Sunnydaze Decor 30 in. Square Propane Gas Fire Pit Table with Lava Rocks Instructions / Assembly
Add to my manuals15 Pages
advertisement
▼
Scroll to page 2
of 15
OWNER'S MANUAL OWNER'S MANUAL READ BEFORE USE! Factory No.: HYFP50095-32 Item No.: 67761 Item No.: WAR-986 READ BEFORE USE! WARNING WARNING For Outdoor Use Only! Use Propane Gas Only ! For Outdoor Propane Use Only! Use Propane Gas Only ! cylinders sold separately. Propane cylinders sold separately. WARNING WARNING Improper installation, WARNING WARNING USE PROPANE GAS ONLY! USE PROPANE GAS ONLY! -Do not store or use gasoline or other -Do not store or use gasoline or other flammable vapors in the vicinity of this or any flammable vapors in the vicinity of this or any other other appliance. appliance. - Service must be performed by a qualified installer, - Service must be performed by a qualified installer, service service agency or the gas supplier. agency or the gas supplier. WARNING WARNING For use with cylinders marked PROPANE only. DO adjustment, alteration, service or maintenance can cause Improper adMustment, injury installation, or property damage. Read alteration, the owner's manual thoroughly before installing or servicing inMurythis or equipment. If service or maintenance can cause the information in thisWKH manual is notmanual followed exactly, a property damage. RHDG RZQHU V fire or explosion may resultor causing property thoroughly Eefore installing VHUYLFLQJ WKLV damage, personalIIinjury or loss of life. WKH LQIRUPDWLRQ LQ WKLV PDQXDO LV eTuipment. QRW IROORZHG H[DFWO\ D ILUH RU H[SORVLRQ PD\ UHVXOW FDXVLQJ SURSHUW\ GDPDJH SHUVRQDO LQMXU\ RU ORVV RI OLIH WARNING WARNING The propane cylinder must be disconnected this firebowl is not The propane cylinder mustuse. be disconnected when this firebowl is not use. For use with cylinders marked PROPANE only. DO NOT NOT connect to a remote gas supply. connect to a remote gas supply. If the firebowlis isstored storedindoors, indoors, detach leave If the firebowl detachand and leave propane cylinderoutdoors. outdoors. propane cylinder when DANGER If you smell gas: DANGER Shut off If you1.smell gas:gas to the appliance. 2. Extinguish open flame. 1. Shut off gas to any the appliance. 3. If odor continues, keep away from the appliance and 2. Extinguish any open flame. immediately call your gas supplier or fire department. 3. If odor continues, keep away from the appliance and immediately call your gas supplier or fire department. WARNING WARNING This firebowl must be attended at all times! This fireEoZl must Ee attended at all times! 5004909 DesignComplies certified under =21.97 • CSA CSA 2.41-(2014) 2.41-(2014) Design with ANSIANSI Z21.97-2014 Requirements forGas Outdoor Gas Fireplaces Outdoor Decorative Fireplaces. WARNING An LP-cylinder not connected for use shall not be stored WARNING in the vicinity of this or any for other appliance. An LP-cylinder not connected use shall not Ee stored in the vicinity of this or any other appliance. 1 1 DANGER Failure to follow the Dangers, Warnings and Cautions contained in this Owner’s Manual may result in serious bodily injury or death, or in a fire or an explosion causing damage to property. WARNING *Do not use this firebowl for cooking. *Remove the PVC Cover from the firebowl before opening the appliance. *Do not lay the PVC Cover over the firebowl until it is turned off and completely cooled down. *Do not burn any other materials than are supplied with and intended for use in this firebowl. *Do not pour water into firebowl. *The installation of this product must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code,ANSI Z223.1/NFPA 54, OR CAN/CGA-B149.1, National Gas and Propane Installation Code. *Do not use this firebowl if any part has been under water. *Do not store a spare or disconnected propane cylinder under or near this firebowl. *After a period of storage, and/or non use, the propane firebowl should be checked for gas leaks and burner obstructions before use. *Do not operate the propane firebowl if there is a gas leak present. *Never use a flame to check for gas leaks. *Combustible materials should never be within 48 inches of the top, back or sides of your propane firebowl. *Do not put any other fireplace cover or anything flammable on, or beneath the firebowl. *The propane firebowl should never be used by children. Children must be supervised when they are anywhere near the appliance. *Users should be alerted to the hazards of high surface temperatures and keep a safe distance to avoid burning or clothing ignition. *Pay attention when operating the firebowl. It is hot in use and should never be left unattended. Do not transit it while in operation. *Should fire go out while burning, turn the gas valve off. Follow the instruction and wait five minutes before attempting to relight. *Never use charcoal or any other solid fuel in the firebowl. Never parch clothing or other flammable materials on or near the firebowl. *Never lean over the open firebowl or place hands or fingers on the upper portion of an operational unit. *Keep ventilation openings in cylinder enclosure(FIREBOWL BODY) free and clear of debris. *Inspect the burner before each use of the appliance. If there is evidence of damage, the burner must be replaced prior to the appliance being put into operation. Use Manufacturer approved or supplied replacement burner only. *Do not rest feet on the firebowl. *Please take out the battery when not using the firebowl for an extended length of time. *Do not enlarge valve orifices or burner ports when cleaning the valve or burner. *Cylinder supply system must be arranged for vapor withdrawal. *Propane Tank used must include a collar to protect the cylinder valve. *Never fill the cylinder beyond 80% full. *Propane gas is not natural gas. Only use propane for this firebowl. *The conversion or attempted use of natural gas in a propane unit or propane gas in a natural gas unit is dangerous. *Do not use this firebowl on vehicles or boats. Always operate the appliance on flat ground outdoors. *Keep any electrical supply cord and the fuel supply hose away from any heated surfaces. *Do not use this firebowl unless all parts are in place. *The maximum gas supply pressure is 250psi. *Use LP cylinders only with these required measurements: 12"(30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) capacity maximum. *Clean the battery contacts and also those of the device prior to battery installation. *Remove batteries from equipment which is not to be used for an extended period of time. *Remove used batteries promptly. 2 FOR PROPANE GAS UNITS *The gas pressure regulator provided with the propane fire bowl must be used. *Do not attempt to disconnect the gas regulator or any gas fitting while your firebowl is in operation. *A dented or rusty propane cylinder may be hazardous and should be checked by your gas supplier prior to use. *Do not use a propane cylinder with a damaged valve and any other worn out parts. *Transit and store the empty gas cylinders carefully and properly. *If you see, smell or hear the hiss of escaping gas from the propane cylinder: 1. Turn off the gas supply and get away from the gas cylinder and the firebowl at once. 2. Do not attempt to correct the problem yourself. 3. Get to your gas supplier and/or the fire department for help. Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. • Young children should be carefully supervised when they are in the area of the appliance. • Clothing or other flammable materials should not be hung from the appliance, or placed on or near the appliance. • Any guard or other protective device removed for servicing the appliance must be replaced prior to operating the appliance. • Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required as necessary. It is imperative that the control compartment, burners and circulating air passageways of the appliance be kept clean. • Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water. • Use only the specific size and capacity of the cylinder noted. • A statement that the LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LPgas cylinders of the U.S. Department of Transportation (DOT). • This appliance shall be used only outdoors in a well-ventilated space and shall not be used in a building, garage or any other enclosed area as the instructions state. •How to disconnect a gas bottle Turn OFF control knob and LP cylinder valve. Turn coupling nut counterclockwise by hand only - do not use tools to disconnect. Loosen cylinder screw beneath bottom shelf, then lift LP cylinder up and out of shelf. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. • Storage of an appliance indoors is permissible only if the cylinder is disconnected and removed from the appliance. Cylinders must be stored outdoors in a well-ventilated area out of reach of children. Disconnected cylinders must have threaded valve plugs tightly installed and must not be stored in a building, garage or any other enclosed area. WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualified installer, service agency or the gas supplier. • The LP-gas supply cylinder must be disconnected when this appliance is not in use • Only cylinder marked “propane” shall be used. Caution: Only use the pressure regulator and hose assembly supplied with this firebowl. Replacement pressure regulator and hose assemblies must be specified . 3 Inspect the hose before each use of the appliance. If the hose shows signs of cracks, abrasions, cuts or damage of any kind, do not operate the appliance. Fix or replace the hose as required before using the appliance. For assistance with repair or replacement of the hose, call Bond Manufacturing at 1-866-771-2663. only replacement parts from the manufacturer. the seller,Use only replacement parts from Use the manufacturer. WARNING ! * Do not light or use gas unit if lava rocks are wet. Ensure lava rocks are completely dry before igniting as intense heat could cause the rocks to crack. * Lava rocks could hit somebody's face or eyes during initial start of this unit, so please keep away from the firebowl for the first 20 minutes after it has been ignited. *LP GAS WARNING: Do not exceed 1/4" depth of fire glass or small lava rocks directly above burner holes. Applying too many lava rocks/fire glass may result in unburned gas pooling in firebowl or firepit. Ventilation is required to allow fresh air into enclosure and any residual gas to escape. *Caution: This heating item should not be used on plastic composite or artificial wood decks. Warranty and Installation Information: We Bond warranty will bewill voided by andby Weand disclaims any responsibility for the following actions: actions: The warranty be voided Bond disclaims any responsibility for the following ► Modification of the firebowl and/or components including the gas valve assembly. ► Use of any component part not manufactured or approved by Bond. us. ► Use and installation other than as instructed in this manual. Accessories 4 Tabulated here below are the description to all parts as shown in above Picture . Item Picture Description Qty 01 Guard 1 02 Thermocouple 1 03 Ground Wire 1 04 Ignition Pin 1 05 Burner Plate 1 06 Main Frame of Fire Table 1 07 Burner Ring 1 08 Nozzle 1 09 Corrugated Pipe 1 Switching Valve 1 Regulator Valve with Gas Hose 1 Control Knob 1 Ignitor 1 Foot 4 ETL Warning Label 1 Wing Screw with Nut 1 10 11 12 13 14 15 16 5 Part G. User's Guide Parts and Accessories of Fire Table / Column. Tabulated herebelow is the User's Guide to various Parts and Accessories to form your complete Fire Table /Column. Before you start to assemble this product, make sure all parts are present. Compare parts with package contents list. If any parts are missing or damaged, DO NOT attempt to assemble the product. CONTENTS Before Beginning Assembly: Item Picture A Description Qty Lava Rocks 1 box AAA Battery B C Panel with door Panel D D Protective Cover E 1 1 1 1 F Panel F 1 G Panel G 1 H Table Top 1 I Metal Stand 1 Description Qty ① Bolt (M6*10MM) 12 ② Screwdriver 1 Hardware Item Picture 6 ASSEMBLY INSTRUCTIONS 1. Check that the Control Knob (13) for the gas supply system is turned to the “OFF” position before starting any assembly. D C 2. Attach panel with door (C) and panel with (D) together using 2pcs of Bolts(01) with Screwdriver(02). Pls do not fully tighten. G c D c 3. Attach panel (G ) to the panel (C) together using 2pcs of Bolts(01) with Screwdriver(02). Pls do not fully tighten. C D 4. Attach panel (F) with Panel (G) and Panel (D) together using 4pcs Bolts(01) with Screwdriver(02). Pls do not fully tighten. 7 5.Put Thank holder insert into the bottom holes . Tighten all Bolts 6.Put the metal base on the bottom of top, make sure the metal box contact with the window of the panel. And tighten the Bolts 7.Fixed the metal base with top using 4pcs of Bolts(01) with Screwdriver(02). And tighten the Bolts 8.Turn over the Gas Fire Pit 8 Part I. USER'S INSTRUCTIONS Tabulated herebelow are the basic steps to help you light and use your Fire Table / Column. STEP1 1. Check that the Control Knob (13) for the gas supply system is turned to the “OFF” position before starting any assembly. STEP 2 2. Open the Door (C) from the Fire Table / Column (C). STEP 3 3. Place 20 lb. Propane Gas Tank (not included) into the Metal Stand (18). Make sure the Propane Gas Tank is placed completely into the Metal Stand (18 ). Turn the preassembled Wing Screw (17) in a clockwise direction in to the Nut (17) to secure the Propane Gas Tank tightly. 9 STEP 7 Subject to your preference, you may pour Lava Rocks / Pumice stones over the Burer Ring. The Guard MUST NOT BE BLOCKED. Refer to guidance below : Note : Do not place more than 1/4 inch depth of lava rocks above the burner holes. Doing so will suffocate the flame. Note : Do not place more than 3KG of lava rocks above the burner holes. Doing so will suffocate the flame. 10 See WARNING and and Figures: Figures: WARNING This screen must be be clear clear and free of obstructions at all times times to to insure insure proper obstructions operation. WARNING The burner of the firebowl firebowl must must be covered by by Otherwise the the flame lava rocks completely. Otherwise may be extinguished. See See the the Figure Figure for may INCORRECT ways ways the CORRECT and INCORRECT for reference. for reference. CORRECT CORRECT INCORRECT INCORRECT Perform Perform leak test in aa well well ventilated ventilated area area outside and where where no no source source of spark can can occur. occur. Remove Remove battery from igniter. Open Open tank tank valve valve fully (counter-clockwise). Turn Turn the the on/off valve valve at at the the unit unit to to the the ‘off’ position position to to pressurize the hose assembly. assembly. Use Use aa soapy water solution to to check check all all the the connections leaks leaks before before attempting attempting totolight lightthe theappliance. appliance. If If aa pressurize leak is found, turn the the tank tank valve off and do do not not use the appliance until until repairs repairs can be made. leak made. TIPS: Before BeforeStarting Starting • •Read Readthe theinstructions instructionsthoroughly. thoroughly. •• Check Check and and make make sure sure that thatall allparts partsare arepresent. present. future reference, reference, save save this thisinstruction instructionmanual. manual. •• For future TO LIGHT LIGHT Before each use, use, inspect inspect the the hose. hose. Replace Replace hose hose ifif there thereare areany anysigns signsof ofcutting, cutting,wear wearororabrasion. abrasion. valve on on the the gas gas tank tank counter-clockwise counter-clockwisetotoopen openthe thegas gassupply. supply. (1) Turn the cylinder valve (2) Close the storing door door on on the the firebowl firebowl for the gas tank. (3) Light the the firebowl firebowl as as below below steps: steps: A. Press Press and and hold hold the the Electric Electric Ignitor. Ignitor. Meanwhile, Meanwhile, push pushand andturn turnthe theControl ControlKnob Knobcounter-clockwise counter-clockwisetotothe the"LOW" "LOW"position. position. the Control Control Knob Knob to to light light the the burner burner .. Keep pushing the release the the Electric Electric Ignitor. Ignitor.Continue Continueto topush pushand andhold holdthe theControl ControlKnob Knobfor for45 45seconds. seconds. B. After ignition, release does NOT NOT immediately immediatelytake takeplace placein inseconds, seconds,push pushand andturn turnthe theControl ControlKnob Knobclockwise clockwise to to "OFF". "OFF". Wait Wait55 C. If ignition does minutes, then then repeat repeat the the lighting lightingprocedure procedureas asabove. above. minutes, Caution: *If *If the the burner burner does does not not ignite ignite with withthe thevalve valveopen, open,gas gaswill willcontinue continuetotoflow flowout outofofthe theburner burnerand andcould couldaccidently accidently with risk risk of of injury. injury. ignite with Observe Observe flame flame height height when whenlit: lit: Flame should should possibly possibly be be aa yellow/blue yellow/bluecolor colorbetween between22 Flame to 10 10 inches inches high. high. to 7 11 TO EXTINGUISH 䥧䢢䢢Push the Control Knob and turn clockwise to the "OFF" position. 䥧䢢䢢Turn the cylinder valve on the gas tank clockwise to close the gas supply if not in use for a long time.(See figure below) ROUTINE CARE 䥧䢢䢢Keep your firebowl free and clear from combustible materials. 䥧䢢䢢Visually inspect burner from obstructions and keep fireplace free and clear from debris. 䥧䢢䢢After the burner and lava rocks are completely cooled down, use a soft brush to get rid of the mild stains, loose dirt and soil. Wipe with a soft cloth. STUBBORN STAINS 䥧䢢Stubborn stains, discoloration and possibly rust pitting can occur from exposure to harsh outdoor conditions. 䥧䢢Be careful not let any powder or solvent come in contact with painted or plastic components as damage may occur. MAINTENANCE 䥧䢢Store the firebowl in a cool dry place away from direct sunlight. 䥧䢢The propane cylinder must be disconnected and removed from the firebowl before the appliance can be stored indoors. 䥧䢢Make sure both the gas and the firebowl are turned off before changing battery. Please refer to the process of assembling battery. 䥧䢢Use Manufacturer approved or supplied replacement parts and accessories only. Otherwise thi s may void the warranty of this product And result in a hazardous condition. 䥧䢢Please contact the Manufacturer for information regarding replacement hoses, thermocouples, ignitors, lava rocks, etc. 12 Helpful Tips If the burner will not light or stay lit, please perform the following checks. It is possible that the Excess Flow Safety Device has been tripped. Turn the control knob to off and close the LP Gas tank valve. Disconnect the regulator. Turn the Control Knob to “HIGH”. Wait a minimum of 5 minutes. Turn burner control knob back to “OFF”. Reconnect the regulator and perform a leak check at tank connection. Turn the LP Gas tank valve on slowly, wait 30 seconds and then light the outdoor fire table. To ensure proper ignition make sure the igniter pin is properly positioned and connected. - The igniter pin should be pointed straight to the thermocouple. - The thermocouple should be positioned 5mm away from the burner tube. If wires are too close, or tangled, they could short. Make sure they are spaced apart from each other. Make sure the wires are fully inserted into the ignitor box. Make sure that the pilot housing is unobstructed. Clear any debris on top of the pilot housing and make sure there is no debris between the igniter pin, thermocouple and the burner tube. 13 Troubleshooting Problem: Burner will not light using igniter Please review the Helpful Tips on page 15 for common fixes to this problem. Possible Cause 1: Electrode and burners are wet. -Wipe dry with cloth. Possible Cause 2: Igniter battery is dead or backwards. -Check that the AAA battery is inserted correctly in the igniter (see page 10) or replace the battery. Make sure the plastic wrap on the battery has been removed. Possible Cause 3: Igniter Pin c racked or broken - sparks at crack. -PLS contact retailer for technical support. Possible Cause 4: Bad Igniter -PLS contact retailer for technical support. Problem: Burner will not light with match Possible Cause 1: No Gas Flow -Check if the LP gas tank is empty. If empty, replace and refill. If the propane tank is not empty, refer to “Problem: Sudden drop in gas flow” on the following page. Possible Cause 2: Coupling nut and regulator not fully connected. -Turn the coupling nut about one half to three fourths a turn, until you feel a solid stop. Do not use tools, tighten by hand only. Possible Cause 3: Obstruction of gas flow. Coupling Nut - Check for bent or kinked hose. Possible Cause 4: Spider webs or insect nest in the venturi. - Clean the venturi. Venturi Possible Cause 5: Burner ports clogged or blocked. -Reference “Problem: Irregular flame pattern” on the following page. Clean the burner ports as described there. Problem: The fireplace emits a lot of black smoke when in use Possible Cause 1: Hose from gas fireplace is pinched. -Make sure the hose is not pinched between the fire table and the source of the gas. Possible Cause 2: Flame is being obstructed at burner ports. -Make sure that the gas ports on the burner are free of any lava rocks/fire glass so that the flame can flow naturally. Possible Cause 3: Mixing chamber of the burn tube is blocked or obstructed. -Clear out the mixing chamber located before the Venturi. 14 Troubleshooting Problem: Sudden drop in gas flow, or a reduced flame height Possible Cause 1: Out of Gas. -Check for gas in the LP gas tank. Possible Cause 2: Excess flow safety device may have been activated. -Turn control knob to “OFF”, wait 30 seconds and light outdoor fire table. If flames are still too low, reset the excessive flow safety device by turning off the control knob and LP gas tank valve. Disconnect regulator. Turn burner control knob to “HIGH”. Wait at least 5 minutes. Turn burner control knob off. Reconnect regulator and perform a leak check at tank connection. Turn LP gas tank valve on slowly, wait 30 seconds and then light outdoor fire table. Problem: Irregular flame pattern, flame does not run the full length of the burner Possible Cause: Burner ports are clogged or blocked. -Clean burner ports. Do this by inserting a paperclip into each of the burner ports to ensure they are not clogged. WARNING: Make sure burner is not on, and has had sufficient time to cool before touching it. Problem: Flame blow out Possible Cause 1: High or gusting winds. -Increase flame to “HIGH” setting. Possible Cause 2: Low on LP gas. -Replace or refill LP gas tank. Possible Cause 3: Excess flow valve tripped. -Refer to “Problem: Sudden drop in gas flow” Problem: Flame seems to lose heat when burning in cold weather temperature below 50°F Possible Cause 1: Ice has built up on the outside of the LP gas tank because the vaporization process is too low. -Turn the control knob and the LP gas tank to “OFF”. Replace with a spare LP gas tank and resume burning. Store the spare LP gas tank in a well ventilated area, away from children. If these trouble shooting steps are unable to resolve the problem, PLS contact retailer for technical support. 15
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project