Pioneer Professional Plasma PDP-42MXE10

High Contrasts
Bright Whites
Deep Blacks
Vivid Colours
Crystal Clear Images
PDP-42MXE10
42 Inch XGA Professional Plasma Display
www.pioneer-eur.com
TECHNOLOGY
FUNCTIONS
FEATURES
CONTROL
VIDEO WALL
EXPANSION SOLUTIONS
SPECIFICATIONS
TECHNOLOGY
FUNCTIONS
FEATURES
CONTROL
VIDEO WALL
EXPANSION SOLUTIONS
SPECIFICATIONS
T e c h n o l o g y
Pure Black Panel
Front Glass Substrate
Achieves the dual goals of
higher brightness and
greater contrast
PDP image quality takes another impressive
step forward with Pioneer s new Pure Black
Panel. In addition to our exclusive Deep Encased
Cell Structure, it uses another breakthrough
technology called Crystal Emissive Layer to
achieve luminous efficiency that is much higher
than previous models. The result is
unprecedented high brightness of 1,400cd/m2
and a contrast ratio of 3,000:1. Blacks are blacker,
yet the lighter areas on the screen still maintain
their true brightness values; assets that ensure
that the PDP-42MXE10 provides an eye—catching
display solution with an exceptional level of
performance.
Cell Structure
Dialectric Layer
Transparent Electrode
Protective Layer
Crystal Emissive Layer
Black Stripe
Auxillary Electrode
Green Phosphor
Blue Phosphor
Red Phosphor
Deep Waffle Rib Structure
Address Protective Layer
Address Electrode
Rear Glass Substrate
Crystal Emissive Layer
Front Glass Substrate
Protective Layer
Plasma Discharge
Ultraviolet Rays
Deep Waffle Rib
Rear Glass Substrate
New Pure Drive Pro
Superior
scaling
performance
i-CLEAR Drive
Superb picture quality designed for professional
applications
High efficiency and the best possible picture
quality has been achieved by integrating colour
management, scaling, GUI mix and other image
processing technologies on a single chip that
we developed exclusively for our professional
monitors. Image processing is further enhanced
by i-Clear Drive: depending on the video signal
it intelligently adjusts grey steps in darker areas
to sharpen details. Since it does not omit any
data when scaling, even with highly detailed
signals, image processing is smoother and more
precise. False contour noise is also completely
eliminated.
PDP-42MXE10
Even when the image
is expanded by video
wall or point zoom
functions, the
PDP-42MXE10 displays
detailed information
with exceptional purity.
Conventional PDP
Grey Levels
Conventional PDP
PDP-42MXE10
TECHNOLOGY
FUNCTIONS
FEATURES
CONTROL
VIDEO WALL
EXPANSION SOLUTIONS
SPECIFICATIONS
F u n c t i o n s
Intelligent and flexible display
options
The new Pure Drive Pro image processing engine greatly improves
performance. This enables a wide range of new dual-image
options (without the need for external processing) to be
offered as standard specifications. The versatile features
enhance digital signage applications, improve
presentation capabilities and support innovative
promotions. All Picture in Picture options
and Side by Side modes can be
managed by the remote control
unit (RCU).
Upgraded side by side mode
In the full-screen mode, three display options are available; as
well as a 50:50 split that s ideal for video conferencing, a 4x3
image can be selected which is tailor made for digital signage
applications. This mode can be switched so that the smallest
portion of the image is either on the left or right of the display.
It s also possible to present the images in a portrait* format
to enhance installation options.
*External manipulation of the signal is needed
Banner mode
The display s versatility is further advanced
by the banner mode, which allows text
to be easily overlaid onto the screen. The
banner — a 25% strip of the screen can
be stationed at four positions (top,
top-middle, middle-bottom and bottom)
and its transparency adjusted between
0-80%. The feature provides a simple
yet cost efficient and highly effective
digital signage application; with one input
connected to a PC, any standard offthe-shelf software can be used to
author the banner content.
Welcome to All
Welcome to All
Welcome to All
Sub-image detection
Intelligent Dual Screen Modes
Thanks to Pure Drive Pro s processing power, images in dual
screen mode are delivered with identical pin-sharp accuracy,
Welcome to All
ideal for video conferencing. Any two of the many inputs can
be displayed together, either as two identically sized images
Picture and Picture or as a larger main image next to a smaller
sub image Picture out Picture . Main and sub images can be
also be swapped over to switch the audio source.
the main screen in the form of a small window. The sub
image can be set to one of four sizes and the transparency
of the window can be changed between 0 and 80%.
In addition a Picture in Picture mode is available where the
sub image can be displayed in any one of four corners of
Select four sub-image sizes and
the visual mode.
Sub-image detection is an engaging feature. It enables a subimage to be presented in any corner of the display. When the
sub-input is turned off, the PIP image disappears and when
it s turned back on, it returns to the screen. This intelligent
application is ideal to display time sensitive content, highlight
a new promotion or intermittently show a company logo or
snapshot of information.
TECHNOLOGY
FUNCTIONS
FEATURES
CONTROL
VIDEO WALL
EXPANSION SOLUTIONS
F e a t u r e s
Seamless Orbiter alleviates burn-in
Conventional orbiter modes reduce ghosting by moving the displayed image by one pixel or more at regular intervals. Because viewers
can notice the movement, it interferes with their viewing. The PDP-42MXE10 includes a unique Seamless Orbiter function that moves
the entire image in extremely small steps of less than a pixel. The most effective orbiting pattern was adopted based on a variety of
simulations, achieving the maximum possible mitigation of ghosting without viewers noticing the process.
Conventional Orbiter Mode
The entire image moves one or more pixels at
a time, easily noticeable in meetings.
Conventional PDP
Seamless Orbiter Mode
The entire image moves in extremely small steps undetectable to the human eye. Three types of processing can be selected
to tailor the display s performance to the type of application and input — for example whether the content is primarily still or
video images.
PDP-42MXE10
Various display modes to alleviate
burn-in
Low power consumption and four
energy saver modes
Side mask brightness adjustment: Adjusts side mask
brightness during 4:3 image display.
Due to the efficiency of the Pure Black Panel, the
PDP-42MXE10 s power consumption of 285W is the lowest
in the industry.
White signal display: Displays white over the entire
screen. This restores ghosted locations to their former
condition.
Inverse mode: Reverses the image and full mask that
turns the entire screen into a single colour.
Soft focus: Blurs the edges of the image, making
ghosting difficult to see.
Efficiency is further enhanced by the addition of energy
saver modes, which manage the peak intensity of high
brightness images. An automatic mode is featured which
uses an ambient light sensor to set the optimum mode for
the local lighting conditions.
Image adjustment Pro modes
Other Features
Under-Scan: Displays the complete video signal so that
all broadcast information can be viewed.
Two different sizes of multi-lingual GUI.
Colour-Off: Reduces colour noise for monochrome video.
Display Call.
Image processing: Enables users to select from two
modes designed to enhance the display of static images
or video based content.
Portrait mode GUI.
Point Zoom.
Intelligent Auto Set-up.
Colour Detail Adjustment.
Pure image: Displays input images without image
processing except I/P conversion.
Priority Input Mode.
High contrast mode: Uses special dynamic range
expansion to make images more vivid.
Remote Controller ID.
Layered Key Lock / Memory Lock.
SPECIFICATIONS
TECHNOLOGY
FUNCTIONS
FEATURES
CONTROL
VIDEO WALL
EXPANSION SOLUTIONS
SPECIFICATIONS
C o n t r o l
High speed image
switching for smooth
presentations and
displays
The PDP-42MXE10 has a high performance dual image processing
function that switches from one input image to another at the
high speed of approx. 0.4 seconds. This ensures smooth,
comfortable viewing of presentations in offices and displays at
exhibition halls or event venues.
0.4
Seconds
<--->
Input 1
Dual Image PiP
Freeze
A PiP-freeze function is available
to temporarily freeze a displayed
image. The image can be
grabbed via an RCU command
to accentuate a part of a
presentation or capture broadcast
content. The picture can be
displayed in PiP format or side
by side mode.
Input 2
RS-232C status feedback
Programmable Timer
When a command is transmitted from a control device to
the PDP via the RS-232C interface, the PDP returns its status.
This not only permits remote confirmation of current PDP
status, but it can also specify the cause of errors (should
they occur) to enhance service response. The PDP-42MXE10
provides high control capacity: combination connections,
variable baud rate setting, acknowledge function and more.
You can take advantage of a convenient weekly timer and
seven programmable functions including power on/off, input
selection, and activation of image burn-in prevention modes.
Serial number Info
Product model Info
Hour meter
Inside temperature Info
Power on/off Info
Input signal Info
Cause of error
TECHNOLOGY
V i d e o
FUNCTIONS
FEATURES
CONTROL
VIDEO WALL
EXPANSION SOLUTIONS
SPECIFICATIONS
W a l l
Video Wall
can display
up to 25
PDPs
Pioneer makes it easy to configure
multi-monitor video walls. Possible
configurations are 2x2, 3x3, 4x4
and 5x5. Two display modes have
been designed to enhance Video
Walls, Normal and Adjusted. In
Normal Mode static information
can be displayed without losing
text within the bezel areas. It splits
the image into four parts without
losing any of the data that would
normally be obscured by the PDP
frame. Adjusted Mode divides the
picture into four sections keeping
the overall image complete as
though looking through a window,
ideal for displaying moving images.
Video Wall functions include Power
On Delay, ABL Link, Auto ID Setting
and Repeat Timer.
Power On Delay
ABL Link
Repeat Timer
This function automatically staggers the
powering up of each display to reduce the
load on the power source.
The ABL (Auto Brightness Limiter) Link function commands the video wall
as if it were one display setting the brightness of each screen at a uniform
level (operates only with 2x2 and 3x3 configurations).
Repeat Timer allows the switching between of two different
inputs signals for an adjustable amount of time. The user
can display an input signal for a period of time and then
switch to another input signal for a different amount of
time before the sequence is repeated. In addition to
controlling the time of this function, the user can control
the Normal and Adjusted modes of each signal, and the
number of divided images. The second input signal does
not need to come from same source, multiple devices can
be used as long as they all share a common Input address.
Auto ID Setting
With ABL
Automatically sets an ID for each display
connected via a combination control cable
to permit simpler error-free setting
(operates only with 2x2 and 3x3
configurations).
Without ABL
INPUT 1 - 2mins
INPUT 2 Adjusted Mode - 3mins
INPUT 1 - 2mins
INPUT 2 Normal Mode - 3mins
INPUT 1 - 2mins
Variable INPUT 2 Adjusted Mode - 3mins
It is not necessary to program each PDP separately as they
are all controlled from the master PDP. (Display ID-1).
TECHNOLOGY
FUNCTIONS
E x p a n s i o n
FEATURES
CONTROL
VIDEO WALL
EXPANSION SOLUTIONS
SPECIFICATIONS
S o l u t i o n s
Pioneer Plasma
Displays
provide
unparalleled
connectivity
In addition to the standard 15 Pin D-sub
and DVI-D connector*, the displays include
two open architecture expansion slots.
One slot is dedicated to signal input, with
two optional Pioneer expansion cards
available to handle all the major video
signals. The second is a unique
communications slot that includes an
RS-232C expansion card as standard. With
their open architecture, these slots enable
interchangeable cards to be designed by
third party developers to handle all current
and future analogue, digital and
communications signals. They also provide
the flexibility for systems integrators to
design plasma installations to customers
exact specifications.
PDA-5003
PDA-5004
* The standard connectors are only compatible
with video signals when a video card is installed
(PDA-5003/ PDA-5004)
PDA-5003 Video Input/Output Terminals
Input 3
IN
Connector
Mini DIN 4 Pin
S T erminal
Input 4
IN
OUT
IN
BNC
BNC
BNC x 5
Input 5
Signal
Y/C Separate video signal
Composite video signal
Composite video signal
Analogue RGB Signal
Compatible with G on Sync)
Component Video Signal
Level/Impedance
Y: 1Vp-p/75½
C: 0.286Vp-p/75½ (NTSC)
C: 0.3Vp-p/75½ (PAL)
1Vp-p/75½
75½
RGB: 0.7Vp-p/75½
G on Sync: 1Vp-p/75½
HD/CS,VD: TTL/75½ or 2.2k½ switchable
Y: 1Vp-p/75½
Pb/Cb, Pr/Cr: 0.525Vp-p/75½
(3.58/4.43 NTSC, PAL, PAL-M, PAL-N, SECAM)
PDA-5003 Audio Input/Output Terminals
Audio Input (Input 3/4)
Audio Input (Input 5)
Connector
RCA pin x 2
RCA pin x 2
Level/Impedance
L/R: 500mVrms / more than 10k½
L/R: 500mVrms / more than 10k½
PDA-5004 Video Input/Output Terminals
Input 3
IN
Connector
Mini DIN 4Pin
S terminal
Signal
Y/C Separate video signal
Input 4
IN
OUT
IN
RCA
RCA
RCAx3
Composite video signal
Composite video signal
Component video signal
Input 5
Level/Impedance
Y: 1Vp-p/75½
C: 0.286Vp-p/75½ (NTSC)
C: 0.3Vp-p/75½ (PAL)
1Vp-p/75½
75½
Y: 1Vp-p/75½
Pb/Cb,
Pr/Cr: 0.525Vp-p/75½
(3.58/4.43 NTSC, PAL, PAL-M, PAL-N, SECAM)
PDA-5004 Audio Input/Output Terminals
Audio Input (Input 3)
Audio Input (Input 4)
Audio Input (Input 5)
Connector
RCA pin x 2
RCA pin x 2
RCA pin x 2
Level/Impedance
L/R: 500mVrms/more than 10k½
L/R: 500mVrms/more than 10k½
L/R: 500mVrms/more than 10k½
TECHNOLOGY
FUNCTIONS
P D P - 4 2 M X E 1 0
FEATURES
CONTROL
EXPANSION SOLUTIONS
Analogue and Digital PC Signal Support
Resolution
HxV
640 x 400
720 x 400
IBM PC/AT
Compatible
Computers
640 x 480
610 mm
848 x 480
852 x 480
800 x 600
1024 x 768
1022 mm
98 mm
1152 x 864
1280 x 768
General Specifications
921.6 x 515.3 mm
16:9
1024 x 768
0.9 x 0.671 mm
1400cd/m2 (peak / panel)
3000:1
4096
1022 x 610 x 98 mm
30.5 Kg
285 W
AC 100 ~ 240V±10% 50/60Hz
D-sub Pin baud rate:1200, 2400, 4800, 9600, 19200, 38400 bps
Mini DIN Pin (x2)
L/R impedance 8 ~ 16½/8W +8W(6½)
0ûC ~ 40ûC
20% ~ 80%
760 ~ 1100hPa
SPECIFICATIONS
S p e c i f i c a t i o n s
Dimensions
Effective screen size (H x V)
Aspect ratio
Number of pixels (H x V)
Pixel pitch (H-RGB trio x V)
Brightness
Contrast
Grey scale
External dimensions (W x H x D)
Weight
Power consumption
Power supply
RS-232C
Combination IN/OUT
Speaker Out
Operational temperature
Operational humidity
Operational pressure
VIDEO WALL
1280 x 800
1280 x 854
1280 x 960
Vf
(Hz)
70.1
70.1
85.1
59.9
72.8
75
85
100.4
120.4
60
60
56.3
60.3
72.2
75
85.1
99.8
120
60
70.1
75
85
100.6
119.4
60
72
75
56.2
59.8
69.8
60
60
60
Hf
(kHz)
31.5
31.5
37.9
31.5
37.9
37.5
43.3
51.1
61.3
31
31.7
35.2
37.9
48.1
46.9
53.7
63
75.7
48.4
56.5
60
68.7
80.5
95.5
53.7
64.9
67.5
45.1
48
56
49.7
53.1
60
Resolution
HxV
IBM PC/AT
1280 x 960
Compatible
1360 x 765
Computers (cont) 1360 x 768
1376 x 768
1280 x 1024
Vf
(Hz)
85
60
60
59.9
60
75
85
100.1
1400 x 1050
60
75
85
1680 x 1050
60
1600 x 1200
60
65
70
75
85
1920 x 1200
60
1920 x 1200RB 60
Apple Macintosh¨ 640 x 480
66.7
832 x 624
74.6
1024 x 768
74.9
1152 x 870
75.1
1440 x 900
60
EWS Series
Work Station
60
1280 x 1024
71.2
1280 x 1024
72
1152 x 900
66
1152 x 900
76
1280 x 1024
76.1
1024 x 768
60
1280 x 1024
60
Analogue Video Signal Support
Hf
(kHz)
85.9
47.7
47.7
48.3
64
80
91.1
108.5
65.3
82.3
93.9
65.3
75
81.3
87.5
93.8
106.3
74.6
74
35
49.7
60.2
68.7
56
64.6
75.1
78.1
61.8
71.7
81.1
49.7
63.9
Signal INPUT / OUTPUT Terminals
Input 1
Input 2
IN
OUT
IN
Terminal
Mini D-sub 15Pin
Mini D-sub 15Pin
DVI-D 24 Pin
Signal
Analog RGB
(Sync on G)
Signal Level / Impedance
RGB: 0.7Vp-p / 75½
Sync on G : 1Vp-p / 75½
HD/CS,VD: TTL / 2.2k½
Component Signal*
Y: 1Vp-p/75½
Pb/Cb, Pr/Cr: 0.525Vp-p/75½(75½)
Microsoft Plug & Play (VESA DDC 1/2B)
Analog RGB (Sync on G)
75½ Output
Digital RGB (DVI 1.0 , w/ HDCP*)
Microsoft Plug & Play (VESA DDC 2B)
Vertical
Fv(Hz)
50
60
Horizontal
Fh(kHz)
15.6
31.4
37.5
28.1
56.3
62.5
15.8
31.5
45
33.8
67.5
Signal format
(Component/RGB)
576i/SDTV
576p/SDTV
720p/HDTV
1080i/HDTV
1080p/HDTV
1250p/HDTV
480i/SDTV
480p/SDTV
720p/HDTV
1080i/HDTV, 1035i/HDTV
1080p/HDTV
Only with video card installed.
Digital video Signal Support (w/ HDCP)
Fv
50
Fh
15.6
31.4
37.5
28.1
56.3
62.5
60
15.8
31.5
45.0
33.8
67.5
EIA/CEA-861 (w/ HDCP)
Fv
Fh
50
15.6
31.3
37.5
28.1
56.3
60
31.5
15.8
31.5
45.0
33.8
67.5
Signal Format
576i/SDTV
576p/SDTV
720p/HDTV
1080i/HDTV
1080p/HDTV
1250p/HDTV
480i/SDTV
480p/SDTV
720p/HDTV
1080i/HDTV, 1035i/HDTV
1080p/HDTV
Signal Format
720 (1440) x 576i
720 x 576P
1280 x 720P
1920 x 1080i
1920 x 1080P
640 x 480P
720 (1440) x 480i
720 x 480P
1280 x 720P
1920 x 1080i
1920 x 1080P
Only with video card installed.
For Optional Accessories please visit
www.pioneer-eur.com
Plasma Business Division
Slough SL2 4QP, UK
TEL +44 (0) 1753 789789
FAX +44 (0) 1753 789880
www.pioneer-eur.com
All product names and company names are registered trademarks of their
respective owners. Published by Pioneer Europe N.V Multimedia Division.
Copyright 2005 by Pioneer Europe N.V All rights reserved.
Plasma Display Panels are high technology devices and are manufactured
to the highest quality possible within current technology. There may however
be a minute number of inactive always lit dots of red, green or blue visible
on screen within the specification of the products. This does not indicate a
malfunction. This equipment is sold on the condition that it will be installed
by a competent professional engineer with sufficient training and skill to
carry out proper installation. Be sure to entrust the installation and set-up
of this machine only to a competent professional or retail service engineer.
Pioneer cannot accept liability in cases where the equipment is damaged
due to inappropriate installation location, improper assembly, installation,
set-up, operation, renovation, or by natural disasters.
Features and specifications of the products described or illustrated in this
catalogue are correct at the time of printing but could change as production
changes might occur. This catalogue may contain typographical errors and
the colours of the depicted products may deviate slightly from reality.
Consult your Pioneer dealer to ensure that actual features and specifications
match your requirements.
This catalogue may contain references to products that may or will not be
available in your country.
Your Local Pioneer Dealer
42MXE-8PP-EN
Pioneer Europe N.V
Designed by Planet Interactive Arts Ltd | www.planet-ia.co.uk
* Only with video card installed.
Download PDF
Similar pages