Data Sheet
Cisco Industrial Ethernet 3000 Layer 2/Layer 3
Series Switches
Product Overview
The Cisco® Industrial Ethernet 3000 Series (IE 3000 Series) is a family of Layer 2 and Layer 3 switches that bring
Cisco’s leadership in switching to Industrial Ethernet applications with Innovative features, robust security, and
superior ease of use. The Cisco IE 3000 Series features:
●
Industrial design and compliance
●
Tools for easy deployment, management, and replacement
●
Network security based on open standards
●
Integration of IT and industrial automation networks
The Cisco IE 3000 Series is an ideal product for Industrial Ethernet applications, including factory automation,
energy and process control, and intelligent transportation systems (ITSs).
The Cisco IE 3000 offers:
●
Design for Industrial Ethernet applications, including extended environmental, shock/vibration, and surge
ratings; a complete set of power input options; convection cooling; and DIN-rail or 19” rack mounting
●
Support for Power over Ethernet (PoE) up to 15.4W per port
●
Support for Power over Ethernet Plus (PoE+) for the PoE+ capable devices up to 30W per port
●
Easy setup and management using the Cisco Device Manager web interface and supporting tools, including
Cisco Network Assistant (CNA) and Cisco Prime LMS 4.2
●
Easy switch replacement using removable memory, allowing the user to replace a switch without having
to reconfigure
●
High availability, guaranteed determinism, and reliable security using Cisco IOS® Software
●
Recommended software configurations for industrial applications that can be applied at the touch of
a button
●
Compliance to a wide range of Industrial Ethernet specifications covering industrial automation, ITS,
substation, railway, and other markets
●
Support for IEEE1588v2, a precision timing protocol with nanosecond-level precision for high-performance
applications
●
Improved ring resiliency with the support of Resilient Ethernet Protocol (REP)
●
Transparent IT integration with the support of Layer 3 routing protocols (IP Services)
●
PROFINET v2 certification, with PROFINET conformance class B compliance
●
ABB Industrial IT certification
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
This datasheet has been downloaded from http://www.digchip.com at this page
Page 1 of 12
Configurations
The Cisco IE 3000 Series software, based on Cisco IOS Software, is a rich suite of intelligent services, supporting
high availability, quality of service (QoS), and security features.
The Cisco IE 3000 Series includes the following products:
Table 1.
Cisco IE 3000 Switches
Description
Cisco IE-3000-4TC
Specification
● 4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one active port
either 10/100/1000 copper or SFP fiber
● Support up to two expansion modules with various combinations
● DC input range 18VDC-60VDC
● Layer 2 LAN Base Image
Cisco IE-3000-4TC-E
● Same as IE-3000-4TC with Layer 3 IP Services Image
Cisco IE-3000-8TC
● 8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one active port
either 10/100/1000 copper or SFP fiber
● Support up to two expansion modules with various combinations
● DC input range 18VDC-60VDC
● Layer 2 LAN Base Image
Cisco IE-3000-8TC-E
● Same as IE-3000-8TC with Layer 3 IP Services Image
Cisco IEM-3000-8TM=
● Expansion copper Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E
switches, eight 10/100 TX ports
Cisco IEM-3000-8FM=
● Expansion FX Fiber Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E
switches, eight 100 FX ports
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 12
Description
Specification
Cisco PWR-IE50W-AC=
● Expansion Power Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E
switches, supports input AC 100-240V/1.25A or Input DC 125-250V/1A, Output DC 24V/2.1A, DIN-Rail
Mount, compatible with PWR-IE3000-AC
Cisco PWR-IE50W-AC-IEC=
● Expansion Power Module for Cisco IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E
switches, supports Input AC 100-240V/1.25A 50-60Hz, Output DC 24V/2.1A, IEC Plug, DIN-Rail Mount
Cisco IEM-3000-4SM=
● Expansion SFP Module for IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches,
4 100MB SFP ports
● Minimum IOS release 15.0(2)EY
Cisco IEM-3000-8SM=
● Expansion SFP Module for IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches,
8 100MB SFP ports
● Minimum IOS release 15.0(2)EY
Cisco IEM-3000-4PC=
● Expansion PoE module for IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches,
support 4 ports 10/100 PoE/PoE+. External power source is required (44-57 VDC for PoE/ 50-57 VDC
for PoE+)
● Minimum IOS release 15.0(2)EY2
Cisco IEM-3000-4PC-4TC=
● Expansion PoE module for IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, and IE-3000-8TC-E switches,
support 4 ports 10/100 PoE/PoE+ and 4 ports non-PoE ports. External power source is required
(44-57 VDC for PoE/ 50-57 VDC for PoE+)
● Minimum IOS release 15.0(2)EY2
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 12
Description
Specification
Cisco PWR-IE65W-PC-AC=
● AC-DC Power Module for PoE solution, Input AC 100-240V/1.4A, 50-60Hz or Input DC 125-250V/1A.
Output 54VDC/1.2 A, DIN-Rail Mount
Cisco PWR-IE65W-PC-DC=
● DC-DC Power Module for PoE solution, Input DC 18-60 V/4.3A, Output DC 54V/1.2A, DIN-Rail Mount
Industrial Ethernet Applications
The new Cisco IE 3000 Series is an ideal product for a variety of Industrial Ethernet applications:
●
Industrial automation: The Cisco IE 3000 is designed to support a wide array of Industrial Ethernet
protocols for automation. The Cisco IE 3000 features a programmable logic controller (PLC) form-factor
design with extended environmental ratings, convection cooling, DIN-rail mounting, redundant 24VDC
power input, alarm relays, and surge/noise immunity. The Cisco IE 3000 software and configuration tools
allow for easy setup, optimized for Industrial Ethernet applications (for example, EtherNet/IP). Multicast
control, traffic prioritization, and security features are specified in default templates recommended for these
protocols.
●
ITS: The Cisco IE 3000 supports ITS and other applications for outdoor video and traffic or transportation
systems control. The switch supports compliance to NEMA TS-2, a variety of gigabit fiber uplinks, and
AC and DC power input options, while Cisco IOS Software supports critical ITS features, including virtual
LAN (VLAN), QoS, Internet Group Management Protocol (IGMP) snooping, and security access control
lists (ACLs).
●
Substations: The Cisco IE 3000 is fully compliant to substation automation specifications, including
IEC61850 and IEEE1613. The switch supports high-speed ring recovery; fiber access and uplink ports; AC,
DC, and a variety of power input options for the substation environments.
●
Other applications: The Cisco IE 3000 can be deployed in railway, military, Metro Ethernet, and other
applications requiring unique environmental, form factor, or power inputs in harsh environments.
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 12
Table 2 gives the features and benefits of the Cisco IE 3000 Series. Table 3 gives the hardware specifications, and
Table 4 gives the power specifications. Table 5 lists the management and standards support, and Table 6 provides
the safety and compliance information.
Table 2.
Features and Benefits of Cisco IE 3000 Series
Category
Designed for industrial
applications
Feature/Benefit
● Extended temperature, vibration, shock and surge, and noise immunity ratings comply to specifications for
automation, ITS, and substation environments
● Compact, PLC-style form factor is ideal for deployment in industrial environments
● DIN-rail, wall, and 19” rack mount options allow for deployments in a variety of control systems
● Variety of power input options covers a wide range of power requirements for Industrial Ethernet applications
● Up to 300 deployment configurations, supporting a range of access port densities, copper and fiber uplinks,
fiber access ports, and power input, deliver flexibility in deployment
● Support for SFP modules provides uplink connectivity supporting 100BASE-LX, 100BASE-FX, 1000BASE-SX,
1000BASE-LX, and 1000BASE-ZX options
● Alarm relay contacts can be used for an external alert system
Ease of deployment,
management, and
replacement
● Cisco Express Setup simplifies initial configuration with a web browser, eliminating the need for more complex
terminal emulation programs
● Cisco Smartports templates provide the option to apply a default global or interface-level macro with a
recommended configuration, allowing the user to easily set up the switch in a configuration optimized for the
specific application
● Smartports templates for EtherNet/IP provide an optimized setup for these Industrial Ethernet protocols at the
touch of a button
● Swappable Flash memory is ideal for quick and easy switch replacement. Memory can be moved from one
switch to another, so a switch can be replaced without the need to reconfigure software features
● The Cisco IE 3000 can be managed by PROFINET based management tools. The IE 3000 has PROFINET v2
certification, with PROFINET conformance class B compliance
● Simple Network Management Protocol (SNMP) (v1/v2/v3) support allows for management using traditional ITbased management tools, including CiscoWorks
● Device Manager allows web-based switch configurations
● DHCP port-based allocation retains the IP address on a per port basis and simplifies the end-host
replacement in an industrial setting
● HTTPS access
● Embedded Event Manager (EEM) provides real-time network event detection and on board automation
● Cisco Network Assistant (CNA) is a no-charge, Windows-based application that simplifies the administration of
networks of up to 250 users. It supports the Cisco IE 3000 and a wide range of Cisco Catalyst ® intelligent
switches. With CNA, users can manage Cisco Catalyst switches and launch the device managers of Cisco
integrated services routers and Cisco Aironet® WLAN access points. Configuration wizards need just a few
user inputs to automatically configure the switch to optimally handle different types of traffic: control, voice,
video, multicast, and high-priority data. For detailed CNA support information, please go to
http://www.cisco.com/en/US/products/ps5931/prod_release_notes_list.html
● Cisco Prime LMS support. For detailed information, please go to
http://www.cisco.com/en/US/products/ps11200/products_device_support_tables_list.html
Availability and scalability
● Virtual LANs (VLANs) allow for logical segmentation for a network for optimal use of bandwidth
● 802.1q trunking
● QoS classifies and prioritizes data, guaranteeing determinism for mission-critical data
● IGMPv3 snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive
traffic to only the requestors. An additional querier allows this operation in a Layer 2 only environment
● IGMP filtering provides multicast authentication by filtering out no subscribers and limits the number of
concurrent multicast streams available per port
● Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall
systems performance
● IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and loop-free networks
simplifies network configuration and improves fault tolerance
● EtherChannel LACP support for quick recovery and bandwidth utilization
● FlexLinks for fast recovery
● Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, failsafe routing topologies
● Resilient Ethernet Protocol, scalable up to 130 nodes with a very fast convergence, 50ms
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 12
Category
Security
Feature/Benefit
● IEEE 802.1x with VLAN assignment, guest VLAN, and voice VLAN allows dynamic port-based security,
providing user authentication
● Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports
● MAC address filtering prevents the forwarding of any type of packet with a matching MAC address
● Secure Shell (SSH) Protocol v2 and SNMPv3 provide network security by encrypting administrator traffic
during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special
cryptographic software image because of U.S. export restrictions
● TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users
from altering the configuration
● MAC address notification allows administrators to be notified of users added to or removed from the network
● Dynamic Host Configuration Protocol (DHCP) snooping allows administrators to help ensure consistent
mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP
binding database and to rate limit the amount of DHCP traffic that enters a switch port
● DHCP Interface Tracker (Option 82) augments a host IP address request with the switch port ID
● Port security secures the access to an access or 802.1q trunk port based on MAC address
● After a specific time frame, the aging feature removes the MAC address from the switch to allow another
device to connect to the same port
● Trusted Boundary provides the ability to trust the QoS priority settings if an IP phone is present and to disable
the trust setting if the IP phone is removed, thereby preventing a malicious user from overriding prioritization
policies in the network
● Up to 512 ACLs are supported, with two profiles: Security (384 Security ACL entries and 128 QoS policies)
and QoS (128 Security ACL entries and 384 QoS polices)
● Cisco standard and extended IP security router ACLs define security policies on routed interfaces for controlplane and data-plane traffic
● Dynamic ARP Inspection helps ensure user integrity by preventing malicious users from exploiting the
insecure nature of the ARP protocol
● DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses.
This feature is used by other primary security features to prevent a number of other attacks such as ARP
poisoning
● IP source guard prevents a malicious user from spoofing or taking over another user's IP address by creating
a binding table between client's IP and MAC address, port, and VLAN
● Support for private VLANs and SXP (SGT Exchange Protocol)
High-performance IP
routing
● Inter-VLAN IP routing for full Layer 3 routing between 2 or more VLANs
● Basic IP unicast routing protocols (static, Routing Information Protocol Version 1 [RIPv1], RIPv2 and RIPng)
● Advanced IP unicast routing protocols (Open Shortest Path First [OSPF], Interior Gateway Routing Protocol
[IGRP], Enhanced IGRP [EIGRP], Border Gateway Protocol Version 4 [BGPv4], and Intermediate System-toIntermediate System [IS-IS]) are supported for load balancing and constructing scalable LANs
● Protocol Independent Multicast (PIM) for IP multicast routing is supported, including PIM sparse mode (PIMSM), PIM dense mode (PIM-DM), and PIM sparse-dense mode
● Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing
● IPv6 routing (OSPFv6 and EIGRPv6) support in hardware for maximum performance
● Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing
protocol configured
● HSRP provides dynamic load balancing and failover for routed links; up to 32 HSRP links supported per unit
● Support for 1000 multicast groups
● VRF-Lite virtualization
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 12
Table 3.
Cisco IE 3000 Series Switch Hardware
Description
Performance
Specification
● Wire-speed switching, 16 Gbps switching fabric
● Forwarding rate based on 64-byte packets: 6.5 Mpps
● 128 MB DRAM
● 64 MB Compact Flash memory
● Configurable up to 8000 MAC addresses (Layer 2)
● Configurable up to 2000 MAC addresses (Layer 3)
● Configurable up to 256 IGMP multicast groups (Layer 2)
● Configurable up to 1000 IGMP groups and multicast routes (Layer 3)
● Configurable up to 3,000 unicast routes (Layer 3)
● Support jumbo frames up to 9018 bytes on Gigabit uplink port and mini-jumbo frame (system MTU) up to
1998 bytes on both 10/100 and 10/100/1000 ports
Connectors and cabling
● 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
● 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
● 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling
● 1000BASE-SX, -LX/LH, -ZX SFP-based ports: LC fiber connectors (single/multimode fiber)
● 100BASE-LX10, -FX: LC fiber connectors (single/multimode fiber)
Indicators
● Per-port status LED: Link integrity, disabled, activity, speed, full-duplex indications
● System-status LED: System, link status, link duplex, link speed, indications
Dimensions
● Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: 6.0” W x 5.8” H x 4.4” D (152mm W x 147mm H x 112mm D)
(H x W x D)
● Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: 6.0” W x 5.8” H x 4.4” D (152mm W x 147mm H x 112mm D)
● Cisco IEM-3000-8TM=: 3.5” W x 5.8” H x 4.4” D (89mm W x 147mm H x 112mm D)
● Cisco IEM-3000-8FM=: 3.5” W x 5.8” H x 4.4” D (89mm W x 147mm H x 112mm D)
● Cisco IEM-3000-4SM=: 3.5” W x 5.8” H x 4.4” D (89mm W x 147mm H x 112mm D)
● Cisco IEM-3000-8SM=: 3.5” W x 5.8” H x 4.4” D (89mm W x 147mm H x 112mm D)
● Cisco IEM-3000-4PC=: 3.5” W x 5.8” H x 4.4” D (89mm W x 147mm H x 112mm D)
● Cisco IEM-3000-4PC-4TC=: 3.5” W x 5.8” H x 4.4” D (89mm W x 147mm H x 112mm D)
● Cisco PWR-IE50W-AC=: 2.0” W x 5.8” H x 4.4” D (51mm W x 147mm H x 112mm D)
● Cisco PWR-IE50W-AC-IEC=: 2.0” W x 5.8” H x 4.4” D (51mm W x 147mm H x 112mm D)
● Cisco PWR-IE65W-PC-AC=: 2.6” W x 5.9” H x 4.6” D (66mm W x 150mm H x 117mm D)
● Cisco PWR-IE65W-PC-DC=: 2.6” W x 5.9” H x 4.6” D (66mm W x 150mm H x 117mm D)
Weight
● Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: 4.4 lb (2.0 kg)
● Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: 4.4 lb (2.0 kg)
● Cisco IEM-3000-8TM=: 2.2 lb (1.0 kg)
● Cisco IEM-3000-8FM=: 3.2 lb (1.45 kg)
● Cisco IEM-3000-4SM=: 2.5 lb (1.1 Kg)
● Cisco IEM-3000-8SM=: 3.0 lb (1.38 Kg)
● Cisco IEM-3000-4PC=: 2.4 (1.08 Kg)
● Cisco IEM-3000-4PC-4TC=: 2.5 (1.16 Kg)
● Cisco PWR-IE50W-AC=: 1.4 lb (0.65 kg)
● Cisco PWR-IE50W-AC-IEC=: 1.4 lb (0.65kg)
● Cisco PWR-IE65W-PC-DC=: 2.6 (1.18 Kg)
● Cisco PWR-IE65W-PC-AC=: 2.7 (1.24 Kg)
Environmental ranges
● Operating temperature: -40 to 167ºF (-40 to 75ºC)
● Storage temperature: -40 to 185ºF (-40 to 85ºC)
● Operating relative humidity: 10 to 95% (non-condensing)
● Operating altitude: Up to 13,000 ft (3963m)
● Storage altitude: Up to 15,000 ft (4573m)
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 12
Description
Specification
Mean time between failure
(MTBF)
● Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: 363,942
● Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: 329,451
● Cisco IEM-3000-8TM=: 926,999
● Cisco IEM-3000-8FM=: 264,689
● Cisco IEM-3000-4SM=: 8,887,990
● Cisco IEM-3000-8SM=: 7,732,890
● Cisco IEM-3000-4PC=: 1,494,990
● Cisco IEM-3000-4PC-4TC=: 1,291,440
● Cisco PWR-IE50W-AC=: 1,662,359
● Cisco PWR-IE50W-AC-IEC=: 1,662,359
● Cisco PWR-IE65W-PC-DC=: 2,468,430
● Cisco PWR-IE65W-PC-AC=: 2,488,401
Table 4.
Power Specifications for Cisco IE3000 Series Switch
Description
Specification
Maximum power
consumption
● Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: 15.1W
● Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: 15.7W
● Cisco IEM-3000-8TM=: 2.8W
● Cisco IEM-3000-8FM=: 10.1W
● Cisco IEM-3000-4SM=: 7.6W
● Cisco IEM-3000-8SM=: 12.2W
● Cisco IEM-3000-4PC=: 7.3W
● Cisco IEM-3000-4PC-4TC=: 7.9W
Input voltage and currents
supported
● Cisco IE-3000-4TC, Cisco IE-3000-8TC, 18-60VDC
● Cisco IEM-3000-4PC=, IEM-3000-4PC-4TC=: 44-57V input
● Cisco PWR-IE50W-AC=: 100-240VAC/1.25A or 125-250VDC/1A
● Cisco PWR-IE50W-AC-IEC=: 100-240VAC/1.25A, 50-60Hz
● Cisco PWR-IE65W-PC-DC=: 18-60VDC/4.3A
● Cisco PWR-IE65W-PC-AC=: 100-240VAC/1.4A or 125-250V/1A
● Cisco IE-3000-4TC, Cisco IE-3000-4TC-E: .05KVA
Power rating
● Cisco IE-3000-8TC, Cisco IE-3000-8TC-E: .05KVA
Table 5.
SFP Transceivers Support for Cisco IE 3000 Series Switch
SFP Transceivers
Specification
Industrial Temperature
● GLC-FE-100FX-RGD 100BASE-FX, 2km/MMF
100-Megabit Transceivers
● GLC-FE-100LX-RGD 100BASE-LX, 10km/SMF
Industrial Temperature
● GLC-SX-MM-RGD 1000BASE-T2, 220-550m/MMF
Gigabit Uplink
● GLC-LX-SM-RGD 1000BASE-LX/LH 550m/MMF, 10km/SMF
● GLC-ZX-SM-RGD 10000BASE-ZX 70-100km/SMF
Commercial Temperature
● GLC-FE-100FX 100BASE-FX, 2km/MMF
100-Megabit Transceivers
● GLC-FE-100LX 100BASE-LX, 10km/SMF
● GLC-FE-100EX 100BASE, 40km/SMF
● GLC-FE-100ZX 100BASE, 80km/SMF
● GLC-FE-100BX-D 10km/SMF
● GLC-FE-100BX-U 10km/SMF
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 12
SFP Transceivers
Specification
Commercial Temperature
● GLC-SX-MM 1000BASE-SX, 220-500m/MMF
Gigabit Uplink
● GLC-LH-SM 1000BASE-LH, 550m/MMF, 10km/SMF
● GLC-SX-MMD 1000BASE-SX, 220-500m/MMF, DOM
● GLC-LH-SMD 1000BASE-LH, 550m/MMF, 10km/SMF, DOM
● GLC-EX-SMD 1000BASE-EX, 40km, DOM
● GLC-ZX-SMD 1000BASE-ZX, 70-100km/SMF, DOM
● GLC-BX-D 1000BASE-BX10 10km/SMF
● GLC-BX-U 1000BASE-BX10 10km/SMF
● CWDM SFP 100km/SMF
● DWDM SFP
● GLC-T GE copper SFP transceiver
Table 6.
Compliance Specifications
Description
Standard safety
certifications
Specification
● UL 60950-1
● CSA C22.2 No. 60950-1
● TUV/GS to EN 60950-1
● CB to IEC 60950-1 with all country deviations
● NOM
Mechanical stability
● Shock 20g (operational), 30g (nonoperational)
Electromagnetic Emissions
● FCC Part 15 Class A
● EN 55022
● CISPR 22
● CISPR11
● VCCI Class A
● AS/NZS 3548 Class A
● CNS 13438 Class A
● KN 22 Class A
Electromagnetic Immunity
● EN 55024
● AS/NZS CISPR 24
● KN 24
● IEC/EN 61000-4-2 (Electro Static Discharge)
● IEC/EN 61000-4-3 (Radiated Immunity)
● IEC/EN 61000-4-4 (Fast Transients)
● IEC/EN 61000-4-5 (Surge)
● IEC/EN 61000-4-6 (Conducted Immunity)
● IEC/EN 61000-4-8 (Power Frequency Magnetic Field Immunity)
● IEC/EN 61000-4-9 (Pulse Magnetic Field Immunity)
● IEC/EN 61000-4-10 (Oscillatory Magnetic Field Immunity)
● IEC/EN 61000-4-11 (AC power Voltage Immunity)
● IEC/EN 61000-4-16 (Low Frequency Conducted CM Disturbances)
● IEC/EN 61000-4-17 (Ripple on DC Input Power)
● IEC/EN 61000-4-18 (Damped Oscillatory Wave)
● IEC/EN 61000-4-29 (Voltage Dips Immunity, DC power)
● IEEE C37.90 (Surge)
● IEEE C37.90.1 (Fast Transients)
● IEEE C37.90.2 (Radiated Immunity)
● IEEE C37.90.3 (Electro Static Discharge)
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 12
Description
Industry specifications
Specification
● EN 61131-2 Programmable Controllers (EMC/EMI, environmental, mechanical)
● IEEE 1613 Power Station and Substation Networking Devices
● IEC 61850-3 Power Station and Substation Communication Networks and Systems
● EN 61326-1 Electrical Equipment for Measurement, Control and Laboratory Use - EMC
● EN 61000-6-1 Immunity for Light Industrial Environments
● EN 61000-6-2 Immunity for Industrial Environments
● EN 61000-6-4 Emissions for Industrial Environments
● TS 61000-6-5 EMC Immunity for Power Station and Substation
● EN 50155 Railway, Electronic Equipment on Rolling Stock (EMI/EMC, environmental, mechanical)
● EN 50121-3-2 Railway, Electromagnetic Compatibility on Rolling Stock
● EN 50121-4 Railway, Emission and Immunity of Signaling and Telecommunications Apparatus
● EN 60945 Maritime Navigation and Radio-communication Equipment and Systems
● IEC 60533 Shipboard Electrical and Electronic Installation EMC
● Marine Type Approval (BV, DNV, Korean Register, Lloyd Register)
● NEMA TS-2 (EMC, environmental, mechanical)
● ABB Industrial IT certification
● ODVA Industrial EtherNet/IP support
● PROFINETv2 support
● Directive 2011/65/EU RoHS
● IP20
Hazardous locations
● UL/CSA 60079-0, -15 (Class 1, Div 2 A-D) (requires cabinet enclosure)
● EN 60079-0, -15 ATEX Certification (Class 1, Zone 2 A-D) (requires cabinet enclosure)
● IEC 60079-0, -15 (Test report only) (requires cabinet enclosure)
● UL 508
● CSA C22.2 No. 142
Compliance Marking
● UL/CSA
● CE (Europe)
● C-Tick (Australia/New Zealand)
● KCC (Korea)
● ANATEL (Brazil)
● China RoHS
Operating Temperature
● -40 C to +70 C (vented enclosure operating)
● -40 C to +60 C (sealed enclosure operating)
● -34 C to +75 C (fan or blower-equipped enclosure operating)
● -40 C to +85 C (IEC Environmental Type Testing, 16 hours)
● Operational altitude: Up to 13,000 ft
Storage Temperature
● -40 C to +85 C (storage temperature)
● Storage altitude: Up to 15,000 ft
Humidity
● Relative humidity: 5% to 95% non-condensing
Telco
● Common Language Equipment Identifier (CLEI) code
Warranty
● Five year limited warranty
Service and Support
Cisco is committed to minimizing total cost of ownership (TCO). The company offers a portfolio of technical support
services to help ensure that its products operate efficiently, remain highly available, and benefit from the most upto-date system software. The services and support programs described in Table 7 are available as part of the
Cisco Desktop Switching Service and Support solution and are available directly from Cisco and through resellers.
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 12
Table 7.
Cisco Services and Support Programs
Service and Support
Features
Benefits
Advanced Services
● Cisco Total Implementation Solutions (TIS),
available direct from Cisco
● Project management
● Supplements existing staff
● Site survey, configuration, and deployment
● Helps ensure that functions meet needs
● Cisco Packaged TIS, available through
resellers
● Installation, text, and cutover
● Mitigates risk
● Training
● Helps enable proactive or expedited issue
resolution
®
● Cisco SMARTnet and SMARTnet Onsite
support, available direct from Cisco
● Major moves, adds, and changes
● Cisco Packaged SMARTnet support
program, available through resellers
● Design review and product staging
● Cisco SMB Support Assistant
● Web access to technical repositories
● Access to software updates 24 hours
● Lowers TCO by taking advantage of Cisco
expertise and knowledge
● Minimizes network downtime
● Telephone support through the Cisco
Technical Assistance Center (TAC)
● Advance replacement of hardware parts
Ordering Information
Table 8 gives ordering information for the Cisco IE 3000 Series.
Table 8.
Ordering Information for Cisco IE 3000 Series
Description
IE-3000-4TC
Specification
● Industrial Ethernet switch
● 4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000
Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● Each switch supports 2 Cisco modules, 1 Cisco IEM-3000-8FM= module, or 1 Cisco IEM-3000-8TM= module
and 1 Cisco IEM-3000-8FM= module
● Layer 2 LAN Base image installed
IE-3000-8TC
● Industrial Ethernet switch
● 8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000
Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● Each switch supports 2 Cisco IEM-3000-8TM= modules, 1 Cisco IEM-3000-8FM= module, or 1 Cisco IEM3000-8TM= module and 1 Cisco IEM-3000-8FM= module
● Layer 2 LAN Base image installed
IE-3000-4TC-E
● Industrial Ethernet switch
● 4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000
Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● Each switch supports 2 Cisco modules, 1 Cisco IEM-3000-8FM= module, or 1 Cisco IEM-3000-8TM= module
and 1 Cisco IEM-3000-8FM= module
● Layer 3 IP Services image installed
IE-3000-8TC-E
● Industrial Ethernet switch
● 8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000
Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
● Each switch supports 2 Cisco IEM-3000-8TM= modules, 1 Cisco IEM-3000-8FM= module, or 1 Cisco
IEM-3000-8TM= module and 1 Cisco IEM-3000-8FM= module
● Layer 3 IP Services image installed
IEM-3000-8TM=
● Expansion Copper module for Cisco IE-3000-4TC and IE-3000-8TC switches
● 8 10/100 TX ports
IEM-3000-8FM=
● Expansion Fiber module for Cisco IE-3000-4TC and IE-3000-8TC switches
● 8 100 FX ports
IEM-3000-4SM=
● Expansion SFP module for Cisco IE-3000-4TC and IE-3000-8TC switches
● 4 100M SFP ports
IEM-3000-8SM=
● Expansion SFP module for Cisco IE-3000-4TC and IE-3000-8TC switches
● 8 100M SFP ports
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 12
Description
IEM-3000-4PC=
Specification
● Expansion PoE/PoE+ module for Cisco IE-3000-4TC and IE-3000-8TC switches
● 4 10/100 PoE/PoE+ ports
● External PoE power source (44-57 VDC for PoE/ 50-57 VDC for PoE+)
SIESISK9T-12252SE=
● LAN Base to IP Services Upgrade PID
IEM-3000-4PC-4TC=
● Expansion PoE/PoE+ module for Cisco IE-3000-4TC and IE-3000-8TC switches
● 4 non-PoE ports and 4 10/100 PoE/PoE+ ports
● External PoE power source (44-57 VDC for PoE/ 50-57 VDC for PoE+)
PWR-IE50W-AC=
● Expansion power module for IE-3000-4TC and IE-3000-8TC switches
PWR-IE50W-AC-IEC=
● Expansion power module for IE-3000-4TC and IE-3000-8TC switches
PWR-IE65W-PC-AC=
● AC-DC, 54VDC power module to support 65 watts for PoE/PoE+ modules
PWR-IE65W-PC-DC=
● DC-DC, 54VDC power module to support 65 watts for PoE/PoE+ modules
CAB-SM-LCSC-1M
● 1m-fiber single-mode LC-to-SC connectors
CAB-SM-LCSC-5M
● 5m-fiber single-mode LC-to-SC connectors
CF-IE3000=
● IE 3000 Compact Flash
PWR-IE3000-CLP=
● IE 3000 Power Transformer Spare connector clip
PWR-IE3000-CNCT=
● IE 3000 Power Spare connector
LPNL-IE3000=
● IE 3000 Left Panel Spare
RPNL-IE3000=
● IE 3000 Right Panel Spare
DINCLP-IE3000=
● Din-rail clip 4 pack Spare
BMP-IE3000=
● Din-rail clip bumper 4 pack Spare
STK-RACKMNT-2955=
● Din-rail adapter for rack mounting
For more information about Cisco products, contact:
●
United States and Canada: 800 553-6387
●
Europe: 32 2 778 4242
●
Australia: 612 9935 4107
●
Other: 408 526-7209
●
URL: www.cisco.com
Printed in USA
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-440930-17
04/15
Page 12 of 12
Download PDF
Similar pages