mighty mac™ led

PROJECT INFORMATION
MIGHTY MAC™
Job Name
Fixture Type
TCD SERIES
Catalog Number
PRODUCT FEATURES:
Approved by
»» Corner mount, hinged door
»»Available in 8"× 24" and 48" lengths
SPECIFICATIONS:
HOUSING: One-piece seam welded type 304 stainless steel construction. See Ordering Information for gauge and finish.
LENS: As specified ­– maximum inner/outer lens combination thickness .500" – see Ordering Information. Lens sealed to door with silicone caulk and secured with continuous lens retention angles.
Kenall recommends a prismatic inner lens and a clear outer lens. Two clear lenses used in combination cannot be provided.
LENS RETENTION: Vertically adjustable continuous brackets – prime grade material. Secured to door with thru-studs.
DOOR: Type 304 stainless steel construction. See Ordering Information for gauge and finish. Door sealed to housing with closed-cell neoprene gasketing.
HINGE: Continuous heavy gauge stainless steel piano type hinge. Hinge welded to door and secured to housing.
FASTENERS: Torx® Head stainless steel fasteners standard. See Options for stainless steel center-pin reject Allen Head (AH) or Phillips Head (PH) fasteners.
FINISH: Brushed stainless steel finish (#4) or white TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%.
LAMPS: Quantity and type as specified – see Ordering Information. Lamps supplied by others.
ELECTRICAL: LED only: Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current
driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range. Electronic ballast <10% THD standard. See Ordering Information for multiple ballasts and optional equipment. Lamps
by others.
INSTALLATION: For housing without wiring and mounting holes, see Field Drilled Installation Holes Option (FDIH).
PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
WARRANTY: Limited five (5) year warranty.
LISTINGS: UL and CUL listed for Wet Location. LED only: Luminaire is certified to UL 1598 and UL 8750 standards by Intertek Testing Services. See ordering information for wet location applications.
Kenall certifies product by both Underwriters and Intertek Testing Laboratories.
LED
C
ORDERING INFORMATION (Ex: TCD-4-4/A-90L50K-DCC-DV-7/G-FS)
Model
Size
TCD
Nominal Size
28"×24"
48"×48"
Housing/Door Material
3
14-Ga SS (Painted)
4
16-Ga SS (Painted)
A
18-Ga SS (Painted)
6
14-Ga SS (Brushed)
7
16-Ga SS (Brushed)
B
18-Ga SS (Brushed)
Lamp Quantity (n/a with LED)
1
One
2Two
3Three (F17T8 and F32T8 only)
Hsg./Door Material
Lamp Qty
Lamp Type
Ballast Type
Ballast Qty
Voltage
Lens
/
/
Lamp Type
2' Nominal Length
17 F17T8
40BF40TT
Ballast Quantity (n/a with LED)
1One
2Two
Voltage
120 120 Volts
277 277 Volts
347I 347 Volts
DV 120-277 Volts
4' Nominal Length
45L35K45 Watt 3500K LED
45L40K45 Watt 4000K LED
45L50K45 Watt 5000K LED
67L35K67 Watt 3500K LED
67L40K67 Watt 4000K LED
67L50K67 Watt 5000K LED
90L35K90 Watt 3500K LED
90L40K90 Watt 4000K LED
90L50K90 Watt 5000K LED
32 F32T8
44F48T8HO
Ballast/Driver
DCC Dimming Constant Current (LED only)
IS
Instant Start Electronic <10% THD (T8,T8HO)
RS Rapid Start Electronic <10% THD (CFL,T8,T8HO)
SB Specified Ballast
www.kenall.com
Options
P: 800-4-Kenall
Lens (Inner/Outer)‡
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G
.125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
TG .156" Textured Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
8
.187" Clear Tempered Glass
9
.250" Clear Polycarbonate
A
.250" Clear Tempered Glass
B
.375" Clear Polycarbonate
C
.375" Clear Tempered Glass
F: 262-891-9701
Options
ELI† Standard Lumen EL Pack
PELI†High Lumen EL Pack
SEL† Specified EL Pack
AH Allen Head fasteners
FDIH Field Drilled Installation Holes
FS Single Fuse & Holder
KO Two 1/2" EMT Conduit Entry
Knockouts(one per end cap)
PH Phillips Head fasteners
SSIN Stainless Steel Interior
‡ Refer to Lens specifications
n/a with LED
† 25°C max ambient
I
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
TCD-011416
For additional photometry, go to www.kenall.com
MIGHTY MAC™
TCD SERIES – Technical Data
PERFORMANCE
Initial Delivered Lumens
Lamp Type
@ 25°C
Efficacy
(lm/W)
Input Power
(W)
Drive Current
(mA)
Estd. L70
LED Life (Hrs)
45L35K
3472
69
50
94
80,000
45L40K
3701
74
50
94
80,000
45L50K
3850
77
50
94
80,000
67L35K
4977
67
74
66
80,000
67L40K
5306
72
74
66
80,000
67L50K
5518
75
74
66
80,000
90L35K
6330
64
99
94
60,000
90L40K
6749
68
99
94
60,000
90L50K
7018
71
99
94
60,000
Displayed information is for selected luminaires only. Additional wattages and color temperatures are also available.
Visit www.kenall.com for additional information.
Model: CD-4-1/1-1-45L40K-DCC-1-DV-Y/B-1
Model: CD-4-1/1-1-67L40K-DCC-1-DV-Y/B-1
1822
2612
1367
1959
911
1306
2
2
456
653
1
1
Maximum Candela = 1822 Located At Horizontal Angle = 0, Vertical Angle = 45
Maximum Candela = 2612 Located At Horizontal Angle = 0, Vertical Angle = 45
1 - Vertical Plane Through Horizontal Angles (0-180) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (45) (Through Max. Cd.)
1 - Vertical Plane Through Horizontal Angles (0-180) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (45) (Through Max. Cd.)
DIMENSIONAL DATA
2.75"
(4) .62" (1.57 cm) Mounting Holes
6.99 cm
Ø2.00" (Ø5.08 cm) Wiring K.O.
8.00"
20.32 cm
6.43"
16.33 cm
2.75"
(4) .62" (1.57 cm) Mounting Holes
6.99 cm
Ø2.00" (Ø5.08 cm) Wiring K.O.
8.00"
20.32 cm
8.00"
20.32 cm
6.43"
16.33 cm
12.00"
30.48 cm
2.75"
6.99 cm
19.50"
49.53 cm
25.37"
64.44 cm
(6) .62" (1.57 cm) Mounting Holes
Ø2.00" (Ø5.08 cm) Wiring K.O.
8.00"
20.32 cm
8.00"
20.32 cm
6.43"
16.33 cm
21.75"
55.25 cm
8.00"
20.32 cm
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
43.50"
110 cm
49.37"
125 cm
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
TCD-011416
Download PDF
Similar pages