C 100.6, C 110.4, C 110.4 X-TRA, C 105.6, C 120.6 X-TRA

C 100.6, C 110.4, C 110.4 X-TRA,
C 105.6, C 120.6 X-TRA
User Manual
128700022 e (09.2014)
EN-DA-NO-SV-FI-DE-FR-NL-IT-ES-PT-EL-TR-CSHU-PL-HR-SL-SK-LV-LT-ET-RU-ZH
EN
DA
NO
SV
FI
DE
FR
NL
IT
ES
PT
EL
TR
CS
HU
PL
HR
SL
SK
LV
LT
ET
RU
ZH
User Manual........................................... 3- 16
Instruktionsbog.......................................17
-30
Instruksjonsbok......................................31
-44
Instruktionsbok.......................................45
-58
Käyttöohje..............................................59
-72
Betriebsanleitung....................................73
-87
Instructions d’utilisation.......................... 88-103
Gebruiksaanwijzing................................104-118
Istruzioni sull’uso....................................119-133
Instrucciones de manejo........................134-148
Instruções de operação..........................149-163
Οδηγίες χρήσης......................................164-179
Kullanım Kılavuzu...................................180-194
Návod k obsluze.....................................195-208
Használati útmutató................................209-223
Instrukcja użycia.....................................224-238
Priručnik za korisnike.............................239-252
SL Navodila za uporabo.........................253-266
Návod na používanie..............................267-281
Lietošanas instrukcijae...........................282-295
Naudojimosi instrukcija...........................296-309
Kasutamisjuhend....................................310-323
Руководство..........................................324-339
操作说明...............................................340-350
EN
DA
NO
Contents
SV
FI
1
Introduction .................................................................................................. 4
DE
1.1 Symbols used to mark instruction .......................................................................4
2
Safety precautions and working techniques ................................................4
3
Before you start using your high pressure washer ................................ 10
4
3.1 Mounting of trolley handle and wheels .............................................................10
3.2 Mounting of quick coupling ...............................................................................10
NL
Operating your high pressure washer ..................................................... 11
IT
4.1
4.2
4.3
4.4
5
FR
Connection of high pressure hose ....................................................................11
Mounting of spray lance and Click&Clean nozzles ...........................................11
Water Connection .............................................................................................11
Starting the high pressure washer ....................................................................12
ES
PT
After using the pressure washer .............................................................. 12
5.1 Stopping the high pressure washer ..................................................................12
6
Maintenance ............................................................................................... 13
7
Troubleshooting ......................................................................................... 13
8
Warranty Conditions ................................................................................. 14
9
Main technical Data ................................................................................... 15
EL
TR
CS
HU
10 Declaration of Conformity ......................................................................... 16
PL
HR
SL
SK
LV
LT
ET
RU
ZH
Original Instructions
3
1 Introduction
EN
1.1 Symbols used to mark instruction
DA

All pictograms attached to the high pressure washer and its components are shown and explained in this manual.
NO
Safety instructions marked with this symbol must be observed to prevent personal injury or
serious damage to property.
SV
FI
Caution where there is a risk of damaging the machine or its individual components.
DE
This symbol indicates tips and instructions to simplify work and to ensure a safe operation of
the high pressure washer.
FR
2 Safety precautions and working techniques
NL
Before starting up your machine for the first time, this instruction manual must be read through
carefully. Save the instructions for later use.
IT
ES
WARNING!
PT
• Inhalation of aerosols can be hazardous to health.
Where applicable use a device in order to avoid or reduce aerosols production, e.g., a shield covering the
nozzle. For protection against aerosols use a respiratory mask of class FFP 2 or higher.
• The high water pressure generated by the machine
and the power connection are particular sources of
danger.
• Children should be supervised to ensure that they do
not play with the machine.
• Before starting up your machine please check it carefully for any defects. If you find any, do not start up
your machine, contact your Nilfisk distributor. The insulation of the electric cable should be faultless and
without any cracks. If the electric cable is damaged,
an authorized Nilfisk distributor should replace it.
• The operator and anyone in the immediate vicinity of
the site of cleaning should take action to protect themselves from being struck by debris dislodged during
operation.
• Always unplug the power plug before cleaning or
maintenance and when replacing parts or converting
Original Instructions
1
EL
TR
CS
HU
PL
HR
SL
SK
LV
LT
ET
RU
ZH
the machine to another function.
• Observe the national safety regulations issued, for
example, by the employers liability insurance association, social security institutions, occupational safety
and health authorities or other organizations.
EN
DA
NO
SV
Accessories and spare parts
• To ensure the machine safety only use original spare
parts from Nilfisk or approved by Nilfisk.
• High pressure hoses, fittings and couplings are important for the safety of the machine. Only use hoses, fittings and couplings recommended by Nilfisk.
FI
DE
FR
NL

IT
ES
PT
EL
TR
Physical, sensory or mental conditions
• This machine is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities or lack of experience and
knowledge.
• Anyone who has consumed alcohol, medicines or
drugs affecting their ability to react must not operate
the machine.
Applications
This machine has been developed for domestic use
such as:
• Car, motorbike, boat, caravan, trailer, patio/drive/flagstones, woodwork, brickwork, barbecue, garden furniture, lawn mower.
Any other use is considered as improper use. Nilfisk
accepts no liability for any damage resulting from such
use. The risk for such use is borne solely by the user.
Proper use also includes proper operation, servicing
and repairs as specified in this instruction.
CS
HU
PL
HR
SL
SK
LV
Clothing and equipment
Always take action to protect yourself when operating
the machine.
• Wear shoes with non-slip soles.
• Wear goggles, ear protection and protective clothes
during operation.
LT
ET
RU
ZH
2
Original Instructions

Transporting the high pressure washer
• When transporting the machine in or on a vehicle, it
must be secured, e.g. with straps, so that it cannot slip
or tip over.
• Nilfisk recommends that the machine is positioned
horizontally on the backside, when transported in or
on a vehicle.
EN
DA
NO
SV
FI
Detergents
• This machine has been designed for use with cleaning agents supplied or recommended by Nilfisk. The
use of other cleaning agents or chemicals may adversely affect the function of the machine.


DE
FR
NL
Before starting the work
Inspecting the machine
• Do not use the machine if a supply cord or important
parts of the machine are damaged, e.g., safety device, high pressure hose, and spray handle and spray
attachments.
• The trigger of the spray handle must move easily and
automatically return to its starting position when released.
• Always keep high pressure hose and spray attachment in good condition (clean, moving easily) and correctly assembled.
IT
ES
PT
EL
TR
CS
HU
PL
Electrical connection
HR
WARNING!
SL
Minimize the risk for electrical shock:
• Voltage and frequency of the machine (see rating
plate) must match the voltage of and frequency of the
mains supply.
• Only connect the machine to electrical installation
made by a certified electrician and comply with IEC
60364-1.
• It is recommended that the electrical supply to the
machine should include a residual current device that
will interrupt the supply if the leakage current to earth
Original Instructions
SK
LV
LT
ET
RU
ZH
3
exceeds 30 mA for 30 ms.
• Inadequate extension cables can be dangerous. If an
extension cable is used, it shall be suitable for outdoor
use, and the connection has to be kept dry and off the
ground
• Nilfisk recommends use of an extension cable drum
when cable extension is needed which keeps the
socket at least 60 mm above the ground.
• Cables on extension cable drums should always be
completely unwound to prevent overheating. Extension cables must comply with the below-mentioned requirements for length and cable dimensions:
EN
DA
NO
SV
FI
DE
FR
1.0 mm²
1.5 mm²
2.5 mm²
NL
IT
Max.
Max.
Max.
12.5 m
20.0 m
30.0 m
• If the electric cable is damaged, it must be replaced
by an authorized Nilfisk distributor or similar qualified
person in order to avoid a hazard.
ES
PT
Water connection
• This high pressure washer is only allowed to be connected with the drinking water mains, when an appropriate backflow preventer has been installed, Type BA
according to EN 60335-2-79.
• The backflow preventer can be ordered under number
106411177.
• As soon as drinking water has flown through the backflow preventer, it is no longer regarded as drinking
water.
• Operation by suction (e.g. a rainwater vessel) is carried out without a backflow preventer – see “Connecting to a pressureless water supply”.
EL
TR
CS
HU
PL
HR
SL
SK

LV
LT
ET
RU
IMPORTANT !
• Only use water without any impurities.
• If there is a risk of running sands in the inlet water
(i.e. from your own well), an additional filter should be
mounted.
ZH
4
Original Instructions
During work
EN
WARNING!

DA
• Never use the machine in an environment where there
could be a danger of explosions. If any doubt arises
contact the local authorities.
• It is not allowed to clean asbestos-containing surfaces
with high pressure.
• Never draw in fluids containing solvents (e.g., gasoline, heating oil, paint thinner or acetone) These substances damage the materials used in the machine.
Their spray is highly combustible, explosive and poisonous.
• Never direct the water jet at yourself, other persons,
not even to clean clothing or footwear - risk of injury.
• Never direct the water jet at pets or other animals.
• Never direct the water jet at live electrical equipment
or the machine itself - danger of short-circuiting.
• Hold the spray lance firmly with both hands. The spray
lance is affected by a thrust of up to 16.4 N during
operation.
• This high pressure washer machine must not be operated at temperatures below 0°C.
• Never start up a frozen machine. Frost damages are
not covered by the guarantee!
• Always ensure firm and safe footing.
• Keep the machine as far away as possible from the
object being cleaned.
• Always adjust the distance and thus the pressure of
the nozzle to the surface, which is to be cleaned to
avoid any damage to the surface being cleaned.
• The machine shall be operated in an upright position.
• Do not cover the machine or use it in a room without
adequate ventilation.
• If the machine is left or not used for 5 minutes, it must
be switched off on the start/stop switch "O" (1).
NO
SV
FI
DE
FR
NL
IT
ES
PT
EL
TR
CS
HU
PL
HR
SL
SK
LV
LT
ET
RU
ZH
Original Instructions
5
After finishing the work
EN
WARNING!
DA
• Always switch off the machine and unplug the power
plug from the socket after work and when leaving the
machine unattended.
• Disconnect water inlet hose between machine and
water supply.
• Wind up electrical cable and high pressure hose – to
avoid damage of cable, plug, high pressure hose and
fittings.
• Always empty pump, hose and accessories of water
after use of the machine and prior to storing.
NO
SV
FI
DE
FR
NL
IT
Maintenance and repairs
ES
WARNING!
• Always disconnect the electrical plug from the socket
prior to maintenance, cleaning and repair.
• Any repair should always be made in Nilfisk
authorized workshop with original Nilfisk spare parts.
• Do not attempt any maintenance not described in the
instructions.
• If the machine refuses to start, stops, pulsates, pressure fluctuates, motor busses, fuse blows or no water comes out, check the trouble shooting diagram
in these instructions. In case other problems occur,
please contact your local Nilfisk distributor.
PT
EL
TR
CS
HU
PL
HR
Recycling the high pressure washer
Make the old machine unusable immediately.
• Unplug the machine.
• Cut the electric cable.
Do not discard electrical appliances with household
waste. As specified in WEEE Directive 2012/19/EC on
old electrical and electronic appliances, used electrical
goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest
dealer for further information.
SL
SK
LV
LT
ET
RU
ZH
6
Original Instructions
EN
3 Before you start using your high pressure washer
See the pictorial quick reference guide – unpacking.
Illustration shows the operation elements and how to prepare your machine for use.
A
DA
NO
Operation elements
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
SV
FI
DE
FR
NL
IT
ES
PT
EL
Start/stop switch
Water inlet with filter (2a)
High pressure connection
High pressure hose
Electric cable
Click&Clean spray lance
Spray handle with lock (7a)
Click&Clean Tornado nozzle (C 100.6, C 105.6 and C 110.4)
Click&Clean Tornado PR nozzle (C 120.6)
Click&Clean Powerspeed nozzle
Foam sprayer
Nozzle cleaning tool
Accessory storage
Model tag
Trolley handle
Holder for hose/electric cable (C 100.6-6, C 110.4 and C 120.6)
Hexagon key for handle and bracket mounting
Wheel brackets
Wheels
Wheel caps
3.1 Mounting of trolley handle and wheels
Mounting of trolley handle
TR
Only applicable for models with trolley handle and wheels (C 100.6-6, C 110.4, C 110.4 X-TRA
and C 120.6 X-TRA)
A1 Place the trolley handle (15) on the machine.
A2 Secure the handle by mounting the 2 screws using the enclosed hexagon key (17).
CS
HU
Mounting of wheel brackets
PL
A3
A4
A5
HR
A6
Place the wheel brackets (18) on the machine.
Secure the wheel brackets by mounting the 2 screws, using the enclosed hexagon key.
Place the wheels (19) on the wheel axel – push into position – you should hear a click
when the wheels are in correct position.
Secure the wheels by mounting the wheel caps (20) – you should hear a click when the
wheel caps are in correct position and the wheel is secured.
SL
3.2 Mounting of quick coupling
SK
A7
LV
A8

LT
ET
When mounting the quick coupling for the first time, check that the factory fitted filter (2a)
is positioned in the water inlet pipe.
Screw the quick coupling tight on to the water inlet (2).
IMPORTANT!
The inlet filter must always be fitted in the water inlet pipe to filter out sand, limestone and
other impurities as these will damage the pump valves. The filter is factory fitted.
If the filter is removed this will invalidate the guarantee.
RU
ZH
10
Original Instructions
4 Operating your high pressure washer
B
EN
DA
See the pictorial quick reference guide – operating your high pressure washer.
NO
4.1 Connection of high pressure hose
B1
Attach the high pressure hose (4) to the spray handle (7). Detach the high pressure hose
by pressing the pawl (A).
B2 Mount the high pressure hose on the outlet (3).
SV
FI
4.2 Mounting of spray lance and Click&Clean nozzles
B3
DE
Push the spray lance (6) into the spray handle and screw it on.
FR
NOTE!

The spray lance has a built-in low pressure nozzle that can be used for flushing away
dirt.
B4 When attaching the nozzles (8, 9, 10), press the nozzles into the spray lance.
NL
IT
IMPORTANT!
When attaching the click & Clean nozzles, the pawl on the side of the spray lance should come
out again. The nozzle should stay in position when pulling it.
B5 Push the foam sprayer (11) into the spray lance.
ES
PT
NOTE!
EL

The foam sprayer features a swivel lock, which must be positioned in the hole in the Click &
Clean spray lance. Press the pawl to detach the Click & clean nozzles and the foam sprayer.
TR
IMPORTANT!
Before starting the cleaning job, check that the machine is in an upright position and placed on
an even surface. Do not place the machine in high grass!
CS
HU
4.3 Water Connection

PL
IMPORTANT!
HR
Connecting to pressurized water supply
The inlet water max. pressure is 1 MPa/10 bar and the max. temperature is 40°C – see rating
plate. An ordinary ½” garden hose of min. 10 m and max. 25 m will be suitable.
B6
B7
Check that the filter is fitted in the water inlet pipe and that it is not clogged up.
Connect the water hose to the water supply by means of the quick connector. Turn on the
water.
SK
LV
Connection to the drinking water mains according to national and local regulations.
Let the water run through the water hose before connecting it to the machine to prevent sand
and dirt from penetrating the machine.
B8 Turn off the water and connect the water hose by means of the quick coupling to the water inlet.
Connecting to pressure less water supply
The machine can also operate in suction mode, meaning that you can connect the machine to
e.g. rainwater vessels, rivers, lakes and cisterns etc. When taking in water from non drinking
water mains the backflow preventer is not needed.
Original Instructions
SL
11
LT
ET
RU
ZH

EN
DA
When connecting the machine to operate from pressure less water supplies – always use additional filtering to secure that impurities are not sucked in. Hose length should be max. 3 meter
and of minimum ½".
To meet these requirements, Nilfisk recommends that you use the original Nilfisk suction hose
kit.
NO
The Machine is designed for suction up to 50 cm above water surface.
• Position the machine at max. 0.5 meter above water surface. Detach the high pressure hose
from the outlet.
• Ensure that the inlet filter is in position and attach the suction hose kit, secure tight connection to the inlet.
• Turn on the machine, pressing the start/stop switch (1) into position "I".
• Wait until a steady jet exits the outlet.
• Switch off the machine and attach high pressure hose (4), spray handle, lance and nozzle.
• Start the machine again and activate the spray handle.
SV
FI
DE
FR
4.4 Starting the high pressure washer

NL
IT
IMPORTANT!
Connecting to mains power supply
The voltage and frequency of the machine (see model tag (14)) must match the voltage and
frequency of the power supply.
ES

PT
EL
B9 Insert the power plug into power supply socket.
B10 Turn on the water.
B11 Release the trigger lock (7a). Remember to unplug, turn off the high pressure washer and
lock the trigger, when leaving the high pressure washer unattended
B12 Activate the trigger of the spray handle and let the water run until all air has escaped from
the water hose.
B13 Turn on the machine, pressing the start/stop switch into position “I”.
B14 Activate the trigger of the spray handle. When releasing the trigger of the spray handle,
TR
the machine automatically stops. The machine will start again when you reactivate the
trigger of the spray handle.
CS
HU
5 After using the pressure washer
PL
C
HR

SL
SK
See the pictorial quick reference guide – storing the high pressure washer.
The high pressure washer should be stored in a frost free room! Should the machine by a mistake be frozen, it will be necessary to check it for damages.
5.1 Stopping the high pressure washer
LV
C1
LT
C2
C3
ET
C4
C5
RU
Shut off the water supply and activate the trigger of the spray handle and let the machine
run until no more water runs out of the nozzle. This will wash out water hose, high pressure hose, spray lance and nozzles.
Stop the machine, pressing the start/stop switch into position “0”.
Unplug the machine from the power supply socket and wind up the electrical cable (5)
and place it on the holder (16).
Rinse the spray lance, nozzles and the foam sprayer after use.
Place spray handle, lance, nozzles, foam sprayer and other accessories in the holders on
the high pressure washer.
ZH
12
Original Instructions
6 Maintenance
D
EN
DA
See the pictorial quick reference guide - maintenance.

NO
To ensure a long and problem free working life of the high pressure washer, please take the
following advices:
•
•
•
•
•
SV
Wash out water hose, high pressure hose, spray lance and accessory before mounting
Clean the connectors of dust and sand
Rinse the detergent bottle and the detergent nozzle
Clean the nozzle
Keep the water inlet filter clean and unclogged
FI
DE
Cleaning of the water inlet filter
D1 Clean the water inlet filter regularly once a month or more frequently according to use.
Carefully loosen the filter with a screwdriver and clean it. Check that it is intact before remounting it.
NL
Cleaning of nozzle

FR
A clogging up in the nozzle causes a pump pressure which is too high, why cleaning is required immediately.
IT
IMPORTANT!
ES
The nozzle cleaning tool (12) should only be used when the nozzle is detached and the machine is stopped!
D2 Stop the machine and disconnect the nozzle. Clean the nozzle.
D3 Flush the nozzle backwards with water.
PT
EL
Cleaning of machine vents
D4
The machine should be kept clean so as to let cooling air pass freely through the machine vents.
TR
Greasing of O-rings
D5
CS
To ensure an easy connection and that O-rings do not dry up the couplings should be
greased regularly.
HU
7 Troubleshooting
PL
To avoid unnecessary disappointments, you should check the following before contacting the Nilfisk service
organization.
Symptom
Machine refuses to
star
Fluctuating pressure
Cause
Plug in machine
Try another socket.
Replace fuse. Switch off other machines.
Try without the extension cable.
Pump sucking
Check that hoses and connections are airtight.
Clean and replace or refer to local Nilfiskdistributor.
Clean and replace or refer to local Nilfiskdistributor.
Valves dirty, worn out or stuck
Pump seals worn out
SL
Recommended action
Machine not plugged in
Defective socket
Fuse has blown
Defective extension cable
HR
SK
LV
LT
ET
RU
ZH
Original Instructions
13
EN
Symptom
DA
Machine stops
Cause
Fuse has blown
Incorrect mains voltage
NO
Thermal sensor activated
SV
Nozzle partially blocked
Replace fuse. Switch off other machines.
Check that the mains voltage corresponds
to specification on the model tag.
Leave the washer for 5 minutes to cool
down.
Clean the nozzle (see section 6.2)
Fuse blows
Fuse too small
Change to an installation higher than the
amp. consumption of the machine.
You may try without the extension cable.
Machine pulsating
Air in inlet hose/pump
FI
DE
Recommended action
FR
Inadequate supply of mains
water
NL
Nozzle partially blocke
Water filter blocked
Hose kinked
Allow machine to run with open trigger until
regular working pressure resumes.
Check that the water supply corresponds to
specifications required (see model tag)
NB! Avoid using long, thin hoses (min. 1/2")
Clean the nozzle (see section 6.2)
Clean the filter (see section 6.1)
Straighten out hose.
Machine often starts
and stops by itself
Pump/spray handle is leaking
Contact your nearest Nilfisk Service Centre.
Machine starts, but no
water comes out
Pump/hoses or accessory
frozen
No water supply
Water filter blocked
Nozzle blocked
Wait for pump/hoses or accessory to thaw.
IT
ES
PT
EL
TR
In case problems other than the above occur, please contact your local Nilfisk distributor. Local Nilfisk distributors are listed on the back cover of this instruction.
CS
HU
Connect inlet water.
Clean the filter (see section 6.1)
Clean the nozzle (see section 6.2)
Customer Service at Penrith – 01768 868995
8 Warranty Conditions
PL
Nilfisk guarantees high pressure washers for domestic use for 2 years. If your high pressure washer or accessories are handed in for repair, a copy of the receipt must be enclosed.
Guarantee repairs are being made on the following conditions:
• that defects are attributable to flaws or defects in materials or workmanship. (wear and tear
as well as misuse are not covered by the guarantee).
• that the directions of this instruction manual have been thoroughly observed.
• that repair has not been carried out or attempted by other than Nilfisk-trained service staff.
• that only original accessories have been applied.
• that the product has not been exposed to abuse such as knocks, bumps or frost.
• that only water without any impurities has been used.
• that the high pressure washer has not been used for rental nor used commercially in any
other way.
HR
SL
SK
LV
LT
Repairs under this guarantee include replacement of defective parts, exclusive of packing and postage/carriage. Besides, we refer to your national law of sale.
ET
The machine should be forwarded to one of the service centres of the Nilfisk organisation with description/
specification of the fault.
RU
Repairs not covered by the guarantee conditions will be invoiced. (I.e. malfunctions due to Causes mentioned in section Troubleshooting Chart of the instruction manual).
ZH
14
Original Instructions
9 Main technical Data
Type
Electric specifications
Rated voltage
Rated frequency
Rated power consumption
Current
Protection class
EN
C 100.6
C 105.6 C 110.4
C 120.6
DA
V
Hz
kW
A
Class I/
Class II
IP xx
220-240
120
50/60
60
1.3
5.7
11
Class II
Class II
Class II
Class II
IPX5
IPX5
IPX5
IPX5
Protection degree
Hydraulic specifications
Rated pressure
Max. pressure
Rated water flow
Max. water flow
Max. water inlet pressure
Max. water inlet temperature
Max. water inlet temp. suction mode
MPa/bar
7/70
7/70
MPa/bar 10/100
9/90
l/min/l/h
5.3/320
l/min/l/h
7.3/440
Mpa/bar
1/10
°C
40
°C
20
Weight
kg
Hand-arm vibration according to
m/s2
ISO 5349-1: Standard nozzle
Sound pressure level LpA in accorddB(A)
ance with ISO 3744
Guaranteed sound power level LWA
dB(A)
in accordance with 2000/14/EC
220-240 220-240 220-240
120
50/60
50/60
50/60
60
1.4
1.4
1.4
6.1
6.1
6.1
12
5.1 (6.1)*
7.5/75
8/80
10.5/105 10/110
5.2/310 5.2/310
7.3/440 7.3/440
1/10
1/10
40
40
20
20
5.5
6.1(6.5)**
NO
SV
FI
8.5/85
8/80
12/120 10/100
5.2/310 5.3/320
7.3/440
1/10
40
20
DE
FR
NL
IT
6.7
ES
< 2.5 ±1
< 2.5 ±1 < 2.5 ±1
< 2.5 ±1
74 ±3
74 ±3
74 ±3
74 ±3
PT
90
90
90
90
EL
We reserve the right to make alterations.
* C 100.6-6, ** C 110.4 X-TRA
TR
CS
HU
PL
HR
SL
SK
LV
LT
ET
RU
ZH
Original Instructions
15
EN
10 Declaration of Conformity
DA
We,
Nilfisk-Advance A/S
Sognevej 1
DK-2605 Broendby
DENMARK
NO
SV
Hereby solely declare, that the product:
FI
DE
Product
Description
Type
HPW - Consumer
220 - 240 V 1~, 50/60 Hz –
IP X5
Nilfisk C 100.6 / C 105.6 / C 110.4 /
C 120.6
and accessory variants of abovementioned types
FR
NL
Is in compliance with the following standards:
Id and Version
Title
EN 60335-1:2012
Household and similar electrical appliances - Safety - Part 1: General
requirements
EN 60335-2-79:2012
Household and similar electrical appliances - Safety - Part 2-79:
Particular requirements for high pressure cleaners and steam cleaners
EL
EN 55014-1:2006+
A1:2009+A2:2011
Electromagnetic compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 1: Emission
TR
EN 55014-2:1997+A1:2001
+A2:2008
Electromagnetic compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 2: Immunity - Product family
standard
EN 61000-3-2:2006+A1:2009
+A2:2009
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current < = 16 A per phase)
EN 61000-3-3:2008
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current < = 16 A per phase
and not subject to conditional connection
IT
ES
PT
CS
HU
PL
HR
Following the provisions of:
SL
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
RoHS Directive 2011/65/EC
SK
Noise Emission Directive 2000/14/EC – Conformity assessment procedure according to Annex V.
Measured noise level: 74 dB; Guaranteed noise level: 90 dB
Ecodesign requirements for standby and off mode 1275/2008/EC
LV
LT
Hadsund
01-01-2013
Anton Sørensen
GM – Technical Operations & Hadsund
Place
Date
Name, Title
ET
Signature
RU
ZH
16
Original Instructions
14
2a
3
2
O
A1
A2
A3
A4
A5
A6
I
A7
A8
18
20
19
B1
B2
B6
B7
B10
Max. 40°C
B3
B4
B5
Max. 40°C
B11
B12
O
B8
B­9
B13
B14
I
C1
C1
C2
C3
C3
C4
C5
C5
D1
D5
D2
D3
D4
http://www.nilfisk.com
HEAD QUARTER
DENMARK
Nilfisk-Advance Group
Sognevej 25
DK-2605 Brøndby
Tel.: (+45) 4323 8100
E-mail: mail.com@nilfisk-advance.com
HUNGARY
Nilfisk-Advance Kereskedelmi Kft.
II. Rákóczi Ferenc út 10
2310 Szigetszentmiklos-Lakihegy
Website: www.nilfisk.hu
INDIA
SALES COMPANIES
AUSTRALIA
Nilfisk-Advance
48 Egerton St.
P.O. Box 6046
Silverwater, N.S.W. 2128
Website: www.nilfisk.com.au
AUSTRIA
Nilfisk-Advance GmbH
Metzgerstrasse 68
5101 Bergheim bei Salzburg
Website: www.nilfisk.at
BELGIUM
Nilfisk-Advance n.v-s.a.
Riverside Business Park
Boulevard Internationalelaan 55
Bâtiment C3/C4 Gebouw
Bruxelles 1070
Website: www.nilfisk.com
CHILE
Nilfisk-Advance de Chile
San Alfonso 1462
Santiago
Website: www.nilfisk.com
CHINA
Nilfisk-Advance (Suzhou)
Building 18, Suchun Industrial Estate
Suzhou Industrial Park
215021 Suzhou
Website: www.nilfisk-cs.com
CZECH REPUBLIC
Nilfisk-Advance
VGP Park Horní Počernice
Do Čertous 1/2658
193 00 Praha 9
Website: www.nilfisk.com
DENMARK
Nilfisk-Advance NORDIC A/S
Sognevej 25
2605 Brøndby
Tel.: (+45) 4323 4050
E-mail: kundeservice.dk@nilfisk.com
FINLAND
Nilfisk-Advance Oy Ab
Koskelontie 23 E
02920 Espoo
Website: www.nilfisk.fi
FRANCE
Nilfisk-Advance
26 Avenue de la Baltique
Villebon sur Yvette
91978 Courtabouef Cedex
Website: www.nilfisk.fr
GERMANY
Nilfisk-ALTO
eine Marke der Nilfisk-Advance GmbH
Guido-Oberdorfer-Straße 2-10
89287 Bellenberg
Website: www.nilfisk.de
GREECE
Nilfisk-Advance A.E.
Αναπαύσεως 29
Κορωπί Τ.Κ. 194 00
Website: www.nilfisk.gr
HOLLAND
Nilfisk-Advance
Versterkerstraat 5
1322 AN Almere
Website: www.nilfisk.nl
Nilfisk-Advance India Limited
Pramukh Plaza, ‘B’ Wing, 4th floor, Unit No. 403
Cardinal Gracious Road, Chakala
Andheri (East) Mumbai 400 099
Website: www.nilfisk.com
IRELAND
SOUTH KOREA
Nilfisk-Advance Korea
3F Duksoo B/D, 317-15
Sungsoo-Dong 2Ga, Sungdong-Gu
Seoul
Website: www.nilfisk.com
SPAIN
Nilfisk-Advance S.A.
Torre d’Ara, Planta 9
08302 Mataró
Barcelona
Website: www.nilfisk.es
Nilfisk-Advance
1 Stokes Place
St. Stephen’s Green
Dublin 2
Website: www.nilfisk.com
SWEDEN
ITALY
SWITZERLAND
Nilfisk-Advance SpA
Strada Comunale della Braglia, 18
26862 Guardamiglio (LO)
Website: www.nilfisk.it
JAPAN
Nilfisk-Advance Inc.
1-6-6 Kita-shinyokohama, Kouhoku-ku
Yokohama, 223-0059
Website: www.nilfisk.com
MALAYSIA
Nilfisk-Advance Sdn Bhd
Sd 14, Jalan KIP 11
Taman Perindustrian KIP
Sri Damansara
52200 Kuala Lumpur
Website: www.nilfisk.com
MEXICO
Nilfisk-Advance de Mexico, S. de R.L. de C.V.
Agustín M. Chavez No. 1, PB oficina 004
Col. Centro de Ciudad Santa Fe
01210 Mexico, D.F.
Website: www.nilfisk.com
NEW ZEALAND
Nilfisk-Advance
Danish House
6 Rockridge Avenue
Penrose, Auckland 1135
Website: www.nilfisk.com
NORWAY
Nilfisk-Advance AS
Bjørnerudveien 24
1266 Oslo
Tel.: (+47) 22 75 17 70
E-mail: info.no@nilfisk.com
POLAND
Nilfisk-Advance Sp. Z.O.O.
ul. 3 Maja 8
05-800 Pruszków
Website: www.nilfisk.pl
PORTUGAL
Nilfisk-Advance
Sintra Business Park
Zona Industrial Da Abrunheira
Edificio 1, 1° A
P2710-089 Sintra
Website: www.nilfisk.pt
RUSSIA
Нилфиск-Эдванс
127015 Москва
Вятская ул. 27, стр. 7
Россия
Website: www.nilfisk.ru
SOUTH AFRICA
WAP South Africa
12 Newton Street
Spartan 1630
Website: www.nilfisk.com
Nilfisk-Advance AB
Taljegårdsgatan 4
431 53 Mölndal
Website: www.nilfisk-alto.se
Nilfisk-Advance
Ringstrasse 19
Kircheberg/Industri Stelzl
9500 Wil
Website: www.nilfisk-alto.ch
TAIWAN
Nilfisk-Advance Taiwan Branch
1F, No. 193, sec. 2, Xing Long Rd.
Taipei
Tel.: (+88) 6227 002 268
Website: www.nilfisk-alto.tw
THAILAND
Nilfisk-Advance Co. Ltd.
89 Soi Chokechai-Ruammitr
Viphavadee-Rangsit Road
Ladyao, Jatuchak, Bangkok 10900
Website: www.nilfisk-thailand.com
TURKEY
Nilfisk-Advance A.S.
Serifali Mh. Bayraktar Bulv. Sehit Sk. No:7
Ümraniye
Istanbul
Website: www.nilfisk.com
UNITED KINGDOM
Nilfisk (A Division of Nilfisk-Advance Ltd.)
Bowerbank Way
Gilwilly Industrial Estate, Penrith
Cumbria CA11 9BQ
Tel: 01768 868995
Website: www.nilfisk.co.uk
UNITED ARAB EMIRATES
Nilfisk-Advance Middle East Branch
SAIF-Zone
P.O. Box 122298
Sharjah
Website: www.nilfisk.com
VIETNAM
Nilfisk-Advance Representative Office
No. 51 Doc Ngu Str.
Ba Dinh Dist.
Hanoi
Website: www.nilfisk.com
Download PDF
Similar pages