SUBMITTAL
Micro Projector Lift
by
TECHNICAL
INFORMATION
Ceiling-Recessed Projector Lift with a 35 lb. (16kg) Lifting Capacity
Please check all appropriate selections and attach room schedule with verified dimensions.
Specifications
MICRO PROJECTOR LIFT
Select Optional Accessories (drawings on pages 2 & 3)
MICRO PROJECTOR LIFTS. Maximum capacity 35 lbs. Grey baked
powder coat finish. Projector bolts to operating pan or mounts to pan with optional
SMS Low Profile Mount. Electrically operated 110-120V AC, 60 Hz 3-wire motor,
instantly reversible, lifetime lubricated, with internal thermal overload protector and
electric brake. Draws 1.2 amp. Preset, accessible limit switches to adjust up and
down stopping positions. Projector to be suspended from 2¾"x 20" x 20" x 1/8" thick
aluminum pan, which is stabilized by 3 sets of scissors and operated by two, 1"
wide Kevlar belts. Lift equipped with scissors on the left, right and rear. Scissor arms
of nylon reinforced with long glass fibers. Scissor folding mechanism designed for
tight stacking, with closed height not to exceed 5" (not including projector, projector mount/bracket or ceiling closure). Also equipped with fail-safe inertial safety belt
system and Cable Management System for projector power cord. Ceiling closure
panel, finished in white baked enamel or recessed to accept ceiling tile, shall descend
smoothly with projector. Trim kit, when required, shall finish ceiling edges. Entire unit
certified by Underwriters’ Laboratories for the U.S. and Canada. U. S.
OPTIONS
Optional Ceiling Access Door:
Allows access above finished ceiling (highly recommended).
White Painted Finish Accepts Ceiling Tile
Optional Environmental Air Space Housing: Small
Large
Optional Ceiling Closure Panel not included
Optional Ceiling Closure Panel:
Small
Large
Pairs with Environmental Air Space Housing.
Optional Ceiling Finish Kit: Small
Large
Ceiling Closure Panel and Trim Kit used to finish ceiling opening
when no Environmental Air Space Housing is needed.
Optional Universal Projector Mount (max. load 26 lbs).
Optional Video Conferencing Camera Adapter Bracket
Small (9" w. x 7½"h. x 7½" d.)
Large (12" w. x 9" h. x 9" d.)
Custom for oversize or dual cameras
OPTIONAL ENVIRONMENTAL AIR SPACE HOUSING: Aluminum and steel, for use in
environmental air space. Includes trim ring for ceiling opening.
FACTORY INSTALLED CABLES AVAILABLE
CEILING ACCESS DOOR provides ceiling access when unit is installed above hard
ceiling and access to projector is not convenient. To be finished by ceiling contractor to
match ceiling.
OPTIONAL UNIVERSAL PROJECTOR MOUNT: Fits most projectors up to 26 lbs. Tilt,
yaw and pan adjustment.
OPTIONAL VIDEO CONFERENCING CAMERA ADAPTER BRACKET: Enables installation of a video conferencing camera in MPL. Available in two sizes (Dimensions SMALL
7½" x 9" x 7½" or LARGE 9" x 12" x 9"). Special brackets available for oversize or dual
camera installation.
Select factory installed cables for Video and Projector Control?
PLEASE NOTE: The Micro Projector Lift should be specified in conjunction with a Draper
video format motorized screen. Specifications subject to change without notice.
Select Voltage
Patent Pending
Patent information available at http://www.draperinc.com/legal/patents/
Downloadable 3-part specifications are available at www.draperinc.com.
Please note: Dimensions of rollers, operators and hardware at manufacturer’s discretion.
Yes
No (Note: Cables are Optional, not plenum rated and are unshielded)
What type of connectors do you need? (Inputs to Projector and Outputs at top of Lift)
BNC
How Many? ___
RCA
How Many? ___
RS232 (DB9) How Many? ___
HDMI
How Many? ___
15 Pin HD How Many? ___
S-Video How Many? ___
Cat 6
How Many? ___
* Please note: There is a limit of four (4) cables per Micro Projector Lift.
110-120V
220-230V
Will this unit be controlled by other equipment?
No.
Yes. What kind of equipment?
Select Control Options:
Please Note: This Draper motorized lift comes with one 110V-120V AC
3-position wall switch (silver wall plate with black rocker).
Dimensions & Data
Height of lift in closed position 1
Maximum Overall lift dimensions (Wx L)
Ceiling opening (with closure)
Optional Env. Air Space Housing (WxL) 2
Max. projector size (with closure) (Wx L) 3
Max. down travel
Approx. travel time to lowest position
Total Capacity (lbs.) 4
Net weight of lift (lbs.) 5
Amperes
Micro Projector Lift
5"
21" x 20¾"
23½" x 23½"
23½" x 23½"
20" x 20"
48"
27 sec.
35
35
1.2
Not including projector, mount or closure.
2
Max. Env. Air Space Height: 205/8". Min. Env. Air Space Height: 125/8".
3
Max. Available Projector/Bracket Height (with Env. Air Space Housing): 13½".
Min. Available Projector/Bracket Height (with Env. Air Space Housing): 5½".
4
Does not include any load placed on Lift’s pre-wired power cable.
1
Total number of 110-120V AC switches (switches operate independently)
Substitute white switch(es) for silver wall plate with black rocker
Optional Lift Low Voltage Control Module
24 Volt 3-Button Switch
How many switches?
Radio Frequency Remote Control (only with 24V)
Infrared Remote Control (only with 24V)
Optional Key Operated Switch
Power Supply Key Switch (On-off)
3-Position Key Control
3-Position Switch with Hinged Key-Locking Coverplate
Optional Video Interface Control
VIC-115 Override Switch
VIC-12
Override Switch
VIC-6 Override Switch
PROJECT:
ARCHITECT:
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2017 All Rights Reserved | FORM: MPL_Sub17
CONTRACTOR:
SUPPLIER:
DATE:
REVISED:
Micro Projector Lift
page 2 of 2
Dimensions
MPL Hole Spacing
U.S.
5” Closed
53” Extended
Metric
8x Ø
18"
205/8"
Between Rod 20 11/16"
Center of Rod 21"
Varies with
Projector
Bracket
and Room
Conditions
8xn 9.5 mm
3/8"
52.4
cm
45.7
cm
MPL Mounting Holes 18"
MPL Mounting Holes 45.7 cm
Plenum Mounting Holes 205/8"
233/16"
Plenum Mounting Holes 52.4 cm
58.9 cm
Ceiling Trim Ring 23 7/8"
Micro Projector Lift Wiring Diagram—Single Unit*
Motor
Lipless Closure: 22 1/8" x 22 1/8"
Red (Up)
Black (Down)
Green (Ground)
White
Black
PLEASE NOTE: Make sure the added weight of the substrate does
not exceed the stated weight capacity of the lift. Substrate should be
installed so that it is centered within the finished opening in the ceiling,
with a gap of no less that 3/16" around all edges.
Green (Ground)
LIPLESS CLOSURE OPTION is available by removing the Trim
Ring from the Closure Panel. A substrate material (ceiling tile,
gypsum board, etc.) can be attached directly to the Closure
Panel using adhesive, double-sided tape or screws.
White (Common)
Closure Panel 25"
Ground
Screw
Dashed wiring
by electrician
Environmental Air Space Housing Available Space
O
N
N
DN
UP
To 110-120v Line
LIFT
Environmental Air
Space Housing
Overall
Height
205/8" Max.
125/8" Min.
Red
Blue
* For more information
and wiring diagrams
for low voltage multiple
motors and network
communication, please
see wiring diagrams
supplied with individual
items.
Available
Projector/
Bracket
Height
13½" Max.
5½" Min.
Ceiling Trim Ring
Control
switch
Black
Single gang box by others
Min. 4" x 21/8" x 17/8" deep
Location of key
operated on-off
switch if furnished
To 110-120v Line
Closure Panel
Optional Universal Projector Mount
Optional Video Conferencing Camera Adapter
2½"
5½"
(64mm)
(140mm)
12" (305mm)
7"
(178mm)
A
10" (254mm)
B
12" (305mm)
2½"
5½"
(64mm)
7"
(140mm)
12" (305mm)
(178mm)
10" (254mm)
12" (305mm)
Small
Large
C
Available Sizes:
A
B
C
7½" 7½" 9"
9"
9"
12"
Download PDF
Similar pages