SPLASH MOUNTED
FAUCETS
12” Swing Spout
14” Swing Spout
K-1
K-11
K-101
K-105
HEAVY DUTY
14” Swing Spout (T&S)
HEAVY DUTY
12” Swing Spout (T&S)
K-112
K-111
12” Swing Spout
Add-A-Faucet
HEAVY DUTY
Pre-Rinse
Faucet (T&S)
K-69
K-59
HEAVY DUTY
14” Swing Spout
8” Swing Spout
HEAVY DUTY
Gooseneck
3-1/2” Gooseneck
16” Swing Spout
Splash Mount Swivel
Gooseneck
K-116
K-114
Replacement Spray
Head & Handle
K-117
6” Extended Spout
K-121
K-119
Eye Wash Attachment
AC/DC powered
Hands-Free
Gooseneck
HEAVY DUTY
Extra Long Faucet
AC & Battery
Operated!
K-123
Service Faucet
K-175
K-170
K-211
Hands-Free Wand
Wrist handle Gooseneck
Wrist Handles
Only
HEAVY DUTY
Pre-Rinse
Faucet
DTA-53
K-240
K-316
K-316-LU
K-114
Replacement Spray
Head & Handle
K-400
Faucet Wall
Mounting Bracket
Repair Kit For
K-1, K-11, K-101,
K-112, K-119
& K-211
Faucet Mounting Kit
K-1, K-11, K-101, K-105,
K-112, K-119
& K-211
Repair Kit can only be used on
faucets purchased after 12/03
K-00
K-06
K-30
Customer Service Available To Assist You
1-800-645-3166
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
G-2
DIMENSIONS and SPECIFICATIONS
TOL ± .125”
ALL DIMENSIONS ARE TYPICAL
SPLASH MOUNTED FAUCETS
Gooseneck Faucet
Swing Spout Faucet
C
L
D
A
B
CL
C
D
A
B
C
C
L
CL
C
L
Standard Faucet conforms to NSF 61 Standard 9. An optional
faucet upgrade is required for compliance to AB 1953 Standards.
K-170 - Eye Wash Detail
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
ALL FAUCET AERATORS
CONFORM TO
ASTM.A112.18.1M
2.0 GPM/7.56 LPM
THREAD: 55/64 - 27 FEMALE
D
Description
A
B
LENGTH
HEIGHT
Repair Kit For K-1, K-11, K-101, K-119 & 211
Faucet Mt. Kit for K-1, K-11, K-101, K-119 & K-211
12” Swing Spout Faucet
14” Swing Spout Faucet
3 1/2” Gooseneck Faucet
Heavy Duty Gooseneck Faucet
8” Swing Spout Faucet
Heavy Duty 14” Swing Spout Faucet
Heavy Duty 14” Swing Spout (T&S) Faucet
Heavy Duty 12” Swing Spout Faucet
Heavy Duty Pre-Rinse (T&S) Faucet
Add-A-Faucet with 12” Spout Faucet
16” Swing Spout Faucet
Splash Mount Swivel Gooseneck Faucet
6” Extended Spout Faucet
Eye Wash Attachment (See Above Detail)
Hands Free AC/DC Operated Faucet
N/A
N/A
12”
14”
3 1/2”
3”
8”
14”
14”
12”
13”
12”
18”
3 1/2”
6”
N/A
4 1/2”
N/A
N/A
5”
5 1/2”
8”
5”
4 1/4”
5”
8 1/4”
5”
34 1/2”
N/A
16”
8”
5”
N/A
7”
N/A
N/A
2 1/2”
3”
5”
2 3/4”
2 1/4”
3”
5 1/2”
3”
13 1/2”
N/A
4”
5 1/2”
2 1/2”
N/A
3 3/4”
N/A
N/A
14”
16”
6”
5 1/2”
10”
16”
16 1/2”
14”
15 3/8”
N/A
18 1/2”
5 3/4”
8”
N/A
5 1/2”
N/A
N/A
8” O.C.
8” O.C.
4” O.C.
4” O.C.
8” O.C.
8” O.C.
8” O.C.
8” O.C.
8” O.C.
N/A
8” O.C.
Single Hole
4” O.C.
N/A
Single Hole
18”
6 1/2”
3 1/2”
N/A
15”
7 3/4”
2 1/2”
8”
N/A
34”
5”
1 3/8”
5”
N/A
5”
21”
9”
6”
N/A
34”
8” O.C.
8” O.C.
4” O.C.
N/A
8” O.C.
MODEL #
K-00
K-06
K-1
K-11
K-59
K-69
K-101
K-105
K-111
K-112
K-116
K-117
K-119
K-121
K-123
K-170
K-175
K-240 SERVICE FAUCET
9.6 GPM/36.3 LPM
3/4” HOSE END SPOUT
C
On Center
Dimensions
6' Cord. INPUT: 100-240VAC 47-6Hz. < 1 Amp Draw. UL LISTED
K-211
K-240
K-316
K-400
DTA-53
Heavy Duty Extra Long Spout Faucet
Service Faucet
Wrist Handle Gooseneck Faucet
Hands Free Wand
Heavy Duty Pre-Rinse Faucet
N/A = Not Applicable To Faucet
G-2a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JULY 2009
STAINLESS STEEL
HINGED DOOR STYLE
ENCLOSED BASE WORK TABLES
Item #:
Qty #:
Model #:
Flat Top
Project #:
24” WIDE
Length
1 1/2” Backsplash
36”
48”
60”
72”
84”
96”
108”
120”
144”
FLAT TOP
HB-SS-243
HB-SS-244
HB-SS-245
HB-SS-246
HB-SS-247
HB-SS-248
HB-SS-249
HB-SS-2410
HB-SS-2412
1 1/2” SPLASH
5” SPLASH
# of
Doors
HF-SS-243
HF-SS-244
HF-SS-245
HF-SS-246
HF-SS-247
HF-SS-248
HF-SS-249
HF-SS-2410
HF-SS-2412
HK-SS-243
HK-SS-244
HK-SS-245
HK-SS-246
HK-SS-247
HK-SS-248
HK-SS-249
HK-SS-2410
HK-SS-2412
2
2
2
4
4
4
4
4
6
Wt.
230 lbs.
270 lbs.
310 lbs.
355 lbs.
395 lbs.
445 lbs.
495 lbs.
535 lbs.
615 lbs.
30” WIDE
5” Backsplash
Length
FEATURES:
FLAT TOP is furnished with a 1 5/8” sanitary rolled rim on the front
and 1 5/8” square bend edges on the 2 sides and rear.
1 1/2” SPLASH is furnished with a 1 5/8” sanitary rolled rim on the
front side and 1 5/8” square bend edges on the 2 sides and a 1
1/2” splash of single metal thickness on the rear side.
5” SPLASH is furnished with a 1 5/8” sanitary rolled rim on the front
side and 1 5/8” square bend edges on the 2 sides and a 5” splash
with a 1” return on the rear side.
HINGED DOORS are constructed as double panel doors with
recessed inner panels for extra rigidity.
36”
48”
60”
72”
84”
96”
108”
120”
144”
FLAT TOP
HB-SS-303
HB-SS-304
HB-SS-305
HB-SS-306
HB-SS-307
HB-SS-308
HB-SS-309
HB-SS-3010
HB-SS-3012
1 1/2” SPLASH
5” SPLASH
# of
Doors
HF-SS-303
HF-SS-304
HF-SS-305
HF-SS-306
HF-SS-307
HF-SS-308
HF-SS-309
HF-SS-3010
HF-SS-3012
HK-SS-303
HK-SS-304
HK-SS-305
HK-SS-306
HK-SS-307
HK-SS-308
HK-SS-309
HK-SS-3010
HK-SS-3012
2
2
2
4
4
4
4
4
6
MATERIAL:
TOP is 14 gauge stainless steel type “304” series with galvanized
understructure.
BODY is 18 gauge stainless steel type “430” series.
LEGS are 1 5/8” diameter tubular stainless steel with stainless steel
gussets and 1” adjustable stainless steel bullet feet.
260 lbs.
295 lbs.
335 lbs.
375 lbs.
415 lbs.
460 lbs.
505 lbs.
550 lbs.
635 lbs.
36” WIDE
CONSTRUCTION:
All TIG welded. Exposed areas finished to match adjacent surfaces.
Entire Top is mechanically polished to a satin finish and is sound
deadened.
Hat section secured to Top reinforces and maintains level working
surface.
UNIT-BODY DESIGN sides, back and fixed mid shelf are welded to
form a single rigid structure.
Gussets welded to support hat sections.
Wt.
Length
36”
48”
60”
72”
84”
96”
108”
120”
144”
FLAT TOP
HB-SS-363
HB-SS-364
HB-SS-365
HB-SS-366
HB-SS-367
HB-SS-368
HB-SS-369
HB-SS-3610
HB-SS-3612
1 1/2” SPLASH
5” SPLASH
# of
Doors
HF-SS-363
HF-SS-364
HF-SS-365
HF-SS-366
HF-SS-367
HF-SS-368
HF-SS-369
HF-SS-3610
HF-SS-3612
HK-SS-363
HK-SS-364
HK-SS-365
HK-SS-366
HK-SS-367
HK-SS-368
HK-SS-369
HK-SS-3610
HK-SS-3612
2
2
2
4
4
4
4
4
6
Wt.
290 lbs.
330 lbs.
370 lbs.
415 lbs.
455 lbs.
500 lbs.
555 lbs.
615 lbs.
685 lbs.
Mid Shelves Are Available.
To Add a Fixed Mid Shelf, Add “M” After each Model Number.
Upgrade to Adjustable Mid Shelf. Add TA-116.
Customer Service Available To Assist You
1-800-645-3166
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
N-1
DETAILS and SPECIFICATIONS
TOL ± .500”
HB-Series
Flat Top
HF-Series
1 1/2” Rear Splash
HK-Series
ALL DIMENSIONS ARE TYPICAL
Units 7’ and larger are furnished with 6 legs.
5” Rear Splash
1 1/2"
OPTIONAL MID SHELF DETAILS
10 3/4"
2"
35 1/2"
13 1/4"
2"
7"
N-1a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, AUGUST 2009
STAINLESS STEEL
REGALINE SINKS
Two Compartment - Two Drainboards
Item #:
Qty #:
Model #:
Project #:
“940” Series
shown
Spec-Line:
Standard:
Super Saver:
FEATURES:
Tile edge for ease of installation.
One piece Deep Drawn sink bowls with integral
drainboards with splash.
Featuring the single bowl unit design.
All sink bowls have a large liberal 3” radius.
Placement of the welded leg assembly ensures stability and
furnishes direct support of the column load requirement for
the entire sink unit.
“940” series is supplied with front and rear cross brace.
MATERIAL:
940 Series: 14 gauge type 304 stainless steel.
930 Series: 16 gauge type 304 stainless steel.
900 Series: 18 gauge type 304 stainless steel.
LEGS: • 1 5/8” diameter tubular stainless steel.
• Stainless steel gussets & channels.
• Stainless Steel 1” adjustable bullet feet.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to
a satin finish.
Gussets welded to a die-embossed reinforcing channel.
YES! It's SeaM ess!
SPEC-LINE 940 Series
BOWL SIZE
16 x 20
(406 x 508)
20 x 20
(508 x 508)
O.A. LENGTH
DRBD. SIZE
(inches) (mm) (inches) (mm)
72”
1854
18”
457
85”
2159
24”
610
109”
2769
*36”
914
81”
2057
18”
457
93”
2362
24”
610
117”
2975
*36”
914
77”
1937
18”
457
89”
2242
24”
610
113”
2877
*36”
914
24 x 24
101”
2565
24”
610
(610 x 610)
125”
3175
*36”
914
81”
2057
18”
457
18 x 24
(457 x 610)
20 x 28
(508 x 711)
93”
2362
24”
610
117”
2972
*36”
914
* Regalines with 36” Drainboards are Supplied
with Two Sets of Legs for Support.
940 Series - 11” High Splash.
930 Series - 8” Splash.
900 Series - 8” Splash.
STANDARD 930 Series
SUPER SAVER 900 Series
14 Ga. 304 S/S
16 Ga. 304 S/S
18 Ga. 304 S/S
14”Water Level
12”Water Level
12”Water Level
MODEL #
94-2-36-18RL
94-2-36-24RL
94-2-36-36RL
Approx. Wt.
(lbs.)
141
MODEL #
93-2-36-18RL
93-2-36-24RL
93-2-36-36RL
156
212
94-22-40-18RL
94-22-40-24RL
94-22-40-36RL
176
94-62-36-18RL
94-62-36-24RL
94-62-36-36RL
247
94-42-48-24RL
94-42-48-36RL
339
94-82-40-18RL
94-82-40-24RL
94-82-40-36RL
251
220
273
277
341
391
294
333
14” Water Level
17” Flood Level
Customer Service Available To Assist You
Approx. Wt.
(lbs.)
118
130
169
93-22-40-18RL
93-22-40-24RL
93-22-40-36RL
147
93-62-36-18RL
93-62-36-24RL
93-62-36-36RL
206
93-42-48-24RL
93-42-48-36RL
295
93-82-40-18RL
93-82-40-24RL
93-82-40-36RL
219
184
237
241
297
339
253
287
12” Water Level
15” Flood Level
1-800-645-3166
Approx. Wt.
(lbs.)
Cubic
Feet
9-2-36-18RL
9-2-36-24RL
9-2-36-36RL
100
40
110
46
144
58
9-22-40-18RL
9-22-40-24RL
9-22-40-36RL
125
44
162
50
215
72
9-62-36-18RL
9-62-36-24RL
9-62-36-36RL
181
50
226
58
271
96
9-42-48-24RL
9-42-48-36RL
259
65
314
96
9-82-40-18RL
9-82-40-24RL
9-82-40-36RL
194
64
228
73
261
12” Water Level
15” Flood Level
96
MODEL #
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
C-3
DIMENSIONS and SPECIFICATIONS
TOL Overall: ± .500”
Interior: ± .250”
ALL DIMENSIONS ARE TYPICAL
B
Overall
Length
D
A
Drainboard
Size
Front
940 Series Cross Bracing
DESCRIPTION
BOWL
(SIZE)
Overall
Length
16x20
20x20
18x24
24x24
20x28
73”
85”
109”
81”
93”
117”
77”
89”
113”
101”
125”
81”
93”
117”
DRBD
(SIZE)
18”
24”
*36”
18”
24”
*36”
18”
24”
*36”
24”
*36”
18”
24”
*36”
940 SERIES
Recommended
Use
A
B
DISH
SINKS
20”
DISH &
POT SINKS
C
D
V
W
X
Y
900 & 930 SERIES
Z
V
W
X
Y
Z
16” 13 5/8” 27” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
20”
20” 13 5/8” 27” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
POT & PAN
SINKS
24”
18” 15 5/8” 31” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
POT SINKS
24”
24” 15 5/8” 31” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
PAN SINKS
28”
20” 17 5/8” 35” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
* Regalines with 36” Drainboards are Supplied with Two Sets of Legs for Support.
SECTION
PLUMBING ROUGH-IN
MECHANICAL:
• Supply is 1/2” IPS hot & cold.
• Faucet holes on 8” centers.
• Faucets are not included
(see accessories).
• Waste drains are 1 1/2” IPS
S/S basket type, located in
center of sink bowl, and are
included.
C-3a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, DECEMBER 2006
STAINLESS STEEL
WALL SHELF WITH
CHECK MINDER
Item #:
Qty #:
Model #:
Project #:
FEATURES:
Furnished with a 1-1/2” sanitary rolled rim with a
1-1/2” turn-up at rear. Ends are turned down square.
Brackets can be positioned to accomodate wall studs.
For Check Minder Provision
on any shelf use TA-77.
Model
Length
WS-12-36CM
WS-12-48CM
WS-12-60CM
WS-12-72CM
WS-12-96CM
12”
12”
12”
12”
12”
x
x
x
x
x
36”
48”
60”
72”
96”
96” unit furnished with 3 brackets.
Check Minder holds checks with ease. Floating ball mechanism
quickly grabs checks and holds them in place.
Wt.
15 lbs.
19 lbs.
21 lbs.
25 lbs.
32 lbs.
CONSTRUCTION:
All TIG welded.
Exposed surfaces polished to a satin finish.
MATERIAL:
18 gauge type “430” stainless steel.
DETAILS and SPECIFICATIONS
TOL ± .500”
ALL DIMENSIONS ARE TYPICAL
WALL SHELF WITH CHECK MINDER
Length
12"
10"
FEATURES:
ALUMINUM
CHECK MINDER
Check Minder holds checks with ease.
Floating ball mechanism quickly grabs checks
and holds them in place.
Mounts to existing wall or shelf.
MATERIAL:
Extruded Anodized aluminum.
Model
Length
CM-24
CM-36
CM-48
Customer Service Available To Assist You
1-800-645-3166
24”
36”
48”
Wt.
1.5 lbs.
2.25 lbs.
3 lbs.
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice.
NEVADA
Fax: (775) 972-1578
© ADVANCE TABCO, MAY 2009
L-6
SPLASH MOUNTED
FAUCETS
12” Swing Spout
14” Swing Spout
K-1
K-11
K-101
K-105
HEAVY DUTY
14” Swing Spout (T&S)
HEAVY DUTY
12” Swing Spout (T&S)
K-112
K-111
12” Swing Spout
Add-A-Faucet
HEAVY DUTY
Pre-Rinse
Faucet (T&S)
K-69
K-59
HEAVY DUTY
14” Swing Spout
8” Swing Spout
HEAVY DUTY
Gooseneck
3-1/2” Gooseneck
16” Swing Spout
Splash Mount Swivel
Gooseneck
K-116
K-114
Replacement Spray
Head & Handle
K-117
6” Extended Spout
K-121
K-119
Eye Wash Attachment
AC/DC powered
Hands-Free
Gooseneck
HEAVY DUTY
Extra Long Faucet
AC & Battery
Operated!
K-123
Service Faucet
K-175
K-170
K-211
Hands-Free Wand
Wrist handle Gooseneck
Wrist Handles
Only
HEAVY DUTY
Pre-Rinse
Faucet
DTA-53
K-240
K-316
K-316-LU
K-114
Replacement Spray
Head & Handle
K-400
Faucet Wall
Mounting Bracket
Repair Kit For
K-1, K-11, K-101,
K-112, K-119
& K-211
Faucet Mounting Kit
K-1, K-11, K-101, K-105,
K-112, K-119
& K-211
Repair Kit can only be used on
faucets purchased after 12/03
K-00
K-06
K-30
Customer Service Available To Assist You
1-800-645-3166
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
G-2
DIMENSIONS and SPECIFICATIONS
TOL ± .125”
ALL DIMENSIONS ARE TYPICAL
SPLASH MOUNTED FAUCETS
Gooseneck Faucet
Swing Spout Faucet
C
L
D
A
B
CL
C
D
A
B
C
C
L
CL
C
L
Standard Faucet conforms to NSF 61 Standard 9. An optional
faucet upgrade is required for compliance to AB 1953 Standards.
K-170 - Eye Wash Detail
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
ALL FAUCET AERATORS
CONFORM TO
ASTM.A112.18.1M
2.0 GPM/7.56 LPM
THREAD: 55/64 - 27 FEMALE
D
Description
A
B
LENGTH
HEIGHT
Repair Kit For K-1, K-11, K-101, K-119 & 211
Faucet Mt. Kit for K-1, K-11, K-101, K-119 & K-211
12” Swing Spout Faucet
14” Swing Spout Faucet
3 1/2” Gooseneck Faucet
Heavy Duty Gooseneck Faucet
8” Swing Spout Faucet
Heavy Duty 14” Swing Spout Faucet
Heavy Duty 14” Swing Spout (T&S) Faucet
Heavy Duty 12” Swing Spout Faucet
Heavy Duty Pre-Rinse (T&S) Faucet
Add-A-Faucet with 12” Spout Faucet
16” Swing Spout Faucet
Splash Mount Swivel Gooseneck Faucet
6” Extended Spout Faucet
Eye Wash Attachment (See Above Detail)
Hands Free AC/DC Operated Faucet
N/A
N/A
12”
14”
3 1/2”
3”
8”
14”
14”
12”
13”
12”
18”
3 1/2”
6”
N/A
4 1/2”
N/A
N/A
5”
5 1/2”
8”
5”
4 1/4”
5”
8 1/4”
5”
34 1/2”
N/A
16”
8”
5”
N/A
7”
N/A
N/A
2 1/2”
3”
5”
2 3/4”
2 1/4”
3”
5 1/2”
3”
13 1/2”
N/A
4”
5 1/2”
2 1/2”
N/A
3 3/4”
N/A
N/A
14”
16”
6”
5 1/2”
10”
16”
16 1/2”
14”
15 3/8”
N/A
18 1/2”
5 3/4”
8”
N/A
5 1/2”
N/A
N/A
8” O.C.
8” O.C.
4” O.C.
4” O.C.
8” O.C.
8” O.C.
8” O.C.
8” O.C.
8” O.C.
N/A
8” O.C.
Single Hole
4” O.C.
N/A
Single Hole
18”
6 1/2”
3 1/2”
N/A
15”
7 3/4”
2 1/2”
8”
N/A
34”
5”
1 3/8”
5”
N/A
5”
21”
9”
6”
N/A
34”
8” O.C.
8” O.C.
4” O.C.
N/A
8” O.C.
MODEL #
K-00
K-06
K-1
K-11
K-59
K-69
K-101
K-105
K-111
K-112
K-116
K-117
K-119
K-121
K-123
K-170
K-175
K-240 SERVICE FAUCET
9.6 GPM/36.3 LPM
3/4” HOSE END SPOUT
C
On Center
Dimensions
6' Cord. INPUT: 100-240VAC 47-6Hz. < 1 Amp Draw. UL LISTED
K-211
K-240
K-316
K-400
DTA-53
Heavy Duty Extra Long Spout Faucet
Service Faucet
Wrist Handle Gooseneck Faucet
Hands Free Wand
Heavy Duty Pre-Rinse Faucet
N/A = Not Applicable To Faucet
G-2a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JULY 2009
STAINLESS STEEL
HINGED DOOR STYLE
ENCLOSED BASE WORK TABLES
Item #:
Qty #:
Model #:
Flat Top
Project #:
24” WIDE
Length
1 1/2” Backsplash
36”
48”
60”
72”
84”
96”
108”
120”
144”
FLAT TOP
HB-SS-243
HB-SS-244
HB-SS-245
HB-SS-246
HB-SS-247
HB-SS-248
HB-SS-249
HB-SS-2410
HB-SS-2412
1 1/2” SPLASH
5” SPLASH
# of
Doors
HF-SS-243
HF-SS-244
HF-SS-245
HF-SS-246
HF-SS-247
HF-SS-248
HF-SS-249
HF-SS-2410
HF-SS-2412
HK-SS-243
HK-SS-244
HK-SS-245
HK-SS-246
HK-SS-247
HK-SS-248
HK-SS-249
HK-SS-2410
HK-SS-2412
2
2
2
4
4
4
4
4
6
Wt.
230 lbs.
270 lbs.
310 lbs.
355 lbs.
395 lbs.
445 lbs.
495 lbs.
535 lbs.
615 lbs.
30” WIDE
5” Backsplash
Length
FEATURES:
FLAT TOP is furnished with a 1 5/8” sanitary rolled rim on the front
and 1 5/8” square bend edges on the 2 sides and rear.
1 1/2” SPLASH is furnished with a 1 5/8” sanitary rolled rim on the
front side and 1 5/8” square bend edges on the 2 sides and a 1
1/2” splash of single metal thickness on the rear side.
5” SPLASH is furnished with a 1 5/8” sanitary rolled rim on the front
side and 1 5/8” square bend edges on the 2 sides and a 5” splash
with a 1” return on the rear side.
HINGED DOORS are constructed as double panel doors with
recessed inner panels for extra rigidity.
36”
48”
60”
72”
84”
96”
108”
120”
144”
FLAT TOP
HB-SS-303
HB-SS-304
HB-SS-305
HB-SS-306
HB-SS-307
HB-SS-308
HB-SS-309
HB-SS-3010
HB-SS-3012
1 1/2” SPLASH
5” SPLASH
# of
Doors
HF-SS-303
HF-SS-304
HF-SS-305
HF-SS-306
HF-SS-307
HF-SS-308
HF-SS-309
HF-SS-3010
HF-SS-3012
HK-SS-303
HK-SS-304
HK-SS-305
HK-SS-306
HK-SS-307
HK-SS-308
HK-SS-309
HK-SS-3010
HK-SS-3012
2
2
2
4
4
4
4
4
6
MATERIAL:
TOP is 14 gauge stainless steel type “304” series with galvanized
understructure.
BODY is 18 gauge stainless steel type “430” series.
LEGS are 1 5/8” diameter tubular stainless steel with stainless steel
gussets and 1” adjustable stainless steel bullet feet.
260 lbs.
295 lbs.
335 lbs.
375 lbs.
415 lbs.
460 lbs.
505 lbs.
550 lbs.
635 lbs.
36” WIDE
CONSTRUCTION:
All TIG welded. Exposed areas finished to match adjacent surfaces.
Entire Top is mechanically polished to a satin finish and is sound
deadened.
Hat section secured to Top reinforces and maintains level working
surface.
UNIT-BODY DESIGN sides, back and fixed mid shelf are welded to
form a single rigid structure.
Gussets welded to support hat sections.
Wt.
Length
36”
48”
60”
72”
84”
96”
108”
120”
144”
FLAT TOP
HB-SS-363
HB-SS-364
HB-SS-365
HB-SS-366
HB-SS-367
HB-SS-368
HB-SS-369
HB-SS-3610
HB-SS-3612
1 1/2” SPLASH
5” SPLASH
# of
Doors
HF-SS-363
HF-SS-364
HF-SS-365
HF-SS-366
HF-SS-367
HF-SS-368
HF-SS-369
HF-SS-3610
HF-SS-3612
HK-SS-363
HK-SS-364
HK-SS-365
HK-SS-366
HK-SS-367
HK-SS-368
HK-SS-369
HK-SS-3610
HK-SS-3612
2
2
2
4
4
4
4
4
6
Wt.
290 lbs.
330 lbs.
370 lbs.
415 lbs.
455 lbs.
500 lbs.
555 lbs.
615 lbs.
685 lbs.
Mid Shelves Are Available.
To Add a Fixed Mid Shelf, Add “M” After each Model Number.
Upgrade to Adjustable Mid Shelf. Add TA-116.
Customer Service Available To Assist You
1-800-645-3166
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
N-1
DETAILS and SPECIFICATIONS
TOL ± .500”
HB-Series
Flat Top
HF-Series
1 1/2” Rear Splash
HK-Series
ALL DIMENSIONS ARE TYPICAL
Units 7’ and larger are furnished with 6 legs.
5” Rear Splash
1 1/2"
OPTIONAL MID SHELF DETAILS
10 3/4"
2"
35 1/2"
13 1/4"
2"
7"
N-1a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, AUGUST 2009
STAINLESS STEEL
REGALINE SINKS
Two Compartment - Two Drainboards
Item #:
Qty #:
Model #:
Project #:
“940” Series
shown
Spec-Line:
Standard:
Super Saver:
FEATURES:
Tile edge for ease of installation.
One piece Deep Drawn sink bowls with integral
drainboards with splash.
Featuring the single bowl unit design.
All sink bowls have a large liberal 3” radius.
Placement of the welded leg assembly ensures stability and
furnishes direct support of the column load requirement for
the entire sink unit.
“940” series is supplied with front and rear cross brace.
MATERIAL:
940 Series: 14 gauge type 304 stainless steel.
930 Series: 16 gauge type 304 stainless steel.
900 Series: 18 gauge type 304 stainless steel.
LEGS: • 1 5/8” diameter tubular stainless steel.
• Stainless steel gussets & channels.
• Stainless Steel 1” adjustable bullet feet.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to
a satin finish.
Gussets welded to a die-embossed reinforcing channel.
YES! It's SeaM ess!
SPEC-LINE 940 Series
BOWL SIZE
16 x 20
(406 x 508)
20 x 20
(508 x 508)
O.A. LENGTH
DRBD. SIZE
(inches) (mm) (inches) (mm)
72”
1854
18”
457
85”
2159
24”
610
109”
2769
*36”
914
81”
2057
18”
457
93”
2362
24”
610
117”
2975
*36”
914
77”
1937
18”
457
89”
2242
24”
610
113”
2877
*36”
914
24 x 24
101”
2565
24”
610
(610 x 610)
125”
3175
*36”
914
81”
2057
18”
457
18 x 24
(457 x 610)
20 x 28
(508 x 711)
93”
2362
24”
610
117”
2972
*36”
914
* Regalines with 36” Drainboards are Supplied
with Two Sets of Legs for Support.
940 Series - 11” High Splash.
930 Series - 8” Splash.
900 Series - 8” Splash.
STANDARD 930 Series
SUPER SAVER 900 Series
14 Ga. 304 S/S
16 Ga. 304 S/S
18 Ga. 304 S/S
14”Water Level
12”Water Level
12”Water Level
MODEL #
94-2-36-18RL
94-2-36-24RL
94-2-36-36RL
Approx. Wt.
(lbs.)
141
MODEL #
93-2-36-18RL
93-2-36-24RL
93-2-36-36RL
156
212
94-22-40-18RL
94-22-40-24RL
94-22-40-36RL
176
94-62-36-18RL
94-62-36-24RL
94-62-36-36RL
247
94-42-48-24RL
94-42-48-36RL
339
94-82-40-18RL
94-82-40-24RL
94-82-40-36RL
251
220
273
277
341
391
294
333
14” Water Level
17” Flood Level
Customer Service Available To Assist You
Approx. Wt.
(lbs.)
118
130
169
93-22-40-18RL
93-22-40-24RL
93-22-40-36RL
147
93-62-36-18RL
93-62-36-24RL
93-62-36-36RL
206
93-42-48-24RL
93-42-48-36RL
295
93-82-40-18RL
93-82-40-24RL
93-82-40-36RL
219
184
237
241
297
339
253
287
12” Water Level
15” Flood Level
1-800-645-3166
Approx. Wt.
(lbs.)
Cubic
Feet
9-2-36-18RL
9-2-36-24RL
9-2-36-36RL
100
40
110
46
144
58
9-22-40-18RL
9-22-40-24RL
9-22-40-36RL
125
44
162
50
215
72
9-62-36-18RL
9-62-36-24RL
9-62-36-36RL
181
50
226
58
271
96
9-42-48-24RL
9-42-48-36RL
259
65
314
96
9-82-40-18RL
9-82-40-24RL
9-82-40-36RL
194
64
228
73
261
12” Water Level
15” Flood Level
96
MODEL #
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
C-3
DIMENSIONS and SPECIFICATIONS
TOL Overall: ± .500”
Interior: ± .250”
ALL DIMENSIONS ARE TYPICAL
B
Overall
Length
D
A
Drainboard
Size
Front
940 Series Cross Bracing
DESCRIPTION
BOWL
(SIZE)
Overall
Length
16x20
20x20
18x24
24x24
20x28
73”
85”
109”
81”
93”
117”
77”
89”
113”
101”
125”
81”
93”
117”
DRBD
(SIZE)
18”
24”
*36”
18”
24”
*36”
18”
24”
*36”
24”
*36”
18”
24”
*36”
940 SERIES
Recommended
Use
A
B
DISH
SINKS
20”
DISH &
POT SINKS
C
D
V
W
X
Y
900 & 930 SERIES
Z
V
W
X
Y
Z
16” 13 5/8” 27” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
20”
20” 13 5/8” 27” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
POT & PAN
SINKS
24”
18” 15 5/8” 31” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
POT SINKS
24”
24” 15 5/8” 31” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
PAN SINKS
28”
20” 17 5/8” 35” 38” 11” 14” 20” 45” 38”
8”
12” 22” 42”
* Regalines with 36” Drainboards are Supplied with Two Sets of Legs for Support.
SECTION
PLUMBING ROUGH-IN
MECHANICAL:
• Supply is 1/2” IPS hot & cold.
• Faucet holes on 8” centers.
• Faucets are not included
(see accessories).
• Waste drains are 1 1/2” IPS
S/S basket type, located in
center of sink bowl, and are
included.
C-3a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, DECEMBER 2006
STAINLESS STEEL
WALL SHELF WITH
CHECK MINDER
Item #:
Qty #:
Model #:
Project #:
FEATURES:
Furnished with a 1-1/2” sanitary rolled rim with a
1-1/2” turn-up at rear. Ends are turned down square.
Brackets can be positioned to accomodate wall studs.
For Check Minder Provision
on any shelf use TA-77.
Model
Length
WS-12-36CM
WS-12-48CM
WS-12-60CM
WS-12-72CM
WS-12-96CM
12”
12”
12”
12”
12”
x
x
x
x
x
36”
48”
60”
72”
96”
96” unit furnished with 3 brackets.
Check Minder holds checks with ease. Floating ball mechanism
quickly grabs checks and holds them in place.
Wt.
15 lbs.
19 lbs.
21 lbs.
25 lbs.
32 lbs.
CONSTRUCTION:
All TIG welded.
Exposed surfaces polished to a satin finish.
MATERIAL:
18 gauge type “430” stainless steel.
DETAILS and SPECIFICATIONS
TOL ± .500”
ALL DIMENSIONS ARE TYPICAL
WALL SHELF WITH CHECK MINDER
Length
12"
10"
FEATURES:
ALUMINUM
CHECK MINDER
Check Minder holds checks with ease.
Floating ball mechanism quickly grabs checks
and holds them in place.
Mounts to existing wall or shelf.
MATERIAL:
Extruded Anodized aluminum.
Model
Length
CM-24
CM-36
CM-48
Customer Service Available To Assist You
1-800-645-3166
24”
36”
48”
Wt.
1.5 lbs.
2.25 lbs.
3 lbs.
8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice.
NEVADA
Fax: (775) 972-1578
© ADVANCE TABCO, MAY 2009
L-6
TRUE FOOD SERVICE
EQUIPMENT, INC.
2001 East Terra Lane • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Model:
T-35
AIA #
Project Name:
Location:
Item #:
SIS #
Qty:
Model #:
T-Series:
Reach-In Solid Swing Door Refrigerator
T-35
True’s solid door reach-in’s are
designed with enduring quality that
protects your long term investment.
Designed using the highest quality
materials and components to
provide the user with colder product
temperatures, lower utility costs,
exceptional food safety and the
best value in today’s food service
marketplace.
Oversized, factory balanced,
refrigeration system holds 33°F to
38°F (.5°C to 3.3°C) for the best in food
preservation.
Stainless steel solid doors and front.
The finest stainless available with
higher tensile strength for fewer dents
and scratches.
Adjustable, heavy duty PVC coated
shelves.
Positive seal self-closing doors.
Lifetime guaranteed door hinges and
torsion type closure system.
Bottom mounted units feature:
”No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest, most
grease free area of kitchen.
Easily accessible condenser coil for
cleaning.
Rough-In Data
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
(mm)
Model
T-35
Doors
Shelves
L
D
H*
HP
Voltage
2
6
391/2
291/2
783/8
1/3
115/60/1
1004
750
1991
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
Approvals:
Printed in U.S.A.
1/3
230-240/50/1
Cord
Length
NEMA (total ft.)
Amps Config. (total m)
7.3
2.6
5-15P
▲
9
2.74
Crated
Weight
(lbs.)
(kg)
340
155
▲Plug type varies by country.
Available At:
T-Series:
Model:
Reach-In Solid Swing Door Refrigerator
T-35
Standard Features
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Extra large evaporator coil balanced with higher
horsepower compressor and large condenser;
maintains 33°F to 38°F (.5°C to 3.3°C) for the
best in food preservation.
• Sealed, cast iron, self-lubricating evaporator
fan motor(s) and larger fan blades give True
reach-in’s a more efficient low velocity, high
volume airflow design. This unique design
ensures faster temperature recovery and
shorter run times in the busiest of food service
environments.
• Bottom mounted condensing unit positioned
for easy maintenance. Compressor runs in
coolest and most grease free area of the kitchen.
Allows for storage area on top of unit.
CABINET CONSTRUCTION
• Exterior - Stainless steel front. Anodized quality
aluminum ends, back and top.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel floor
with coved corners.
• Insulation - entire cabinet structure and solid
MODEL FEATURES
• Exterior temperature display.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and ready
for final connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.
door are foamed-in-place using Ecomate. A high
density, polyurethane insulation that has zero
ozone depletion potential (ODP) and zero global
warming potential (GWP).
• Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
• Frame rail fitted with 4" (102 mm) diameter stem
castors - locks provided on front set.
DOORS
• Stainless steel exterior with white aluminum
liners to match cabinet interior. Doors extend
full width of cabinet shell. Door locks standard.
• Lifetime guaranteed recessed door handles.
Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
• Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gasket(s) of one piece
construction, removable without tools for ease
of cleaning.
SHELVING
• Six (6) adjustable, heavy duty PVC coated wire
shelves 17 1/2"L x 22 3/8"D (445 mm x 569 mm).
Four (4) chrome plated shelf clips included per
shelf.
• Shelf support pilasters made of same material as
cabinet interior; shelves are adjustable on 1/2" (13
mm) increments.
LIGHTING
• Incandescent interior lighting - safety shielded.
Lights activated by rocker switch mounted
above door(s).
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑❑ 230 - 240V / 50 Hz.
❑❑ 6" (153 mm) standard legs.
❑❑ 6" (153 mm) seismic/flanged legs.
❑❑ Additional shelves.
❑❑ Half door bun tray racks. Each holds up to
eleven 12"L x 20"D (305 mm x 508 mm) sheet
pans (sold separately).
❑❑ Full door bun tray racks. Each holds up to
twenty-two 12"L x 20"D (305 mm x 508 mm)
sheet pans (sold separately).
❑❑ Remote cabinets (condensing unit supplied
by others; system comes standard with 404A
expansion valve and requires R404A refrigerant).
Consult factory technical service department for
BTU information. All remote units must be hard
wired during installation.
Plan View
CUBIC FEET
35/991
* Based on ANSI/AHAM HRF-1-2004
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model
Elevation Right
Plan
3D
T-35
TFEY18E
TFEY04P
TFEY183
TFEY04S
Back
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
Item #
R E S T A U R A N T
C.S.I. Section 11420
R A N G E S
ENDURANCE™ SERIES
48” GAS RESTAURANT RANGE
OPEN BURNERS / GRIDDLES
G48S-6FT12
G48C-6FT12
G48B-6FT12
G48S-4FT24
G48C-4FT24
G48B-4FT24
G48S-2FT36
G48C-2FT36
G48B-2FT36
STANDARD FEATURES
■■ Fully MIG welded frame
■■ Stainless steel front, sides, backriser, lift-off high shelf
■■ 6” Stainless steel adjustable legs
■■ 32,000 BTU/hr open top burners with lift-off heads
■■ Individual pilot for each burner
■■ Heavy duty cast grates, easy lift-off 12” x 12 1/2” in front
and 12” x 14 1/2” in the rear
■■ Extra deep pull out crumb tray with welded corners
■■ 35,000 BTU/hr baker’s depth standard oven cavity. Full size
sheet pans fit side-to-side or front-to-back
■■ Oven thermostat adjusts from 250°F to 500°F
■■ Heavy duty cool touch oven door handle
Model G48S-4FT24
shown with optional casters
■■ Two oven racks and four rack positions
■■ 7/8” thick manual griddle. 4” wide front grease trough
■■ 35,000 BTU/hr Snorkler convection oven in place of standard
oven 26”d x 26 1/8”w x 13 7/8”h (115v - 1 phase blower motor
4 amp, 6’ cord and plug), includes three oven racks
■■ One year limited parts and labor warranty
SPECIFICATIONS
48” wide gas restaurant range, Vulcan Model No. G48S-4FT24.
Fully MIG welded aluminized steel frame for added durability.
Stainless steel front, sides, backriser, high shelf and 6” adjustable
legs. Extra deep crumb tray with welded corners. Four 32,000 BTU/
hr cast burners with lift-off burner heads. Individual pilot for each
burner. 7/8” thick x 24” wide manual griddle, 40,000 BTU/hr. Heavy
duty cast grates, easy lift-off 12” x 12 1/2” in the front and 12” x 14
1/2” in the back to better accommodate stock pots or large pans.
Grates have a built in aeration bowl for greater efficiency. Burner
knobs and oven handle are cool to the touch, high temperature
material. One oven: 35,000 BTU/hr standard bakers depth ovens
with porcelain oven bottom, sides and door panel, measures 26
1/2”d x 26 3/8”w x 14”h. Oven thermostat adjusts from 250°F to
500°F with low setting. Oven is supplied with two racks, two rack
guide sets, and four rack positions. Oven door is heavy duty with an
integrated door hinge/spring mechanism requiring no adjustment.
1” rear gas connection and pressure regulator. Total input 203,000
BTU/hr.
OPTIONAL FEATURES (Factory Installed)
Rapid clean system - stainless steel clean-out basin, quick
disconnect burners, gas shut-off valve
Front mounted gas shut-off valve turns off top burner pilots
6” stainless steel stub back
Reinforced high shelf for mounting salamander broiler
Hot top section in lieu of one open burner
Thermostatically controlled griddle (snap-action)
ACCESSORIES (Packaged & Sold Separately)
Extra oven rack
Extra rack guides (set of two)
Casters (set of six)
Flanged feet (set of six)
Reinforced high shelf for mounting salamander broiler
Exterior Dimensions:
35 3/8”d x 48”w x 58”h on 6” adjustable legs
a division of ITW Food Equipment Group LLC
P.O. Box 696 F-37380 (02/09)
■
Louisville, KY 40201 ■
Toll-free: 1-800-814-2028 ■
Local: 502-778-2791 ■
Quote & Order Fax: 1-800-444-0602
R E S T A U R A N T
R A N G E S
ENDURANCE™ SERIES
48” GAS RESTAURANT RANGE
OPEN BURNERS / GRIDDLES
INSTALLATION INSTRUCTIONS
1. A pressure regulator sized for this unit is included. Natural gas
5.0” W.C., propane gas 10.0” W.C.
2. Gas line connecting to range must be 1” or larger. If flexible
connectors are used, the inside diameter must be 1” or larger.
3. An adequate ventilation system is required for commercial
cooking equipment. Information may be obtained by writing to
the National Fire Protection Association, 1 Batterymarch Park,
Quincy, MA 02269, www.NFPA.org. When writing, refer to NFPA
No. 96.
4. These units are manufactured for installation in accordance with
ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may
be obtained from The American Gas Association, 400 N Capitol
St. NW, Washington, DC 20001, www.AGA.org.
TOP
CONFIGURATION
MODEL
NUMBER
5. Clearances
Combustible
Standard Oven Non-combustible Convection Oven Non-combustible
Rear 6”
0” Min. 4” Sides
10”
0”
0”
6. For proper combustion, install equipment on adjustable legs or
casters provided with unit.
7. For proper combustion, install equipment on adjustable legs or
casters provided with unit.
NOTE: In line with its policy to continually improve its product, Vulcan
reserves the right to change materials and specifications without
notice.
Specify type of gas when ordering.
Specify altitude when above 2,000 feet.
DESCRIPTION
TOTAL INPUT
BTU / HR
SHIPPING WEIGHT
LBS / KG
G48S-6FT12
6 Burners / 12” Griddle / 1 Standard Oven
247,000
708 / 322
G48C-6FT12
6 Burners / 12” Griddle / 1 Convection Oven
247,000
770 / 350
G48B-6FT12
6 Burners / 12” Griddle / 1 Storage Base
212,000
675 / 307
G48S-4FT24
4 Burners / 24” Griddle / 1 Standard Oven
203,000
720 / 327
G48C-4FT24
4 Burners / 24” Griddle / 1 Convection Oven
203,000
780 / 355
G48B-4FT24
4 Burners / 24” Griddle / 1 Storage Base
168,000
685 / 311
G48S-2FT36
2 Burners / 36” Griddle / 1 Standard Oven
159,000
750 / 341
G48C-2FT36
2 Burners / 36” Griddle / 1 Convection Oven
159,000
810 / 368
G48B-2FT36
2 Burners / 36” Griddle / 1 Storage Base
124,000
715 / 325
This appliance is manufactured for commercial use only and is not intended for home use.
a division of ITW Food Equipment Group LLC
P.O. Box 696 F-37380 (02/09)
■
Louisville, KY 40201 ■
Toll-free: 1-800-814-2028 ■
Local: 502-778-2791 ■
Quote & Order Fax: 1-800-444-0602
TRUE FOOD SERVICE
EQUIPMENT, INC.
2001 East Terra Lane • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Model:
T-35
AIA #
Project Name:
Location:
Item #:
SIS #
Qty:
Model #:
T-Series:
Reach-In Solid Swing Door Refrigerator
T-35
True’s solid door reach-in’s are
designed with enduring quality that
protects your long term investment.
Designed using the highest quality
materials and components to
provide the user with colder product
temperatures, lower utility costs,
exceptional food safety and the
best value in today’s food service
marketplace.
Oversized, factory balanced,
refrigeration system holds 33°F to
38°F (.5°C to 3.3°C) for the best in food
preservation.
Stainless steel solid doors and front.
The finest stainless available with
higher tensile strength for fewer dents
and scratches.
Adjustable, heavy duty PVC coated
shelves.
Positive seal self-closing doors.
Lifetime guaranteed door hinges and
torsion type closure system.
Bottom mounted units feature:
”No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest, most
grease free area of kitchen.
Easily accessible condenser coil for
cleaning.
Rough-In Data
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
(mm)
Model
T-35
Doors
Shelves
L
D
H*
HP
Voltage
2
6
391/2
291/2
783/8
1/3
115/60/1
1004
750
1991
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
Approvals:
Printed in U.S.A.
1/3
230-240/50/1
Cord
Length
NEMA (total ft.)
Amps Config. (total m)
7.3
2.6
5-15P
▲
9
2.74
Crated
Weight
(lbs.)
(kg)
340
155
▲Plug type varies by country.
Available At:
T-Series:
Model:
Reach-In Solid Swing Door Refrigerator
T-35
Standard Features
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Extra large evaporator coil balanced with higher
horsepower compressor and large condenser;
maintains 33°F to 38°F (.5°C to 3.3°C) for the
best in food preservation.
• Sealed, cast iron, self-lubricating evaporator
fan motor(s) and larger fan blades give True
reach-in’s a more efficient low velocity, high
volume airflow design. This unique design
ensures faster temperature recovery and
shorter run times in the busiest of food service
environments.
• Bottom mounted condensing unit positioned
for easy maintenance. Compressor runs in
coolest and most grease free area of the kitchen.
Allows for storage area on top of unit.
CABINET CONSTRUCTION
• Exterior - Stainless steel front. Anodized quality
aluminum ends, back and top.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel floor
with coved corners.
• Insulation - entire cabinet structure and solid
MODEL FEATURES
• Exterior temperature display.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and ready
for final connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.
door are foamed-in-place using Ecomate. A high
density, polyurethane insulation that has zero
ozone depletion potential (ODP) and zero global
warming potential (GWP).
• Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
• Frame rail fitted with 4" (102 mm) diameter stem
castors - locks provided on front set.
DOORS
• Stainless steel exterior with white aluminum
liners to match cabinet interior. Doors extend
full width of cabinet shell. Door locks standard.
• Lifetime guaranteed recessed door handles.
Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
• Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gasket(s) of one piece
construction, removable without tools for ease
of cleaning.
SHELVING
• Six (6) adjustable, heavy duty PVC coated wire
shelves 17 1/2"L x 22 3/8"D (445 mm x 569 mm).
Four (4) chrome plated shelf clips included per
shelf.
• Shelf support pilasters made of same material as
cabinet interior; shelves are adjustable on 1/2" (13
mm) increments.
LIGHTING
• Incandescent interior lighting - safety shielded.
Lights activated by rocker switch mounted
above door(s).
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑❑ 230 - 240V / 50 Hz.
❑❑ 6" (153 mm) standard legs.
❑❑ 6" (153 mm) seismic/flanged legs.
❑❑ Additional shelves.
❑❑ Half door bun tray racks. Each holds up to
eleven 12"L x 20"D (305 mm x 508 mm) sheet
pans (sold separately).
❑❑ Full door bun tray racks. Each holds up to
twenty-two 12"L x 20"D (305 mm x 508 mm)
sheet pans (sold separately).
❑❑ Remote cabinets (condensing unit supplied
by others; system comes standard with 404A
expansion valve and requires R404A refrigerant).
Consult factory technical service department for
BTU information. All remote units must be hard
wired during installation.
Plan View
CUBIC FEET
35/991
* Based on ANSI/AHAM HRF-1-2004
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model
Elevation Right
Plan
3D
T-35
TFEY18E
TFEY04P
TFEY183
TFEY04S
Back
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
Item #
R E S T A U R A N T
C.S.I. Section 11420
R A N G E S
ENDURANCE™ SERIES
48” GAS RESTAURANT RANGE
OPEN BURNERS / GRIDDLES
G48S-6FT12
G48C-6FT12
G48B-6FT12
G48S-4FT24
G48C-4FT24
G48B-4FT24
G48S-2FT36
G48C-2FT36
G48B-2FT36
STANDARD FEATURES
■■ Fully MIG welded frame
■■ Stainless steel front, sides, backriser, lift-off high shelf
■■ 6” Stainless steel adjustable legs
■■ 32,000 BTU/hr open top burners with lift-off heads
■■ Individual pilot for each burner
■■ Heavy duty cast grates, easy lift-off 12” x 12 1/2” in front
and 12” x 14 1/2” in the rear
■■ Extra deep pull out crumb tray with welded corners
■■ 35,000 BTU/hr baker’s depth standard oven cavity. Full size
sheet pans fit side-to-side or front-to-back
■■ Oven thermostat adjusts from 250°F to 500°F
■■ Heavy duty cool touch oven door handle
Model G48S-4FT24
shown with optional casters
■■ Two oven racks and four rack positions
■■ 7/8” thick manual griddle. 4” wide front grease trough
■■ 35,000 BTU/hr Snorkler convection oven in place of standard
oven 26”d x 26 1/8”w x 13 7/8”h (115v - 1 phase blower motor
4 amp, 6’ cord and plug), includes three oven racks
■■ One year limited parts and labor warranty
SPECIFICATIONS
48” wide gas restaurant range, Vulcan Model No. G48S-4FT24.
Fully MIG welded aluminized steel frame for added durability.
Stainless steel front, sides, backriser, high shelf and 6” adjustable
legs. Extra deep crumb tray with welded corners. Four 32,000 BTU/
hr cast burners with lift-off burner heads. Individual pilot for each
burner. 7/8” thick x 24” wide manual griddle, 40,000 BTU/hr. Heavy
duty cast grates, easy lift-off 12” x 12 1/2” in the front and 12” x 14
1/2” in the back to better accommodate stock pots or large pans.
Grates have a built in aeration bowl for greater efficiency. Burner
knobs and oven handle are cool to the touch, high temperature
material. One oven: 35,000 BTU/hr standard bakers depth ovens
with porcelain oven bottom, sides and door panel, measures 26
1/2”d x 26 3/8”w x 14”h. Oven thermostat adjusts from 250°F to
500°F with low setting. Oven is supplied with two racks, two rack
guide sets, and four rack positions. Oven door is heavy duty with an
integrated door hinge/spring mechanism requiring no adjustment.
1” rear gas connection and pressure regulator. Total input 203,000
BTU/hr.
OPTIONAL FEATURES (Factory Installed)
Rapid clean system - stainless steel clean-out basin, quick
disconnect burners, gas shut-off valve
Front mounted gas shut-off valve turns off top burner pilots
6” stainless steel stub back
Reinforced high shelf for mounting salamander broiler
Hot top section in lieu of one open burner
Thermostatically controlled griddle (snap-action)
ACCESSORIES (Packaged & Sold Separately)
Extra oven rack
Extra rack guides (set of two)
Casters (set of six)
Flanged feet (set of six)
Reinforced high shelf for mounting salamander broiler
Exterior Dimensions:
35 3/8”d x 48”w x 58”h on 6” adjustable legs
a division of ITW Food Equipment Group LLC
P.O. Box 696 F-37380 (02/09)
■
Louisville, KY 40201 ■
Toll-free: 1-800-814-2028 ■
Local: 502-778-2791 ■
Quote & Order Fax: 1-800-444-0602
R E S T A U R A N T
R A N G E S
ENDURANCE™ SERIES
48” GAS RESTAURANT RANGE
OPEN BURNERS / GRIDDLES
INSTALLATION INSTRUCTIONS
1. A pressure regulator sized for this unit is included. Natural gas
5.0” W.C., propane gas 10.0” W.C.
2. Gas line connecting to range must be 1” or larger. If flexible
connectors are used, the inside diameter must be 1” or larger.
3. An adequate ventilation system is required for commercial
cooking equipment. Information may be obtained by writing to
the National Fire Protection Association, 1 Batterymarch Park,
Quincy, MA 02269, www.NFPA.org. When writing, refer to NFPA
No. 96.
4. These units are manufactured for installation in accordance with
ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may
be obtained from The American Gas Association, 400 N Capitol
St. NW, Washington, DC 20001, www.AGA.org.
TOP
CONFIGURATION
MODEL
NUMBER
5. Clearances
Combustible
Standard Oven Non-combustible Convection Oven Non-combustible
Rear 6”
0” Min. 4” Sides
10”
0”
0”
6. For proper combustion, install equipment on adjustable legs or
casters provided with unit.
7. For proper combustion, install equipment on adjustable legs or
casters provided with unit.
NOTE: In line with its policy to continually improve its product, Vulcan
reserves the right to change materials and specifications without
notice.
Specify type of gas when ordering.
Specify altitude when above 2,000 feet.
DESCRIPTION
TOTAL INPUT
BTU / HR
SHIPPING WEIGHT
LBS / KG
G48S-6FT12
6 Burners / 12” Griddle / 1 Standard Oven
247,000
708 / 322
G48C-6FT12
6 Burners / 12” Griddle / 1 Convection Oven
247,000
770 / 350
G48B-6FT12
6 Burners / 12” Griddle / 1 Storage Base
212,000
675 / 307
G48S-4FT24
4 Burners / 24” Griddle / 1 Standard Oven
203,000
720 / 327
G48C-4FT24
4 Burners / 24” Griddle / 1 Convection Oven
203,000
780 / 355
G48B-4FT24
4 Burners / 24” Griddle / 1 Storage Base
168,000
685 / 311
G48S-2FT36
2 Burners / 36” Griddle / 1 Standard Oven
159,000
750 / 341
G48C-2FT36
2 Burners / 36” Griddle / 1 Convection Oven
159,000
810 / 368
G48B-2FT36
2 Burners / 36” Griddle / 1 Storage Base
124,000
715 / 325
This appliance is manufactured for commercial use only and is not intended for home use.
a division of ITW Food Equipment Group LLC
P.O. Box 696 F-37380 (02/09)
■
Louisville, KY 40201 ■
Toll-free: 1-800-814-2028 ■
Local: 502-778-2791 ■
Quote & Order Fax: 1-800-444-0602
Download PDF
Similar pages