Operating instructions
Read the operating instructions before switching on for the first time
Page 6
7083 597-01
Disposal notes
The appliance contains reusable materials and should
be disposed of properly - not simply with unsorted
household refuse. Appliances which are no longer
needed must be disposed of in a professional and
appropriate way, in accordance with the current local
regulations and laws.
When disposing of the appliance, ensure that the refrigerant circuit
is not damaged to prevent uncontrolled escape of the refrigerant
it contains (data on type plate) and oil.
• Disable the appliance.
• Pull out the mains plug.
• Cut through the connection cable.
Danger of suffocation due to packing material
and plastic film!
Do not allow children to play with packaging
Take the packaging material to an official collection point.
Range of appliance use
The appliance is suitable solely for cooling food
in a domestic environment or similar.
This includes, for example, use
- in staff kitchenettes, bed and breakfast establishments,
-by guests in cottages, hotels, motels and other
forms of accommodation,
-in catering and similar services in the wholesale
Use the appliance solely as is customary within a domestic environment. All other types of use are inadmissible.
The appliance is not suitable for storing and cooling medicines,
blood plasma, laboratory preparations or similar substances and
products covered by the 2007/47/EC Medical Devices Directive.
Any misuse of the appliance may result in damage to or spoilage
of stored goods.
Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres.
Description of the appliance
Interior light
(LED light strip)
Interior light switch
Type plate
Brightness control for interior light
Grid shelves
Temperature control
Connect the mains cable provided
to the appliance.
Adjustable-height feet
Safety instructions and warnings
•To prevent injury or damage to the unit, the
appliance should be unpacked and set up by
two people.
•In the event that the appliance is damaged on
delivery, contact the supplier immediately before
connecting to the mains.
•To guarantee safe operation, ensure that the
appliance is set up and connected as described
in these operating instructions.
•Disconnect the appliance from the mains if any
fault occurs. Pull out the plug, switch off or remove
the fuse.
•When disconnecting the appliance, pull on the
plug, not on the cable.
•Any repairs and work on the appliance should
only be carried out by the customer service
department, as unauthorised work could prove
highly dangerous for the user. The same applies
to changing the mains power cable.
•Do not allow naked flames or ignition sources
to enter the appliance. When transporting and
cleaning the appliance, ensure that the refrigerant
circuit is not damaged. In the event of damage,
make sure that there are no ignition sources
nearby and keep the room well ventilated.
•Do not stand on the plinth, drawers or doors or
use them to support anything else.
•This appliance can be used by children of 8 years
old and over, and also by persons with restricted
physical, sensory or mental capacity or lack of
experience and knowledge, if they are supervised
or have been instructed on safe use of the appliance and understand the resulting risks. Children
must not be allowed to play with the appliance.
Cleaning and user maintenance must not be
carried out by children without supervision.
•Avoid prolonged skin contact with cold surfaces
or chilled/frozen food. This could cause pain,
numbness and frostbite. In the case of prolonged
skin contact, protective measures should be
taken, e.g. gloves should be worn.
•Do not store explosives or sprays using
combustible propellants such as butane,
propane, pentane, etc. in the appliance. Electrical
components might cause leaking gas to ignite.
You may identify such sprays by the printed
contents or a flame symbol.
•Do not use electrical appliances inside the
•If you have a lockable appliance, do not keep the
key near the appliance or within reach of children.
•The appliance is designed for use in enclosed
areas. Do not operate the appliance outdoors or
in areas where it is exposed to splash water or
damp conditions.
•The LED light strip illuminates the interior of the
appliance. It is not suitable for lighting a room.
•When transporting or operating the appliance at
an altitude of more than 1500 m above sea level,
the glass pane in the door can break due to the
reduction in air pressure. Broken fragments are
sharp-edged and can cause serious injury.
Climate rating
The climate rating indicates the room
temperature at which the appliance may
be operated in order to achieve full refrigeration performance.
The climate rating is indicated on the
type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Climate rating
Room temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
+10°C to +38°C
+10°C to +43°C
Do not operate the appliance outside the
specified room temperature range.
•Do not consume food which has been stored for
too long, as it could cause food poisoning.
Setting up
• Avoid positioning the appliance in direct sunlight or near cookers, radiators and similar sources of heat.
• The floor on which the appliance stands should be horizontal
and level. Compensate for uneven floors with the adjustable
• Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m3 per 8 g of R 600a
refrigerant used in the appliance, so as to avoid the formation of
inflammable gas/air mixtures in the room where the appliance
is located in the event of a leak in the refrigerant circuit. The
quantity of refrigerant used in your appliance is indicated on
the type plate on the inside of the appliance.
• There must be a gap of at least 20 cm between the upper edge
of the appliance and the ceiling. Always ensure that there is good
ventilation and that the outward flowing air is able to escape.
Do not cover ventilation
openings or grille.
Electrical connection
Only operate the appliance with alternating current (AC).
The permissible voltage and frequency are indicated on the type
plate. The position of the type plate is shown in the section entitled
Description of the appliance.
The socket must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the appliance and must
be easily accessible.
Do not connect the appliance using an extension cable or extension socket.
Do not use stand-alone inverters (conversion
of direct current to alternating/three-phase
current) or energy-saving plugs. Risk of damage to the electronic control system!
Switching the appliance on and off
You are recommended to clean the interior of the appliance before
switching it on for the first time (see Cleaning).
Switching the appliance on
Connect the appliance to the mains - the appliance is switched on.
Once the mains plug has been inserted, the refrigeration
unit may not come on until up to 8 minutes later. This is
required to protect the electronic controls.
Switching the appliance off
Inserting the grid shelves
The knurled screws supplied are used
to support the grid shelves.
Screw the knurled screws into
the desired position inside the
appliance to the left and right
and insert the grid shelves.
The lower grid shelf only
requires two screws at the
front. The rear part of this grid
shelf rests on the ledge of the
interior container.
Pull out the mains plug or set the temperature control
to 0.
When the temperature control is turned to "0", the refrigeration system is switched off, but the appliance is not
completely disconnected from the mains. Before cleaning,
always disconnect the appliance from the mains. Remove
the plug.
Setting the temperature
Set the temperature inside the appliance using the temperature
When the control is turned to
"7", the temperature inside the
appliance is at its lowest.
Set the control between "1" and
"7" as required.
Wall mounting
The appliance can be wall-mounted.
There are two mounting holes
at the top of the back of the
Make sure the wall and the
fasteners can withstand the
weight of the appliance when
fully loaded.
Interior light
The interior of the appliance is
lit by an LED light strip at the top
of the interior container.
Switch on switch S, the interior
light comes on.
The light intensity of the LED
light corresponds to laser
class 1/1M.
The light cover may only be
removed by customer service staff. If the cover is removed, do not look directly
at the light through optical
lenses from close distance.
This can damage your eyes.
Brightness control for
interior light
The brightness of the light
inside the appliance can also
be adjusted.
Adjust the brightness of the
light by turning the control
Safety lock
The lock in the appliance door is
equipped with a safety mechanism.
Locking the appliance:
• Insert the key as shown by arrow
• Turn the key 90°.
To unlock the appliance, the same
procedure must be repeated in the
same order.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it off and disconnect the plug or switch off or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
Before cleaning always switch off the appliance. Disconnect
from the mains or switch off or unscrew the fuse.
• Clean the side panels and door surfaces with a clean and soft
cloth only. If necessary, use a moist cloth (water + detergent).
Alternatively, use a microfibre cloth.
- Do not use abrasive sponges or scourers, do not use concentrated cleaning agents and never use cleaning agents containing sand, chloride or acid or chemical solvents, as these would
damage the surfaces and could cause corrosion.
• Clean the inside and equipment with lukewarm water and a little
Do not use steam cleaners
because of the risk of injury and damage.
• Ensure that no cleaning water penetrates into the electrical
components or ventilation grille.
• Dry all parts well with a cloth.
• Do not damage or remove the type plate on the inside of the
appliance. It is very important for servicing purposes.
You may be able to rectify the following faults by checking
the possible causes yourself
• Appliance does not function:
–Is the appliance switched on?
–Is the plug correctly fitted in the mains socket?
–Is the fuse intact?
• Loud running noise:
–Is the appliance set up firmly on the floor?
–Does the appliance cause nearby items of furniture or objects
to vibrate? Please note that noises caused by the refrigerant
circuit cannot be avoided.
• The temperature is not low enough:
–Is the temperature setting correct (see "Setting the temperature")?
– Does the separately installed thermometer show the correct
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes
apply and you cannot rectify
the fault yourself, contact the
nearest customer service department stating the type designation 1, service number 2
and appliance number 3 as
indicated on the type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
The appliance complies with the relevant safety regulations and
EU Directives 2014/30/EU and 2014/35/EU.
Download PDF
Similar pages