January 2016 I Errors and technical alterations reserved.
ACCESSORIES FOR
SPRAY GUNS &
CAR REFINISH
1
BROCHURE
PRE ATOMIZATION TECHNOLOGY
STANDARD
SPLIT NOZZLE
0,05 bar
2
0,1 bar
0,2 bar
January 2016 I Errors and technical alterations reserved.
0,3 bar
SPRAY GUN MATRIX
PREMIUM Quality
Gravity
Gold
Pressure
HIGH Quality
Silver
STANDARD Quality
Bronze
Gravity
Pressure
Gravity
page 17
page 11
page 17
page 5
WS-400 EVO CLEAR
W-200 WBS1/WB1
W-400 WBX/BellAria
page 6
page 17
page 7
LS-400 ENTECH
W-200 WBS1/WB1
page 8
page 17
Clearcoat
page 4
Pressure
W-200 G2P/LV2
AZ3 HTE2
Basecoat
page 17
W-400 WB2/BallAria
W-200 G2P/LV2
page 9
Primer
page 17
3
LPH-300
W-200 WBS1/WB1
W-200 G2P/LV2
Impact AZ3 HTE-S
page 10
Spray Putty
page 10
AZ3 HTE2 HVLP
Concept AZ3 HTE P.A.S.
Spot Repair
page 13
LPH-80
AZ40
Custom Painting
W-300 WB
page 16
RG-3L
page 16
AZ5
January 2016 I Errors and technical alterations reserved.
page 12
Smart Repair
page 12
CLEARCOAT
WS-400 evo clear
PREMIUM
Quality
Gold
FEATURES
• Perfect surfaces by Split Nozzle Technology
• High material transfer by a large and uniform spray pattern
• Very fine atomization
• VOC-compliant professional spray gun, significantly more than 65% efficiency
• Clearly visible reduction of so-called fat edges
• Characteristically for ANEST IWATA: quiet and pleasant background noise
• Lightweight and anatomical spray gun body
• Simple operation of the control knobs, for right and left handers
• Conical seal nozzle, minimum wear parts
• Clearer design, easy maintenance
• Quality surface for an easy cleaning
• Compatible with the 3M PPS cup system (Adapter Type 43)
Technical
Data
1.3 HD
WS-400 -1401HD EVO
1.4 HD
WS-400 -1501HD EVO
1.5 HD
260
160
2.0
220
240
356
260
265
270
275
365
200 mm
WS-400 -1301HD EVO
130 mm
1.2 HD*
WS-400-01
WS-400 -1201HD EVO*
365
370
4
ORDER INFORMATION
with PC-G600P-2
cup 600ml
WS-400 evo clear
PRO KIT with aircap, nozzle/needle
ø 1,2 HD*
ø 1,3 HD
ø 1,4 HD
ø 1,5 HD
13244111P
13244122EP
13244124EP
13244126EP
93505880
93506910
AIRCAP single
NOZZLE + NEEDLE single
93505300
93506920
93506930
*1.2 HD only for special clearcoats
Split nozzle
January 2016 I Errors and technical alterations reserved.
PRE ATOMIZATION TECHNOLOGY
Standard
Supernova Series
CLEARCOAT
W-400 WBX classic plus
HIGH
Quality
Silver
FEATURES
• Perfect surfaces by Split Nozzle Technology at its best
• VOC-compliant professional spray gun, significantly more than 65% transfer efficiency
• Very fine atomization
• Clearly visible reduction of fat edges
• Characteristically for ANEST IWATA: quiet and pleasant background noise
• With 380g one of the most lightweight guns on the market
• Conical seal nozzle, minimum wear parts
• Quality surface for an easy cleaning
• Clearer design, easy maintenance
• Compatible with the 3M PPS cup system (Adapter Type 2)
Technical
Data
W-400 WBX-134G
1.3
W-400 WBX-144G
1.4
W-400 WBX-164G
1.6
195
WBX
2.0
200
370
390
230
ORDER INFORMATION
W-400 WBX
PRO KIT with aircap, nozzle/needle
ø 1,3
ø 1,4
ø 1,6
13241423P
13241424P
13241426P
AIRCAP single
5
93622630
93634610
NOZZLE + NEEDLE single
with PCG-6-PE
cup 600ml
93628610
93622620
Split nozzle
PRE ATOMIZATION TECHNOLOGY
HIGH
Quality
W-400 BellAria classic plus
Silver
FEATURES
• High Quality spray gun for fast efficient coating
• Perfect surfaces by new air cap: technology Flat & Thin™
• Only 270 l/min air consumption, giving the sprayer an excellent control of the fluid build
• Stable, large and compact pattern shape
Technical
Data
W-400 -134G
1.3
220
280
W-400 -144G
1.4
250
300
W-400 -164G
1.6
W-400 -184G
1.8
360
375
W-400 -204G
2.0
375
390
2.0
285
270
330
ORDER INFORMATION
W-400 BellAria
PRO KIT with aircap, nozzle/needle
ø 1,3
ø 1,4
ø 1,6
13328513P
13328514P
13328516P
AIRCAP single
NOZZLE + NEEDLE single
W-400 BellAria
with PCG-6-PE
cup 600ml
PRO KIT with aircap, nozzle/needle
AIRCAP single
NOZZLE + NEEDLE single
93611710
93611740
93611750
ø 1,8
ø 2,0
13328518P
13328519P
93611710
93611770
93611780
93611760
January 2016 I Errors and technical alterations reserved.
BA4-2
BASECOAT
LS-400 entech
PREMIUM
Quality
FEATURES
Gold
• Perfect surfaces and finest atomization by Split Nozzle Technology
• Soft spray pattern for easy handling when blending
• High material transfer, maximum material savings
• Large and uniform spray pattern
• Consistent droplet size
• VOC-compliant professional spray gun, significantly more than 65% efficiency
• Characteristically for ANEST IWATA: quiet and pleasant background noise
• Lightweight and anatomical spray gun body
• Simple operation of the control knobs, for right and left handers
• Conical seal nozzle, minimum wear parts
• Clearer design, easy maintenance
• Quality surface for an easy cleaning
• Compatible with the 3M PPS cup system (Adapter Type 43)
Technical
Data
6
1.3 ETS
LS-400-ETS14
1.4 ETS
LS-400-ETS15
1.5 ETS
160
1.8
160
420
180
190
250
350
250
350
235
310
300 mm
1.3 ET
LS-400-ETS13
130 mm
LS-400-1305
400
200 mm
150
1.2 ET
LS-400-05
LS-400-1205
400
235
310
410
240
320
425
ORDER INFORMATION
with PC-G600P-2
cup 600ml
LS-400 entech
ø 1,2 ET
ø 1,3 ET
ø 1,3 ETS
ø 1,4 ETS
ø 1,5 ETS
PRO KIT with aircap, nozzle/needle
13186521P
13186533P
13186534P
13186545P
13186552P
93512140
93512160
93512780
93513120
93513140
AIRCAP single
NOZZLE + NEEDLE single
93512100
Ask for proper nozzle setups your distributor or the paint factory.
Split nozzle
PRE ATOMIZATION TECHNOLOGY
WS-400 evo base
FEATURES
• Finest atomization by Split Nozzle Technology; Soft spray pattern for easy handling when blending
• High material transfer, maximum material savings; Large and uniform spray pattern
1.3 HD
WS-400 -1401HD EVO
1.4 HD
160
2.0
220
240
370
260
265
270
200 mm
1.3 OBS
WS-400 -1301HD EVO
130 mm
WS-400 -1301OBS EVO
WS-400-01
January 2016 I Errors and technical alterations reserved.
Technical
Data
365
370
• HD ( High Delivery) • OBS (Optimised Basecoat Setting)
ORDER INFORMATION
WS-400 evo base
ø 1,3 OBS
ø 1,3 HD
ø 1,4 HD
PRO KIT with aircap, nozzle/needle
13244118EP
13244121EP
13244123EP
93506850
93506910
AIRCAP single
NOZZLE + NEEDLE single
with PC-G600P-2
cup 600ml
93505300
93506920
Ask for proper nozzle setups your distributor or the paint factory.
BASECOAT
W-400 WB2 classic plus
HIGH
Quality
Silver
FEATURES
• Perfect surfaces by Split Nozzle Technology at its best
• VOC-compliant professional spray gun, significantly more than 65% transfer efficiency
• Very fine atomization, Ideal for blending
• Characteristically for ANEST IWATA: quiet and pleasant background noise
• With 380g one of the most lightweight guns on the market
• Conical seal nozzle, minimum wear parts
• Quality surface for an easy cleaning
• Clearer design, easy maintenance
• Compatible with the 3M PPS cup system (Adapter Type 2)
Technical
Data
W-400 WB-122G
1.2
W-400 WB-132G
1.3
W-400 WB-142G
1.4
W-400 WB-162G
1.6
290
WB2
160
1.8
300
390
310
250
340
ORDER INFORMATION
W-400 WB2
PRO KIT with aircap, nozzle/needle
ø 1,2
ø 1,3
ø 1,4
ø 1,6
13241415P
13241416P
13241417P
13241418P
AIRCAP single
93624620
NOZZLE + NEEDLE single
with PCG-6-PE
cup 600ml
93627610
93634610
93628610
7
93622620
Split nozzle
PRE ATOMIZATION TECHNOLOGY
HIGH
Quality
W-400 BellAria classic plus
Silver
FEATURES
• High Quality spray gun for fast efficient coating
• Perfect surfaces by new air cap: technology Flat & Thin™
• Only 270 l/min air consumption, giving the sprayer an excellent control of the fluid build
• Stable, large and compact pattern shape
Technical
Data
W-400 -134G
1.3
220
280
W-400 -144G
1.4
250
300
W-400 -164G
1.6
W-400 -184G
1.8
360
375
W-400 -204G
2.0
375
390
2.0
285
270
330
ORDER INFORMATION
W-400 BellAria
PRO KIT with aircap, nozzle/needle
ø 1,3
ø 1,4
ø 1,6
13328513P
13328514P
13328516P
AIRCAP single
NOZZLE + NEEDLE single
W-400 BellAria
with PCG-6-PE
cup 600ml
PRO KIT with aircap, nozzle/needle
AIRCAP single
NOZZLE + NEEDLE single
93611710
93611740
93611750
ø 1,8
ø 2,0
13328518P
13328519P
93611710
93611770
93611780
93611760
January 2016 I Errors and technical alterations reserved.
BA4-2
PRIMER
LPH-300
PREMIUM
Quality
Gold
FEATURES
• High material savings because of LVLP technology with split nozzle
• Noticeably low overspray formation
• Extremely low air supply pressure, only 1.0 bar - 1.5 bar
• Very low air consumption, only 200Nl/min
• Pleasant lightweight handling
• Due to finer atomization topcoat level suitable for wet on wet (1.4/1.6 mm)
• Characteristically for ANEST IWATA: quiet and pleasant background noise
• Simple operation of the control knobs, for right and left handers
• Conical seal nozzle, minimum wear parts
• Quality surface for an easy cleaning
• Clearer design, easy maintenance
• Compatible with the 3M PPS cup system (Adapter Type 6)
Technical
Data
LPH-300 -144LV
1.4
LPH-300 -164LV
1.6
LPH-300 -184LV
1.8
LV4
1.0
90
200
250
110
ORDER INFORMATION
8
LPH-300
with PC-G600P-2
cup 600ml
opt. PCG 2P-2
PRO KIT with aircap, nozzle/needle
ø 1,4
ø 1,6
ø 1,8
13189043P
13189023P
13189033P
AIRCAP single
93875602
93862600
NOZZLE + NEEDLE single
93869600
93871600
cup 200ml
Split nozzle
PRE ATOMIZATION TECHNOLOGY
LVLP
January 2016 I Errors and technical alterations reserved.
Low Volume Low Pressure
TECHNOLOGY
further development of HVLP Technology
3M PPS Type 6
PRIMER
impact AZ3 HTE-S black
STANDARD
Quality
Bronze
FEATURES
• Robust filler spray gun
• Flat&thin spray pattern with a fine atomization
• All wetted parts in stainless steel
• Trigger easy to dose
• Simple operation of the control knobs, for right and left handers
• Costs for replacement of spare parts extremely customer friendly
• Compatible with the 3M PPS cup system (Adapter Type 43)
Technical
Data
1.4
HTE-S1
1.6
AZ3 HTE-S IMPACT
1.8
HTE-S2
290
375
300
2.5
335
2.0
362
375
230
250
270
ORDER INFORMATION
impact AZ3 HTE-S
ø 1,4
ø 1,6
ø 1,8
ø 2,0
GUN with aircap, nozzle/needle
W0SPG90AG14C
W0SPG90AG16C
W0SPG90AG18C
W0SPG90AG20C
AIRCAP single
W2CAP90AG12
NOZZLE + NEEDLE single
W2ADU90AG14
9
W2CAP90AG16
W2ADU90AG16
W2ADU90AG18
W2ADU90AG20
with PCG-6P-2-AZ
cup 600ml
HTE-S
High Performance Spray
TECHNOLOGY
3M PPS Type 43
January 2016 I Errors and technical alterations reserved.
Homogeneus and fine atomization
SPRAY PUTTY
AZ3 HTE2 HVLP
STANDARD
Quality
Bronze
FEATURES
• Robust work spray gun for materials with high viscosity
• Trigger easy to dose
• Simple operation of the control knobs, for right and left handers
• Costs for replacement of spare parts extremely customer friendly
• Compatible with the 3M PPS cup system (Adapter Type 43)
Technical
Data
AZ3 HTE2 HVLP
2.0
HVLP
2.0
240
340
360
ORDER INFORMATION
AZ3 HTE2 HVLP
ø 2,0
GUN HVLP with aircap, nozzle/needle
W0SPG85AG20C
AIRCAP single
W2CAP84AG
W2013031300
NOZZLE + NEEDLE single
3M PPS Type 43
10
with PCG-6P-2B-AZ
cup 600ml
STANDARD
Quality
concept AZ3 HTE P.A.S.
Bronze
FEATURES
• Robust work spray gun with flow pressure
• Large, uniform spray pattern for materials with high viscosity due to Pressure Assisted System
(P.A.S.)
• Amazingly high material discharge with high-viscous materials due to direct pressurization
• Costs for replacement of spare parts extremely customer friendly
• High material transfer rate
• All wetted parts in stainless steel
• Precise mini controller for cup flow pressure
• Trigger easy to dose
Technical
Data
January 2016 I Errors and technical alterations reserved.
AZ3 HTE P.A.S. CONCEPT
1.3
1.5
P1 CONCEPT
190
2.5
260
286
270
320
ORDER INFORMATION
concept AZ3 HTE P.A.S.
GUN with aircap, nozzle/needle
AIRCAP single
NOZZLE + NEEDLE single
with PCGP-6P-2B-AZ
pressure cup 600ml
ø 1,3
ø 1,5
W0SPG88AG13C
W0SPG88AG15C
W2CAP83AG13
W2ADU83AG13
W2ADU83AG15
UNIVERSAL
W-400 classic plus
HIGH
Quality
FEATURES
Silver
• universal spray gun for industrial coating
• VOC-compliant professional spray gun, significantly more than 65% transfer efficiency
• large and uniformly shaped wet core, even with high viscosity materials
• clearly noticeable reduction in banding
Technical
Data
W-400-062G
0.8
60
80
W-400-102G
W-400-122G
1.0
95
150
1.2
100
W-400-132G
1.3
W-400-142G
1.4
W-400-162G
1.6
W-400-182G
1.8
W-400-202G
2.0
R2
W-400-251G
2.5
W1
LV2
2.0
175
280
160
225
210
240
LV1
270
320
290
460
3.0
260
320
360
360
340
ORDER INFORMATION
W-400
PRO KIT with aircap, nozzle/needle
ø 0,8
ø 1,0
ø 1,2
ø 1,3
ø 1,4
13241401P
13241402P
13241403P
13241404P
13241405P
93889610
93890610
93881610
93831610
AIRCAP single
with PCG-6-PE
cup 600ml
STANDARD
11
93830610B
NOZZLE + NEEDLE single
W-400
93823610
ø 1,6
ø 1,8
ø 2,0
ø 2,5
PRO KIT with aircap, nozzle/needle
13241406P
13241407P
13241408P
13241409P
AIRCAP single
93830610B
93859611
93814610B
93813610B
NOZZLE + NEEDLE single
93832610
93821610
93820610
93819610
Quality
AZ3 HTE2
Bronze
FEATURES
• Robust work spray gun universal for all materials
• Simple operation of the control knobs, for right and left handers
• Compatible with the 3M PPS cup system (Adapter Type 43)
Technical
Data
80
10-15HTE
2.0
1.5
1.8
AZ3 HTE2
2.0
2.5
2.8
3.0
3.5
18-20HTE
240
160
260
250
300
215
300
25HTE
28-30HTE
180
200
140
450
340
280
360
540
3.0
380
300
560
35HTE
400
600
420
ORDER INFORMATION
AZ3 HTE2
GUN
with aircap, nozzle/needle
ø 1,0
ø 1,3
ø 1,5
ø 1,8
ø 2,0
W0SPG81AG10C
W0SPG81AG13C
W0SPG81AG15C
W0SPG81AG18C
W0SPG81AG20C
W2010133700
W2010133800
AIRCAP single
with PCG-6P-2B-AZ
cup 600ml
NOZZLE + NEEDLE single
W2CAP80AG15
W2010133500
AZ3 HTE2
GUN with aircap, nozzle/needle
3M PPS Type 43
W2010133600
W2CAP80AG18
W2010133900
ø 2,5
ø 2,8
ø 3,0
ø 3,5
W0SPG81AG25C
W0SPG81AG28C
W0SPG81AG30C
W0SPG81AG35C
AIRCAP single
W2CAP80AG25
NOZZLE + NEEDLE single
W2010134000
W2CAP80AG30
W2010134300
W2010134100
W2CAP80AG35
W2010134200
January 2016 I Errors and technical alterations reserved.
1.0
1.3
SMART REPAIR
W-300 WB
PREMIUM
Quality
FEATURES
Gold
• Perfect surfaces by Split Nozzle Technology
• Specifically for blending, for example, side wall or bumper and smaller areas
• Barely visible transitions due to soft and fine spray
• Very fine atomization with low air consumption (190l/min)
• Extremely low material consumption
• Characteristically for ANEST IWATA: quiet and pleasant background noise
• With 320g one of the most lightweight Smart Repair guns on the market
• Simple operation of the control knobs, for right and left handers
• Conical seal nozzle, minimum wear parts
• Clearer design, easy maintenance
• Quality surface for an easy cleaning
• Compatible with the 3M PPS cup system (Adapter Type 6)
Technical
Data
12
W300 WB-101G
1.0
W300 WB-121G
1.2
W300 WB-141G
1.4
65
WB1
1.5
230
100
240
190
125
250
ORDER INFORMATION
W-300 WB
with PCG 2P-2
cup 200ml
PRO KIT with aircap, nozzle/needle
opt. PC-G600P-2
ø 1,0
ø 1,2
ø 1,4
13241515P
13241525P
13241505P
93602620
93591620
AIRCAP single
cup 600ml
93592621
NOZZLE + NEEDLE single
93595620
3M PPS Type 6
STANDARD
Quality
AZ40
Bronze
FEATURES
• Robust hobby spray gun for smaller areas
• Very low air requirement, only 130 to 170l/min
• Universal using
• Simple operation of the control knobs, for right and left handers
• Compatible with the 3M PPS cup system (Adapter Type 43)
Technical
Data
January 2016 I Errors and technical alterations reserved.
AZ40
0.8
8
60
1.0
10
90
1.2
12
120
1.5
15
1.8
18
210
2.0
20
230
2.5
170
100
130
110
130
170
200
140
150
160
ORDER INFORMATION
AZ40
GUN with aircap, nozzle/needle
ø 0,8
ø 1,0
ø 1,2
W0SPG40AG08C
W0SPG40AG10C
W0SPG40AG12C
W2ADU40AG08
W2ADU40AG10
AIRCAP single
NOZZLE + NEEDLE single
with PCG-2P-2B-AZ
cup 200ml
opt. PCG-6P-2B-AZ
cup 600ml
AZ40
GUN with aircap, nozzle/needle
W2CAP41AG12
W2ADU40AG12
ø 1,5
ø 1,8
ø 2.0
W0SPG40AG15C
W0SPG40AG18C
W0SPG40AG20C
AIRCAP single
W2CAP41AG15
W2CAP41AG18
W2CAP41AG20
NOZZLE + NEEDLE single
W2ADU40AG15
W2ADU40AG18
W2ADU40AG20
SPOT REPAIR
LPH-80
PREMIUM
Quality
FEATURES
Gold
• Especially for small repair jobs and areas, that are hard to reach
• Very fine atomization with low air consumption (60l/min)
• Extremely low material consumption
• Perfect handling when blending
• Characteristically for ANEST IWATA: quiet and pleasant background noise
• With 205g one of the most lightweight Spot Repair guns on the market
• Simple operation of the control knobs, for right and left handers
• Conical seal nozzle, minimum wear parts
• Clearer design, easy maintenance
• Quality surface for an easy cleaning
• Compatible with the 3M PPS cup system (Adapter Type 31)
Technical
Data
LPH-80-044G
0.4
10
55
LPH-80-064G
0.6
LPH-80-084G
0.8
LPH-80-104G
1.0
60
130
LPH-80-124G
1.2
75
140
30
E4
1.0
80
45
60
100
13
with PCG-1P-1
cup 70ml
ORDER INFORMATION
opt. PCG-3P-1
LPH-80
cup 250ml
GUN with aircap, nozzle/needle
ø 0,4
ø 0,6
ø 0,8
ø 1,0
ø 1,2
131807072P
131807172P
131807472P
131807272P
131807372P
93560600
93760530
AIRCAP single
93662600
NOZZLE single
93570600
NEEDLE single
93891600
93568600
93761530
93890600
93886600
3M PPS Type 31
LVLP
Low Volume Low Pressure
TECHNOLOGY
SMART REPAIR
SPOT REPAIR
Blending or hue adjustment,
basecoat is painted over the damaged area
and then completely painted with clearcoat,
Small refinishing up to a size of about 3.5cm,
partial repairs.
full coating of small parts such as wheel
covers, mirror caps and spoilers.
January 2016 I Errors and technical alterations reserved.
SPOT REPAIR
SMART REPAIR
further development of HVLP Technology
AIRBRUSH
Airbrush Guns
PREMIUM
Quality
kustom Series
Gold
FEATURES
• High End Airbrush spray gun for professionals in kustom painting
• Extreme control of ultra fine-line spray
• Silky-smooth atomization
• Ultimate paint-flow control with hand-tuned, hand-adjusted performance
• Teflon packing, large cups, pre-set handles, taller triggers
• „MAC-System“ air regulation on material output (Micron CM, Hi-Line CH)
ORDER INFORMATION
14
HIGH
kustom Series
Cup
ø 0,23
ø 0,30
ø 0,35
kustom Micron CM
14 ml
K 9000
-
-
kustom Revolution TR
21 ml
-
K 9400
-
kustom HI-Line CH
14 ml
-
K 9100
-
kustom Eclipse CS
14 ml
-
-
K 9300
Quality
Eclipse Series
Silver
FEATURES
• Allround Airbrush spray gun
• Double-Action = independent air and material control
• Paint flow control
• Self-centering nozzle
• Quick change of nozzles without tools
• Easy to clean with plug nozzle
• Also available with a suction cup system (HP-BCS)
ORDER INFORMATION
STANDARD
Eclipse Series
Cup
ø 0,35
ø 0,50
Eclipse HP-CS
9 ml
ECL 4500
-
Eclipse HP-BS
1,8 ml
ECL 2500
-
Eclipse HP-BCS
28 ml
-
ECL 2000
Quality
neo Series
Bronze
January 2016 I Errors and technical alterations reserved.
FEATURES
•
•
•
•
User friendly pricing attracts new customers to the iwata Airbrush world
Double-Action = independent air and material control
Incl. removable cup 7.0ml and 1.8ml or without cup for small quantities 1.0ml
Also available with a suction cup system (HP-BCN)
ORDER INFORMATION
neo Series
Cup
ø 0,35
ø 0,50
neo HP-CN
2 ml/9 ml
N 4500
-
neo HP-BCN
28 ml
-
N 2000
AIRBRUSH
Airbrush Sets
Deluxe Set
FEATURES
Airbrush deluxe set inclusive
• HP-CS Airbrush gun Eclipse
• IS 850 Smart Jet Compressor
• Quick Fit Set
• Table Top Cleaning Station
• Kit a OPAQUE Primary
• Pistol Grip Moisture Filter
• Lubricant 14ml
• DVD Eddie Young
• Cleaner 112ml
• Freehand Airbrush Template
ORDER INFORMATION
Code
Description
DLXIS850CS
AIRBRUSH DELUXE SET
15
Starter Kit
FEATURES
Airbrush starter kit inclusive
• HP-CR Airbrush gun Revolution
• IS50 Silver Jet Compressor
• HPA CH 41 Air Hose 1/8-1/8
Code
Description
CRIS50BLKDE
AIRBRUSH STARTER KIT
January 2016 I Errors and technical alterations reserved.
ORDER INFORMATION
CUSTOM PAINTING
RG-3L
HIGH
Quality
Silver
FEATURES
• Specifically for decorative paintings with normal nozzles
• Used for modeling, contours painting and graphics
• Fine atomization
• For right and left handers
• With side cup for best control when working
• Individual angle adjustment of the cup, head first working is possible
• Very low air requirement, only 30 to 50Nl/min depending on nozzle size
• Conical seal nozzle, minimum wear parts
• Clearer design, easy maintenance
Technical
Data
RG-3L 1
0.4
1
RG-3L 2
0.6
2
RG-3L 3
1.0
3
15
2.5
35
25
30
35
80
ORDER INFORMATION
RG-3L
16
ø 0,4
ø 0,6
ø 1,0
GUN with aircap, nozzle/needle
13058606
13058616
13058626
AIRCAP single
93022890
93025880
93026880
NOZZLE single
93042880
93041880
93040890
NEEDLE single
93910880
93937880
93938880
with PC-52 AG
side cup 200ml
STANDARD
Quality
AZ5
Bronze
FEATURES
• Robust hobby spray gun for decorative paintings with normal nozzles
• Simple operation of the control knobs, for right and left handers
• Large nozzle selection
• Costs for replacement of spare parts are extremely customer friendly
• Compatible with the 3M PPS cup system (Adapter Type 43)
Technical
Data
0.3
January 2016 I Errors and technical alterations reserved.
AZ5
3
0.5
5
0.8
8
1.0
10
19.6
3.0
26.9
100
130
110
170
140
41.6
62.9
130
ORDER INFORMATION
AZ5
with PCG-1P-1B-AZ
cup 70ml
ø 0,3
ø 0,5
ø 0,8
ø 1,0
GUN with aircap, nozzle/needle
W0018000003
W0018000005
W0018000008
W0010000010
AIRCAP single
W2011140200
W2011140700
W2011140800
W2011140900
NOZZLE + NEEDLE single
W2012330800
W2012330900
W2012331000
W2012331100
COMMERCIAL VEHICLE APPLICATION
W-200 pressure Series
PREMIUM
HIGH
Quality
FEATURES
Gold
Quality
Silver
W-200 WB
Split nozzle
•
•
•
•
•
High speed operation while maintaining the same surface quality
VOC-compliant professional spray gun, significantly more than 65% efficiency
Large and uniform flat&thin spray pattern with fine atomization for large areas
W-200 WB with Split Nozzle Technology
W-200 with Round Nozzle
• Characteristically for ANEST IWATA: quiet and pleasant background noise
• With 380g one of the most lightweight pressure spray guns on the market
• Simple operation of the control knobs, for right and left handers
• Conical seal nozzle, minimum wear parts
• Clearer design, easy maintenance
• Quality surface for an easy cleaning
• Combinable with all ANEST IWATA diaphragm pumps and pressure tanks
• Available: fan pattern control for permanently switching and push-pull pattern adjustment
set for fast briefly switching
W-200
Round nozzle
W-200 WB
W-200
Split nozzle
Round nozzle
17
Technical
Data
W-200 Round nozzle
thumb lever perm. switching
code W-200-X1
thumb lever briefl. switching
W200-082P
0.8
W200-102P
1.0
W200-122P
1.2
W200-152P
1.5
W200-082P
0.8
W200-102P
1.0
W200-122P
1.2
LV2
2.0
255
360
280
G2P
3.0
500
560
400
W-200 WB Split nozzle
lock. fluid adjust screw
code 93895611
code 93605600
lock. pattern adjust screw
fluid tube stainless steel
W200-WB-081P
0.8
WB(S)1
W200-WB-101P
1.0
WB(S)1
W200-WB-121P
1.2
WB(S)1
W200-WB-141P
1.4
WB(S)1
200
1.6
250
300
350
360
340
380
ORDER INFORMATION
code W2COM5052
quick coupling with nipple
ø 0,8
ø 1,0
ø 1,2
GUN G2P with aircap, nozzle/needle
13240505
13240496
13240500
-
GUN LV2 with aircap, nozzle/needle
13240003
13240004
13240100
13240110
AIRCAP G2P single
-
93830610B
AIRCAP LV2 single
NOZZLE + NEEDLE single
W-200 WB
code DE510004
93818610B
ø 1,5
93889610
93890610
93891610
93822610
ø 0,8
ø 1,0
ø 1,2
ø 1,4
GUN WBS1 with aircap, nozzle/needle
13243250
13243260
13243270
13243280
GUN WB1 with aircap, nozzle/needle
13240800
13240810
13240820
13240821
AIRCAP WBS1 single
93640620
93609620
AIRCAP WB1 single
NOZZLE + NEEDLE single
93606620
93612620
93616620
93643620
January 2016 I Errors and technical alterations reserved.
code 03841601
W-200
DOUBLE DIAPHRAGM PUMPS
DPS-120
FEATURES
ANEST IWATA diaphragm pumps in a compact design are the perfect choice for the delivery
of liquid media (solvent and water-based paints) for the supply of manual and automatic
spray guns.
The reliable pump motor combined with the Double Spool air circuit promises an excellent
finish. The pneumatic control system prevents the forced stoppage of the pump (control
meets EN12621).
Dead storage material channels and easily collapsible pump structure facilitate cleaning
and inspection.
1. supply of manual and automatic spray guns
2. compact stylish design
3. fully pneumatic pump control with Double Spool air circuit
4. individual pump models
5. wear-resistant pump assembly
6. easy inspection and cleaning
• mounted on wheel cart; with paint regulator, 2 air regulators,
paint filter unit, fluid recirculation, ball valve with exhaust hole,
overpressure valve, dip pipe
• model: stainless steel oder alum. anodized
• also available with a two way connection (Stainless Steel)
18
MODELS
TECHNICAL DATA
Ratio
1
1:1
7 bar (100 psi)
Paint Viscosity
85 sec/Ford#4
on Stand
Max. Working Pressure
Working Temperature
• Dimensions mm: 409 x 358 x 806
• Weight: 13.9kg Stainless Steel
• Weight: 10.5kg Alum. anodized
Fluid Output at 30 cyc/min.
4.5 lt./min
Paint outlet filter
100 mesh
5~40 °C
Fluid Output at 200 cyc/min. max.
30 lt./min
Suction paint filter
50 mesh
on Tank Mount
ORDER INFORMATION
2
• Dimensions mm: 357 x 312 x 798
• Weight: 12.1kg Stainless Steel
• Weight: 9.6kg Alum. anodized
3
on Cart with suction pipe
• Dimensions mm: 437 x 452 x 868
• Weight: 15.5kg Stainless Steel
• Weight: 13.0kg Alum. anodized
DPS-120
mounted
Code
stainless
steel
Code
aluminum
anodized
1
ON STAND
14069040
14069050
2
ON TANK MOUNT
14069120
14069130
3
ON CART WITH SUCTION PIPE
14069200
14069210
4
ON WALL MOUNT
14069280
14069290
5
ON CART WITH HOPPER
14069360
14069370
Diaphragm Pumps without gun and without air hose set.
January 2016 I Errors and technical alterations reserved.
4
on Wall Mount
• Dimensions mm: 363 x 214 x 534
• Weight: 12.0kg Stainless Steel
• Weight: 9.5kg Alum. anodized
Two way connection
on Cart with Hopper
Air hoses
TWO WAY CONNECTION STAINLESS STEEL
Code
04493980
5
• Dimensions mm: 526 x 528 x 868
• Weight: 15.5kg Stainless Steel
• Weight: 13.0kg Alum. anodized
Code
TWIN HOSE 1/4” - 3/8” 6 MT.
VLPS166GR06B
TWIN HOSE 1/4” - 3/8” 10 MT.
VLPS166GR10B
TWIN HOSE 1/4” - 3/8” 15 MT.
VLPS166GR15B
PAINT PRESSURE TANKS
PET-N Series I PET-10 I PC-18 D
PET-N Series (max. 7.0 bar)
FEATURES
•
•
•
•
•
•
•
•
•
•
•
stainless steel container, polished inside
PET 10 (10 lt.), PET 30 (30 lt.), PET 50 (50 lt.)
N: without pneumatic agitator
MN: with pneumatic agitator
second material connection (optional)
no additional lubrication of drive required
PET 50 N suitable for Euro-Hobbock
all models conform to ATEX
max. operating pressure: 7.0bar
air inlet joint: G 1/4“M; fluid outlet joint: 3/8“M; operating temperature: 5-40 °C
weight:
PET 10 N 15.3kg, PET 10 MN 17.5kg
PET 30 N 20.4kg, PET 30 MN 22.6kg
PET 50 N 25.6kg, PET 50 MN 28.2kg
• dimensions: PET 10 N/MN 540x330mm
PET 30 N/MN 710x415mm
PET 50 N/MN 810x470mm
Pneumatic Agitator - AM-6B
ORDER INFORMATION
operating pressure: 1-1.5bar,
air consumption: 15 Liter/min,
max. air inlet pressure: 7.0bar
description
without RW
Code
with RW
Code
PET-N 10 (10 Liter)
14972600
14972620
PET-N 30 (30 Liter)
14972630
14972650
PET-N 50 (50 Liter)
14972660
14972680
19
PET-10 (max. 4.0 bar)
FEATURES
ORDER INFORMATION
description
Code
PET-10
14972400
PC-18 D (max. 3.5 bar)
FEATURES
• Small Paint Pressure Tank aluminum; 2 liter
• max. operating pressure: 3.5bar; operating temperature: 5-40 °C
• Fluid Nipple: G 3/8“ (PF3/8)
ORDER INFORMATION
description
Code
PC-18 D
14018900
AIR HOSE 1,5 MT.
VLPS166GR150B
January 2016 I Errors and technical alterations reserved.
INNER TANK
stainless steel
• paint pressure tank with stainless steel inner tank for easy filling of the appropriate
material and a trouble-free interior cleaning
• robust construction
• suitable for hydraulic products
• carry handle for quick and easy transport
• equipped with locking lid, 2 controllers, 2 pressure gauges and safety valve
• conform to ATEX
• max. operating pressure: 4.0bar
• tank capacity: 10 liter, inner tank 8.5 liter stainless steel
• air inlet joint: G 1/4“M; fluid output joint: 3/8“M
• operating temperature: 5-40 °C
• weight: 11kg; dimensions: 310x310x565mm
AIR FILTER
single-stage I double-stage I tri-stage
FEATURES
FILTER
Single-Stage
(Pre filter)
•
•
•
•
•
•
•
•
•
•
Air Filter Regulator - constructed modular - for dry and clean compressed air
precise regulation of operating pressure
with pressure gauge (from 0 bis 10.0 bar)
with safety quick coupling for a secure connection and disconnection
removes oil, water, particles and oil vapours/odours; filtration efficiency: 99,9%
robust and of high quality for a long life
filter body and bowl treated with anti-corrosion coated
low-maintenance design
space saving
lower installation costs
Technical Specifications
• air inlet: G 1/2“
• air outlet (2 pieces): G 1/4“
• testpressure: 15.0bar
• max. operating pressure: 10.0bar
• max. surrounding temperature: -5 bis 60 °C
1
1
PRE FILTER
to remove condensate and oil from compressed air and for particle absorption down to 5 µ
5 µ Pre Filter, filtration efficiency: 99%
FILTER GROUP
Double-Stage
(Pre & Fine filter)
20
2
FINE FILTER
for particle absorption down to 0.01 µ
0.01 µ Fine Filter, filtration efficiency: 99,9%
3
ACTIVE CARBON FILTER
to remove oil/oilvapours and odours from compressed air for breathing purposes
ORDER INFORMATION (FILTER & FILTER GROUPS)
1
Code
Description
D9250112
FILTER SINGLE-STAGE,
Pre filter (G 1/2”IG)
with pressure regulator, air distribution (2x G 1/4”AG) and
safety quick coupling (2x NW 7,2; ¼“ IG)
D9250222
FILTER GROUP DOUBLE-STAGE
Pre and Fine filter (G 1/2”IG)
with pressure regulator, consumption display, air distrinution (2x G
1/4”AG) and safety quick coupling (2x NW 7,2; ¼“ IG)
D9250232
FILTER GROUP TRI-STAGE
Pre and Fine and Active Carbon Filter (G 1/2”IG)
with pressure regulator, consumtion display, air distribution (2x G
1/4”AG) and safety quick coupling (2x NW 7,2; ¼“ IG)
2
FILTER GROUP
Tri-Stage
(Pre & Fine &
Active carbon filter)
WITH SAFETY QUICK COUPLING
1. STEP: Bleeding
2. STEP: Uncoupling
January 2016 I Errors and technical alterations reserved.
For safe disconnection with minimum effort with one hand
without the risk of a whip chop.
1
2
3
ACCESSORIES
Air hoses I pressure gauge
PREMIUM ANTISTATIC AIR HOSE
PREMIUM
FEATURES
High Quality ANTISTATIC AIR HOSE with high-strenght synthetic textile braid
Available in 3 different lengths | 6 mt - 10 mt - 15 mt
• Clamped with fittings and safety quick coupling: air hose is vented in a first step and can then be safely
disconnected in the second step
• Very light, flexible in itself, noticeably handier
• Conductivity: R<MOhm EN1953
• Inner diameter ø 9 mm, outer diameter ø 15 mm
• Max. operating pressure 15 bar
• Weight with standard length of 10 mt: 1,5 kg
ORDER INFORMATION
safety quick coupling
Step 1: Bleeding
Step 2: Uncoupling
Code
Description
00600916P
PREMIUM ANTISTATIC AIR HOSE MOUNTED (6 mt)
001000916P
PREMIUM ANTISTATIC AIR HOSE MOUNTED (10 mt)
001500916P
PREMIUM ANTISTATIC AIR HOSE MOUNTED (15 mt)
W3COM6085
SAFETY QUICK COUPLING NW 7,2; spout ø 9mm
Premium antistatic air hose also unmounted available.
STANDARD ANTISTATIC AIR HOSE
21
FEATURES
flexible Standard ANTISTATIC AIR HOSE
Available in 3 different lengths | 6 mt - 10 mt - 15 mt
• Clamped with fittings and quick coupling
• Inner diameter ø 9 mm, outer diameter ø 15 mm
ORDER INFORMATION
quick coupling
Code
Description
00600916
STANDARD ANTISTATIC AIR HOSE MOUNTED (6 mt)
001000916
STANDARD ANTISTATIC AIR HOSE MOUNTED (10 mt)
001500916
STANDARD ANTISTATIC AIR HOSE MOUNTED (15 mt)
W3COM6086
QUICK COUPLING NW 7,2; spout ø 9mm
AFV-2 PRESSURE GAUGE
AFVAFV-2
FEATURES
ORDER INFORMATION
WITH QUICK COUPLING
Code
Description
14378630
AFV-2 PRESSURE GAUGE WITH QUICK COUPLING
January 2016 I Errors and technical alterations reserved.
• Air pressure gauge/regulator with quick coupling
• control range 0-6 bar
ACCESSORIES
Health protection masks
AIRFED 2010 Full face mask
FEATURES
One of the biggest risks to the health of the human body is the inhalation of dust, paint mists,
gases, vapors or other contaminants, which can be greatly hazardous to our health, even in
small quantities.
For this reason, it is of extreme importance to use masks to protect against respiratory aggressions that you can undergo during job in a saturated environment of toxic substances.
The AIRFED 2010 Full Face Mask is functional and stylish. Suitable for use with previously
filtered compressed air. Conforms to the European Standards for light duty.
• Very good all-round visibility with large visor
• Head protection and comfort headband
• Visor with quick-change protection film
• Individually adjustable belt
• Easy to adjust width
• Adjustable fresh air regulator
• Activated carbon filter
• Air indicator
• 1.5m hose (inside diameter 8mm)
• Supplied in Hygienebox
Hygiene BOX
22
ORDER INFORMATION
Code
Description
VIUAF2010KIT
AIRFED 2010 FULL FACE MASK KIT
VIPER Half face mask
FEATURES
The spectrum of action of harmful substances is large and it is necessary to carefully identify
the specific risks present in each workplace. The half mask respirators have 2 different ranges
of filters that offer effective protection against dust, gases and vapors.
Only wearing protective masks and their correct use can ensure an effective protection of the
health against toxic substances.
January 2016 I Errors and technical alterations reserved.
A2P3
• Suitable for all paint work
• Full unobstructed field of vision
• Quick bayonet fittings
• Secure fit during use
• Large filter surfaces
• High protection
• Built-in inhalation valves in the filter
• Low inhalation resistance
• Supplied in Hygienebox
Hygiene BOX
ORDER INFORMATION
Code
Description
VMIVIPER123
VIPER GUARD MASK with A2P3 Filter
By using the mask a separate goggles is required.
ACCESSORIES
VISIONSHIELD series I Premium overall
VISIONSHIELD SERIE
FEATURES
VISIONSHIELD GOGGLES for wearer of glasses
modern and versatile, designed for maximum compatibility with different frame models. These
goggles is a good all-round visibility and allows wearing over a variety of prescription.
•
•
•
•
Polycarbonate lens and soft rubber frame correspond to the standard 1BT
High impact resistance for long-term use
Scratch resistant lens filters out 99.9% of harmful UV radiation
Resistant to chemical attack
VISIONSHIELD GLASSES
modern with small, stylish strap loins for an excellent fit. Extremely lightweight and comfortable.
• Polycarbonate lenses and frame to ensure high protection
• High impact resistance for long-term use
• Scratch-resistant lens filters out 99.9% of harmful UV radiation
• adjustable nose piece: the soft nose bridge is adjustable and prevents slipping of glasses
23
ORDER INFORMATION
Code
Description
AGN020-441-3P0
VISIONSHIELD GOGGLES for wearer of glasses
ASA770-15K-4PO
VISIONSHIELD GLASSES
UVA-UVB
PROTECTION
PREMIUM OVERALL
FEATURES
Modern ANEST IWATA Overall from lint-free polyester fabric. Filament yarn woven from
carbon for the dissipation of any electrical charge. Antistatic according to EN 1149-1. Flame
retardant fabric according to EN ISO 14116: 2008 Index 1 (formerly EN 533). Dirt and water
repellent. Reinforced stitching.
ORDER INFORMATION
Code
Description
Size
W2COM6336
PREMIUM OVERALL
S (46)
W2COM6337
PREMIUM OVERALL
M (48)
W2COM6338
PREMIUM OVERALL
L (50)
W2COM6339
PREMIUM OVERALL
XL (52/54)
January 2016 I Errors and technical alterations reserved.
• long, concealed 2-way front zipper
• adjustable waist
• removable hood with resizing
• armhole and leg opening with lint microfiber cuffs
• underarm ventilation
• air hose holder on the back
• an inside chest pocket
• two front pockets
• a back pocket with Velcro closure
ACCESSORIES
Magnetic supports I Gravity gun holders
MAG STAND Series
FEATURES
• Practical for every bodyshop, fast, flexible and reliable adhesion on all metal surfaces
thanks to an extra-strong all-surface magnet
• Hold up to 20 kg (each holder, measured on a clean metal surface) except 2
• Easy to mount on wall, no screws or drills needed.
• Easy removal before applying the cab protector or eqivalent without consuming masking or
cutting
• Prevent potential accidents
• Significant space savings in working area
1
1 Magnetic spray gun holder 3 spray guns
• 32cm x 15cm x 13,5cm
3
2 Magnetic spray gun holder 1 spray gun
• 8cm x 15cm x 13,5cm
2
3 Magnetic adapter holder for spray guns with adapter
• universal mounting for all adapters
• fixing on the magnetic spray gun holder
4 Magnetic air hose holder
• 32cm x 20cm x 14cm
24
4
ORDER INFORMATION
Nr.
Code
Description
1
W2COM6052
MAGNETIC SPRAY GUN HOLDER (3 spray guns)
2
W2COM6120
MAGNETIC SPRAY GUN HOLDER (1 spray gun)
3
W2COM6093
MAGNETIC ADAPTOR HOLDER (PPS-RPS)
4
W2COM6094
MAGNETIC AIR HOSE HOLDER
Gravity gun holder
FEATURES
1
Suitable to hold gravity guns after use or during the filling of the cup.
Available in 2 versions with base:
1 Multiple Central Gravity for 3 spray guns
January 2016 I Errors and technical alterations reserved.
2 Single Central Gravity for 1 spray gun (wall mountable)
ORDER INFORMATION
2
Nr.
Code
Description
1
W2501000500
CENTRAL GRAVITY GUN HOLDER (3 spray guns)
2
W2501000100
CENTRAL GRAVITY GUN HOLDER (1 spray gun)
WALL MOUNTABLE
ACCESSORIES
Magnetic spray tester I Demo trolley
Magnetic spray tester
FEATURES
• Portable spray pattern tester for regular monitoring of the spray pattern quality
• Fast, flexible and reliable adhesion of the spray pattern tester on all metallic surfaces
thanks to an extra-strong full-surface magnet
• Easy adhesion gives uncomplicated wall mounting – no need for drilling or screws
• Height of the spray pattern tester fast and customizable to each user
• Spray pattern tester lid opens downward for more freedom in the spray pattern test
• Spray pattern tester lid also adheres to all metal surfaces thanks to a further integrated
magnet
• Perfect horizontal alignment by an integrated vial in the spray ruler
• Dimensions: 46 cm (B) x 75 cm (H) x 5 cm (T)
LEVEL VIAL IN SPRAY RULER
25
WITH SPRAY RULER
ORDER INFORMATION
Code
Description
W2COM6118DEKIT
MAGNETIC SPRAY TESTER with paper block and ruler
DEMO TROLLEY for technicans
15x telescopic twist
case for nozzle /needle
FEATURES
• ANEST IWATA Demo trolley as a practical trolley for
pulling behind
• incl. containers kit for needles / nozzles and aircaps
(22 parts)
• robust and shockproof/dust and waterproof
• flexibly be equipped, also suitable for spray guns and
accessories from other manufacturers
5x Spray guns
2x small
Spray guns
2x Pressure gauge
• dimensions: 604 (W) x 473 (D) x 283 (H) mm
• weight empty: 9 kg
• IP 67 rating; Material 100% recyclable
ORDER INFORMATION
Code
Description
VPATR-IW01
DEMO TROLLEY with containers kit
1x gravity cup 70ml
flexibly be equipped: Gravity cups & Cleaning kits I bulky parts I shapeable foam
documents &
accessories holder
January 2016 I Errors and technical alterations reserved.
7x case with cap
for aircap
ACCESSORIES
Undercoat gun I Sandblasting gun
AZ PVA TN Undercoat gun
FEATURES
• robust undercoat gun for the processing of stone chip and underbody protection products
• with suction tube and connection for 1 liter standard doses
• adjustable fluid nozzle for adjustment of material quantity and spray pattern
• air consumption: 322 lt. / min at 6 bar
• 650g
ORDER INFORMATION
1 Liter standard dose
Code
Description
W0012200000
AZ PVA TN UNDERCOAT GUN
26
ST Series Sandblasting gun
ST
for large areas
FEATURES
• Sandblasting guns
• ST: with flexible suction hose 1.5 m (air consumption 320 l / min, weight 1.020 grams)
• ST1: 1 liter of AG-1 aluminum suction cup and adjustable nozzle (air consumption 308 lt /
min.; weight 780 grams)
with 1,5 Meter flexible suction hose
ST1
January 2016 I Errors and technical alterations reserved.
for small areas
adjustable
nozzle
with 1 Liter aluminium suction cup
ORDER INFORMATION
Code
Description
W0030500050
ST SANDBLASTING GUN ø 5.0mm with air hose
W0030510150
ST SANDBLASTING GUN ø 5.0mm without air hose
W0030500060
ST SANDBLASTING GUN ø 6.0mm with air hose
W0030510160
ST SANDBLASTING GUN ø 6.0mm without air hose
W0030600000
ST1 SANDBLASTING GUN with AG-1 suction cup
ACCESSORIES
AQUADRY Paint Dryer
FEATURES
1
• AQUADRY Paint Dryer for drying waterborne basecoat
• Venturi effect increases the volume of air up to six times of the amount of air
• Variable air flow
1 single (Paint dryer gun) or
2 as a set (2 Paint dryer guns with stand)
• with stand: each gun can be used independently
• stand dimensions: H 210cm x B 80cm; stand is continuously adjustable at the side and in height
• max. operating pressure: 7.0bar; max. air volume: 2x600l/min
27
ORDER INFORMATION
Code
Description
13908402
AQUADRY Paint Dryer Gun single
UIKIT60100
AQUADRY SET: Stand with 2 Paint Dryer Guns & Fittings
January 2016 I Errors and technical alterations reserved.
2
ACCESSORIES
Cleaning Applicator PCA12.0 & HCA12.0 (max. 12.0 bar)
PREMIUM
Quality
Gold
FEATURES
• High quality, robust pump spray bottle for quick cleaning of spray guns
• special, adjustable nozzle ø 0.8 mm (nickel-plated brass)
• powerful piston pump (nickel-plated brass) for an operating pressure up to 12.0 bar
• 1 liter capacity with large opening
• level indicator and measurement scale
• perfect stability
• ergonomically shaped handle for easy operation
• PCA12.0 with solvent-resistant specialty gaskets (BMS 2010 black)
- for use with aggressive cleaners, resistant to all common solvents
• HCA12.0 with chemically resistant Viton seals (FKM (Viton) green)
- for use with mild cleaners, to 95% for cleaning of basecoat
acids
alkalis
solvents
aggressive
cleaners
resistant
28
adjustable
nozzle Ø 0,8mm
resistant
gaskets
HIGH
Quality
Silver
Powerful piston pump
(nickel-plated brass) for
an operating pressure
up to 12.0 bar. Easy and
fast dismantled for an
easy cleaning.
TECHNICAL DATA
PREMIUM
PCA12.0
suitable for
- Mineral oil / petroleum products
with acetone
- alcohol
(brake and engine cleaner)
FKM Viton (green)
nickel-plated brass
type of nozzle
adjustable nozzle Ø 0.8 mm (nickel-plated brass)
weight empty
310 g
capacity
1 liter
dimensions
250 mm (height), Ø 120 mm (opening)
Max. operating
pressure
12.0 bar
temperaturerange
Quality
Silver
- Mineral oil-based products
- solvent
- Release agent
- Wax Products
- Emulsions and higher viscosity products
BMS 2010 (black)
pump
January 2016 I Errors and technical alterations reserved.
HCA12.0
Polyethylen transparent white
gasket
mild
cleaners
Gold
Model
material
HIGH
Quality
5° - 50° C
ORDER INFORMATION
Code
Description
W2COM6226
PCA12.0 CLEANING APPLICATOR (BMS 2010 gaskets)
W2COM6225
HCA12.0 CLEANING APPLICATOR (FKM Viton gaskets)
ACCESSORIES
Air duster guns
MINI Air duster gun
MINI
FEATURES
• MINI Air duster dun for dust, cleaning and drying of tools and workplaces
• compact and lightweight (made of the high-tech composite material of polyamide)
• robust for increased durability and insulation for a pleasant working temperature
• precise and powerful with high flow rate and low air consumption
• ergonomically designed and ultramodern
• max. operating pressure: 12.0bar; weight: 90 grams
• for even more user comfort: direct connection to the ANEST IWATA safety quick coupling over the
steel plug nipple
FITS
steel plug
nipple
IN EACH
POCKET
29
safety quick coupling
ORDER INFORMATION
Code
Description
DE510001
MINI Air duster gun
W3COM6085
SAFETY QUICK COUPLING NW 7,2; spout ø 9mm
AG-6 Air duster gun
FEATURES
• conventional Air duster dun for dust, cleaning and drying of tools and workplaces
• weight: 185 grams
ORDER INFORMATION
Code
Description
13908061
AG-6 Air duster gun
January 2016 I Errors and technical alterations reserved.
Step 1: Bleeding
Step 2: Uncoupling
ACCESSORIES
Tipps for cleaning
DISASSEMBLY of atomizing parts
1
2
3
4
11
Take out fluid adj. knob
and needle spring
...and needle as well
Unscrew fluid nozzle with
universal spanner
Take off the air cap
CLEANING & DRYING of spray gun
30
CLEANING
1
2
3
5
4
5
16
Clean the fluid passage
with a brush
Clean the fluid passage
with a brush
Clean the body surface
Dry with air blow gun
CLEANING of atomizing parts
1
2
3
8
3
8
Clean small holes on fluid
nozzle with a special tiny brush
6
4
7
3
Clean tip of the nozzle
carefully with a brush
..and clean nozzle orifice
8
Clean also thread of the
nozzle carefully with a brush
9
8
6
Clean the air cap center
hole
5
Clean the nozzle internal
part with a correct size
brush
10
8
Clean horn holes with
special tiny brush
Clean tiny holes with
cleaning needle
5
and the back side as well
10
Clean needle
ASSEMBLY & MAINTENANCE
1
2
3
4
5
MAINTENANCE
January 2016 I Errors and technical alterations reserved.
90°
11
Assemble fluid nozzle
6
Tighten up the fluid nozzle
with universal spanner
7
15
Grease the fluid adj.
knob screw
Assemble the air cap
and tighten it by hand
8
15
...needle spring
15
Insert the needle
Grease the needle
9
15
..and the air valve bar
behind the trigger
10
12
Adjust (15~60 degree
tighten) needle packing with
spanner
Check if the trigger travel
smoothly
ACCESSORIES
Spray gun maintenance kit I other cleaning tools
“All in one Box”
1
Spray gun maintenance Kit
Spray gun maintenance kit includes
1 Surface Brush, 1 Brush, 1 Flat Brush,
3 Twisted Brushes (Ø 15mm, Ø 10mm, Ø 5mm),
1 Tiny Twisted Brush, 1 Very Tiny Twisted Brush,
12 Nozzle Cleaning Needles, Maintenance Grease
2
ORDER INFORMATION
Brush
3
Flat Brush
4
Surface Brush
5
Nr.
Code
Description
Qty.
1
W2KIT55UK
SPRAY GUN MAINTENANCE KIT
2
W2COM6124
BRUSHES
(5 pcs./1pk.)
3
W2COM6163
FLATBRUSHES
(5 pcs./1pk.)
4
W2COM6125
SURFACE BRUSHES
(3 pcs./1pk.)
5
W2COM6126
TWISTED BRUSHES ø 15mm
(5 pcs./1pk.)
6
W2COM6162
TWISTED BRUSHES ø 10mm
(5 pcs./1pk.)
7
W2COM6161
TWISTED BRUSHES ø 5mm
(5 pcs./1pk.)
8
W2COM6127
TINY TWISTED BRUSHES
(4 pcs./1pk.)
9
W2COM6128
VERY TINY TWISTED BRUSHES
(4 pcs./1pk.)
10
W2COM6164
NOZZLE CLEANING NEEDLES
(12 pcs./1pk.)
11
93505910
UNIVERSAL SPANNER
12
W2COM6129
SPANNER FOR LOCK ADJ. & NEEDLE PACKING
13
03506480K
ALLEN WRENCH for Supernova series
14
93280881
SPANNER for LPH-80/RG-3L
15
W2COM6165
MAINTENANCE GREASE
16
13908061
AG-6 LUFTAUSBLASPISTOLE
31
Twisted Brush ø 15mm
6
Twisted Brush ø 10mm
7
(3 pcs./1pk.)
The bristles of all brushes are resistant to solvents and paint thinner and they are ideal to clean all types of spray guns.
Twisted Brush ø 5mm
9
15
12
Maintenance Grease
Needle Packing Spanner
Very Tiny Twisted Brush
10
Nozzle Cleaning Needle
Spanner for LPH-80/RG-3L
13
Allen Wrench
16
AG-6 Air Duster Gun
January 2016 I Errors and technical alterations reserved.
Universal Spanner
Tiny Twisted Brush
14
11
8
ACCESSORIES
Gun washer
AIUD-800 Washer combination
FEATURES
• simultaneous automatic and manual cleaning possible [up to 3 spray guns: 2 automatic, 1
manual]
• manual cleaning using feed-through brush and fresh dilution jet
• automatic cleaning with timer
• sealed closing air-flush system of spray guns during automatic cleaning process
• includes automatic clear rise
• blow-out in deep drawn exhaust duct
• connector for use with blow gun
• all features are individually adjustable
• two mobile collecting trays for containers of 30, 58 and 60 litres - easy and fast to
change, even with limited space
• weight: 75 kg
• dimension: (B x T x H) 750 x 600 x 1970 mm
• ø exhaust pipe: 100 mm
• pneumatic energy supply: 6 bar
32
ORDER INFORMATION
Code
Description
10400BT02
AIUD-800 WASHER COMBINATION
AI-01 Compact gun cleaner
FEATURES
•
•
•
•
•
•
used universally
AI-01: for manual and automatic cleaning
manual cleaning using feed-through brush and fresh dilution jet
sealed closing air-flush system of spray guns during automatic cleaning process
all features are individually adjustable
available as wall mounting or plus base cabinet calvanized
•
•
•
•
•
weight: 23 kg (wall mounting)
weight: 17 kg (base cabinet calvanized)
dimension: (B x T x H) 640 x 510 x 370 mm
ø exhaust pipe: 60 mm
pneumatic energy supply: 6 bar
January 2016 I Errors and technical alterations reserved.
ORDER INFORMATION
Code
Description
10400BT01
AI-01 COMPACT GUN CLEANER
10400BT11
BASE CABINET CALVANIZED 7kg
Find all other gun cabinet
washers in our separate
catalogue.
ACCESSORIES
Infrared units
VID-3 series (3kw)
FEATURES
• mobile flexible infrared dryer on a robust stable steel frame (with rear locking)
• equipped with three 500 mm 1kw mirror control short waves lamps
• each of the cassettes can be individually horizontally or vertically be adjusted and fixed to
a maximum area to achieve coverage around the vehicle
• cassettes are individually switchable
• cassettes with no fan or filter replacement (maintenance free)
• height adjustment is via a high-locking gas spring and offers an almost weightless
movement of the swing arm
• standard equipped with a standard control system (Power: 0-100%, time: 0-30 min.)
• also available with distance sensor or distance and temperature sensor
• drying area:
1,35 m x 1,10 m*
• dimensions:
1,00 m x 1,00 m x 1,66 m/2,50 m
• available:
XL version (2.70 m)
*Measurement at 500 mm distance
ORDER INFORMATION
code
1 phase
VID-3 series
TECHNICAL DATA
mobile infrared dryer
voltage
phase/s
frequency
amperage
kw
220/240
1
50 Hertz
12.5
3
380/415
3
50 Hertz
4.25
3
mobile infrared dryer with distance sensor
mobile infrared dryer with distance and temperature sensor
code
3 phases
VID-3
VID-3-3P
VID-3-DS
VID-3-DS-3P
VID-3-DSTS
VID-3-DSTS-3P
33
VID-6 series (6kw)
FEATURES
• mobile flexible infrared dryer on a robust stable steel frame (with rear locking)
• equipped with six 500 mm 1kw mirror control short waves lamps
• each of the cassettes can be individually horizontally or vertically be adjusted and fixed to
a maximum area to achieve coverage around the vehicle
• cassettes are individually switchable
• cassettes with no fan or filter replacement (maintenance free)
• height adjustment is via a high-locking gas spring and offers an almost weightless
•
•
•
•
•
movement of the swing arm
standard equipped with a standard control system (Power: 0-100%, time: 0-30 min.)
also available with distance sensor or distance and temperature sensor
drying area:
2,60 m x 1,10 m*
dimensions:
1,00 m x 1,00 m x 1,66 m/2,50 m
available:
XL version (2.70 m)
*Measurement at 500 mm distance
code
1 phase
VID-6 series
TECHNICAL DATA
mobile infrared dryer
voltage
phase/s
frequency
amperage
kw
220/240
1
50 Hertz
26.1
6
380/415
3
50 Hertz
8.7
6
mobile infrared dryer with distance sensor
mobile infrared dryer with distance and temperature sensor
code
3 phases
VID-6
VID-6-3P
VID-6-DS
VID-6-DS-3P
VID-6-DSTS
VID-6-DSTS-3P
Find all other Infrared
units in our separate
catalogue.
January 2016 I Errors and technical alterations reserved.
ORDER INFORMATION
TECH TIPPS
Cut Model of Supernova Series
100% stainless steel
All wetted parts are made of stainless
steel.
34
Perfect balance
The angle of the cup has been designed
with both disposable and standard cups in
mind.The SUPERNOVA design guarantees
perfect balance, even when using disposable cups which being wider and sometimes
longer, copuld affect balance.
Fluid nozzle
The conical seal fluid nozzle promises
cost savings for the purchase of
consumables.
January 2016 I Errors and technical alterations reserved.
Quick and easy release cap
The air cap has a larger thread, making it both robust
and easy to remove and has been designed with low
maintenance in mind.
The larger slots in the air cap ring facilitate quick removal and refitting after cleaning.
Air Regulation
The air regulator allows
to adjust the spray air.
TECH TIPPS
Cut Model of Supernova Series
Easy screw release paint cup system
The screw design fluid joint enables rapid screwing and
unscrewing of the paint cup using only one hand.
Reliable and precise setting
SUPERNOVA spray guns are equipped with high
precision adjustment controls for setting air, fluid and
fan pattern. Moreover, the carefully designed grip gives
the professional painter an easy feel, even when
wearing latex gloves.
35
Coaxial air and fluid valve
The coaxial air and fluid valve ensures
a precise control.
Responsive trigger action
The responsive trigger in stainless steel
gives the user complete control.
Superior surface quality and ergonomic grip
The chrome-plated gun body ensures durability and easy cleaning.
The slim ergonomic grip helps distribute weight and balance through
the wrist, reducing the risk of repetitive strains.
G 1/4”
January 2016 I Errors and technical alterations reserved.
Air nipple
ANEST IWATA Deutschland GmbH
ANEST IWATA CORP.
Mommsenstraße 5, 04329 Leipzig - Deutschland
Tel.+49 341 241 44 30 - Fax +49 341 252 55 95
info@anest-iwata.de - www.anest-iwata.de
Yokohama - JAPAN
HEADQUARTERS:
ANEST IWATA Corporation
Yokohama - JAPAN
www.anest-iwata.co.jp
ANEST IWATA USA Inc.
West Chester - Ohio - U.S.A.
inquiry@anestiwata.com
www.anestiwata.com
ANEST IWATA DO BRASIL COMERCIAL Ltda.
Sao Paulo - BRAZIL
contato@anest-iwata.net.br
www.anest-iwata.net.br
36
ANEST IWATA Coating Solutions Corporation
Yokohama - JAPAN
www.anest-iwataeu.co.jp
ANEST IWATA Russia LLC
Moscow - RUSSIA
tam@anestiwata.ru
www.anestiwata.ru
SOUTHEAST ASIA CO. Ltd.
Bangkok - THAILAND
info@anest-iwata.co.th
http://www.anest-iwatasoutheastasia.com
ANEST IWATA Shanghai Corporation
Shanghai - CHINA
customer@anest-iwata-sh.com
www.anest-iwata-sh.com
ANEST IWATA Taiwan Corporation
Hu-Kuo - TAIWAN R.O.C.
service@anestiwata.com.tw
www.anestiwata.com.tw
EUROPEAN SALES OFFICES:
SALES OFFICES:
ANEST IWATA Italia S.r.l.
Torino - ITALY
info@anest-iwata.it
www.anest-iwata.it
ANEST IWATA Deutschland GmbH
Mommsenstr. 5, 04329 Leipzig - GERMANY
Tel. +49 341 241 44 30
info@anest-iwata.de
Fax +49 341 252 55 95
www.anest-iwata.de
ANEST IWATA France S.A.
Saint Quentin Fallavier, Lyon - FRANCE
info@anest-iwata.fr
www.anest-iwata.fr
ANEST IWATA U.K. Ltd.
St. Neots Cambridgeshire - ENGLAND
enquiries@anest-iwata.co.uk
www.anest-iwata.co.uk
ANEST IWATA Iberica S.L.
Badalona - Barcelona - SPAIN
info@anest-iwata.es
www.anest-iwata.es
ANEST IWATA Scandinavia AB.
Partille, Göteborg - SWEDEN
info@anest-iwata.se
www.anest-iwata.se
ANEST IWATA Polska Sp. Z o.o.
Poznañ - POLAND
info@anestiwata.com.pl
www.anest-iwata.pl
ANEST IWATA Vietnam CO. Ltd.
Ho Chi Minh City- VIETNAM
info@anest-iwata.vn
www.anest-iwatasoutheastasia.com
ANEST IWATA Motherson Coating Equipment Ltd.
Noida - INDIA
sales@aim.motherson.com
www.motherson.com/anest-iwata-motherson.html
SPRAY GUNS &
ACCESSORIES FOR
CAR REFINISH
ANEST IWATA Middle East FZE
Dubai - UNITED ARAB EMIRATES
info@anest-iwata-me.com
www.anest-iwataeu.com
www.anest-iwata.de
ANEST IWATA South Africa Pty Ltd.
Johannesburg - REPUBLIC OF SOUTH AFRICA
www.anest-iwata.co.za
ANEST IWATA Australia Pty Ltd.
Sidney - AUSTRALIA
info@anest-iwata.com.au
www.anest-iwata.com.au
www.facebook.com/
ANESTIWATADeutschland
valid from 01.01.2016 I January 2016
January 2016 I Errors and technical alterations reserved.
PT. ANEST IWATA Indonesia
Jakarta - INDONESIA
www.anest-iwatasoutheastasia.com
Download PDF
Similar pages