Cisco 4-Port, 8-Port, and 8-Port with PoE/PoE+ Gigabit Ethernet LAN

Data Sheet
Cisco 4-Port, 8-Port, and 8-Port with PoE/PoE+
Gigabit Ethernet LAN Switch Network Interface
Modules
Product Overview
The 4- and 8-port Cisco® Gigabit Ethernet LAN Switch Network Interface Modules (NIMs) can reduce your
company's total cost of ownership (TCO) by integrating Gigabit Ethernet switch ports within Cisco 4000 Series
Integrated Services Routers (ISRs). These low-density Gigabit Ethernet switches offer small to medium-sized
businesses and enterprise branch offices a combination of switching and routing integrated into a single device
(Figure 1).
Integration of these switches with Cisco IOS-XE Software allows network administrators to manage a single device
using Cisco management tools or the router command-line interface (CLI) for LAN and WAN management needs.
This approach reduces network complexity, lowers maintenance contract costs, and lessens staff training needs. It
also simplifies software qualification efforts and delivers a consistent user experience at branch offices.
Additionally, these low-density Gigabit Ethernet switching modules enable Cisco's industry-leading power
initiatives, including per-port Power over Ethernet (PoE) and Power over Ethernet Plus (PoE+) power monitoring,
which enhances the ability of the branch office to scale to higher performance requirements and still meet
environmental initiatives for IT teams to operate a power-efficient network.
The 4- and 8-port Gigabit Ethernet LAN Switch NIMs provide line-rate Layer 2 switching across onboard Gigabit
Ethernet ports. The 4-port NIM has four 10/100/1000 switched Gigabit Ethernet ports. The 8-port NIM has eight
10/100/1000 switched Gigabit Ethernet ports, with a PoE/PoE+ version capable of powering all eight ports. The
NIMs furthermore enable direct module-to-module communication through the use of the multigigabit fabric (MGF).
The new features for the Gigabit Ethernet LAN Switch NIMs include four quality-of-service (QoS) queues per port,
Shaped Deficit Weighted Round Robin (SDWRR), dynamic secure port, intra chassis cascading, up to 30W of
PoE/PoE+ per port, and PoE per-port monitoring and policing.
Figure 1.
4-Port, 8-Port, and 8-Port PoE/PoE+ Cisco Gigabit Ethernet LAN Switch Network Interface Modules
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 11
Secure Network Connectivity for Data, Voice, and Video
When inserted in a Cisco 4000 Series ISR, the Gigabit Ethernet LAN Switch NIMs provide a fully integrated, highly
secure networking and converged IP communications solution. From a single platform with an integrated switch,
you can connect IP phones, wireless access points, and IP-based video cameras to your network and power them
using IEEE 802.3af (PoE) and 802.3at (PoE+). With the optional integration of Cisco Unified Communications
Manager Express, the router can also provide call processing for the phones. As users attempt network access,
the NIMs can use IEEE 802.1X to validate the credentials of the end device and place the user in the appropriate
VLAN.
Features and Benefits
The Gigabit Ethernet LAN Switch NIMs provide increased performance levels, enhanced per-port security, and
ease of configuration. In addition, with intermodule cascading capabilities, they allow for port expandability over
time.
Table 1 lists some important business benefits of deploying an integrated switching solution.
Table 1.
Business Benefits
Customer Needs
How Addressed by Cisco NIMs
Total Cost of Ownership
● Scaled network infrastructure across
multiple sites
● Decreased costs of operating multiple
devices at the branch office
● Optimized IT resources
● An integrated switch solution lowers operating costs, simplifies troubleshooting, and enables
businesses to scale.
● One vendor also means one support center, eliminating blaming among vendors, thereby
reducing troubleshooting time.
● Cisco Smart Net Total Care™ support covers both ISRs and Cisco EtherSwitch® devices.
Ease of Management
● Reduced network complexity and
simplified branch-office router
management
● Single administration and configuration
of LAN and WAN policies
● Integrated switches allow simplified configuration and management.
● CiscoWorks LAN Management Solution (LMS), Remote Monitoring (RMON1 and RMON2), and
standards-based MIBs support provides configuration as well as detailed reporting and
troubleshooting capabilities.
● Simple Network Management Protocol Versions 1, 2, and 3 (SNMPv1, v2, and v3) offer
comprehensive in-band management, and a CLI management console provides detailed out-ofband management.
● The management interface uses standard SNMP or Secure Sockets Layer (SSL) to integrate
Cisco and third-party management systems.
Green IT
● Single power supply for Cisco
EtherSwitch device and router
● These switches provide two to eight times lower power consumption than standalone switches.
● Because no additional rack space or power supply is needed, there is less to rack, stack, and
cool.
Power over Ethernet
Although PoE has been employed for more than a decade, the technology is still evolving. New and innovative
applications continue to raise power requirements. The Cisco Gigabit Ethernet LAN Switch NIMs take advantage of
the increased power capabilities of the Cisco 4000 Series ISRs. Table 9 provides information about total PoE
(802.3af) and PoE+ (802.3at) power output per platform. Depending on the ISR platform type, total available power
offered to PoE devices by the NIMs ranges from 120W to 500W.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 11
Additional PoE features include the following:
●
Per-port power consumption control allows you to specify a maximum power setting on an individual port.
●
Per-port PoE power sensing measures the actual power being drawn, enabling more intelligent control of
powered devices.
●
The Cisco PoE MIBs provide proactive visibility into power usage and allow you to set different power-level
thresholds.
●
Cisco Discovery Protocol Version 2 allows the NIMs to negotiate a more granular power setting than the
IEEE classification provides when connecting to Cisco devices such as IP phones or access points.
Multigigabit Fabric
The LAN switch NIMs have a gigabit connection to the MGF and transparently integrate into the system.
Connecting over the MGF enables the NIM to directly communicate with other MGF-enabled modules in the
system without involving the router’s forwarding architecture (Figure 2). Throughput for direct module-to-module
traffic using the MGF will thereby not be limited by the platform’s performance license levels. Layer 2 switching of
packets is thus done at the full Gigabit Ethernet line rate, either local to each LAN switch NIM or when transferring
the MGF with multiple MGF-enabled modules installed in the system; module-to-module MGF traffic throughput is
limited to 1 Gbps.
Figure 2.
Direct Module-to-Module Connection Without Involving CPU
Applications
Small and Medium-Sized Branch Offices
The Cisco Gigabit Ethernet LAN Switch NIMs in a small to medium-sized enterprise branch-office data deployment
scenario provide the flexibility of integrated routing and switching functions in one device. This scenario allows the
deployment of high-speed connections between individual network resources such as client desktops, servers, IP
phones, wireless access points, and video devices from a single device and at the same time allows for WAN
connectivity at Layer 3 through the router.
When deployed in a unified communications environment, the 4- or 8-port NIMs transparently interoperate with
analog or digital time-division multiplexing (TDM) voice gateway modules and Cisco Unified Communications
Manager Express IP Telephony, Cisco Survivable Remote Site Telephony (SRST), or Cisco Unified Border
Element solutions.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 11
The 8-port NIM with optional PoE/PoE+ provides power and phone discovery for IP phones. In addition, the NIMs
support separate VLAN configuration for IP phones. The auxiliary VLAN feature allows network administrators to
segment phones into separate logical networks, even though the data and voice infrastructures are physically the
same. The phone discovery feature allows the 4-port and 8-port NIMs to automatically detect the presence of an IP
phone; the 8-port NIM with PoE/PoE+ will supply power to it.
Features and Benefits
Table 2 provides an overview of the architecture, features, and benefits of the 4-port and 8-port Cisco Gigabit
Ethernet LAN Switch NIMs, Table 3 lists other features of the new NIMs, and Table 4 lists the maximum number of
VLANs supported per platform.
Table 2.
Architecture, Features, and Benefits
Feature
Benefit
4 or 8 10/100/1000BASE-TX ports
● The switches offer line-rate forwarding for Layer 2 traffic on each port.
Autosensing, autonegotiation, and
Automatic Media-Dependent Interface
Crossed Over (Auto-MDIX)
● Autosensing allows the switch to detect the speed of the attached device and automatically
configure the port for 10-, 100-, or 1000-Mbps operation.
● Autonegotiation allows the switch to automatically select half- or full-duplex transmission
mode to optimize bandwidth on all the ports of the NIM.
● Auto-MDIX allows the switch to automatically detect cable type (straight-through vs.
crossover) between an attached device and the switch port.
Integrated switching
● Integrated switching provides fewer points of management for remote and small branch
offices.
Intrachassis stacking or cascading
● Grouping LAN switch NIMs together is called cascading. The NIMs are capable of
cascading on all Cisco 4000 Series ISRs using the internal MGF.
● Cascading of multiple LAN switch NIMs over the MGF allows multiple NIMs to behave as a
single switch.
● Layer 2 switching of packets can be internal to each LAN switch NIM, or they can go
through the MGF when multiple LAN switch NIMs in the system are acting as a unified
switch. The router CPU is not involved in this operation.
IEEE 802.1P QoS (Traffic Prioritization)
● This feature supports QoS based on the IEEE 802.1P class of service (CoS) and portbased prioritization, allowing the switch to change the CoS settings of tagged packets on a
per-port basis.
● Each port has four QoS queues. Strict priority is enforced by default. The routers support
SDWRR with configurable weight on each queue.
802.1Q Trunking
● This feature provides an industry wide VLAN tagging standard, allowing for trunks also to
be set up to third-party devices.
802.1D Spanning Tree Protocol
● This industry-standard link layer network protocol helps ensure a loop-free topology
between Layer 2 devices regardless of vendor. IEEE 802.1D Spanning Tree Protocol is
turned off by default.
Voice VLAN (VVLAN)
● VVLANs enable Cisco IP phones to place voice and data in their own separate VLANs. The
NIM switch port is manually configured as a trunk port to support voice and data VLANs on
the same port. The switch then uses Cisco Discovery Protocol to dynamically configure the
Cisco IP phones.
IEEE 802.1X authentication
● Support for 802.1X port-based authentication, single/multiple host mode, guest VLAN, MAC
Authentication Bypass (MAB), restricted VLAN, critical VLAN, and dynamic VLAN.
PoE+ (option)
● Cisco Gigabit Ethernet technology with the appropriate PoE+ module and internal power
supply can power Cisco IP phones and wireless access points. Support is provided for both
IEEE 802.3af (PoE) and IEEE802.3at (POE+).
IP Multicast management support
● The routers provide Internet Group Management Protocol (IGMP) Snooping in hardware for
management support.
SNMP management
● SNMP allows management of the MIB through a MIB browser.
®
Cisco IOS Software CLI
● This feature provides configuration through the Cisco IOS Software CLI and provides a
common user interface for all the router functions.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 11
Feature
Benefit
CiscoWorks support
● CiscoWorks network management software enables management on a per-port and perswitch basis, providing a common management interface for Cisco routers, switches, and
hubs.
● SNMPv1, v2, and v3 (noncryptographic) and Telnet interface support delivers
comprehensive in-band management, and a CLI management console provides detailed
out-of-band management.
● Cisco Discovery Protocol Versions 1 and 2 enable a CiscoWorks network management
station to automatically discover the switch in a network topology.
● Support is provided by the CiscoWorks LAN Management Solution.
Cisco Discovery Protocol Versions 1 and 2
● This protocol enables a CiscoWorks network management station to automatically discover
the switch in a network topology.
Cisco VLAN Trunking Protocol
(VTP; client, server, and transparent modes)
● Cisco VTP supports dynamic VLAN configuration across Cisco switches.
Cisco Configuration Professional -based
configuration and device management
● This feature simplifies initial configuration of a switch through a web-based GUI, eliminating
the need for more complex terminal emulation programs and CLI knowledge.
● Cisco Discovery Protocol reduces the cost of deployment by helping less-skilled personnel
set up switches quickly and simply.
Status-indicator LEDs
● Two LEDs per port provide visual indication of the switch-port status and PoE status.
Table 3.
New Features
Feature
LAN Switch NIM
New Feature
10/100/1000BASE-TX


IEEE 02.1Q Trunking

IEEE 802.1D Spanning Tree

Static and dynamic MAC address learning

IEEE 802.1X port-based and multiple supplicant

PoE (15.4W)

PoE+ (30W)

IEEE 802.1u (guest VLAN)

IEEE 802.1s Multiple Spanning Tree (MST)

IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

IGMP Snooping

Auxiliary VLANS

Maximum number of VLANs supported
60
Maximum number of VLAN IDs
4094
SDWRR and fixed scheduling


4 QoS queues per port


IEEE 802.1p for 802.1q tagged packets

Port-based priority for untagged packets

Priority override

Switched Port Analyzer (SPAN)

SPAN across multiple NIMs
Not supported
Number of Spanning Tree Protocol instances
1 per VLAN (60 maximum)
Per-port storm control
Not supported
MAC notification

Dynamic secure port
Not supported
Secure port filtering (port security)
Not supported
Intrachassis cascading (no external link between NIM cards)


Private VLAN edge (protected port)


© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.


Not supported
Page 5 of 11
Feature
LAN Switch NIM
New Feature
Protected port (across multiple NIMs)


Bridge protocol data unit (BPDU) guard

PortFast

Jumbo Frames

VTP (client, server, and transparent modes)

Per-VLAN Spanning Tree (PVST)

Per-port power monitoring and policing


Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP),
and Gateway Load Balancing Protocol (GLBP) on VLAN interfaces


MGF integration

CiscoWorks LAN Management Solution (LMS)

RMON support

Auto-MDIX

Cisco EtherChannel technology
Not supported
Table 4.
Maximum Number of VLANs Supported per Platform
Platform
Maximum Number of VLANs
Cisco 4221 ISR
60
Cisco 4321 ISR
60
Cisco 4331 ISR
60
Cisco 4351 ISR
60
Cisco 4431 ISR
60
Cisco 4451 ISR
60
Table 5 lists the PoE power-supply options for the Cisco 4000 Series routers.
Table 5.
Cisco 4000 Series ISRs PoE Power-Supply Product Numbers
Product Number
Description
PWR-4320-POE-AC=
Cisco 4321 PoE Power Supply
PWR-4330-POE-AC=
Cisco 4331 PoE Power Supply
PWR-4450-POE-AC=
Cisco 4351 PoE Power Supply
PWR-4430-POE-AC=
Cisco 4431 PoE Power Supply
PWR-4430-POE-AC/2=
Cisco 4431 PoE Power Supply (Redundant)
PWR-4450-POE-AC=
Cisco 4451 PoE Power Supply
PWR-4450-POE-AC/2=
Cisco 4451 PoE Power Supply (Redundant)
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 11
Platform Support
Table 6 lists the platforms that support the new 4-port and 8-port Cisco Gigabit Ethernet LAN Switch NIMs.
Table 6.
Platform Maximum Support for the 4- and 8-port Cisco Gigabit Ethernet LAN Switch NIMs
Cisco 4221
Cisco 4321
Cisco 4331
Cisco 4351
Cisco 4431
Cisco 4451
4-port non-PoE
2
2
2
3
3
3
8-port non-PoE
2
2
2
3
3
3
8-port PoE
NA
2
2
3
3
3
Maximum number of non-PoE ports
2x8
16
16
24
24
24
Maximum number of PoE ports at 30W in normal
mode
NA
3
8
16
8
16
Maximum number of ports running at 30W in boost
mode
NA
NA
NA
NA
16
33
Summary and Conclusion
As companies strive to lower the costs of operation and at the same time increase productivity of their workforce by
using network applications, higher-speed integrated branch-office solutions are required.
The Cisco Gigabit Ethernet LAN Switch NIMs enable a high level of performance as well as POE+ capabilities.
Other benefits are advanced Layer 2 switching features for data and IP communications, easy expandability, and
simplified branch-office router management.
Specifications
Table 7 gives the technical specifications of the 4-port and 8-port NIMs.
Table 7.
Technical Specifications for the 4- Port (NIM-ES2-4) and 8-Port (NIM-ES2-8 and NIM-ES2-8-P) Cisco Gigabit
Ethernet LAN Switch NIMs
Parameter
Form factor
Specification
● NIM-ES2-4: Single-wide NIM form factor
● NIM-ES2-8: Single-wide NIM form factor
● NIM-ES2-8-P: Single-wide NIM form factor
Dimensions (H x W x D)
● NIM-ES2-4: 0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm)
● NIM-ES2-8: 0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)
● NIM-ES2-8-P: 0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)
Weight
● NIM-ES2-4: 79g (0.17 lb)
● NIM-ES2-8: 108g (0.24 lb)
● NIM-ES2-8-P: 149g (0.33 lb)
Standards
IEEE protocols
● Gigabit Ethernet: IEEE 802.3 and 10BASE-T
● Gigabit Ethernet: IEEE 802.3u, 100BASE-TX, and 1000BASE-TX
● IEEE 802.1d Spanning Tree Protocol
● IEEE 802.1p CoS for Traffic Prioritization
● IEEE 802.1q VLAN
● IEEE 802.1X Security
● IEEE 802.3x Full Duplex
● IEEE 802.3af Power over Gigabit Ethernet Standard
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 11
Parameter
Specification
RFC
RFC 2284, PPP Extensible Authentication Protocol (EAP)
MIBs
● RFC 1213
● IF MIB
● CISCO-VLAN-MEMBERSHIP-MIB
● CISCO-VLAN-IFINDEX-RELATIONSHIP-MIB
● RFC 2037 ENTITY MIB
● CISCO-CDP-MIB
● RMON1-MIB
● PIM-MIB
● CISCO-IMAGE-MIB
● CISCO-FLASH-MIB
● CISCO-STP-EXTENSIONS-MIB
● OSPF MIB (RFC 1253)
● OLD-CISCO-CHASSIS-MIB
● CISCO-VTP-MIB
● IPMROUTE-MIB
● CISCO-MEMORY-POOL-MIB
● CISCO-HSRP-MIB
● OLD-CISCO-TS-MIB
● ETHER-LIKE-MIB (RFC 1643)
● CISCO-ENTITY-FRU-CONTROL-MIB.my
● CISCO-ENTITY-ASSET-MIB
● CISCO-ENTITY-FRU-CONTROL-MIB
● CISCO-RTTMON-MIB
● CISCO-PROCESS-MIB
● BRIDGE MIB (RFC 1493)
● CISCO-COPS-CLIENT-MIB
To obtain lists of supported MIBs by platform and Cisco IOS Software release, and to download MIB modules, go to
the Cisco MIB website on Cisco.com at: http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
Manageability
● SNMP and Telnet interface support delivers comprehensive in-band management, and a CLI management
console provides detailed out-of-band management.
● An embedded RMON software agent supports four RMON groups (history, statistics, alarms, and events) for
enhanced traffic management, monitoring, and analysis.
● A SPAN port can mirror traffic from one or many ports to another port for monitoring all eight RMON groups with
an RMON probe or network analyzer.
● Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a
centralized location.
● Two LEDs per port provide convenient visual indication of the port link and PoE status.
● Crash information support enables a switch to generate a crash file for improved troubleshooting.
● Show-interface capabilities provide information about the configuration capabilities of any interface.
Connectors and cabling
● 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted pair (UTP) cabling
● 100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling
● 1000BASE-TX ports: RJ-45 connectors; two-pair Category 5e and Category 6 UTP cabling
LED indicators
● Link status LED: One LED per port for indicating link status
● PoE LED: One LED per port system for PoE status indication
Power Requirements
Internal power supply
Optional PoE system power supply available for all Cisco 4000 Series routers
Internal redundant
power supply
For the Cisco 4431 and 4451 routers only
DC power support
Software support
● DC system power input available on the Cisco 4351, 4431, and 4451 routers
● PoE option not available with DC system power input
Minimum Cisco IOS-XE Software Release 3.15 for Cisco 4000 Series routers: IP Base License of the Universal image
Environmental
Operating temperature
32° to 104°F (0° to 40°C)
Operating humidity
10 to 90 percent, noncondensing
Nonoperating
temperature
-4° to 149°F (-20° to 65°C)
Operating altitude
15,000 ft (4,570m)
Regulatory compliance,
safety, and EMC
When installed in a Cisco 4000 Series router, the Cisco Gigabit Ethernet LAN Switch NIM meets the standards
(regulatory compliance, safety, and EMC) of the router itself. Refer to the data sheets for the Cisco 4000 Series
routers for more details.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 11
Cisco 4000 Series Router Modes of Operation
Table 8 describes the modes of operation for the Cisco 4000 Series routers, and Table 9 gives the power output of
the routers.
Table 8.
Modes of Operation
Mode
Description
Normal
One PoE power supply
Redundant
Two PoE internal power supplies (Cisco 4431 and 4451) for 3 PoE NIMs
Table 9.
Power Output
Cisco 4451
Cisco 4431
Cisco 4351
Cisco 4331
Cisco 4321
Normal PoE with single PoE power supply (watts)
500
250
500
250
110
Maximum number of ports running at 15.4W in normal mode
32
16
32
16
7
Maximum number of ports running at 20W in normal mode
25
12
25
12
5
Maximum power with dual PoE supplies in boost mode (watts)
1000
500
NA
NA
NA
Maximum number of ports running at 15.4W in boost mode
64
32
Maximum number of ports running at 20W in boost mode
50
25
Ordering Information
To place an order, visit the Cisco Ordering Home Page and refer to Table 10.
For more information about the Cisco 4000 Series routers, visit:
http://www.cisco.com/c/en/us/products/routers/4000-series-integrated-services-routers-isr/index.html.
Table 10.
Ordering Information
Product Number
Product Description
NIM-ES2-4=
4-port Layer 2 Gigabit Ethernet LAN Switch NIM
NIM-ES2-8=
8-port Layer 2 Gigabit Ethernet LAN Switch NIM
NIM-ES2-8-P=
8-port PoE/PoE+ Layer 2 Gigabit Ethernet LAN Switch NIM
Cisco IOS Software Support
The Cisco Gigabit Ethernet LAN Switch NIMs are supported in IP Base and later images. No Cisco IOS Software
technology or feature licenses are required. Table 11 provides the minimum Cisco IOS Software requirements.
Table 11.
Minimum Cisco IOS Software Release
Integrated Services Router
Minimum Cisco IOS Software Release
Cisco 4000 Series (except 4221)
IOS-XE 3.15.0: IP Base License of the Universal Image
Cisco 4221 Router
IOS-XE 16.4.1: IP Base License of the Universal Image
Service and Support
Leading-edge technology deserves leading-edge support. Cisco offers a wide range of services programs to
accelerate customer success. These innovative services programs are delivered through a unique combination of
people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco Services help you
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 11
protect your network investment, optimize network operations, and prepare your network for new applications to
extend network intelligence and the power of your business.
Cisco Smart Net Total Care technical support is available on a one-time or annual contract basis. Support options
range from help-desk assistance to proactive, onsite consultation.
All support contracts include:
●
Major Cisco IOS Software updates in protocol, security, bandwidth, and feature improvements
●
Full access rights to Cisco.com technical libraries for technical assistance, electronic commerce, and
product information
●
Access to the industry's largest dedicated technical support staff 24 hours a day
For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced
Services.
Cisco and Partner Services for the Branch
Services from Cisco and our partners can help you transform the branch-office experience and accelerate business
innovation and growth. We have the depth and breadth of expertise to create a clear, replicable, optimized branchoffice footprint across technologies. Planning and design services align technology with business goals and can
increase the accuracy, speed, and efficiency of deployment. Technical services help improve operational
efficiency, save money, and mitigate risk. Optimization services are designed to continuously improve performance
and help your team succeed with new technologies. For more information, visit http://www.cisco.com/go/services.
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We
can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital
financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.
And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.
For More Information
For more information about the Cisco Integrated Services Routers, visit
http://cisco.com/en/US/prod/routers/networking_solutions_products_genericcontent0900aecd806cab99.html or
contact your local Cisco account representative.
For more information about Cisco products, contact:
●
United States and Canada: 800 553 NETS (6387)
●
Europe: 32 2 778 4242
●
Australia: 612 9935 4107
●
Other: 408 526-7209
●
Web: http://www.cisco.com.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 11
Printed in USA
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-612808-08
11/16
Page 11 of 11
Download PDF
Similar pages