, measuring 14” high x
Range: 36"-wide front-manifold sectional range with six
26” wide x 26.5” deep. Two racks with five-position side rails.
35,000 BTU NAT (35,000 BTU LP) clog-free, open-top
Model 36A: 45,000 BTU NAT (45,000 BTU LP) convection
burners with removable, welded steel top grates.
oven with standing pilot and thermostat range of 175°F to
Front Rail: 9-1/4" deep front rail.
550°F (79°C to 288°C). Porcelain enamel interior, measuring
14” high x 26” wide x 24” deep. Three racks with five-position
Flue Riser: 5" high stainless steel flue riser
side rails. Two-speed, 1/2 hp blower motor.
Battery: Unit can be in any position in a battery. If the unit is
at the end of the battery, the end side will be solid (rather than Model 36C: Stainless steel cabinet base with two removable
doors that open from the center.
have a coverplate over the end of the front manifold).
Legs: 6" stainless steel adjustable legs standard.
Form P36-BBB Rev 10 (April/2014)
N13691 ‐ Los Chingones DTC
Job
Standard Features
• Standard (2) years limited parts and labor warranty (reference
http://www.southbendnc.com/service.html for limited warranty
details).
 P36N-BBB (Modular Mount)
 P36N-BBB-SU (Modular Mount with Step-Up Rear Burners)
 P36C-BBB (Cabinet Base)
 P36C-BBB-SU (Cabinet Base with Step-Up Rear Burners)
 P36D-BBB (Standard-Oven Base)
 P36D-BBB-SU (Standard-Oven Base with Step-Up Rear Burners)
 P36A-BBB (Convection-Oven Base)
 P36A-BBB-SU (Convection-Oven Base with Step-Up Rear Burners)
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
Page: 22
Southbend
P36D‐BBB
Item #23
Models:  P36N-BBB  P36N-BBB-SU  P36C-BBB  P36C-BBB-SU  P36D-BBB  P36D-BBB-SU  P36A-BBB  P36A-BBB-SU
Shipping Crate Dimensions & Weight
10 "
(254)
41"
24"
(610) (1041)
37-1/2"
(953)
20-1/2"
(521)
9-1/4"
(235)
Solid shelving has
a depth of 10".
Optional Shelf
Tubed and Tray
shelving have a
depth of 11-1/8".
4" Step-Up
Burner Option
8-1/2" (216)
TOP VIEW
SIDE VIEW of MODULAR MODEL
Width
Height
Depth
P36N-BBB
P36N-BBB-SU
45.5"
(1156)
23"
(584)
55"
(1397)
33.3 cu ft
390 lbs
(0.94 cu m) (176.9 kg)
Volume
Weight
P36C-BBB
P36C-BBB-SU
45.5"
(1156)
45"
(1143)
55"
(1397)
65.2 cu ft
600 lbs
(1.85 cu m) (272.2 kg)
P36D-BBB
P36D-BBB-SU
45.5"
(1156)
45"
(1143)
55"
(1397)
65.2 cu ft
706 lbs
(1.85 cu m) (320.2 kg)
P36A-BBB
P36A-BBB-SU
45.5"
(1156)
45"
(1143)
55"
(1397)
65.2 cu ft
759 lbs
(1.85 cu m) (344.3 kg)
Dimensions shown in inches and (millimeters)
36" (914)
43-1/2" (1105)
40" (1016)
36" Flue Riser
Optional extra-deep flue riser (cooking area is
same as for models with standard flue riser).
37-1/2" (953)
34" (864)
24" Flue Riser
5" Flue Riser
5" (127)
72"
(1829)
60"
(1524)
41"
(1041)
36"
(914)
Model
33-3/4"
(859)
Motor for
Convection
Oven Models
15-3/4"
(400)
FRONT VIEW
Electrical
Connection
for Oven
Models
Rear Gas
Connection
Front Gas
Manifold
6" (152)
20"
(508)
UTILITY INFORMATION
ELECTRICITY: All oven models with optional electronic ignition
require 50Hz or 60Hz single-phase power. 120V models have a 7-foot power cord with ground plug (5.9A for "A" models). 208/240V
models have a terminal block for connection to a single-phase
208/240V source (2.7A for "A" models).
18"
(457)
*(+/- 1” tolerance)
SIDE VIEW
GAS: Each unit has a
Gas (BTU/hour)
Electricity (Amps)
Model
1-1/4" front manifold
Natural
Propane
120V
208/240V
that couples to the
P36N-BBB
adjacent sectional
210,000
210,000
P36N-BBB-SU
unit(s), and a 1" rear
P36C-BBB
gas connection with a
P36C-BBB-SU 210,000 210,000
male NPT connector.
P36D-BBB
Minimum gas supply
0*
0*
P36D-BBB-SU 255,000 255,000
pressure is 7" W.C.
P36A-BBB
for natural gas and
5.9*
2.7*
P36A-BBB-SU 255,000 255,000
11" W.C. for propane.
*Standing Oven Pilot Models
All sectional units
require a regulated gas supply (a pressure regulator must be ordered
separately). If using a flexible-hose gas connection, the inside
diameter of the hose must not be smaller than the connector on
the unit and must comply with ANSI Z21.69, providing an adequate
means of restraint to prevent undue strain on the gas connection.
2-1/2" (64)
REAR VIEW
MISCELLANEOUS
• If casters are used with a flexible-hose gas connection, a
restraining device should be used to prevent undue strain
on the hose.
• Minimum clearance from noncombustible construction is
zero (except there must be 2" clearance behind the blower
motor of convection-oven models). Minimum clearance
from combustible construction is 10" (254 mm) on sides
and 6" (152 mm) on rear.
• Installation under a vented hood is recommended.
• Check local codes for fire and sanitary regulations.
NOTICE:
Southbend has a policy of continuous product research and improvement. We reserve the right to change specifications and product
design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for
previously purchased equipment.
OPTIONS and ACCESSORIES
 External pressure regulator
 Front rail options:
Cutouts in front rail for sauce pans
7-1/4" deep front rail (to match old style
sectional)
Square belly bar mounted on 7-1/4"
deep front rail
 Casters (front two casters lock)
 Cable restraint kit (to restrict movement
when on casters)
 Stainless steel oven interior
 Salamander or cheesemelter mounted on
36" high flue riser
 24" or 36" high flue riser
 Shelves on flue riser (one on 24" flue riser,
one or two on 36" flue riser, 10" deep)
 Removable shelf inside cabinet
 Tray or tubular shelving (12" deep)
 Removable, cast iron grate tops
 Open-frame base with casters for battery
 Extra-deep rear-extending flue riser
 Electronic pilot ignition - Piezo
 Electronic oven pilot ignition (no charge)
 Battery spark ignition for open tops
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Form P36-BBB Rev 10 (April/2014)
N13691 ‐ Los Chingones DTC
Page: 23
True
TRCB‐48
TRUE FOOD SERVICE
EQUIPMENT, INC.
2001 East Terra Lane • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Item #25
AIA #
Project Name:
Location:
Item #:
SIS #
Qty:
Model #:
Chef Base:
Model:
TRCB-48
Drawered Refrigerator
TRCB-48
True’s refrigerated chef bases are
designed with enduring quality
that protects your long term
investment.
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower utility
costs, exceptional food safety
and the best value in today’s food
service marketplace.
Oversized, environmentally
friendly (134A) forced-air
refrigeration system holds 33°F to
38°F (.5°C to 3.3°C).
Cabinet top is one piece, heavy
duty reinforced stainless steel.
Drip resistant “V” edge protects
against spills. Supports up to 717
lbs. (326 kg).
All stainless steel front, top and
sides. Matching aluminum
finished back.
Each drawer accommodates two
(2) full size 12"L x 20"W x 4"D (305
mm x 508 mm x 102 mm) food
pans (sold separately).
Heavy-duty stainless steel drawer
slides and rollers. Removable
without tools for easy cleaning.
Foamed-in-place using Ecomate.
A high density, polyurethane
insulation that has zero ozone
depletion potential (ODP) and zero
global warming potential (GWP).
Scan code
for video
ROUGH-IN DATA
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
(mm)
Model
TRCB-48
Drawers
2
L
D†
H*
HP
483/8
321/8
203/8
1/5
1229
816
518
1/3
† Depth does not include 1" (26 mm) for rear bumpers.
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
APPROVALS:
TRUE REFRIGERATION®
MADE IN
U.S.A.
Voltage
Amps
NEMA
Config.
115/60/1
5.4
5-15P
230-240/50/1
3.2
▲
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
7
325
2.13
AVAILABLE AT:
SINCE 1945
8/14
N13691 ‐ Los Chingones DTC
148
▲Plug type varies by country.
Printed in U.S.A.
Page: 24
True
TRCB‐48
Model:
Chef Base:
TRCB-48
Drawered Refrigerator
STANDARD FEATURES
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Oversized, factory balanced refrigeration system
with guided airflow to provide uniform product
temperatures.
• Extra large evaporator coil balanced with higher
horsepower compressor and large condenser;
maintains cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C) for the best in food preservation.
• Sealed, cast iron, self-lubricating evaporator
fan motor(s) and larger fan blades give True
chef base units a more efficient, low velocity,
high volume airflow design. This unique design
ensures faster temperature recovery and
shorter run times in the busiest of food service
environments.
• Condensing unit accessed from behind side
grill; slides out for easy maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel front, top and sides.
Matching aluminum finished back.
• Interior - attractive, NSF approved, white
aluminum liner. Stainless steel floor with coved
corners.
Item #25
• Insulation - entire cabinet structure and drawer
ELECTRICAL
• Unit completely pre-wired at factory and ready
for final connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.
facings are foamed-in-place using Ecomate. A
high density, polyurethane insulation that has
zero ozone depletion potential (ODP) and zero
global warming potential (GWP).
• 4” (102 mm) diameter plate castors - locks
provided on front set.
• Cabinet top is one piece, heavy duty reinforced
300 series stainless steel. Drip resistant “V” edge
protects against spills. Supports up to 717 lbs.
(326 kg).
DRAWERS
• Stainless steel exterior drawer facings and liners.
Stainless steel drawer frames.
• Each drawer fitted with 12” (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
• Heavy-duty stainless steel drawer slides and
rollers. Removable without tools for easy
cleaning.
• Magnetic drawer gaskets of one piece
construction, removable without tools for ease
of cleaning.
• Each drawer accommodates two (2) full size
12”L x 20”W x 4”D (305 mm x 508 mm x 102
mm) food pans (sold separately).
• Drawers support a wide variety of incremental
pan size configurations; each drawer standard
with one (1) full length removable divider bar.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• Exterior digital temperature display.
• NSF-7 compliant for open food product.
RECOMMENDED OPERATING CONDITIONS
• Counter-top cooking equipment should be
used in conjunction with the manufacturer
supplied legs. Minimum clearance of 4” (102
mm) is required between bottom of cooking
equipment heating element and the TRCB top.
Failure to provide clearance voids manufacturer
warranty.
• Installation of a heat shield is recommended for
optimum performance (supplied by others).
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑❑ 230 - 240V / 50 Hz.
❑❑ 6” (153 mm) standard legs (1 set of 4 leg
mounting plates required).
❑❑ 6” (153 mm) seismic/flanged legs (1 set of 4 leg
mounting plates required).
❑❑ Heavy duty, 16 gauge top.
❑❑ Flat top (no marine edge).
❑❑ Additional size drawer divider bars.
❑❑ Remote cabinets (condensing unit supplied
by others; system comes standard with 404A
expansion valve and requires R404A refrigerant).
Consult factory technical service department for
BTU information. All remote units must be hard
wired during installation.
PLAN VIEW
WARRANTY*
Three year warranty on all parts METRIC DIMENSIONS ROUNDED UP TO THE
and labor and an additional 2 year
NEAREST WHOLE MILLIMETER
warranty on compressor.
(U.S.A. only)
SPECIFICATIONS SUBJECT TO CHANGE
*RESIDENTIAL APPLICATIONS: TRUE assumes no liability for parts or
labor coverage for component failure or other damages resulting
from installation in non-commercial or residential applications.
WITHOUT NOTICE
KCL
Model
Elevation Right
Plan
3D
TRCB-48
TFQY191E TFQY135S TFQY191P TFQY1913
Back
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 • Fax (636)272-2408 • Toll Free (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
N13691 ‐ Los Chingones DTC
Page: 25
Southbend
HDG‐48
Item #26
Counterline - Griddle
Heavy Duty, Thermostatic and Manual, Gas
- Available in 18”, 24”, 36”, 48”, 60” and 72” widths
- 30,000 BTU (NAT or LP) burner per 12” Thermostatic Models
- 20,000 BTU (NAT or LP) burner per 12” Manual Models
Thermostatic Griddles:
HDG-18, HDG-24, HDG-36, HDG-48, HDG-60, HDG-72
Job
Standard Features
Manual Griddles:
HDG-18-M, HDG-24-M, HDG-36-M, HDG-48-M, HDG-60-M,
HDG-72-M
- Electronic spark ignition (battery)
Item#
- Stainless steel front, vent and sides are standard, rear and
bottom panels are aluminized steel.
- Reinforced, insulated double wall sides
- 1” thick polished rolled steel plate
- 5” high rear and 4” side splash guards
- 3/4” rear gas connection and pressure regulator
- Protected flue opening
- Exclusive “NO COLD” Zone -Uniform heat distribution across
surface
- Each burner equipped with runner tube
- Grease drawers with large capacity
- Fully welded griddle plate with protected exhaust vent
Standard Features of Thermostatic Griddle Models
(Model HDG-24)
- “Insta-on” thermostatic controls for precise settings between
200°F and 400°F
- Imbedded load sensing thermostat
- Flame failure safety device
STANDARD CONSTRUCTION SPECIFICATIONS
Exterior Finish: Front, sides and vent are constructed of #3
polished 430 and 304 stainless steel. Bottom and rear are
aluminized steel. Sides are reinforced and fully insulated. 5”
rear and 4” side splash.
Griddle Plate: 18”, 24”, 36”, 48”, 60”, 72” wide unit with one
30,000 BTU (NAT or LP) burners every 12” on thermostatic
models and one 20,000 BTU (NAT or LP) burners every 12” on
manual models. Fully welded, 1” thick polished steel griddle plate
with side splash guards, and grease drawer.
Form HDG Rev 11 (June/2014)
N13691 ‐ Los Chingones DTC
Griddle Controls: Independent, “Insta-on” thermostatic controls
with uniform temperature range of 200°F to 400°F. (Thermostatic
models ONLY)
Legs: Stainless steel 4” adjustable legs.
Gas Heat Control System: Each foot of griddle is heated by a
“U” shaped burner. Each burner is controlled by a thermostatic
control. For safety, each pilot has a flame failure device. A
3/4” rear gas connection is standard. Units over 48” wide are
constructed of two bodies.(Thermostatic models ONLY)
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
Page: 26
Southbend
Models:
HDG-18
HDG-18-M
HDG‐48
HDG-24
HDG-24-M
HDG-36
HDG-36-M
HDG-48
HDG-48-M
Item #26
HDG-60
HDG-72
HDG-60-M HDG-72-M
WIDTH
Model
2”
(806)
HDG-18/
HDG-18-M
24”
(610)
29.86”
(759)
(Model shown with thermostatic controls)
Shipping Crate Dimensions & Weight
Burners
Crated Crated
Width
@30,000
Width
Depth
BTU
18”
31”
39”
1
(457)
(788)
(991)
Crated
Weight
270 lbs
(122 kg)
HDG-24/
HDG-24-M
24”
(610)
2
31”
(788)
39”
(991)
305 lbs
(159 kg)
HDG-36/
HDG-36-M
36”
(915)
3
55”
(1398)
39”
(991)
445 lbs
(202 kg)
HDG-48/
HDG-48-M
48”
(1220)
4
55”
(1398)
39”
(991)
545 lbs
(247 kg)
HDG-60/
HDG-60-M
60”
(1525)
5
67”
(1703)
45.5”
(1157)
705 lbs
(320 kg)
HDG-72/
HDG-72-M
72”
(1830)
6
110”
(2796)
45.5”
(1157)
840 lbs
(378 kg)
31.75” (806)
10”
(254)
11” (279)
16”
15.25” (410)
(387)
5.25” (133)
3” (76)
29.44” (748)
a
UTILITY INFORMATION
GAS: Each unit has a 3/4” rear
gas connection with a male NPT
connector(female when regulator is
added). Minimum supply pressure
is 7” W.C. for natural gas and 11”
W.C. for propane. All units require
a regulated gas supply. pressure
regulator included. If using a flexible
hose gas connection, the I.D. of
the hose must not be smaller than
the connector on the unit and must
comply with ANSI Z21.69, providing
an adequate means of restraint to
prevent undue strain on the gas
connection.
Model
Gas (BTU/hr)
Natural Propane
HDG-18/
HDG-18-M
30,000
30,000
20,000
20,000
HDG-24/
HDG-24-M
60,000
60,000
40,000
40,000
HDG-36/
HDG-36-M
90,000
90,000
60,000
60,000
HDG-48/
HDG-48-M
120,000 120,000
HDG-60/
HDG-60-M
150,000 150,000
HDG-72/
HDG-72-M
180,000 180,000
80.000
80,000
100,000 100,000
120,000 120,000
MISCELLANEOUS
- If casters are used with flex hose, a restraining device
should be used to eliminate undue stain on the flex hose.
- Minimum clearance from noncombustible construction
is zero. Minimum clearance from combustible construction is 12” on sides and 8” on rear.
- Install under vented hood.
- Check local codes for fire and sanitary regulations.
NOTICE:
Southbend has a policy of continuous product research
and improvement. We reserve the right to change
specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding
changes, improvements, additions or replacements for
previously purchased equipment.
OPTIONS AND ACCESSORIES
Stainless steel stand
Casters for stand
Stainless steel plate shelf with or Grooved griddle plates
without cutting board
Chrome plated griddle plates
2” high insulator base for mounting on refrigerated base
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Form HDG Rev 11 (June/2014)
N13691 ‐ Los Chingones DTC
Page: 27
Southbend
TVGS/12SC
Item #28
TV-Series
Low Profile, Gas, Convection Oven
Standard Features
TVGS/12SC - single deck TruVection
- 52,000 BTU (NAT or LP)
Job
- Patented, high efficiency, non-clog, Inshot burners
- Available in standard depth
- Single deck TruVection oven is 27-1/4” in height (29-7/8” with flue)
- Patented “plug-in, plug-out” control panel
- Slide out control panel for full view servicing
- Stainless steel front, sides and top
Item#
- Dependent glass doors (Full 180° opening)
- Energy saving high efficiency glass windows
- Heat keeping dual door seal system
- Coved, fastener-free, porcelain interior
- Stay cool heavy duty door handle
- Soft Air, two speed, 1/2 hp, fan motor
- 5-position rack guides and 3 plated oven racks
- Electronic ignition with solid state temperature controls
- Forced cool down fan mode
- Oven “heat” light cycles with burners
- Interior oven lights
- Platinum modular equipment or Heavy
Duty Counterline units can sit on single deck.
Overlapping range tops require an additional add-on
cabinet. (See spec sheet TVGS/32SC for stacked
Available Control
TVGS/12SC shown with optional platinum
equipment mounted on top and optional casters
SC-Standard Controls
150°F to 550°F solid state thermostat and 60 minute
mechanical cook timer.
Standard CONSTRUCTION SPECIFICATIONS
Exterior Finish: Stainless steel front, sides and top.
Doors: Dependent doors with windows. Low emission glass,
stainless steel construction, heavy-duty welded steel frame and
5/8” diameter full-length hinge pin.
Oven Interior: Porcelain enamel finish, coved, fastener free.
Rack and Rack Guides: Heavy-duty removable wire rack guides
spaced on 1-5/8” centers offer 5 different rack positions. 3 wire
racks provided with each oven.
Electronic Ignition: Hot surface ignitor with flame safety
device.
Control Panel: Located on front, at right side of oven. Removable panel pulls out for easy servicing.
Interior Lights: Two 40 watt high temperature recessed lamps
located within the oven cavity.
Legs: 6” stainless steel legs standard.
Note: Oven cannot be operated without fan in operation.
Blower Fan and Motor: 1/2hp, 2-speed motor, 1710/1120 r.p.m
Oven Heating: 52,000 BTU (NAT or LP). Oven heating is regulated by an adjustable thermostat control. Blower fan circulates
air within the cavity “scrubbing” heat to the oven interior for even
heat distribution within the cavity. Form TVGS/12SC Rev 9 (April/2014)
N13691 ‐ Los Chingones DTC
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
Page: 28
Southbend
Models:

TVGS/12SC
Item #28
TVGS/12SC
Dimensions - in [mm]
optional 6” casters shown
Full 180° Opening
Oven Interior (Per Deck)
Rack Clearance
Shipping Crate
MODEL
TVGS/12SC
Width
Depth
Height
Width
Depth
Width
Depth
Height
29”
(737)
21.5”
(546)
14”
(356)
28.25”
(718)
21”
(533)
57.50”
(1461)
45.50”
(1156)
45”
(1143)
UTILITY INFORMATION
Gas: • Standard Depth: 52,000 BTU (NAT or LP)
• One 1” female connection
• Required minimum inlet pressure:
- Natural gas 7” W.C.
- Propane gas 11” W.C.
ELECTRIC:
• Standard: 120/60/1 phase, furnished with 6’ cord w/3-prong plug (1 plug/deck). NEMA #5-15p. Total maximum amps 7.9.
• Optional: 208/60/1 (190-219 volts). Supply must be wired to junction box with terminal block located at rear. Total maximum amps 4.3.
• Optional: 240/60/ 1 or 3 (220-240 volts). Supply must be wired to junction box with terminal block located at rear. Total maximum amps 3.8.
• Optional: 240/50/ 1 or 3 (208-240 volts). Supply must be wired to junction box with terminal block located at rear. Total maximum amps 6.0.
Volume
Weight
68.1 cu. ft.
300 lbs
(1.93 cu. m.) (136.08 kg)
Miscellaneous
• If using flex hose connector, the I.D should not be smaller
than 1” and must comply with ANSI Z 21.69.
• If casters are used with flex hose, a restraining device
should be used to eliminate undue strain on the flex hose.
• Clearances from combustibles: Top-0”, bottom-0”, right
side-0” and left-2”
• Recommended- Install under vented hood
• Check local codes for fire and sanitary regulations
• If the unit is connected directly to the outside flue, an
A.G.A approved down draft diverter must be installed at
the flue outlet of the oven
• Oven cannot be operated without fan in operation
Notice: Southbend reserves the right to change specifications and product design without notice. Such revisions do
not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased
equipment.
* All units shipped single phase.
options and accessories
 List the voltage, frequency,
and amps required (see utility
information above).
_____VAC, ____Phase, ______Hz.
 Stainless steel rear jacket
 Stainless steel oven interior
 Stainless steel soild door
 Down draft diverter for direct flue
 12” stainless steel legs
 1” quick disconnect with flexible hose
 26” stainless steel legs
 Casters 4” or 6”
 Marine edge top
 Swivel Caster - front with locks
(specify length: 3ft, 4ft, or 5ft)
 Export crating
 Extra oven racks
 Bottom, roller bearing, sliding rack
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Form TVGS/12SC Rev 9 (April/2014)
N13691 ‐ Los Chingones DTC
Page: 29
Southbend
P36N‐SSS
Item #28
Spreader Cabinets
Sectional Spreader Cabinet
Job
Solid shelving has a depth of 10".
Tubed and Tray shelving have a
depth of 11-1/8".
Item#
Models
Width
A
Depth
Height
P12N-S
12”
(305)
37.5”
(953)
P12C-S
12”
(305)
P16N-S
Crate Size
Crated
Volume
Crated
Weight
42.5”
(1080)
10.3 cu ft
(0.29 cu m)
100 lb
(45 kg)
45”
(1144)
42.5”
(1080)
22.1 cu ft
(0.63 cu m)
121 lb
(54 kg)
20”
(508)
21”
(534)
42.5”
(1080)
10.3 cu ft
(0.29 cu m)
110 lb
(49 kg)
41”
(1041)
20”
(508)
45”
(1144)
42.5”
(1080)
22.1 cu ft
(0.63 cu m)
131 lb
(60 kg)
37.5”
(953)
13.5”
(343)
20”
(508)
21”
(534)
42.5”
(1080)
10.3 cu ft
(0.29 cu m)
120 lb
(55 kg)
18”
(406)
37.5”
(953)
41”
(1041)
20”
(508)
45”
(1144)
42.5”
(1080)
22.1 cu ft
(0.63 cu m)
141 lb
(64 kg)
P24N-SS
24”
(610)
37.5”
(953)
13.5”
(343)
39”
(991)
21”
(534)
44”
(1118)
23.5 cu ft
(.67 cu m)
150 lb
(68 kg)
P24C-SS
24”
(610)
37.5”
(953)
41”
(1041)
39”
(991)
42.5”
(1080)
44”
(1118)
42.2 cu ft
(1.2 cu m)
180 lb
(81 kg)
P32N-SS
32”
(812)
37.5”
(953)
13.5”
(343)
39”
(991)
21”
(534)
44”
(1118)
23.5 cu ft
(.67 cu m)
185 lb
(83 kg)
P32C-SS
32”
(812)
37.5”
(953)
41”
(1041)
39”
(991)
42.5”
(1080)
44”
(1118)
42.2 cu ft
(1.2 cu m)
220 lb
(99 kg)
P36N-SSS
36”
(914)
37.5”
(953)
13.5”
(343)
45.5”
(1156)
23”
(584)
55”
(1397)
33.3 cu ft
(0.95 cu m)
220 lb
(99 kg)
P36C-SSS
36”
(914)
37.5”
(953)
41”
(1041)
45.5”
(1156)
45”
(1143)
55”
(1397)
65.2 cu ft
(1.85 cu m)
260 lb
(117 kg)
Width
Height
Depth
13.5”
(343)
20”
(508)
21”
(534)
37.5”
(953)
41”
(1041)
20”
(508)
16”
(406)
37.5”
(953)
13.5”
(343)
P16C-S
16”
(406)
37.5”
(953)
P18N-S
18”
(406)
P18C-S
1100 Old Honeycutt Rd., Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Form PSC Rev 6 (August/2014)
N13691 ‐ Los Chingones DTC
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
Page: 30
Turbo Air
TSR‐49SD
Item #29
Project :
4184 E. Conant St.
Long Beach, CA 90808
Tel. 310-900-1000
Fax. 310-900-1077
www.turboairinc.com
more durable, efficient, beautiful
Model # :
Item # :
Qty :
Available W/H :
Approval :
Reach-In Bottom Mount
Solid Door Refrigerator
Super Deluxe Series
FEATURES & BENEFITS
Model : TSR-49SD
Digital temperature control system
Provides precise and constant temperature. This level of precision allows food
products to remain fresh over an extended period of time.
3
High-tech monitor
The unit will beep if the door has been opened for more than 30 seconds. The
monitor digitally displays the present temperature and current status of the
refrigerator. You can easily change the temperature by adjusting the thermostat.
YEAR PARTS & LABOR
WARRANTY
Stainless steel cabinet construction
The Turbo Air Super Deluxe model boasts a stainless steel interior and exterior
(galvanized steel top, bottom and back). It guarantees the utmost in cleanliness
and long product life. Unlike other companies’ products, the sharp corners and
edges have been rounded to reduce the risk of injury. The Super Deluxe can add a
touch of style to the most refined setting.
Sturdy, clean stainless steel shelving
Shelves are the most important part of cleanliness as they come in direct contact
with food. After a while, PVC coated wire shelves may peel, rust and lead to
unsanitary conditions. Only the Turbo Air Super Deluxe series uniquely provides
stainless steel shelving.
Turbo Cooling feature for faster chilling
The Turbo Cooling function, located on the control panel, allows the compressor to
run continuously for up to two hours. When this function is activated, the
temperature inside the cabinet quickly decreases and cools drinks, food, and other
products much faster. An ideal time to use the Turbo Cooling function is when the
unit is stocked with new products.
LED interior lighting system
Brighter and longer lasting LED lights provide attractive, enhanced illumination
compared to fluorescents. It saves energy by producing less heat, while maximizing
the visibility.
Door pressure release device
Pressure relief doors are designed to eliminates vacuum pressure and allows easy,
instant door opening.
Efficient refrigeration system
Turbo Air’s solid door refrigerators are designed with oversized and balanced (CFC
Free R-134A) refrigeration systems. These include efficient evaporators and
condensers for faster cooling and greater efficiency.
High-density polyurethane insulation
The entire cabinet structure and solid doors are foamed-in-place using high
density, CFC free polyurethane insulation.
Refrigerator holds 33°F ~ 38°F for the
best in food preservation
Automatic evaporator fan motor delays
When the door is opened the evaporator fan will stop, preventing the circulation
of hot and moist air from escaping into the refrigerator. This increases energy
efficiency and lengthens the life of the compressor.
Bottom mount compressor units
ENERGY STAR®
Qualified
Turbo Air’s bottom mount compressor allows easier access for service and extra
storage space above. In addition, the lower area provides a cooler and less greasy
operating environment which results in reduced compressor running time.
Compressor
3 YEAR
5 YEAR
WARRANTY
(U.S.A only)
Model
Swing
Door
CU./FT.
#of
Shelves
HP
AMPS
Crated
Weight (lbs.)
L x D x H*
TSR-49SD
2
49
6
1/3
9.2
427
543/8 x 303/8 x 781/4
Ver.201501
N13691 ‐ Los Chingones DTC
(inches)
* Height does not include 5” caster height or 6” optional legs.
Page: 31
Turbo Air
TSR‐49SD
Item #29
Reach-In Bottom Mount
Solid Door Refrigerator
Super Deluxe Series
Model : TSR-49SD
PLAN VIEW
(unit : inch)
ELECTRICAL DATA
115/60/1
Voltage
NEMA 5-15P
Plug Type
Full Load Amperes
9.2
Compressor HP
1/3
3
Feed Wires with Ground
9
Cord Length ft.
R-134A
Refrigerant
DIMENSIONAL DATA
# of Doors
2
# of Racks Accepted
2
FRONT VIEW
49
Ext. Depth Overall in.
303/8 (770mm)
Ext. Height Overall in.*
781/4 (1987mm)
Int. Length Overall in.
501/2 (1283mm)
Int. Depth Overall in.
261/4 (666mm)
Int. Height Overall in.
603/8 (1534mm)
543/8 (1382mm)
501/2 (1283mm)
231/8 (587mm)
231/8 (587mm)
251/2 (646mm)
427
Gross Weight lbs.
6
# of Shelves
243/8 x 231/4
Design and specifications subject to change without notice.
Actual shipping weight may differ due to extra packing materials for product protection.
* Height does not include 5” caster height or 6” optional legs.
PLAN VIEW
3 Year Parts and Labor Warranty
Additional 2 Year Warranty on Compressor
6 1/2
Door locks standard
Positive seal self-closing doors
Easy replaceable one piece magnetic door gaskets
Self-contained system
Standard 4” swivel casters with locks on the front set
Solid and sturdy grille design
Legs available for all models (optional)
Full and half pan racks available (optional)
Remote cabinets & condensing units available
303/8 (770mm)
OPTIONAL ACCESSORIES :
5” Diameter swivel casters
6” Standard legs
Additional stainless steel shelves
Additional PE coated wire shelves
Half door bun tray racks. Each holds up to seven
18”Lx26”D sheet pans (sold separately)
Full door bun tray racks. Each holds up to fifteen
18”Lx26”D sheet pans (sold separately)
Remote cabinets and condensing units
(Extra lead times may apply)
50 5/8 (1285mm)
78 1/4 (1987mm)
24 3/4 (630mm)
26 1/4 (666mm)
53 1/2 (1360mm)
Shelf Size (LxD) in.
82 3/4 (2103mm)
543/8 (1382mm)
303/8 (770mm)
Ext. Length Overall in.
77 (1956mm)
Net Capacity cu. ft.
11/4 (31mm)
5 3/4 (147mm)
SIDE VIEW
Ver.201501
Compressor
3 YEAR
5 YEAR
WARRANTY
(U.S.A only)
N13691 ‐ Los Chingones DTC
ENERGY STAR®
Qualified
Turbo Air : 800-627-0032
Warranty : 800-381-7770
GK : 800-500-3519
AC : 888-900-1002
Page: 32
Pitco
45C+S
Item #31
Project
Item No.
Model 35C+ & 45C+ Economy
Tube Fired Gas Fryers
Quantity
STANDARD SPECIFICATIONS
CONSTRUCTION
 Welded tank with an extra smooth peened finish
ensures easy cleaning.
 Long-lasting, high-temperature alloy stainless steel
heat baffles are mounted in the heat exchanger
tubes to provide maximum heating and
combustion efficiency.
 Standing pilot light design provides a ready flame
when heat is required.
 Cabinet front and door are constructed of stainless
steel with galvanized sides and back.
STANDARD ACCESSORIES










Cabinet - stainless steel front, door
Galvanized sides and back
Tank - mild steel with stainless front
Built-in integrated flue deflector
Two nickel plated oblong, wire mesh baskets
One nickel-plated tube rack
One drain extension
One drain line clean-out rod
Removable basket hanger for easy cleaning
6” (15.2 cm) adjustable legs
CONTROLS
 Thermostat maintains selected temperature
automatically between 200°F (93°C) and 400°F
(190°C-CE).
 Integrated gas control valve acts as a manual
and pilot valve, automatic pilot valve, gas filter,
pressure regulator (for gas pressure higher then
½ psi needs external regulator), and automatic
main valve.
 Gas control valve prevents gas flow to the main
burner until pilot is established and shuts off all
gas flow automatically if the pilot flame goes out.
 Temperature limit switch safely shuts off all gas
flow if the fryer temperature exceeds the upper
limit.
OPERATIONS
 Front 1-1/4” (3.2 cm) NPT drain for quick draining.
 Standing pilot and thermostat maintain temperature
automatically at the selected temperature
(between 200°F (93°C) and 400°F (190°C-CE)).



AVAILABLE OPTIONS & ACCESSORIES
 Tank Stainless Steel
Triple baskets
 Covers
 Fryer cleaner
Casters


Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 •1509 Route 3A, Bow NH 03304, USA
(603) 225-6684 • Fax (603) 225-8472 • www.pitco.com
L10-144 Rev 11 (10/12)
N13691 ‐ Los Chingones DTC
Page: 33
Pitco
45C+S
Item #31
Model 35C+ & 45C+ Economy
Tube Fired Gas Fryers
ELECTRICAL
OIL CAPACITY
35-40 lbs (15.9 - 18.1 kg)- Model 35C+
No Electrical options available
42-50 lbs (19.1 - 22.7 kg)- Model 45C+
SHIPPING INFORMATION (Approximate)
161 lbs (73 kg) / 17.0 cubic feet (0.48 cubic meters) Model 35C+
181 lbs (82 kg) / 17.0 cubic feet (0.48 cubic meters) Model 45C+
GAS CONSUMPTION
PERFORMANCE CHARACTERISTICS
90,000 BTU's/Hour (26.3 kW)
122,000 BTU's/Hour (35.7 kW)
Available in Natural or Propane Gas. For
other Fuel types contact your Dealer/Distributor.
Gas requirement for Incoming Pressure
Cooks 63 lbs. (29.9 KG) of fries per hour.-Model 35C+
Cooks 66 lbs. (28.6 KG) of fries per hour.-Model 45C+
Frying area is 14" x 14" (35.6 x 35.6 cm)
NATURAL
7 - 9 inches
PROPANE
11 - 12 inches
SHORT FORM SPECIFICATION
Provide Pitco 35C+, or 45C+ tube-fired gas fryer. Fryer shall have an atmospheric burner system
combined with three stainless steel tubes (Model 45C+ has four tubes) utilizing high temperature
alloy stainless steel baffles. Fryer shall have a deep cool zone; minimum 20% of total oil capacity.
Fryer cooking area shall be 14" x 14" (35.7 x 35.7 cm) with a cooking depth of 2-3/4" (7.00 cm). Model
45C+ has cooking depth of 4" (10.16 cm). Heat transfer area shall be a minimum of 588 square
inches (3794 sq cm) for 35C+. Heat transfer area shall be a minimum of 785 square inches (5058
sq cm) for 45C+. Provide accessories as follows:
TYPICAL APPLICATION
Frying a w ide variety of foods in a limited amount of space. Frying that requires a high volume production rate.
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 •1509 Route 3A, Bow NH 03304, USA
Phone • (603) 225-6684 • Fax (603) 225-8472 • www.pitco.com L10-144 Rev 11 (10/12) Printed in the USA
We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.
N13691 ‐ Los Chingones DTC
Page: 34
True
T‐23
Item #36
TRUE FOOD SERVICE
EQUIPMENT, INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400
Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Model:
T-23
AIA #
Project Name:
Location:
Item #:
SIS #
Qty:
Model #:
T-Series:
Reach-In Solid Swing Door Refrigerator
T-23
True’s solid door reach-in’s are
designed with enduring quality
that protects your long term
investment.
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower
utility costs, exceptional food
safety and the best value in
today’s food service marketplace.
Oversized, factory balanced,
refrigeration system holds 33°F to
38°F (.5°C to 3.3°C) for the best in
food preservation.
Stainless steel solid door and
front. The finest stainless
available with higher tensile
strength for fewer dents and
scratches.
Adjustable, heavy duty PVC
coated shelves.
Positive seal self-closing door.
Lifetime guaranteed door hinges
and torsion type closure system.
Bottom mounted units feature:
”No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest,
most grease free area of kitchen.
Easily accessible condenser coil
Scan code
for video
ROUGH-IN DATA
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
(mm)
Model
T-23
for cleaning.
Doors
Shelves
L
D
H*
HP
Voltage
1
3
27
291/2
783/8
1/3
115/60/1
686
750
1991
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
APPROVALS:
TRUE REFRIGERATION®
MADE IN
U.S.A.
1/4
230-240/50/1
Cord
Length
NEMA (total ft.)
Amps Config. (total m)
7.6
2.4
5-15P
▲
9
2.74
N13691 ‐ Los Chingones DTC
290
132
▲Plug type varies by country.
AVAILABLE AT:
SINCE 1945
10/14
Crated
Weight
(lbs.)
(kg)
Printed in U.S.A.
Page: 35
True
Model:
T-23
T‐23
Item #36
T-Series:
Reach-In Solid Swing Door Refrigerator
STANDARD FEATURES
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Extra large evaporator coil balanced with higher
horsepower compressor and large condenser;
maintains 33°F to 38°F (.5°C to 3.3°C) for the
best in food preservation.
• Sealed, cast iron, self-lubricating evaporator
fan motors and larger fan blades give True
reach-in’s a more efficient low velocity, high
volume airflow design. This unique design
ensures faster temperature recovery and
shorter run times in the busiest of food service
environments.
• Bottom mounted condensing unit positioned
for easy maintenance. Compressor runs in
coolest and most grease free area of the kitchen.
Allows for storage area on top of unit.
CABINET CONSTRUCTION
• Exterior - Stainless steel front. Anodized quality
aluminum ends, back and top.
• Interior - attractive, NSF approved, white
aluminum liner. Stainless steel floor with coved
corners.
• Insulation - entire cabinet structure and solid
door are foamed-in-place using Ecomate. A high
density, polyurethane insulation that has zero
ozone depletion potential (ODP) and zero global
warming potential (GWP).
• Welded, heavy duty steel frame rail, black
ELECTRICAL
• Unit completely pre-wired at factory and ready
for final connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.
powder coated for corrosion protection.
• Frame rail fitted with 4" (102 mm) diameter stem
castors - locks provided on front set.
DOOR
• Stainless steel exterior with white aluminum
liner to match cabinet interior. Door extends full
width of cabinet shell. Door locks standard.
• Lifetime guaranteed recessed door handle. Door
fitted with 12" (305 mm) long recessed handle
that is foamed-in-place with a sheet metal
interlock to ensure permanent attachment.
• Positive seal self-closing door. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gasket of one piece construction,
removable without tools for ease of cleaning.
SHELVING
• Three (3) adjustable, heavy duty PVC coated
wire shelves 22 7/8"L x 23 1/4"D (582 mm x
591 mm). Four (4) chrome plated shelf clips
included per shelf.
• Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on 1/2"
(13 mm) increments.
LIGHTING
• Incandescent interior lighting - safety shielded.
Lights activated by rocker switch mounted
above door.
MODEL FEATURES
• Exterior temperature display.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• NSF-7 compliant for open food product.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑❑ 230 - 240V / 50 Hz.
❑❑ 6" (153 mm) standard legs.
❑❑ 6" (153 mm) seismic/flanged legs.
❑❑ Alternate door hinging (factory installed).
❑❑ Additional shelves.
❑❑ Half door bun tray racks. Each holds up to
eleven 18"L x 26"D (458 mm x 661 mm) sheet
pans (sold separately).
❑❑ Full door bun tray rack. Holds up to twenty-two
18"L x 26"D (458 mm x 661 mm) sheet pans
(sold separately).
❑❑ Remote cabinets (condensing unit supplied
by others; system comes standard with 404A
expansion valve and requires R404A refrigerant).
Consult factory technical service department for
BTU information. All remote units must be hard
wired during installation.
PLAN VIEW
WARRANTY*
Three year warranty on all parts METRIC DIMENSIONS ROUNDED UP TO THE
and labor and an additional 2 year
NEAREST WHOLE MILLIMETER
warranty on compressor.
(U.S.A. only)
SPECIFICATIONS SUBJECT TO CHANGE
*RESIDENTIAL APPLICATIONS: TRUE assumes no liability for parts or
labor coverage for component failure or other damages resulting
from installation in non-commercial or residential applications.
WITHOUT NOTICE
KCL
Model
Elevation Right
Plan
3D
T-23
TFEY53E
TFEY03P
TFEY633
TFEY03S
Back
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 • Fax (636)272-2408 • Toll Free (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
N13691 ‐ Los Chingones DTC
Page: 36
Town
57137
Item #37
RICEMASTER ELECTRONIC RICE COOKERS
equipment
Electronic
56822 25 Cups, 120v*
56824 25 Cups, 230v*
57137 37 Cups, 120v*
57138 37 Cups, 230v*
57155 55 Cups, 230v*
* refer to chart for liquid capacities (pg.57)
Electronic controls and sensors replace manual
switches. Customers report better rice quality and
more dependable performance.
Features
• Electronic Cook and Hold
• On/Off Touch Switch with power indicator
• Auto reset overheat protection
• Dent resistant 1/8” thick rice pot
• Three capacities: 25, 37, and 55 cup
• NSF listed for cook and hold
• Can be used with steamers
• Two Year Limited Warranty
(warranty starts from Town’s date of invoice)
Additional features include a stainless steel cover,
oil/water/grease resistant 14 gauge 3 wire electric
power cord, rice cup and paddle. The electronic
control is water resistant. Separate sensors regulate the cook and hold cycles giving precise temperature control. New style coil relay added for
more consistent results.
This is a field tested rice cooker that has brought
unsolicited praise from users. It will cook different kinds of rice: long grain, short grain, sushi,
brown, Basmati, Texmati, etc. with good results.
Other Uses
The Owner’s Manual includes recipes for Rice
Pilaf and Jambalaya.
model
type
56822 25 cup, 120 volt
56824 25 cup, 230 volt
57137 37 cup, 120 volt
57138 37 cup, 230 volt
57155 55 cup, 230 volt
Replacement Rice Pots
56844 25 cup replacement rice pot
57139 37 cup replacement rice pot
57155P 55 cup replacement rice pot
wt
15 lb
21 lb
29 lb
5 lb
6 lb
9 lb
48
TOWN FOOD SERVICE EQUIPMENT CO., INC. • 72 BEADEL ST. • BKLYN • NY 11222
N13691 ‐ Los Chingones DTC
Page: 37
Town
57137
Item #37
RICEMASTER ELECTRONIC RICE COOKERS
cook
capacities‡
sizes
no.
watts
volts amps
Hz
time*
raw rice
cooked rice diam† x height
56822 1700
120
14
60
31 min
8 lb (25 cups) 19 lb (50 cups)
1
43/4” x 12”
56824 1500
230
7
50/60
44 min
57137 2160
120
18
60
43 min
13 lb (37 cups) 28 lb (74 cups) 153/4” x 123/4”
57138 1950
230
9
50/60
48 min
57155 3330
230
15
50/60
46 min 18 lb (55 cups) 42 lb (110 cups) 19” x 151/2”
no.
liquid cap(qts) carton size
cu ft units/carton ship wt
color ł cord length
56822/4
11
35” x 17” x 12” 4.2
2
30 lb
57137/8
131/4
18” x 18” x 13” 2.5
1
21 lb
mustard
72”
57155
211/2
21” x 21” x 16” 3.7
1
31 lb
* for better rice, allow 10 additional minutes for rice to cure after cooking
Features
† add 3” for handles
equipment
Specifications
‡Capacities are approximate
ł white is no longer available.
• Durable
Reinforced body, extra-thick heater plate and water resistant controller gives longer unit life.
• Fast
• Overheat Protection
The high limit control prevents heating element damage or failure due to a dented pot.
• Touch Controls & Indicator lights
First touch the ON/OFF button and the unit turns on in the “hold” mode. Both the power and the
hold indicator lights will be illuminated. A touch to the PRESS TO COOK button starts the cook
cycle. The hold light will go out and the cook light will illuminate. When the rice is cooked the
cook light will go out and the hold light will illuminate, indicating the rice is cooked. Unit stays
in warm mode until turned off or another cook cycle is started. Touch the power button at any
time to turn the unit off.
• Automatic Cook and Hold Operation. Touch the Button, Walk Away for Perfect Rice Every Time
An electronic sensor detects when the water has been absorbed to end the cook cycle. RiceMaster® switches to “hold” automatically when cooking is done. Rice will be held at an NSF compliant 150ºF+. Holding time should not exceed 5 hours.
• 1/8” thick Lift Out Rice Pot
Resists dents, removable for washing rice and cleaning.
• Cup Capacity is Asian cups
Rice cooker capacity in Asia is measured by 6 ounce (by volume) cups of raw rice. Town RiceMasters use that standard. We also provide capacity by weight above.
• Commercial ETL and NSF listed
Large capacity rice cookers designed and built for commercial use.
• Can be used as a steamer
Put a steamer on top for steaming crabs or Mexican tortillas.
• Two Year Warranty (page 111)
Electric RiceMasters accept aluminum steamers (page 91):
no.
description
steamer
adapter ring
56822/24 25 cup rice cooker
12”
not required
57137/38 37 cup rice cooker
14”
not required
57155
55 cup rice cooker
16”
no. 57155A
49
(718) 388-5650 (800) 221-5032
N13691 ‐ Los Chingones DTC
fax: (718) 388-5860 www.townfood.com
Page: 38
Hatco
GRAH‐54D3
Item #40
ITEM#
GLO-RAY ®DUAL INFRARED FOODWARMERS
Models GRA-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D, -96D, -108D, -120D, -132D, -144D
GRAH-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D, -96D, -108D, -120D, -132D, -144D
Hatco Glo-Ray® Dual Infrared Foodwarmers
safely keep all hot foods at optimum serving
temperatures longer. Foods do not dry out or
become discolored; even delicate dishes hold
that “just-prepared” look. The Glo-Ray prefocused heat pattern directs heat from a
tubular element to bathe the entire holding
surface.
FLEXIBILITY
The continuous aluminum housings, up to
12' (3658 mm) in width, are very strong and
eliminate the danger of sagging.
The advanced Glo-Ray Dual Mounting feature
allows side-by-side mounting of two warmers
to provide a deeper holding area. A 3" or 6"
(76 or 152 mm) spacer is available. See
GRAL-XXD, GRAHL-XXD spec sheet for units
with lighting.
Toggle switches are standard with dual
foodwarmers. When selecting infinite
controls, they MUST be mounted remotely.
Remote control enclosures are available in
several sizes, built in accordance with UL
Standards to accommodate switches,
indicator lights and wiring, ready for
installation.
Optional sneeze guard that meet NSF
Standards can be ordered for display areas
and buffet lines. Made of shatterproof, easyto-clean acrylic, they provide a safe foodserving environment.
All models are available in powdercoated
Designer colors of Warm Red, Black, Gray
Granite, White Granite, Navy Blue, Hunter
Green, Antique Copper, or Gloss finishes
of Gleaming Gold, Glossy Gray, Bold Black,
Radiant Red, Brilliant Blue. The powdercoated
surfaces provide durability and are easy to
clean.
Model GRA-36D
with 3" (76 mm) spacer
Model GRAH-72D
with 3” (76 mm) spacer,
remote control required
Remote Control Enclosures
Model RMB-14D
with infinite controls
Model RMB-3F
with toggle
switch and
indicator light
QUALITY
The following features assure the finest
performance for years to come:
• Available in widths from 18" to 12'
(457-3658 mm).
• Sturdy extruded aluminum housings
eliminate sagging.
• Pre-focused heat maintains safe serving
temperatures longer without continuing
to cook the food.
• Variety of models, configurations, colors,
and accessories provide unlimited flexibility.
Model GRAH-42D with 6” (152 mm)
spacer and optional non-adjustable
tubular stands
METAL SHEATHED ELEMENTS GUARANTEED AGAINST
BURNOUT AND BREAKAGE FOR TWO YEARS.
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607 • (414) 671-6350 • Fax (800) 543-7521 • Int’l. Fax (414) 671-3976
www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Printed in U.S.A.
Form No. GR-D Spec Sheet
N13691 ‐ Los Chingones DTC
January 2012
Page: 39
Hatco
GRAH‐54D3
Item #40
ITEM#
GLO-RAY ®DUAL INFRARED FOODWARMERS
Models GRA-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D, -96D, -108D, -120D, -132D, -144D
GRAH-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D, -96D, -108D, -120D, -132D, -144D
Power Location (36" (914 mm) flexible
metal conduit with 42" (1067 mm) leads)
2.5"
(64 mm)
18" thru 144" (457-3658 mm)
15" or 18"
(381 or 457 mm)
FRONT VIEW
END VIEW
Switch
SPECIFICATIONS
TOP VIEW
DIMENSIONS
Aluminum High Watt Aluminum Standard Watt
18"-144"W x 15" or 18"D x 2.5"H (457-3658 x 381 or 457 x 64 mm).
Model
GRAH-18D
GRAH-24D
GRAH-30D
GRAH-36D
GRAH-42D
GRAH-48D
GRAH-54D
GRAH-60D
GRAH-66DL
GRAH-72DL
GRAH-84D*
GRAH-96D*
GRAH-108D*
GRAH-120D*•
GRAH-132D*•
GRAH-144D*•
VOLTAGE
L
Watt
700
1000
1320
1600
1900
2200
2500
2800
3120
3450
4100
4800
5000
5600
6240
6900
Model
GRA-18D
GRA-24D
GRA-30D
GRA-36D
GRA-42D
GRA-48D
GRA-54D
GRA-60D
GRA-66D
GRA-72D
GRA-84DL
GRA-96DL
GRA-108D*
GRA-120D*•
GRA-132D*•
GRA-144D*•
Watt
500
700
900
1150
1350
1600
1850
2100
2320
2550
3000
3450
3700
4200
4640
5100
Width
ShippingWeight I
18" ( 457 mm) 14 lbs. ( 6 kg)
24" ( 610 mm) 16 lbs. ( 7 kg)
30" ( 762 mm) 18 lbs. ( 8 kg)
36" ( 914 mm) 21 lbs. (10 kg)
42" (1067 mm) 24 lbs. (11 kg)
48" (1219 mm) 27 lbs. (12 kg)
54" (1372 mm) 30 lbs. (14 kg)
60" (1524 mm) 34 lbs. (15 kg)
66" (1676 mm) 37 lbs. (17 kg)
72" (1829 mm) 41 lbs. (19 kg)
84" (2134 mm) 44 lbs. (20 kg)
96" (2438 mm) 52 lbs. (24 kg)
108" (2743 mm) 59 lbs. (27 kg)
120" (3048 mm) 66 lbs. (30 kg)
132" (3353 mm) 73 lbs. (33 kg)
144" (3658 mm) 80 lbs. (36 kg)
120 volts models with infinite switch require tandem (end-to-end) elements.
* Glo-Ray models 108" through 144" (2743-3658 mm) and 120 volt models of GRAH-84
and GRAH-96 contain tandem elements individually controlled.
• Not available in 120 volts.
I
Does not include RMB.
OPTIONS (NOT FOR RETROFIT)
K Designer Colors: Warm Red, Black, Gray Granite, White Granite, Navy
Blue, Hunter Green, Antique Copper
K Gloss Finishes: Gleaming Gold, Glossy Gray, Bold Black, Radiant Red,
Brilliant Blue
K 3" or 6" (76 or 152 mm) Spacer
K Indicator Light
K Tandem Element (End-to-end)
K Sneeze Guard (one- or two-sided)
K Extended Electrical Leads
K Infinite Control† (Remote Required with Duals)
120, 208 or 240 volts, single phase.
Export voltages available.
REMOTE CONTROL ENCLOSURES
Model
RMB-3
RMB-7
RMB-14
RMB-16
RMB-20
Width
5.5" (140 mm)
9" (229 mm)
14" (356 mm)
16" (406 mm)
20" (508 mm)
Toggle Switches
2 Maximum
4 Maximum
6 Maximum
3 Maximum
3 Maximum
ONE CONTROL BOX PER FOODWARMER.
MOUNTING REQUIREMENTS
Recommended Mounting Height –
Standard Watt: 10"-14" (254-356 mm)
High Watt: 14"-18" (356-457 mm)
MINIMUM SPACING –
May not be installed in combustible surroundings.
Non-combustibles: 1" (25 mm) above, 10" (254 mm) below.
Must be installed in pass through area. Units with remote switches may
be installed 3" (76 mm) from a non-combustible back wall, 8" (203 mm)
to surface below, and flush to an overshelf. Maximum 10" (254 mm)
setback from the front of an overshelf.
K Remote Control Enclosure
K Adjustable Tubular Stands 10"-14" (254-356 mm)
K Non-Adjustable Tubular Stands 10", 12", 14", or 16"
(254, 305, 356, or 406 mm) – Available in Designer colors
†
Maximum of 12.2 amps. Consult factory if rating of single element at
120 volts exceeds 1400 watts.
ACCESSORIES
K Adjustable Angle Brackets (Provides 1" – 2" (25-51 mm) clearance
above unit)
K Chain Suspension
PRODUCT SPECS
Dual Infrared Foodwarmer
The Dual Infrared Foodwarmer shall be a Glo-Ray®, manufactured
by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 parts and service assistance (U.S. and Canada only), the
Foodwarmer shall be a Glo-Ray Model ... , rated at ... watts, ... volts,
single phase, and be ... inches (millimeters) in overall width.
The Glo-Ray shall consist of an aluminum housing and include four
shelf mounting tabs, and 3’ conduit with leads.
The infrared heating element shall be tubular metal sheathed. The
foodwarmer shall be factory-assembled ready for
electrical installation.
Options and accessories shall include adjustable or non-adjustable
tubular stand, angle brackets, suspension chain and fittings, sneeze
guard and indicator light.
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. GR-D Spec Sheet
N13691 ‐ Los Chingones DTC
Printed in U.S.A.
January 2012
Page: 40
Hatco
RMB‐3E
Item #40
ITEM#
GLO-RAY
®
DUAL INFRARED FOODWARMERS
Models GRA-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D, -96D, -108D, -120D, -132D, -144D
GRAH-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D, -96D, -108D, -120D, -132D, -144D
Hatco Glo-Ray® Dual Infrared Foodwarmers
safely keep all hot foods at optimum serving
temperatures longer. Foods do not dry out or
become discolored; even delicate dishes hold
that “just-prepared” look. The Glo-Ray prefocused heat pattern directs heat from a
tubular element to bathe the entire holding
surface.
FLEXIBILITY
The continuous aluminum housings, up to
12' (3658 mm) in width, are very strong and
eliminate the danger of sagging.
The advanced Glo-Ray Dual Mounting feature
allows side-by-side mounting of two or more
warmers to provide a deeper holding area. A
3" or 6" (76 or 152 mm) spacer is available as
well as shatter-resistant incandescent lights
that illuminate the warming area.
Toggle switches are standard with dual
foodwarmers. When selecting infinite
controls, they MUST be mounted remotely.
Remote control enclosures are available in
several sizes, built in accordance with UL
Standards to accommodate switches,
indicator lights and wiring, ready for
installation.
Optional sneeze guard that meet NSF
Standards can be ordered for display areas
and buffet lines. Made of shatterproof, easyto-clean acrylic, they provide a safe foodserving environment.
All models are available in powdercoated
Designer colors of Warm Red, Black, Gray
Granite, White Granite, Navy Blue, Hunter
Green, Antique Copper, or Gloss finishes
of Gleaming Gold, Glossy Gray, Bold Black,
Radiant Red, Brilliant Blue. The powdercoated
surfaces provide durability and are easy to
clean.
Model GRA-36D
with 3" (76 mm) spacer
Model GRAL-36D with
3" (76 mm) spacer and
optional lights
Model GRAHL-72D with optional
Designer color, 3" (76 mm) spacer,
lights and tandem elements
Remote Control Enclosures
Model RMB-14D
with infinite controls
Model RMB-3F
with toggle
switch and
indicator light
QUALITY
The following features assure the finest
performance for years to come:
• Available in widths from 18" to 12'
(457-3658 mm).
• Sturdy continuous aluminum housings
eliminate sagging.
• Pre-focused heat maintains safe serving
temperatures longer without continuing
to cook the food.
• Variety of models, configurations, colors,
and accessories provide unlimited flexibility.
• Optional coated shatter-resistant
incandescent lights enhance brilliant
product display while safeguarding food
from bulb breakage.
METAL SHEATHED ELEMENTS GUARANTEED AGAINST
BURNOUT AND BREAKAGE FOR TWO YEARS.
Model RMB-7D with
optional Designer color
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607 • (414) 671-6350 • Fax (800) 543-7521 • Int’l. Fax (414) 671-3976
www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Printed in U.S.A.
Form No. GR-D Spec Sheet
N13691 ‐ Los Chingones DTC
February 2009
Page: 41
Hatco
RMB‐3E
Item #40
ITEM#
GLO-RAY
®
DUAL INFRARED FOODWARMERS
Models GRA-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D, -96D, -108D, -120D, -132D, -144D
GRAH-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D, -96D, -108D, -120D, -132D, -144D
Power Location (36" (914 mm) flexible
metal conduit with 42" (1067 mm) leads)
2.5"
(64 mm)
18" thru 144" (457-3658 mm)
15" or 18"
(381 or 457 mm)
FRONT VIEW
END VIEW
Switch
SPECIFICATIONS
DIMENSIONS
Aluminum High Watt Aluminum Standard Watt
Model
GRAH-18D
GRAH-24D
GRAH-30D
GRAH-36D
GRAH-42D
GRAH-48D
GRAH-54D
GRAH-60D
GRAH-66D▲
GRAH-72D▲
GRAH-84D*
GRAH-96D*
GRAH-108D*
GRAH-120D*•
GRAH-132D*•
GRAH-144D*•
▲
Watt
700
1000
1320
1600
1900
2200
2500
2800
3120
3450
4100
4800
5000
5600
6240
6900
Model
GRA-18D
GRA-24D
GRA-30D
GRA-36D
GRA-42D
GRA-48D
GRA-54D
GRA-60D
GRA-66D
GRA-72D
GRA-84D▲
GRA-96D▲
GRA-108D*
GRA-120D*•
GRA-132D*•
GRA-144D*•
Watt
500
700
900
1150
1350
1600
1850
2100
2320
2550
3000
3450
3700
4200
4640
5100
Width
Shipping Weight ■
18" ( 457 mm)
14 lbs. ( 6 kg)
24" ( 610 mm)
16 lbs. ( 7 kg)
30" ( 762 mm)
18 lbs. ( 8 kg)
36" ( 914 mm)
21 lbs. (10 kg)
42" (1067 mm)
24 lbs. (11 kg)
48" (1219 mm)
27 lbs. (12 kg)
54" (1372 mm)
30 lbs. (14 kg)
60" (1524 mm)
34 lbs. (15 kg)
66" (1676 mm)
37 lbs. (17 kg)
72" (1829 mm)
41 lbs. (19 kg)
84" (2134 mm)
44 lbs. (20 kg)
96" (2438 mm)
52 lbs. (24 kg)
108" (2743 mm) 59 lbs. (27 kg)
120" (3048 mm) 66 lbs. (30 kg)
132" (3353 mm) 73 lbs. (33 kg)
144" (3658 mm) 80 lbs. (36 kg)
120 volts models with infinite switch require tandem (end-to-end) elements.
* Glo-Ray models 108" through 144" (2743-3658 mm) and 120 volt models of GRAH-84
and GRAH-96 contain tandem elements individually controlled.
• Not available in 120 volts.
■
TOP VIEW
Does not include RMB.
OPTIONS (NOT FOR RETROFIT)
❑ Designer Colors: Warm Red, Black, Gray Granite, White Granite, Navy
Blue, Hunter Green, Antique Copper
❑ Gloss Finishes: Gleaming Gold, Glossy Gray, Bold Black, Radiant Red,
Brilliant Blue
❑ 3" or 6" (76 or 152 mm) Spacer
❑ Indicator Light
❑ Tandem Element (End-to-end)
❑ Sneeze Guard
❑ Incandescent Lights
❑ Halogen Bulbs in lieu of Standard Display Lights
❑ Extended Electrical Leads
18"-144"W x 15" or 18"D x 2.5"H (457-3658 x 381 or 457 x 64 mm).
VOLTAGE
120, 208 or 240 volts, single phase.
Models with Lights: 120, (3-wire), 120/208 and 120/240, single phase,
(4-wire). Export voltages available.
REMOTE CONTROL ENCLOSURES
Model
RMB-3
RMB-7
RMB-14
RMB-16
RMB-20
Width
5.5" (140 mm)
9" (229 mm)
14" (356 mm)
16" (406 mm)
20" (508 mm)
Toggle Switches
2 Maximum
4 Maximum
6 Maximum
3 Maximum
3 Maximum
ONE CONTROL BOX PER FOODWARMER.
MOUNTING REQUIREMENTS
Recommended Mounting Height –
Standard Watt: 10"-14" (254-356 mm)
High Watt: 14"-18" (356-457 mm)
MINIMUM SPACING –
May not be installed in combustible surroundings.
Non-combustibles: 1" (25 mm) above, 10" (254 mm) below.
Must be installed in pass through area. Units with remote switches may
be installed 3" (76 mm) from a non-combustible back wall, 8" (203 mm)
to surface below, and flush to an overshelf. Maximum 10" (254 mm)
setback from the front of an overshelf.
❑ Bright Annealed Lamp Reflector
❑ Infinite Control† (Remote Required with Duals)
❑ Remote Control Enclosure
†
Maximum of 12.2 amps. Consult factory if rating of single element at
120 volts exceeds 1400 watts.
ACCESSORIES
❑ Adjustable Tubular Stands 10"-14" (254-356 mm)
❑ Non-Adjustable Tubular Stands 10", 12", 14", or 16"
(254, 305, 356, or 406 mm) – Available in Designer colors
❑ Adjustable Angle Brackets (Provides 1" – 2" (25-51 mm) clearance
above unit)
❑ Chain Suspension
PRODUCT SPECS
Dual Infrared Foodwarmer
The Dual Infrared Foodwarmer shall be a Glo-Ray®, manufactured
by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 parts and service assistance (U.S. and Canada only), the
Foodwarmer shall be a Glo-Ray Model ...., rated at ....watts, ....volts, single
phase, and be ....inches (millimeters) in overall width.
The Glo-Ray shall consist of an aluminum housing and include four
shelf mounting tabs.
The infrared heating element shall be tubular metal sheathed. The
foodwarmer shall be factory-assembled ready for
electrical installation.
Options and accessories shall include adjustable or non-adjustable
tubular stand, angle brackets, suspension chain and fittings, sneeze
guard, indicator light, and incandescent lights.
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Printed in U.S.A.
Form No. GR-D Spec Sheet
N13691 ‐ Los Chingones DTC
February 2009
Page: 42
Delfield
N8018
Item #42
Item _____________________________________
Quantity _ ________________________________
N8000
CSI Section 11400
Approved _ _______________________________
Date _____________________________________
Drop-In Ice Cooled Cold Pan
Models
•
N8018
18” ice cooled cold pan
•
N8030
30” ice cooled cold pan
•
N8043
43” ice cooled cold pan
•
N8056
56” ice cooled cold pan
•
N8069
69” ice cooled cold pan
•
N8081
81” ice cooled cold pan
Standard Features
•
•
•
•
•
•
•
•
•
N8056
•
•
20-gauge stainless steel top construction
2 BF stainless steel interior liner
Sectional removable perforated bottoms
Adapter bars are provided standard for 12”
x 20” openings
Standard 1” plastic drain
High density environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global
Warming Potential) polyurethane foam
insulation throughout unit
Galvanized exterior body
Custom sizes available
Non-marring press fit top gasket is supplied
standard
NSF-2 certified
One year parts and 90 day labor standard
warranty
Options &
Accessories
•
•
Custom sizes and styles
Single or double service flip-up
sneezeguards
Specifications
Top is one piece 20-gauge stainless steel. Interior liner is
22-gauge stainless steel with integral V-stamped pan rest
and is creased to 1.00” (2.54 cm) diameter drain. Unit has a
sectional, removable perforated stainless steel false bottom
and is provided with adapter bars to allow placement of 12”
x 20” (30.5 cm x 50.8 cm) pans. Unit is supplied with 1” (2.54
cm) plastic drain to be installed by customer. Exterior housing
is 24-gauge galvanized steel. Unit is insulated with high
density closed cell environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
N13691 ‐ Los Chingones DTC
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Page: 43
N8000: Drop-In Ice Cooled Cold Pan
Project ___________________________________
Delfield
N8018
Item #42
56.24”
143cm
18.00”
46cm
30.75”
78cm
43.50”
110cm
Plan View
N8018
Plan View
N8030
Plan View
N8043
Plan View
N8056
13.68”
35cm
16.67”
42cm
26.43”
67cm
29.42”
75cm
39.18”
100cm
42.17”
107cm
51.93”
132cm
54.90”
139cm
Elevation View
N8018
Elevation View
N8030
Elevation View
N8043
Elevation View
N8056
26.00”
66cm
69.00”
175cm
81.75”
208cm
Plan View
N8069
Plan View
N8081
Drop-In Ice Cooled Cold Pan
26.00”
66cm
64.68”
164cm
67.67”
172cm
77.43”
197cm
80.42”
204cm
Elevation View
N8069
Elevation View
N8081
10.75” 9.35”
27cm 24cm
21.68”
55cm
24.75”
63cm
Side View
All Models
N8000
Specifications
Model
Counter Cutout Dimensions (D X L)
12” X 20” Pan Capacity
Shipping Weight
N8018
17.00” x 25.00” (43cm x 64cm)
1
37lbs/ 17kg
N8030
29.75” x 25.00” (76cm x 64cm)
2
100lbs/ 45kg
N8043
42.50” x 25.00” (108cm x 64cm)
3
118lbs/ 53kg
N8056
55.25” x 25.00” (140cm x 64cm)
4
145lbs/ 65kg
N8069
68.00” x 25.00” (173cm x 64cm)
5
164lbs/ 74kg
N8081
80.75” x 25.00” (205cm x 64cm)
6
190lbs/ 86kg
Delfield reserves the right to make changes to the design or specifications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
N13691 ‐ Los Chingones DTC
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSN8000
01/11
Page: 44
Wells
SS‐276TDU
Item #43
Job
Over 90 Years Of Quality Foodservice
Products And Service
Item No.
SS206 Series & SS226 Series
12”’ X 20” or 12” X 27” Single Well
Heavy Duty, Top Mount
Rectangular Drop-In Food Warmers
STANDARD FEATURES
Model SS206
DESCRIPTION
Wells SS206 Built-In Rectangular Food Warmers are designed
for top mount installation and to hold heated foods at safe and
fresh serving temperatures. Wells SS206 Series accommodates
one 12” X 20” standard food pans or equivalent fractional inset
pans while the 12” X 27” extra-deep models hold four-each 1/3
size pans or equivalent fractional pans. Both are designed for wet
or dry operation.
SPECIFICATIONS
Construction – One-piece stainless steel top flange and heavygauge, deep-drawn stainless steel warming pans are standard
features on all models. Wellsloks are standard for quick and easy
installation.
Controls & Heating- Individual controls for each well provide
maximum versatility. Models with thermostatic or infinite controls
are available. High-limits prevent overheating. Temperature-ready
indicator lights are standard on all control types. Powerful tubular
heating elements are located under the warming pans for quick
and efficient heating and for even heat distribution.
Additional Features Available
• Drains
• Infinite or thermostatic controls
❏ SS206 models accommodate one 12” X 20” standard inset
pans or equivalent fractional pans
❏ SS226 models accommodates 4 each 1/3-size pans or
equivalent fractional pans
❏ One-piece stainless steel top flange and heavy-gauge, deepdrawn stainless steel warming pans
❏ Suitable for wet or dry operation (wet recommended for best
results)
❏ Thermostatic or infinite controls
❏ Separate controls for each individual wells
❏ High limits prevent overheating
❏ Thermostatic controls are recessed in a one-piece, drawn,
front-mounted panel
❏ Wellslok standard for ease of installation
❏ Powerful tubular heating elements
❏ ½” drains available
❏ 2-Year Limited Parts & 1-Year Limited Labor Warranty
OPTIONS & ACCESSORIES
❏ Optional 72”wiring
❏ 8oz. soup ladle
❏ Drain screens
❏ Drain value extension kit, extension from drain to counter
front with remote handle, for use with “D” models only, 20385
❏ Wellslok extension kits for wood counter installations up to 1”
thick, refer to installation instructions, 22593
❏ Adapter Top, to convert SS206 models to hold two 7-quart
insets, 20176
❏ Adapter Top, to convert SS206 models to hold two 4-quart
insets and two 2 1/2-quart insets, 20434
❏ Adapter Top, to convert SS206 models to hold one 7-quart
and one 11-quart inset, 21621
❏ Adapter Top, to convert SS206 models to hold three 4-quart
insets, 21615
❏ Adapter Top, to convert SS206 models to hold four
2-1/2-quart insets, 21624
❏ Adapter Top, to convert SS206 models to hold one 4-quart
and one 7-quart inset, 21617
❏ Adapter Top, to convert SS276ULT models to hold three
7-quart insets, 22589
❏ Inset, 2 1 /2-quart capacity with lid, 20773
❏ Inset, 4-quart capacity with lid, 20774
❏ Inset, 7-quart capacity with lid, 20587
❏ Inset, ll-quart capacity with lid, 20908
CERTIFICATIONS
R
Wells Bloomfield · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomfield.com © 2012 Wells Bloomfield · Printed in the U.S.A.
N13691 ‐ Los Chingones DTC
F
Sheet No. SS206-12/12
NOTE: Specifications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Page: 45
Wells
SS‐276TDU
Item #43
SS206 Series & SS226 Series
12”’ X 20” or 12” X 27” Single Well
Heavy Duty, Top Mount
Rectangular Drop-In Food Warmers
Over 90 Years Of Quality Foodservice
Products And Service
SS276ULT
SS206ULTD
SS206D
N
Minimum Clearance
OTE:
Specifications are subject to change without notice and are not intended for
installation purposes. See installation instructions prior to installing the unit.
BOTTOM
6-3/4
(171)
SIDE
2
(51)
BACK
2
(51)
FRONT*
4-1/8
(105)
SPECIFICATIONS
Model
Number
Description
Volts
Watts
Phase
AMPS
OVERALL
Width
OVERALL
Length
Left to Right
Front to Back
Inches
(MM)
Inches
(MM)
OVERALL
Height
Inches
(MM)
CONTROL
PANEL
Width
Inches
(MM)
CONTROL
PANEL
Height
Inches
(MM)
Shipping
Weights
Pounds
(KG)
Crate Size
Cubic Feet
(Cubic
Meters)
Approvals
RC
R
R
R
R
R
F
U
U
R
R
F
U
U
SS206-120
Infinite control no
drain
120V
1200
1Ø
10
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
3-5/16
(84)
4-7/16
(113)
16
(7)
2.9
(0.082)
SS206
Infinite control no
drain
208/240V
900/1200
1Ø
4.3/5.0
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
3-5/16
(84)
4-7/16
(113)
16
(7)
2.9
(0.082)
SS206D-120
Infinite control with
drain
120V
1200
1Ø
10
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
3-5/16
(84)
4-7/16
(113)
16
(7)
2.9
(0.082)
SS206D
Infinite control with
drain
208/240V
900/1200
1Ø
4.3/5.0
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
3-5/16
(84)
4-7/16
(113)
16
(7)
2.9
(0.082)
SS206T-120
Thermostatic
controls no drain
120V
1200
1Ø
10
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
16
(7)
2.9
(0.082)
SS206T
Thermostatic
controls no drain
208/240V
900/1200
1Ø
4.3/5.0
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
16
(7)
2.9
(0.082)
SS206ET-230
Thermostatic
controls no drain
220/240V
1200
1Ø
5.2
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
16
(7)
2.9
(0.082)
SS206TU-120
Thermostatic
controls no drain
120V
1650
1Ø
13.75
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
20
(9)
4.15
(0.117)
SS206TU
Thermostatic
controls no drain
208/240V
1240/1650
1Ø
6/6.9
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
20
(9)
4.15
(0.117)
SS206TD-120
Thermostatic
controls with drain
120V
1200
1Ø
10
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
15
(7)
2.9
(0.082)
SS206TD
Thermostatic
controls with drain
220/240V
900/1200
1Ø
4.3/5
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
15
(7)
2.9
(0.082)
SS206TD-230
Thermostatic
controls with drain
220/240V
1200
1Ø
5.2
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
15
(7)
2.9
(0.082)
SS206TDU-120
Thermostatic
controls with drain
120V
1650
1Ø
13.75
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
21
(10)
4.15
(0.117)
SS206TDU
Thermostatic
controls with drain
208/240V
1240/1650
1Ø
6/6.9
13-11/16
(346)
21-3/4
(552)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
21
(10)
4.15
(0.117)
Extra Deep 12” by 27” opening for 4 each 1/3 Size pans
SS276TU-120
Thermostatic
controls no drain
120V
1650
1Ø
13.75
13-11/16
(346)
28-1/2
(724)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
22
(10)
3.85
(0.109)
SS276
Thermostatic
controls no drain
208/240V
1240/1650
1Ø
6/6.9
13-11/16
(346)
28-1/2
(724)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
22
(10)
3.85
(0.109)
SS276TDU-120
Thermostatic
controls with drain
120V
1650
1Ø
13.75
13-11/16
(346)
28-1/2
(724)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
22
(10)
3.85
(0.109)
SS276TDU
Thermostatic
controls with drain
208/240V
1240/1650
1Ø
6/6.9
13-11/16
(346)
28-1/2
(724)
8-11/16
(221)
5-7/8
(149)
6-1/4
(159)
22
(10)
3.85
(0.109)
U
U
U
U
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Wells exercises good faith
efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the
information provided, the user assumes all risks in connection with such use.
Wells Bloomfield · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomfield.com © 2012 Wells Bloomfield · Printed in the U.S.A.
N13691 ‐ Los Chingones DTC
NOTE: Specifications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Page: 46
Wells
MOD‐100
Item #44
Job
Over 90 Years Of Quality Foodservice
Products And Service
Item No.
MOD100 Series
12” X 20” Single -Well
Heavy Duty, Top-Mount,
Rectangular Drop-In Food-Warmers
STANDARD FEATURES
Model MOD100
DESCRIPTION
Wells heavy-duty, top-mount, drop-in, Modular food warmers
are designed to hold heated foods at safe and fresh serving
temperatures. Wells MOD100 Series accommodates one 12” X
20”standard food pans or equivalent fractional inset pans and are
designed for wet or dry operation.
SPECIFICATIONS
Construction – One-piece stainless steel top flange and heavygauge, deep-drawn stainless steel warming pans are standard
features on all models. Wellsloks are standard for quick and easy
installation.
Insulation – Sides, front, back and bottom are fully insulated for
energy savings, efficiency, quicker pre-heat and faster recovery.
❏ Accommodates one 12” X 20” standard inset pans or
equivalent fractional pans
❏ One-piece stainless steel top flange and heavy-gauge, deepdrawn stainless steel warming pans
❏ Suitable for wet or dry operation (wet recommended for best
results)
❏ Energy-saving fully-insulated construction
❏ Fully insulated models are perfect for non-metal counters
❏ Thermostatic or infinite controls
❏ Separate controls for each individual wells
❏ High limits prevent overheating
❏ Thermostatic controls are recessed in a one-piece, drawn,
front-mounted panel
❏ Wellslock standard for ease of installation
❏ Powerful tubular heating elements
❏ ½” drains and manifolds available
❏ Cords & plugs available
❏ 2-Year Limited Parts & 1-Year Limited Labor Warranty
OPTIONS & ACCESSORIES
❏ Adaptor tops for round insets
❏ Inset with lid
❏ 8oz. soup ladle
❏ Drain value extension kit
❏ Drain screens
❏ Wellslok extension kits for wood counter installations
❏ 6’ cords and plugs are available on all 120V models
❏ 6” cords and plugs are available on all 208/240V models
❏ Optional 72”wiring
CERTIFICATIONS
Controls & Heating- Individual controls for each well provide
maximum versatility. Models with thermostatic or infinite controls
are available. High-limits prevent overheating. Temperature-ready
indicator lights are standard on all control types. Powerful tubular
heating elements are located under the warming pans for quick
and efficient heating and for even heat distribution.
Additional Features Available
• Auto water-fill to maintain proper water level.
• Select models are field convertible from 3Ø to 1Ø
• Drains
• Drains with manifolds
• Cord & plugs available on thermostatically control models
• Infinite or thermostatic controls
Wells Bloomfield · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomfield.com © 2012 Wells Bloomfield · Printed in the U.S.A.
N13691 ‐ Los Chingones DTC
Sheet No. MOD1-11/12
NOTE: Specifications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Page: 47
Wells
MOD‐100
Item #44
MOD100 Series
12” X 20” Single -Well
Heavy Duty, Top-Mount,
Rectangular Drop-In Food-Warmers
Over 90 Years Of Quality Foodservice
Products And Service
OTE:
N
Specifications are
subject to change without
notice and are not intended
for installation purposes.
See installation instructions
prior to installing the unit.
SPECIFICATIONS
Model
Number
Description
Volts
Watts
Per
Well
Phase
Standard
Power
Cord
Supply
Optional
Power
Cord
Supply
OVERALL
Width
OVERALL
Length
Left to Right
Front to Back
Inches
(MM)
Inches
(MM)
OVERALL
Height
Inches
(MM)
CONTROL
PANEL
Width
CONTROL
PANEL
Height
Front to Back
Left to Right
Inches
(MM)
Inches
(MM)
Shipping
Weights
Crate Size
Pounds
(KG)
Cubic Feet
(Cubic
Meters)
Approvals
NU
NU
NC
NU
NU
NU
NU
MOD100-120
Infinite Controls no
Drains
120V
1200
1Ø
N/A
NEMA
5-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
MOD100
Infinite Controls no
Drains
208/240V
900/1200
1Ø
N/A
NEMA
6-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
MOD100CSA
Infinite Controls no
Drains
120V
240V
1200
1Ø
N/A
Not
Available
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
MOD100D-120
Infinite Controls
with Drains
120V
1200
1Ø
N/A
NEMA
5-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
MOD100D
Infinite Controls
with Drains
208/240V
900/1200
1Ø
N/A
NEMA
6-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
MOD100T-120
Thermostatic Controls no Drains
120V
1650
1Ø
NONE
NEMA
5-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
MOD100T
Thermostatic Controls no Drains
208/240V
1240/1650
1Ø
NONE
NEMA
6-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
MOD100T-230
Thermostatic Controls no Drains
220-240V
1650
1Ø
NONE
Not
Available
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
F
MOD100TD-120
Thermostatic Controls with Drains
120V
1650
1Ø
NONE
NEMA
5-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
MOD100TD
Thermostatic Controls with Drains
208/240V
1240/1650
1Ø
NONE
NEMA
6-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
NU
NU
MOD100TD-230
Thermostatic Controls with Drains
220/240V
1650
1Ø
NONE
Not
Available
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
5-7/8
(149)
6-1/4
(159)
24
(10.9)
4.5
(0.128)
F
MOD100TDAF
Thermostatic Controls with Drains
and Auto-Fill
208/240V
1240/1650
1Ø
NONE
NEMA
6-15P
13-3/4
(349)
21-3/4
(552)
9-3/4
(248)
14
(356)
6-1/4
(159)
30
(13.6)
4.5
(0.128)
NU
Cords and plugs are available on all 120V and on all 208/240V models (optional)
AutoFill models require a water connection. Please refer to the operator’s manual and installation instructions for details.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
specifications. By using the information provided, the user assumes all risks in connection with such use.
Wells Bloomfield · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomfield.com © 2012 Wells Bloomfield · Printed in the U.S.A.
N13691 ‐ Los Chingones DTC
NOTE: Specifications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Page: 48
Turbo Air
TCBE‐72SDR
Item #45
Project :
4184 E. Conant St.
Long Beach, CA 90808
Tel. 310-900-1000
Fax. 310-900-1077
www.turboairinc.com
more durable, efficient, beautiful
Model # :
Item # :
Qty :
Available W/H :
Approval :
Chef Bases
Chef Base (E
(Extended
t d dT
Top))
3
Super Deluxe Series
Model : TCBE-72SDR
TCBE-72SDR-E
YEAR PARTS & LABOR
WARRANTY
TCBE-72SDR-E
- Each drawer accomodates
up to 4” deep sixth (1/6) size pans
(drawer pans not included)
TCBE-72SDR
FEATURES & BENEFITS
Strong body and durable construction
Efficient refrigeration system
Built with heavy duty, 304 stainless steel (16 gauges) Chef Base top
is manufactured of one-piece reinforced stainless steel to ensure
durability.
Turbo Air’s solid door refrigerators are designed with oversized and
balanced (CFC Free R-134A) refrigeration systems. These include
efficient evaporators and condensers for faster cooling and greater
efficiency.
Drawers
Side mount compressor unit
Small drawer holds up to 154 pounds.
Large drawer holds up to 242 pounds.
Countertops
TCBE-36 / 48 / 52SDR support up to 788 pounds of equipment.
TCBE-72 / 82SDR support up to 1,192 pounds of equipment.
TCBE-96SDR supports up to 1,435 pounds of equipment.
By positioning the compressor on the side of the unit, refrigerators
can now be serviced without being moved. Our innovative, front
breathing feature also allows this model to provide high efficiency in
narrow spaces.
High-density polyurethane insulation
The entire cabinet structure and solid doors are foamed-in-place
using high density, CFC free polyurethane insulation.
Durable stainless steel drawers
Top is insulated to eliminate heat transfer
to the interior of cabinet
Refrigerator holds 33°F ~ 38°F for the best
in food preservation
Compressor
3 YEAR
ISO9001:2008
5 YEAR
WA R R A N TY
(U.S.A only)
Model
Drawers
CU./FT.
Countertop Weight
Capacity (lbs.)
HP
AMPS
Crated
Weight (lbs.)
L x D x H*
TCBE-72SDR
TCBE-72SDR-E
4
4
15.1
15.1
1192
1192
1/3
1/3
4.5
4.5
418
438
72 x 32 x 201/2
78 x 32 x 201/2
Ver.201501
N13691 ‐ Los Chingones DTC
(inches)
* Height does not include 5-7/8” for caster height.
Page: 49
Turbo Air
TCBE‐72SDR
Item #45
Chef Bases
Chef Base (Extended Top)
ELECTRICAL DATA
Super Deluxe Series
TCBE-72SDR
TCBE-72SDR-E
115/60/1
115/60/1
NEMA 5-15P
NEMA 5-15P
Full Load Amperes
4.5
4.5
Compressor HP
1/3
1/3
Cord Length ft.
9
9
R-134A
R-134A
Ext. Length Overall in.
72 (1829mm)
78 (1981mm)
Ext. Depth Overall in.
32 (813mm)
32 (813mm)
Ext. Height Overall in.*
201/2 (521mm)
201/2 (521mm)
Voltage
Plug Type
Refrigerant
PLAN VIEW
(unit : inch)
DIMENSIONAL DATA
FRONT VIEW
# of Drawers
4
4
# of Pans
48
48
Net Capacity cu. ft.
15.1
15.1
Net Weight lbs
352
374
Gross Weight lbs..
418
440
Design and specifications subject to change without notice.
Actual shipping weight may differ due to extra packing materials for product protection.
* Height does not include 5-7/8” for caster height.
32 (813mm)
201/2 (521mm)
Self-contained system
83/4
1
83/4
5” swivel casters
261/2 (673mm)
3 Year Parts and Labor Warranty
Additional 2 Year Warranty on Compressor
161/8 (410mm)
47/8
Legs available for all models (optional)
Door locks available (optional)
SIDE VIEW
72 (1829mm)
597/8 (1520mm)
78 (1981mm)
241/4
(616mm)
47/8
377/8
(962mm)
531/2 (1359mm)
291/4 (743mm)
553/8 (1407mm)
251/4
(641mm)
PLAN VIEW
EXTENDED TOP PLAN VIEW
Ver.201501
Compressor
3 YEAR
ISO9001:2008
N13691 ‐ Los Chingones DTC
5 YEAR
W ARRANTY
(U.S.A only)
Turbo Air : 800-627-0032
Warranty : 800-381-7770
GK : 800-500-3519
AC : 888-900-1002
Page: 50
Fisher
N13691 ‐ Los Chingones DTC
22209
Item #48
Page: 51
Fisher
N13691 ‐ Los Chingones DTC
3312
Item #48
Page: 52
Turbo Air
TCBE‐48SDR
Item #50
Project :
4184 E. Conant St.
Long Beach, CA 90808
Tel. 310-900-1000
Fax. 310-900-1077
www.turboairinc.com
more durable, efficient, beautiful
Model # :
Item # :
Qty :
Available W/H :
Approval :
Chef Bases
Chef Base (E
(Extended
t d dT
Top))
3
Super Deluxe Series
Model : TCBE-48SDR
TCBE-48SDR-E
YEAR PARTS & LABOR
WARRANTY
TCBE-48SDR-E
- Each drawer accomodates
up to 4” deep sixth (1/6) size pans
(drawer pans not included)
TCBE-48SDR
FEATURES & BENEFITS
Strong body and durable construction
Efficient refrigeration system
Built with heavy duty, 304 stainless steel (16 gauges) Chef Base top
is manufactured of one-piece reinforced stainless steel to ensure
durability.
Turbo Air’s solid door refrigerators are designed with oversized and
balanced (CFC Free R-134A) refrigeration systems. These include
efficient evaporators and condensers for faster cooling and greater
efficiency.
Drawers
Side mount compressor unit
Small drawer holds up to 154 pounds.
Large drawer holds up to 242 pounds.
Countertops
TCBE-36 / 48 / 52SDR support up to 788 pounds of equipment.
TCBE-72 / 82SDR support up to 1,192 pounds of equipment.
TCBE-96SDR supports up to 1,435 pounds of equipment.
By positioning the compressor on the side of the unit, refrigerators
can now be serviced without being moved. Our innovative, front
breathing feature also allows this model to provide high efficiency in
narrow spaces.
High-density polyurethane insulation
The entire cabinet structure and solid doors are foamed-in-place
using high density, CFC free polyurethane insulation.
Durable stainless steel drawers
Top is insulated to eliminate heat transfer
to the interior of cabinet
Refrigerator holds 33°F ~ 38°F for the best
in food preservation
Compressor
3 YEAR
ISO9001:2008
5 YEAR
WA R R A N TY
(U.S.A only)
Model
Drawers
CU./FT.
Countertop Weight
Capacity (lbs.)
HP
AMPS
Crated
Weight (lbs.)
L x D x H*
TCBE-48SDR
TCBE-48SDR-E
2
2
9.2
9.2
788
788
1/4
1/4
3
3
284
304
475/8 x 32 x 201/2
535/8 x 32 x 201/2
Ver.201501
N13691 ‐ Los Chingones DTC
(inches)
* Height does not include 5-7/8” for caster height.
Page: 53
Turbo Air
TCBE‐48SDR
Item #50
Chef Bases
Chef Base (Extended Top)
ELECTRICAL DATA
Voltage
Plug Type
Super Deluxe Series
TCBE-48SDR
TCBE-48SDR-E
115/60/1
115/60/1
NEMA 5-15P
NEMA 5-15P
3
3
Compressor HP
1/4
1/4
Cord Length ft.
9
9
R-134A
R-134A
Ext. Length Overall in.
475/8 (1209mm)
535/8 (1361mm)
Ext. Depth Overall in.
32 (813mm)
32 (813mm)
Ext. Height Overall in.*
201/2 (521mm)
201/2 (521mm)
Full Load Amperes
Refrigerant
PLAN VIEW
(unit : inch)
DIMENSIONAL DATA
# of Drawers
2
2
# of Pans
30
30
Net Capacity cu. ft.
9.2
9.2
Net Weight lbs
218
240
Gross Weight lbs..
284
304
FRONT VIEW
Design and specifications subject to change without notice.
Actual shipping weight may differ due to extra packing materials for product protection.
* Height does not include 5-7/8” for caster height.
32 (813mm)
201/2 (521mm)
Self-contained system
83/4
1
83/4
5” swivel casters
261/2 (673mm)
3 Year Parts and Labor Warranty
Additional 2 Year Warranty on Compressor
161/8 (410mm)
47/8
Legs available for all models (optional)
Door locks available (optional)
SIDE VIEW
475/8 (1209mm)
351/2 (902mm)
291/4 (743mm)
47/8
241/4
(616mm)
307/8
531/2 (1359mm)
535/8 (1361mm)
391/8
(994mm)
PLAN VIEW
EXTENDED TOP PLAN VIEW
Ver.201501
Compressor
3 YEAR
ISO9001:2008
N13691 ‐ Los Chingones DTC
5 YEAR
WARRANTY
(U.S.A only)
Turbo Air : 800-627-0032
Warranty : 800-381-7770
GK : 800-500-3519
AC : 888-900-1002
Page: 54
Advance Tabco
K‐242‐X
Item #52
STAINLESS STEEL
FABRICATED SERVICE & MOP SINKS
9-OP-40DF Shown
Item #:
Qty #:
Model #:
Project #:
FLOOR UNITS
FEATURES:
Floor mounted unit eliminates the need of lifting heavy containers.
Tile edge furnished on the rear.
Bowls rectangular in design for increased capacity.
K-16 Free Flow Drain is included with each mop sink.
9-OP-20 Shown
Notched Out Front Allows
Ease of Emptying Mop Bucket
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a satin finish.
MATERIAL:
16 Gauge type “304" series stainless steel sink bowl.
18 Gauge type “304" series stainless steel sink apron.
Fabricated Bowls are Welded
Together at the Seams
9-OP-40 Shown
16” HIGH SIDE & BACK
SPLASHES FOR
9-OP SERIES MOP SINKS
STANDING UNITS
FEATURES:
Leg mounted design.
High back splash.
3 1/2” Basket Drain Inlcuded
16 Gauge, 300 Series Stainless Steel
Available with Back & Left Side,
Back & Right Side or Back & Both Sides
(Mounting Hardware Included)
CONSTRUCTION:
All TIG welded.
Welded areas blended to match
adjacent surfaces and to a
satin finish.
Conventional
8-OP-16
MODEL
K-288LorR
K-290LorR
MATERIAL:
Fits Units:
9-OP-20
9-OP-40
9-OP-28
9-OP-48
Height Above
Finished Floor (A.F.F.)
26”
32”
26”
32”
Splashes Available on All 3 Sides
4-OP-18 - Heavy gauge type
K-298
“304" series stainless steel.
8-OP-16 - 18 gauge type
“304” series stainless steel.
Economy
K-299
4-OP-18
SERVICE & MOP SINK ACCESSORIES
9-OP-20
9-OP-40
9-OP-28
9-OP-48
26”
32”
26”
32”
FLOW RATE
9.6 GPM/
36.3 LPM
MOP DRAINAGE TRAY
8” O.C.
• 16 Gauge, 300 Series Stainless Steel
• Includes Cast 1/2” Drain & Plastic Hose
• Wall Mounted (Hardware not Included)
• 2” Tray Height with 6” Rear Splash
(Overall Height)
Approx.
MODEL L x W x H Wt.
K-243 32” x 4” x 6” 13 lbs.
K-240
SERVICE FAUCET*
K-16 FLOOR
MOP SINK
REPLACEMENT
DRAIN
UTILITY SHELF - 8” WIDE
inches mm
24”
36”
K-242 MOP HANGER - 23” Wide
610
914
MODEL
K-245
K-246
Approx
Wt
Approx
Cubes
12 lbs.
1
15 lbs.
2
K-244 HOSE & HANGER
*Does not meet Federal Lead Free Standards as it is not intended for potable water.
Customer Service Available To Assist You
1-800-645-3166
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
E-9
N13691 ‐ Los Chingones DTC
Page: 55
Advance Tabco
K‐242‐X
Item #52
DIMENSIONS
TOL Overall: ± .500"
Interior: ± .250"
SUGGESTED INSTALLATION
1"
10 2
21"
CL
ALL DIMENSIONS ARE TYPICAL
12 1 "
2
25"
CL
9-OP-20
9-OP-40
25"
33"
9-OP-20:
9-OP-28:
9-OP-40:
9-OP-48:
1"
10 2
21"
CL
9-OP-28
9-OP-48
16" x 20" x 6" Bowl with 10" Overall Height. Wt. 26 lbs.
20" x 28" x 6" Bowl with 10" Overall Height. Wt. 35 lbs.
16" x 20" x12" Bowl with 16" Overall Height. Wt. 45 lbs.
20" x 28" x 12" Bowl with 16" Overall Height. Wt. 63 lbs.
12 1 "
2
25"
CL
9-OP-40DF
25"
9-OP-48DF
33"
9-OP-40DF:
9-OP-48DF:
16" x 20" x12" Bowl with 16" Overall Height. Wt. 45 lbs.
20" x 28" x 12" Bowl with 16" Overall Height. Wt. 63 lbs.
MOP SINK DRAIN ASSEMBLY
Flat Strainer Plat
K-243 MOP DRAINAGE TRAY
Interior Compression Ring
Exterior Thread
30"
Interior Thread
6"
Interior Rubber Bladder
Rubber Gasket
1/2" IPS Drain
2" IPS Pipe
1/4" x 1 1/2"
Slotted Mounting Holes
2 43 "
Fiber Washer
2"
6"
Die Cast Nut
15"
13 lbs.
3"
CL
CL
8-OP-16
4-OP-18
CONVENTIONAL DESIGN
ECONOMY DESIGN
1 1/2" IPS
E-9a
200 Heartland Boulevard, Edgewood, NY 11717-8380
N13691 ‐ Los Chingones DTC
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, NOVEMBER 2013
Page: 56
Carter‐Hoffmann
CW2E
Item #62
CW2E & CW4
CARTER-HOFFMANN
NACHO CHIP WARMERS
(with top-mounted forced air heating system)
CW4
Top View
CW2E
Top View
Carter-Hoffmann CAD Drawing Scale: 1/4” = 1’
CW4
Overall Dimensions
Height
Legs
Depth
Shipping
Width
Cubic Feet*
in
mm
in
mm
CW2E
3.00
383/4
984
23
584
CW4
5.75
451/2
1156
28
711
in
Weight
mm
in
mm
lbs
223/4
578
4
102
135
kgs
61
301/8
765
4
102
160
73
*Approximately 22 gallons of chips in CW2 and 44 gallons of chips in CW4.
CONSTRUCTION...Completely welded
cabinet construction with outer cabinet
welded to cabinet liner.
HANDLES... Bottom door and product
loading door feature integrally formed, full
width stainless steel handles.
CABINET MATERIAL...All stainless steel
construction
BOTTOM CRUMB PAN... Standard
12”x20”x2.5” stainless steel pan, mounted
on bottom of unit to catch crumbs. Slides
out for easy cleaning.
INSULATION...High density fiberglass,
full 1” thick continuous wrap-around type
in top, bottom and sides.
DOORS...16 gauge single panel polished
stainless steel.
HINGES...Integral and continuous rolled
butt type hinges. Removable stainless
steel full length pin.
LEGS... 4” adjustable legs
CONTROLS...Internal mechanical
thermostat. Factory pre-set temperature
of 175oF (79oC). Adjustable with tools via
access hole with grommet; located on
rear of heating unit. On/off switch with
power indicating light.
HEATING SYSTEM...Top mounted lift off
forced air heating system. Incoloysheathed heating elements, heavy duty
fan motor. Air forced through rear duct
and up through bottom chip grates. Duct
and grates removable for cleaning.
ELECTRICAL CHARACTERISTICS...
CW2E & CW4 operate on 1530 watts,
12.6 amps, 60 cycle, single phase. Six
foot 3 wire rubber cord with 3 prong
grounding plug. NEMA 5-15P.
PERFORMANCE...Capable of heating to
190O F (88O C). Preheat to 160O F (71O
C) in approximately 20 minutes.
ACCESSORIES/OPTIONS...
18 gauge stainless steel rolling stand
with 3”stem casters, two with brakes
1/4” thick clear polycarbonate viewing
window in bottom door
220 or 240 volt electrical
configuration
N13691 ‐ Los Chingones DTC
Page: 57
E55 0210
CARTER-HOFFMANN
1551 McCormick Ave., Mundelein, IL 60060
Tel (847) 362-5500 • (800) 323-9793 • Fax (847) 367-8981
www.carter-hoffmann.com
Printed in U.S.A.
Carter-Hoffmann is a registered
trademark of Carter-Hoffmann LLC
Specifications subject to change through product improvement & innovation.
NSF/ANSI 4
SPECIFICATIONS
Capacity
Number
FOOD SERVICE EQUIPMENT
CW4
Front View
CW2E
Front View
Model
NACHO CHIP WARMERS
CW4
Side View
CW2E
Side View
CW2E
Item #62
CW2E & CW4
NACHO CHIP WARMERS
Since 1947, Foodservice Equipment That Delivers!
HIGH PERFORMANCE
CONVECTION HEATER...
Heating system located in top
of cabinet with blower for
quick heat up and recovery
and even heat distribution
throughout cabinet.
Thermostat for optimal
holding temperature located
on rear of cabinet; accessible
& adjustable with tools to
prevent easy tampering.
Heater lifts off for easy
cleaning and service.
STAINLESS STEEL
CONSTRUCTION... All
stainless steel exterior for
easy sanitation and long
lasting clean appearance.
PATENTED FIRST-IN,
FIRST-OUT GRAVITY
PRODUCT FEED...
Facilitates constant product
rotation to ensure freshness.
LARGE CHIP CAPACITY...
Provides ample supply of
product, even during peak
rush periods. Approximatey
44 gallons in CW4 and 22
gallons in CW2.
CW2E
(shown with optional clear bottom door)
. Fax (847) 367-8981
EXCLUSIVE HEAT DUCT BAFFLING SYSTEM...
Warm air is directed through duct in back of
cabinet and up through chips on the bottom.
Assures uniform temperatures throughout cabinet
for consistent holding of product.
Tel (847)362-5500 . (800) 323-9793
www.carter-hoffmann.com
1551 McCormick Avenue, Mundelein, Illinois 60060
FEATURES & BENEFITS
Carter‐Hoffmann
BOTTOM CRUMB PAN... Catches broken
chips and crumbs. Easily removed
without tools for cleaning. Standard
steam table size is easily replaceable.
NSF/ANSI 4
N13691 ‐ Los Chingones DTC
Page: 58
Wells
ICP‐100
Item #63
Job
Item No.
Ice Pans
Non-Refrigerated Cold Pans
Over 90 Years Of Quality Foodservice
Products And Service
❏ ICP-100 ❏ ICP-200 ❏ ICP-300
❏ ICP-400 ❏ ICP-500 ❏ ICP-600
STANDARD FEATURES
❏ Drop-in design
❏ NSF-2 compliant
❏ Hold standard 12” by 20” food pans and fractional sized pans
❏ 18 gauge stainless steel top and liner for maximum strength
and durability
❏ 1” drains per well for ease of cleaning
❏ Perforated bottom strainer plate conveniently holds ice above
drain for ease of cleaning
❏ CFC free fully insulated
❏ Foamed-in place insulation keeps food cold while saving
energy
❏ Recessed ledge for pan support and colder, fresher products
❏ Limited 1 year parts and labor warranty
Model ICP-300
DESCRIPTION
Wells Non-Refrigerated Drop-In Ice Pans are designed to hold
pre-chilled food products at serving temperatures. All models are
completely self-contained in one to six-well models featuring CFC
free insulation. Recessed top ledges lowers inset pans; keeping
food colder and fresher and meet NSF-2 guidelines.
OPTIONS & ACCESSORIES
❏ Divider bars for fractional pans
❏ 2nd year parts & labor warranty
CERTIFICATIONS
SPECIFICATIONS
Exterior – One-piece top flange and coved-corner interiors
constructed of 18 gauge stainless steel. Exterior body constructed
of heavy gauge, corrosion resistant steel.
Interior – CFC free foamed-in-place insulation through-out. Each
pan features a 1” drain located in the center for easy cleaning,
and recessed ledges for pan support.
Sheet No. WELLSICP-02/12
Wells Bloomfield · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-3636
www.wellsbloomfield.com © 2012 Wells Bloomfield · Printed in the U.S.A.
N13691 ‐ Los Chingones DTC
NOTE: Specifications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Page: 59
Wells
ICP‐100
Item #63
Ice Pans
Non-Refrigerated Cold Pans
❏ ICP-100 ❏ ICP-200 ❏ ICP-300
Over 90 Years Of Quality Foodservice
Products And Service
❏ ICP-400 ❏ ICP-500 ❏ ICP-600
INCHES
MM
OTE:
N
Specifications
are subject to change
without notice and
are not intended for
installation purposes.
See installation
instructions prior to
installing the unit.
SHIPPING INFORMATION
SPECIFICATIONS
OVERALL DIMENSIONS
INTERIOR DIMENSIONS
OVERALL DIMENSIONS
CUT OUT DIMENSIONS
A
B
E
Width
Length
Left to Right
Front to Back
Left to Right
Front to Back
Left to Right
Inches
(MM)
Inches
(MM)
C
Height
Inches
(MM)
D
Front to Back
Inches
(MM)
Inches
(MM)
Inches
(MM)
Inches
(MM)
ICP-100
25-3/8
(645)
17-3/8
(441)
9-3/4
(248)
19-7/8
(505)
11-7/8
(301)
23-7/8
(606)
ICP-200
25-3/8
(645)
31
(787)
9-3/4
(248)
19-7/8
(505)
25-1/2
(648)
ICP-300
25-3/8
(645)
44-3/4
(1137)
9-3/4
(248)
19-7/8
(505)
ICP-400
25-3/8
(645)
58-1/2
(1486)
9-3/4
(248)
ICP-500
25-3/8
(645)
72-1/4
(1847)
ICP-600
25-3/8
(645)
86
(2184)
Model
Number
WEIGHTS
CARTON DIMENSIONS
CRATE SIZE
Model
Number
SHIPPING
WEIGHT
POUNDS
(KG)
INSTALLED
WEIGHT
POUNDS
(KG)
WIDTH
Inches
(MM)
DEPTH
Inches
(MM)
HEIGHT
Inches
(MM)
CUBIC
FEET
CUBIC
METERS
15-7/8
(403)
ICP-100
89
(40)
84
(38)
19
(482)
27
(686)
32
(813)
9.5
0.27
23-7/8
(606)
29-1/2
(749)
ICP-200
182
(83)
176
(80)
27
(686)
32
(813)
32
(813)
16.0
0.46
39-1/4
(997)
23-7/8
(606)
43-1/4
(1099)
ICP-300
194
(88)
187
(85)
27
(686)
46
(1168)
32
(813)
23.0
0.65
19-7/8
(505)
53
(1346)
23-7/8
(606)
57
(1448)
ICP-400
258
(117)
250
(113)
27
(686)
60
(1524)
32
(813)
30.0
0.85
9-3/4
(248)
19-7/8
(505)
66-3/4
(1695)
23-7/8
(606)
70-3/4
(1797)
ICP-500
278
(126)
269
(122)
27
(686)
73
(1854)
32
(813)
36.5
1.04
9-3/4
(248)
19-7/8
(505)
80-1/2
(2045)
23-7/8
(606)
84-1/2
(2146)
ICP-600
290
(154)
280
(109)
27
(686)
87
(2210)
32
(813)
43.5
1.23
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
specifications. By using the information provided, the user assumes all risks in connection with such use.
Wells Bloomfield · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-3636
www.wellsbloomfield.com © 2012 Wells Bloomfield · Printed in the U.S.A.
N13691 ‐ Los Chingones DTC
NOTE: Specifications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Page: 60
Delfield
204P
Item #64
Item _____________________________________
Quantity _________________________________
204 Series
CSI Section 11400
Approved ________________________________
Date _____________________________________
Water And Ice Station
Models
•
204
•
204P Water and ice station with pitcher filler
Water and ice station with glass filler
Standard Features
• Top is 18-gauge stainless steel with raised
die stamped opening
• Chrome plated wire strainer
• Glass filler is 9.5” high
• Pitcher filler is 13.5” high
• One-piece 20-gauge stainless steel lift-off
cover with handle
• Liner of ice bin is high-impact ABS plastic
with coved corners
• 1” diameter drain plumbed out the bottom
• High density environmentally friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane
foam throughout unit
• Exterior tank is made of galvanized steel
204
Specifications
Top is 18-gauge stainless steel, has 1.37” (3 cm) overhang
all around. Glass filler is 9.5” (24 cm) high, over die-stamped
drain opening fitted with chrome-plated wire strainer. Pitcher
filler is 13.5” (34 cm) high, over die-stamped drain opening
fitted with chrome-plated wire strainer. Ice bin opening is
die-stamped with .19” (5 mm) raised edges, measures 15.12” x
10.5” (38 cm x 27 cm), has one-piece 20-gauge stainless steel
lift-off cover.
Liner of ice bin is high-impact ABS plastic, has rounded corners
and is pitched to 1” (25 mm) diameter drain. Bin is insulated
all around with high-density environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane. Ice bin
holds 45 pounds of ice.
Exterior body is 24-gauge galvanized steel.
Cutout dimensions are 21” (53 cm) x 17.75” (45 cm).
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
N13691 ‐ Los Chingones DTC
www.delfield.com
Page: 61
204 Series: Water And Ice Station
Project ___________________________________
Delfield
204P
Item #64
24.00"
(61 cm)
11.88"
(30 cm)
5.69"
(14 cm)
22.00” (56cm)
8.25"
(21 cm)
16.44"
(42 cm)
19.25”
(49cm)
21.00"
(53 cm)
Plan View
204, 204P
Mounting Stud Locations
204, 204P
204P = 13.25" (34 cm)
204 = 9.50” (24cm)
10.25"
(26 cm)
2.12"
(5 cm)
1.37"
(3 cm)
13.10"
(33 cm)
12.25"
(31 cm)
1.00" (25 mm)
I.P.S. Drain
Connection
15.25"
(39 cm)
3.00"
(8 cm)
1" (25 mm) I.P.S
Drain Connection
16.75"
(43 cm)
Side View
204, 204P
Elevation View
204, 204P
204 Series
Water And Ice Station
.50" I.P.S.
Cold Water
Connection
Specifications
Model
L
D
H
Cutout Size
Cabinet
Capacity
Ship
Weight
204
24”
(61 cm)
21”
(53 cm)
22.6”
(57 cm)
21” x 17.75”
(53 cm x 45 cm)
45lbs
(20kg)
47.5lbs
(22kg)
204P
24”
(61 cm)
21”
(53 cm)
26.35”
(67 cm)
21” x 17.75”
(53 cm x 45 cm)
45lbs
(20kg)
47.5lbs
(22kg)
Delfield reserves the right to make changes to the design or specifications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
N13691 ‐ Los Chingones DTC
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DS204_204P
12/12
Page: 62
Glastender
UCR24S‐L
Item #65
Project:
Item #:
Model #:
A family company manufacturing in the USA
AIA#
Qty:
SIS#
24" X 24" Undercounter
Refrigerator
UCR24S-L, UCR24S-R, UCR24X-L, UCR24X-R
Standard Features
• Solid door model meets 2008 energy efficiency standards
• Self-contained with six-foot grounded cord and plug
• All stainless steel interior construction with radius corners for
easy cleaning
• Stainless steel exterior front, top and sides
• Special rear access designed to accomodate outlet behind unit
and still maintain 24" depth
• CFC free foamed-in-place insulation
• Digital thermostat control with automatic defrost
• Automatic condensate evaporator
• Includes four 2" casters for an overall height of 34"
• Door lock and interior LED lighting standard
• Available with door hinged left or right, specify suffix ‘-L’ or
‘-R’, respectively
• Available with stainless door (UCR24S) or stainless glass door
(UCR24X)
UCR24S-L
UCR24X-R
Conforms to ANSI/UL STD 471
Certified to CSA STD
C22.2 No. 120
NSF standard 7 listed
for open food storage
Specifications
Storage Capacity
• 3.41 cubic feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls, ceiling, and evaporator housing
• 22 gauge stainless steel parts include: front, top and sides of cabinet
• 22 gauge galvanized steel parts include: exterior back
• 20 gauge stainless steel parts include: front, back and side base covers and exterior of door
• 16 gauge galvanized steel parts include: base
• 12 gauge stainless steel parts include: hinges and hinge brackets
Electrical
• 115V, 1 phase, 60 Hz, 6.0 full load amps
• Dedicated 15 amp circuit is required
• Includes a 6 foot grounded cord and plug
Refrigeration
• 1/10 HP, R134a refrigerant
• Operating range 34°F (1°C) to 40°F (4°C)
Plumbing
• Automatic condensate evaporator. No drain connection required
Shelving
• Two adjustable coated shelves included
Casters
• Four 2″ casters. The two front casters are locking
Dimensional Information
24"
24"
11-7/8"
20"
22"
24"
13-1/2"
34"
20-3/4"
DOOR
OPENING
31-3/8"
20"
PLAN VIEW
SIDE ELEVATION
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780 Approval/Notes:
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
FRONT ELEVATION
Specifications subject to change without notice. For current specifications please visit our website.
Printed in USA
N13691 ‐ Los Chingones DTC
Rev. 08-26-13
6.11
Page: 63
Bunn
CWTF15‐3‐0217
Item #66
Item#
Project
12 Cup Automatic Coffee Brewer
Date
Features
12 Cup Automatic Coffee Brewer
• Brews 3.8 to 7.5 gallons (14.4 to 28.4 litres) of perfect coffee per hour.
• Model is space-saving 8.5" (21.6 cm) wide.
• All stainless steel construction.
• Hot water faucet except on CWT models (see back).
• Pourover feature on all models.
• SplashGard® funnel deflects hot liquids away from the hand.
• International electrical configurations available.
Model CWTF15–3
(decanters sold separately)
Dimensions: 18.9” H x 8.5” W x 17.8” D
(48cm H x 21.6cm W x 45.2cm D)
Model CWTF15–2
Model CWTF15–1
(decanters sold separately)
Dimensions: 18.9” H x 8.5” W x 17.8” D
(48cm H x 21.6cm W x 45.2cm D)
(decanters sold separately)
Dimensions: 16.8” H x 8.5” W x 17.8” D
(42.7cm H x 21.6cm W x 45.2cm D)
For current specification sheets and other information, go to www.bunn.com.
Related Products
Easy Clear® EQ-17-TL
Product No. : 30200.1000
Dimensions:
127⁄16" H x 21⁄2" W x 3" D
31.6 cm H x 6.35 cm W x 7.62 cm D
quantities of 2, 3, 6, 12, & 24)
Easy Pour® orange decanter (for decaf)
Product No. : 06101.0101
Quantity: 1 (also packaged in
Easy Clear® ED-17-TL
Product No. : 30201.1001
Dimensions: 81⁄4" H x 25⁄16" Dia.
20.95 cm H x 5.87 cm Dia.
quantities of 2, 3, 6, 12, & 24)
Model
CWTF15
CWTF20
CWTF35
1GPR SS Portable Server
on an RWS1 Warmer
1GPR Product No. : 12487.0001*
RWS1 Product No. : 12203.0010
Easy Pour® black decanter
Product No. : 06100.0101
Quantity: 1 (also packaged in
*Also available with side handles
or black decor.
Paper Filter Pack
Product No. : 20115.0000
Packed per case: 1,000
Dimensions: 41⁄4” Base x 23⁄4” Sidewall
10.8 cm Base x 6.98 cm Sidewall
Agency Listing
UL
LISTED
UL
LISTED
UL
LISTED
Patents Apply
N13691 ‐ Los Chingones DTC
3/09
Page: 64
A1.1
Bunn
CWTF15‐3‐0217
Item #66
Dimensions & Specifications
Model
Product #
CWTF15-1
CWTF15–2
CWTF15–3
CWTF15–3
CWTF20–3
CWTF35–3
CWTF35–3
CWT15
CWT20
CWT35
12950.0293
12950.0211
12950.0213
12950.0217
12950.0283
12950.0253
12950.0261
12950.0356
12950.0291
12950.0292
Volts
120
120
120
120
120
120/208-240
120/208-240
120
120
120/240
Amps Tank Heater
Watts
Total
Watts
Brewing
Capacity
Cu.
Ft.
12.3
13
14
13.9
17.9
17.1*
17.1*
13.9
17.9
17.1
1470
1570
1670
1670
2150
3850
3850
1670
2150
3850
3.8 gal./hr.
3.8 gal./hr.
3.8 gal./hr.
3.8 gal./hr.
5.1 gal./hr.
7.5 gal./hr.
7.5 gal./hr.
3.8 gal./hr.
5.1 gal./hr.
7.5 gal./hr.
3.9
3.9
3.9
3.9
3.9
3.9
3.9
3.9
3.9
3.9
1320
1320
1320
1320
1800
3500
3500
1320
1800
3500
Shipping
Cord
Weight Attached
27 lbs.
33 lbs.
33 lbs.
34 lbs.
34 lbs.
33 lbs.
34 lbs.
30 lbs.
30 lbs.
30 lbs.
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
*17.1 Amps @120/240 Volts
Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
Electrical: Model 15 requires 2-wires plus ground service rated 120V, single phase, 60 Hz.
Model 20 requires 2-wires plus ground service rated 120V, single phase, 60 Hz.
Model 35 requires 3-wires plus ground service rated 120/208 or 120/240V, single phase, 60 Hz.
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with 1⁄4" male flare fitting.
20.65
8.50
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
N13691 ‐ Los Chingones DTC
3/09 © Bunn-O-Matic Corporation
Page: 65
Krowne
S‐36
Item #91
STANDARD SERIES UNDERBAR
SINGLE AND DOUBLE SPEEDRAILS
MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________
PRODUCT IMAGES
STANDARD FEATURES
■■ Construction
20 gauge stainless steel
■■ Mounting
1 keyhole slot 1 3/8” from ends of unit on each side. Units 36” and
up add a third keyhole slot in center for added support. Mount units
with #10-5/8” long sheet metal screw (not included)
■■ Storage Capacity
Single: Holds standard and liter size bottles
Double: Holds standard and liter size bottles. 2 levels of bottles for
added capacity
S-24 SINGLE SPEEDRAIL SHOWN
D-24 DOUBLE SPEEDRAIL SHOWN
APPROVED BY:
Due to our commitment to continued product improvement, specifications are subject to change without notice.
CERTIFICATIONS:
Krowne Metal Corporation
Printed in the USA
Rev. 03/2012
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
N13691 ‐ Los Chingones DTC
Page: 66
No. 4.13
Krowne
S‐36
Item #91
STANDARD SERIES UNDERBAR
SINGLE AND DOUBLE SPEEDRAILS
MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________
SINGLE SPEEDRAILS with KEYHOLE SLOTS
Model
Numbers
S-24
S-30
S-36
S-48
DOUBLE SPEEDRAILS with KEYHOLE SLOTS
Model
Numbers
D-24
D-30
D-36
Length
Ⓐ
Weight
(lbs.)
2’-0”
2’-6”
3’-0”
4’-0”
4
4
5
7
Length
Weight
(lbs.)
Ⓐ
2’-0”
2’-6”
3’-0”
8
10
12
APPROVED BY:
Due to our commitment to continued product improvement, specifications are subject to change without notice.
CERTIFICATIONS:
Krowne Metal Corporation
Printed in the USA
Rev. 03/2012
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
N13691 ‐ Los Chingones DTC
Page: 67
No. 4.13
Krowne
KR18‐1C
Item #92
ROYAL SERIES UNDERBAR
HAND SINKS
MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________
PRODUCT IMAGES
KR18-18ST SHOWN
STANDARD FEATURES
KR18-1C SHOWN
AVAILABLE IN 1800 or 2100 SERIES
OPTIONAL ACCESSORIES
■■
■■
■■
■■
KR-310
KR-311
KR-501
KR-701
■■ Sink Bowl
20 gauge stainless steel. 10” x 14” x 7” deep bowl with 1” IPS
drain in center
■■ Front Apron
20 gauge stainless steel clad over 20 gauge galvanized steel
■■ Backsplash
20 gauge stainless steel
■■ Sides
20 gauge stainless steel
■■ Back and Bottom
20 gauge galvanized steel
■■ Legs
1 5/8” tubular 16 gauge stainless steel with grey plastic bullet foot
■■ Plumbing
1/2” IPS hot and cold water. 1 1/2” IPS drain connection
■■ Faucet
4” OC wall or deck mount faucet with ceramic cartridge valves
■■ Low Lead Compliance
Low Lead Compliant faucets meet
California AB-1953 and Vermont S152 standards
Right End Splash
Left End Splash
Towel Ring
Perforated Dump Basket
APPROVED BY:
Due to our commitment to continued product improvement, specifications are subject to change without notice.
CERTIFICATIONS:
Krowne Metal Corporation
Printed in the USA
Rev. 03/2012
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
N13691 ‐ Los Chingones DTC
Page: 68
No. 5.26
Krowne
KR18‐1C
Item #92
ROYAL SERIES UNDERBAR
HAND SINKS
MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________
1800 SERIES: BASIC HAND SINK
1800 SERIES: SOAP & TOWEL HAND SINK
Model
Numbers
KR18-12DST
KR18-18DST
KR18-18ST
KR18-18WST
Length
Depth
Ⓐ
Ⓑ
Left Side
to Drain
Ⓒ
1’-0”
1’-6”
1’-6”
1’-6”
24”
24”
19”
19”
6”
9”
9”
9”
Weight
(lbs.)
60
60
60
49
Model
Numbers
Length
Left Side
to Drain
Weight
(lbs.)
KR18-1C
KR18-1CD
1’-0”
1’-0”
6”
6”
42
45
NOTE: KR18-1CD is 5” deeper (front to back) to match
units with single speedrail at 24” depth.
NOTE: KR18-12DST and KR18-18DST are 5” deeper (front to back) to
match units with single speedrail at 24” depth.
2100 SERIES: SOAP & TOWEL HAND SINK
Model
Numbers
KR21-12DST
KR21-18DST
KR21-18ST
Length
Depth
Ⓐ
1’-0”
1’-6”
1’-6”
2100 SERIES: BASIC HAND SINK
Ⓑ
Left Side
to Drain
Ⓒ
Weight
(lbs.)
Model
Numbers
Length
Ⓐ
26”
26”
21”
6”
9”
9”
60
60
60
KR21-1C
1’-0”
Left Side
to Drain
Ⓑ
Weight
(lbs.)
6”
42
NOTE: KR21-12DST and KR21-18DST are 5” deeper (front to back) to
match units with single speedrail at 26” depth.
APPROVED BY:
Due to our commitment to continued product improvement, specifications are subject to change without notice.
CERTIFICATIONS:
Krowne Metal Corporation
Printed in the USA
Rev. 03/2012
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
N13691 ‐ Los Chingones DTC
Page: 69
No. 5.26
Krowne
18‐74C
Item #96
STANDARD SERIES UNDERBAR
BAR SINKS
MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________
PRODUCT IMAGE
STANDARD FEATURES
18-53C SHOWN
AVAILABLE IN 1800 or 2100 SERIES
■■ Sink Bowl
20 gauge stainless steel. 10” x 14” x 10” deep bowl. 1 1/2” radius
on all vertical and horizontal corners. Furnished with 1” stainless
steel drain and 7 1/2” standpipe. Drain located in left rear corner
■■ Drainboard
20 gauge embossed stainless steel reinforced with welded braces
every 6 inches. 3/4” radius on all vertical and horizontal edges
■■ Front Apron
22 gauge stainless steel clad over 20 gauge galvanized steel
■■ Backsplash
22 gauge stainless steel
■■ Sides
20 gauge stainless steel
■■ Back and Bottom
20 gauge galvanized steel
■■ Legs
1 5/8” tubular 16 gauge galvanized steel with grey plastic bullet foot
■■ Faucet
1800 Series: 4” center wall mount faucet
2100 Series: 4” center deck mount faucet
■■ Low Lead Compliance
Low Lead Compliant faucet options are available to meet
California AB-1953 and Vermont S152 standards
OPTIONAL ACCESSORIES
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
C-24
C-33
C-36
C-39
C-40
C-63
C-64
C-66
H-109
H-200
S-“XX”
D-“XX”
Towel Ring
Perforated Basket
Upgrade: Stainless Steel Legs
Right End Side Splash
Left End Side Splash
Insulated Sink Bowl (One Bowl)
Insulated Sink Bowls (Three Bowls)
6” Longer Legs (36” Working Height)
Upgrade: Royal Series Low Lead Faucet
Upgrade: Commercial Series Low Lead Faucet
Single Speedrail (“XX” denotes 24, 30”, or 36” or 48”)
Double Speedrail (“XX” denotes 24, 30”, or 36”)
APPROVED BY:
Due to our commitment to continued product improvement, specifications are subject to change without notice.
CERTIFICATIONS:
Krowne Metal Corporation
Printed in the USA
Rev. 03/2012
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
N13691 ‐ Los Chingones DTC
Page: 70
No. 4.4
Krowne
18‐74C
Item #96
STANDARD SERIES UNDERBAR
BAR SINKS
MODEL: ___________________ PROJECT: _______________________ ITEM #: ______________ QTY: __________
1800 SERIES
Model
Numbers
Length
Left Side to
Drain
Ⓒ
Bowls
Ⓐ
Drainboard
Side
Ⓑ
18-21L
18-31C
2’-0”
3’-0”
12” Right
12” Each
4”
16”
1
1
35
48
18-32L
18-32R
18-42L
18-42R
18-42C
3’-0”
3’-0”
4’-0”
4’-0”
4’-0”
12” Right
12” Left
24” Right
24” Left
12” Each
4”
15”
4”
27”
15”
2
2
2
2
2
53
53
55
55
55
18-33
18-43L
18-43R
18-53C
18-63C
18-73C
18-83C
3’-0”
4’-0”
4’-0”
5’-0”
6’-0”
7’-0”
8’-0”
N/A
12” Right
12” Left
12” Each
18” Each
24” Each
30” Each
4”
4”
15”
15”
21”
27”
33”
3
3
3
3
3
3
3
55
60
60
69
75
86
94
18-64C
18-74C
18-84C
6’-0”
7’-0”
8’-0”
12” Each
18” Each
24” Each
15”
21”
27”
4
4
4
79
91
99
Ⓓ
Weight
(lbs.)
MECHANICAL REQUIREMENTS: 1/2” IPS hot and cold water. 1” IPS drain connection
2100 SERIES
Model
Numbers
Length
Ⓐ
Drainboard
Side
Ⓑ
Left Side to
Drain
Ⓒ
Bowls
Ⓓ
Weight
(lbs.)
21-31C
3’-0”
12” Each
16”
1
51
21-32L
21-32R
21-42L
21-42R
21-42C
3’-0”
3’-0”
4’-0”
4’-0”
4’-0”
12” Right
12” Left
24” Right
24” Left
12” Each
4”
15”
4”
27”
15”
2
2
2
2
2
56
56
58
58
58
21-33
21-43L
21-43R
21-53C
21-63C
21-73C
21-83C
3’-0”
4’-0”
4’-0”
5’-0”
6’-0”
7’-0”
8’-0”
N/A
12” Right
12” Left
12” Each
18” Each
24” Each
30” Each
4”
4”
15”
15”
21”
27”
33”
3
3
3
3
3
3
3
53
63
63
75
85
95
104
21-64C
21-74C
21-84C
6’-0”
7’-0”
8’-0”
12” Each
18” Each
24” Each
15”
21”
27”
4
4
4
88
100
109
MECHANICAL REQUIREMENTS: 1/2” IPS hot and cold water. 1” IPS drain connection
APPROVED BY:
Due to our commitment to continued product improvement, specifications are subject to change without notice.
CERTIFICATIONS:
Krowne Metal Corporation
Printed in the USA
Rev. 03/2012
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
N13691 ‐ Los Chingones DTC
Page: 71
No. 4.4
Glastender
DS24‐N‐N
Item #97
Project:
Item #:
Model #:
AIA#
Qty:
SIS#
One, Two And Three
Door Dry Storage Cabinets
DS__-N_-_ _ N(___)
Size:
24 = 24″ One Door
48 = 48″ Two Doors
72 = 72″ Three Doors
Base Height:
1=1″
6=6″ Legs only
Door Hinge Location:
(from left to right)
L = Left or R = Right
Top Style:
N=No finished top
L=Laminated
S=Stainless
Door Style:
B=Black vinyl-clad
U=Unlaminated
L=Laminated
S=Stainless
Standard Features
• Galvanized steel interior construction
• Foamed-in-place insulation for extra sturdiness
• Galvanized steel sub-top on DS48 and DS72 models
• Black vinyl-clad steel exterior front and sides
• Stainless steel die cast handle
• Leg sockets recessed into base
• 180° swinging doors
DS24-N1-LLN(R)
Specifications
Shelving
• Two adjustable shelves per door included
Legs
• 1-5/8″ diameter
• Stainless steel bullet feet
Materials
• 22 gauge black vinyl-clad parts include: sides and standard doors
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges, hinge brackets, and lock brackets
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Approval/Notes:
Specifications subject to change without notice. For current specifications please visit our website.
Printed in USA
N13691 ‐ Los Chingones DTC
Rev. 05-05-08
4.20
Page: 72
Glastender
DS24‐N‐N
Item #97
Dry Storage Cabinets
Dimensional Information
PLAN VIEW
24" (1-DOOR)
48" (2-DOOR)
72" (3-DOOR)
1 1/2"
SWING WILL CONTINUE IF
NO CABINET TO IMPEDE
180° SWING
FRONT VIEW
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
29 3/4"
DOOR
OPENING
35"
21"
SIDE VIEWS
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
48"
25 1/4"
22 3/4"
25 1/4"
30 3/4"
180°
SWING
22 1/2"
35"
35"
2 3/8"
21"
24"
STANDARD CABINET
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
N13691 ‐ Los Chingones DTC
6"
4 1/2"
4 1/2"
WITH OPTIONAL 6" LEGS
Printed in USA
Page: 73
Glastender
BB84
Item #101
AIA#
Project:
Item #: Model #:
A family company manufacturing in the USA
Qty:
SIS#
Back Bar Coolers
One, Two, Three and Four Door
Self-Contained
BB__ -_ _-_ _ (____)
Size:
36 = 36" One Door
60 = 60" Two Door
84 = 84" Three Door
108 = 108" Four Door
Refrig. Compartment:
L = Left or R = Right
BB60-L1-XSH(LR)
NSF standard 7 listed
for open food storage
Base Height:
1 = 1"
6 = 6" Legs
Conforms to ANSI/UL STD 471
Certified to CSA STD
C22.2 No. 120
Door Hinge Location†:
(from left to right)
L = Left or R = Right
Top Style:
N = No finished top
L = Laminated
S = Stainless
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
† Specify hinge location for each door
Standard Features
•
•
•
•
•
•
•
• Solid door models meet 2008 energy efficiency standards
• Self-contained
• All stainless steel interior construction with radius interior corners for easy cleaning
• CFC free foamed-in-place insulation
• Galvanized steel sub-top
• Black vinyl-clad steel exterior front and sides
• Automatic defrost timer
Stainless steel die cast handle
Automatic condensate evaporator
Leg sockets recessed into base
1/2" thick ABS plastic threshold scuff plate
180° swinging doors
Six foot grounded cord and plug (exits at rear)
Compressor compartment available on left or right side of unit
Specifications
Legs
• 1-5/8" diameter
• Stainless steel bullet feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls,
ceiling, front of cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides, standard
doors, and compressor compartment housing
• 22 gauge galvanized steel parts include: exterior sub-top and back
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base and compressor compartment base plate
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges, hinge brackets, and lock brackets
Electrical
• 120V, 1 phase, 60 Hz
• Dedicated 15 amp circuit is required
• Includes a 6 foot grounded cord and plug which exits the back of refrigeration compartment
Refrigeration
• R134a
Operating Range
• 34°F (1°C) to 40°F (4°C)
Plumbing
• Automatic condensate evaporator. No drain connection required
Shelving
• Two adjustable coated shelves and one bottom coated rack
per door included
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Approval/Notes:
Specifications subject to change without notice. For current specifications please visit our website.
Printed in USA
N13691 ‐ Los Chingones DTC
Rev. 08-23-13
4.03
Page: 74
Glastender
BB84
Item #101
Self-Contained Back Bar Coolers
Dimensional Information
BB36
BB60
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
12"
21"
COMPRESSOR
& EVAPORATOR
COMPARTMENT
29 3/4"
1 1/2"
DOOR
OPENING
35"
44"
COMPRESSOR
& EVAPORATOR
COMPARTMENT
36"
12"
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
60"
29 3/4"
2"
DOOR
OPENING
21"
20"
Front Elevation
Plan View
BB84
35"
Front Elevation
Plan View
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
84"
68"
COMPRESSOR
& EVAPORATOR
COMPARTMENT
12"
29 3/4"
DOOR
OPENING
2"
35"
20"
Front Elevation
Plan View
BB108
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
108"
12"
COMPRESSOR
& EVAPORATOR
COMPARTMENT
92"
29 3/4"
DOOR
OPENING
2"
35"
20"
Plan View
Front Elevation
Side View All Models
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
Note: Available with compressor left or right. Compressor left model
shown. Use Model Number Key to specify location when ordering.
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
48"
22 3/4"
Model
Capacity:
12 oz. bottle /
1/2 barrels/
750ml wine bottles
Refrigeration
Voltage
Amps
BB36
7 cases /
1 half barrel/
66 750ml wine bottles
1/6 H.P. /
R134a
120v /
60 Hz /
1 phase
8.2 full
load
BB60
15.2 cases /
2 half barrel/
138 750ml wine bottles
1/4 H.P. /
R134a
120v /
60 Hz /
1 phase
6.5 full
load
BB84
23.7 cases /
4 half barrels/
216 750ml wine bottles
1/4 H.P. /
R134a
120v /
60 Hz /
1 phase
6.5 full
load
BB108
32.2 cases /
5 half barrels/
294 750ml wine bottles
1/4 H.P. /
R134a
120v /
60 Hz /
1 phase
6.5 full
load
25 1/4"
25 1/4"
30 3/4"
20"*
(*21" BB36)
35"
180°
SWING
22 1/2"
35"
2 3/8"
6"
24"
4 1/2"
STANDARD CABINET
4 1/2"
WITH OPTIONAL 6" LEGS
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
N13691 ‐ Los Chingones DTC
Printed in USA
Page: 75
Glastender
CT‐3‐MF
Item #103
Project:
Item #:
Model #:
A family company manufacturing in the USA
AIA#
Qty:
SIS#
Column Towers
CTSize:
Specify the number of
faucets from 1 to 3.
Finish:
SS = Stainless steel
MF = Mirror finish
PB = Polished brass
Standard Features
•
•
•
•
•
•
CT-3-SS
NOTE: Faucet handles not included.
•
•
•
•
•
All stainless steel construction (brass is optional)
Integral surface mount drain pan with lift-out perforated inserts
1/4" shanks with 3/16" restriction lines
Available in grainline stainless, mirror finish stainless, or polished brass
Available with foamed-in-place cold plate assembly for recirculating system
Available without drain pan (specify suffix ‘-LD’ on the model
number)
Available with one, two, or three faucets
Stainless and mirror finish models include all stainless steel
faucets and shanks
Available with wine faucets (specify number and location
when ordering)
Unique internal support system for solid mounting
Base plate serves as template for hole cutting
Specifications
Drains
• Drain pan models - 1/2" tailpiece
Materials
• 20 gauge stainless steel or brass parts include: head, column, drain pan, and perforated inserts
• 16 gauge stainless steel parts include: inner column stiffener brackets
• 16 gauge galvanized steel parts include: base plate and faucet stiffeners
• 11 gauge stainless steel parts include: inner column base plate
Shank Sizes
• 1/4" I.D. with 3/16" fittings
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Approval/Notes:
Specifications subject to change without notice. For current specifications please visit our website.
Printed in USA
N13691 ‐ Los Chingones DTC
Rev. 04-11-13
5.03
Page: 76
Glastender
CT‐3‐MF
Item #103
Column Towers
Dimensional Information
5"
ONE
FAUCET
TOWER
4"
1 1/4"
NOTE: Faucet handles not included.
15"
10-1/4"
12"
1/2" DRAIN
14"
14"
12"
FRONT ELEVATION
SIDE ELEVATION
PLAN VIEW
NOTE: Faucet handles not included.
5"
TWO
FAUCET
TOWER
4"
1 1/4"
15"
10-1/4"
12"
1/2" DRAIN
14"
12"
14"
FRONT ELEVATION
SIDE ELEVATION
PLAN VIEW
NOTE: Faucet handles not included.
4"
5"
THREE
FAUCET
TOWER
15"
10-1/4"
12"
1 1/4"
1/2" DRAIN
12"
14"
FRONT ELEVATION
SIDE ELEVATION
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
N13691 ‐ Los Chingones DTC
14"
PLAN VIEW
Printed in USA
Page: 77
Download PDF
Similar pages