sterishred® 500 series

THE GREEN SOLUTION FOR DISPOSING MEDICAL WASTE
STERISHRED®
500 SERIES
STERISHRED® 500
INTEGRATED SHREDDERSTERILIZER FOR HEALTHCARE
WASTE
STERISHRED® 500 is an advanced
solution to perform a safe
biomedical treatment which reduces
risks, volume and weights (to a
certain extent) and disposal cost.
It carries out automated actions to
sterilize infectious hospital waste
incl. a pretreatment (multiple
vacuum, conditioning, shredding)
and a post treatment cycle (drying)!
TESALYS
Sterishred Division
Main Adress
7, rue du Cassé
31240 Saint-Jean (Toulouse)
France
Tel. +33 5 62 10 18 91
sterishred@tesalys.fr
www.sterishred.com
STERISHRED® 500
SAFE FOR THE ENVIRONMENT
TECHNICAL DETAILS,
• Treatment with saturated steam as preferred method by WHO
• Low cost per kg (0,08 Euro/kg) - ask for the calculation program
• Low maintenance cost (no inflatable seals etc.)
• Small footprint
• Immediate destruction of infectious waste (unrecognizable)
• Emission- and chemical-free sterilization(!) with steam alone
• Short cycle times (approx. < 50 mins.)
• Load capacity approx. 50 kgs per cycle (approx. 500 l) with a 36 kW steam
generator, 100 kgs (approx. 1000 l) with a 48 kW steam generator with double loading
• Volume reduction up to 80 % on bulky materials
• Destructing sharps and thin walled materials up to 1,5 mm
• Load/weight control as standard
• Machine is fully sterilized after every cycle incl. the shredder
• Large touch-screen with real-time display
• All automatic (loading and unloading)
• Separates liquids from solids and sterilizes both in a single process
• Special program for liquids (blood bags, urine etc.)
• High torque shredder (520 x 680 mm)
• Fits in every room with approx. 24 m² and a height of about 3,35 m
• Patent pending for special loading device
• Programmable cleaning cycles are built in the unit
• Microbiological inactivation by an Overkill Treatment (as recommended by the Robert-Koch-Institute, Berlin), with several pre-vacuums
• Another option is a second additional shredder for treating sharps only to achieve a final
needle size of < 10 mm
Capacity : 500 l / 1000 l cycle (approx. 50 kgs / 100 kgs per cycle if 1000 l < = 100 kgs)
Autoclave chamber dimensions : Approx. 295 l
Total cycle time : Approx. 50 mins (dep. on water content)
Steam generator : 500 l = 36 kW / 1000 = 48 kW approx.
Shredder: 12 kW with 3 or 6 teeth per knive, made from Hardox material
Usable shredder size: 520 x 680 mm, Shredder knives 190 mm dia.
Entry/exit doors: All automatic
Automatic weighing system: With overload stop as standard
Automatic loading system: With universal clamping system, usually 240 l wheelie bins are
preferred
Automatic discharging system: Special system for emptying in 1100 l wheelie bins
Automatic cleaning cycle: Freely programmable
Leak test: Integrated in each cycle
Pusher : Pneumatic
Integrated printer: Showing all data such as temperature, pressure, time and other
cycle details, USB port to collect data
Water softener: Available as option, a 300 l water tank is already built in 1 for solid materials, 1 for liquids only (approx. 250 l/h capacity), 1 special all purpose, 1 for emergency
purposes in case of shredder failure or other issue
Condenser: With built in heat recovering
Electronic: Siemens with a 10» touch screen monitor, with a predictive maintenance program, with internet connection to the factory to monitor the machine in case of technical
issues
Frame : Steel with black powder coating
External steam source connections : Available as option
Piping: All stainless steel
Steam/air/water condensation : Via 0,2 micron filter before venting
Steam: By built-in generator of 36 / alternatively 48 kW or from the hospital steam source
Tropical version : Available on request with air conditioned control cabinet and humidity
proof motors (option)
Utilities: Softened water 4 - 8 dH, min. flow 10 l / min, min. pressure 5-6 bar, automaticially
reduced to min. 4,5 bar
Electricity : 400 V - 50 Hz (36 or 48 kWh) as standard, other than that available as option built in printer, print time, all self-reset sequences, pressure, temperature, date etc.
Microbiological inactivation : SAL -log48, -8 log10
Plateau phase : 10/ alternatively 20 mins, 134°C - 138°C and 3,5 - 3,8 bar pressure Sterilization process only by steam, no chemicals used and needed
Sizes : Machine dimensions approx. W 2200 mm x D 1200 mm x H 3350 mm incl. wheelie bin
Weight net : Approx. 2250 kgs (without options)
All necessary certificates and homologations :
• ISO 9001-2008
• CE includes DIN EN ISO TR 14121-1
• ISO DIN EN TS 17665(13)
• DIN EN 285 and EN 556-1
• DIN EN ISO 11138-3
• TÜV certificates for the vessel
A COMPLETE RANGE
STERISHRED® 50
STERISHRED® 250
STERISHRED® 500 SERIES
TESABAG
TESABOX
10 kg/h
40 kg/h
50-100 kg/h
« biohazard »
autoclavable bags
cardboard containers
for biohazardous waste
Design : digeek.fr — Illustrations : © Clément Debeir / Agence SapienSapienS, © Christian Rivière, © Fotolia — Ref. T07-001-EN — Imp. 11/2016 Technical
information and pictures in this brochure are not contractual and can be modified without prior notice.
Heavy duty on-site solution to convert medical infectious waste into
sterilized black bag waste (municipal waste) in minutes !
Download PDF
Similar pages