HPE OfficeConnect 1950 Switch Series data sheet

Data sheet
HPE OfficeConnect 1950
Switch Series
Key features
•10G Connectivity for fast network to servers and storage
•Combination of SFP+ and 10GBASE-T ports supports fiber and cost-effective copper
connectivity
•True stacking allows for redundancy while simplifying administration
•Customized operation using intuitive Web interface
•Limited lifetime warranty
Product overview
The HPE OfficeConnect 1950 Series is a smart Web-managed 10-Gigabit and Gigabit platform
for advanced small business networks needing the highest performance now or in the future.
The HPE OfficeConnect 1950 Switch Series includes five switches: New to the series is a 16-port
10-Gigabit aggregation switch that has 12 10GBASE-T and 4 SFP+ ports, which is ideal as the
core of a high performance workgroup or small business network. Additional series models have
Gigabit access ports with 10-Gigabit uplinks, including two standard and two PoE+ models in
24- and 48-port configurations. The access switches each have two 10GBASE-T ports supporting
copper- based Category 6A-based cabling, and two 10G SFP+ ports for fiber connectivity. The
PoE+ models both have a PoE power budget of 370 W to power up PoE/PoE+ compliant client
devices.
The HPE OfficeConnect 1950 Switch Series has an intuitive Web-based interface for simple
customization of network operation. It supports true stacking—of two aggregation switches and
separately of up to four access switches—with multiple units logically administered as a single entity,
simplifying administration while supporting greater network redundancy. Models support both
rack mounting and desktop operation. These switches have IPv4 and IPv6 operation, with Layer
2 switching as well as Layer 3 static routing. Other features include: link aggregation to boost link
performance; VLANs, Access Control Lists, and 802.1X network login for enhanced security; and
three versions of Spanning Tree Protocol (STP) for added network resiliency. HPE OfficeConnect
1950 Switch Series includes a Limited Lifetime Warranty.
Data sheet
Page 2
Features and benefits
Management
•True stacking
Simplifies administration of multiple devices. Create a single logical managed unit with up to two
HPE 1950 aggregation switches and up to four HPE 1950 access switches. Balance connections
across multiple units with standard Link Aggregation (LACP) for enhanced network resiliency.
Stack using affordable Cat 6A, or long distance fiber, or localized DAC cables. Stacked units can
be co-located or separated physically
•Intuitive Web browser-based management
Allows for easy customization of the switch—even by non-technical users
•Secure Web-management sessions with HTTPS/SSL
Encrypts and otherwise protects management sessions through HTTP Secure (HTTPS).
Prevents snooping of sensitive management information such as passwords
•SNMPv1, v2c, and v3
Facilitates remote management of the switch, as the device can be discovered and monitored
from an SNMP management station
•Complete session logging
Provides detailed information for problem identification and resolution
•Dual flash images
Provides independent primary and secondary operating system files for backup while upgrading
•Port mirroring
Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
•Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping
consistent among all clock-dependent devices within the network so that the devices can
provide diverse applications based on the consistent time
•IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Advertises and receives management information from adjacent devices on a network,
facilitating easy mapping by network management applications
•Limited Command Line Interface (CLI)
Facilitates the deployment and initial configuration of the unit. Supports troubleshooting
actions as well
•RMON
Provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
•Default DHCP client mode
Simplifies device deployment. Connect a new out-of-the-box switch to a network with a DHCP
server and the device will obtain its IP address automatically with plug-and-play operation. In the
absence of a DHCP server, the switch will fall back to a unique static address determined by the
switch’s MAC address
•Cable diagnostic tool
Used to remotely detect cable issues with cables attached to the switch
Data sheet
Page 3
Quality of service (QoS)
•Traffic prioritization
Makes it possible to prioritize important and/or time-sensitive traffic ahead of less important
traffic. Use with VoIP or video to optimize its performance on the network. Recognizes both
IEEE 802.1p and DSCP prioritization tagging. Packets are mapped to eight hardware queues
for more effective throughput
•Broadcast control
Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
•Rate limiting
Sets per-port ingress enforced maximums and per-port, per-queue minimums
•Powerful QoS feature
Supports the following congestion actions: strict priority queuing (SP), weighted round robin
(WRR) queuing, and SP+WRR
Connectivity
•Auto-MDI/MDIX
Adjusts automatically to straight-through or crossover cables on all 10/100/1000 and
10GBASE-T ports
•IEEE 802.3X flow control
Provides a configurable flow throttling mechanism propagated through the network to
prevent packet loss at a congested node
•Packet storm protection
Protects against broadcast, multicast, or unicast storms with user-defined thresholds
•Jumbo frame supports up to 10-kilobyte frames
Improves efficiency of data transfers by allowing more data into a given packet. This is especially
useful for transfers of large amounts of data. HPE 1950 Switches support up to 10-kilobyte
frame sizes
•IEEE 802.3at Power over Ethernet (PoE+)
Delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of those
devices. The HPE 1950 Series has two PoE+ enabled models. The PoE+ 802.3at standard
supports delivery of up to 30 watts of power to the attached devices, enough to support the
latest models of IP phones, Wireless Access Points, video surveillance cameras, or other PoE/PoE+
enabled devices. HPE 1950 PoE+ models support 370 W of total PoE power
•IEEE 802.3af Power over Ethernet (PoE) ready
Delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of
those devices. HPE 1950 PoE+ models are fully backward compliant with the older PoE standard
which provides up to 15.4 W of PoE power per port to attached devices
•Available redundant power for aggregation and PoE+ models
Optional Redundant Power System is available to add power redundancy and to supplement the
PoE power of the PoE+ switches. With the optional RPS, the switch will continue operating even
if the unit internal power supply fails; additionally, the PoE+ power budget can be increased to
740 Watts on 24-port PoE+ model and 800 Watts on 48-port PoE+ model
Data sheet
Page 4
•Fully IPv6 capable
––IPv6 host
Enables switches to be managed and deployed at the IPv6 network’s edge
––IPv6 routing
Supports IPv6 static routes
––MLD snooping
Forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding
––IPv6 ACL/QoS
Supports ACL and QoS for IPv6 network traffic
Security
•Access Control Lists (ACLs)
Gives granular control over what traffic goes where in the network. Allows for traffic filtering.
ACLs rules can be based on MAC-address or IP-address. ACL rules can be time-based to
implement access control during certain hours or days
•IEEE 802.1X and RADIUS network logins
Controls port-based access for authentication and accountability
•Port isolation
The port isolation feature isolates Layer 2 traffic for data privacy and security without using
VLANs. This feature can also be used to isolate the hosts in a VLAN from one another
•ARP attack protection
The ARP detection feature enables access devices to block ARP packets from unauthorized
clients to prevent user spoofing and gateway spoofing attacks
•Automatic VLAN assignment
Assigns users automatically to the appropriate VLAN based on their identity, location
and time of day
•STP BPDU port protection
Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing
forged BPDU attacks
•STP root guard
Protects the root bridge from malicious attacks or configuration mistakes
•Automatic denial-of-service protection
Protects the network by blocking malicious DoS attacks aimed at the switch itself
•Management password
Provides security so that only authorized access to the Web browser interface is allowed
Data sheet
Page 5
Performance
•Half-/full-duplex auto-negotiating capability on every port doubles the throughput of every port
•Selectable queue configurations
Allows for increased performance by selecting the number of queues and associated memory
buffering that best meet the requirements of the network applications
•IGMP/MLD Snooping
Improves network performance by filtering multicast traffic when there is no multicast receiver
on a connection. Without this, multicast traffic is flooded to all ports. IGMP snooping is used
in IPv4 networks. The IPv6 equivalent—MLD Snooping—is also supported
•10-Gigabit SFP+ based Fiber ports
Supports high-bandwidth connections over fiber. HPE 1950 Switches come with SFP+ transceiver
slots supporting 10-Gigabit fiber-based connections using optional 10G transceivers. Fiber is
particularly suited for connecting at distances beyond the 100 Meter limitation of copper-based
Cat 6A cabling. Alternatively use the SFP+ ports for redundant stacking using Direct Attached
Cables (DAC)
•10-Gigabit 10GBASE-T RJ45 ports
Supports high-bandwidth connections over Cat 6A cabling. HPE 1950 Switches come with
10GBASE-T RJ45 ports supporting 10-Gigabit copper-based connections. Cat 6A is economical
and practical for distances up to 100 Meters. Alternatively use the 10GBASE-T ports for
redundant stacking
Layer 2 switching
•VLAN support and tagging
Supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs
•STP
Supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for
faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
•BPDU filtering
Improves network efficiency by filtering unnecessary BPDU packets on a port. When STP
is enabled globally but disabled on specific ports, BPDU packets are not sent out the ports
where STP is disabled
Layer 3 services
•Address Resolution Protocol (ARP)
Determines the MAC address of another IP host in the same subnet; supports static ARPs;
gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP
operation between subnets or when subnets are separated by a Layer 2 network
•DHCP Relay
Simplifies management of DHCP addresses in networks with multiple subnets
Layer 3 routing
•Static IPv4/IPv6 routing
Provides basic routing (supporting up to 512 static routes and 32 VLAN interface on
aggregation model; 32 static routes and 8 VLAN interfaces on access models); allows manual
routing configuration
Data sheet
Page 6
Resiliency and high availability
•Link aggregation
Groups together up to 8 ports per trunk automatically using Link Aggregation Control
Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network
backbone; helps prevent traffic bottlenecks. The switches support up to 128 trunks
Convergence
•LLDP-MED (Media Endpoint Discovery)
Defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN
to automatically configure network devices such as IP phones
•Auto voice VLAN
Recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
•PoE Models For Converged Voice/Data Networks
Simplifies and lowers the cost of installing a converged infrastructure. Power IP phones, Access
Points, Video Surveillance cameras, or other PoE-enabled devices. HPE 1950 Switches support
multiple methods of allocating PoE power—IEEE 802.3af class, LLDP-MED, or user-specified—
for more efficient energy usage
Additional information
•Green initiative support
Provides support for RoHS and WEEE regulations
•Green IT and power
Improves energy efficiency through the use of the latest advances in silicon development;
shuts off unused ports and utilizes variable-speed fans, reducing energy costs
•Energy Efficient Ethernet
Compliant with IEEE 802.3az standard requirements to save energy during periods of low
data activity
Warranty and support
•Limited Lifetime Warranty
See hpe.com/officeconnect/support for warranty and support information included with
your product purchase.
Data sheet
Page 7
HPE OfficeConnect 1950 Switch Series
Specifications
HPE OfficeConnect 1950 12XGT 4SFP+
Switch (JH295A)
HPE OfficeConnect 1950 24G 2SFP+ 2XGT
Switch (JG960A)
HPE OfficeConnect 1950 48G 2SFP+ 2XGT
Switch (JG961A)
I/O ports and slots
12 RJ-45 1/10GBASE-T ports
4 SFP+ fixed 1000/10000 SFP+ ports
24 RJ45 auto-negotiating 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab
Type 1000BASE-T)
48 RJ45 auto-negotiating 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab
Type 1000BASE-T)
2 SFP+ fixed 1000/10000 SFP+ ports
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ45 1/10GBASE-T ports
2 RJ45 1/10GBASE-T ports
1 dual-personality (RJ-45 or Mini USB)
console port to access limited CLI port
1 RJ-45 out-of-band management port
1 RJ45 console port to access limited CLI
1 RJ45 console port to access limited CLI
17.32(w) x 6.3(d) x 1.73(h) in
(44 x 16 x 4.4 cm) (1U height)
8.07 lb (3.66 kg)
17.17(w) x 6.3(d) x 1.73(h) in.
(43.6 x 16 x 4.4 cm) (1U height)
6.61 lb (3 kg)
17.32(w) x 10.63(d) x 1.73(h) in.
(44 x 27 x 4.4 cm) (1U height)
11.02 lb (5 kg)
Memory and processor
Cortex-A9 @ 1.25 MHz, 512 MB flash;
Packet buffer size: 2 MB, 1 GB SDRAM
Cortex-A9 @ 1 GHz, 128 MB flash;
packet buffer size: 1.5 MB, 1 GB SDRAM
Cortex-A9 @ 1 GHz, 128 MB flash;
packet buffer size: 3 MB, 1 GB SDRAM
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack
or equipment cabinet (hardware included)
Mounts in an EIA standard 19-inch telco rack
or equipment cabinet (hardware included)
Mounts in an EIA standard 19-inch telco rack
or equipment cabinet (hardware included)
Performance
100 Mb Latency
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching capacity
Routing table size
MAC address table size
< 5 µs
< 5 µs
< 1.5 µs
Up to 238 Mpps (64-byte packets)
320 Gbps
512 entries (IPv4), 256 entries (IPv6)
16384 entries
< 5 µs
< 5 µs
< 1.5 µs
Up to 95.2 Mpps (64-byte packets)
128 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
< 5 µs
< 5 µs
< 1.5 µs
Up to 130.9 Mpps (64-byte packets)
176 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
Reliability
MTBF (years)
81.8
87.2
51
Additional ports and slots
Physical characteristics
Dimensions
Weight
Data sheet
Specifications
Page 8
HPE OfficeConnect 1950 12XGT 4SFP+
Switch (JH295A)
HPE OfficeConnect 1950 24G 2SFP+ 2XGT
Switch (JG960A)
HPE OfficeConnect 1950 48G 2SFP+ 2XGT
Switch (JG961A)
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
5% to 95%, noncondensing
5% to 95%, noncondensing
Up to 16,404 ft (5 km)
ISO 7779
Up to 16,404 ft (5 km)
Low-speed fan: 19.0 dB, High-speed fan:
44.5 dB; ISO 7779 Dual speed fan
Up to 16,404 ft (5 km)
Low-speed fan: 38.4 dB, High-speed fan:
47.0 dB; ISO 7779 Dual speed fan
50/60 Hz
100–240 VAC
50/60 Hz
100–240 VAC
50/60 Hz
100–240 VAC
Maximum power rating
75 W
Notes:
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning
the infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
34 W
Notes:
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning
the infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
54 W
Notes:
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning
the infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
Safety
UL 60950; IEC 60950-1; EN 60950-1;
GB 4943.1
UL 60950; IEC 60950-1; EN 60950-1;
GB 4943.1
UL 60950; IEC 60950-1; EN 60950-1;
GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A;
EN 55022 Class A; CISPR 22 Class A;
EN 55024; EN 61000-3-2 2000, 61000-3-3;
ICES-003 Class A
FCC part 15 Class A; VCCI Class A;
EN 55022 Class A; CISPR 22 Class A;
EN 55024; EN 61000-3-2 2000, 61000-3-3;
ICES-003 Class A
FCC part 15 Class A; VCCI Class A;
EN 55022 Class A; CISPR 22 Class A;
EN 55024; EN 61000-3-2 2000, 61000-3-3;
ICES-003 Class A
Management
IMC—Intelligent Management Center; Limited
command-line interface; Web browser; SNMP
manager; HTTPS; RMON1; FTP; Supported
by HPE IMC and generic SNMP management
platforms. Refer to documentation for MIB
support details.
IMC—Intelligent Management Center; Limited
command-line interface; Web browser; SNMP
manager; HTTPS; RMON1; FTP; Supported
by HPE IMC and generic SNMP management
platforms. Refer to documentation for MIB
support details.
IMC—Intelligent Management Center; Limited
command-line interface; Web browser; SNMP
manager; HTTPS; RMON1; FTP; Supported
by HPE IMC and generic SNMP management
platforms. Refer to documentation for MIB
support details.
Notes
Transceivers under accessories are
recommended versions. Here is the list of fully
supported transceivers. 10G SFP+: JD092B,
JD093B, JD094B, JG234A, J9150A, J9151A,
J9152A, J9153A. GE SFP: JD118B, JD119B,
JD089B, J4858C, J4859C, J8177C.
Transceivers under accessories are
recommended versions. Here is the list of fully
supported transceivers. 10G SFP+: JD092B,
JD093B, JD094B, JG234A, J9150A, J9151A,
J9153A. GE SFP: JD118B, JD119B, JD089B,
J4858C, J4859C, J8177C.
Transceivers under accessories are recommended
versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B,
JD094B, JG234A, J9150A, J9151A, J9153A.
GE SFP: JD118B, JD119B, JD089B, J4858C,
J4859C, J8177C.
Services
Refer to the Hewlett Packard Enterprise
website at hpe.com/networking/services for
details on the service-level descriptions and
product numbers. For details about services
and response times in your area, please
contact your local Hewlett Packard Enterprise
sales office.
Refer to the Hewlett Packard Enterprise
website at hpe.com/networking/services
for details on the service-level descriptions and
product numbers. For details about services,
and response times in your area, please
contact your local Hewlett Packard Enterprise
sales office.
Refer to the Hewlett Packard Enterprise
website at hpe.com/networking/services for
details on the service-level descriptions and
product numbers. For details about services,
and response times in your area, please
contact your local Hewlett Packard Enterprise
sales office.
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage
temperature
Nonoperating/Storage relative
humidity
Altitude
Acoustic
Electrical characteristics
Frequency
AC voltage
Data sheet
Page 9
HPE OfficeConnect 1950 Switch Series
Specifications
HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+ (370W)
Switch (JG962A)
HPE OfficeConnect 1950 48G 2SFP+ 2XGT PoE+ (370W)
Switch (JG963A)
I/O ports and slots
24 RJ45 auto-negotiating 10/100/1000 PoE+ ports
(IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T,
IEEE 802.3af PoE, IEEE 802.3at)
48 RJ45 auto-negotiating 10/100/1000 PoE+ ports
(IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T,
IEEE 802.3af PoE, IEEE 802.3at)
2 SFP+ fixed 1000/10000 SFP+ ports
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ45 1/10GBASE-T ports
2 RJ45 1/10GBASE-T ports
1 RJ45 console port to access limited CLI
1 RJ45 console port to access limited CLI
17.32(w) x 14.17(d) x 1.73(h) in. (44 x 36 x 4.4 cm)
(1U height)
13.23 lb (6 kg)
17.32(w) x 16.54(d) x 1.73(h) in. (44 x 42 x 4.4 cm)
(1U height)
15.43 lb (7 kg)
Memory and processor
Cortex-A9 @ 1 GHz, 128 MB flash;
Packet buffer size: 1.5 MB, 1 GB SDRAM
Cortex-A9 @ 1 GHz, 128 MB flash;
Packet buffer size: 3 MB, 1 GB SDRAM
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack or equipment
cabinet (hardware included)
Mounts in an EIA standard 19-inch telco rack or equipment
cabinet (hardware included)
Performance
100 Mb Latency
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching capacity
Routing table size
MAC address table size
< 5 µs
< 5 µs
< 1.5 µs
Up to 95.2 Mpps (64-byte packets)
128 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
< 5 µs
< 5 µs
< 1.5 µs
Up to 130.9 Mpps (64-byte packets)
176 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
Reliability
MTBF (years)
44.4
26.8
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
Up to 16,404 ft (5 km)
Low-speed fan: 37.3 dB, High-speed fan: 47.1 dB;
ISO 7779 Dual speed fan
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
Up to 16,404 ft (5 km)
Low-speed fan: 47.3 dB, High-speed fan: 50.0 dB;
ISO 7779 Dual speed fan
Additional ports and slots
Physical characteristics
Dimensions
Weight
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
Data sheet
Specifications
Page 10
HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+ (370W)
Switch (JG962A)
HPE OfficeConnect 1950 48G 2SFP+ 2XGT PoE+ (370W)
Switch (JG963A)
50/60 Hz
100–240 VAC
50/60 Hz
100–240 VAC
Maximum power rating
PoE power
425 W
370 W PoE+
Notes:
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers
provided for planning the infrastructure with fully loaded
PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated.
PoE power is the power supplied by the internal power
supply. It is dependent on the type and quantity of power
supplies and may be supplemented with the use of an
external power supply (EPS).
When supplemented with the use of an HPE RPS1600
Redundant Power System, up to 740 W of PoE+ can be
supplied. Unit max. power consumption with RPS is 770 W.
470 W
370 W PoE+
Notes:
Maximum power rating and maximum heat dissipation are
the worst-case theoretical maximum numbers provided
for planning the infrastructure with fully loaded PoE
(if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power
supply. It is dependent on the type and quantity of power
supplies and may be supplemented with the use of an
external power supply (EPS).
When supplemented with the use of an HPE RPS1600
Redundant Power System, up to 800 W of PoE+ can be
supplied. Unit max. power consumption with RPS is 910 W.
Safety
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
Management
IMC—Intelligent Management Center; Limited
command-line interface; Web browser; SNMP manager;
HTTPS; RMON1; FTP; Supported by HPE IMC and
generic SNMP management platforms. Refer to
documentation for MIB support details.
IMC—Intelligent Management Center; Limited
command-line interface; Web browser; SNMP manager;
HTTPS; RMON1; FTP; Supported by HPE IMC and generic
SNMP management platforms. Refer to documentation for
MIB support details.
Notes
Transceivers under accessories are recommended
versions. Here is the list of fully supported transceivers. 10 G
SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A,
J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C,
J4859C, J8177C.
Transceivers under accessories are recommended versions.
Here is the list of fully supported transceivers. 10 G SFP+:
JD092B, JD093B, JD094B, JG234A, J9150A, J9151A,
J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C,
J4859C, J8177C.
Services
Refer to the Hewlett Packard Enterprise website at
hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services,
and response times in your area, please contact your local
Hewlett Packard Enterprise sales office.
Refer to the Hewlett Packard Enterprise website at
hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services,
and response times in your area, please contact your local
Hewlett Packard Enterprise sales office.
Electrical characteristics
Frequency
Voltage
Data sheet
Page 11
Standards and Protocols
(applies to all products in series)
IP Multicast Snooping
RFC 1112 IGMPv1
RFC 3376 IGMPv3
Device management
RFC 1157 SNMPv1/v2c
RFC 1305 NTPv3
RFC 2573 (SNMPv3 Applications)
RFC 2819 (RMON groups Alarm, Event,
History, and Statistics only)
RFC 3416 (SNMP Protocol Operations v2)
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ac VLAN Tagging Extension
IEEE 802.3ad Link Aggregation Control
Protocol (LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at PoE+
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 894 IP over Ethernet
RFC 950 Internet Standard Subnetting
Procedure
RFC 951 BOOTP
RFC 1027 Proxy ARP
RFC 1042 IP Datagrams
RFC 1071 Computing the Internet Checksum
RFC 1123 Requirements for Internet Hosts
RFC 1213 Management Information
Base for Network Management of TCP/
IP-based Internet
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1533 DHCP Options and BOOTP
Vendor Extensions
RFC 1812 IPv4 Routing
RFC 1866 Hypertext Markup
Language—2.0
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2462 IPv6 Stateless Address
Auto-configuration
RFC 2616 HTTP Compatibility v1.1
RFC 2665 Definitions of Managed Objects
for the Ethernet-like Interface Types
RFC 2668 Definitions of Managed
Objects for IEEE 802.3 Medium
Attachment Units (MAUs)
RFC 3414 User-based Security Model
(USM) for version 3 of the Simple Network
Management Protocol (SNMPv3)
RFC 3415 View-based Access Control
Model (VACM) for the Simple Network
Management Protocol (SNMP)
RFC 3418 Management Information
Base (MIB) for the Simple Network
Management Protocol (SNMP)
RFC 3587 IPv6 Global Unicast Address
Format
RFC 4541 Considerations for Internet
Group Management Protocol (IGMP)
and Multicast Listener Discovery (MLD)
Snooping Switches
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2463 ICMPv6
RFC 2464 Transmission of IPv6 over
Ethernet Networks
RFC 3162 RADIUS and IPv6
RFC 3315 DHCPv6 (client and relay)
RFC 3484 Default Address Selection for
IPv6
RFC 3736 Stateless Dynamic Host
Configuration Protocol (DHCP) Service
for IPv6
RFC 4291 IP version 6 Addressing
Architecture
RFC 4293 MIB for IP
RFC 4443 ICMPv6
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address
Auto-configuration
MIBs
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1757 Remote Network Monitoring
RFC 2021 RMONv2 MIB
RFC 2096 IP Forwarding Table MIB
RFC 2233 Interface MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2574 SNMP USM MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q
Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB
Network management
IEEE 802.1AB Link Layer Discovery
Protocol (LLDP)
RFC 2819 (RMON groups Alarm, Event,
History, and Statistics only)
RFC 1215 SNMP Generic traps
ANSI/TIA-1057 LLDP Media Endpoint
Discovery (LLDP-MED)
IEEE 802.1X Port Based Network
Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2139 RADIUS Accounting
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Security
Data sheet
HPE OfficeConnect 1950 Switch Series accessories
Transceivers
HPE X121 1G SFP LC SX Transceiver (J4858C)
HPE X121 1G SFP LC LX Transceiver (J4859C)
HPE X121 1G SFP RJ45 T Transceiver (J8177C)
HPE X132 10G SFP+ LC SR Transceiver (J9150A)
HPE X132 10G SFP+ LC LR Transceiver (J9151A)
Cables
HPE 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)
HPE 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)
HPE 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)
HPE 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)
HPE 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)
HPE 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)
HPE 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1 m Cable (QK732A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2 m Cable (QK733A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5 m Cable (QK734A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15 m Cable (QK735A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30 m Cable (QK736A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50 m Cable (QK737A)
HPE OfficeConnect 1950 12XGT 4SFP+ Switch
(JH295A)
HPE RPS800 Redundant Power Supply (JD183A)
HPE X290 500/800 1m RPS Cable (JD190A)
HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+
(370W) Switch (JH962A)
HPE OfficeConnect 1950 48G 2SFP+ 2XGT PoE+
(370W) Switch (JH963A)
HPE RPS1600 Redundant Power System (JG136A)
HPE RPS1600 1600W AC Power Supply (JG137A)
HPE X290 1000 A JD5 2m RPS Cable (JD187A)
Learn more at
hpe.com/networking
Make the right purchase
decision. Click here to
chat with our presales
specialists.
Sign up for updates
© Copyright 2015–2017 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without
notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
4AA5-6730ENW, September 2017, Rev. 6
Download PDF
Similar pages