Combination WDM & Fiber
Optic Mode Converter/Repeater
Model
TC3007
• Doubles Existing Fiber Cable Capacity
• Converts Multimode to Single Mode
(and vice versa)
• Data Rates up to 200 Mbps
• Local Dry Contact Alarm Relay
• Test Signal Generator & 8 Indicators
• Local & Remote Loopback
• Built-In Audible Alarm Buzzer
• Built-In Redundant Power Supply
• Standalone or Rackmount
(Interchangeable)
TC3007 Housed in TCSD7 Standalone Chassis
T
he TC3007 Multimode-to-Single Mode Fiber Optic Converter converts
multimode formats to single mode formats, or vice versa, for data transmission up to 200 Mbps.
The TC3007 functions both as a Fiber Optic Mode Converter/Repeater
and a 2-Channel Wave Division Multiplexer. This benefits users by effectively doubling existing fiber cable capacity in addition to its mode
conversion/repeater functions.
The TC3007 will convert or repeat all popular wavelengths including
1300nm or 1550nm. It is compatible with most communication technologies including Ethernet, Fast Ethernet, Token Ring, TAXI, OC1/OC3, ATM,
FDDI and SONET. It is completely transparent to incoming data and protocols.
The TC3007 provides users with several key features including
Local/Remote Loopback, Test Signal Generator, Dry Contact Alarm,
Audible Alarm Buzzer, Power Redundancy, and Standalone or Rack Mount
modularity.
The Test Signal Generator and Dry Contact Alarm are particularly beneficial. The Signal Generator (160Mbps) helps technicians conduct various
installation tests including fiber link verifications. The Dry Contact Alarm,
which includes an audible alarm buzzer, identifies Optical Signal Loss on
either the multimode or single mode ends.
Power redundancy is load sharing and switches over automatically in the
event of a failure. Power can be either 12VDC, 24VDC, -48VDC, 125VD or
115/230VAC with an external power cube. TC3007 is available in a TCSD7
Standalone chassis or a TCRM192 or TCRM195 Rackmount card cage.
Standard connectors are SC, ST or FC type. A hardened temperature
version (-20°C to 70°C), Model TC3007T, is also available.
Applications
Because of its multiplexing capability, the TC3007 is often used to
increase existing fiber optic cable
capacity in LAN or Telephony
environments that require connecting different fiber types or wavelengths,
regenerating
optical
signals and/or extending transmission distances. Typical environments include PABX, Ethernet,
Fast Ethernet, Token Ring, FDDI,
ATM and SONET (OC1 & OC3)
TC Communications, Inc.
17881 Cartwright Rd. Irvine, CA 92614 U.S.A.
Tel: (949) 852-1972, Fax: (949) 852-1948
Sales: (800) 569-4736
Web Site: www.tccomm.com
E-mail: sales@tccomm.com
LAN/WAN
TC3007
10/100Mbps
Ethernet Switch
TC3007
1300nm
1300nm
Multimode or
Single Mode
“One Fiber”, Up to 60km
Single Mode Fiber (1300/1550nm)
Multimode or
Single Mode
ATM Switch
or Router
Typical Application Using TC3007 Fiber Optic Mode Converter/Repeaters.
Reply Switch Specifications:
to
Remote
Alarm Status
Indicator
Maximum Switch Voltage: 100VDC
Switch Current: 0.5 Amp
Maximum Carry Current: 1.2 Amp
Contact Resistance: 0.2 Ohm
A terminal block connector on the
TC3007 rear panel provides for the
dry contact relay alarm. Normally
in the OPEN position, any loss of
optical signal will trigger an alarm
condition and force the switch to
the CLOSED position. This relay
can be used in conjunction with an
external device to monitor the
condition of the link.
Dry Contact Alarm Relay Switch
Data Rates
...................................up to 200 Mbps
Optical - Single Fiber Side
Transmitter ..............................LASER
Receiver...............................PIN Diode
Wavelength*
................1300/1550nm Single Mode
Fiber Optic Connectors ......SC, ST ,FC
Loss Budgets - 1300/1550nm
LASER................20dB SM @9/125μm
Optical - Dual Fiber Side
Transmitter..........................LED/ELED
Receiver...............................PIN Diode
Wavelength
.....................850/1300nm Multimode
................1300/1550nm Single Mode
Fiber Optic Connectors
..................................ST, Optional FC
Loss Budgets - 850/1300/1550nm
Multimode @62.5/125μm.............15dB
Single Mode @9/125μm..............20dB
*Any two wavelengths are available on each unit
**Contact factory for higher requirements
System
®
10
Bit Error Rate ..........1 in 10 or better
Visual Indicators
..........PWRA, PWRB, VCCA, VCCB,
.......MM RX, MM TX, SM RX, SM TX,
...................LOCLB, RMTLB, SM LB,
..............................SIG GEN, LK TST
Alarm
Dry Contact...................Normal OPEN
Power
Standard.........12VDC @500mA (max)
Optional.....24VDC,−48VDC,125VDC
............115/230VAC with power cube
#1045959
Temperature
Operating .....................−10°C to 50°C
Hi-Temp (optional)........−20°C to 70°C
Storage ........................−40°C to 90°C
Humidity ............95% non-condensing
Physical (Standalone Unit)
Height..........................(3.53 cm) 1.39"
Width.........................(18.13 cm) 7.14"
Depth.........................(16.59 cm) 6.53"
Weight........................(512 gm) 1.5 lb
Note - Information contained in this data sheet is subject to change without prior notice. 010B
TC Communications, Inc.
17881 Cartwright Road
Irvine, CA 92614 U.S.A.
Factory Tel: (949) 852-1972
Fax: (949) 852-1948
Sales Office
U.S.A. Domestic International
(800) 569-4736
(949) 852-1973
Web Site: www.tccomm.com
E-mail: sales@tccomm.com
6/09
Download PDF
Similar pages