Page 1/6 Data sheet P/N 1308457088-E EAN 4250184133650 Patch cord Cat.6A AWG 26 7.0 m white 2015-26-11 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification • especially suitable for shielded and unshielded class EA systems • fully shielded Cat.6A patch cable AWG 26/7 • two shielded RJ45 connectors; 1:1 assignment • cable type: S/FTP 4x2xAWG 26/7 PIMF • cable sheath: LSHF(LSOH), halogen free • Cat.6A to ISO/IEC 11801 Ed.2.2 (2011-06) and IEC 61935-2 Ed. 3.0 (2010-07), certified to GHMT • class EA Link up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 • suitable for 10 GBit Ethernet(IEEE 802.3an)and Remote Powering(PoE, PoE plus and UPoE) and HDBaseT • snagless boot with integrated lever protection • colors may differ slightly due to different protection lots • standard length: 0,5; 1; 1,5; 2; 3; 4; 5; 6; 7; 8; 10; 15 and 20 m • special lengths available on demand Data sheet Page 2/6 Patch cord Cat.6A AWG 26 7.0 m white P/N 1308457088-E EAN 4250184133650 2015-26-11 Technical Data General Data Fields of application Office Design Patch cords Shielding shielded Transmission technology Copper Cable Type S/FTP Number of twisting elements 4 Twisting element Pair Wiring 1-1 Color white Dimensions Dimension - Interface 1 (L x W x H) 50.52 x 11.70 x 14.97 mm Dimension - Interface 1 (L x W x H) 1.99 x 0.46 x 0.59 in. Dimension - Interface 2 (L x W x H) 50.52 x 11.70 x 14.97 mm Dimension - Interface 2 (L x W x H) 1.99 x 0.46 x 0.59 in. Cable length (m) 7.00 m Cable length (ft) 22.97 ft Marking option by cable boot Transmission characteristics Category (ISO) 6A Class (ISO/IEC) EA Category (TIA) 6A PoE IEEE 802.3af PoE plus IEEE 802.3at UPoE yes Transmission rate up to 10 GBit IEEE 802.3an Connections/interfaces Connector technology interface 1 RJ45 plug Connector technology interface 2 RJ45 plug Number of ports interface 1 1 Number of ports interface 2 1 Number of equipped ports interface 1 1 Number of ports interface 2 equipped 1 Data sheet Page 3/6 Patch cord Cat.6A AWG 26 7.0 m white P/N 1308457088-E EAN 4250184133650 2015-26-11 Technical Data Connections/interfaces Number of positions/contacts interface 1 8P/8C Number of positions/contacts interface 2 8P/8C Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG 26/7 Conductor cross section, stranded wire 0.141 mm² Conductor diameter, stranded wire (bare copper) 0.483 mm Conductor diameter, stranded wire (bare copper) 0.019 in. Electrical characteristics Current carrying capacity max. 1 A Rated voltage max. 50 V Contact resistance max. 20 mOhm Through resistance max. 200 mOhm Insulation resistance min. 100 MOhm Dielectric strength conductor-conductor (primarily) max. 500 V DC Dielectric strength conductor-conductor (secondary) max. 500 V DC Mechanical characteristics Position/mounting of latch - standard installation position top Materials and material properties Material - Cable jacket LSHF (LSOH) Material - Plug housing interface 1 PC (polycarbonate) Material - Plug housing interface 2 PC (polycarbonate) Material - Contact interface 1 CuSn (tin bronze) Material - Contact interface 2 CuSn (tin bronze) Material - Contact finish interface 1 Au (gold) Material - Contact finish interface 2 Au (gold) Material - Contact carriers interface 1 Plastics Material - Contact carriers interface 2 Plastics Material - Shield interface 1 CuSn (tin bronze) Material - Shield interface 2 CuSn (tin bronze) Material - Shield finish interface 1 Sn (tin) Material - Shield finish interface 2 Sn (tin) Data sheet Page 4/6 Patch cord Cat.6A AWG 26 7.0 m white P/N 1308457088-E EAN 4250184133650 2015-26-11 Technical Data Materials and material properties Halogen free yes Environmental conditions Temperature (min. - max.) Temperature - Storage °C -20 - 60 °C Temperature - Storage °F -4 - 140 °F Temperature - Operating °C -20 - 60 °C Temperature - Operating °F -4 - 140 °F Temperature - Installation °C 0 - 50 °C Temperature - Installation °F 32 - 122 °F Certifications GHMT Component yes Approvals RoHS compliant The product meets the following standards Generic cabling systems General requirements Connectors for electronic equipment Free and fixed connectors ISO/IEC 11801 Ed.2.2: 2011-06 | DIN EN 50173-1: 2011-09 TIA/EIA 568-C.2 DIN EN 60603-7 Information technology equipment DIN EN 55022 Radio disturbance characteristics Specification for the testing of balanced and coaxial information technology cabling Cords as specified in ISO/IEC 11801 and related IEC 61935-2 Ed. 3.0 (2010-07) standards Classifications ETIM 5.0 EC001262 Data sheet Page 5/6 Patch cord Cat.6A AWG 26 7.0 m white P/N 1308457088-E EAN 4250184133650 2015-26-11 Technical Data Packing details Type of packaging 1 pc(s) / plastic bag Packaging unit - Weight (gram) 294.00 g Packaging unit - Weight (pound) 0.65 lb Data sheet Patch cord Cat.6A AWG 26 7.0 m white Page 6/6 P/N 1308457088-E EAN 4250184133650 2015-26-11 Illustrations Dimensional drawing Powered by TCPDF (www.tcpdf.org)