Base Handset Alarm pendant (SOS

Connection
During message playback, press to decrease the listening volume. While in
idle mode, press to decrease the base ringer volume.
10-
0
/REPEAT
Press to repeat a message.
Press twice to play the previous message.
QUICK USER GUIDE
14. R
During a call: Press to answer a new call if you subscribed to Call Waiting
service from your service provider.
Handset
!!! Please refer to our website: www.geemarc.com for an up
to date user guide, as there may be important updates and
changes you need to be aware of !!!
1. EARPIECE
15. PHONEBOOK (
2. LCD DISPLAY
Base
3. CHARGE LIGHT (
)
4. MENU/OK (
1 Telephone base, 1 cordless Handset, 1 power adapter, 1 Alarm pendant,
1 pendant charger, 1 lanyard with breakout clip, 1 Telephone line cord, 1
NiMh battery pack, 1 Quick user guide.
INSTALLATION
Connecting the telephone
Connect the telephone cable to the telephone line socket (A) and to the
telephone wall socket (B).
Connect the power adapter jack to base (C) then connect the power
adapter plug in mains power (D).
Note: Use only the power adapters supplied with the phone.
Charger: Connect the power adaptor of the pendant in main power (D)
ALARM PENDANT
1. SOS: In idle mode, press to enter the emergency calling sequence set
Connecting the battery
Handset
Plug the battery connector securely
into the socket inside the handset
battery compartment.
Insert the supplied battery as indicated.
Align the cover flat against the battery
compartment, and then slide it upwards
until it clicks into place.
Charging the batteries
Charge the batteries for at least 12 hours when charging for the first time
for the handset and the alarm pendant.
5. UP/CALL LIST (
)
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In phonebook list/redial list/call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to the left.
During a call: Press to increase the listening volume.
During ringing: Press to increase the ringer volume.
)
In idle/pre-dial mode: Press to make a call in earpiece mode.
In phonebook/redial list/call list: Press to make a call to the selected entry
in the list in earpiece mode.
During ringing: Press to answer a call in earpiece mode.
7. DOWN/REDIAL LIST (
)
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In phonebook list/redial list/call list: Press to scroll down the list.
In editing mode: Press to move the cursor one character to the right.
During a call: Press to decrease the listening volume.
During ringing: Press to decrease the ringer volume.
8. SPEAKERPHONE (
)
While the phone is idle, press to page all handsets.
In idle/pre-dial mode: Press to make a call in speakerphone mode. Press
again to switch to earpiece mode.
In phonebook list/redial list/call list: Press to make a call to the selected
entry in the list in speakerphone mode. Press again to switch to earpiece
mode.
During ringing: Press to answer a call in speakerphone mode. Press again
to switch to earpiece mode.
2- IN USE
9. MICROPHONE
OVERVIEW
Base
1-
/HANDSET LOCATOR
ON when handsets are in use, or when the answering system
is answering an incoming call.
ON when a handset is being registered.
Flashes when there is an incoming call or when handsets are
being deregistered.
Flashes when another telephone is in use on the same line.
3- MESSAGE COUNTER
Flashes when there is an incoming call.
4-
Alarm pendant (SOS-PRO295)
)
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
During a call: Press to access Intercom / Phonebook / Redial list / Call list.
6. TALK ON (
/SKIP
Press to skip a message.
5- VOL (
)
During message playback, press to increase the listening volume. While
in idle mode, press to increase the base ringer volume.
6-
/PLAY/STOP
Press to start or stop message playback.
7-
/ANS ON
Press to turn the built-in answering system on or off.
8-
/DELETE
Press to delete the message currently playing.
Long press to delete all old messages when the phone is not in use.
9- VOL (
)
on your handset.
In call mode: press and hold for 2 seconds to stop the emergency call.
2.
/
: During a call: increase or increase the receiving volume
level, during ringing: increase or decrease the ringer level.
Press and hold
for 2 sec to do a flash ® to answer a second
incoming call ringing.
3. M1 dial the direct memory 1
4. M2 dial the direct memory 2
5. RESET
6. Microphone
7. Led indicator
(Purple)
- Steady On: Un-register.
- Slow Flash: registered but the base is not available. Searching or out
of range.
(Blue)
- Steady On: Seated in the base and fully charged.
- Steady on 3s and emit a long beep: Successfully registered.
- Double flashing: Off hook.
- Double flashing and on for 2s when just off hook: Off hook but the
signal is weak. Hear 3 rapid beeps in every 10s.
- Short flashing: idle mode and off the charger, the pendant is in
Standby mode.
- Long flashing: idle mode and off the charger. Continuously flashing:
ringing and can be heard.
(Red)
- In continue on the charger: The pendant charges.
- Long flashing: The battery is low in using and we hear a short double
beeps.
(Red/Bleu)
- Pairing mode after to hold and press the leys Vol(+) and Vol(-) during
10sec.
8. LOUDSPEAKER
9. CHARGER CONTACTS
MENU SETTING
10. SOS
In idle mode: Press and hold for a second to enter the emergency calling
sequence set in your handset.
In call mode: press and hold for 2 seconds to stop the emergency call.
11. CANCEL/MUTE (
)
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
In sub-menu mode: Press and hold to go back to idle screen.
In editing/pre-dial mode: Press to delete a character/digit.
In editing/pre-dial mode: Press and hold to delete all the characters/digits.
During a call: Press to mute/resume the microphone.
During ringing: Press to silence the handset ringer.
In idle mode: Press to intercom another handset.
12. TALK OFF (
)
In idle mode: Press to access the phonebook.
Steadily on when the handset is charging in the charger.
PACKAGE CONTENTS
lock.
key in idle mode: Press and hold to turn on/off the ringer.
key in idle/pre-dial mode/number editing mode: Press and hold to
insert a pause.
Press Menu/OK
button to open the main menu. Then use the
▼▲buttons to select an entry and confirm it by pressing the Menu/OK
button.
The factory preset PIN code is 0000
Example: Set the language on the handset
Press MENU / OK
OK
, then select ▼▲HS settings, press MENU /
, then select ▼▲language, press MENU / OK
select ▼▲desired language and then press MENU / OK
confirm.
, than
to
Handset
PHONEBOOK
)
During a call: Press to end a call and go back to idle screen In
menu/editing mode: Press to go back to previous menu.
In menu/editing mode: Press and hold to go back to idle screen.
In idle mode: Press and hold to power off the handset.
Press and hold to power on when it is off.
13. ALPHANUMERIC KEYPAD, STAR (
The phone settings are always set in the same manner:
), HASH (
)
In predial or editing mode: Press to insert a digit / character / / .
key in idle mode: Press and hold to enable or disable the keypad
►VIEW LIST
under an entry: ►ADD ►VIEW ►EDIT ►DELETE ►DELETE ALL ►PB
STATUS ►FASTDIAL
CALL LIST
►VIEW LIST
under an entry: ►ADD TO PB ►DELETE ►DELETE ALL ►DETAILS
►CATEGORY
BS SETTINGS
►BS RINGER ►RING VOLUME ►DELETE HS ►DIAL MODE ►FLASH
TIME ►CHANGE PIN
1 2 3 4
HS SETTINGS
After connection press and hold
DIRECT MEM ►M1-M2-M3-M4
SOS SETTINGS ►SOS NUMBER►SOS MESSAGE►LANGUAGE
until CONFERENCE is shown.
NOTE: Any party hangs up during a conference call will leave the other
party still in connection with the external call.
ALARM ►ON ►OFF
REGISTRATION ►BASE 1, 2, 3 or 4
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, TAM LANGUAGE, OGM
SETTINGS,ANSWER DELAY, RECORD TIME, COMPRESSION, BS
SCREENING,REMOTE ACC, CHANGE PIN)
HANDSET REGISTRATION
Note: Handset, alarm pendant and base station are pre-registered.
Up to five handsets can be registered to a single base station.
In the case of re-registration, the PIN code is 0000.
Registration a handset
On Handset: Press MENU/OK
Press MENU/OK
select ▼▲BASE(1-4), Press MENU/OK
enter 4 digits PIN for the base PIN
/HANDSET LOCATOR
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
Registration the Alarm pendant
on Base: press and hold
/HANDSET LOCATOR on the base to
enter the registration mode.
On Alarm pendant: Press and hold VOL+ together with Vol- until the LED
on pendant toggling between red and blue. Place the pendant unit close
to the charger. A long beep tone is generated and the LED is blue for a
while if the registration is a success.
De-Registration
On Handset: Press MENU/OK
, select ▼▲BS SETTINGS, press
, select ▼▲DELETE HS, press MENU/OK
PIN 0000, press MENU/OK
enter
, select ▼▲one of the handsets that
you want to de-register, press MENU/ OK
save your SOS message.
Basic Information
Using the handset:
Press LEFT SOFTKEY
and / to select SOS SETTINGS.
Press LEFT SOFTKEY
and / to select SOS MESSAGE.
In idle mode:
, select ▼▲PHONEBOOK to access the
Press MENU / OK
phonebook list (or empty),
Handset Operating time
Standby time : 100 hours
Talk time : 10 hours approx.
Press MENU / OK
to select ADD.
Press MENU / OK
to select NAME, enter the name.
Press MENU / OK
to select NUMBER, enter number.
Press MENU / OK
your phonebook entry.
and ▼▲ to select the desired ringtone for
Press MENU / OK
to save.
RF Parameter
Press LEFT SOFTKEY to stop SOS message playback.
Frequency
1.88 GHz to 1.9GHz
Direct Memory Keys
Nb Channels
10
You can store direct memory numbers (M1 and M2) in the handset. Then,
Power Supply
you can dial them directly from idle mode using the pendant.
Base
Input 100-240V 50/60Hz; output 6V;
450mA adapter
Charger
Input 100-240V 50/60Hz; output 6V;
450mA adapter
Handset
2.4V ; 500mAH rechargeable NiMh
battery pack
Set Direct Memory Keys in Handset
Press LEFT SOFTKEY
and / to select DIRECT MEM.
Press LEFT SOFTKEY
and / to select the memory key to edit (M1
or M2).
to confirm.
DIRECT MEM
stored already.
Your AMPLIDECT295SOS-PRO base can also paired as additional
handsets with some specific handset/device like our PhotoDECT295 or
SOS-PRO295 pendant which need direct memory numbers programed in
the base, and these numbers ( 4 maxi ) have to be added through the
regular handset.
Press LEFT SOFTKEY
On Handset: Press MENU / OK
to confirm.
Make Calls using Direct Memory Keys
Using the pendant:
Press M1 or M2 to dial the direct memory number stored in the handset.
, select ▼▲DIRECT MEM,
Press MENU / OK
, select ▼▲M1-M2-M3-M4,
Press MENU / OK
, enter number then OK.
ANSWERING MACHINE
USE YOUR PENDANT
Your telephone base includes a telephone answering machine that
records unanswered calls when it is on. The answering machine can
store up to 59 messages within the maximum recording time of
approximately 15 minutes. As well as recording incoming messages, you
can record memos for other users of your phone.
SOS Emergency calls
Press
/ANS ON/OFF to switch the answering machine ON or OFF.
You need to set the SOS numbers before you can make SOS emergency
REMOTE OPERATIONS
calls using the pendant or handset.
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing OGM,
press .
Using the handset:
Press LEFT SOFTKEY
and ▲/▼ to select SOS SETTINGS.
Press LEFT SOFTKEY
to show SOS NUMBER.
Press LEFT SOFTKEY
and ▲/▼ to select the SOS number to edit
(SOS 1, SOS 2, SOS 3, or SOS 4).
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
key
Functions
Press LEFT SOFTKEY and enter a new number or edit the number
to confirm or RIGHT SOFTKEY to delete.
Make SOS Emergency Calls
Press C / MUTE
, Enter the desired handset number on keypad.
NOTE: If only one cordless handset is registered to the base station,
internal call will not be available.
Using the pendant:
2
Delete the current message
playback
Press SOS key on the pendant to enter the emergency calling sequence
from the SOS 1 number to SOS 4 number (cycling 3 times). A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on.
4
Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message.
Using the handset:
5
6
,
Enter the desired handset number on keypad.
After connection quit the call on handset.
Press and hold SOS key on the handset to enter the emergency calling
sequence from the SOS 1 number to SOS 4 number. A call will be first
dialed to the SOS 1 number. If the SOS 1 number does not answer in 60
seconds, the call be will made to the SOS 2 number, and so on.
Note: The other party when receiving SOS message, has to validate the
call by pressing any keys. Then very 2mn need new validation to continue
the conversation.
Conference Call
Record SOS Messages
, Enter "9" on keypad.
Transfer an External Call
, select ▼▲INTERCOM, Press MENU / OK
, select ▼▲INTERCOM, Press MENU / OK
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to any
parts. The product must not be tampered with or taken apart by anyone
who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS:
Internal Call
Call All Handsets
GUARANTEE
SOS Settings in Handset
Press LEFT SOFTKEY
Press MENU / OK
Indoor : 50m
Outdoor :300m
Press LEFT SOFTKEY to start SOS message playback.
INTERCOM
Press MENU / OK
Valid Range
Press LEFT SOFTKEY to show PLAYBACK.
stored already.
Press C / MUTE
TECHNICAL SPECIFICATIONS
Press LEFT SOFTKEY and enter a new number or edit the number
select▼▲ REGISTRATION
At the same time on Base: press and hold
on the base to enter the registration mode.
and ▼/▲ to select RECORD MSG.
Play SOS Messages
To add new entry
ANS. MACHINE
and / to select SOS MESSAGE.
Press LEFT SOFTKEY
Press LEFT SOFTKEY
Phonebook entries are stored alphabetically by name.
DEFAULT ►PIN? 0000 by default
and ▼/▲to select SOS SETTINGS.
NOTE:
When your answering machine memory is full and the answer mode is in
ANS & RECORD, the answer mode will change to ANSWER ONLY
automatically.
It will change to ANS & RECORD mode automatically after some
messages have been deleted.
You cannot delete new messages before they were listened.
“RECORDING” will be displayed.
Your phone can store up to 50 private phonebook in the cordless handset
and the telephone base with names and numbers. Each phonebook entry
can have a maximum of 20 digits for the phone number and 12 characters
for the name. You can also select different ringer tones for your
phonebook entries.
►DATE FORMAT ►TIME FORMAT ►SET TIME ►SET DATE
Press LEFT SOFTKEY
Press LEFT SOFTKEY
Press LEFT SOFTKEY to start SOS message recording and
PHONEBOOK
DATE & TIME
MENU/OK
played.
Using the handset:
,
Enter the desired handset number on keypad.
►RING SETUP ►TONE SETUP ►SELECT BASE ►LANGUAGE
►RENAME HS ►HS DISPLAY ►AUTO ANSWER
While message is not
playing
7
5 6 Play the message
Geemarc Telecom SA hereby declares that this product is in
compliance with the essential requirements and other relevant provisions
of the Radio and Telecommunications Terminal Equipment Directive
2014/53/UE.
The CE declaration of conformity may be consulted at
www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the best
way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Skip forward to play the next
message
Turn on the answering
machine
Stop the current message
playback
8
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
While message is playing
CE Directives
9
Turn off the answering
machine
*
Enter the 4-digit remote
access PIN
For product support and help visit our website at
www.geemarc.com
telephone 01707 387602
or fax 01707 832529
QUGAMPLIDECT295 SOS-PRO_En_A3_V1.1
7 8
Download PDF
Similar pages