Industrial Network and Cloud Product Selection Guide

Empowering the
Mobile
Workforce4.0
Connect
to Industry
Industrial Network and Cloud
Product Selection Guide
Industrial Network Applications
Industrial Network Applications
Connect to
Industry 4.0
Contents
IoT Automation Systmes,
The Solutions to Industry 4.0
02
Industrial IoT Network Infrastructure
04
Cyber Physical System Connectivity
08
Trustworthy Industrial Wi-Fi Mesh Network
40
NEXCOM Industrial IoT Studio
10
IWF 300 44
CPS 100 12
IWF 310 46
CPS 200
14
IWF 6300
NISE 50 16
IWF 3310XH/M
48
NIO 50 Industrial IoT Security
01
50
52
18
IFA 1610
22
IFA 2610 24
IFA 3610 26
IVD 1000 28
iNAS 330
30
Industry 4.0 Wireless Solution (IWS)
32
nCare I4.0 Network Management Solution
IWF 800 nCare Rugged & Ultra-Fast Gigabit Industrial
Wi-Fi Solution for Video Surveillance
IWF 501/501D
54
56
IWF 502/502D
57
IWF 503
58
IWF 504D
60
36
NEXCOM’s ISA100.11a/ WirelessHART
Gateway for Wireless Process Automation
62
38
NIO 200 64
02
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
IoT Automation Systems,
The Solutions to Industry 4.0
analytics, machine learning, and business intelligence (BI) can provide
benefits such as remote monitoring to enable exception management
and advanced process control.
IoT Automation Solution Brochures
For instance, operators can benefit by getting an accurate measure of
machine status and factory operations in real-time, as well as integrating
NEXCOM maps out a solution blueprint for Industry 4.0, which seamlessly integrates
enterprise resource planning (ERP) and manufacturing execution
connected manufacturing and big data cloud computing.
systems (MES) systems to optimize supply chain management. Based
on live field data, big data analytics and machine learning can establish
NEXCOM IoT Automation Solutions (IAS) Business Group has broadened its Industry 4.0
predictive models that assist operators in managing factory operations,
solutions to include cyber-physical system (CPS) ready solutions (iAutomation), robot
identifying causes for abnormal conditions, and taking corrective actions.
solutions (NexROBO), EtherCAT motion solutions (NexMotion), and industrial network
Preventive maintenance can be executed prior an equipment failure to
& cloud solutions. All solutions leverage NEXCOM IoT Studio and IoT gateways to
ensure production efficiency and yield rate.
stream field data to cloud services powered by world-renowned cloud services such as
Microsoft Azure, IBM Bluemix™ and iSAP etc.
Positioning itself as an industrial IoT forerunner, NEXCOM has
broadened its Industry 4.0-ready iAutomation solutions, including
The integrated cloud-enabled services such as remote management, big data
cyber-physical system (CPS) ready solutions, robot solutions, EtherCAT
motion solutions, and industrial network & cloud solutions for smart
manufacturing. Mirroring the ambition for Industry 4.0, a connected
IoT Automation Solutions
Master e-Catalog
USB Driver
NEXCOM provides a wide range of IoT Automation
solutions for increasing demands of industrial applications.
NEXCOM IoT Automation Solutions Master e-Catalog
covers NEXCOM’s most up-to-date and completed
solutions, detailed product datasheets, and selection
guides of high-performance industrial fanless computers,
different-size industrial panel PCs, machine and robot
automation lineups, PC-based factory automation families,
IoT solutions, industrial wireless solutions, and embedded
computing and customization services.
factory will enable raw data to be exchanged over the network and
Microsoft
Azure
Application
Layer
Custom
SaaS as SI
IBM Bluemix™
Private
Cloud
translated into valuable information, helping enterprises make insightful
decisions and therefore increase competiveness in fast-paced industries.
Our best-in-class solution topology has new technological breakthroughs
and innovative convergence of data communications technology. It can
IoT Automation Solution
Product Selection Guide
better serve customers in an increasingly competitive global marketplace
I4.0 War Room
and lead manufacturers to smart factory automation.
Big SCADA
Wireless Networking (Mesh Backbone)
Edge Gateway
The convergence of physical and digital worlds is giving
rise to the smart factory and a new generation of industrial
machinery. This new era, known as Industry 4.0., focuses
on using the IoT and CPS to streamline manufacturing and
business processes, improve versatility and precision, and
boost quality and capacity.
NISE Series
EZ Mesh
IIoT Gateway Builder
Communication
Layer
IoT Studio Software
I4.0 Management Suite
Cloud Configurator
Cloud Protocols
nCare Software
AP Central Management
Device Configurator
Field Protocols
Field Devices Management
IIoT Gateway
IWF 300
Mobile Mesh
IWF 300
Wi-Fi AP
IWF 500
CPS Series
Device Networking
Industrial Firewall
IFA Series
Device
Layer
Protocol Converter
JMobile Gateway
CPS Gateway
ISA100 Gateway
NIO 200I
WirelessHART Gateway
NIO 200H
Figure 1. Industry 4.0 Solution Map & Topology.
02
Factory Automation
Machine Automation
EtherCAT Master
Controller
NexECM Series
HMI JMobile
eSmart Series
IPPC/APPC Series
CNC Controller
NControl Series
Predictive Maintenance System
NISE/RA XM Series
Automation I/O
VIPA SLIO
NEXCOM EtherCAT robot solutions, NexROBO,
unleash possibilities for in-house development, add-on
functionality, and reconfiguration of robots. Based on
an open and modular architecture, NexROBO delivers
development flexibility and expandable functions with a
variety of EtherCAT Master controllers, pre-validated thirdparty EtherCAT slaves, and NEXCOM EtherCAT Master
development stack, aimed to stimulate the broad use of
robotic systems and industrial robots.
Robot Control
Industrial Network and Cloud
Product Selection Guide
SoftPLC
NIFE Series
IPPC/APPC Series
Process DCS
FCS2000
Robot & Macine Automation
Product Selection Guide
GMC Controller
MAC Series
EtherCAT I/O
NEIO Series
Robot Controller
NET Series
Robot Solution Pack
6R Robot
Delta Robot
SCARA Robot
The industrial IoT (IIoT) network lay the important
foundation for Industry 4.0. It includes three pillars—
Cyber-Physical System (CPS), Industrial Wireless Solution,
and Industrial Firewall for IoT Security. NEXCOM provides
the IIoT network with complete product solutions which
cover all three scopes. The product solutions are designed
with the concepts of "ready to use" and "click to connect"
so users can easily establish the IIoT network that can
encompass existing automation systems in their Industry
4.0 and IIoT applications.
03
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
Industrial IoT Network
Infrastructure
needs, and yet poses great challenges
Secondly, a CPS must be capable of processing data. Despite the
engineers to configure connection settings without the need of
in system integration on the course of
diversity of data formats and industrial communication protocols, a
programming and coding.
IIoT transformation. How to integrate
CPS has to parse data for information and convert it into different
and connect industrial systems to upper
formats that can be recognized by edge servers and cloud platforms
Building on top of CPS are industrial wireless connectivity and
layers of network and cloud platforms
on upper layers of IIoT networks.
network security. The former offers a flexible alternation that
extends the reach of internet, and the latter helps strengthen
without compromising system reliability
and information security becomes an
Thirdly, a CPS must have a user-friendly interface to support
network security of open IoT architecture. NEXCOM has developed
Industry 4.0 and Industrial IoT (IIoT) have become the mainstream of smart
important subject and defines a unique
protocol conversion functions as well as to deliver high reliability
NEXCOM Industry 4.0 Wireless Solutions and Industrial Firewall
manufacturing. Devices, software services, and cloud platforms spring up
architecture for IIoT (Figure 1).
(Figure 3).
Solutions in this regard.
vertical integration. However, industrial control and automation systems
The foundation of the IIoT architecture
NEXCOM’s CPS lineup is equipped with
have a close architecture which delivers high reliability, meets operational
rests on cyber-physical systems (CPSs). A
Modbus, industrial fieldbus, and OPC UA
CPS can acquire data generated by on-
communication capabilities to amass data
premises industrial systems in a closed-
from most industrial systems (Figure 4).
loop network and share it over internal
As to upper connectivity, MQTT, SQLite,
and external networks for the purposes
and HTTPS are supported so NEXCOM’s
of data fusion and analysis. A CPS plays
CPS can integrate with cloud platforms,
such a crucial role in the formation of
databases, and web services and therefore
IIoT networks that its importance is
give our clients great flexibility to choose
strongly stressed by Industry 4.0.
a data receiving end they see fit. To
around the IIoT with great stress laid on the importance of horizontal and
Figure 1. Architecture of NEXCOM’s IoT Network Solutions.
nCare Suite
Information
I4.0 Node and Network Manager
Switch
further reduce system integration efforts,
IWF 310
IWF 300 Ruckus AP
EZ Mesh AP
Industrial
IoT Studio
NIO 200
IFA 3610
Enterprise AP
WirelessHART
Industrial
Firewall
Cyber-Physical System
NEXCOM has developed a configuration
A CPS must meet three technology
This tool integrates features required of
requirements. Firstly, a CPS has to
establishing end-to-end connections and
support special communication protocols,
is designed with a graphical user interface
or network interfaces, commonly
(G U I ) e n a b l i n g s y s t e m i n t e g r a t i o n
tool—NEXCOM Industrial IoT Studio.
Figure 3. NEXCOM Industrial IoT Studio is a web-based configuration tool designed
with a graphical user interface (GUI) and supports drag-and-drop operations.
used in the industrial sector so it can
communicate with industrial systems like
IoT
Gateway
NISE 50
CPS 200
Fieldbus
Enabled
Devices/
Control
programmable logic controllers (PLCs)
CPS 100
General
Purpose
PLC
Fieldbus
Enabled
data required of data fusion and big data
NIO 50
Cloud
analysis (Figure 2).
PLC
SQLite
MQTT
HTTPS
Management Pad
(with APP)
Machine
Manufacturing
Connectivity
IBM Bluemix™
Microsoft Azure
SAP HANA
and machine controllers and extract
Wrieless Sensor
Network
Enterprise
Connectivity
All-in-One Configuration Interface
ERP
SQLite MSSQL
Cloud
MQTT
 All Communication
Web Server
 H/W Setting
HTTPS
 H/W Monitoring
 Web-Enabled
Modbus
DeviceNet
PROFINET
PROFIBUS
OPC UA
CPS 200
OPC
Modbus/TCP
PLC
Figure 2. Communication protocols
supported by NEXCOM’s CPS gateways and
IoT Studio.
04
Modbus/RTU
Slaves
Fieldbus
PLC
Meter
Robot
Machine
Figure 4. NEXCOM CPS provides seamless end-to-end connection.
05
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
62
43
2016
2017
2018
2016
80
2019
Information Tech
 Big Data Analytics
2020
 Network Management
74
 Node Health
From the technology point of view, the network architecture for
Industry 4.0 is formed of three layers: operational technology,
communications technology, and information technology (Figure
5). The operational technology layer includes a wide array of on-site
equipment devices generating a flood of data on field operations.
Communication Tech
I4.0 Network Backbone & Real-time Data Integration
 Wireless
Communications technology makes up a network backbone that
transfers data to remote ends where information technology can be
 Mobility
applied to generate feedbacks on operations based on results of big
 Gateway Communication
data analysis.
Operation Tech
 Field Devices
NEXCOM Industry 4.0 Wireless Solutions are designed for industrial
environments which are characterized for being harsh, highly
Figure 7. HENGE™ series.
 Field Protocols
complex, capricious, and interference-prone. The solutions feature
 Field Diversity Interfaces
Wi-Fi Mesh technology to provide multipath routing for not only
data storage provided by extremely rugged network-attached
connecting onsite wireless mobile devices but also building a high
storage iNAS 330. To sum up, the high level of function integration
level of reliability and flexibility into network backbones. Combining
of the HENGE™ series makes it one of indispensable network security
NEXCOM Wi-Fi Device Gateways and nCare Device and Network
solutions in industrial automation applications (Figure 8).
Figure 5. I4.0 wireless solution consists of a 3-layer integration of IT, CT and OT networks—all converged for IIoT.
Health Management Solution (Figure 6), users can form a three-
Industry 4.0 Wireless Connectivity
layer network architecture for Industry 4.0. The Industry 4.0 Wireless
The IFA family consists of three all-round broadband-compatible
Solutions offer several advantages including reliable network
multi-port industrial firewalls/VPN routers. They offer stateful
The main concept of Industry 4.0 is to reduce unexpected machine
As Industry 4.0 is taking the industrial sector by storm, factory
connections, seamless Wi-Fi coverage, deployment speed and
packet inspection (SPI), denial-of-service/dynamic denial-of-service
downtime and production interruption and optimize the efficiency
operators are putting down great efforts to meet ever-changing
flexibility, and unified visualized interface, and have tremendous
protection, intrusion inspection, port scanning detection, and real-
of process management by leveraging clouds services and big data
manufacturing needs and adhere to operational requirements.
applications—shop floor device monitoring, automated guided
time alerts. The IFA family provides IPsec and SSL VPN protection
analysis on upper network layers. To make this happen, factory
Wired network connections can no longer satisfy operational
vehicles (AGV), video wireless, and process automation in the oil, gas
to arm industrial systems with extra shields. This feature enables
operations, equipment health status, and manufacturing processes
demands for mobility, unmanned operations, and customization. As
and chemical industry.
industrial system vendors to not only remotely but also securely
must be able to be monitored and managed from a distance,
a result, the indispensable role of network backbone falls on wireless
underlining the importance of a network backbone dedicated to
communications to provide reliable and stable network connections
industrial applications.
between factories and business headquarters.
access and manage their products installed on clients’ premises
Industrial Firewall
over simplified private network tunnels. Furthermore, the rugged
design of the IFA family can withstand rigorous challenges of harsh
More and more facilities, systems, equipment are coming online with
operating environments, making it ideal for industrial applications. It
the aim to improving operational efficiency. To keep improvements
is worth mentioning that the IFA family can operate over an extended
on course, NEXCOM has added rich feature sets, expandability, and
temperature range from -20 degrees Celsius to 70 degrees Celsius.
rugged design to its HENGE™ series which is made up of the IFA
Management
Layer
SCADA/ MES
nCare
Switch
Subnet A
IWF 310
AP/Mesh Point
client—the IFA family can strengthen security protection for high-
access, simplified private network tunneling, reliable connections,
value industrial systems used in industrial automation, process
stateful edge firewall protection, intrusion prevention, and reliable
control, and power stations applications.
Management
Layer
IWF 503
Access
Point
ISA100
WiHART
MQTT
ease that users can tap into built-in features to enjoy secure remote
Switch
IWF 300
AP/Mesh Point
NEXCOM
IPC
Device Node
Layer
Equipped with full SSL VPN functionality—VPN server and VPN
Subnet B
NIO 200
Mesh/
IWSN Gateway
Network Device
Layer
family of industrial firewalls and VPN dispatcher IVD 1000. It is with
Modbus
LAN
VPN
Network Device
Layer
Microsoft
WMI
Internet
Company Firewall VPN Dispatcher
HQ
3rd Party
Access Point
NIO 50
Xcare™
PLC
Programming Monitoring
LAN
VPN
Industrial Firewall
Industrial Storage
Tunnel
Gateway
PLC
Device Node
Layer
Meter
Air Compressor
Pump
Figure 6. nCare Device and Network Health Management Solution.
06
Phone/Pad
Camera
Mobile Devices
PLC
HMI
Machine
Machine
Machine
Robot
Figure 8. Industrial network architecture.
07
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
Cyber-Physical System
with Connectivity
support is imperative to data processing,
high reliability. The best choice of hardware platform for a CPS is, no
for industrial environments, full compatibility with industrial
integration, and uploads. IoT automatic
doubt, an industrial computer which combines flexible expansion
communication protocols, and simple and fast system configuration
control capability allows automation
for communications featured in PCs and sturdy design required of
are qualities expected of an ideal and practical CPS solution which
systems to leverage the power of remote
industrial products.
enables IIoT to be applied to real-case scenarios and scale fast (Figure 3).
big data analysis while delivering highperformance highly reliable real-time
NEXCOM’s CPS lineup is made up of a
control with real-time operating systems.
series industrial computers equipped
A cyber-physical system (CPS) serves a pivotal role in the industrial IoT (IIoT). Since
IoT HMI is aimed to achieve overall
with Modbus, fieldbus, and OPC UA
industrial equipment uses special protocols incompatible with other applications,
management from business to machine
communication capabilities to amass data
enabling data sharing among physical devices at the field site and cyber layers of
levels by taking advantage of information
from most industrial systems. As to upper
networks requires manufacturers and system integrators to go the extra mile to
on cloud dashboards and single-unit
connectivity, MQTT, SQLite, and HTTPS are
enjoy the benefits of big data analysis and realize the value of Industry 4.0 and
monitoring for timely and effective system
supported so NEXCOM’s CPS can integrate
IIoT (Figure 1). Therefore, by provide two-way communication and control, a CPS
adjustments.
with cloud platforms, databases, and web
A CPS must meet three technology
flexibility to choose a data receiving end
Acquiring data from on-premises facilities is one key feature of a CPS. Other
requirements. Firstly, a CPS has to support
they see fit (Figure 2). To further reduce
features required of a CPS include IoT communications support, IoT automatic
special communication protocols, or
system integration efforts, NEXCOM has
control capability, and IoT human-machine interface (HMI). IoT communications
network interfaces, commonly used in the
developed a configuration tool—NEXCOM
industrial sector so as to communicate
Industrial IoT Studio. This tool has combined
with industrial systems like programmable
features required to establish end-to-end
logic controllers (PLCs) and machine
connections into a unified graphical user
controllers and extract data required of
interface (GUI) (Figure 2). That is to say that
data fusion and big data analysis. Secondly,
system integration engineers can configure
a CPS must be capable of processing data.
connection settings without the need of
Despite the diversity of data formats
programming and coding.
Physical
Physical World
World
Cyber-Physical
Cyber
Cyber World
World
Fieldbus Networking
Networking
Fieldbus
IoT Gateway/HMI
Cloud/ERP/MES
Cloud/ERP/MES
IoT
IoT Controller
Controller
Wirsless
Wirsless Network
Network
Wi-Fi/3G/LTE/BT
Wi-Fi/3G/LTE/BT
cloud platforms on upper layers of IIoT
networks. Thirdly, a CPS must have a user-
Model Name
Field Data
Concentration
Area 2
Area N
Area 3
Figure 3. In a real case scenario, a CPS can harvest manufacturing data from a closed-loop
machine and send the data the business headquarters over internet.
Category
Remote Visualization
CPS 200
CPS 100
CPS 200
NISE 50
Fieldbus Enabled IoT Gateway
Fieldbus Enabled IoT Edge Gateway
General Purpose IoT Gateway
Photo
Cyber
SQLite MSSQL
Cloud
MQTT
Web Server
HTTPS
Open
Open System
System
Industrial
Industrial IoT
Communication PRFINET-RT, PROFIBUS-DP, EtherNet/IP (Slave), PRFINET-RT, PROFIBUS-DP, EtherNet/IP (Slave),
Protocols for
Modbus/TCP, Modbus/RTU (Master),
Modbus/TCP, Modbus/RTU (Master),
OPC-UA Client
OPC-UA Client
Local Devices
MQTT, SQLite, Https
MQTT, SQLite, Https
MQTT, SQLite, Https
Wireless
Communication
Interface
Options
Wi-Fi, 3G, 4G/LTE
Wi-Fi, 3G, 4G/LTE
Wi-Fi, 3G, 4G/LTE
Type of LAN
COM Port
USB
Display
2
2
2
RJ45
RJ45
RJ45
1 x RS-232/422/485
2 x RS-232/422/485
2 x RS-232
1 x RS-422/485
1 x USB 3.0
1 x USB 2.0
1 x USB 3.0
3 x USB 2.0
4 x USB 2.0
1 x HDMI
N/A
1 x DVI-I, 1 x DP
Mounting Style
Wall/DIN Rail
Wall/DIN Rail
Wall
Temperature
-20°C ~ +70°C
0°C ~ +50°C
-5°C ~ +55°C
Dimension (mm)
63 x 100 x 151
85 x 157 x 214
162 x 126 x 150
24VDC ±20%
24VDC ±20%
24VDC ±20%
CE, FCC
CE, FCC
CE, FCC
16G eMMC
128G SSD
16G eMMC (Optional mSATA)
DC Input
Figure 2. NEXCOM Industrial IoT Studio
combines all required features into a
unified graphical user interface.
Modbus/TCP, Modbus/RTU (Master)
Communication
for Cloud/Server
Number of
LAN Port
08
Controller/
Gateway
Product Selection Guide
conversion functions as well as to deliver
ERP
Industrial Automation
Automation
Highly reliable hardware platform tempered
Controller/
Gateway
and convert it into different formats that
friendly interface to support protocol
IoT Control/HMI
Device I/O Expansion
Closed
Closed System
System
Controller/
Gateway
can be recognized by edge servers and
RTOS Embedded
Physical
Physical
Controller/
Gateway
Area 1
and industrial communication protocols,
a CPS has to parse data for information
Manufacturing Process
Manufacturing
Process
Communication
 Communication
Control
 Control
Visualization
 Visualization
Headquarters
services and therefore give our clients great
can help bridge the last mile connection gap to seamlessly integrate OT and IT.
Figure 1. A CPS which can bridge the last mile connection gap between the
cyber and physical ends serves a pivotal role in IIoT.
Cloud
Certification
Storage
09
NEXCOM Industrial IoT Studio
Industrial Gateway Builder
Support OS & Hardware Matrix
Private
Cloud
Microsoft
Azure
Connect to Cloud Securely
Devices
Windows Embedded 8
Yocto (Linux)
NISE 50
O
O
CPS 100
X
O
CPS 200
X
O
Note: Products and models are listed but not limited, please contact your sales representatives for updates.
*1. Node-RED is a visual wiring tool for the Internet of Things. A creation of IBM emerging technologies.
NEXCOM Industrial IoT Studio
Industrial Gateway Builder
Manage CPS Efficiently
CPS 100
CPS 200
Processing Data Analytically
Controllers
Devices/PLC
Sensors
Main Features
ŒŒ Processing data analytically by redefined the categories and
offered customized nodes
ŒŒ Manage cyber physical system efficiently by NEXCOM hardware
information nodes
ŒŒ Connect to cloud securely with verified MQTT and AMQP nodes
ŒŒ Support SQLite for databased application and https for web service
ŒŒ Support Fieldbus (PROFINET, PROFIBUS, Ethernet/IP) configuration,
Modbus/RTU and Modbus/TCP master, OPC-UA client for field
devices/controller data concentration
Product Overview
IoT is transforming business across industries with innovative applications. To spur more innovations, NEXCOM Industrial IoT Studio, a web-based configuration
tool, demonstrated how developers can swiftly implement customized features by taking advantage of pre-integrated functions with simple clicks, drags,
and drops. Accelerating the development of IoT applications with reduced efforts enables immediate testing of innovative ideas, turning proof-of-concept
inventions into wide-scale deployment. NEXCOM Industrial IoT Studio which is a GUI tool powered by using Node.js and IMB Node-RED (*1).
Specifications
Category
Modbus
Fieldbus
Description
Get the registers and status
with the Modbus protocol
Get the registers and status
from the controller/devices
with Fieldbus interface
Node
Modbus-TCP read
Modbus-TCP write
Modbus-RTU read
Modbus-RTU write
PROFIBUS read
PROFIBUS write
PROFINET read
PROFINET write
EtherNet/IP read
EtherNet/IP write
Merge
Category
Description
Input
Prompt for user input from
network or serial port
Inject, catch, status,
MQTT, http, websocket,
TCP, UDP, serial
Output
Expose the data from
service or debug message
Debug, MQTT, http
response, web socket,
TCP, UDP, serial
Function, template,
delay, trigger, comment
http request, TCP
request, switch, change
range, csv, html, json,
xml, rbe
Function
Boundary
Critical section
GPIO
Data
process
Process or encrypt/decrypt
data from buffering
H/W Info
Social
Base64Encode
Base64Decode
Access 'multipart/form-data' Email in
content by email
Email out
Storage
Read/write the file or
database
Cloud
Provides Azure service
3DesEncrypt
Graph
10
Industrial Network and Cloud Product Selection Guide
File in, file out
SQLite
eventhub
3DesDecrypt
OPC UA Client
Node
IoT hub
MS SQL
Industrial Network and Cloud Product Selection Guide
11
CPS 100
Industrial IoT Remote Gateway
Dimension Drawing
106
100
ŒŒ Seamless integration of field devices, web, database and cloud services
ŒŒ Fieldbus (slave) PROFIBUS®, PROFINET® or EtherNet/IP™ support
ŒŒ Modbus TCP/RTU, OPC UA support in parallel
15.50
3.60
Main Features
151
120
63
18
143
151
R3.7 3.60
5
30
ŒŒ Intuitive visual flow-based programming paradigm
ŒŒ Secure HTTPS/TLS encrypted data transmissions
Product Overview
CPS 200/100 series, an edge IoT gateway, is fully integrated with fieldbus accessibility, Modbus TCP/RTU, OPC UA and IoT studio for extremely easy
deployment of both centralized/decentralized field data implementation in automation process. Equipped with fieldbus accessibility, user can not only
retrieve the data for live monitoring but also extract key information for custom process, like prediction and maintenance, yield rate of production…and
so on. Furthermore, IoT studio brings benefits of drag-and-drop data process, exchange field data over network securely between edge and the Cloud,
flexible field data store/analytics/statistics…and so on.
CPS 200/100 series is a perfectly matched solution for remote field data processing in automation.
Dimensions
Operation Temperature
ŒŒ 63mm (W) x 100mm (D) x 151mm (H)
ŒŒ Ambient with air flow: -20°C ~ 70°C
Weight
Storage Temperature
ŒŒ 600g
ŒŒ -20°c ~ 80°c, relative humidity: 10% ~ 95%
Construction
Regulation
ŒŒ Aluminum and metal chassis with fanless design
ŒŒ CE/FCC
ŒŒ LVD
Shock Protection
ŒŒ 50G, half sine, 11ms, IEC60068-2-27
Benefits of CPS Solution
Gateway Platform Specifications
Seamless Integration
CPU Performance
ŒŒ Compatible with existing installation in field control network
ŒŒ Multiple fieldbus (slave) support – PROFIBUS®, PROFINET® or
EtherNet/IP™
ŒŒ Industrial protocol support – Modbus TCP/RTU, OPC UA client
ŒŒ Data mining – MQTT-broker, OPC UA client
ŒŒ Data processing and distribution – JavaScript, JSON, XML, MQTT
client, TCP, UDP, HTTP, Websocket, E-mail
ŒŒ On-board Intel® Atom™ processor E3805 1.33 GHz
Secure Gateway Management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Secure boot
Gateway monitoring
Network protocol – HTTP, HTTPS, IPv4, TCP/IP, UDP, SSH, SNMP
Wireless support* – Wi-Fi
* additional module support
Productive Engineering
ŒŒ Drag-n-drop workflow builder
ŒŒ Versatile pre-defined function blocks
ŒŒ Initialize-configure-read/write-close pattern
Direct IoT Communication
ŒŒ For devices with OPC UA, Modbus and fieldbus protocol support
ŒŒ In parallel to the PLC over a direct communication channel
ŒŒ With data semantics for easy abstraction in the cloud
12
Industrial Network and Cloud Product Selection Guide
Memory
ŒŒ Built-in DDR3L 2GB system memory
Networking Connectivity
Vibration Protection
Ordering Information
ŒŒ Random: 2Grms @ 5~500HZ, IEC60068-2-64
ŒŒ Sinusoidal: 2Grms @5~500Hz, IEC60068-2-6
ŒŒ CPS 100-DP (P/N: 10JC0010000X0)
Industrial IoT Remote Gateway, E3805, 2GB RAM, 16GB eMMC,
PROFIBUS®
ŒŒ CPS 100-RE (P/N: 10JC0010001X0)
Industrial IoT Remote Gateway, E3805, 2GB RAM, 16GB eMMC,
Real-time Ethernet
ŒŒ 2 x 10/100/1000Mbps LAN ports
ŒŒ Isolated field control 10/100Mbps ports, PROFIBUS®, PROFINET® or
EtherNet/IP™
Major I/O Connectivity
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
1 x USB 3.0 (900mA)
1 x USB 2.0 (500mA)
1 x RS232/485, 2.5KV isolation protection
Management console
4 x DI/DO
Wireless Connectivity (optional module)
ŒŒ IEEE 802.11 a/b/g/n connectivity
Power Requirement
ŒŒ 1 x 24VDC input, ±20% range
Storage Device
ŒŒ 1 x eMMC 4GB flash memory
Industrial Network and Cloud Product Selection Guide
13
CPS 200
Industrial IoT Edge Gateway
85
63
4.20
R4
ŒŒ Seamless integration of field devices, web, database and cloud services
ŒŒ Fieldbus (slave) PROFIBUS®, PROFINET® or EtherNet/IP™ support
ŒŒ Modbus TCP/RTU, OPC UA support in parallel
213.80
182
11
202.80
NS
EtherNet/IP
MS
63
Main Features
20.80
157
Dimension Drawing
ŒŒ Intuitive visual flow-based programming paradigm
ŒŒ Secure HTTPS/TLS encrypted data transmissions
Product Overview
Power Requirement
CPS 200/100 series, an edge IoT gateway, is fully integrated with fieldbus accessibility, Modbus TCP/RTU, OPC UA and IoT studio for extremely easy
deployment of both centralized/decentralized field data implementation in automation process. Equipped with fieldbus accessibility, user can not only
retrieve the data for live monitoring but also extract key information for custom process, like prediction and maintenance, yield rate of production…and
so on. Furthermore, IoT studio brings benefits of drag-and-drop data process, exchange field data over network securely between edge and the Cloud,
flexible field data store/analytics/statistics…and so on.
CPS 200/100 series is a perfectly matched solution for remote field data processing in automation.
ŒŒ 1 x 24VDC input, ±20% range
Storage Device
ŒŒ 1 x 2.5" front accessible 128GB SSD support
ŒŒ 1 x SD card socket
Dimensions
ŒŒ 85mm (W) x 157mm (D) x 214mm (H)
Ordering Information
ŒŒ CPS 200-DP (P/N: 10JC0020000X0)
Industrial IoT Edge Gateway, J1900, 4GB RAM, 128GB SSD, PROFIBUS®
ŒŒ CPS 200-RE (P/N: 10JC0020001X0)
Industrial IoT Edge Gateway, J1900, 4GB RAM, 128GB SSD, Real-time
Ethernet
Weight
Benefits of CPS Solution
Gateway Platform Specifications
Seamless Integration
CPU Performance
ŒŒ Compatible with existing installation in field control network
ŒŒ Multiple fieldbus (slave) support – PROFIBUS®, PROFINET® or
EtherNet/IP™
ŒŒ Industrial protocol support – Modbus TCP/RTU, OPC UA client
ŒŒ Data mining – MQTT-broker, OPC UA client
ŒŒ Data processing and distribution – JavaScript, JSON, XML, MQTT
client, TCP, UDP, HTTP, web socket, E-mail
ŒŒ On-board Intel® Celeron® processor J1900 Quad Core 2.0 GHz
Shock Protection
Memory
ŒŒ SSD: 20G, half sine, 11ms, IEC60068-2-27
ŒŒ CFast: 50G, half sine, 11ms, IEC60068-2-27
Secure Gateway Management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Secure boot
Gateway monitoring
Network protocol – HTTP, HTTPS, IPv4, TCP/IP, UDP, SSH, SNMP
Wireless support* – Wi-Fi, 3G/UMTS, LTE
* additional module support
Productive Engineering
ŒŒ Drag-n-drop workflow builder
ŒŒ Versatile pre-defined function blocks
ŒŒ Initialize-configure-read/write-close pattern
Direct IoT Communication
ŒŒ For devices with OPC UA, Modbus and fieldbus protocol support
ŒŒ In parallel to the PLC over a direct communication channel
ŒŒ With data semantics for easy abstraction in the cloud
14
ŒŒ 2.25Kg (w/ disk)
Industrial Network and Cloud Product Selection Guide
ŒŒ Built-in DDR3L 4GB system memory
Display
ŒŒ DP and DVI-I display output
Networking Connectivity
ŒŒ 2 x 10/100/1000Mbps LAN ports
ŒŒ Isolated field control 10/100Mbps ports, PROFIBUS®, PROFINET® or
EtherNet/IP™
Major I/O Connectivity
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
1 x miniSIM card holder
1 x USB 3.0 (900mA)
3 x USB 2.0 (500mA per each)
2 x RS232/485, 2.5KV isolation protection on COM1
Power on/off switch
1 x DI/DO
Construction
ŒŒ Aluminum and metal chassis with fanless design
Vibration Protection w/ CFast & SSD condition
ŒŒ Random: 2Grms @ 5~500HZ, IEC60068-2-64
ŒŒ Sinusoidal: 2Grms @5~500Hz, IEC60068-2-6
Operation Temperature
ŒŒ Ambient with air flow: 0°C ~ 50°C
Storage Temperature
ŒŒ -20°c ~ 80°c, relative humidity: 10% ~ 95%
Regulation
ŒŒ CE/FCC
ŒŒ LVD
Wireless Connectivity (optional module, up to 2)
ŒŒ IEEE 802.11 a/b/g/n connectivity
ŒŒ 3G/LTE connectivity
Industrial Network and Cloud Product Selection Guide
15
NISE 50
Intel® Atom™ Processor E3826 Dual Core Fanless System
Dimension Drawing
4.00
Ø 8.00
70.00
150.00
25.00
Ø 3.70
Main Features
Onboard Intel® Atom™ processor E3826 dual core, 1.46GHz
1 x HDMI display
2 x Intel® I120AT GbE LAN ports; support WoL, teaming and PXE
4 x USB 2.0
3 x mini-PCIe sockets for optional Wi-Fi/3.5G/LTE modules
Product Overview
Specifications
CPU Support
Main Memory
ŒŒ On-board 2GB DDR3L 1066/1333 RAM
-- Un-buffered and non-ECC
-- Max up to 4GB for option
ŒŒ 3 x DB9 for COM1 & COM2 & COM3
Industrial Network and Cloud Product Selection Guide
Memory
Android4.4
WIN10
IOT Ent.
WES8
OS
WIN 7 PRO
WES7E
WEC7
32bit
32bit
32bit
32bit
32bit
NISE 50-4G-32G
eMMC
mSATA
32GB
4GB
64bit
64bit
64bit
64bit
64bit
64bit
64bit
32bit
NISE 50W
SSD
2GB
32bit
32bit
32bit
32bit
Dimensions
Construction
ŒŒ Metal Chassis with fanless design
ŒŒ Operating temperature:
Ambient with air flow: -5°C to 55°C
(according to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage temperature: -20°C to 75°C
ŒŒ Relative humidity: 10% to 95% (non-Condensing)
ŒŒ Shock protection:
-- mSATA / EMMC: 50G, half sine, 11ms, IEC60068-27
ŒŒ Vibration protection w/mSATA or EMMC condition:
-- Random: 2Grms @ 5~500 Hz, IEC60068-2-64
-- Sinusoidal: 2Grms @ 5~500 Hz, IEC60068-2-6
Certifications
ŒŒ C
E
ŒŒ FCC Class A
ŒŒ UL/cUL
Ordering Information
ŒŒ NISE 50 (P/N: 10J00005000X0)
ŒŒ 4 x GPI and 4 x GPO (programmable to GPI or GPO)
ŒŒ 1 x DB9, only support RS232, Tx/Rx/GND single
Storage Device
TX power on/off switch
A
1 x Storage/2 x GPO programmable LED
1 x SIM card holder
2 x Intel® I210AT GbE LAN ports; support WoL, teaming and PXE
1 x HDMI display output
4 x USB 2.0 (500mA per each)
2 x Antenna holes for optional Wi-Fi/3.5G antenna
Storage
Environment
NISE 50
eMMC
mSATA
16GB
2GB
64bit
ŒŒ 162mm (W) x 26mm (H) x 150mm (D) without wall-mount bracket
I/O Interface - Internal
ŒŒ On-board 16GB EMMC
ŒŒ Optional mSATA module
I/O Interface-Rear
16
-- COM1: full RS232 signal
-- COM2: RS232, only support Tx/Rx/GND
-- COM3: RS422/485 auto flow control
ŒŒ 1 x Line-out
ŒŒ Support 24V DC input
Display Option
I/O Interface-Front
Model Name
* Note: only one LAN can be active under Android 4.4
ŒŒ 1 x HDMI display
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
162.00
Support OS
Powered by the latest generation of Intel® Atom™ processor E3826 (formerly codenamed "Bay Trail-I"), NISE 50 series positions at the intelligent IoT
gateway for factory automation and for smart city applications. Up to 4G on-board DDR3L memory, the NISE 50 series support operating temperature
from -5 up to 55 degree C with 24V DC input with +/-20% range. The NISE 50 series have strong connectivity - Ethernet-based LAN port and traditional
RS485, mainly for Modbus TCP or Modbus RTU communication. For wireless connectivity, there are 3x mini-PCIe sockets which can support optional
wireless modules for IoT applications, for example, Wi-Fi, Bluetooth, 3.5G and 4G LTE module. NISE 50 is definitely the best choice for M2M intelligent
system as an intelligent IoT gateway.
ŒŒ Default: onboard Intel® Atom™ processor E3826 Dual Core, 1.46GHz
ŒŒ Option: support Intel® Atom™ processor E3845 Quad Core, 1.91GHz
(by request)
174.00
186.00
ŒŒ 1 x RS232, 1 x RS232 (only Tx/Rx/GND), 1 x RS422/485 with auto
flow control
ŒŒ Support -5 ~ 55 degree C operating temperature
ŒŒ Support 24V DC input
26.00
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Intel® Atom™ Processor E3826 Dual Core fanless system,
with on-board 16GB EMMC and 2G DDR3L RAM
ŒŒ 24V, 60W AC/DC power adapter w/o power cord
(P/N: 7400060033X00)
Expansion Slot
ŒŒ 3 x Mini-PCIe socket for optional Wi-Fi/3.5G modules
Mini-PCIe
Size
USB
PCIe
mSATA
CN5
Full
v
N/A
Support
CN6
Full
v
v
N/A
CN7
Half
v
v
N/A
3.5G/4G
Support
Support
N/A
Power Requirements
ŒŒ Power input: 24V DC +/-20%
ŒŒ 1 x optional 24V, 60W power adapter
Industrial Network and Cloud Product Selection Guide
17
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
Industrial IoT Security
The Industrial Firewall
Series
The IFA series consists of three all-round
Featuring stateful edge firewall protection, NEXCOM industrial
deep packet inspection to identify malicious codes disguised in
Network Security
legitimate packets, but also screen out suspicious inquires by keeping
 Stateful Packet Firewall
 Intrusion Prevention
 SNMP Support
 Portscan Detection
track of connection status. Additionally, the NAT conversion feature
Increasingly, industrial facilities, systems, and equipment are connecting to the
broadband-compatible multi-port industrial
network with the aim to improve operational efficiency. To promote continuous
firewalls/VPN routers loaded with advanced
improvements, NEXCOM has expanded its offerings with the HENGE™ family
technologies for stateful packet inspection
which is made up of industrial firewalls of the IFA series, VPN dispatcher
(SPI), denial-of-service (DoS)/dynamic-
IVD 1000, and the extremely rugged network-attached storage iNAS 330. The
denial-of-service (Dynamic DoS) protection,
family features rich function sets, expandability, and rugged design. It is with
intrusion detection, port scanning
Increase Operational Efficiency
ease that users can tap into built-in functions and have secure remote access,
detection, and real-time alerts. To arm
Remote access and data acquisition are of paramount importance in
simplified private network tunneling, reliable connections, stateful edge firewall
industrial systems with extra shields, the IFA
strengthening operational efficiency, winning a bigger market share,
protection, intrusion prevention protection, and robust data storage at once. To
series is equipped with IPsec and SSL VPN
differentiating an enterprise from competitors, and more. However,
sum up, the high level of function integration of the HENGE™ family makes it one
protection to provide secure remote access
industrial process control networks were narrow-band closed-loop
of indispensable network communications and security solutions in industrial
and simplify VPN tunnel management for
networks that are not suited for remote access, let alone remote
automation applications (Figure 1).
industrial system vendors to remotely and
system monitoring and inspection. Thanks to the proliferation and
safely communicate with and manage their
cost reduction of Ethernet, VPN, and other networking technologies,
products installed on clients’ premises.
vendors and system integrators of automation systems can take
Furthermore, the rugged design of the IFA
advantage of remote access to reduce unexpected system downtime
series can withstand rigorous challenges of
and travel time and costs related to onsite services. The technologies
harsh operating environments. It is worth
also provide benefits of ease of installation and integration, better
mentioning that the IFA series can operate
network expandability, and a leaner cost structure.
Figure 1. Industrial IoT security architecture.
enables the IFA series to prevent malicious codes from accessing
IVD 1000
VPN Dispatcher
-20 degrees Celsius to 70 degrees Celsius.
SCADA
True SSL/TLS VPN
system breakdowns and information leaks.
IFA 3610
IFA 2610
IFA 1610
Managed Switch
IoT Gateway
Applied
Panel PC
Modbus/TCP
Devices
CPS 200
Fieldbus
Designed with remote system monitoring and inspection in mind,
Equipped with full SSL VPN functionality—
tunnels (Figure 2). Leveraging a combination of tunneling, data
VPN server and VPN client, the IFA series
encryption and decryption, key management, and authentication
can secure network connections and
technologies, the IFA series can easily build a virtual private
communications for high-value on-premises
channel on a public or private network so VPN gateways and field
automation systems used in industrial
devices can securely connect to a network to allow for real-time,
automation, process control, power station,
 VPN Client-to-Site
 Support for VPN over HTTPS
Proxy (Open VPN)
 VPN Client for Microsoft®
Windows®, Mac® OS X and Linux
 Multiple Logins per User
 VPN Failover
IPSec
 Encryption: 3DES, AES b128/
256-bit, MD5, SHA1
 Diffie Hellman
(2,5,14,15,16,17,18)
 Authentication:Pre-Shared Key,
RSA Keys X.509-Certificates IKEv1
 L2TP
 DPD (Dead Peer Detection)
 NAT-Traversal
 Compression
 PFS (Perfect Forward Secrecy)
 VPN Site-to-Site
 VPN Client-to-Site (Road Warrior)
 Integrated Certificate Authority
Logging and Reporting
 Network/System/Performance Statistics
 Real-Time Dashboard
 Rule-Based Logging Settings (Firewall Rules)  Event Handling and Notification
 Syslog: Local or Remote
 Live Log Viewer
remote monitoring and data acquisition.
Network Address
Translation
Update and
Backup
 Destination NAT
 One-to-One NAT
 Source NAT (SNAT)
 IPSec NAT Traversal
 Scheduled Automatic
Backup
 Instant Recovery/
Backup to USB Stick
Bridging
 Firewall Stealth Mode
w/ Bypass Function
 OSI-Layer 2
Firewall-Function
 Spanning Tree
and medical inspection applications.
CPS 100
Modbus/TCP
NISE 50
NIO 50
Ethernet
Protect Critical Assets
Against Cyber Threats
Connect with Simplicity, Efficiency & Security
Private
VPN Dispatcher
IFA@Rome
Giving consideration to the urge for remote access and an
To kick business into higher gear, energy
companies are contemplating the possibility
of incorporating the internet technology in
Internet
Private
Internet
IFA@Tokyo
Up to
100
Private
VPN Client
IFA@Chicago
expandable system architecture, NEXCOM VPN dispatcher HENGE™
IVD 1000 can support up to 100 IFAs, short- and long-range network
connections, and public and hybrid networks. The IVD 1000 simplifies
their infrastructure in the hope to automate
Small Scale Deployment
Middle Scale Deployment
the management of user accounts and authorization, creation and
operational processes, consolidate
 IFA Series (Less than 10 pcs)
 IVD + IFA Series (Up to 100 pcs)
maintenance of VPN tunnels, and connection management, giving
solutions, and improve efficiency. However,
 VPN Client for Windows®, Mac®
 VPN Client for Windows®, Mac®
users high system flexibility and manageability.
the pace of internet adoption in the
Figure 2. Secure remote access with VPN tunneling.
industrial sector has been slow because
common IT network security solutions can
The Industrial Network-Attached
Storage Series
neither survive electrical environments
Endure Harsh Environments
nor meet operational requirements, and
It is worth mentioning that the IFA 3610 is a high-end model which
therefore expose critical industrial systems
can operate over an extended temperature range from -20 degrees
NEXCOM iNAS 330 is an network-attached storage (NAS) offering
and equipment to malicious software and
Celsius to 70 degrees Celsius.
high availability with rugged design, RAID support, and buffer cache.
security risks. Compounding the problem
18
 Encryption: DES, 3DES,
AES 128/192/256-bit, CAST5,
Blowfish
 Authentication: Pre-Shared Key,
X.509-Certificates, Certification
Authority, and Local
 PPTP Passthrough
the SSL VPN-equipped IFA series can provide private network
Wi-Fi AP
Industrial
Firewall
 DoS and DDoS Protection
 SYN/ICMP Flood Protection
 VLAN Support (IEEE802.1Q)
mission-critical networked industrial equipment, reducing the risks of
over an extended temperature range from
Engineer
IFA Features
firewalls/VPN routers IFA 3610, 2610, and 1610 can not only perform
With the incremental growth of distributed computing in industrial
is cross infection of virus spread by USB
The IFA series is designed with features including advanced
applications, the need for safe reliable data storage units on the field
devices. With severe ramifications like
stateful firewall, intrusion detection, IP forwarding, NAT, industrial
is surging because data needs to be well kept until sent to a cloud
power outage proven in some cases,
protocol filters, secure virtual tunneling, and ease of installation
platform for further processing. From the hardware perspective,
precautions must be considered in the early
and maintenance. Therefore, the IFA series is an ideal solution to
such storage units must have redundant routing and power supply,
stages of planning.
industrial network communications.
extended operating temperature range, water and dust resistance,
19
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
and anti-vibration protection. As to data availability, an NAS must support RAID
configuration, buffer cache, and redundant network access. Meeting all requirements,
Product Selection Guide
iNAS Features
the iNAS 330 is an ideal choice for industrial applications of oil and gas, water treatment,
Link Aggregation
and traffic control, for instance among others.
 Balance-rr
High Performance, Reliability, Capacity & Endurance
 Active Backup  Balance-tlb
 Balance-xor  Balance-alb
 Broadcast
 RAID 0
 RAID 1
 RAID 5
Model Name
high data integrity with RAID 0/1/5 support, while the internal buffer cache can keep
Firmware Upgrade
Backup Solutions
Photo
writing data into the iNAS 330 even when hard drives cease to function in distress. When
 Via System Web UI
 Remote Backup
 IEEE 802.3ad
Raid Level
 JBOD
Industry Firewall Multi-port VPN Router
IFA 1610
IFA 2610
IFA 3610
VPN Dispatcher
Model Name
Rugged Industry
Network-Attached Storage
IVD 1000-S/A
iNAS 330
The iNAS 330 can accommodate up to three hard drives to store 3TB of data or to deliver
 System Configuration
configured for network redundancy, the iNAS 330 can prevent network access from being
affected by a single component failure. Furthermore, the iNAS series provides many data
FTP/SAMBA/AFP/ACL
Backup (Stage II)
backup and recovery options. Users can opt to backup data to local RAID systems, create
remote replication, and transfer batch files to FTP servers; all methods serve the purpose
of remote data backup. To facilitate the data backup process, the iNAS 330 uses rsync
commands to help users choose from mirror backup and incremental backup according to
applications’ needs. As different backup methods and cycles would have different effects
on data recovery schemes, avoiding data loss takes both thoughtful evaluation and solid
execution. The iNAS 330 is a trustworthy data storage solution to ensure data backup and
recovery plans fall into place.
Lastly, the iNAS 330 has a rugged design which has been a hallmark of NEXCOM products.
It is compliant with standards for railway applications, such as EN 50155 and EN 61373,
AES Volume Encryption
 Yes (Stage II)
Client O.S. Support
 Windows 7+
 Windows Server 2003 R2
 Windows Server 2008,
2008 R2 & 2012 or Later
 Linux & UNIX
 Mac OS X 10.7 or Later
Green Power
Management
Web Browsers
Support
 Internet Explorer
IE 9.0 Later
 Mozilla Firefox
 Apple Safari
 Google Chrome
and incorporates M12 connectors to offer the IP54 level of water and dust resistance.
Networking Support
Supporting various file transfer protocols of network communications, the iNAS 330
answers the need for data storage spawned by the growing proliferation of distributed
computing. The bottom line is that the iNAS 330 is easy to deploy and can reliably operate
in harsh operating environments faced by industrial automation solutions, railway
 HTTP/HTTPS
 Samba/CIFS
 NFSv4
 AFP (v3.3)
 SNMP (v3)
 TCP/IP
 FTP
 TLS 1.0
 TLS 1.2
 IPv4/IPv6
 IEEE 802.3x
Network
Security
VPN
Connections
Vulnerability Assement
Questions that every plant manager has: We are expanding
production with an estimate of hundreds of PC-based programmable
logic controllers (PLCs) which would download manufacturing
process software over the network. We are concerned about
potential security risks. What should we do?
Q
: Expert advice to the question is using vulnerability assessment
(VA) services. Despite the benefits of going online, being
connected also increases the possibilities of getting attacked. There
are a variety of automated malicious programs on the internet that
can trigger all kinds of attacks, for instance denial of service and
backdoor intrusion.
In this regard, VA services offer to scan service ports—including
HTTP, SSH, and Windows Update—on networked equipment and
produce VA reports. Thanks to ubiquitous network infrastructure,
VA services present as a reliable and quick interface medium for all
kinds of systems for remote management, system monitoring, data
acquisition, and contingency actions.
A
: Two major operating systems (OSs) used by industrial
automation and control equipment are Windows and
Open Linux. These general-purpose OSs activate service ports by
default. However, not all equipment is protected and therefore
exposed to security loopholes like unchanged default factory
passwords and security exploits in known versions of operating
systems.
Using VA tools offered by world-renowned vendors, such as
Qualys, users can perform VA by taking four simple steps (Figure 3).
Compared with complex penetration tests, VA services are a fast and
economical way to assess systemic risks.
■■ Connect target devices to the network
■■ Initiate VA services
■■ Set VA schedules
■■ Receive VA reports
Figure 3. Vulnerability assessment processes.
20
A report of IP device,
single scan
Client receive
VA reports
Unlimited
Unlimited
Unlimited
25/100 Licenses
Hardware Specification
CPU/Memory
ARM® Dual Cortex®-A9 CPU;
Onboard 4G eMMC;
512MB DDRIII
Disk/
Max Capacity
Up to 3 x 2.5" HDD/SSD;
Up to 3T
LAN Bypass
-
-
Yes
Yes
High Availability
-
Yes
Yes
Yes
WAN Failover
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Wall Mount/
Desktop
Wall Mount/
DIN Rail
Wall Mount/
DIN Rail
Rack Mount
24V DC Terminal/
DC Jack Input
24V DC Input
Dual 24V
DC Input
65W
Power Supply
ARM®
Cortex™ A8
ARM®
Cortex™ A8
ARM®
Cortex™ A8
Intel® Atom™
Memory
512MB
512MB
512MB
1GB
Ethernet
2 x 110/100/1000
Mbps
3 x 10/100/1000
Mbps
5 x 10/100/1000
Mbpsx
6 x 10/100/1000
Mbps
RS232/485/422
RS232/485/422
RS232/485/422
Console Port
2 x USB
1 x USB
1 x USB
2 x USB
-
1 x D1/1 x DO
1 x D1/1 x DO
-
Storage
MicroSD 4GB
MicroSD 4GB
MicroSD 4GB
2.5” HDD (RAID)
Cooling
Fanless
Fanless
Fanless
-
Dimension
(H x W x D) mm
114 x 28 x 100
167 x 59 x 140
167 x 59 x 140
44 x 462 x 238
Operating
Temperature
0°C ~ +60°C
32°F ~ +140°F
0°C~ +60°C
32°F ~ +140°F
-20°C~ +70°C
-4°F ~ +158°F
0°C ~ +40°C
32°F ~ +104°F
Storage
Temperature
-20°C ~ +70°C
-4°F ~ +158°F
-20°C ~ +70°C
-4°F ~ +158°F
-40°C~ +80°C
-40°F ~ +176°F
-20°C ~ +70°C
-4°F ~ +158°F
Operating
10% ~ 90%,
Non-Condensing
Operating
5% ~ 95%,
Non-Condensing
Operating
5% ~ 95%,
Non-Condensing
Operating
10% ~ 90%,
Non-Condensing
Regulation
-
Yes
Yes
-
Compliance
3 Years
3 Years
3 Years
3 Years
*EN50155 (Railway Applications);
IEC61373 (Vibrations & Shocks);
EN60950
*EN61000 (Immunity, Emission);
EN60068-2-32/IEC68-2-32
(Environmental Testing)
UL 508
UL 508
UL 508
UL
Certification
*FCC/CE/RoHS/WEEE
CE/FCC/RoHS
CE/FCC/RoHS
CE/FCC/RoHS
CE/FCC/RoHS
IP 30
IP 30
IP30
-
10IF0161000X0
10IF0261000X0
10IF0361000X0
TBD
Network
Address
Translation
Routing
Logging/
Reporting
Updates and
Backup
Centralized
Management
LEDs
Mounting
Serial
Communication
USB
Digital Input/
Output
Relative
Humidity
SIM Card Holder
Service &
Maintenance
Power LED/System LED/PoE/
Temp LED/HDD LED/LAN LED
2 x Gigabit LAN Ports
for Data & PoE Redundancy (M12)
Ethernet
1 x Gigabit LAN Port
for Management (M12)
Power Supply
PoE (IEEE 802.3af)/
PoE+ (IEEE 802.3at)
Reset Button
Reset to Factory Default
(Pressing and Holding
the Reset Button for 5 Seconds
will Reset to Factory Default)
Hardware Specification
System
Dimensions
(H x W x D) mm
60 x 246 x 194
(2.36" x 9.69" x 7.64")
Vibration/
Tem. Protection
Yes
Heating Solution
Yes
Housing
Metal, Aluminum, Fanless
Mounting
Wall Mount Kit (Optional)
Environmental
Limits
Service &
Maintenance
Operating Temperature:
-40°C ~+70°C (-40°F ~+158°F) For SSD
-25°C ~+55°C (-13°F ~+131°F) For HDD
Storage Temperature:
-40°C ~+85°C (-40°F ~+176°F)
Humidity: 5% ~ 95%, Non-Condensing
3 Years
Regulation
Certification
Initiate/schedule VM scan
(One scan for one device)
Yes
VPN
Management
Protection Class
Internet
Yes
Client/
Site-to-Site
Safety
Connect target device/
host to network
Yes
Client/
Site-to-Site
CPU
VA services can be carried out before factory expansion to remotely
appraise security risks. Also, VA services can be performed on
existing systems to spot security loopholes if there is any. Either way,
assessing security risks help increase system reliability and availability.
Yes
Client/
Site-to-Site
VPN Function
Power Input
applications, alternative energy management systems, and the oil and gas industry.
Photo
Ordering
Information
IP Rating
Ordering
Information
IP 54 (NEMA)
101G0033000X0*
*Available in Q4
21
IFA 1610
CoreFort™ Industry Firewall, 2 Ports VPN Router
Dimension Drawing
100.2
18.8
28
4.6
113.8
3.4
18.5
Main Features
ŒŒ Stateful (L4) packet firewall
ŒŒ Intrusion prevention (IPS)
ŒŒ SSL VPN secure remote access
ŒŒ Serial gateway (RS485)
ŒŒ Operating temperature range, from 0°C (32°F) up to 60°C (140°F)
ŒŒ Compact palm size
Product Overview
The CoreFort™ industry firewall series is a fully integrated industry 2 ports firewall router with VPN function. The fully equipped, broadband-capable
firewall router offers a stateful packet inspection firewall, denial-of-service(DoS)/distributed denial-of-service(DDoS) protection and intrusion prevention,
portscan detection, and real-time alerts. It gives additional protection for machinery and equipment installed on the secure side of the firewall. Equipped
with SSL VPN functions, the CoreFort™ industry firewall provides a remote access infrastructure to secure connections, and helps machine builder/system
integrator to design easily maintained systems. Furthermore, its full-industrial design is ideal for industrial environment application.
Pairing VPN capabilities, the CoreFort™ industry firewall series is an ideal endpoint connectivity and security solution for industrial automation, process
control, energy and medical instrument remote management application.
ŒŒ True SSL/TLS VPN (OpenVPN)
-- Encryption: DES, 3DES, AES 128/192/256-bit, CAST5, Blowfish
-- Authentication: Pre-shared key, X.509-certificates, certification
authority, and local
-- Support for VPN over HTTPS proxy (OpenVPN)
-- PPTP passthrough
-- VPN: site-to-site
-- VPN: client-to-site (road warrior)
-- VPN client for Microsoft Windows, Mac OS X and Linux
-- Multiple logins per user
Services
Specifications
Network Security
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Stateful packet firewall
Intrusion detection/prevention (IDS/IPS)
Multiple public IPs
SNMP support (V1/V2/V3)
VoIP/SIP support
Portscan detection
DoS and DDoS protection
SYN/ICMP flood protection
DNS proxy/routing
WAN
ŒŒ Supports uplinks/WANs: Ethernet (Static/DHCP), PPPoE
Traffic Shaping
ŒŒ Bandwidth management
User Authentication
ŒŒ Active directory/NTLM
ŒŒ LDAP
ŒŒ Local
Network Address Translation
ŒŒ Destination NAT
ŒŒ Incoming routed traffic
22
Industrial Network and Cloud Product Selection Guide
ŒŒ One-to-one NAT
ŒŒ Source NAT (SNAT)
ŒŒ IPSec NAT Traversal
Bridging
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Firewall stealth mode
OSI-layer 2 firewall-function
Spanning tree
Unlimited bridges
Unlimited interfaces per bridge
VPN (Virtual Private Network)
ŒŒ IPsec
-- Encryption: 3DES, AES 128/256-bit,MD5, SHA1
-- Diffie Hellman (2, 5, 14, 15, 16,17,18)
-- Authentication: Pre-shared key, RSA keys X.509-certificates IKEv1,
L2TP
-- DPD (dead peer detection)
-- NAT Traversal
-- Compression
-- PFS (perfect forward secrecy)
-- VPN: site-to-site
-- VPN: client-to-site (road warrior)
-- Integrated certificate authority
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Event notification & handling
NTP (network time protocol)
DHCP server
SNMP server
DynDNS
Logs and Reports
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Customizable real-time dashboard
Live log viewer (AJAX based)
Detailed user based web access report
Network/system/performance statistics
Rule-based logging settings (firewall rules)
Syslog: local or remote
openTSA trusted time stamping
Management
ŒŒ Easy web-based administration (SSL)
ŒŒ Secure remote SSH/SCP access
ŒŒ Centralized management (via SSL)
Updates and Backup
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Hardware Specification
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
1 x 10/100/1000 Base-T Ethernet WAN
1 x 10/100/1000 Base-T Ethernet LAN
2 x USB
RS232/422/485
microSD 4GB
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
DIN rail/wall mount (optional)/desktop
Fanless
Dimension(H x W x D): 110 x 25.4 x 100mm
Weight (G.W. Kg): 0.51 Kg
IP30
DC Jack/terminal block ,24V DC
Environmental Specification
ŒŒ Operating temperature: 0°C ~ 60°C (32°F ~ 140°F)
ŒŒ Storage temperature: -20°C ~ 70°C (-4°F ~ 158°F)
ŒŒ Humidity: 10% ~ 90%, non-condensing
Certification
ŒŒ Safety: UL 508
ŒŒ FCC/CE/RoHS
Package Content
ŒŒ IFA1610 x 1
ŒŒ QIG x 1
ŒŒ Power input 5.08mm terminal block x 1
Ordering Information
ŒŒ IFA 1610 (P/N: 10IF0161000X0)
Industry firewall 2 ports VPN router (3 years service & maintenance)
Centralized updates through CoreFort™ network
Scheduled backup
Encrypted backups via e-mail
Instant recovery/backup to USB stick
Industrial Network and Cloud Product Selection Guide
23
IFA 2610
CoreFort™ Industry Firewall, 3 Ports VPN Router with Rugged Design
Dimension Drawing
139.8
58.79
7.9
167
52.62
7.9
64.38
9
Main Features
ŒŒ Stateful (L4) packet firewall
ŒŒ Intrusion prevention (IPS)
ŒŒ SSL VPN secure remote access
ŒŒ DI/DO support
ŒŒ Serial gateway (RS485)
ŒŒ Versatile logging & report system
Product Overview
The CoreFort™ industry firewall series is a fully integrated industry 3 ports firewall router with VPN function. The fully equipped, broadband-capable
firewall router offers a stateful packet inspection firewall, denial-of-service(DoS)/distributed denial-of-service(DDoS) protection and intrusion prevention,
portscan detection, and real-time alerts. It gives additional protection for machinery and equipment installed on the secure side of the firewall. Equipped
with SSL VPN functions, the CoreFort™ industry firewall provides a remote access infrastructure to secure connections, and helps machine builder/system
integrator to design easily maintained systems. Furthermore, its tough fully-rugged design is ideal for harsh environment application.
Pairing VPN capabilities, the CoreFort™ industry firewall series is an ideal endpoint connectivity and security solution for industrial automation, process
control, energy and medical instrument remote management application.
Specifications
Network Security
Network Address Translation
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Stateful packet firewall
Intrusion detection/prevention (IDS/IPS)
Multiple public IPs
SNMP support (V1/V2/V3)
VoIP/SIP support
Portscan detection
DoS and DDoS protection
SYN/ICMP flood protection
DNS proxy/routing
Multi-WAN/Failover
ŒŒ Supports multiple uplinks/WANs: Ethernet (Static/DHCP), PPPoE,
Analog/UMTS modem
ŒŒ Automatic WAN uplink failover
ŒŒ Monitoring of WAN uplinks
Traffic Shaping
ŒŒ Bandwidth management
User Authentication
ŒŒ Active directory/NTLM
ŒŒ LDAP
ŒŒ Local
24
Industrial Network and Cloud Product Selection Guide
Destination NAT
Incoming routed traffic
One-to-one NAT
Source NAT (SNAT)
IPSec NAT Traversal
High Availability
ŒŒ Hot standby (active/passive)
ŒŒ Node data/configuration synchronization
Bridging
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Firewall stealth mode
OSI-layer 2 firewall-function
Spanning tree
Unlimited bridges
Unlimited interfaces per bridge
VPN (Virtual Private Network)
ŒŒ IPsec
-- Encryption: 3DES, AES 128/256-bit,MD5, SHA1
-- Diffie hellman (2, 5, 14, 15, 16,17,18)
-- Authentication: Pre-shared key, RSA keys X.509-certificates IKEv1, L2TP
-- DPD (dead peer detection)
-- NAT Traversal
-- Compression
-- PFS (perfect forward secrecy)
-- VPN: site-to-site
-- VPN: client-to-site (road warrior)
-- Integrated certificate authority
ŒŒ True SSL/TLS VPN (OpenVPN)
-- Encryption: DES, 3DES, AES 128/192/256-bit, CAST5, Blowfish
-- Authentication: Pre-shared key, X.509-certificates, certification
authority, and local
-- Support for VPN over HTTPS proxy (OpenVPN)
-- PPTP passthrough
-- VPN: site-to-site
-- VPN: client-to-site (road warrior)
-- VPN: client for Microsoft Windows, Mac OS X and Linux
-- Multiple logins per user
-- VPN failover
Services
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Event notification & handling
NTP (network time protocol)
DHCP server
SNMP server
DynDNS
Logs and Reports
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Customizable real-time dashboard
Live log viewer (AJAX based)
Detailed user based web access report
Network/system/performance statistics
Rule-based logging settings (firewall rules)
Syslog: local or remote
openTSA trusted time stamping
Management
ŒŒ Easy Web-based administration (SSL)
ŒŒ Secure remote SSH/SCP access
ŒŒ Centralized management (via SSL)
Updates and Backup
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Centralized updates through CoreFort™ network
Scheduled backup
Encrypted backups via e-mail
Instant recovery/backup to USB stick
Routing
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Static routes
Source-based routing
Destination-based routing
Policy-based routing (based on interface, MAC, protocol, or port)
Hardware Specification
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
x 10/100/1000 Base-T Ethernet WAN
1
2 x 10/100/1000 Base-T Ethernet LAN
1 x USB
1 x DI/DO
RS-232/422/485
microSD 4GB
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
DIN rail/wall mount (optional)
Fanless
Dimension (H x W x D): 167 x 59 x 140mm
Weight (G. W. Kg): 1.90Kg
IP30
Terminal block,24V DC
Environmental Specification
ŒŒ Operating temperature: 0°C ~ 60°C (32°F ~ 140°F)
ŒŒ Storage temperature: -20°C ~ 70°C (-4°F ~ 158°F)
ŒŒ Humidity: 5% ~ 95%, non-condensing
Certification
ŒŒ Safety: UL 508
ŒŒ FCC/CE/RoHS
Package Content
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IFA 2610 x 1
QIG x 1
Power Input 5.08mm terminal block x 1
DI/DO terminal block x 1
Ordering Information
ŒŒ IFA 2610 (P/N: 10IF0261000X0)
Industry firewall 3 ports VPN router (3 years service & maintenance)
Industrial Network and Cloud Product Selection Guide
25
IFA 3610
CoreFort™ Industry Firewall, 5 Ports VPN Router with Wide Temperature Range
Dimension Drawing
139.8
58.79
7.9
167
52.62
7.9
64.38
9
Main Features
ŒŒ Stateful (L4) packet firewall
ŒŒ Intrusion prevention (IPS)
ŒŒ SSL VPN secure remote access
ŒŒ DI/DO support
ŒŒ Serical gateway (RS485)
ŒŒ Wide temperature range, up to 70°C (158°F)
Product Overview
The CoreFort™ industry firewall series is a fully integrated industry multi-port firewall router with VPN function. The fully equipped, broadband-capable
firewall router offers a stateful packet inspection firewall, denial-of-service(DoS)/distributed denial-of-service(DDoS) protection and intrusion prevention,
portscan detection, and real-time alerts. It gives additional protection for machinery and equipment installed on the secure side of the firewall. Equipped
with SSL VPN functions, the CoreFort™ industry firewall provides a remote access infrastructure to secure connections, and helps machine builder/system
integrator to design easily maintained systems. Furthermore, its tough fully-rugged design is ideal for harsh environment application. With wide temperature
range up to to 70°C (158°F) degree, it offers reliable communication network in extreme temperature conditions.
Pairing VPN capabilities, the CoreFort™ industry firewall series is an ideal endpoint connectivity and security solution for industrial automation, process
control, energy and medical instrument remote management application.
Specifications
Network Security
Network Address Translation
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Stateful packet firewall
Intrusion detection/prevention (IDS/IPS)
Multiple public IPs
SNMP support (V1/V2/V3)
VoIP/SIP support
Portscan detection
DoS and DDoS protection
SYN/ICMP flood protection
DNS proxy/routing
Multi-WAN/Failover
ŒŒ Supports multiple uplinks/WANs: Ethernet (static/DHCP),
PPPoE, Analog/UMTS modem
ŒŒ Automatic WAN uplink failover
ŒŒ Monitoring of WAN uplinks
Traffic Shaping
ŒŒ Bandwidth management
User Authentication
ŒŒ Active directory/NTLM
ŒŒ LDAP
ŒŒ Local
26
Industrial Network and Cloud Product Selection Guide
Destination NAT
Incoming routed traffic
One-to-one NAT
Source NAT (SNAT)
IPSec NAT Traversal
High Availability
ŒŒ Hot standby (active/passive)
ŒŒ Node data/configuration synchronization
Bridging
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Firewall stealth mode
OSI-layer 2 firewall-function
Spanning tree
Unlimited bridges
Unlimited interfaces per bridge
VPN (Virtual Private Network)
ŒŒ IPsec
-- Encryption: 3DES, AES 128/256-bit,MD5, SHA1
-- Diffie hellman (2, 5, 14, 15, 16,17,18)
-- Authentication: Pre-shared key, RSA keys X.509-certificates IKEv1, L2TP
-- DPD (dead peer detection)
-- NAT-Taversal
-- Compression
-- PFS (perfect forward secrecy)
-- VPN: site-to-site
-- VPN: client-to-site (road warrior)
-- Integrated certificate authority
ŒŒ True SSL/TLS VPN (OpenVPN)
-- Encryption: DES, 3DES, AES 128/192/256-bit, CAST5, Blowfish
-- Authentication: Pre-shared key, X.509-certificates, certification
authority, and local
-- Support for VPN over HTTPS proxy (OpenVPN)
-- PPTP passthrough
-- VPN: site-to-site
-- VPN: client-to-site (road warrior)
-- VPN: client for Microsoft Windows, Mac OS X and Linux
-- Multiple logins per user
-- VPN failover
Services
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
vent notification & handling
E
NTP (network time protocol)
DHCP server
SNMP server
DynDNS
Logs and Reports
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ustomizable real-time dashboard
C
Live log viewer (AJAX based)
Detailed user based web access report
Network/system/performance statistics
Rule-based logging settings (firewall rules)
Syslog: local or remote
OpenTSA trusted time stamping
Management
ŒŒ Easy web-based administration (SSL)
ŒŒ Secure remote SSH/SCP access
ŒŒ Centralized management (via SSL)
Updates and Backup
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
entralized updates through CoreFort™ network
C
Network
Scheduled backup
Encrypted backups via e-mail
Instant recovery/backup to USB stick
Routing
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Static routes
Source-based routing
Destination-based routing
Policy-based routing (based on interface, MAC, protocol, or port)
Hardware Specification
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
x 10/100/1000 Base-T Ethernet WAN
1
4 x 10/100/1000 Base-T Ethernet LAN
1 x USB
1 x DI/DO
RS-232/422/485
microSD 4GB
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IN rail/wall mount (optional)
D
Fanless
Dimension (H x W x D): 167mm x 59mm x 140mm
Weight (G. S. Kg):1.90Kg
IP30
Dual power input 24VDC
Environmental Specification
ŒŒ O
perating temperature: -20°C ~ 70°C/-4°F ~ 158°F
ŒŒ Storage temperature: -40°C ~ 80°C/-40°F ~ 176°F
ŒŒ Humidity: 5% ~ 95%, non-condensing
Certification
ŒŒ Safety: UL 508
ŒŒ FCC/CE/RoHS
Package Content
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IFA 3610 x 1
QIG x 1
Power Input 5.08mm terminal block x 2
DI/DO terminal block x 1
Ordering Information
ŒŒ IFA 3610 (P/N: 10IF0361000X0)
Industry firewall 5 ports VPN router (3 years service & maintenance)
Industrial Network and Cloud Product Selection Guide
27
IVD 1000
CoreFort™ VPN Dispatcher 25/100 Licenses
ŒŒ True SSL/TLS VPN (OpenVPN)
-- Encryption: DES, 3DES, AES 128/192/256-bit, CAST5, blowfish
-- Authentication: Pre-shared key, X.509-certificates, certification
authority, and local
-- Support for VPN over HTTPS proxy (openVPN)
-- PPTP passthrough
-- VPN: client-to-Site (road warrior)
-- VPN: client for Microsoft Windows, Mac OS X and Linux
-- Multiple logins per user
-- VPN failover
Services
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Event notification & handling
NTP (network time protocol)
DHCP server
SNMP server
DynDNS
Logs and Reports
Main Features
ŒŒ Fully-integrated VPN server
ŒŒ Stateful (L4) packet firewall
ŒŒ SSL VPN secure remote access
ŒŒ Serial gateway (RS485)
ŒŒ Up to 25/100 concurrent licenses
ŒŒ Redundant storage (RAID1)
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Customizable real-time Dashboard
Live log viewer (AJAX based)
Detailed user based web access report
Network/system/performance statistics
Rule-based logging settings (firewall rules)
Syslog: local or remote
openTSA trusted time stamping
Management
ŒŒ Easy web-based administration (SSL)
ŒŒ Secure remote SSH/SCP access
ŒŒ Centralized management (via SSL)
Updates and Backup
Product Overview
With the CoreFort™ VPN Dispatcher, users can define and manage network connections with extreme flexibility, adapting them to suit the specific needs,
like create multiple and distributed networks using VPN gateway to gateway and enable remote connections to your network and take advantage of the
intuitive VPN client, which is universally compatible with Windows, Mac OS X and Linux…and so on.
ŒŒ
ŒŒ
ŒŒ
ŒŒ
entralized updates through CoreFort™ network
C
Scheduled backup
Encrypted backups via e-mail
Instant recovery/backup to USB Stick
Routing
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Static routes
Source-based routing
Destination-based routing
Policy-based routing (based on interface, MAC, protocol, or port)
Hardware Specification
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Intel® Atom™ CPU
6 x 10/100/1000 Base-T Ethernet
2 x USB
1 x Console port
2 x 2.5" HDD (RAID1)
Physical and Power
ŒŒ Rack mount
ŒŒ Dimension (H x W x D): 44mm x 426mm x 238mm
ŒŒ 100W ATX power supply
Environmental Specification
ŒŒ Operating temperature 0°C - 40°C (32°F - 104°F)
ŒŒ Storage temperature -20°C - 70°C (-4°F - 158°F)
ŒŒ Humidity: 10% - 90%, non-condensing
Certification
ŒŒ FCC/CE/RoHS
Package Content
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IVD1000-S/A x 1
QIG x 1
Power cord
Rack mount kit
Ordering Information
ŒŒ IVD 1000-S (P/N: TBD)
VPN dispatcher server with 25 licenses stateful packet firewall,
SSL VPN, unified VPN management (3 years services & maintenance)
Specifications
Network Security
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Stateful packet firewall
Intrusion detection/prevention (IDS/IPS)
Multiple public IPs
SNMP support (V1/V2/V3)
VoIP/SIP support
Portscan detection
DoS and DDoS protection
SYN/ICMP flood protection
DNS proxy/routing
Multi-WAN/Failover
ŒŒ Supports multiple uplinks/WANs:
Ethernet (Static/DHCP), PPPoE, Analog/UMTS modem
ŒŒ Automatic WAN uplink failover
ŒŒ Monitoring of WAN uplinks
Traffic shaping
ŒŒ Bandwidth management
User Authentication
ŒŒ Active directory/NTLM
ŒŒ LDAP
ŒŒ Local
Network Address Translation
ŒŒ Destination NAT
ŒŒ Incoming routed traffic
28
Industrial Network and Cloud Product Selection Guide
ŒŒ O
ne-to-one NAT
ŒŒ Source NAT (SNAT)
ŒŒ IPSec NAT traversal
High Availability
ŒŒ Hot standby (active/passive)
ŒŒ Node data/configuration synchronization
Bridging
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Firewall stealth mode
OSI-layer 2 firewall-function
Spanning tree
Unlimited bridges
Unlimited interfaces per bridge
VPN (Virtual Private Network)
ŒŒ IPsec
-- Encryption: 3DES, AES 128/256-bit,MD5, SHA1
-- Diffie hellman (2, 5, 14, 15, 16,17,18)
-- Authentication: Pre-shared key, RSA keys X.509-certificates IKEv1,
L2TP
-- DPD (dead peer detection)
-- NAT Traversal
-- Compression
-- PFS (perfect forward secrecy)
-- VPN: site-to-site
-- VPN: client-to-site (road warrior)
-- Integrated certificate authority
Industrial Network and Cloud Product Selection Guide
29
iNAS 330
CoreVault™ Rugged-Design Industry Storage
Dimension Drawing
66.00
60.00
194.00
246.00
25.00
120.00
160.00
6.00
34.90
Main Features
ŒŒ Wide temperature range support, -40°C~70°C
ŒŒ IP rating: IP 54 (NEMA)
ŒŒ Max capacity: Up to 3T
Product Overview
206.00
4.00
Compliance
The iNAS 330 is extremely rugged-design network-attached storage (NAS), which was designed to provide high performance, reliability and capacity data
storage in harsh environments. Equipped with a unique storage technology, it is able to record the accurate data in harsh environments, such as Oil & Gas,
Transportation, and Industrial automation…and so on.
ŒŒ EN50155 (railway applications)
ŒŒ IEC61373 (vibrations & Shocks)
ŒŒ EN60950; EN61000 (immunity, emission)
ŒŒ Backup management
-- Green power management
-- Data protection (support data buffer available for vibration status
and harsh temperature environment)
Package Content
Furthermore, it offers various data backup options. Remote replication supports data backup from target unit to another remote unit, FTP servers and
file-level synchronization. By integrated with Rsync protocol, it’s able to keep critical data always consistent. Also, it supports SMB/CIFS,NFS, and AFP
protocols for file sharing among cross-platforms such as Windows, Mac and Linux/UNIX.
Client O.S. support
ŒŒ iNAS 330 unit x 1
ŒŒ QIG x 1
ŒŒ CD x 1
ŒŒ Windows 7+, Windows Server 2003 R2, 2008, 2008 R2 & 2012 or later
ŒŒ Linux & UNIX
ŒŒ Mac OS X 10.7 or later
The iNAS 330 supports Power over Ethernet (PoE/PoE+) and following the specifications in IEEE 802.3af/ IEEE 802.3at. It’s has dual PoE+ interfaces which
could support power redundancy. In addition, iNAS 330 could be used on video recording system widely which supports RAID 5 function and also offers the
data protection. The iNAS 330 was built with a fanless, thermally efficient, dust- and water-protected IP 54-rated chassis. It’s sealed enclosure eliminates
internal fans as a point of critical system failure, protecting the internals.
Optional Accessories
Web Browsers Support
ŒŒ Wall-mount-kit: 2 extra brackets and screws
ŒŒ M12 cables: waterproof 8pin male M12 to RJ45 gigabit Ethernet
cable, rated IP67
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Specifications
ŒŒ 246mm (w) x 194mm (D) x 60mm (H) (9.69”x 7.64”x 2.36”)
Networking
ŒŒ HTTP/HTTPS, Samba/CIFS, NFSv4, AFP(v3.3), SNMP(v3),FTP,
ŒŒ TLS 1.0, TLS 1.2,TCP/IP,IPv4/IPv6,IEEE 802.3x
System Dimensions
Hardware Features
Power Requirements
Software Features
ŒŒ Computer
-- Processor: Dual Cortex-A9 CPU
-- Storage: Up to 3 x 2.5” HDD/SSD
-- On board SSD storage
Storage buffer available for anytime status
ŒŒ Input: PoE (IEEE 802.3af), or PoE+ (IEEE 802.3at)
ŒŒ Power redundancy
Ethernet
Physical Characteristics
ŒŒ 2 x Gigabit LAN ports for data redundancy (M12)
ŒŒ 1 x Gigabit LAN port for management (M12)
ŒŒ Fanless
ŒŒ Housing: metal, IP 54 protection
ŒŒ Mounting: wall mount (optional)
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Button
ŒŒ Reset button: reset to factory default
(Pressing and holding the button for 5 seconds will reset to factory
default)
LEDs
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
30
2.00
ŒŒ 2 Gigabit Ethernet ports for data/power redundancy with PoE+
ŒŒ Data protection in harsh environments
ŒŒ Fully compliant with EN50155 (railway applications), EN61373
(vibrations & shocks)
Power LED: power On/Off
System LED: system status
PoE/temp LED: PoE/temp status
HDD LED: HDD1, HDD2,HDD3 (read/write/fail)
LAN LED: 10/100/1000M x3 (link/activity)
Industrial Network and Cloud Product Selection Guide
HS Control
ŒŒ Smart heating system
OS: Linux
Firmware upgrade via system web UI
System management via management web UI
RAID management: RAID 0,1,5,JBOD
IP settings: fixed IP, DHCP
Auto data rebuilding
Remote backup
Internet Explorer IE 9.0 later
Mozilla Firefox
Apple Safari
Google Chrome
Ordering Information
ŒŒ iNAS 330 (P/N: 101G0033000X0)
Rugged-design industry storage (3 years service & maintenance)
Environmental Specification
ŒŒ Operating temperature:
-- -40°C ~ +70°C (-40°F ~ +158°F) For SSD
-- -25°C ~ +55°C (-13°F ~ +131°F) For HDD
ŒŒ Storage temperature: -40°C ~ 85°C (-40°F~176°F)
ŒŒ Humidity: 5% - 95%, non-condensing
Certifications
ŒŒ FCC/CE
ŒŒ RoHS/WEEE
Industrial Network and Cloud Product Selection Guide
31
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
Industry 4.0 Wireless
Solution (IWS)
manufacturing capacity and meet
demands, using traditional approach
such as installing complex physical
SCADA/MES
wiring or costly leased lines, is no
Managenet APP
3rd Party Controller
nCare
Subnet A
Switch
longer feasible and may also introduce
new wiring limitations for certain
manufacturing equipment. As a result,
One of the most prevalent applications of Industry 4.0 (I4.0) is extracting
wireless connectivity has become a vital
field data to monitor factory operations and device health status, and using
component of Industry 4.0, offering
those data for big data analytics to reduce potential system malfunctionsand
the flexibility to easily build and deploy
increase production efficiency and yield. To achieve this, a cyber-physical
a reliable wireless backbone network
system (CPS) is required to mine and transfer data from lower layer devices
without wiring constraints.
and agile factory operations has gained increased importance due to the
varying production needs of increasingly individualized products. To expand
Subnet C
NIO 200IDG
to cloud service platforms for analytics processing (Figure 1).
As I4.0 introduced the shift to unmanned factories, the need for flexible
Subnet B
CPE
Building a Secure,
Reliable I4.0 Connectivity
Framework
IWF 503
NIO 200IDR
NIO 200HAG
Proprietary
WirelessHART
P2P/P2MP
Mesh Point
IWF 310
A complete Industry 4.0 wireless
CPE
Wi-Fi
Adapder
IWF 503
NIO 50
solution consists of a 3-layer integration
of enterprise information technology
(IT), communication technology (CT)
Figure 1. NEXCOM wireless solution competence.
and operational technology (OT)
networks, and fulfills the following the
Wireless Video
AGV Operation
Shop Floor Monitoring
ISA 100 Native
HART
Figure 2. A digital factory implementing NEXCOM's complete I4.0 wireless solution.
requirements:
■■
nCare Network
Management
■■
NEXCOM
Competence
Process Autimation
Wireiess
■■
solutions feature seamless, integrated wireless connectivity
to bring the field data from different devices to management
monitoring and troubleshooting of
and ruggedized reliability required for a dedicated, always-on
level through different industrial protocols such as Modbus,
the wireless network and field devices.
industrial Wi-Fi network.
Provide the flexibility to easily and
■■
Easy and flexible deployment through EZ Mesh: Utilizing
Process Automation Wireless Solution for oil and gas
proprietary self-forming and self-healing functions, EZ Mesh
industries: To fulfill the challenges in mission-critical
backbone.
provides communication redundancy and low latency path
industries such as oil, gas and chemical, NEXCOM offers
Able to integrate with various field
routing to create a reliable, high-speed wireless backbone
ISA100.11a (IEC 62734)/WirelessHART (IEC 62591) wireless
network.
field device connectivity besides the Wi-Fi network solution.
Visualized network and field device health management:
The wireless field connectivity solution is based on 802.15.4
Support advanced network security
NEXCOM nCare provides instant visibility to the management
radio with tightened security and robust protocols to ensure
features.
of the entire enterprise network to help facilitate the network
its reliability in field. NEXCOM industrial wireless solution
installation, operation, maintenance, troubleshooting process
contains Gateway Systems (integrates gateway, system
as well as field device platform health monitoring.
manager and security manager), Backbone Routers (applies to
Field device communication: NEXCOM's I4.0 wireless
distributed topology), Device Adaptors and can be managed by
solutions support a diverse range of wireless device gateways
NEXCOM nCare manager.
protocols.
■■
HART and Fieldbus protocols.
■■
quickly deploy a wireless mesh
devices with different industrial
Intelligent Mesh
Field Device
Communication
Deliver remote management for
Industry 4.0 Wireless
Network Architecture
■■
■■
NEXCOM's industrial Wi-Fi solutions
cover the entire spectrum of the 3-layer
architecture, and feature an always-
Figure 3. NEXCOM's Industry 4.0 Wi-Fi complete solution.
on and ruggedized design to meet the
industrial requirements of Industry 4.0
(Figure 2).
I4.0 Network Management
nCare
Compared to generic enterprise wireless
solutions which focus design on the
user usability and bandwidth utilization,
NEXCOM's I4.0 wireless solutions (Figure
3) offer the following advantages:
■■
Dedicated Wi-Fi network for field
devices: NEXCOM's I4.0 wireless
32
EZ Mesh
Mid-Scale Mesh
Mobile Mesh
Large-Scale/
Roaming Mesh
P2P/P2MP
AP/WDS
IWSN Gateway
Field Device Connectivity
IWF 310
IWF 6330
IWF 603
NIO 200
NIO 50
33
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
Industry 4.0 Wi-Fi Solution Application
Wireless Video Surveillance
power radio modules to cover a wide transmission distance.
IP cameras have been widely used in different industries
Automated Guided Vehicle (AGV)
for security surveillance. As IP camera technology
NEXCOM Solution Advantage
In response to the growing production needs, more
■■
and more AGVs have been deployed in factories. AGVs
■■
IP55-rated waterproof and dust protection, and wide operating
temperature range for reliable operation in both outdoor and
advances and gains widespread adoption, many new
Automatic routing to the most optimal mesh path ensures AGVs
industrial environments.
are connected to the link with the best possible signal strength.
surveillance applications have emerged. One example is wireless
Support remote management through NEXCOM nCare, allowing
video surveillance of unmanned factories. NEXCOM offers industrial
or external controller. However, the actual transport assignments
administrators to easily monitor and manage the status of the
Wi-Fi based on the IEEE 802.11ac standard to deliver Gigabit speeds
monitoring of the network and devices in the wireless video
and vehicle route monitoring are assigned and monitored by the
wireless network and AGVs.
to provide smooth video streaming for point-to-point (PtP) and
surveillance system.
AGVs are equipped with industrial Wi-Fi mesh gateways, turning
point-to-multipoint (PtMP) video surveillance applications (Figure 6).
are typically controlled through an onboard controller
control center. By establishing a Wi-Fi network using NEXCOM's EZ
■■
■■
Mesh Wi-Fi, control centers can remotely monitor AGV operations
AGVs into mobile mesh nodes to enhance mobility and facilitate
in real-time and dispatch job requests wirelessly to AGVs (Figure 4).
the deployment of a mesh network.
Application Challenge
Onboard rugged AGV antennas are available to ensure a
■■
Compared to conventional roaming methods, NEXCOM's EZ Mesh
■■
solution provides a wireless roaming network with multiple mesh
stable, high performance and online-all-the-time communication
paths to ensure AGVs can roam seamlessly within plant floors with
between AGVs and control center.
■■
Feature nCare software support for remote management and
nCare
Switch
installation costs and wiring challenges.
■■
no connection interruption or data loss.
APP (Phone/Pad)
Control Center
Implementing an Ethernet-based wired network incurs high
Overcome external interferences affecting wireless signal
P2P/P2MP
P2P/P2MP
strength while providing adequate wireless bandwidth over long
Switch
distances to ensure smooth video transmission.
Camera
IWF 503
Camera
Application Challenge
■■
The interiors of the plant floors contain various objects that
Mesh AP Mesh AP
Mesh AP
Mesh AP
obstruct Wi-Fi signals.
■■
NEXCOM Solution Advantages
■■
Delayed data transmissions and data loss when AGVs roam
NEXCOM's industrial grade Wi-Fi based on IEEE 802.11ac delivers
wireless performance at up to Gigabit speeds, and features high-
nCare
Steel Plant
Cement Plant
Figure 6. Wireless video surveillance system layout.
between APs.
■■
The close distance between the ground surface and AGV often
AGV Controller
blocks the coverage of Wi-Fi signal.
Figure 4. Advanced mesh network of AGVs and APs.
Mesh AP
Mesh AP
Mesh AP
Plant Floor Monitoring
Whether it is predictive maintenance or production
■■
Process Automation Monitoring
wide data from a range of field devices. These data are
Devices in areas with wiring constraints prevent remote
management and device health monitoring.
optimization, the smart factory of I4.0 requires plant■■
Require a multi-protocol gateway to connect low layer field
Vertical industrial applications such as chemical, oil
to a single wired Ethernet interface, limiting flexible network
collected to a central SCADA system for monitoring and control of
devices to higher layer networks for upper management
and gas processing require strict monitoring and
deployment options.
plant floor operations. To meet the growing demands for maximized
supervision.
Limited RF sensitivity reduces the distance of wireless network
productivity, a network that can cover the connectivity of increasingly
coverage, requiring the use of additional repeaters.
larger plants and extra manufacturing equipment is needed. In such
NEXCOM Solution Advantage
large-scale networks where physical wiring is infeasible, NEXCOM's
■■
management of manufacturing processes. Pipeline
■■
conditions, tank levels and other critical processes require close
surveillance to ensure smooth ongoing operations. Due to the
strict nature of these applications, most field devices use industrial
NEXCOM Solution Advantages
protocols that deliver transmission reliability and low latency
■■
characteristics. Two of the most common protocols are ISA100 and
mesh network (Figure 7).
■■
■■
nCare offers unified management of the entire network and
connected devices, giving administrators hardware visibility of the
configurations with a redundant and scalable design to ensure
WirelessHART. To respond to this demand, NEXCOM's NIO 200
series of IoT gateways offers ISA100 and WirelessHART support,
Support All-in-One Gateway and Distributed Network topology
EZ Mesh technology enables simple and flexible deployment of
mesh backbone networks.
EZ Mesh offers wide wireless coverage through a reliable multi-path
high network availability and ease of deployment.
Application Challenge
Support Wi-Fi AP/Wi-Fi Mesh/Ethernet connections for outbound
■■
system to effectively monitor and manage device health status.
Using an Ethernet-based wired backbone limits the flexibility
■■
Multi-protocol Wi-Fi gateways are available to connect to field
and features C1D2 and ATEX certifications for reliable operation in
communication, enabling flexible deployment options for the
to expand the network to accommodate extra manufacturing
devices with different protocols, bringing them online from the
process automation environments (Figure 5).
backbone network with significant cost savings in wiring and
capacity.
edge to the cloud for upper management supervision.
installation.
Application Challenges
■■
■■
Most wireless process automation networks are based on an Allin-One Gateway topology which lacks the flexibility to scale in
■■
Unified remote management and monitoring through NEXCOM
■■
certifications, and high receiver sensitivity with strong
All outbound connections for the field network are restricted
interference resistance.
NIO 200
SQL Server
Ruggedized design featuring IP67 protection, C1D2 and ATEX
size.
Ethernet
Ethernet
nCare.
NIO 200
ISA100/
WirelessHART
ISA100/
WirelessHART
Control Center
Oil Tank 1
Oil Tank 2
IWF 300
EZ Mesh Network
NISE 50
IoT Gateway
NIO 50
NIO 50
Machine 1
Machine 5
Machine 1
Machine 8
Machine 4
NISE 3700
Edge Server
NIO 50
Machine 5
Machine 1
Machine 8
Machine 4
Machine 5
Wi-Fi Mesh
ISA100/
WirelessHART
Wi-Fi AP/ Client
Handheld Mobile Computer
Figure 5. Tank level monitoring and measurement.
34
NIO 200
NIO 200
ISA100/
WirelessHART
Oil Tank 3
Oil Tank 4
Machine 4
Product Line1
Product Line2
Machine 8
Product Line3
Figure 7. Plant floor monitoring system layout.
35
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
nCare I4.0 Network
Management Solution
Complete visual mapping: The development of globalization
support can be managed by nCare to give administrators
Vital health data from devices in the
has increased the number of factories built across the globe.
hardware visibility and control. The following configuration items
lower layer network can be retrieved
Therefore, utilizing a map integrated with floor plans of
and hardware health status are available for NEXCOM Xcare-
and transferred through the backbone
factories as visual representations of the entire topology is the
network to nCare for device health
most efficient way for managing large-scale systems. nCare
management.
incorporates Google Maps and Baidu Maps to offer accurate
devices running proprietary protocols.
■■
map data from any location. For visualization of the interiors of
A complete Industry 4.0 (I4.0) connectivity solution requires a sound
NEXCOM's IWF 800 nCare Edition is a fully
factory plant floors, nCare can categorize devices on different
management mechanism and a solid backbone network. Not only the
integrated 1U industrial grade network
floor levels to different groups. A total of up to 15-story floor
backbone network needs to be managed to ensure optimal network
appliance featuring nCare that supports
plans can be supported to fulfill mass requirements (Figure 5).
performance, the equipment and devices in the network also require close
centralized management ofup to 1000
management to ensure stable operation. This will reduce any unexpected
nodes, which can be further scaled for
device malfunction and increase production efficiency and yield rate.
future expansions. A free license for a
30-day trial version is also available upon
NEXCOM has released an I4.0-based remote network management tool,
request.
nCare Highlights
as SNMP, CAPWAP and LLDP, as well as Modbus to communicate with
■■
Network & node device health manager
industrial devices. With various protocol support, nCare not only can manage
■■
Wired & wireless device manager
NEXCOM's wireless equipment and devices, but also third-party devices
■■
Co-exist with 3rd party solutions
(based on the management functions made available by the device) and
■■
Mobile device app for remote management
■■
Customization service for vertical
■■
■■
troubleshooting and updating tasks. Protocols such as SNMP,
CAPWAP and LLDP are supported to interface with third-party
network devices with different levels of administration to
delegate tasks between nCare and third-party AAA systems.
The basic management items of nCare include the following:
■■
Management capacity of up to 1000
■■
Features & Benefits
Devices can be managed in real-time through layered
security mechanism to carry out surveillance, maintenance,
nodes as default for IWF 800 appliance
Field Device Health Monitoring
Network Device Maintenance and Management
■■
- Device image upgrade & provisioning
cycle
- Remote reboot
- Warning notification
■■
Device Health Management from Top to
Bottom
device management
Figure 1. nCare Node and Network Health Management Solution.
- CPU usage, system temperature, memory usage & storage life
nCare supports a variety of industrial fieldbus protocols such
as NEXCOM Xcare™, Modbus TCP, MQTT and transparent
nCare (Figure 1), to respond to the connectivity requirements of I4.0.
nCare supports various common network management protocols such
enabled devices:
■■
- Provisioning & configuration
tunneling protocols to provide management for a wide range
of field devices (Figure 7).
■■
Support Vertical Device Health Management customization
service.
■■
nCare can be customized to support customer-specific
proprietary protocols. Furthermore, with added Modbus
support, nCare can serve as the health management platform
to assist factory managers in acquiring data from various
devices for predictive analysis.
- Configuration backup & restore
System Log Tracking and Notification
- Remote AP reboot/device reset
nCare utilizes a unique Time Machine log tracking mechanism to
- Mobile management through App (Figure 2)
assist administrators to effectively analyze and diagnose system
nCare connects to lower layer devices using industrial protocols
errors. It also supports notifications through email, SMS, social
for system monitoring and management (Figure 6). For example,
media (Facebook, Twitter, WeChat and Line) to alert users about
NEXCOM's industrial fanless computers with NEXCOM Xcare™
abnormal events (Figure 8).
nCare has been specifically designed
with I4.0 in mind. It features an intuitive
nCare
SCADA/MES
3rd Party Management
AP/Mesh/P2MP/Securiyt Wi-Fi/Network Router
visualized interface to provide users with
Pad
Phone
Figure 2. Mobile App for remote management.
simple operations for managing devices.
Figure 3. Automatic alerts of abnormal events.
nCare offers users with the following
Figure 4. nCare categorizes severity of issues based on the warning information received.
benefits:
Figure 5. Support visual display of up to multiple story floor plans.
Figure 6. Commonly used configuration items help improve device deployment efficiency.
Flexible Visualization of
Network Topology
Modbus/Xcare/MQTT/MS WMI
■■
Automatic discovery function for
Figure 7. Support a variety of industrial protocols to provide management for a wide
range of devices.
Figure 2
Figure 8. nCare provides alert notifications to users through email, SMS and social media.
diverse devices: Besides supporting
common network management
Machine
Air Compressor
PLC
Pump
protocols such as SNMP and CAPWAP,
Meter
nCare also supports Modbus protocol
to provide Modbus discovery functions
for industrial devices, fulfilling the
management needs of diverse devices
in I4.0.
■■
Dynamic status update: nCare offers
Figure 3
Figure 4
Figure 5
users with dynamic status update
nCare automatically sends
notification to receiver by mail
feature. Any device malfunction will
Notification information
be marked by a red icon on the visual
topology. At the same time, a log
record will be displayed below the
Notification detail
topology to show descriptions of the
issue to aid in the troubleshooting
process (Figure 3 and 4).
36
Figure 6
Figure 7
Figure 8
37
IWF 800 nCare
I4.0 Node and Network Manager
Device node Management
Administration
ŒŒ Support device protocol: Modbus TCP/RTU/ASCII, NEXCOM Xcare,
WMI (Windows Management Interface)*
ŒŒ Monitor device health condition: HDD life, CPU/memory usage,
temperature, etc. (through Xcare)
ŒŒ Remote device threshold setting and provisioning
ŒŒ Remote device control: reboot, watchdog enable/disable
ŒŒ Customized service for customer owned device asset management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Report & Log
ŒŒ
ŒŒ
ŒŒ
ŒŒ
anaged device profile report
M
Managed device status report: network traffic, system usage
Export formats: csv and txt file
System log: 6-month log in local database
Event Notification
Main Features
ŒŒ Automatically discover managed devices by SNMP, CAPWAP &
Modbus scan
ŒŒ Visual topology to display device and wireless link status for
remote management
ŒŒ Supports Modbus TCP protocol to communicate with Modbus
device for asset management
ŒŒ Easy remote provisioning, configuration, firmware upgrade and
reboot for NEXCOM IWF devices
ŒŒ Flexible events and notifications with pre-defined threshold
ŒŒ Supports third-party devices with MIB compiler and MIB browser
ŒŒ Comprehensive report and log, including asset status, system log
and usage report
ŒŒ Supports smart phone/tablet APP for mobile management
ŒŒ Support API, customization service for management of private
protocol communication
ŒŒ Co-existing with 3rd party management solution through standard,
open interface
ŒŒ Management scope can be up to 6,000 nodes
ŒŒ Event trigger by
-- Pre-defined threshold
-- generic trap rules
Link-up
Link-down
Warm start
Cold start
ŒŒ Outbound notice
-- Email
-- S.M.S. (Clickatell service subscribed by end user)
-- Social Media: WeChat, Facebook, Twitter
rivilege: 3-level (admin, manager, users)
P
Concurrent access user: 5
Supported node number: 1,000 (default)
Scale up to max. 3,000 nodes by project base
Physical
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
U 19" rack mount, 430mm x 260mm x 44mm
1
Net weight: 5kg
Operating temperatures: 0°C~40°C
Storage temperature: -20°C~75°C
Relative humidity: 10%~90% non-condensing
Certifications: CE/ FCC
Ordering Information
ŒŒ IWF 800 nCare, I4.0 Node and Network Manager
(P/N: 10T0NCARE00X0)
Product Overview
Nowadays, lots of production data or device information needs to be smoothly transmitted to server or cloud for big data analytic in I4.0 applications. Thus,
a good management tool to ensure the connectivity facilities, including networking and field devices run in good condition is very important.
NEXCOM provides nCare, I4.0 Node and Network Manager to fulfill the demand of such management. nCare is designed with protocols for network
management and Modbus. This enables nCare to manage not only NEXCOM’s IWF products but also third party devices. In addition, nCare can also manage
those devices implemented with Modbus protocol. nCare is a perfect tool to manage connectivity products from device to network backbone and construct
3-layer management solution in I4.0 applications.
Specifications
nCare Manager Platform Requirement
Operating System
Auto discovery
ŒŒ Windows 7 (64-bit)
ŒŒ VM supported by project base
ŒŒ S
upport CAPWAP, LLDP & SNMP, Modbus TCP
ŒŒ Support NEXCOM IWF AP/Mesh, NIO series gateway, industrial PC
series via Xcare utility*
ŒŒ Support rogue AP detection through SNMP
ŒŒ Manually add/edit/delete managed devices
Hardware
ŒŒ CPU support: Intel® Atom™ Quad-core 2.4GHz
ŒŒ Main memory: 8GB memory with DDR3 1600MHz Long-DIMM sockets
ŒŒ I/O interface-front
-- 2 x USB 2.0 ports
-- 1 x RJ45 type console port
-- 4 x GbE copper ports
-- 1 x reset button
ŒŒ I/O interface-rear
-- 2 x USB 2.0 ports
-- 1 x VGA port
ŒŒ HDD storage: 500GB
Client Platform Requirement
PC system
ŒŒ D
isplay resolution: 1024 x 768 or above
ŒŒ Browser: Chrome, IE11, Firefox
-- Hardware: Intel® Atom™ or above, 8GB DDR3
ŒŒ Mobile device for APP
-- Android: 5.0 or above (iOS9 will be supported later)
38
Functionality
Industrial Network and Cloud Product Selection Guide
Visual Topology
ŒŒ View multi-layer topology at a glance
ŒŒ Display Mesh Paths & Neighbor Links dynamically
ŒŒ S
how link traffic and threshold setting instantly
ŒŒ One click for Device Asset information
ŒŒ S
upport remote PING function
ŒŒ Support Google, Baidu and customized layout Map
ŒŒ Support location coordinate remark
AP/Mesh Networking Device Management (Only to NEXCOM IWF)
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Provisioning & configure
Configuration setting backup & restore
Restore to factory default
Remote AP reboot/reset
Firmware upgrade thru manual/batch/schedule**
Industrial Network and Cloud Product Selection Guide
39
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
Trustworthy
Industrial Wi-Fi
Mesh Network
Rugged EZ Mesh and
Outdoor Mobile Mesh
Traditional AP-Client
RJ45/ WAN
140
Internet
100
RJ45/ WAN
EZ Mesh and Outdoor Mobile Mesh. EZ Mesh
160m
NEXCOM's industrial Wi-Fi mesh solutions
consist of two product families: Rugged
80
80m
IWF 300
80m
160m
between low-speed auto guided vehicles
Stable network transmission is one of the most crucial requirements for Industry
(AGV) and control room systems.
4.0 (I4.0). NEXCOM's industrial Wi-Fi mesh products offer a unique wireless mesh
solution utilizing self-forming and self-healing technology to create a reliable
Mobile Mesh, on the other hand, is aimed
wireless backbone network (Figure 1). When interferences to the transmission
for large-scale Wi-Fi networks requiring
signal of a mesh path are present, NEXCOM's mesh technology will adapt and
a reliable mesh backbone network for
reroute to the most optimal network path, ensuring that data is reliably delivered
enhanced mobility, including the capability
to the central office. At the same time, the dual radio design offers either dual link
to support inter-plant communication and
redundant mesh backbone or Hybrid Mesh + AP topology for connecting Wi-Fi
high-speed vehicle communication. All
clients to the internet (Figure 1).
industrial wireless products in EZ Mesh
45 Mbps
40
Internet
factory floors, such as wireless communication
49 Mbps
60
Intelligent Mesh Network
is targeted for mid-size Wi-Fi networks in
125 Mbps
120
RJ45/ WAN
IWF 300
Throughput (Mbps)
Figure 2. Traditional AP-client mode is linked with a single path.
NEXCOM’s EZ Mesh provides multiple paths for highest link
reliability, which results in the lowest amount of packet loss.
Mesh AP-1
Mesh AP-4
Mesh AP-2
Mesh AP-3
33 Mbps
20
0
1 HopsThroughput
2 HopsThroughput
3 HopsThroughput
4 HopsThroughput
125
49
45
30
Figure 3. 4-device mesh network in 160m2 space and 4-hop coverage
and performance figures.
Mesh AP-1
Mesh AP-5
Mesh AP-4
Mesh AP-2
Mesh AP-3
New Mesh AP
and Mobile Mesh are supported by
NEXCOM nCare management for remote
Figure 1. NEXCOM's Industry 4.0 Wi-Fi Mesh framework offers robust and
reliable network transmission.
EZ Wi-Fi Mesh
Network Solution
nCare
IWF 310
IWF 310
Mesh Point
standard and utilizes proprietary protocol
to establish an interference-free network
Mesh Point
AP Mode
2.4GHz Access
Mesh Mode
Secure, Reliable and
Intelligent Network Topology
EZ Mesh is based on the IEEE 802.11s
2.4 & 5GHz
Dual Band
Backbone
5GHz
Backbone
central management.
2.4 & 5GHz Access
communication path. Each single mesh
point formed by the EZ Mesh Wi-Fi APs
supports self-routing functions without
the need and assistance of an extra
controller (Controller-less Intelligent
Mesh). Furthermore, the EZ Mesh family
Figure 4. EZ Mesh offers easy scale-up flexibility. New mesh APs
can be scanned and joined to the network automatically. Additional
mesh APs can make mesh links more reliable.
also features high resistance to any potential radio interference
that may be present in industrial environments. Designed with
Machine
AGV
Machine
Handheld PC
featuring dual RF, dual band and concurrent
dual link to provide network redundancy
for the backbone network, as well as
the flexibility to adapt to different Wi-Fi
application topologies (Figure 2).
High Performance,
Ruggedized for Tough
Production Environments
The EZ Mesh family also implements
Easy installation & scalability for mid-scale deployment (Figure 4)
■■
Controller-less Self-forming and self-healing (Figure 5)
■■
High bandwidth 33Mpbs bandwidth capacity after 4 hops
■■
Support multiple topologies: Mesh/AP/Bridge modes
■■
Rugged, high-power and dual/triple RF design
■■
High stability with a rate of under 0.01% for packet loss (PER, Packet
EZ Mesh offers wireless roaming ideal for low-speed vehicles
traveling <50km/h such as AGV applications in factories.
Error Rate)
EZ Mesh Application in Factories
For I4.0 Wi-Fi networks in industrial factory environments, NEXCOM's
IWF 300 industrial EZ Mesh AP can build a trusted Wi-Fi mesh
network with central management using nCare to provide shop-floor
monitoring and wireless communication with online AGV (Figure 6).
Requirements of the application:
■■
Industrial grade Wi-Fi equipment.
■■
Self-healing/ forming with easy installation and
central management.
IEEE 802.11an MIMO technology with
the capability to sustain up to 33Mbps of
networking, and 2.4GHz for Wi-Fi client access.
■■
■■
EZ Mesh supports central management through NEXCOM nCare
and provides concurrent dual band operation: 5GHz for mesh
to build a stable and capable wireless IoT network backbone.
incorporates a resilient radio module design
PLC
environments.
■■
transmission reliability in mind, EZ Mesh enables factory operators
EZ Mesh Highlights
Server PC
Figure 5. EZ Mesh topology provides self-forming and self-healing
benefits to form an automatically connected/ maintained network.
■■
Support wireless roaming for AGV connection.
bandwidth even after 4 hops. Combined
with the high-power radio design, the
NEXCOM's EZ Mesh solution:
EZ Mesh family not only provides far-
■■
reaching wireless communication, but
40
IWF 300 and IWF 310 offer industrial grade reliability
with wide operating temperature ranges for industrial factory
Figure 6. EZ Mesh application scenario.
41
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
Mobile Mesh AP Wi-Fi Backbone
Product Selection Guide
Designed for long-distance coverage and large-scale
industrial Wi-Fi with EN50155 certification to provide reliable
deployments, the Mobile Mesh family of industrial Wi-Fi is
operations for railway applications. Both the IWF 6300 series and
capable of delivering up to 100Mbps sustained bandwidth even
IWF 3310 series can be used in conjunction for a variety of Wi-Fi
after 10 hops over the mesh backbone network. In addition,
applications. For example, the Wi-Fi APs can be used to build
the M series of the Mobile Mesh family offers fast wireless
a wireless mesh network with fast roaming speeds for railway
roaming speed of 20ms, enabling smooth data transmission
vehicles, offering passengers seamless on-train Wi-Fi roaming
for applications requiring low latency such as video images and
service.
Model Name
high-speed vehicles traveling up to 120km/h. Coupled with IP67
Mobile Mesh Highlights
reliability in tough, outdoor environments.
■■
Easy installation & scalability for large-scale deployment
■■
Multi-path bridge
NEXCOM's Mobile Mesh family includes a complete range of
■■
Self-forming and Self-healing
outdoor Wi-Fi and industrial Wi-Fi solutions. The IWF 6320
■■
120Mpbs bandwidth capacity after 10+ hops
and IWF 6330 outdoor Wi-Fi APs feature a dual and triple RF
■■
Fast roaming speed of 20ms
module design respectively, and are based on IEEE 802.11n
■■
Support Mesh/AP/Bridge modes
with 2x2 MIMO technology. IWF 3310X, on the other hand, is an
■■
IP67, High-power and Dual/Triple RF design
Mobile Mesh Application
in Outdoor Environments
The IWF 6330 series of the Mobile Mesh family
Mobile Mesh Family
IWF 310
IWF 6320M/H
IWF 6330M/H
IWF 3310XM/H
Industrial
EZ Mesh AP
Rugged Industrial
EZ Mesh AP
Outdoor
Mobile Mesh AP
Outdoor
Mobile Mesh AP
Industrial
Mobile Mesh AP
802.11a/b/g/n 2x2 MIMO
802.11a/b/g/n 2x2 MIMO
802.11a/b/g/n 2x2 MIMO
Photo
Category
protection and high-power RF design, Mobile Mesh delivers high
EZ Mesh Family
IWF 300
WLAN Standard 802.11an+b/g/n 2x2 MIMO 802.11an+b/g/n 2x2 MIMO
Number of
Radios
2
2
2
3
1
Number of
Antenna
2
2
4
6
2
Type of RF
Connector
RP-SMA
RP-SMA
N-Type Female
N-Type Female
RP-SMA
Number of
WAN Port
1
1
1
1
1
Number of
LAN Port
4
4
0
0
0
Type of LAN
RJ45
RJ45
RJ45
(Encapsulated by M25)
RJ45
(Encapsulated by M25)
RJ45
IP Rating
IP30
IP30
IP67
IP67
IP30
Wall Mount
Wall Mount
Wall/Pole Mount
Wall/Pole Mount
Wall/DIN-Rail Mount
Temperature
-40°C ~ +80°C
-40°C ~ +80°C
-35°C ~ +75°C
-35°C ~ +75°C
-40°C ~ +80°C
Dimension
(H x W x D) mm
205 x 105 x 25
offers a Mesh/Hopping feature designed for longdistance coverage and large-scale deployments.
The IWF 6330 series is ideal for wireless outdoor
video surveillance where video data from devices
in remote areas need to be transmitted wirelessly
over a reliable mesh network (Figure 7).
Requirements of the application:
■■
Industrial-grade reliability for tough outdoor
Mounting Style
environments.
■■
Reliable and stable wireless data transfer rate.
■■
Trusted and secure Wi-Fi network.
185 x 108 x 43
220 x 220 x 77
220 x 220 x 77
58.8 x 139.6 x 167
PoE Input
N/A
N/A
Passive PoE: 48V
Passive PoE: 48V
IEEE802.3at
DC Input
12VDC
12VDC
N/A
N/A
2 x DC Input: +12 ~ +48V
Certification
CE, FCC
CE, FCC
CE, FCC
CE, FCC
CE, FCC, EN50155
EN60950-1
EN60950-1
EN60950-1
EN60950-1
EN60950-1
Operation
Mode
AP/Router/EZ Mesh
AP/Router/EZ Mesh
AP/Station/Mesh*
(* Mesh Model Only)
AP/Station/Mesh*
(* Mesh Model Only)
AP/Station/Mesh*
(* Mesh Model Only)
Management
Mode
SNMP/GUI/
nCare Management
SNMP/GUI/
nCare Management
SNMP/GUI/
nCare Management
SNMP/GUI/
nCare Management
SNMP/GUI/
nCare Management
NEXCOM's Mobile Mesh solution:
■■
IP67-rated waterproof and dust protection to
withstand outdoor conditions.
■■
High-power RF design supporting over 10 mesh
hops at up to 100Mbps to provide long-distance
wireless coverage.
■■
NEXCOM's proprietary security technology
Safty
and self-forming/healing capability enable
deployment of a trusted and secure Wi-Fi mesh
network with path redundancy.
Figure 7. Mobile Mesh outdoor application
scenario.
42
43
IWF 300
Industrial Access Point
Dual RF, 1x 802.11an+1x 802.11 b/g/n 2x2 MIMO
ŒŒ Push buttons: 1 x reset; 1x WES
ŒŒ LED: 1 x power & status; 5 x RJ45; 1 x WES
ŒŒ Dual band antenna: 2 x with RP-SMA connectors
Operating Mode
ŒŒ
ŒŒ
ŒŒ
ŒŒ
P
A
AP router
Client router
EZ Mesh (at 802.11ac, 5GHz)
Security
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
EP(64/128)
W
WAP/WPA2 mixed
WPA2-personal (PSK+CCMP/AES)
WPA2- enterprise (802.1X certification)
Hidden ESSID support
MAC address filtering (MAC ACL)
Station isolation
System Management
Main Features
ŒŒ Dual radios and compliant with 1x 802.11an+1x 802.11 b/g/n 2x2
MIMO
ŒŒ 1+4 port GbE RJ45 ports
ŒŒ Up to 27dBm high RF power
ŒŒ Multiple function: AP/Client/WDS/EZ Mesh
ŒŒ Support 12V DC input
ŒŒ Support -40 ~ 80°C extended operating temperature
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
eb-based administration
W
SNMP V1/V2c
SYSLOG information support
Statistics
Configuration backup and restore
One-button-click to restore factory default setting
Firmware upgrade
WES
Built-in Servers & Client Interfaces to Other Services
ŒŒ D
HCP client
ŒŒ SNMP v1/v2 client (coming soon)
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
2VDC power input
1
Wall mountable
Dimension: 205 x 105 x 25 mm
Weight: 640g
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
perating temperature: -40~80°C
O
Storage temperature: -45~85°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Certification
ŒŒ F
CC
ŒŒ CE
ŒŒ RoHS compliant
Package Contents
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IWF300 unit x 1
Dual band antenna x 2
Ethernet cable x 1
Wall-mount kit x 1
AC-DC power adaptor x 1
* Note:
The available RF output power will be given by certified power in different region
Ordering Information
ŒŒ IWF 300-EU (P/N: 10T00030000X0)
ŒŒ IWF 300-US (P/N: 10T00030001X0)
Product Overview
IWF 300 is QCA9344-based industrial-grade AP/Router/EZ Mesh AP designed with IEEE 802.11 b/g/n 2x2 MIMO and IEEE 802.11an 2x2 MIMO technology.
IWF 300 can deliver data rate up to 300mbps/each radio In addition, the Radio power can be up to 27dBm for wide range coverage and service. IWF 300
also functions as EZ Mesh network Wi-Fi access with cost-effective option.
Specifications
Wireless Radio
ŒŒ 1x IEEE 802.11an 2x2 MIMO
ŒŒ 1x IEEE 802.11 b/g/n 2x2 MIMO
Frequency Ranges
ŒŒ
ŒŒ
ŒŒ
ŒŒ
USA: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.5 ~ 5.7 GHz, 5.725 ~ 5.825 GHz
Europe: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
Japan: 2.400 ~ 2.497 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
China: 2.400 ~ 2.483 GHz, 5.725 ~5.85 GHz
Receive Sensitivity: IEEE 802.11an
ŒŒ IEEE802.11a
-- -76 dBm@54M
ŒŒ IEEE802.11a/n HT20
-- -74dBm@MCS7
ŒŒ IEEE802.11a/n HT40
-- -71dBm@MCS7
RF Output Power: IEEE 802.11an (±2dBm)
Receive Sensitivity: IEEE 802.11a/b/g/n 2Rx
ŒŒ IEEE802.11a
-- 12dBm@54M
ŒŒ IEEE802.11an HT20
-- 12dBm@MCS7
ŒŒ IEEE802.11an HT40
-- 11dBm@MCS7
ŒŒ IEEE802.11b
-- -93dBm@1M
-- -91dBm@11M
ŒŒ IEEE802.11g
-- -94dBm@6M
-- -80dBm@54M
ŒŒ IEEE802.11g/n HT20
-- -94dBm@MCS0/8
-- -77dBm@MCS7/15
ŒŒ IEEE802.11g/n HT40
-- -89dBm@MCS0/8
-- -73dBm@MCS7/15
RF Output Power: IEEE 802.11 b/g/n (±2dBm)
ŒŒ IEEE802.11b
-- 27dBm@1M
-- 24dBm@11M
ŒŒ IEEE802.11g
-- 27dBm@6M
-- 24dBm@54M
ŒŒ IEEE802.11g/n HT20
-- 23dBm@MCS0/8
-- 19dBm@MCS7/15
ŒŒ IEEE802.11g/n HT40
-- 22dBm@MCS0/8
44
-- 18dBm@MCS7/15
Industrial Network and Cloud Product Selection Guide
Hardware
ŒŒ WAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1
ŒŒ LAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 4
ŒŒ Compliant with :
-- IEEE802.3/802.3u
-- Hardware based 10/100/1000, full/half, flow control auto negotiation
Industrial Network and Cloud Product Selection Guide
45
IWF 310
Rugged Industrial EZ Mesh Access Point
Dual RF, 1x 802.11an+1x 802.11 b/g/n 2x2 MIMO
-- IEEE802.3 / 802.3u
-- Hardware based 10/100/1000, full/half, flow control auto
negotiation
ŒŒ Push buttons: 1 x reset
ŒŒ LED: 1 x power& status; 5 x Ethernet
ŒŒ Antenna connectors: 2 x with RP-SMA
Operating Mode
ŒŒ
ŒŒ
ŒŒ
ŒŒ
AP
AP router
Client router
EZ Mesh
Security
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
WEP(64/128)
WPA/WPA2 mixed
WPA2-personal (PSK+CCMP/AES)
Hidden ESSID support
MAC address filtering (MAC ACL)
System Management
Main Features
ŒŒ Dual radios and compliant with 1x 802.11an+1x 802.11 b/g/n 2x2
MIMO
ŒŒ 1+4 port GbE RJ45 ports
ŒŒ Up to 27dBm high RF power
ŒŒ Multiple functions: AP/Router/EZ Mesh
ŒŒ Support 12V DC input
ŒŒ Support -40 ~ 80°C extended operating temperature
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Web-based administration
SNMP V1/V2c (Coming Soon)
SYSLOG information support
Statistics
Configuration backup and restore
One-button-click to restore factory default setting
Firmware upgrade
Built-in Servers & Client Interfaces to Other Services
ŒŒ DHCP client
ŒŒ SNMP v1/v2c client(coming soon)
Physical and Power
ŒŒ 12VDC power input with DC jack
ŒŒ Wall mountable
ŒŒ Dimension: 185 x 108 x 43 mm
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Operating temperature: -40~80°C
Storage temperature: -45~85°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Certification
ŒŒ
ŒŒ
ŒŒ
ŒŒ
FCC
CE
RoHS compliant
EN50155 compliant
Package Contents
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IWF310 unit x1
Dual band antenna x2
Ethernet cable x1
Wall-mount kit x1
AC-DC power adaptor x1
Product Overview
IWF 310 is QCA9344-based rugged industrial-grade AP/Router/EZ Mesh AP designed with Aluminum and Metal Chassis, and IEEE802.11b/g/n 2x2 MIMO
and IEEE802.11an/a 2x2 MIMO technology. IWF 310 can deliver data rate up to 300Mbps/each radio. In addition, the radio power can be up to 27dBm for
wide range coverage and service. IWF 310 also functions as EZ Mesh network Wi-Fi access with cost-effective option.
Specifications
Wireless Radio
ŒŒ 1x IEEE 802.11an 2x2 MIMO
ŒŒ 1x IEEE 802.11 b/g/n 2x2 MIMO
Frequency Ranges
ŒŒ
ŒŒ
ŒŒ
ŒŒ
USA: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.5 ~ 5.7 GHz, 5.725 ~ 5.825 GHz
Europe: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
Japan: 2.400 ~ 2.497 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
China: 2.400 ~ 2.483 GHz, 5.725 ~5.85 GHz
RF Output Power: IEEE 802.11an (±2dBm)
ŒŒ IEEE802.11a
-- 12dBm@54M
ŒŒ IEEE802.11a/n HT20
-- 12dBm@MCS7
ŒŒ IEEE802.11a/n HT40
-- 11dBm@MCS7
RF Output Power: IEEE 802.11 b/g/n (±2dBm)
ŒŒ IEEE802.11b
-- 27dBm@1M
-- 24dBm@11M
ŒŒ IEEE802.11g
-- 27dBm@6M
-- 24dBm@54M
ŒŒ IEEE802.11g/n HT20
-- 23dBm@MCS0/8
-- 19dBm@MCS7/15
ŒŒ IEEE802.11g/n HT40
46
Industrial Network and Cloud Product Selection Guide
-- 22dBm@MCS0/8
-- 18dBm@MCS7/15
Receive Sensitivity: IEEE 802.11an
ŒŒ IEEE802.11a
-- -76dBm@54M
ŒŒ IEEE802.11a/n HT20
-- -74dBm@MCS7
ŒŒ IEEE802.11a/n HT40
-- -71dBm@MCS7
Receive Sensitivity: IEEE 802.11 b/g/n
ŒŒ IEEE802.11b
-- -93dBm@1M
-- -91dBm@11M
ŒŒ IEEE802.11g
-- -94dBm@6M
-- -80dBm@54M
ŒŒ IEEE802.11g/n HT20
-- -94dBm@MCS0/8
-- -77dBm@MCS7/15
ŒŒ IEEE802.11g/n HT40
-- -89dBm@MCS0/8
-- -73dBm@MCS7/15
Hardware
ŒŒ WAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1
ŒŒ LAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 4
ŒŒ Compliant with :
Industrial Network and Cloud Product Selection Guide
47
IWF 6300 Series
Industrial IP67 Outdoor Hopping/Mesh/Mobility Access Point
Multiple RF, Dual Band, 802.11 a/b/g/n
ŒŒ IEEE 802.11g
-- 25dBm@6M (all)
-- 22dBm@54M (all)
ŒŒ IEEE 802.11a/n HT20
-- 24dBm@MCS0/8 (all)
-- 18dBm@MCS7/15 (5180MHz)
-- 17dBm@MCS7/15 (5825MHz)
ŒŒ IEEE 802.11a/n HT40
-- 22dBm@MCS0/8 (all)
-- 17dBm@MCS7/15 (5190MHz)
16dBm@MCS7/15(5795MHz)
ŒŒ IEEE 802.11g/n HT20
-- 25dBm@MCS0/8 (all)
-- 21dBm@MCS7/15 (all)
ŒŒ IEEE 802.11g/n HT40
-- 24dBm@MCS0/8 (all)
-- 20dBm@MCS7/15 (all)
Receive Sensitivity
IWF 6320
IWF 6330
Main Features
ŒŒ Multiple radios and compliant with IEEE 802.11a/b/g/n 2x2 MIMO
ŒŒ Fast roaming (hand-over switch time less than 20 ms)
ŒŒ Smart installation utilities: distance calculation, antenna alignment and
site survey tools
ŒŒ
ŒŒ
ŒŒ
ŒŒ
48VDC PoE input
Gigabit Ethernet waterproof RJ45
WEP, WPA, WPA2-PSK/EAP (IEEE 802.1X/RADIUS, TKIP and AES)
Operating temperature range from -35 to 75°C
Product Overview
The IWF 6320/6330 series are enterprise and carrier-grade 802.11n Triple Radios Outdoor Wireless Access Point which offers customer a robust and high
performing solution for PTP/PTMP/Hotzone/Hopping/Mesh/Mobility Wi-Fi applications in both license-free 2.4GHz and 5GHz bands.
The IWF 6320/6330 series are the most ideal candidate for Service Providers looking to deliver carrier-grade wireless services to multiple market segments
such as Railway train, Bus, MRT fast roaming, campuses Mesh network, hospitality, healthcare, warehousing and wider metropolitan area deployments.
Designed to meet customer needs in a broad range of industries, the IWF 6320/6330 offers the following benefits:
Flexible wireless backbone deployment options
Multiple radio interfaces were integrated by NEXCOM core data switching technology inside the IWF 6330 series. Each radio interface can be configured
independently to meet different wireless connectivity purposes. With the fast data switching between multiple radio interfaces, the backbone throughput
will remain in a high level even after several relays between APs.
High-performance wireless backbone
With the next generation 802.11n MIMO technology, the IWF 6320/6330 offer data link rate up to 300Mbps in each single radio interface. Short Guard
Interval and Frames Aggregation methodology configurations improve the efficient of backbone usage.
IWF 6320/6330 Series Category
Model
Radio Spec.
IWF 6320H
Hopping AP, Dual Radios, IEEE 802.11 a/b/g/n Dual-Band 2x2 MIMO, High Power
IWF 6320M
Mesh/Mobility AP, Dual Radios, IEEE 802.11 a/b/g/n Dual-Band 2x2 MIMO, High Power
IWF 6330H
Hopping AP, Triple Radios, IEEE 802.11 a/b/g/n Dual-Band 2 x 2 MIMO, High Power
IWF 6330M
Mesh/Mobility AP, Triple Radios, IEEE 802.11 a/b/g/n Dual-Band 2 x 2 MIMO, High Power
Specifications
Wireless Radio
ŒŒ 2 x 2 MIMO radios
Frequency Ranges
ŒŒ
ŒŒ
ŒŒ
ŒŒ
48
USA: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.725 ~ 5.825 GHz
Europe: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
Japan: 2.400 ~ 2.497 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
China: 2.400 ~ 2.483 GHz, 5.725 ~ 5.85 GHz
Industrial Network and Cloud Product Selection Guide
ŒŒ IEEE 802.11a
-- -82dBm@6M, 1Rx
-95/-91dBm@6M, 2Rx
-- -65dBm@54M, 1Rx
-79/-75dBm@54M, 2Rx
ŒŒ IEEE 802.11b
-- -82dBm@1M, 1Rx
-92/-88dBm@1M, 2Rx
-- -76dBm@11M, 1Rx
-92/-88dBm@11M, 2Rx
ŒŒ IEEE 802.11g
-- -82dBm@6M, 1Rx
-95/-91dBm@6M, 2Rx
-- -65dBm@54M, 1Rx
-80/-76dBm@54M, 2Rx
ŒŒ IEEE 802.11a/n HT20
-- -82dBm@MCS0, 1Rx
-95/-91dBm@MCS0, 2Rx
-- -64dBm@MCS7, 1Rx
-77/-73dBm@MCS7, 2Rx
ŒŒ IEEE 802.11a/n HT40
-- -79dBm@MCS0, 1Rx
-91/-87dBm@MCS0, 2Rx
-- -61dBm@MCS7, 1Rx
-73/-69dBm@MCS7, 2Rx
ŒŒ IEEE 802.11g/n HT20
-- -82dBm@MCS0, 1Rx
-95/-91dBm@MCS0, 2Rx
-- -64dBm@MCS7, 1Rx
-77/-73dBm@MCS7, 2Rx
ŒŒ IEEE 802.11g/n HT40
-- -79dBm@MCS0, 1Rx
-92/-88dBm@MCS0, 2Rx
-- -61dBm@MCS7, 1Rx
-74/-70dBm@MCS7, 2Rx
ŒŒ IEEE 802.11a
-- 24dBm@6M (all)
-- 21dBm@54M (all)
ŒŒ IEEE 802.11b
-- 24dBm@1M (all)
-- 24dBm@11M (all)
DHCP server
RIP
IP filter
Port filter
Port forward
DMZ support
Static route
Security
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Hide SSID
MAC filtering ACL
WEP 64/128/152 bits
IEEE 802.1x EAP-TLS/EAP-TTLS/MSCHAPv2/GTC
WPA/WPA2 PSK/EAP with TKIP/CCMP AES based Encryption
Management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
HTTP(s) Web GUI
Telnet
SSH
CLI commands
SNNP v2c and V3 standard (Private MIB)
Syslog
Layer management utility
Management VLAN tag
NTP client
Firmware upgrade
Configuration backup and restore
Factory default configuration
Utility
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ping test
RSSI and path loss calculation
Wireless site survey
Antenna alignment tool
System status
Link information
Advanced Technology
ŒŒ Multiple hopping (up to 10 hops with more than 100Mbps
throughput)
ŒŒ Wireless bandwidth limitation
ŒŒ Support mesh/mobility function in IWF 6330M
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Support 48VDC power over Ethernet
Form factor: pole/wall mountable
Dimension: 220 x 220 x 77 mm
Weight: 2.0kg (3.7kg mount kit included)
Outdoor IP67 rated
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Operating temperature: -35°C to 75°C
Storage temperature: -35°C to 75°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Ethernet
ŒŒ 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1
ŒŒ Compliant with :
-- IEEE 802.3/802.3u
-- Hardware based 10/100/1000, full/half, flow control auto
negotiation
Bridge Mode
RF Output Power: (± 2dBm)
Router Mode
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Layer 2 switching learning technology
Spanning tree protocol -IEEE 802.1d STP/IEEE 802.1w RSTP
Store-and-Forward
Static IP
DHCP server
IEEE 802.1q tag VLAN
IEEE 802.1p VLAN priority based QoS
Ordering Information
ŒŒ IWF 6320H-US (P/N: 10T00632003X0)
ŒŒ IWF 6320H-EU (P/N: 10T00632000X0)
ŒŒ IWF 6320M-US (P/N: 10T00632003X0)
ŒŒ IWF 6320M-EU (P/N: 10T00632002X0)
ŒŒ IWF 6330H-US (P/N: 10T00633003X0)
ŒŒ IWF 6330H-EU (P/N: 10T00633002X0)
ŒŒ IWF 6330M-US (P/N: 10T00633001X0)
ŒŒ IWF 6330M-EU (P/N: 10T00633002X0)
Industrial Network and Cloud Product Selection Guide
49
IWF 3310XH/XM
Industrial IP30 Hopping/Mesh/Mobility AP/CPE
Single RF, Dual Band, 802.11 a/b/g/n
Ethernet
Utility
ŒŒ 10/100/1000 Base-TX MDI/MDI-X RJ-45 x 1
ŒŒ Compliant with:
-- IEEE 802.3/802.3u
-- Hardware based 10/100/1000, full/half, flow control auto negotiation
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Bridge Mode
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Layer 2 Switching Learning Technology
Spanning Tree Protocol -IEEE 802.1d STP/IEEE 802.1w RSTP
Store-and-Forward
Static IP
DHCP server
IEEE 802.1q Tag VLAN
IEEE 802.1p VLAN Priority Based QoS
Router Mode
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Main Features
ŒŒ Single radios and compliant with IEEE 802.11a/b/g/n 2x2 MIMO
ŒŒ Fast roaming (hand-over switch time less than 20 ms)
ŒŒ Installation utilities: antenna alignment, distance calculation and
site survey tools
ŒŒ Compliant with IEEE 802.11a/b/g/n 2x2 MIMO
ŒŒ 300 Mbps data rate
ŒŒ 2 x 12 ~ 48VDC redundant power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IEEE 802.3at Power over Ethernet
Gigabit Ethernet RJ45
WEP, WPA, WPA2-PSK/EAP (IEEE 802.1X/RADIUS, TKIP and AES)
Operating temperature range from -40 to 80°C
FCC/CE certification
EN50155 compliant
DHCP server
RIP
IP filter
Port filter
Port forward
DMZ support
Static route
Security
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Hide SSID
MAC filtering ACL
WEP 64/128/152 bits
IEEE 802.1 x EAP-TLS/EAP-TTLS/MSCHAPv2/GTC
WPA/WPA2 PSK/EAP with TKIP/CCMP AES based encryption
Management
Product Overview
The IWF 3310X series are enterprise and carrier-grade 802.11n Industrial Wireless Access Point which offers customer a robust and high performing solution
for PTP/PTMP/Hotzone applications in both license-free 2.4GHz and 5GHz bands.
The IWF 3310X series are the most ideal candidate for Service Providers looking to deliver carrier-grade wireless services to multiple market segments
such as Railway train, Bus, MRT fast roaming, campuses Mesh network, hospitality, healthcare, warehousing and wider metropolitan area deployments.
IWF 3310X Series Category
Model
Radio Spec.
IWF3310XH
Hopping AP/CPE, IEEE 802.11 a/b/g/n Dual-Band 2x2 MIMO
IWF3310XM
Mesh/Mobility AP/CPE, IEEE 802.11 a/b/g/n Dual-Band 2x2 MIMO
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
HTTP(s) Web GUI
Telnet
SSH
CLI commands
SNNP v2c and V3 standard (private MIB)
Syslog
Layer management utility
Management VLAN tag
NTP client
Firmware upgrade
Configuration backup and restore
Factory default configuration
Ping test
RSSI and path loss calculation
Wireless site survey
Antenna alignment tool
System status
Link information
Advanced Technology
ŒŒ Multiple hopping (up to 10 hops with more than 100Mbps
throughput)
ŒŒ Wireless bandwidth limitation
ŒŒ Support mesh/mobility function in IWF 6330M
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Support 48Vdc power over Ethernet
Form Factor: DIN-rail and wall-mount
Dimension: 58.8 x 139.6 x 167 mm
Weight: 1.73kg
IP30 rated
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Operating temperature: -40°C to 80°C
Storage temperature: -40°C to 80°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Certification
ŒŒ FCC
ŒŒ CE
ŒŒ RoHS compliant
Package Contents
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IWF 3310X unit x 1
Terminal block x 1
Detachable Dual-Band antenna x 2 4/5dBi (2.4/5GHz)
Ethernet cable x 1
Wall mount kit x 1
Ordering Information
ŒŒ IWF 3310XH-US (P/N: 10T00331001X0)
ŒŒ IWF 3310XH-EU (P/N: 10T00331000X0)
ŒŒ IWF 3310XM-US (P/N: 10T00331003X0)
ŒŒ IWF 3310XM-EU (P/N: 10T00331002X0)
Specifications
Wireless Radio
ŒŒ Single 2 x 2 MIMO radio
Frequency Ranges
ŒŒ
ŒŒ
ŒŒ
ŒŒ
USA: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.725 ~ 5.825 GHz
Europe: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
Japan: 2.400 ~ 2.497 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
China: 2.400 ~ 2.483 GHz, 5.725 ~ 5.85 GHz
RF output power: (± 2dBm)
ŒŒ IEEE 802.11a
-- 21dBm@6M
-- 16dBm@54M
ŒŒ IEEE 802.11b
-- 21dBm@1M
-- 19dBm@11M
ŒŒ IEEE 802.11g
-- 23dBm@6M
-- 19dBm@54M
ŒŒ IEEE 802.11a/n HT20/40
-- 19dBm@MCS0/8
50
Industrial Network and Cloud Product Selection Guide
-- 14dBm@MCS7/15
ŒŒ IEEE 802.11g/n HT20
-- 21dBm@MCS0/8
-- 17dBm@MCS7/15
Receive Sensitivity
ŒŒ IEEE 802.11a
-- -91dBm@6M
-- -75dBm@54M
ŒŒ IEEE 802.11b
-- -91dBm@1M
-- -87dBm@11M
ŒŒ IEEE 802.11g
-- -91dBm@6M
-- -76dBm@54M
ŒŒ IEEE 802.11a/n HT20/40
-- -95/-91dBm@MCS0/8
-- -77/-73dBm@MCS7/15
ŒŒ IEEE 802.11g/n HT20/40
-- -95/-91dBm@MCS0/8
-- -79/-75dBm@MCS7/15
Industrial Network and Cloud Product Selection Guide
51
NIO 50
Industrial Wi-Fi Serial/Ethernet Device Server
117.30
112.60
112.60
Dimension Drawing
Main Features
Support transparent Modbus TCP/RTU, Modbus ASCII & MQTT
Web-based configuration
9600~115200 bps baudrate for RS-232/422/485 transmissions
Secure data access with WPA, WPA2
1 x 10/100 fast Ethernet port
ŒŒ Support 9~36V wide range DC input with 2 pin Phoenix contact
terminal block
ŒŒ Support -20~70°C extended operating temperature
ŒŒ LED indicators to display: power, serial status and Wi-Fi RSSI signal
strength
109.20
86.60
25
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Product Overview
Certification
NIO 50 brings IoT connectivity into factories, gearing unconnected industrial equipment and machines for smart manufacturing and Industry 4.0. The
NIO 50 delivers data acquisition capability, IoT connectivity, convenience of remote monitoring, and industrial durability to provide end-to-end connectivity
for the Industrial Internet of Things (IIoT). For Fieldbus-based controllers, legacy manufacturing machines, and serial-based devices, NIO 50 fills the
communication gap between edge nodes to the cloud, enabling field data to be harnessed for manufacturing process optimization, remote management,
and preventive maintenance.
ŒŒ EMI: FCC, CE Class A
ŒŒ RF:
-- FCC: PART15C
-- CE: EN 300328
ŒŒ EN60950-1
ŒŒ EMC: EN 301 489-1/17, FCC part 15 subpart B, EN 55022/55024
Ordering Information
ŒŒ NIO 50 (P/N: 10T00005000X0)
Industrial Wi-Fi serial/Ethernet device server
Specifications
CPU Support
SW Features
ŒŒ Onboard STM32F407ZE processor
ŒŒ OS: FreeRTOS
Main Memory
ŒŒ Management: nCare, Web GUI
ŒŒ 512KB (embedded Flash in STM32)
ŒŒ Web GUI for configuration
Serial Port
ŒŒ Ethernet firmware upgrade
ŒŒ 1 x RS232/422/485 (software selectable)
Wireless
ŒŒ Wi-Fi: 802.11 b/g/n 1x1
Ethernet
ŒŒ 1 x 10/100 Base-TX
ŒŒ MDI/MDIX Auto cross
Reset
ŒŒ 1 x Reset/restore to default push button
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
52
ŒŒ SNTP client (real IP, static)
ŒŒ Factory default/reset
(press reset button 3 seconds interval for factory default)
Environment Protection
ŒŒ Operating temperature: -20°C~70°C
ŒŒ Storage temperature: -40°C~85°C
Relative Humidity
ŒŒ Operating: 5%~95%, non-condensing
DC 9~36V with 2 pins Phoenix contact terminal block
Din-Rail (optional)/wall mountable
Dimension: 110 mm x 87 mm x 25 mm
Weight: 600 g
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
53
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
Rugged & Ultra-Fast
Gigabit Industrial
Wi-Fi Solution for
Video Surveillance
NEXCOM Product
Strengths
from other RF interference sources, the IWF 500 product family
radio provides reliable sustained bandwidth over long distances to
is not only ideal for outdoor areas, but also ideal for harsh factory
ensure smooth video playback.
environments where physical cabling is impractical.
Requirements of the application:
Ultra-fast 802.11ac Wi-Fi
Reinforces Seamless
Transmission for Intensive
Video Data
Multi-topology Support for Application
Flexibility
NEXCOM's IWF 503/4 product family of
backbone networks for point-to-point (PtP) and point-to-
NEXCOM's IWF solution:
industrial IP55 outdoor Wi-Fi is based on
multipoint (PtMP) applications, and incorporates high-power
■■
the advanced IEEE 802.11ac standard,
radio modules to provide ample amount of network bandwidth at
offering wireless broadband performance
transmission distances ranging from 500m to 3km (Figure 2).
Waterproof and dust-tight protection.
■■
Sustained and reliable wireless transmission of large data volumes.
■■
Embedded antenna for easy installation and cost effectiveness.
The IWF 500 product family offers quick deployment of wireless
The IWF 500 product family provides IP55-rated waterproof
and dust-tight protection to withstand harsh conditions in
outdoor and factory environments.
at up to Gigabit speeds.
As Wi-Fi technology advances and Industry 4.0 (I4.0) gains traction, wireless
■■
■■
Main highlights of the IP55 grade IWF 503/4 outdoor Wi-Fi series:
IWF 503 and IWF 504D offer over 1Gbps data rate with IEEE
802.11ac technology to provide large bandwidth capacity for
transmission is gradually becoming the main medium for connecting and
The IWF 504D industrial outdoor Wi-Fi
■■
Reliable wireless backbone network for video transmission.
monitoring devices in remote areas, such as video surveillance in outdoor and
features IEEE 802.11ac and IEEE 802.11b/
■■
Support advanced IEEE 802.11ac with Gigabit bandwidth.
factory environments. Such wireless video surveillance applications often require
g/n with 2x2 MIMO technology and a
■■
IP55 protection and compact design for both outdoor and
embedded and detachable antenna
a reliable wireless network with future-proof bandwidth capacity to transmit
maximum data rate of up to 1167Mbps.
tough indoor environment in production floors.
models which can be flexibly
video data from the field to the central control center (Figure 1).
Equipped with a dual radio design, IWF 504D
■■
High-power RF design (27dBm) for long distance communication.
configured to suit
can operate on one 5GHz band and
■■
24VDC Passive PoE input.
different application
wireless video data transmission.
■■
provide a secondary 2.4GHz band for
Wi-Fi client access, enabling factory
operators to remotely access and monitor
the surveillance system in real-time.
requirements.
PtP/ PtMP Video Surveillance
Application for Factories
PtP/PtMP video surveillance applications require robust and resilient
Figure 1. NEXCOM offers Wi-Fi video streaming solutions ideal for harsh
outdoor and factory environments.
IP55 Ruggedness for
Outdoor Areas and Tough
Industrial Production Floors
The IWF 500 product family features
Figure 3. NEXCOM PtP/
PtMP video surveillance
applications
wireless backbone networks to reliably stream video data from harsh
field sites to central control (Figure 3). NEXCOM's IWF 500 product
family equipped with IEEE 802.11ac technology and dual high-power
Featuring a wide operating temperature
range of -35 to 75 degrees Celsius, a
nCare
P2P/
P2MP
Control Center
Switch
compact housing with IP55-rated
IWF 503
Steel Plant
IWF 503
waterproof and dust protection, and highpower RF design to effectively resist noises
IWF 503
Model Name
IWF 502/502D
IWF 503/503D
IWF 504D
PtP/PtMP AP/CPE
IEEE 802.11b/g/n 2x2 MIMO
1
IWF 501: 12dBi
Embedded Antenna,
IWF 501D: 2 x RP-xSMA Female
PtP/PtMP AP/CPE
IEEE 802.11a/n 2x2 MIMO
1
IWF 502: 14dBi
Embedded Antenna,
IWF 502D: 2 x PR-SMA Female
PtP/PtMP AP/CPE
802.11ac/an/a 3x3 MIMO
1
IWF503: 10dBi
Embedded Antenna,
IWF503D: 3 x RP-SMA Female
PtP/PtMP AP/CPE
802.11ac+b/g/n 2x2 MIMO
2
IWF501D: 2 x RP-SMA Female
IWF502D: 2 x RP-SMA Female
IWF503D: 3 x RP-SMA Female
4 x RP-SMA Female
1
1
1
1
Cement Plant
Category
WLAN Standard
Number of Radios
Number of Antenna
TCP throughput 398 Mbps
Type of RF
Connector
Number of
WAN Port
Number of
LAN Port
Type of LAN
IP Rating
Conformal Coating
IPTV simulated throughput: 416 Mbps
About 150+camera (2M)
Figure 2. TCP throughput at 1km distance
with 1km link.
54
IWF 501/501D
Photo
Switch
APP (Phone/Pad)
Product Selection Guide
4
1
1
1
1
RJ45
IP55
RJ45
IP55
RJ45
IP55
RJ45
IP55
N/A
N/A
N/A
N/A
Wall/Pole Mount
-35°C ~ +70°C
Wall/Pole Mount
-35°C ~ +70°C
Wall/Pole Mount
-35°C ~ +75°C
Wall/Pole Mount
-35°C ~ +75°C
Mounting Style
Temperature
Dimension
(H x W x D) mm
PoE Input
DC Input
Certification
Safty
280 x 93 x 45
280 x 93 x 45
240 x 135 x 58
240 x 135 x 58
Passive PoE: 12~24V
N/A
CE, FCC
EN60950-1
Passive PoE: 12~24V
N/A
CE, FCC
EN60950-1
Operation Mode
AP/Client/Router/WISP
AP/Client/Router/WISP
GUI Management
GUI Management
Passive PoE: 24V
N/A
CE, FCC
EN60950-1
AP/Client Bridge/
AP Router/Client Router
SNMP/GUI/nCare Management
Passive PoE: 24V
N/A
CE, FCC
EN60950-1
AP/Client Bridge/
AP Router/Client Router
SNMP/GUI/nCare Management
Management Mode
55
IWF 501/501D
IP55 Outdoor AP/CPE Single Radio Single Band, 802.11b/g/n
IWF 502/502D
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Main Features
AP/Client/Bridge/Router mode supported
Compliant with IEEE 802.11 b/g/n 2x2 MIMO
300 Mbps data rate
24VDC PoE input
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Fast Ethernet RJ45
WEP, WPA, WPA2
Operating temperature range from -35 to 75°C
FCC/CE certification
ŒŒ
ŒŒ
ŒŒ
ŒŒ
AP/Client/Bridge/Router mode supported
Compliant with IEEE 802.11 a/n 2x2 MIMO
300 Mbps data rate
24VDC PoE input
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Fast Ethernet RJ45
WEP, WPA, WPA2
Operating temperature range from -35 to 75°C
FCC/CE certification
Product Overview
Product Overview
IWF 501series are cost effective 802.11b/g/n outdoor AP/CPE operating in 2.4GHz band. It has a build-in dual-polarity antenna or detachable SMA connectors
with dual Ethernet ports. The IWF 501 series support passive 24VDC PoE allowing easy installation without any environment limitation.
IWF 502 series are cost effective 802.11a/n outdoor AP/CPE operating in 5GHz band. It has a build-in dual-polarity antenna or detachable SMA connectors
with dual Ethernet ports. The IWF 502 series support passive 24VDC PoE allowing easy installation without any environment limitation.
IWF 501 Series Category
IWF 502 Series Category
Model
Description
Antenna
Model
Description
Antenna
IWF 501
Outdoor AP/CPE 2.4GHz 802.11 b/g/n 2x2
12dBi embedded antenna
IWF 502
Outdoor AP/CPE 5GHz 802.11 a/n 2x2
14dBi embedded antenna
IWF 501D
Outdoor AP/CPE 2.4GHz 802.11 b/g/n 2x2
2 x SMA connectors
IWF 502D
Outdoor AP/CPE 5GHz 802.11 a/n 2x2
2 x SMA connectors
Specifications
Wireless Radio
ŒŒ 2 x 2 MIMO radios
Frequency Ranges
ŒŒ
ŒŒ
ŒŒ
ŒŒ
USA: 2.412 ~ 2.462 GHz
Europe: 2.412 ~ 2.472 GHz
Japan: 2.412 ~ 2.484 GHz
China: 2.412 ~ 2.472 GHz
RF Output Power: (± 2dBm)
ŒŒ IEEE 802.11g/n HT20
-- 27± 2dBm@MCS0/8
-- 22± 2dBm@MCS7/15
ŒŒ IEEE 802.11g/n HT40
-- 27± 2dBm@MCS0/8
-- 22± 2dBm@MCS7/15
Receive Sensitivity
ŒŒ IEEE 802.11g/n HT20
-- -91 dBm@MCS0/8
-- -72 dBm@MCS7/15
ŒŒ IEEE 802.11g/n HT40
-- -88 dBm@MCS0/8
-- -69dBm@MCS7/15
Ethernet
ŒŒ 10/100 Base-TX MDI/MDI-X RJ-45 x 2
56
IP55 Outdoor AP/CPE Single Radio Single Band, 802.11 a /n
Industrial Network and Cloud Product Selection Guide
Security
ŒŒ Hide SSID/MAC filtering ACL/WEP/WPA/WPA2
Management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
HTTP(s) web GUI
Firmware upgrade
Configuration backup and restore
Factory default configuration
SNMP V1/V2c
Utility
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Wireless site survey
System Status
Link information
Bandwidth control
Distance adjustment
Adjustable output power
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Support 24VDC power over Ethernet
Dimension: 280 x 90 x 47 mm
Weight: 342g
Outdoor IP55 rated
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Operating temperature: -35°C to 75°C
Storage temperature: -35°C to 75°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Specifications
Wireless Radio
ŒŒ 2 x 2 MIMO radios
Frequency Ranges
ŒŒ
ŒŒ
ŒŒ
ŒŒ
USA: 5.15 ~ 5.25 GHz, 5.725 ~ 5.825 GHz
Europe: 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
Japan: 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
China: 5.725 ~ 5.85 GHz
RF Output Power: (± 2dBm)
ŒŒ IEEE 802.11a/n HT20
-- 27± 2dBm@MCS0/8
-- 21± 2dBm@MCS7/15
ŒŒ IEEE 802.11a/n HT40
-- 27± 2dBm@MCS0/8
-- 21± 2dBm@MCS7/15
Receive Sensitivity
ŒŒ IEEE 802.11a/n HT20
-- -94dBm@MCS0/8
-- -72dBm@MCS7/15
ŒŒ IEEE 802.11a/n HT40
-- -91dBm@MCS0/8
-- -69dBm@MCS7/15
Ethernet
ŒŒ 10/100 Base-TX MDI/MDI-X RJ-45 x 2
Security
ŒŒ Hide SSID/MAC filtering ACL/WEP /WPA / WPA2
Management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
HTTP(s) web GUI
Firmware upgrade
Configuration backup and restore
Factory default configuration
SNMP V1/V2c
Utility
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Wireless site survey
System status
Link information
Bandwidth control
Distance adjustment
Adjustable output power
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Support 24VDC power over Ethernet
Dimension: 280 x 90 x 47 mm
Weight: 342g
Outdoor IP55 rated
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Operating temperature: -35°C to 75°C
Storage temperature: -35°C to 75°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Industrial Network and Cloud Product Selection Guide
57
IWF 503 Series
IP55 Outdoor AP/CPE Single Radio Single Band, 802.11 ac/an/a
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
AP/WPA2 mixed
W
WPA2-personal (PSK+CCMP/AES)
WPA2- enterprise (802.1X certification)
Hidden ESSID support
MAC address filtering (MAC ACL)
Station isolation
System Management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
eb-based administration
W
SNMP V1/V2c
Provides event log
SYSLOG information support
Statistics
Configuration backup and restore
One-button-click to restore factory default setting
Firmware upgrade
WES
Built-in Servers & Client Interfaces to Other Services
IWF 503
IWF 503D
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
AP/client bridge/AP router/client router/WDS mode supported
Compliant with IEEE 802.11 ac/a/n 3x3 MIMO
1300 Mbps data rate
24VDC PoE input
ŒŒ
ŒŒ
ŒŒ
ŒŒ
1 WAN+1 LAN ports GbE Ethernet RJ45
WEP, WPA, WPA2
Operating temperature range from -35 to 75°C
FCC/CE certification
ŒŒ D
HCP client
ŒŒ SNMP V1/V2c client
Certification
ŒŒ F
CC
ŒŒ CE
ŒŒ RoHS compliant
Package Contents
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IWF 503 unit x 1
24V PoE injector
Steel clamps* 2 for pole mount
QIG
* Note:
The available RF output power will be given by certified power in different region
Ordering Information
ŒŒ IWF 503-EU (P/N: 10T00050300X0)
ŒŒ IWF 503-US (P/N: 10T00050301X0)
IEEE 802.11 ac/an/a with built-in 10dBi directional antennas
Physical and Power
ŒŒ IWF 503D-EU (P/N: 10T00050302X0)
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ IWF 503D-US (P/N: 10T00050303X0)
4VDC passive PoE
2
Wall/Pole mountable
Dimension: 240x135x58 mm
Weight: TBD
IEEE 802.11 ac/an/a with SMA connectors to supports users’ choice of
external antennas
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
perating temperature: -35~75°C
O
Storage temperature: -40~80°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Product Overview
IWF 503 is an IP55 outdoor cost effective AP/CPE router. IWF 503 is single radio AP/CPE with IEEE802.11ac/an/a 3x3 MIMO with high RF power solution.
The maximum data rate up to 1.3Gbps with two SKUs for internal patch antenna (IWF 503) and external antenna (IWF 503D) by customer selectable for
high gain in long distance transmission. IWF 503 also design as high power solution, up to 27dBm in 5GHz.
Specifications
Wireless Radio
ŒŒ 1 x IEEE 802.11ac/an/a 3x3 MIMO
Frequency Ranges
ŒŒ
ŒŒ
ŒŒ
ŒŒ
SA: 5.15 ~ 5.35 GHz, 5.5 ~ 5.7 GHz, 5.725 ~ 5.825 GHz
U
Europe: 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
Japan: 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
China: 5.725 ~5.85 GHz
RF Output Power: IEEE 802.11ac (±2dBm)
ŒŒ IEEE802.11a
-- 27dBm@6M
-- 25dBm@54M
ŒŒ IEEE802.11ac/n HT20
-- 25dBm@MCS0
-- 23dBm@MCS9
ŒŒ IEEE802.11ac/n HT40
-- 25dBm@MCS0
-- 23dBm@MCS9
ŒŒ IEEE802.11ac/n HT80
-- 25dBm@MCS0
-- 23dBm@MCS9
Receive Sensitivity: IEEE 802.11ac
ŒŒ IEEE802.11a
-- -95dBm@6M
-- -77dBm@54M
ŒŒ IEEE802.11ac/n HT20
-- -82dBm@MCS0
-- -71dBm@MCS7
58
Industrial Network and Cloud Product Selection Guide
-- -70dBm@MCS8
ŒŒ IEEE802.11ac/n HT40
-- -92dBm@MCS0
-- -72dBm@MCS7
-- -66dBm@MCS9
ŒŒ IEEE802.11ac/n HT80
-- -88dBm@MCS0
-- -68dBm@MCS7
-- -62dBm@MCS9
Hardware
ŒŒ W
AN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1
ŒŒ LAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1
ŒŒ Compliant with :
-- IEEE802.3 / 802.3u
-- Hardware based 10/100/1000, full/half, flow control auto
negotiation
ŒŒ Push buttons: 1 x Reset
ŒŒ LED: 1 x Power& Status; 1 x WAN; 1 x Wi-Fi
ŒŒ SMA: 3 x with RP-SMA connectors
Operating Mode
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
P
A
Client bridge
AP router
Client router
WDS
Security
ŒŒ WEP (64/128/152)
Industrial Network and Cloud Product Selection Guide
59
IWF 504D
IP55 Outdoor AP/CPE Dual Radio Dual Band, 802.11 ac+b/g/n
ŒŒ IEEE802.11ac VHT 80Mhz
-- -90dBm@MCS0
-- -72dBm@MCS7
-- -68dBm@MCS8
Receive Sensitivity: IEEE 802.11 b/g/n
ŒŒ IEEE802.11b
-- -93dBm@1M
-- -91dBm@11M
ŒŒ IEEE802.11g
-- -94dBm@6M
-- -80dBm@54M
ŒŒ IEEE802.11g/n HT20
-- -94dBm@MCS0/8
-- -77dBm@MCS7/15
ŒŒ IEEE802.11g/n HT40
-- -89dBm@MCS0/8
-- -73dBm@MCS7/15
Hardware
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
AP/Client bridge router/Client router/WDS mode supported
Compliant with IEEE 802.11 ac+b/g/n 2x2 MIMO
867+300 Mbps data rate
24VDC PoE input
ŒŒ
ŒŒ
ŒŒ
ŒŒ
1 WAN+1 LAN ports GbE Ethernet RJ45
WEP, WPA, WPA2
Operating temperature range from -35 to 75°C
FCC/CE certification
ŒŒ W
AN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1
ŒŒ LAN: 10/100/1000 Base-TX MDI/MDIX RJ-45 x 1
ŒŒ Compliant with :
-- IEEE802.3/802.3u
-- Hardware based 10/100/1000, full/half, flow control auto
negotiation
ŒŒ Push buttons: 1 x reset
ŒŒ LED: 1 x power & status; 1 x WAN; 1 x Wi-Fi
ŒŒ SMA: 4 x with RP-SMA connectors
Operating Mode
Product Overview
IWF 504D is an IP55 outdoor cost effective AP/CPE router. IWF 504D is dual radios AP/CPE with IEEE802.11ac+b/g/n 2x2 MIMO with high RF power solution.
The maximum data rate up to 867+300Mbps with external antenna which by customer selectable for high gain in long distance transmission. IWF 504D
also design as high power solution, up to 27dBm in both 2.4GHz and 5GHz.
Specifications
Wireless Radio
RF Output Power: IEEE 802.11 b/g/n (±2dBm)
ŒŒ 1 x IEEE 802.11ac 2x2 MIMO
ŒŒ 1 x IEEE 802.11b/g/n 2x2 MIMO
ŒŒ IEEE802.11b
-- 27dBm@1M
-- 24dBm@11M
ŒŒ IEEE802.11g
-- 27dBm@6M
-- 24dBm@54M
ŒŒ IEEE802.11g/n HT20
-- 23dBm@MCS0/8
-- 19dBm@MCS7/15
ŒŒ IEEE802.11g/n HT40
-- 22dBm@MCS0/8
-- 18dBm@MCS7/15
Frequency Ranges
ŒŒ USA : 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.5 ~ 5.7 GHz, 5.725 ~ 5.825
GHz
ŒŒ Europe: 2.400 ~ 2.483 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
ŒŒ Japan: 2.400 ~ 2.497 GHz, 5.15 ~ 5.35 GHz, 5.47 ~ 5.725 GHz
ŒŒ China: 2.400 ~ 2.483 GHz, 5.725 ~5.85 GHz
RF Output Power: IEEE 802.11ac/an/a (±2dBm)
ŒŒ IEEE802.11a
-- 27dBm@6M
-- 24dBm@54M
ŒŒ IEEE802.11a/n HT20
-- 27dBm@MCS0
-- 24dBm@MCS7
-- 23dBm@MCS8 in VHT20
ŒŒ IEEE802.11a/n HT40
-- 26dBm@MCS0
-- 23dBm@MCS7
-- 22dBm@MCS8 in VHT40
ŒŒ IEEE802.11ac VHT 80Mhz
-- 24dBm@MCS0
-- 22dBm@MCS7
-- 21dBm@MCS8
60
Industrial Network and Cloud Product Selection Guide
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
AP
AP router
Client router
Client bridge
WDS
Security
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
EP
W
WAP/WPA2 mixed
WPA2-personal (PSK+CCMP/AES)
Hidden ESSID support
MAC address filtering (MAC ACL)
Station isolation
System Management
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
eb-based administration
W
SNMP V1/V2c; NEXCOM private MIB
SYSLOG information support
Statistics
Configuration backup and restore
One-button-click to restore factory default setting
Firmware upgrade
Telnet (SSH)
Support nCare management system
Built-in Servers & Client Interfaces to Other Services
ŒŒ DHCP client
ŒŒ SNMP V1/V2c client (coming soon)
Physical and Power
ŒŒ
ŒŒ
ŒŒ
ŒŒ
2~24VDC passive PoE
1
Wall/pole mountable
Dimension: 240 x 135 x 58 mm
Weight: 442g
Environment Protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
perating temperature: -35~75°C
O
Storage temperature: -40~80°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Certification
ŒŒ FCC
ŒŒ CE
ŒŒ RoHS compliant
Package Contents
ŒŒ
ŒŒ
ŒŒ
ŒŒ
IWF 504D unit x 1
24V PoE injector
Steel clamps* 2 for pole mount
QIG
* Note:
The available RF output power will be given by certified power in different region
Ordering Information
ŒŒ IWF 504D-EU (P/N: 10T00504D00X0)
ŒŒ IWF 504D-US (P/N: 10T00504D01X0)
Receive Sensitivity: IEEE 802.11ac/an/a
ŒŒ IEEE802.11a
-- -95dBm@6M
-- -80dBm@54M
ŒŒ IEEE802.11a/n HT20
-- -95dBm@MCS0
-- -76dBm@MCS7
-- -72dBm@MCS8 in VHT20
ŒŒ IEEE802.11a/n HT40
-- -92dBm@MCS0
-- -75dBm@MCS7
-- -71dBm@MCS8 in VHT40
Industrial Network and Cloud Product Selection Guide
61
Industrial Network and Cloud Product Selection Guide
Industrial Network and Cloud Product Selection Guide
process automation deployments. With more field devices being deployed in
increasingly larger plants, using wired connectivity solutions for such large-scale
Manageable ISA100.11a &
WirelessHART Compliant
Gateway
The NIO 200 series supports two types of deployment architectures:
mesh backbone ideal for large-scale deployments in locations with
All-in-One Gateway and Distributed Network (Figure 1). Currently,
wiring limitations and offers redundant communication paths to
All-in-One Gateway is the most widely adopted architecture in the
ensure high network uptime.
NEXCOM nCare manager for remote
Flexible Deployment for Critical Field Wireless Networks
Support of Multiple Field Protocols over ISA100.11a
central management . Using nCare,
■■
industry. This architecture consists of a single gateway serving as
the main communication device for multiple field devices. Although
ideal for simple deployments, All-in-One Gateway lacks the flexibility
to scale in size. Distributed Gateway,on the other hand, uses a Wi-Fi
The NIO 200 series is also supported by
NIO 200 bridges communication between Wi-Fi Mesh backbone
and ISA100.11a/WirelessHART field wireless networks.
administrators can easily monitor and
manage device status and mesh network
Flexible distributed topology with backbone router.
links through an intuitive, graphical user
■■
Reliable wireless communication infrastructure ideal for oil, gas
interface, simplifying the management of
Furthermore, process automation applications such as chemical, oil and gas
large-scale deployments.
(such as HART and Modbus).
WirelessHART are quickly becoming the mainstream wireless communication
protocols for process automation.
NIO 200IDR
field wireless network.
ISA100.11a (IEC 62734) or WirelessHART support and Wi-Fi mesh backbone
NEXCOM's EZ Mesh Wi-Fi backbone
technology, including a design that focuses on the communication and
technology, which features proprietary
management requirements of Industry 4.0.
self-forming and self-healing functions
to help construct a reliable and robust
wireless mesh backbone for connecting
Figure 1. The NIO 200 series offers two types of deployment architectures:
All-in-One Gateway and Distributed Network.
Ethernet
NIO 200
Standalone Gateway
Ethernet
Control Center
NIO 200
ISA100 Backbone
Router
Chemical plants, oil and gas refineries
environmental conditions and require
NIO 200IDR NIO 200IDR
Modbus
NIO 200IDG
NIO 200IDR
NIO 200IDR
NIO 200HAG
HART
NIO 200IDR NIO 200IDR
Robust Communication over ISA100.11a/WirelessHART Field
Designed for Mission-Critical Applications
Wireless Networks
■■
Redundant power with DC and PoE input.
Spectrum management technology shields field radio signals
■■
Dual high-power 5GHz Wi-Fi mesh ensures a double-link backbone.
from noise interferences.
■■
Rugged, level 4 ESD, EFT and surge protection.
■■
Anti-explosive protection (C1D2 and ATEX).
■■
High wireless radio sensitivity.
■■
- Channel hopping
2.4 GHz Band Congestion
- Channel blacklisting
Micowave
Ovens
- Clear channel assessment
ISA100/WirelessHART
Channels 11-26
2.4 MHz
5GHz
Wi-Fi Mesh
Bluetooth
Clear Channel Assessment
2.400
5 MHz
1
50%
802.11b/g
Frequency (GHz)
2.4835
0
3
2
Channel Hopping
Blacklisted Channels
Emerson WirelessHART Device
2.4835 MHz
NEXCOM WirelessHART Device
200m
1000m
Distance
600m at near 0% PER
ruggedized systems. To provide reliable
NIO 200
ISA100 Backbone
Router
NIO 200
All-in-One
Gateway
operation, the NIO 200 series is C1D2
and ATEX certified for explosion proof,
and complies with level 4 criteria of the
IEC 61000 standard for electrostatic
all products in the NIO 200 lineup accept
wide-range DC input of 12V to 48V and
Distributed Network
Topology
All-in-One Gateway
Topology
Product Selection Guide
Model Name
NIO 200IDR
NIO 200IDG
NIO 200IAG/NIO 200HAG
802.11 a/n
802.11 a/n
ISA100
ISA100
802.11 a/n
NIO 200 IAG:ISA100
NIO 200HAG: WirelessHART
N/A
Standalone gateway
All-in-One gateway
Mesh/AP
10/100/1000
IP67
-40°C to +75°C
IEEE802.3at
12 ~ 48V
Mesh/AP
10/100/1000
IP67
-40°C to +75°C
IEEE802.3at
12 ~ 48V
Mesh/AP
10/100/1000
IP67
-40°C to +75°C
IEEE802.3at
12 ~ 48V
SNMP V1/V2c/Web GUI/nCare
SNMP V1/V2c/Web GUI/nCare
SNMP V1/V2c/Web GUI/nCare
CE, FCC
UL 60950-1, UL 60950-22
CID2/ATEX
CE, FCC
UL 60950-1, UL 60950-22
CID2/ATEX
CE, FCC
UL 60950-1, UL 60950-22
CID2/ATEX
discharge, surge and electrical fast
transients protection. For power input,
a secondary PoE power input for power
redundancy.
High Wireless Radio
Frequency (RF) Sensitivity
For wireless sensor/instrument communication,
the NIO 200 series features a radio module
with increased receiver sensitivity capable of
providing more than twice the transmission
distance over other similar devices using the
same radio frequency (RF) power.
62
Control Center
HART
are often located in areas with tough
sh
Me
-Fi
Wi Line
NIO 200
ISA100 Backbone
Router
C1D2 and ATEX Certified for
Anti-Explosion
NIO 200IDG
101
field devices with wiring onstraints.
NIO 200IDR
Native
Modbus
In addition to ISA100.11a or WirelessHART
support, the NIO 200 series also utilizes
Enable consolidation of a diverse range of field devices into one
Native
Unique Wi-Fi Mesh Backbone
Technology
In response to this demand, NEXCOM offers the NIO 200 series which features
■■
and chemical process automation.
processing require a reliable network with low latency, in which most common
protocols such as ZigBee and LoRa lack to offer. As a result, ISA100.11a and
Open, object-oriented wireless framework accommodates legacy
field device/instruments regardless of communication protocols
■■
deployments is complex and costly compared to wireless connectivity solutions.
■■
Error Rate
The demand for maximized productivity has led to an increase in large-scale
NIO 200 Series Supported
Deployment Architectures
ISA100.11a/WirelessHART
NEXCOM's ISA100.11a/
WirelessHART Gateway
for Wireless Process
Automation
NEXCOM Product
Strengths
Photo
WLAN Standard
Wireles Field
Protocol
Gateway
Function
Wi-Fi Mode
Ethernet Speed
IP Rating
Temperature
PoE Type
DC Input Range
Network
Management
Certification
Safety
Anti-Explosive
63
NIO 200 Series
ISA100/WirelessHART Process Automation Wireless Gateway
ŒŒ
ŒŒ
ŒŒ
ŒŒ
YSLOG information support
S
Configuration backup and restore
One-button-click to restore factory default setting
Firmware upgrade
Built-in Servers & Client Interfaces to Other Services
ŒŒ SNMP V1/V2c/V3 client
Physical and Power
ŒŒ 1
2~48 VDC
PoE (standard PoE 802.3at)
ŒŒ Wall/pole mountable
ŒŒ Dimension: 256mm x 226mm x 91mm
ŒŒ Weight: TBD
Environment Protection
NIO 200 C1D2
NIO 200 ATEX
ŒŒ
ŒŒ
ŒŒ
ŒŒ
perating temperature: -40~75°C (altitude : up to 3000m)
O
Storage temperature: -40~80°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Certification
Main Features
ŒŒ Full Mesh topology: robust wireless connectivity from ISA100/
WirelessHART field device coverage to Wi-Fi backbone
ŒŒ Perfect triple play infrastructure: video surveillance via high
throughput Wi-Fi backbone ensures video transmission without
compromising video performance
ŒŒ Dual Wi-Fi Mesh path establishes better stability in backbone transmission
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Wide temperature range, high EMC immunity to Surge, ESD and EFT
Suitable for deployment in hazardous environments
Incorporates power redundancy (DC and PoE)
Distributed network topology provides scalable infrastructure: easy
integration and cost saving
ŒŒ UL 60950-1; 60950-22
ŒŒ Radio approvals
-- FCC Part 15.247, 15.407
-- RSS-210
-- AS/NZS 4268.2003
-- EN 300 328
-- EN 301 893
ŒŒ EMI and susceptibility
-- FCC part 15.107, 15.109
-- EN 301 489-1, -17
Anti-Explosive Certification
ŒŒ UL: Class I, Division 2, Groups A, B, C and D
ŒŒ ATEX: Class I, Zone 2; Ex nA II, T5
Product Overview
ISA100 Capabilities
Wireless Communication Interface Specifications
Standard IEEE
802.15.4
Data Rate
250 kbps
Modulation
Q-PSK
Spread Spectrum
DSSS
RF Output Power
Max +15 dBm
Sensitivity
-95 dBm
Connector
N type
Antenna
5 dBi@ 2.4GHz
Performance Parameters
NIO200IAG: 100 field instruments
Scalability
NIO200IDG: 200 field instruments
NIO200IDR: 50 field instruments
Mesh Network Depth 3 hops
Field Device Join Time As low as 20 seconds
Reporting Rate
Supported rates are 1, 5, 10, 20, 30 and 60
seconds; 10 devices publishing/second
Ordering Information
ISA 100
WirelessHART
All-in-One
Gateway
NIO 200IAG
(P/N: 10T00021002X0)
NIO 200HAG
(P/N: 10T00021000X0)
Distributed
Gateway
NIO 200IDG
(P/N: 10T00021003X0)
-
Distributed
NIO 200IDR
Backbone Router (P/N: 10T00021004X0)
-
NEXCOM NIO 200 is a powerful distributed network topology ISA100.11a access point integrating 802.11n Mesh technology. With ISA100.11a/WirelessHART
technology, NIO 200 can establish fully Mesh network to ensure robust and reliable communication for mission-critical industrial wireless applications. The
integration of both 802.11n Mesh & ISA100.11a/WirelessHART technology gives a full Mesh infrastructure from field devices to Wi-Fi backbone, thus a
concrete wireless connectivity can be assured. It’s designed to meet CID2 and ATEX certified requirement and is perfect solution to critical data monitoring
and sensing in oil & gas, chemical plant, etc…
Specifications
Wireless Radio
ŒŒ IEEE802.11a/n x 2, MIMO 2 x 2
ŒŒ IEEE802.15.4, 1 Tx, 1 Rx
Wi-Fi Frequency Ranges
ŒŒ
ŒŒ
ŒŒ
ŒŒ
SA: 5.15~5.35 GHz, 5.5~5.7 GHz, 5.725~5.825 GHz
U
Europe: 5.15~5.35 GHz, 5.47~5.725 GHz
Japan: 5.15~5.35 GHz, 5.47~5.725 GHz
China: 5.725~5.85 GHz
RF Output Power: IEEE 802.11a
ŒŒ 802.11a
-- 28 dBm with 2 antennas
ŒŒ 802.11n (HT20)
-- 27 dBm with 2 antennas
ŒŒ 802.11n (HT40)
-- 27 dBm with 2 antennas
* Note:
The available RF output power will be given by certified power in different region
Hardware
ŒŒ W
AN: 10/100/1000 Base-TX MDI/MDIX
ŒŒ LAN: 10/100/1000 Base-TX MDI/MDIX
ŒŒ Compliant with:
-- IEEE802.3/802.3u
-- Hardware based 10/100/1000, full/half, flow control auto
negotiation
64
Industrial Network and Cloud Product Selection Guide
ŒŒ Push buttons: 1 x reset/restore to default
ŒŒ LED:
-- 2 x Ethernet
-- 2 x 11an radio
-- 1 x IWSN radio
-- 1 x Power/status
ŒŒ N-Type: 5X N-type connector
Compliance
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
L 60950-1; 60950-22
U
IEC 60950, 2nd edition
EN 60950, 2nd edition
IEC 61000-4-2 level 4 ESD immunity
IEC 61000-4-5 level 4 AC surge immunity
IEC 61000-4-4 level 4 electrical fast transient burst immunity
Wi-Fi Security
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
EP (64/128/152)
W
WAP/WPA2 mixed
WPA2-personal (PSK+CCMP/AES)
Hidden ESSID support
MAC address filtering (MAC ACL)
Station isolation
System Management
ŒŒ nCare, Web GUI management
ŒŒ SNMP V1/V2c/V3
ŒŒ Event log
Industrial Network and Cloud Product Selection Guide
65
Headquarters
NEXCOM International Co., Ltd.
9F, No.920, Chung-Cheng Rd., ZhongHe District, New Taipei City, 23586, Taiwan, R.O.C.
Tel: +886-2-8226-7786
Fax: +886-2-8226-7782
www.nexcom.com
America
China
Europe
USA
NEXCOM USA
NEXCOM China
United Kingdom
NEXCOM EUROPE
2883 Ba yview Drive,
Fremont CA 94538, USA
Tel: +1-510-656-2248
Fax: +1-510-656-2158
Email: sales@nexcom.com
www.nexcom.com
1F & 2F, Block A, No.16 Yonyou Software Park,
No.68 Beiqing Road, Haidian District,
Beijing, 100094, China
Tel: +86-10-5704-2680
Fax: +86-10-5704-2681
Email: sales@nexcom.cn
www.nexcom.cn
10 Vincent Avenue,
Crownhill Business Centre,
Milton Keynes, Buckinghamshire
MK8 0AB, United Kingdom
Tel: +44-1908-267121
Fax: +44-1908-262042
Email: sales.uk@nexcom.eu
www.nexcom.eu
NEXCOM Shanghai
Asia
Taiwan
NEXCOM Intelligent Systems
Taipei Office
13F, No.920, Chung-Cheng Rd.,
ZhongHe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: +886-2-8226-7796
Fax: +886-2-8226-7792
Email: sales@nexcom.com.tw
www.nexcom.com.tw
NEXCOM Intelligent Systems
Taichung Office
16F, No.250, Sec. 2, Chongde Rd.,
Beitun Dist.,
Taichung City 406, R.O.C.
Tel: +886-4-2249-1179
Fax: +886-4-2249-1172
Email: sales@nexcom.com.tw
www.nexcom.com.tw
Japan
NEXCOM Japan
9F, Tamachi Hara Bldg.,
4-11-5, Shiba Minato-ku,
Tokyo, 108-0014, Japan
Tel: +81-3-5419-7830
Fax: +81-3-5419-7832
Email: sales@nexcom-jp.com
www.nexcom-jp.com
Room 603/604, Huiyinmingzun Plaza Bldg. 1,
No.609 Yunlin East Rd.,
Shanghai, 200333, China
Tel: +86-21-5278-5868
Fax: +86-21-3251-6358
Email: sales@nexcom.cn
www.nexcom.cn
Italy
NEXCOM ITALIA S.r.l
Via Lanino 42,
21047 Saronno (VA), Italia
Tel: +39-02-9628-0333
Fax: +39-02-9625-570
Email: nexcomitalia@nexcom.eu
www.nexcomitalia.it
NEXCOM Surveillance Technology
Room 209, Floor 2 East, No.2,
Science & Technology industrial park of
privately owned enterprises,
Xili, Nanshan Dist.,
Shenzhen, 518055, China
Tel: +86-755-8364-7768
Fax: +86-755-8364-7738
Email: steveyang@nexcom.com.tw
www.nexcom.cn
NEXCOM United System Service
Hui Yin Ming Zun Building Room 1108, Bldg.
No.11, 599 Yunling Rd., Putuo District,
Shanghai, 200062, China
Tel: +86-21-6125-8282
Fax: +86-21-6125-8281
Email: frankyang@nexcom.cn
www.nexcom.cn
Please verify specifications before quoting. This guide is intended for reference purpose only.
All product specifications and information are subject to change without notice.
No part of this publication may be reproduced in any form or by any means without prior written permission of the publisher.
All brand and product names are registered trademarks of their respective companies.
©NEXCOM International Co., Ltd. 2016
602CATA031X00
Download PDF
Similar pages