Manufacturing solutions
6 HS SERIES SOFT-MOUNT WASHERS High speed
MODEL
HS-6008
HS-6013
HS-6017
HS-6024
HS-6032
STAT
STAT / EASY LOAD / TILT
STAT / EASY LOAD / TILT
STAT / EASY LOAD / TILT
9
14
19
27
36
44
63
122
8
13
17
24
32
40
57
110
STAT
kg 1/9
Capacity
kg 1/10
STAT
Coin/Profit Plus/
Logi/Logi Pro
Controls
STAT
STAT
HS-6040
HS-6057
Inteli / Coin /
Profit Plus
Coin / Profit Plus /Logi / Inteli
HS-6110
Inteli
Machines with GDRIVE control and MDS suspension system which does not require bolting down. Various types of control are available: Coin Control and
Profit Plus for coin-op services, Logi Control for OPL laundries and industrial laundries, as well as dry cleaners, Logi Pro and Inteli Control for those looking for
flexibility and ease of use. Maximum spin speeds up to 400G.
6 RMS SERIES HARD-MOUNT WASHERS Medium speed
MODEL
Capacity
RMS610
RMS613
RMS617
RMS623
RMS628
kg 1/9
11
14
19
25
31
kg 1/10
10
13
17
23
28
Controls
Coin/Profit Plus/Logi/Logi Pro
Coin / Profit Plus / Logi
Medium speed hard-mounted machines that require holding down. GDRIVE control. Various types of control are available: Coin Control and Profit Plus or coin-op services,
Logi Control and Logi Pro for OPL laundries and industrial laundries, and Logi PRO for those looking for flexibility and ease of use in the control of more precise processes.
LS SERIES HARD-MOUNT WASHERS
Medium speed
6 RMG SERIES HARD-MOUNT WASHERS
Medium-High speed
MODEL
Capacity
RMG613
RMG617
RMG623
RMG628
MODEL
kg 1/9
14
19
25
30,5
Capacity
kg 1/10
13
17
23
28
Controls
LS-332
LS-335
kg 1/9
35
61
kg 1/10
32
55
Controls
Coin / Profit Plus / Logi Pro
Medium-High speed hard-mounted washing machines, with GDRIVE control, achieve spin
speeds of 200G factor. Controls available: Coin Control y Profit Plus for coin-op laundries,
Logi Pro Control for OPL and industrial laundries.
PM/CM/SM
The LS range of washing machines are sturdy, reliable,
versatile, eco-friendly and quiet. There are three control
options to meet the precise needs of each customer.
BW SERIES WASHER EXTRACTORS Sanitary barrier
MODEL
Capacity
BW160
BW260
BW380
BW450
BW630
BW840
BW1200
BW1400
BW1700
BW2000
kg 1/9
18
29
42
51
70
92
133
155
189
222
kg 1/10
16
26
38
45
63
84
120
140
170
200
Sanitary barrier washers. Loading and unloading are performed through separate doors to separate the clean area from the dirty area.
They guarantee an excellent hygienic washing process by carrying out, with the utmost precision, all the programmed parameters: time,
temperature and the chemical product dosage.
ED SERIES ECODRYERS (cross flow)
MODEL
Capacity
kg 1/25 - 1/18
ED260
ED340
ED460
ED660
10,5 - 14,5
13,5 - 19
18,5 - 25,5
26,5 - 37
Heating
Gas / Electricity / Steam
The ED series dryers optimise energy use and achieve excellent results in less time. They are easy to maintain because the filter is easy to clean.
Due to their ergonomic design, the width of the door aids loading and unloading. The Care Touch Drum system ensures the linen is treated with care, with
the holes in the drum being pressed in to prevent the linen from making contact with sharp edges.
SLI SERIES DRYING TUMBLERS (axial flow)
MODEL
Capacity
DOUBLE DRYER
SLI-9
SLI-14
SLI-14D
9
14
2 X 14
kg
Heating
Gas / Electricity
Gas
The SLI drying tumblers optimise drying whilst offering maximum energy efficiency. Its reliability and long life guarantee the laundry’s profitability. It is
extremely easy to use for the operator: a wide door facilitates easy loading and unloading. Comfortable working height for the user, which allows an easy
loading and unloading of the trolley.
STI SERIES DRYING TUMBLERS (radial flow)
MODEL
Capacity
kg
Heating
STI-14
STI-23
STI-34
STI-54
STI-77
14
23
34
54
77
Gas / Electricity
Gas / Electricity / Steam
Efficient, environmentally friendly drying tumblers with a high capacity and built to last. They are equipped with a rotating reverse system which, together
with the large door, guarantees an easy and optimum unloading. The filter cleaning, which appears on the display, guarantees the machine´s high
performance. We can automatically activate the crease-guard function at the end of the cycle (cooldown).
ST1302 INDEPENDENT DRYER (axial flow)
MODEL
Capacity
Heating
ST1302
kg
Up to 63
Gas / Steam / Thermal oil
The ST1302 dryer is designed for drying linen in commercial laundries, thanks to its
suction loading. It provides added efficiency (using only 1 kWh per litre evaporated)
and speed (from 3 to 4 cycles/hour). It saves energy, cares and extends the life of
the linen, and accurately controls all the parameters of the drying cycle.
The dryer’s special features include its exclusive axial air flow for increased
performance and to aid unloading, Ecoflow, an integrated system for re-circulating
the drying air, together with SPIROTILT, which enables fully automatic unloading
without needing to use the turbine.
TBS-50 BATCH WASHER
MODEL
TBS-50/5
TBS-50/6
TBS-50/7
TBS-50/8
TBS-50/9
TBS-50/10
TBS-50/11
TBS-50/12
Continuous batch washer, with a 50kg capacity per module. With the possibility to configure from 5 to 12 modules, outputs are available from 400kg up to
1500kg of clothes per hour. Three basic models: MULTI, HYGIEN & FLEXI, multiple options and accessories allow the TBS to adapt to the different washing
needs.
SPR-50 WATER EXTRACTION PRESS
Quick
DRAIN
MODEL
SPR-50
Hydraulic press for water extraction in a continuous washing system up to 50kg of linen.
It offers a programmable pressure of up to 40bar on the clothes.
The extracted water is reused by the batch washer. The efficiency and the low energy-consumption of the SPR-50 press
save time and costs in the drying process.
ST-100 DRYER
MODEL
ST-100
A dryer with a capacity for drying or conditioning up to two loads of linen from the batch washer, or up to 120 kg. It offers
the possibility of fully automated loading and unloading when integrated into a continuous washing system.
Its exclusive SPIROTILT system allows an automatic unloading without having to tilt the machine.
Available in gas, steam and thermal oil heating .
Wide range of options and accessories to increase production, performance and functions.
ST1302 DRYER
MODEL
ST1302
The ST1302 dryer is designed to dry and condition a cake or a load of up to 63kg. It provides added efficiency (using only
1 kWh per litre evaporated) and speed (from 3 to 4 cycles/hour). It saves energy, cares and extends the life of the linen,
and accurately controls all the parameters of the drying cycle.
The dryer’s special features include its exclusive axial air flow for increased performance and to aid unloading, Ecoflow,
an integrated system for re-circulating the drying air, together with SPIROTILT, which enables fully automatic unloading
without needing to use the turbine.
Available heating: Gas, steam, and thermal oil.
PB/PBP SERIES WALL-TYPE FLATWORK IRONERS
MODEL
PB3215
PB3221
PB5119
PB5125
PB5132
PBP5119
Cylinder Ø
mm
325
510
Speed
m/min
up to 11
up to 15
PBP5125
PBP5132
Wall-type strap ironers with a great capacity for evaporation and a high ironing quality that allow the linen to be processed directly after washing (HS). They
can be installed in a confined space. They have better control and flexibility, and incorporate various ironing support systems that automate the processes to
maximise productivity and effectiveness. The linen enters and leaves at the front. The speed is adjusted automatically depending on the degree of moisture in
the linen. PBP models, with primary folding, are fitted with sensors that detect the length of the linen automatically and apply the selected fold.
Available heating gas, electricity or steam.
COMPACT SERIES IRONING SYSTEM
5in1
MODEL
COMPACT 600
COMPACT 800
Cylinder Ø
mm
600
800
Speed
m/min
4 - 12
4 - 15
A compact high output flatwork ironing system, which allows the linen to be fed, ironed, dried, folded and stacked in a small space. It allows the user to
work with one, two or four work lanes.
Available in Standard option: cross folding on a single lane, or Multiline: cross folding on two lanes. The folds are made using an air blowing system and a
reversible conveyor. It includes a vacuum system on the table, which aids the feeding of the linen, option feeding clamps.
Available heating gas, electricity or steam.
P SERIES WALL-TYPE IRONERS
MODEL
P-2510
P-2514
Cylinder Ø
mm
250
Speed
m/min
2-4
Perfect for ironing flat linen. The input and output of the linen from the front and its installation close to the wall allows the space
in the laundry to be optimised to the full. A single operator can operate the machine using a foot pedal.
PC120 FLATWORK IRONERS
PC80 FLATWORK IRONERS
MODEL
PC12030-33-35/1
PC12030-33-35/2
PC-12030-33-35/3
MODEL
PC8030-33-35/1
PC8030-33-35/2
PC8030-33-35/3
N Cylinders
1
2
3
N Cylinders
1
2
3
Speed
m/min
5-50
The most advanced flatwork ironer on the market, offering control, efficiency,
performance, durability and low cost maintenance. Cylinder’s diameter 1200 mm,
with the possibility to provide 1, 2 or 3 cylinders, which allows ironing speeds of
50 m/min. Available in gas, steam and thermal oil heating.
Speed
m/min
5-35 (*45)
The Girbau’s flatwork ironer PC80 is the result of more than 35 years of experience in
the field of ironers manufacturing. Cylinder’s diameter 800 mm, with the option of
1, 2 or 3 cylinders. It allows ironing speeds of up to 45 m/min.
Available in gas, steam and thermal oil heating.
(*Option)
DR SERIES FEEDERS
MODEL
DRF
DRF-LITE
DRB
DRM
DR-1
DR series feeders comprise of a range with different models and versions that adapt to the key parameters in feeding systems: production, quality, type of
laundry and budget.
DRF is an automatic feeder which has maximum performances. You can feed up to 1200 pieces/per hour. It accepts a wide range of laundry: king size
sheets, duvet covers, table linen.
DRF LITE is an automatic feeder with basic performance. You can feed up to 750 pieces per hour. Low maintenance and great low cost.
DRB is an automatic feeder which has maximum performances. You can feed up to 900 pieces per hour.
DRM is a manual feeder. You can increase the feeding quality, it improves productivity and makes the worker’s labour easier.
DR-1 Allows one person to feed in up to 300 pieces of linen per hour, on a single lane, and with two people, up to 450 articles can be processed per hour.
FL and FR SERIES FOLDERS
MODEL
FL-KING
STACKERS
The FL and FR series folders offer reliability, productivity and
FL-SMART
FRB
FR+
SV1 / 2 /3
APB1 / 2
and top finishing quality in folding.
Folding machine for every need, Girbau offers a solution.
STACKERS
MODEL
SR1 / 2
SB
A range of Stacker’s that, integrate into Girbau’s folders, fulfilling the different folding and stacking needs.
SR: Rotating stacker
SV, SB and APB: Drop stacker
FT SERIES INDEPENDENT FOLDERS
MODEL
FTLITE
FTMAXI
FTTOPFOLD
The FT folder range is capable of folding any type of article with efficiency and quality, adapting to the demands of each particular laundry. With the
FT folders, Girbau reinforces its Easy & Best Solutions philosophy: creating flexible laundry solution packages that are adapted to any sector, so that each
customer can easily find the solution they are looking for in terms of laundry products and services.
FINISHING
IRONING BOARDS
MODEL
S/AAR S/AVR S/AVC
PRESSES
S/MP4 S/EIP4
FORM FINISHER
S/AV S/VC
S/MTA S/MTV
Professional finishing equipment for multiple applications.
TROLLEYS / TRANSPORT
KANGAROO TROLLEY
HANGER TROLLEY
SELECTION TROLLEY
MOVING BOTTOM TROLLEY
WET LINEN TROLLEY
SHELF TROLLEY
CONTAINER TROLLEY
Solutions for the transport and storage of all types of clothes.
Our service operation has a high level of technical expertise, both from specialist in-house departments and through a
wide net of authorised technical support agents which offers:
Authorised Technical Service: we provide you with a fast and effective solution to the problems that arise from any
equipment malfunction offering a rapid fix, utilising a wide net of technicians particularly trained to carry out repairs with
maximum efficiency and minimum downtime.
Installation and start-up projects: we can confirm planned installation meets all relevant requirements to allow
optimisation of machine performance. We will work with you to plan delivery of the equipment and installation including
full commissioning . We will then deliver and install the equipment carrying out full commissioning and training as
required, during this process we will provide you with all operating and safety information related to the installation
Spare parts service: through Girbau Technical Support and authorised distributors, we provide you with original Girbau
spare parts. Moreover, we guarantee the reliability and safety of the components used.
Aiming to offer a global solution tailored to suit the needs of each individual customer Girbau offers service and
maintenance options through a choice of maintenance contracts.
Extended Guarantee: optional extended warranty to allow you to increase the standard warranty period offered by the
factory. This gives you the peace of mind that your investment is fully protected for an additional period allowing you the
bin benefit of known costs that can be tailored to your business plans.
Preventive maintenance: we can also offer to carry out preventative maintenance in order to ensure you always benefit
from maximum performance of your equipment, avoiding unexpected failures and extending product life.
Managed Service (Global maintenance): total maintenance cover , we can offer full support for your equipment, including
all Labour and spare parts as well as a periodical supervision of the condition of the equipment.
What sort of service do you need for your installation?
Do you have maintenance staff with sufficient experience and training on GIRBAU´s equipment? Then you should
consider, together with the equipment purchase, an “ Extended Guarantee”. By doing so, you will increase the useful life the
equipment and you will have access to the Hot-line specialist technician who will provide you with the assistance needed
at any time.
Do you have a medium – sized installation with limited specialized technical resources and a low budget? The
preventive maintenance service will provide you with the necessary help to check your equipment periodically and
guarantee its optimum performance. Additionally you will receive special spare parts pricing.
Would you like to minimise the time and effort to
keep your installation working in optimum condition?
The GIRBAU Managed Service guarantees your
peace-of-mind offering a full equipment management
including both, labour and spare parts used in the
repairs, as well as periodic check of the equipment
through scheduled visits to your premises.
GIRBAU S.A. reserves the right to change specifications without notice
BRANCHES
Argentina - Buenos Aires -Tel. +54-1 149017600 - girbauargentina@girbau.com.ar
Australia - Sydney - Tel. +61 2 96755860 - sales@girbau.com.au
Brazil - Sao Paulo - Tel. +55 11-29820446 - girbaudobrasil@girbau.com.br
Cancún (Mex.) - Tel. (+52) 998 884 0517 - serviciotecnico@girbau.mx
China - Shenzhen & Hong Kong - Tel. +86-755-8211 1330 – info@girbau.com.cn
Cuba - La Habana - Tel. (+53-7) 8662071 al 73 - girbau@girbau.co.cu
Dominican Rep. - Punta Cana - Tel. +1 809-959-0615 - info@girbau.do
France - Roissy (Paris) - Tel. +33 1-49388585 - info@girbau.fr
Germany - Ratingen - Tel. +49 2102 9934619 - girbau@girbau.de
Italy - Marcon (VE) - Tel. +39 0418654330 - info@girbau.it
Portugal - Porto - Tel. +351 22 3758909 - vendasportugal@girbau.pt
U.A.E. - Dubai - Tel. +971 4-8839951 - sales@girbau.ae
U.K. - Hitchin - Tel. +44(0)-1462 427780 - info@girbau.co.uk
U.S.A. - Oshkosh, Wi & Los Angeles, Ca - Tel. +1(920) 2318222 - info@continentalgirbau.com
HEADQUARTERS
GIRBAU, S.A. Ctra de Manlleu, km. 1 - 08500 Vic (Barcelona) Spain - www.girbau.com
Tel. (+34) 93 886 2219 - Fax (+34) 93 886 0785 - sales@girbau.es
P01996 17/07
GIRBAU AUTHORISED TECHNICAL SERVICE
Download PDF
Similar pages