CLEANING

Always unplug from power outlet before cleaning.

Clean the Power Unit (6) with a soft and slightly damp cloth. Do not wash unit under running water or submerge in water or any liquids.

All accessories can be washed by hand or in the dishwasher:

- for hand washing, use tepid water with dishwashing liquid, with extra care in handling the blade as it is very sharp;

- for dishwashing, place accessories on the upper part of the dishwasher and make sure the water never exceeds maximum temperature of 50℃

Do not use chemical or abrasive substances.

Note: After cleaning, make sure accessories/parts do not have waste/dirt residue which may prevent the unit from functioning properly. If necessary use a soft brush to clean residue.

The blades cannot be sharpened. Replace them if they are not cutting properly or are worn. Contact an authorized service centre to purchase accessories/ parts liable to wear and for maintenance work on your appliance.

STORAGE

Make sure your appliance and all its accessories are completely dry before putting them away.

Your food processor has a space-saving storage system where all accessories can be put away in the bowl tidily.

 WEEE

The WEEE directive requires that old or defective electrical and electronic products must disposed off in environmentally sound way. The symbol means that your product must be collected separately. Please contact your community for the nearest collection center.

INSTRUCTION MANUAL

TU031

III. Slicing & Shredding Function

- Fix the slicing/shredding knife to the knife support (Diagram 9).

- Put the bowl on the power unit first and then turn the bowl clockwise until it locks into place. Put the knife support on the axis in the middle of the bowl

(Diagram 10).

- Put the cover on the bowl and turn until it locks into place. Fix the plug to the electric socket, press the power switch and then choose the right level. Slowly insert your ingredients down the tube. You can use the measuring cup to help push down the ingredients (Diagram 12).

-When the operation is finished, cut off the power supply by pressing the

LCD power switch button. After the blade stops completely, pour out the food.

Ⅳ Juicing Function

1. Put the bowl on the power unit first and then turn it clockwise until it locks to place. Fix the filtrating plate and juice drill to the bowl (Diagrams 13 & 14).

2. Fix the plug to the electric socket, turn the switch to 1,

3. Cut fruit/s into halves, slowly push down the juice drill (Diagram15).

4. Pour out the juice.

B: Blender jug

-Put stuff into the blender jug and place the jug on the power unit and then turn it clockwise.

-Make sure that the jug is covered tightly.

GENERAL INSTRUCTIONS

·Please read this handbook as it gives important instructions about safety, use and maintenance of your appliance and keep it for future reference.

·Make sure the data on the appliance rating plate corresponds to that of the main power supply and of your electrical system before plugging into the outlet. In case of doubt, contact professionally qualified personnel.

·It is advisable not to use adaptors, multiple plugs and extensions. Use devices certified and conforming to existing safety standards, making sure they are compatible with your electrical system and with the appliance technical data.

·Any installation not conforming to instructions may endanger your safety and forfeit the guarantee.

·The appliance must be used for the purpose for which it was designed only, i.e. prepare food for domestic use.

·For safety’s sake be careful:

-not to use the appliance with bare feet or wet hands or feet

-not to leave the appliance exposed to sun or rain

-not to allow children or incapable individuals to use the appliance

-never tug on the lead or appliance itself to unplug from the outlet

-not to leave the appliance plugged into the main power supply unattended

-never submerge the appliance in water any liquids.

· Switch off and do not mishandle the appliance if it should breakdown and/or work badly. Contact an authorized service centre for eventual repairs, asking for original spares.

· Put the appliance out of service at the end or its service life by cutting off the lead after unplugging from the outlet. Abide by local existing rules and regulations for its disposal.

·Observe a maximum of 40s for continued operation of the appliance, then rest 30 min before restart.

TECHNICAL SPEC

：

Voltage：220-240V 50Hz

Power： 1000W

Structure:

⑴ Measuring Cup

⑵ Blender Jug cover

⑶ Blender Jug

⑷ Switch Connecter

⑸ LCD Power Switch

⑹ LCD Display

⑺ LCD Control Buttons

⑻ Top Cover

⑼ Measuring Cup

⑽ Bowl Cover

⑾ Bowl

⑿ Turn Axis

⒀ Sredding Knife

⒁ Slicing Knife

⒂ Knife Support

⒃ Plastic Blade

⒄ Whisking Blade

⒅ Blade Cover

⒆ Protect Cover

⒇ Spatula

-Connect the power plug of the machine and switch on the food processor. Turn the knob to the required level (The speed is increased by levels. PULSE is the highest level).

-You can add some liquid material (such as oil, cream if any) to the food when mixing from tube entrance if necessary;

-Please cut off the power supply by pressing LCD power switch button after working. Pour the mixed food out of the Blender jug.

INGREDIENTS LIST:

-Bowl:

FUNCTION

SLICING

INGREDIENT

MURPHY

MELON

CARROT

MEAT

HAM

MAX QUANTITIES

500g

500g

500g

500g(about 10g/piece)

400g(about 15g/piece)

MAXIMUM TIMES (s)

SLICING SHREDDING

40s

40s

40s

40s

40s

40s

40s

40s

CHOPPING

&

WHISKING

ONIONS

EGG

STRAWBERRY

CHEESE

ALMONDS

HAZELNUTS

500g(about 20g/piece) ten yolks

300g

200g

200g

200g

WALNUTS 200g

-Blender jug:

material MAX QUANTITIES apple orange

300g

300g grape 300g strawberry 300g material volume：20X20X20mm

3

/pc，water：450ml.

40s

40s

40s

40s

40s

40s

40s

MAXIMUM TIMES (s)

40s

40s

40s

40s

USING IT FOR THE FIRST TIME

-Read this handbook to familiarize yourself with all the parts of your new food processor.

-Clean all the parts and accessories before using the appliance for the first time (see paragraph “Cleaning”).

Take note:

1. Blades should always be handled with care as they are very sharp.

2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Children should be supervised to ensure that they don’t play with the appliance.

4. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

5. Switch off the appliance before changing or adjusting accessories or parts.

USAGE GUIDE

Your new food processor will help you to prepare a lot of basic mixtures that you can use for your recipes.

Please abide by the following instructions to achieve the best results and to keep your appliance in good working condition.

Warning: Never exceed the maximum quantity level and never pour liquids hotter than 75℃ into the bowl and/or blender.

Follow these instructions:

-Never leave the appliance unattended while it is on.

-Never make the appliance work while it is empty.

-Never touch moving parts.

-Never put your fingers inside the lid opening.

-Never use your bare hands to press down ingredients into the lid opening.

-Do not use the appliance for hard ingredients (e.g. frozen meat, ice), rubbery (e.g. candied peel), or inedible stuff (e.g. bones).

-Do not remove the lid and never replace accessories without switching off the appliance.

II . Chopping Function

- Put the plastic bowl on power unit and turn the handle clockwise (Diagrams 1

& 2).

- Put the blade support on the axis in the middle of the bowl and press it to the bottom. Then fix the chopping blade to the blade support (Diagrams 3 & 4).

Warning: The blade is sharp so hold the plastic part while using.

- Put the food in the bowl (Diagram 5). Big chunks of food should be cut into smaller pieces (approx 2 cm × 2 cm × 2 cm).

- Put the cover on the bowl and turn until it locks to place (Diagram 6 &7).

- Fix the plug to the electric socket then press the LCD power switch button. The background light goes on.

- There are 8 different speeds in all so you can choose a suitable speed according to need by pressing the button “+” or “-”.

- After selecting, press the LCD control button (“ON/OFF”). The appliance should begin to operate (Diagram 8).

- In the process, you can adjust the speed by pressing “+” or “-” buttons. You can also accelerate the speed by pushing the PULSE button. In addition, you can suspend the motion of the appliance by pressing the “ON/OFF” button.

- When chopping is finished, cut off the power by pressing the LCD power switch button. After the blade stops, pour out the food.

II. Whisking Function

Mixing function basically has the same operating steps as the chopping function.

Just change the chopping blade to the shredding blade. It is used for mixing and whisking of food, e.g. eggs.