NVE-1DVI & NVD-1DVI
JPEG 2000 Encoder / Decoder
DATASHEET
IP ENCODING & DECODING
High-Definition JPEG 2000 over IP
EMCORE’s NVE-1DVI and NVD-1DVI are professional grade encoder/decoders
that simplify the transmission of DVI, VGA or HDMI with optional Line-in/
Line out, Mic-in/Mic-out audio and RS-232 serial data over IP. They are HDCP
compliant, allowing encrypted HD video to be transported over the IP network.
Distributing video, audio and data over an IP network can eliminate the need
for video matrix switches.
JPEG 2000 lossless compression technology allows the system to transmit the
highest quality video and audio over an IP network with ultra low latency
Features
„„
Secure KVM extension over IP for inputs DVI-I,
VGA and HDMI to DVI-D output, when paired
with NVD-1DVI decoder, or 3G HD-SDI output,
(<50 ms). Since there is no visible loss of quality, this makes the NVE/NVD1DVI suitable for use in mission critical applications such as command and
control centers, digital signage, healthcare AV systems, and distance learning
applications. KVM applications are also supported using the USB HID interface.
when paired with NVD-1-3G decoder
The NVE-1DVI encoder accepts an uncompressed DVI video signal, slightly
„„
USB 2.0 for HID (keyboard and mouse control)
compresses it, then transmits via a dedicated IP network. The NVD-1DVI
„„
Supports HDMI with HDCP and embedded audio
(uses DVI-HDMI adapter) and VGA over IP (using
DVI-I connector)
„„
Supports Forward Error Correction SMPTE-2022-1
for improved video quality over Gigabit Ethernet
„„
decoder receives the IP stream, decompresses it and outputs the original video
to be displayed on the HD monitor. In addition to DVI, it can also accept HDMI
video with embedded audio using the included DVI-HDMI adapter. The NVE1DVI encoder can also be paired with the NVD-1-3G decoder for conversion to
3G HD-SDI video, so long as the video content is not encrypted.
Encoders and decoders are supplied as stand-alone modules. They can also
JPEG 2000 compression / expansion with ultra
be mounted in a 19” 1RU rack enclosure side-by-side. The devices can be
low network latency (< 50 ms)
configured via a web server, CLI interface or over Telnet. A simple software
„„
Supports Full HD to 1080p / 60Hz
interface allows direct activation of the devices by any control software.
„„
Optional audio data module supports: Line-in/
Line-out stereo audio, Mic-in/Mic-out audio, with
synchronized audio and video, and RS-232
Applications
„„
Video Conferencing
„„
Digital Signage
„„
Distance Learning
„„
Command and Control Centers
„„
KVM Extension over IP
© 2013 Emcore Corporation. REV 2013.10.24
626 293 3400
video-sales@emcore.com
www.emcore.com/opticomm
EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
NVE-1DVI & NVD-1DVI
JPEG 2000 Encoder / Decoder
DATASHEET
IP ENCODING & DECODING
Encoding & Decoding
Ordering Information
Model
Description
Specifications
Values
NVE-1DVI
Encoder, JPEG 2000, DVI-I / VGA / HDMI (with adapter) input, HD 1080P, USB, Stand-alone
Compression
JPEG 2000
NVD-1DVI
Decoder, JPEG 2000, DVI-D / HDMI output, HD 1080P, USB, Stand-alone
Video Resolutions
NV-PS
12 VDC Power supply
1920x1080p maximum (HDMI)
1920x1200 maximum (DVI/VGA)
640x480i minimum
NV-MAD
Optional module: Line-in/Line-out stereo audio, Mic-in/Mic-out audio and RS-232
Device Delay
< 50 ms+ network latency
Bit Rate
20 to 800 Mbps
Frame Rate
24 Hz to 60 Hz
25 MHz to 150 MHz
12-Bit
General
Specifications
Values
Pixel Clock
Input Power
12 VDC +/- 10%
Color Depth
Power Consumption
13 Watts
Weight
6.2 lbs (2.8 kg)
Dimensions
19” plug-in with 2 units: 16” W x 9.8” D x 1.77” H (40.5cm x 25cm x 4.5cm)
Specifications
Values
-20 to 80° C
Video Inputs
DVI, VGA (accepted but not passed)
HDMI (with DVI HDMI adapter)
Standards
HDMI 1.3
Encoder Video interfaces
1 input with loopback
Decoder Video interfaces
1 output
Connector Type
DVI-I
Operating Temperature
Video
Connection Diagram
Optional Audio Data Module
Network & Control
Data
Specifications
Values
Specifications
Values
Network Interface
1x 10/100/1000 Base TX, RJ45
Data
USB 2.0 (HID, keyboard and mouse)
Remote Monitoring
& Control
Internal web server/GUI, or CLI
over USB console port, or SNMP
v1, v2, v3
Connector
USB type A (1), USB type B (1)
© 2013 Emcore Corporation. REV 2013.10.24
Compliance
626 293 3400
Specifications
Values
Line-In/Out
Audio
Line-in: unbalanced audio 2 ch forward link
Line-out: unbalanced audio 2 ch reverse link
Mic-In/Out Audio
Mic-in: unbalanced audio 2 ch forward link
Mic-out: unbalanced audio 2 ch reverse link
LINE or MIC
options
LINE or MIC can be selected using UI; either
can be used for transport but not both
Compliance
SMPTE-2022-1 FEC
Frequency Range
20 Hz to 20 KHz (+/- 0.1dB)
Sampling Rate
192 KHz
Coding
24-bit uncompressed per channel
Impedance
LINE: 47k Ohm unbalanced
MIC: 40k Ohm unbalanced
Gain
Variable range (+12dB ~ -34.5dB)
Adjustments are shown using a slider-bar
and are available as percentage increments
from 0~99 within our UI
Output Levels
1Vrms (maximum)
Signal to Noise
Ratio
>90dB
Total Harmonic
Distortion
<0.1% @ 1KHz, 10mW
Digital Crosstalk
> 90dB@ 1KHz
Analog Crosstalk
> 80dB @ 1KHz
Input Connector
> 10Kohm (unbalanced, AC coupled)
Connector
3.5 mm stereo jack
Serial Data
Full duplex RS-232
video-sales@emcore.com
www.emcore.com/opticomm
EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
Download PDF
Similar pages