Advanced User’s Guide
MFC-L8600CDW
MFC-L8650CDW
MFC-L8850CDW
MFC-L9550CDW
DCP-L8400CDN
DCP-L8450CDW
Not all models are available in all countries.
Version 0
ARL/ASA/NZ
User’s Guides and where do I find them?
Which Guide?
1
i
What’s in it?
Where is it?
Product Safety
Guide
Read this Guide first. Please read the Safety
Instructions before you set up your machine.
See this Guide for trademarks and legal
limitations.
Printed / In the Box
Quick Setup Guide
Follow the instructions for setting up your
machine and installing the drivers and
software for the operating system and
connection type you are using.
Printed / In the Box
Basic User's Guide
Learn the basic Fax (MFC models only),
Copy, Scan and Direct Print operations and
how to replace supplies. See
troubleshooting tips.
For MFC models
Printed / In the Box
Advanced User's
Guide
Learn more advanced operations: Fax (MFC
models only), Copy, security features,
printing reports and performing routine
maintenance.
(Windows®)
PDF file / CD-ROM / In the Box
(Macintosh)
PDF file / Brother Solutions
Center 1
Software and
Network User's
Guide
This Guide provides instructions for
Scanning, Printing and other operations that
can be performed by connecting your
Brother machine to a computer. You can
also find useful information about using the
Brother ControlCenter utility, using your
machine in a network environment, and
frequently used terms.
(Windows®)
HTML file / CD-ROM / In the Box
(Macintosh)
HTML file / Brother Solutions
Center 1
Google Cloud Print
Guide
This Guide provides details on how to
configure your Brother machine to a Google
account and use Google Cloud Print™
services for printing over the Internet.
PDF file / Brother Solutions
Center 1
Mobile Print/Scan
Guide for Brother
iPrint&Scan
This Guide provides useful information
about printing from your mobile device and
scanning from your Brother machine to your
mobile device when connected on a Wi-Fi®
network.
PDF file / Brother Solutions
Center 1
Web Connect Guide
This Guide provides details about how to
configure and use your Brother machine to
scan, load and view images and files on
certain websites that provide these services.
PDF file / Brother Solutions
Center 1
Visit http://solutions.brother.com/.
For DCP models
(Windows®)
PDF file / CD-ROM / In the Box
(Macintosh)
PDF file / Brother Solutions
Center 1
Table of Contents
1
General Setup
1
Memory storage..................................................................................................... 1
Set tone or pulse dialling mode
(not available in New Zealand) ........................................................................... 1
Set Daylight Saving Time ...................................................................................... 2
Set the Time Zone ................................................................................................. 2
Ecology features .................................................................................................... 3
Toner Save ...................................................................................................... 3
Sleep Time ...................................................................................................... 3
Deep Sleep mode............................................................................................ 4
Auto Power Off (DCP models only) ................................................................. 4
Quiet mode feature ................................................................................................ 4
Quiet mode ...................................................................................................... 4
Touchscreen .......................................................................................................... 5
Setting the backlight brightness....................................................................... 5
Setting the Dim Timer for the backlight ........................................................... 5
Dial Prefix (MFC models only) ............................................................................... 6
Setting up the prefix number ........................................................................... 6
Changing the prefix number ............................................................................ 6
2
Security features
7
Secure Function Lock 3.0 ...................................................................................... 7
Before you begin to use Secure Function Lock 3.0......................................... 8
Turning Secure Function Lock on/off............................................................... 8
Configure Secure Function Lock 3.0 Using Web Based Management ........... 9
Setting up the card authentication users
(For MFC-L9550CDW) .............................................................................. 10
Setting up and changing the Public user mode ............................................. 10
Switching Users............................................................................................. 11
Active Directory Authentication............................................................................ 12
Turning Active Directory Authentication Lock on/off...................................... 12
IPSec ................................................................................................................... 13
Setting Lock ......................................................................................................... 13
Setting up the administrator password .......................................................... 14
Changing the Setting Lock administrator password ...................................... 14
Turning Setting Lock on/off............................................................................ 15
Dial Restriction
(MFC models only) ........................................................................................... 15
Dial pad restriction......................................................................................... 15
Address Book restriction................................................................................ 16
Shortcuts restriction....................................................................................... 16
LDAP server restriction.................................................................................. 16
ii
3
Sending a fax (MFC models only)
17
Additional sending options...................................................................................17
Sending faxes using multiple settings ...........................................................17
Changing a 2-sided fax layout (MFC-L8850CDW and MFC-L9550CDW) ....18
Contrast .........................................................................................................19
Changing Fax Resolution ..............................................................................19
Additional sending operations..............................................................................20
Sending a fax manually .................................................................................20
Dual access ...................................................................................................20
Broadcasting..................................................................................................21
Real Time Transmission ................................................................................23
Overseas Mode .............................................................................................23
Delayed Fax ..................................................................................................24
Delayed batch transmission ..........................................................................24
Checking and cancelling waiting jobs ............................................................25
Setting your changes as the new default.......................................................25
Restoring all fax settings to the factory settings ............................................26
Saving fax options as a Shortcut ...................................................................26
Electronic cover page ....................................................................................27
Destination Display ........................................................................................29
4
Receiving a fax
(MFC models only)
30
Memory Receive Options ....................................................................................30
Fax Forwarding..............................................................................................30
Fax Storage ...................................................................................................31
Changing Memory Receive Options ..............................................................31
Turning off Memory Receive Options ............................................................32
Remote retrieval ..................................................................................................33
Setting a Remote Access Code.....................................................................33
Using your Remote Access Code..................................................................33
Remote fax commands..................................................................................34
Retrieving fax messages ...............................................................................35
Changing the Fax Forwarding number ..........................................................35
Additional receiving operations............................................................................36
Printing a reduced incoming fax ....................................................................36
2-sided printing for Fax mode ........................................................................36
Setting the Fax Receive Stamp .....................................................................37
Printing a fax from the memory .....................................................................37
Out of Paper Reception .................................................................................37
5
Dialling and storing numbers (MFC models only)
38
Additional dialling operations ...............................................................................38
Combining Address Book numbers ...............................................................38
Additional ways to store numbers........................................................................39
Storing Address Book numbers from Outgoing Calls ....................................39
Setting up Groups for Broadcasting ..............................................................39
iii
6
Printing reports
42
Fax reports
(MFC models only) ........................................................................................... 42
Transmission Verification Report................................................................... 42
Fax Journal (Activity Report) ......................................................................... 42
Reports ................................................................................................................ 43
How to print a report ...................................................................................... 43
7
Making copies
44
Copy settings ....................................................................................................... 44
Stop copying.................................................................................................. 44
Improving copy quality................................................................................... 44
Enlarging or reducing copies ......................................................................... 45
2-sided Copying............................................................................................. 46
Tray selection ................................................................................................ 48
Adjusting Density and Contrast ..................................................................... 48
Sorting copies................................................................................................ 49
Making N in 1 copies (page layout) ............................................................... 50
2 in 1 ID Copy................................................................................................ 52
Adjusting the Colour Saturation..................................................................... 53
Making 2-sided N in 1 copies (MFC-L8650CDW, MFC-L8850CDW,
MFC-L9550CDW and DCP-L8450CDW) .................................................. 53
Removing Background Colour....................................................................... 54
Saving copy options as a Shortcut ................................................................ 55
Saving paper ................................................................................................. 55
A
Routine maintenance
56
Checking the machine ......................................................................................... 56
Printing the Test Print .................................................................................... 56
Checking the Page Counters......................................................................... 56
Checking the remaining life of toner cartridges ............................................. 56
Checking the remaining life of parts .............................................................. 56
Replacing periodic maintenance parts................................................................. 57
Packing and shipping the machine ...................................................................... 58
B
Options
61
Options ................................................................................................................ 61
Optional paper tray (For DCP-L8400CDN, DCP-L8450CDW, MFC-L8600CDW,
MFC-L8650CDW and MFC-L8850CDW
(LT-320CL))
(For MFC-L9550CDW (LT-325CL)) ................................................................. 62
Memory board...................................................................................................... 62
SO-DIMM Types............................................................................................ 62
Installing extra memory ................................................................................. 63
C
Glossary
65
iv
D
v
Index
69
1
General Setup
Set tone or pulse
dialling mode
(not available in
New Zealand)
NOTE
• This manual shows the LCD messages of
the MFC-L9550CDW unless specified.
• Most of the illustrations in this User’s
Guide show the MFC-L8850CDW.
Memory storage
Your settings are stored permanently, and in
the event of a power failure will not be lost.
Temporary settings (for example, Contrast
and Overseas Mode 1) will be lost. Also,
during a power failure the machine will retain
the date and time and programmed fax timer
jobs (for example, Delayed Fax) 1 for up to 60
hours. Other fax jobs in the machine’s
memory will not be lost 1.
1
For MFC models only
1
1
1
1
Your machine comes set for a Tone dialling
service. If you have a Pulse dialling (rotary)
service, you need to change the dialling
mode.
a
Press
b
c
Press All Settings.
d
Swipe up or down, or press a or b to
display Tone/Pulse.
Press Tone/Pulse.
e
Press Pulse (or Tone).
f
Press
.
Swipe up or down, or press a or b to
display Initial Setup.
Press Initial Setup.
.
1
Chapter 1
Set Daylight Saving
Time
You can set the machine to change for
Daylight Saving Time. If you choose Forward
Hour, it will reset the time forward one hour
and if you choose Backward Hour, it will
reset the time backward one hour.
a
Press
b
Press
Time).
c
d
Press Daylight Save.
e
Press
2
.
(Date &
Press Forward Hour or Backward
Hour.
.
Set the Time Zone
1
You can set the time zone on the machine for
your location.
a
Press
b
Press
Time).
c
d
Press Time Zone.
e
Press
.
(Date &
Enter your time zone.
Press OK.
.
1
General Setup
Ecology features
Toner Save
You can save toner using this feature. When
you set Toner Save to On, print appears
lighter. The factory setting is Off.
1
1
Sleep Time
1
The Sleep Time setting can reduce power
consumption. When the machine is in Sleep
mode (Power Save mode) it acts as though it
is turned off. The machine will wake up and
start printing when it receives a print job.
a
Press
b
c
Press All Settings.
You can choose how long the machine must
be idle before it goes into Sleep mode. The
timer will restart if any operation is carried out
on the machine, such as receiving a fax 1 or a
print job. The factory setting is three minutes.
Swipe up or down, or press a or b to
display General Setup.
When the machine goes into Sleep mode, the
Touchscreen backlight turns off.
d
e
Press General Setup.
f
g
h
Press Ecology.
i
Press
.
1
Swipe up or down, or press a or b to
display Ecology.
Press Toner Save.
Press On or Off.
.
NOTE
We do not recommend Toner Save for
printing Photo or Greyscale images.
For MFC models only
a
Press
b
c
Press All Settings.
d
e
Press General Setup.
f
g
h
Press Ecology.
i
Press
.
Swipe up or down, or press a or b to
display General Setup.
Swipe up or down, or press a or b to
display Ecology.
Press Sleep Time.
Using the Touchscreen's keyboard,
enter the length of time (0-50 minutes)
the machine will remain idle before
entering Sleep mode.
Press OK.
.
3
1
Chapter 1
Deep Sleep mode
1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will go into Deep Sleep mode
automatically. Deep Sleep mode uses less
power than Sleep mode. The machine will
wake up when it receives a job or if you press
the Touchscreen.
Quiet mode
The Quiet mode setting can reduce noise
while printing. When Quiet Mode is turned On,
the print speed becomes slower. The default
setting is Off.
When the machine is in Deep Sleep mode,
the Touchscreen backlight turns off and
blinks.
Auto Power Off (DCP models
only)
If the machine is in Deep Sleep mode for a
certain length of time, it will go into Power Off
mode. To start printing, press
on the
Touchpanel, and then send the print data.
You can choose how long the machine must
be in Deep Sleep mode before it goes into
Auto Power Off mode, by following these
steps:
a
Press
b
c
Press All Settings.
d
e
Press General Setup.
f
g
h
Press Ecology.
i
4
.
Swipe up or down, or press a or b to
display General Setup.
Swipe up or down, or press a or b to
display Ecology.
Press Auto Power Off.
Choose the length of time Off, 1hour,
2hours, 4hours or 8hours the
machine will remain idle before entering
Auto Power Off mode.
Press
.
Quiet mode feature
a
Press
b
c
Press All Settings.
d
e
Press General Setup.
f
g
h
Press Ecology.
i
Press
1
.
Swipe up or down, or press a or b to
display General Setup.
Swipe up or down, or press a or b to
display Ecology.
Press Quiet Mode.
Press On or Off.
.
1
1
General Setup
Touchscreen
Setting the backlight
brightness
You can adjust the brightness of the
Touchscreen LCD backlight. If you are having
difficulty reading the Touchscreen, try
changing the brightness setting.
a
Press
b
c
Press All Settings.
d
e
Press General Setup.
f
g
h
Press LCD Settings.
i
Press
.
Swipe up or down, or press a or b to
display General Setup.
Swipe up or down, or press a or b to
display LCD Settings.
Press Backlight.
Press Light, Med or Dark.
1
1
Setting the Dim Timer for the
backlight
1
You can set how long the Touchscreen LCD
backlight stays on after you go back to your
Home screen.
a
Press
b
c
Press All Settings.
d
e
Press General Setup.
f
g
h
Press LCD Settings.
i
.
Swipe up or down, or press a or b to
display General Setup.
Swipe up or down, or press a or b to
display LCD Settings.
Press Dim Timer.
Press Off, 10Secs, 20Secs or
30Secs.
Press
.
.
5
1
Chapter 1
Dial Prefix
(MFC models only)
Changing the prefix number
1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside
number, use this setting to automatically dial
9 for every fax you send.
Setting up the prefix number
a
Press
b
c
Press All Settings.
d
e
Press Initial Setup.
f
g
h
i
Press Dial Prefix.
.
Swipe up or down, or press a or b to
display Dial Prefix.
b
c
Press All Settings.
d
e
Press Initial Setup.
f
g
Press Dial Prefix.
h
i
Press Dial Prefix.
• If pulse dialing mode is on, # and l are not
available to use.
Press
.
Swipe up or down, or press a or b to
display Initial Setup.
Swipe up or down, or press a or b to
display Dial Prefix.
Press On (or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
Press Dial Prefix.
Do one of the following using the
Touchscreen's keyboard.
Repeat until the prefix number is
correct, and then press OK.
Enter the prefix number (up to 5 digits)
using the Touchscreen's keyboard.
Press OK.
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
.
 To change the prefix number, press
d or c to position the cursor under the
digit to be deleted and press the
Back Space button
. Then press
the correct digit.
Press On (or Off).
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
6
Press
Swipe up or down, or press a or b to
display Initial Setup.
NOTE
j
1
a
 To exit without making a change,
press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• If pulse dialing mode is on, # and l are not
available to use.
j
Press
.
1
2
Security features
Secure Function Lock
3.0
NOTE
• Secure Function Lock can be set by using
Web Based Management or BRAdmin
Professional 3 (Windows® only).
2
Secure Function Lock lets you restrict Public
access to the following machine operations:
• Only administrators can set limitations
and make changes for each user.
 Fax TX (Fax Sending) 1
• (For MFC-L9550CDW)
Use card authentication to switch to a
different user and access operations,
such as sending or receiving faxes,
copying, remote 1 or direct 2 scanning,
USB Direct Print and Web Connect.
 Fax RX (Fax Receiving) 1
 Copy
 Scan (Remote) 2 3
 Scan (Direct) 3 4
 USB Direct Print
 Print 5
2
1
Scanning, except Scan to USB
2
Scan to USB
 Web Connect (Upload)
 Web Connect (Download)
 Color Print 5 6
 Page Limits 6
1
For MFC models only
2
Scan except Scan to USB
3
Scan includes scan jobs via Brother iPrint&Scan.
4
Scan to USB
5
Print and Color Print include print jobs via Google
Cloud Print™ and Brother iPrint&Scan.
6
Available for Print, USB Direct Print, Copy and
Web Connect (Download).
This feature also prevents users from
changing the default settings of the machine
by limiting access to the machine’s settings.
Before using the security features you must
first enter an administrator password.
The administrator can set up restrictions for
individual users along with a user password.
Make a careful note of your password. If you
forget it, you will have to reset the password
stored in the machine. For information about
how to reset the password, contact Brother
customer service.
7
2
Chapter 2
Before you begin to use
Secure Function Lock 3.0
2
You can configure the Secure Function Lock
settings using a web browser. Before
configuration, the following preparations are
needed.
a
b
Start your web browser.
Type “vmachine’s IP address/” into
your browser’s address bar (where
“machine’s IP address” is the IP address
of the Brother machine).
 For example:
v192.168.1.2/
NOTE
You can find the machine’s IP address in
the Network Configuration List
(see Software and Network User's Guide).
c
Type an Administrator password in the
Login box. (This is a password to log on
to the machine’s web page.) Click .
NOTE
If you are using a web browser to
configure the machine’s settings for the
first time, set a password (see
Software and Network User's Guide).
8
Turning Secure Function
Lock on/off
a
b
c
d
Click Administrator.
Click User Restriction Function.
Select Secure Function Lock or Off.
Click Submit.
NOTE
The Secure Function Lock icon is
displayed beneath the time and date.
2
Security features
Configure Secure Function
Lock 3.0 Using Web Based
Management
Set up groups with restrictions and users with
a password and card ID (NFC ID) 1. You can
set up to 100 restricted groups and 100 users.
Configure these settings using a web
browser. To set up the web page, see Before
you begin to use Secure Function Lock 3.0
on page 8. Then follow these steps:
1
i
(For MFC-L9550CDW)
In the Card ID (NFC ID) box, type the
card number (up to 16 characters.) 1
1
2
You can use numbers from 0 - 9 and
letters from A - F (not casesensitive).
j
Select User List / Restricted
Functions from the drop-down list for
each user.
k
Click Submit.
For MFC-L9550CDW
a
b
c
Click Administrator.
Click Restricted Functions xx-xx.
Type an alphanumeric Group name (up
to 15 characters) in the User List /
Restricted Functions field.
d
In the Print and other columns, clear the
check box to restrict access to
operations. To configure the maximum
page count, select the On check box in
Page Limits, and then type the number
in the Max. Pages box.
e
f
g
Click Submit.
h
In the PIN Number box, type a four-digit
password.
Click User List xx-xx.
In the User List field, type the user
name up to 20 characters.
9
2
Chapter 2
Setting up the card
authentication users
(For MFC-L9550CDW)
Setting up and changing the
Public user mode
2
Before setting up the card authentication
users, you must set up restricted operations
and a user list using the web browser.
For more information, see Configure Secure
Function Lock 3.0 Using Web Based
Management on page 9.
a
Changing to the restricted user mode
using the Touchscreen (for more
information, see Changing to restricted
user mode using the Touchscreen
on page 11).
b
Press
c
d
Press Register Card.
e
Press OK.
Public user mode restricts the operations that
are available for all users who do not have a
password.
When you set up restrictions for Public users,
you must do it through Web Based
Management or BRAdmin Professional 3
(Windows® only) (see
Software and Network User's Guide).
a
b
c
Click Administrator.
d
Click Submit.
XXXXX
Touch the card to the NFC Reader.
The Touchscreen displays the card ID.
Click Restricted Functions xx-xx.
In the Public Mode row, clear the check
box to restrict the operation in Public
user mode. To configure the maximum
page count, select the On check box in
Page Limits, and then type the number
in the Max. Pages box.
NOTE
• To change the card ID, touch the new card
to the NFC Reader in step d.
• The NFC Reader may not be able to
detect when the card is in a case or cover.
Always remove the card from a case or
cover when you touch the card to the NFC
Reader.
10
2
Security features
Switching Users
2
This setting allows you to switch between
registered restricted users or Public mode
when Secure Function Lock is turned on.
Changing to restricted user mode
using the Touchscreen
a
Press
a
Press
b
c
Touch the card to the NFC Reader.
or
Public
XXXXX
2
Changing to restricted user mode
using the NFC Reader
(For MFC-L9550CDW)
.
(Where xxxxx is the user’s name.)
b
c
Press Change User.
d
e
Press your user name.
Swipe up or down, or press a or b to
display your user name.
Enter your four-digit user password
using the Touchscreen's keyboard.
Press OK.
NOTE
• If the current ID is restricted for the
operation you want, Access Denied
appears on the Touchscreen.
• If your ID has page limit restrictions and
has already reached the maximum
number of pages, the Touchscreen
displays Limit Exceeded or No
Permission when you try to print.
Contact your administrator to check your
Secure Function Lock Settings.
• If your ID has Color Print restrictions set
to disabled, the Touchscreen displays No
Permission or Function Locked
when you try to print coloured documents.
2
to return to the Ready screen.
When you have successfully logged in,
the Touchscreen displays
Authorization Succeeded.
NOTE
• You can log on by touching the card to the
NFC Reader even if the machine is set to
Public mode or another user is logged in.
• The NFC Reader may not be able to
detect when the card is in a case or cover.
Always remove the card from a case or
cover when you touch the card to the NFC
Reader.
Changing to Public mode using the
Touchscreen
a
Press
XXXXX
2
.
(Where xxxxx is the user’s name.)
b
Press Go to Public.
NOTE
• After a restricted user has finished using
the machine, it returns to Public mode
after one minute.
• If the operation you want is restricted for all
users, Access Denied will appear on the
Touchscreen and the Change User screen
will appear. You cannot access the
operation. Contact your administrator to
check your Secure Function Lock Settings.
• If Public Mode has Color Print
restrictions set to disabled, the
Touchscreen displays No Permission
or Function Locked when you try to
print coloured documents.
11
2
Chapter 2
Active Directory
Authentication
Active Directory Authentication restricts the
use of the Brother machine. If Active
Directory Authentication is enabled, the
machine's control panel will be locked. The
machine's settings cannot be changed until
the user enters the user ID, domain name and
password.
Active Directory Authentication includes the
following features:
 Store incoming faxes
 Obtain the machine's email address from
the LDAP server
You can change the Active Directory
Authentication setting using Web Based
Management or BRAdmin Professional 3
(Windows®).
For more information about Active Directory
Authentication, see
Software and Network User's Guide.
Turning Active Directory
Authentication Lock on/off
2
a
b
Start your web browser.
Type “http://machine’s IP address/” into
your browser’s address bar (where
“machine’s IP address” is the IP address
of the Brother machine).
 For example:
http://192.168.1.2/
c
d
e
Click Administrator.
f
Click Submit.
Click User Restriction Function.
Select Active Directory
Authentication or Off.
NOTE
• You need to configure Active Directory
Server Settings to enable Active Directory
Authentication.
• Control Panel Lock is enabled if Active
Directory Server is correctly configured.
12
2
Security features
IPSec
2
Setting Lock
2
IPsec (Internet Protocol Security) is a security
protocol that uses an optional Internet
Protocol function to prevent manipulation and
ensure the confidentiality of data transmitted
as IP packets. IPsec encrypts data carried
over the network, such as print jobs sent from
computers to a printer. Because the data is
encrypted at the network layer, applications
that use a higher-level protocol use IPsec
even if the user is not aware of its use.
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine’s settings.
IPsec supports the following operations:
(For MFC models only)
 IPsec transmissions
 IPsec settings
For more information about IPsec,
see Software and Network User's Guide.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Contact your
administrator or Brother customer service.
While the Setting Lock is On, you cannot
access the machine's settings.
Machine settings cannot be changed through
the Remote Setup utility while Setting Lock is
On.
13
2
Chapter 2
Setting up the administrator
password
2
Changing the Setting Lock
administrator password
a
Press
.
a
Press
b
c
Press All Settings.
b
c
Press All Settings.
d
e
Press General Setup.
d
e
Press General Setup.
f
g
Press Setting Lock.
f
g
h
Press Setting Lock.
i
Enter a four-digit number for the new
password using the Touchscreen's
keyboard.
Press OK.
j
Re-enter the new password again when
the Touchscreen displays Verify:.
Press OK.
k
Press
Swipe up or down, or press a or b to
display General Setup.
Swipe up or down, or press a or b to
display Setting Lock.
Enter a four-digit number for the new
password using the Touchscreen's
keyboard.
Press OK.
h
Enter the new password again when the
Touchscreen displays Verify:.
Press OK.
i
Press
14
.
.
Swipe up or down, or press a or b to
display General Setup.
Swipe up or down, or press a or b to
display Setting Lock.
Press Set Password.
Enter the old four-digit password using
the Touchscreen's keyboard.
Press OK.
.
2
Security features
Turning Setting Lock on/off
2
If you enter the wrong password, the
Touchscreen displays Wrong Password.
Enter the correct password.
Turning Setting Lock on
a
Press
b
c
Press All Settings.
d
e
Press General Setup.
f
g
h
Press Setting Lock.
.
b
Dial pad restriction
Enter the registered four-digit
administrator password using the
Touchscreen's keyboard.
Press OK.
on the Touchscreen.
Enter the registered four-digit
administrator password using the
Touchscreen's keyboard.
Press OK.
2
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialling method.
Press Lock OffOn.
䣕䣧䣶䣶䣫䣰䣩䢢䣎䣱䣥䣭
This feature is to prevent users from sending
a fax or call to a wrong number by mistake.
You can set the machine to restrict dialling
when you use the dial pad, Address Book and
Shortcuts.
If you choose Enter # Twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialling. If you
enter a different number, the Touchscreen
displays an error message.
Swipe up or down, or press a or b to
display Setting Lock.
Press
2
If you choose Off, the machine does not
restrict the dialling method.
Swipe up or down, or press a or b to
display General Setup.
Turning Setting Lock off
a
2
Dial Restriction
(MFC models only)
2
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
h
Press Dial Restriction.
i
Press
2
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Dial Restriction.
Press Dial Pad.
Press Enter # Twice, On or Off.
.
15
Chapter 2
Address Book restriction
2
LDAP server restriction
a
Press
.
a
Press
b
c
Press All Settings.
b
c
Press All Settings.
d
e
Press Fax.
d
e
Press Fax.
f
g
h
Press Dial Restriction.
Press Dial Restriction.
Press Enter # Twice, On or Off.
f
g
h
i
Press
i
Press
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Dial Restriction.
Press Address Book.
.
Shortcuts restriction
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Dial Restriction.
Press LDAP Server.
Press Enter # Twice, On or Off.
.
NOTE
2
• The Enter # Twice setting will not work
if you lift an external phone or press Hook
before entering the number. You will not
be asked to re-enter the number.
a
Press
b
c
Press All Settings.
• You cannot restrict dialing when using
Redial/Pause.
Swipe up or down, or press a or b to
display Fax.
• If you chose On or Enter # Twice, you
cannot use the Broadcasting feature.
d
e
Press Fax.
f
g
h
Press Dial Restriction.
i
Press
16
.
Swipe up or down, or press a or b to
display Dial Restriction.
Press Shortcuts.
Press Enter # Twice, On or Off.
.
2
3
Sending a fax (MFC models only)
3
Additional sending
options
Sending faxes using multiple
settings
Before you send a fax, you can change any
combination of these settings:
 2-sided Fax 1
 Contrast
 Fax Resolution
 Real Time TX
 Delayed Fax
 Batch TX
 Coverpage Note
 Coverpage Setup
 Broadcasting
For MFC-L8850CDW and MFC-L9550CDW
a
Do one of the following:
 When Fax Preview is set to Off,
press
3
Press Options.
d
e
Press the option you want.
Swipe up or down, or press a or b to
display the setting you want, and then
press the setting.
3
Do one of the following:
 Repeat steps c and d to change
more settings.
 If you are finished choosing settings,
press OK. Go to the next step for
sending your fax.
NOTE
 Overseas Mode
1
3
b
c
(Fax).
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default settings. These settings will stay
until you change them again (see Setting
your changes as the new default
on page 25).
• You can also save some of the settings
you use most often by setting them as a
Shortcut (see Saving fax options as a
Shortcut on page 26).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
The Touchscreen displays:
17
Chapter 3
Changing a 2-sided fax layout
(MFC-L8850CDW and
MFC-L9550CDW)
You must choose a 2-sided scanning format
before you send a 2-sided fax. The format
you choose will depend on the layout of your
2-sided document.
a
b
Load your document in the ADF.
Do one of the following:
 When Fax Preview is set to Off,
press
(Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c
d
Press Options.
e
f
Press 2-sided Fax.
Swipe up or down, or press a or b to
display 2-sided Fax.
Do one of the following:
 If your document is flipped on the
Long edge, press 2-sided Scan:
Long Edge.
Long edge
Portrait
18
Landscape
 If your document is flipped on the
Short edge, press 2-sided Scan:
Short Edge.
3
Short edge
Portrait
Landscape
Sending a fax (MFC models only)
Contrast
3
Changing Fax Resolution
3
For most documents the default setting of
Auto will give the best results.
Auto automatically chooses the appropriate
contrast for your document.
The quality of a fax can be improved by
changing the Fax Resolution. This is a
temporary setting that will only be active for
your next fax.
If your document is very light or very dark,
changing the contrast may improve the
quality of the fax.
a
Do one of the following:
Select Dark to make the faxed document
lighter.
press
Do one of the following:
 When Fax Preview is set to Off,
press
(Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b
c
Press Options.
d
e
Press Contrast.
Swipe up or down, or press a or b to
display Contrast.
Press Auto, Light or Dark.
NOTE
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting if you choose Photo as the Fax
Resolution.
(Fax).
 When Fax Preview is set to On, press
Select Light to make the faxed document
darker.
a
3
 When Fax Preview is set to Off,
(Fax) and Sending Faxes.
b
c
Press Options.
d
e
Press Fax Resolution.
Swipe up or down, or press a or b to
display Fax Resolution.
Press Standard, Fine, S.Fine or
Photo.
NOTE
You can choose four different resolution
settings.
Black & white
Standard
Appropriate for most typed
documents.
Fine
Good for small print and
transmits a little slower than
Standard resolution.
S.Fine
Good for small print or artwork
and transmits slower than Fine
resolution.
Photo
Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission time.
The time taken to send will increase when
selecting S.Fine or Photo.
19
Chapter 3
Additional sending
operations
Sending a fax manually
Manual transmission
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
b
3
3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing computer jobs. The Touchscreen
displays the new job number.
The number of pages you can scan into the
memory will vary depending on the type of
information that is printed on them.
NOTE
If you get an Out of Memory message
while scanning the first page of a fax,
Do one of the following:
press
to cancel scanning. If you get an
Out of Memory message while
scanning a subsequent page, you can
press Send Now to send the pages
press
(Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
Press Hook and listen for a dial tone.
Dial the fax number.
When you hear the fax tones, press Fax
Start.
 If you are using the scanner glass,
press Send.
20
3
3
Load your document.
 When Fax Preview is set to Off,
c
d
e
Dual access
scanned so far, or press
operation.
to cancel the
Sending a fax (MFC models only)
Broadcasting
3
How to broadcast a fax
a
b
Broadcasting lets you send the same fax
message to more than one fax number. You
can include Groups, Address Book numbers
and up to 50 manually dialled numbers in the
same broadcast.
Load your document.
Do one of the following:
 When Fax Preview is set to Off,
press
You can broadcast up to 350 different
numbers.
Before you begin the broadcast
3
(Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
3
Address Book numbers must be stored in the
machine’s memory before they can be used
in a broadcast (see Basic User's Guide).
c
d
Press Options.
Group numbers must also be stored in the
machine’s memory before they can be used
in a broadcast. Group numbers include many
stored Address Book numbers for easier
dialling (see Setting up Groups for
Broadcasting on page 39).
e
f
Press Broadcasting.
Swipe up or down, or press a or b to
display Broadcasting.
Press Add Number.
NOTE
If you downloaded Internet Fax:
If you want to broadcast using an E-mail
address, press
, enter the E-mail
address (see Basic User's Guide), and
press OK.
g
You can add numbers to the broadcast
in the following ways:
 Press Add Number and enter a
number using the Touchscreen's
keyboard (see Basic User's Guide).
Press OK.
 Press Add from Address book.
Swipe up or down, or press a or b to
display the number you want to add
to the broadcast. Select the check
boxes of the numbers you want to
add to the broadcast. After you select
all the numbers you want, press OK.
 Press Search in Address book.
Press the first letter of the name, and
then press OK. Press the name, and
then press the number you want to
add.
21
3
Chapter 3
h
i
After you enter all the fax numbers by
repeating steps f and g, press OK.
Press Fax Start.
After the broadcast is finished, the
machine will print a broadcast report to
let you know the results.
NOTE
Cancelling a Broadcast in progress
3
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
Press
b
Do one of the following:
.
• If you did not use up any of the numbers
for Groups, you can broadcast faxes to as
many as 350 different numbers.
 To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
• The machine’s available memory will vary
depending on the types of jobs in the
memory and the numbers used for
broadcasting. If you broadcast to the
maximum number available, you will not
be able to use dual access and delayed
fax.
 To exit without cancelling, press
 To cancel the current job, press the
button that displays the number or
name being dialled. Go to step d.
c
• If the Out of Memory message appears,
press
to stop the job. If more than one
page has been scanned, press Send Now
to send the portion that is in the machine’s
memory.
.
When the Touchscreen asks if you want
to cancel the entire broadcast, do one of
the following:
 Press Yes to confirm.
 To exit without cancelling, press No.
d
Do one of the following:
 To cancel the current job, press Yes.
 To exit without cancelling, press No.
22
Sending a fax (MFC models only)
Real Time Transmission
When you are sending a fax, the machine will
scan the document into the memory before
sending it. As soon as the telephone line is
free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately without
waiting for memory transmission. You can
turn on Real Time TX.
3
Overseas Mode
If you are having difficulty sending a fax
overseas due to a bad connection, then
turning on Overseas Mode may help.
This is a temporary setting that will only be
active for your next fax.
a
b
3
Load your document.
Do one of the following:
 When Fax Preview is set to Off,
NOTE
• If the memory is full and you are sending a
fax from the ADF, the machine will send
the document in real time (even if Real
Time TX is set to Off). If the memory is
full, faxes from the scanner glass cannot
be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
a
b
3
Load your document.
Do one of the following:
 When Fax Preview is set to Off,
press
(Fax).
 When Fax Preview is set to On, press
press
(Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c
d
Press Options.
e
f
g
h
i
Press Overseas Mode.
Swipe up or down, or press a or b to
display Overseas Mode.
Press On.
Press OK.
Enter the fax number.
Press Fax Start.
(Fax) and Sending Faxes.
c
d
Press Options.
e
f
g
h
i
Press Real Time TX.
Swipe up or down, or press a or b to
display Real Time TX.
Press On (or Off).
Press OK.
Enter the fax number.
Press Fax Start.
23
Chapter 3
Delayed Fax
3
You can store up to 50 faxes in the memory
to be sent within a 24-hour period.
a
b
Load your document.
Do one of the following:
 When Fax Preview is set to Off,
press
(Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c
d
e
f
g
h
i
Press Options.
Swipe up or down, or press a or b to
display Delayed Fax.
Press Delayed Fax.
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time.
All delayed faxes that are scheduled to be
sent at the same time to the same fax number
will be sent as one fax to save transmission
time.
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
h
Press Setup Send.
i
Press
Press Delayed Fax.
Press On.
Press Set Time.
Enter the time you want the fax to be
sent (in 24-hour format) using the
Touchscreen's keyboard.
Press OK.
NOTE
The number of pages you can scan into
the memory depends on the type of
information printed on each page.
24
Delayed batch transmission
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Send.
Press Batch TX.
Press On or Off.
.
3
Sending a fax (MFC models only)
Checking and cancelling
waiting jobs
Check which jobs are still waiting in the
memory to be sent. If there are no jobs, the
Touchscreen displays No Jobs Waiting.
You can cancel a fax job that is stored and
waiting in the memory.
a
Press
b
c
Press All Settings.
.
3
Setting your changes as the
new default
You can save the fax settings for Fax
Resolution, Contrast, Glass Scan
Size, Real Time TX, Coverpage Setup
and Overseas Mode you use most often by
setting them as the default. These settings
will stay until you change them again.
a
Press Fax.
f
Press Remaining Jobs.
Jobs that are waiting will appear on the
Touchscreen.
g
Swipe up or down, or press a or b to
scroll through the waiting jobs and press
the job you want to cancel.
h
i
Press Cancel.
Swipe up or down, or press a or b to
display Remaining Jobs.
Do one of the following:
 To cancel, press Yes. If you want to
cancel another job repeat step g.
press
When you have finished cancelling jobs,
press
.
(Fax).
 When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b
c
Press Options.
Swipe up or down, or press a or b to
choose the setting you want to change,
and then press the new option.
Repeat this step for each setting you
want to change.
d
After changing the last setting, swipe up
or down, or press a or b to display Set
New Default.
e
f
Press Set New Default.
g
Press
 To exit without cancelling, press No.
j
Do one of the following:
 When Fax Preview is set to Off,
Swipe up or down, or press a or b to
display Fax.
d
e
3
The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
.
25
3
Chapter 3
Restoring all fax settings to
the factory settings
3
You can restore all the fax settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Saving fax options as a
Shortcut
You can store all the new fax options you use
frequently by saving them as a Shortcut.
a
Do one of the following:
 When Fax Preview is set to Off,
 When Fax Preview is set to Off,
press
press
(Fax).
(Fax) and Sending Faxes.
(Fax) and Sending Faxes.
Press Options.
After changing the last setting, swipe up
or down, or press a or b to display
Factory Reset.
d
e
Press Factory Reset.
f
Press
b
c
d
The Touchscreen asks you to confirm to
change back to the factory settings.
Press Yes to confirm.
.
Enter the fax number.
Press Options.
Swipe up or down, or press a or b to
display Fax Resolution, 2-sided
Fax 1, Contrast, Real Time TX,
Overseas Mode or Glass Scan
Size, and then press the setting you
want to change. Then press the new
option you want.
Repeat this step for each setting you
want to change.
e
When you have finished choosing new
options, press OK.
f
g
Press Save as Shortcut.
h
Press a tab from 1 to 8.
i
Press
where you have not added a
Shortcut.
j
Enter a name for the Shortcut using the
Touchscreen's keyboard. (To help you
enter letters, see Basic User's Guide.)
Press OK.
k
Press OK to confirm.
1
26
(Fax).
 When Fax Preview is set to On, press
 When Fax Preview is set to On, press
b
c
Do one of the following:
Confirm the displayed list of options you
chose for the Shortcut, and then
press OK.
For MFC-L8850CDW and MFC-L9550CDW
3
Sending a fax (MFC models only)
Electronic cover page
You will need to have programmed your
Station ID in order to use this feature
(see Basic User's Guide).
You can automatically send a cover page.
Your cover page includes your Station ID, a
comment, and the name stored in the
Address Book.
You can choose one of the following preset
comments:
1.Note Off
3
Composing your own comments
You can set up two comments of your own.
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
h
i
Press Setup Send.
j
Enter your own comment using the
Touchscreen's keyboard.
Press OK.
2.Please Call
3.Urgent
4.Confidential
Instead of using one of the preset comments,
you can enter two personal messages of your
own, up to 27 characters long.
(See Composing your own comments
on page 27.)
5.(User Defined)
3
6.(User Defined)
.
3
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Send.
Press Coverpage Setting.
Press Coverpage Note.
Press 5. or 6. to store your own
comment.
Press
to choose numbers,
letters or special characters (see
Basic User's Guide).
k
Press
.
27
Chapter 3
Send a cover page for the next fax
If you want to send a cover page for the next
fax, you can add the cover page.
a
Do one of the following:
 When Fax Preview is set to Off,
press
(Fax).
 When Fax Preview is set to On, press
3
Using a printed cover page
If you want a printed cover page you can write
on, print the sample page and attach it to your
fax.
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
h
i
Press Setup Send.
(Fax) and Sending Faxes.
b
c
Press Options.
d
e
f
g
h
Press Coverpage Setup.
Swipe up or down, or press a or b to
display Coverpage Setup.
Press Coverpage Setup.
Press On.
Press Coverpage Note.
Swipe up or down, or press a or b to
choose the comment you want to use,
and then press the comment.
Press
i
j
k
28
.
Press OK.
Enter the fax number.
Press Fax Start.
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Send.
Press Coverpage Setting.
Press Print Sample.
Press OK.
3
Sending a fax (MFC models only)
Destination Display
3
When you send a fax, the machine displays
the information from the Address Book or the
number you dialled. You can set the machine
to hide the destination information on the
Touchscreen.
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
h
Press Setup Send.
i
Press
3
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Send.
Press Destination.
Press Hidden or Display.
.
29
4
Receiving a fax
(MFC models only)
Memory Receive
Options
j
Do one of the following:
 Press Manual to enter the
forwarding fax number (up to 20
characters) using the Touchscreen's
keyboard (see Basic User's Guide).
4
Memory Receive lets you receive faxes while
you are away from the machine.
Press OK.
You can use only one Memory Receive
option at a time:
 Press Address Book.
Swipe up or down, or press a or b to
scroll until you find the fax number
where you want your faxes
forwarded.
 Fax Forwarding
 Fax Storage
 Off
Fax Forwarding
The Fax Forwarding feature lets you
automatically forward your received faxes to
another machine or to an email address. If
you choose Backup Print: On, the
machine will also print the fax.
a
Press
b
c
Press All Settings.
.
Swipe up or down, or press a or b to
display Fax.
4
Press the fax number or E-mail
address you want.
4
NOTE
• You can enter an E-mail address by
pressing
on the Touchscreen.
• If you would like to forward to an email
address you must setup your SMTP
settings or something similar.
• If you choose a Group number from the
Address Book, the faxes will be forwarded
to multiple fax numbers.
k
If Fax Preview is set to Off, press
Backup Print: On or Backup
Print: Off.
d
e
Press Fax.
f
g
Press Setup Receive.
• If you choose Backup Print: On, the
machine will also print received faxes at
your machine so you will have a copy.
Swipe up or down, or press a or b to
display Memory Receive.
• When Fax Preview is set to On, the
backup print feature does not work.
h
i
Press Memory Receive.
30
Swipe up or down, or press a or b to
display Setup Receive.
Press Fax Forward.
IMPORTANT
l
Press
.
Receiving a fax (MFC models only)
Fax Storage
The Fax Storage feature lets you store your
received faxes in the machine’s memory. You
can retrieve stored fax messages from a fax
machine at another location using the remote
retrieval commands (see Retrieving fax
messages on page 35).
Your machine will print a backup copy of each
stored fax.
a
Press
b
c
Press All Settings.
d
e
Press Fax.
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Receive.
f
g
Press Setup Receive.
h
i
Press Memory Receive.
Swipe up or down, or press a or b to
display Memory Receive.
Press Fax Storage.
To turn off Fax Storage, press Off.
Press
Changing Memory Receive
Options
4
If received faxes are in your machine’s
memory when you change the Memory
Receive operations, the Touchscreen will ask
you one of the following questions:
If received faxes have already been
printed
4
 Erase all documents?
• If you press Yes, faxes in the memory
will be erased before the setting
changes.
• If you press No, faxes in the memory
will not be erased and the setting will
be unchanged.
If unprinted faxes are in the memory
4
 Print all faxes?
• If you press Yes, faxes in the memory
will be printed before the setting
changes. If a backup copy has already
been printed.
• If you press No, faxes in the memory
will not be printed and the setting will
be unchanged.
IMPORTANT
NOTE
j
4
.
If you choose Backup Print On, the
machine will also print received faxes at
your machine so you will have a copy.
This is a safety feature in case there is a
power failure before the fax is forwarded
or a problem at the receiving machine.
31
4
Chapter 4
Turning off Memory Receive
Options
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
Press Setup Receive.
h
i
Press Memory Receive.
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Receive.
Swipe up or down, or press a or b to
display Memory Receive.
Press Off.
NOTE
The Touchscreen will give you more
options if there are received faxes still in
your machine’s memory (see Changing
Memory Receive Options on page 31).
j
32
Press
.
4
Receiving a fax (MFC models only)
Remote retrieval
4
You can change your code at any time. To
make your code inactive, press and hold
at step g to restore the default setting
– – –l, and then press OK.
You can call your machine from any touchtone phone or fax machine and then use the
remote access code and remote commands
to retrieve fax messages.
Setting a Remote Access
Code
NOTE
Using your Remote Access
Code
4
4
The Remote Access Code lets you access
the remote retrieval features when you are
away from your machine. Before you can use
the remote access and retrieval features, you
must set up your own code. The factory
default code is the inactive code (– – –l).
a
Dial your fax number from a telephone
or another fax machine using touch tone
dialling.
b
When your machine answers, during a
period of silence enter your Remote
Access Code .
a
Press
c
b
c
The machine signals if it has received
messages:
Press All Settings.
d
e
Press Fax.
f
g
Press Remote Access.
.
Swipe up or down, or press a or b to
display Fax.
 No beeps -- No messages
d
When the machine gives two short
beeps, enter a command (see Remote
fax commands on page 34). The
machine will hang up if you wait longer
than 30 seconds to enter a command.
The machine will beep three times if you
enter an invalid command.
e
Press 9 0 to reset the machine when you
are finished.
f
Hang up.
Swipe up or down, or press a or b to
display Remote Access.
Enter a three-digit code using the
numbers 0 to 9, * or # using the
Touchscreen's keyboard.
Press OK.
NOTE
DO NOT use the same code used for your
Remote Activation code (l51) or Remote
Deactivation code (#51) (see Basic User's
Guide). (For New Zealand: Remote
Activation code (l91) or Remote
Deactivation code (#91))
h
 1 long beep -- Fax messages
Press
.
NOTE
• If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait for about 100 seconds after
it starts ringing, and then enter the remote
access code within 30 seconds.
• This setting may not be available in some
countries or supported by your local
telephone company.
33
4
Chapter 4
Remote fax commands
4
Follow the commands in the table to access features when you are away from the machine. When
you call the machine and enter your remote access code (3 digits followed by l), the system will
give two short beeps and you must enter a remote command.
Remote commands
95
Change the Fax Forwarding or
Fax Storage Settings
1 OFF
You can choose Off after you have retrieved or erased all your
messages.
2 Fax Forwarding
One long beep means the change is accepted. If you hear three
short beeps, you cannot make changes because the conditions
have not been met (for example, registering a fax forwarding
number). You can register the maximum number of rings
(see Changing the Fax Forwarding number on page 35). When
you have registered the number, fax forwarding will work.
4 Fax Forwarding number
6 Fax Storage
96
97
Retrieve a fax
2 Retrieve all faxes
Enter the number of a remote fax machine to receive stored fax
messages (see Retrieving fax messages on page 35).
3 Erase faxes from the memory
If you hear one long beep, fax messages have been erased
from the memory.
Check the receiving status
1 Fax
98
Operation details
You can check whether your machine has received any faxes.
If yes, you will hear one long beep. If no, you will hear three
short beeps.
Change the Receive Mode
1 External TAD
If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90
34
Exit
Press 9 0 to stop remote retrieval. Wait for the long beep, then
replace the handset.
Receiving a fax (MFC models only)
Retrieving fax messages
You can call your machine from any touchtone telephone or fax machine and have your
fax messages sent to another machine.
Before you use this feature, you have to turn
on Fax Storage or Fax Preview (see Fax
Storage on page 31 or Basic User's Guide).
a
b
c
d
Dial your fax number.
Changing the Fax Forwarding
number
a
b
Dial your fax number.
When your machine answers, enter
your Remote Access Code (3 digits
followed by l) during a period of silence.
If you hear one long beep, you have
messages.
c
When you hear two short beeps,
press 9 6 2.
When you hear two short beeps,
press 9 5 4.
d
Wait for a long beep, and then use the
Touchpanel to enter the number of the
remote fax machine where you want
your fax messages sent, followed by ##
(up to 20 digits).
Wait for the long beep, enter the new
number (up to 20 digits) of the remote
fax machine you want your fax
messages forwarded to using the
Touchpanel, then enter ##.
NOTE
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
4
You can change your fax forwarding number
from another touch-tone telephone or fax
machine.
When your machine answers, during a
period of silence enter your Remote
Access Code (3 digits followed by l). If
you hear one long beep, you have
messages.
NOTE
e
4
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e
Press 9 0 to stop Remote Access when
you have finished.
f
Hang up after you hear your machine
beep.
35
4
Chapter 4
Additional receiving
operations
Printing a reduced incoming
fax
If you choose On, the machine reduces each
page of an incoming fax to fit on one page of
A4, Letter, Legal or Folio sized paper.
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size settings (see Basic User's Guide).
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
Press Setup Receive.
h
i
Press Auto Reduction.
j
Press
36
2-sided printing for Fax mode
4
4
Your machine prints received faxes on both
sides of the paper when 2-sided is set to
On.
Use A4 1 sized paper for this setting (60 to
105 gsm).
1
For Philippines: Letter, Legal or Folio (8.5 in. × 13 in.)
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
Press Setup Receive.
h
i
Press 2-sided.
j
Press
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Receive.
Swipe up or down, or press a or b to
display Auto Reduction.
Press On or Off.
.
4
.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Receive.
Swipe up or down, or press a or b to
display 2-sided.
Press On or Off.
.
NOTE
When 2-sided is turned on, incoming
faxes will automatically be reduced to fit
the size of paper in the paper tray.
Receiving a fax (MFC models only)
Setting the Fax Receive
Stamp
4
Printing a fax from the
memory
4
You can set the machine to print the received
date and time at the top centre of each
received fax page.
If you choose Fax Storage, you can still
print a fax from the memory when you are at
your machine (see Fax Storage on page 31).
a
Press
.
a
Press
b
c
Press All Settings.
b
c
Press All Settings.
d
e
Press Fax.
d
e
Press Fax.
f
g
Press Setup Receive.
f
g
Press Print Document.
h
i
Press Fax Rx Stamp.
h
Press
Press On or Off.
Out of Paper Reception
j
Press
As soon as the paper tray becomes empty
during fax reception, the Touchscreen
displays No Paper. Load paper in the paper
tray (see Basic User's Guide).
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Setup Receive.
Swipe up or down, or press a or b to
display Fax Rx Stamp.
.
NOTE
• Make sure you have set the current date
and time on the machine (see
Basic User's Guide).
• If you downloaded Internet Fax:
The received time and date will not appear
when using Internet Fax.
.
4
Swipe up or down, or press a or b to
display Fax.
Press a or b to display Print
Document.
Press OK.
.
4
Incoming faxes will continue to be stored in
the memory until the memory becomes full or
paper is loaded in the paper tray. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, load fresh paper in the tray.
37
5
Dialling and storing numbers
(MFC models only)
Additional dialling
operations
Combining Address Book
numbers
j
5
5
Sometimes you may want to choose from
several long-distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of longdistance carriers and credit card numbers as
Address Book numbers. You can store these
long dialling sequences by dividing them and
setting them up as separate Address Book
numbers in any combination. You can even
include manual dialling using the dial pad
(see Basic User's Guide).
For example, you might have stored ‘01632’
in Address Book: Brother 1 and ‘960555’ in
Address Book: Brother 2. You can use them
both to dial ‘01632-960555’ if you press the
following:
a
Press
b
c
Press Address Book.
d
e
f
g
Press the number.
h
i
Press the number.
38
(Fax).
Swipe up or down, or press a or b to
display the number of Brother 1.
Press Apply.
Press Address Book.
Swipe up or down, or press a or b to
display the number of Brother 2.
Press Apply.
Press Fax Start. You will dial
‘01632-960555’.
To temporarily change a number, you can
substitute part of the number by pressing it on
the dial pad. For example, to change the
number to ‘01632-960556’, you could enter
the number (Brother 1: 01632) using Address
Book, press Apply and then press 960556
on the dial pad.
NOTE
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing Pause. Each key press adds
a 3.5-second delay. You can press Pause
as many times as needed to increase the
length of the pause.
5
Dialling and storing numbers (MFC models only)
Additional ways to
store numbers
Storing Address Book
numbers from Outgoing Calls
You can store Address Book numbers from
the Outgoing Call history.
a
Press
b
c
d
e
f
g
h
Press Call History.
i
j
(Fax).
Press Outgoing Call.
Setting up Groups for
Broadcasting
5
5
5
A Group, which can be stored in the Address
Book, allows you to send the same fax
message to many fax numbers by pressing
Fax, Address Book, Group name, Apply
and Fax Start.
First, you must store each fax number in
Address Book (see Basic User's Guide).
Then you can include them as numbers in the
Group. Each Group uses up an Address
Book number. You can store up to 20 Groups,
or you can assign up to 299 numbers to a
large Group. (See Broadcasting on page 21.)
Press the number.
a
Press
Press Edit.
b
c
d
e
f
Press Address Book.
g
h
Press Add/Delete.
i
Read and confirm the displayed list of
names and numbers you have chosen,
and then press OK to save your Group.
Press Add to Address Book.
Press Name.
Enter the name (up to 15 characters)
using the Touchscreen's keyboard. (To
help you enter letters, see
Basic User's Guide.)
Press OK.
Press OK to confirm the fax or telephone
number.
Press
.
(Fax).
Press Edit.
Press Setup Groups.
Press Name.
Enter the Group name (up to 15
characters) using the Touchscreen's
keyboard.
Press OK.
Add Address Book numbers to the
Group by pressing them to display a red
checkmark.
Press OK.
39
5
Chapter 5
j
Deleting a Group
Do one of the following:
 To store another Group for
broadcasting, repeat steps c - i.
 To finish storing Groups for
broadcasting, press
.
NOTE
You can print a list of all the Address Book
numbers (see Reports on page 43).
Changing a Group name
a
Press
b
c
d
e
Press Address Book.
f
g
h
Press the Group name.
Press
b
c
d
e
Press Address Book.
f
Press the Group name.
Press OK.
g
When the Touchscreen asks Erase
this data?, press Yes.
Press Edit.
h
Press
Press Change.
Swipe up or down, or press a or b to
display the Group you want.
Press the Name.
Enter the new Group name (up to 15
characters) using the Touchscreen's
keyboard.
Press OK.
How to change the stored name:
To change a character, press d or c to
position the cursor to highlight the
incorrect character, and then press
.
Enter the new character (see
Basic User's Guide).
i
Press OK.
j
Press
.
(Fax).
Press Edit.
Press Delete.
Swipe up or down, or press a or b to
display the Group you want.
5
(Fax).
NOTE
40
a
.
5
Dialling and storing numbers (MFC models only)
Adding or deleting Group numbers
a
Press
b
c
d
e
Press Address Book.
f
g
Press the Group name.
h
i
Press Add/Delete.
j
Do the following for each number you
want to change:
5
(Fax).
Press Edit.
Press Change.
Swipe up or down, or press a or b to
display the Group you want.
5
Swipe up or down, or press a or b to
display Add/Delete.
Swipe up or down, or press a or b to
display the number you want to add or
delete.
 To add a number to the Group, press
the check box of the number to add a
check mark.
 To delete a number from the Group,
press the check box of the number to
remove the check mark.
k
l
Press OK.
m
Press
Press OK.
.
41
6
Printing reports
Fax reports
(MFC models only)
Press
i
6
6
Swipe up or down, or press a or b to
choose an interval.
If you choose Every 50 Faxes, go to
step m.
 6, 12, 24 hours, 2 or 7 days
on the Touchscreen to set up the
Transmission Verification Report and the
Journal Period.
The machine will print the report at
the chosen time and then erase all
jobs from its memory.
Transmission Verification
Report
If the machine’s memory becomes
full with 200 jobs before the time you
chose has passed, the machine will
print the Journal early and then erase
all jobs from the memory. If you want
an extra report before it is due to
print, you can print it without erasing
the jobs from the memory.
6
You can use the Transmission Verification
Report as proof that you sent a fax (see
Basic User's Guide).
Fax Journal (Activity Report)
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or 24
hours, or 2 or 7 days).
The factory setting is Every 50 Faxes.
If you set the interval to Off, you can still print
the report by following the procedure in
Reports on page 43.
a
Press
b
c
Press All Settings.
d
e
Press Fax.
f
g
h
Press Report Setting.
42
.
 Every 50 Faxes
6
The machine will print the Journal
when the machine has stored 50
jobs.
j
Press Time, and then enter the time to
start printing (in 24-hour format) using
the Touchscreen's keyboard.
(For example: enter 19:45 for 7:45 PM.)
Press OK.
k
l
If you chose Every 7 Days, press Day.
Swipe up or down, or press a or b to
display Fax.
Swipe up or down, or press a or b to
display Report Setting.
Press Journal Period.
Press Journal Period.
m
Swipe up or down, or press a or b
display Every Monday, Every
Tuesday, Every Wednesday, Every
Thursday, Every Friday, Every
Saturday or Every Sunday, and then
press the first day of the 7-day
countdown.
Press
.
Printing reports
Reports
6
The following reports are available:
1 XMIT Verify (MFC models only)
Displays the Transmission Verification
Report for your last outgoing 200 faxes
and prints the last report.
How to print a report
a
Press
b
c
Press All Settings.
d
e
Press Print Reports.
f
g
Press the report name.
2 Address Book (MFC models only)
Prints a list of names and numbers stored
in the Address Book memory, in
alphabetical order.
3 Fax Journal (MFC models only)
Prints a list of information about your last
200 incoming and outgoing faxes.
(TX: transmit.) (RX: receive.)
4 User Settings
5 Printer Settings
6 Network Configuration
Swipe up or down, or press a or b to
display Print Reports.
Swipe up or down, or press a or b to
display the report you want.
6
(MFC models only)
Do one of the following:
 For other reports, go to step i.
h
Prints a list of your current network
settings.
(MFC models only)
Do one of the following:
 To view the Transmission
Verification Report, press View on
LCD.
7 Drum Dot Print
 To print the Transmission
Verification Report, press Print
Report.
Prints the Drum Dot Check Sheet to
troubleshoot a dotted print problem.
8 WLAN Report
(MFC-L8600CDW, MFC-L8650CDW,
MFC-L8850CDW, MFC-L9550CDW and
DCP-L8450CDW)
.
 If you chose XMIT Verify, go
to step h.
Prints a list of your current settings.
Prints a list of your current printer settings.
6
i
Press OK.
Prints the result of wireless LAN
connectivity diagnosis.
43
7
Making copies
Copy settings
7
7
Improving copy quality
You can choose from a range of quality
settings. The factory setting is Auto.
You can change the copy settings for the next
copy.
 Auto
These settings are temporary. The machine
returns to its default settings one minute after
copying.
Auto is the recommended mode for
ordinary printouts. Appropriate for
documents that contain both text and
photographs.
Press Copy and then press Options. Swipe
up or down, or press a or b to scroll through
the copy settings. When the setting you want
is displayed, press it and choose your
preferred option.
 Text
When you have finished changing settings,
press Colour Start or Mono Start.
 Photo
Stop copying
7
Appropriate for documents containing
mainly text.
Better copy quality for photographs.
7
 Receipt
Appropriate for copying receipts.
To stop copying, press
44
.
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
f
g
h
Press Quality.
i
Press Colour Start or Mono Start.
(Copy).
Press Options.
Swipe up or down, or press a or b to
display Quality.
Press Auto, Text, Photo or Receipt.
If you do not want to change additional
settings, press OK.
Making copies
Enlarging or reducing copies
7
100%*
To enlarge or reduce the next copy follow
these steps:
200%
a
Load your document.
104% EXELTR
b
Press
94% A4LTR
c
d
e
Enter the number of copies you want.
f
g
h
141% A5A4
97% LTRA4
(Copy).
91% Full Page
85% LTREXE
83% LGLA4
Press Options.
78% LGLLTR
70% A4A5
Swipe up or down, or press a or b to
display Enlarge/Reduce.
50%
Custom(25-400%) 1
Press Enlarge/Reduce.
Press 100%, Enlarge, Reduce or
Custom(25-400%).
*
The factory setting is shown in Bold with an
asterisk.
1
Do one of the following:
Custom(25-400%) allows you to enter a
ratio from 25% to 400% in 1% increments.
 If you chose Enlarge, press the
enlargement or ratio you want.
i
 If you chose Reduce, swipe up or
down, or press a or b to display the
reduction ratio you want and press it.
If you do not want to change additional
settings, press OK.
j
Press Colour Start or Mono Start.
 If you chose Custom(25-400%),
press
to erase the displayed
percentage, or press d to move the
cursor, and then enter an
enlargement or reduction ratio from
25% to 400% in 1% increments.
NOTE
Page Layout is not available with
Enlarge/Reduce.
Press OK.
 If you chose 100%, go to step i.
45
7
Chapter 7
2-sided Copying
7
You must choose a 2-sided copy layout from
the following options before you can start
2-sided copying. The layout of your document
determines which 2-sided copy layout you
should choose.
(MFC-L8650CDW, MFC-L8850CDW,
MFC-L9550CDW and DCP-L8450CDW)
If you want to use the automatic 2-sided copy
feature, load your document in the ADF.
Portrait
 2–sidedi2–sided
1
(MFC-L8600CDW and DCP-L8400CDN)
1
Portrait
2
 1–sidedi2–sided Long Edge Flip
 1–sidedi2–sided Long Edge Flip
1
1
2
1
2
1
 1–sidedi2–sided Short Edge Flip
2
2
2
 2–sidedi1–sided Long Edge Flip
1
2
1
2
1
1
2
Landscape
 1–sidedi2–sided Long Edge Flip
1
1
1
2
1
2
2
 1–sidedi2–sided Short Edge Flip
1
 1–sidedi2–sided Short Edge Flip
 2–sidedi1–sided Short Edge Flip
1
1
2
2
46
2
2
1
2
2
Making copies
g
Landscape
 2–sidedi2–sided
1
1
2
2
 1–sidedi2–sided Long Edge Flip
1
2
1
2
 2–sidedi1–sided Long Edge Flip
1
1
2
1
1
Press the option you want.
j
Press Colour Start or Mono Start
to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
1
2
2
1
2
2
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
f
Press 2-sided Copy.
(Copy).
If you do not want to change additional
settings, press OK.
If you are using the scanner glass, go
to step k.
 2–sidedi1–sided Short Edge Flip
1
MFC-L8650CDW, MFC-L8850CDW,
MFC-L9550CDW and DCP-L8450CDW
h
i
2
 1–sidedi2–sided Short Edge Flip
Swipe up or down, or press a or b to
display the following layout options:
Off,
2-sided2-sided 1,
1-sided2-sided Long Edge
Flip,
2-sided1-sided Long Edge
Flip 1,
1-sided2-sided Short Edge
Flip,
2-sided1-sided Short Edge
Flip 1
k
After the machine scans the page, press
Scan to scan the next page.
l
Place the next page on the scanner
glass.
m
Press OK.
Repeat steps k to m for each page of
the layout.
n
After scanning all the pages, press
Complete in step k to finish.
Press Options.
Swipe up or down, or press a or b to
display 2-sided Copy.
47
7
Chapter 7
Tray selection
7
You can change the Tray Use option for the
next copy.
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
f
g
Press Tray Use.
(Copy).
Press Options.
Swipe up or down, or press a or b to
display Tray Use.
Press Tray#1 Only, Tray#2 Only 1,
MP Only, MP>T1>T2 1, MP>T2>T1 1,
T1>T2>MP 1 or T2>T1>MP 1.
1
T2 and Tray#2 Only appears if Tray 2 is
installed.
Adjusting Density and
Contrast
Density
7
7
Adjust the copy density to make copies
darker or lighter.
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
f
g
Press Density.
(Copy).
Press Options.
Swipe up or down, or press a or b to
display Density.
Press a level of density, from Light to
Dark.
h
If you do not want to change additional
settings, press OK.
h
If you do not want to change additional
settings, press OK.
i
Press Colour Start or Mono Start.
i
Press Colour Start or Mono Start.
NOTE
To change the default setting for Tray
Use, see Basic User's Guide.
48
Making copies
Contrast
7
Adjust the contrast to help an image look
sharper and more vivid.
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
(Copy).
Press Options.
Swipe up or down, or press a or b to
display Contrast.
f
g
h
Press Contrast.
i
Press Colour Start or Mono Start.
Press a level of contrast.
If you do not want to change additional
settings, press OK.
Sorting copies
7
You can sort multiple copies. Pages will be
sorted in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
f
g
h
Press Stack/Sort.
i
Press Colour Start or Mono Start
to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
(Copy).
Press Options.
Swipe up or down, or press a or b to
display Stack/Sort.
7
Press Sort.
Read and confirm the displayed list of
settings you have chosen. If you do not
want to change any other settings, press
OK.
If you are using the scanner glass, go
to step j.
j
After the machine scans the page, press
Yes to scan the next page.
k
Place the next page on the scanner
glass.
l
Press OK.
Repeat steps j to l for each page of
the layout.
m
After scanning all the pages, press No in
step j to finish.
49
Chapter 7
Making N in 1 copies
(page layout)
If you are using the scanner glass, go
to step k.
7
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page. If you want to copy
both sides of an ID card onto one page, see 2
in 1 ID Copy on page 52.
k
After the machine scans the page, press
Yes to scan the next page.
l
Place the next page on the scanner
glass.
m
Press OK.
Repeat steps k to m for each page of
the layout.
n
After scanning all the pages, press No in
step k to finish.
IMPORTANT
• Make sure the paper size is set to A4,
Letter, Legal, Folio , A5 1 or B5 1.
1
For 2 in 1 ID Copy
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
• (P) means Portrait and (L) means Landscape.
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
f
g
Press Page Layout.
Place your document face up in the direction
shown in the illustration:
 2in1(P)
(Copy).
 2in1(L)
Press Options.
Swipe up or down, or press a or b to
display Page Layout.
Swipe up or down, or press a or b to
display Off(1in1), 2in1(P),
2in1(L), 2in1(ID) 1, 4in1(P) or
4in1(L).
1
For information about 2in1(ID), see 2 in 1
ID Copy on page 52.
h
i
Press the option you want.
j
Press Colour Start or Mono Start
to scan the page.
If you placed the document in the ADF, the
machine scans the pages and starts printing.
50
If you are copying from the ADF:
If you do not want to change additional
settings, press OK.
 4in1(P)
 4in1(L)
7
Making copies
If you are copying from the scanner
glass:
7
Place your document face down in the
direction shown in the illustration:
 2in1(P)
 2in1(L)
 4in1(P)
7
 4in1(L)
51
Chapter 7
2 in 1 ID Copy
7
You can copy both sides of your identification
card onto one page, keeping the original card
size.
NOTE
You can copy an identification card to the
extent permitted under applicable laws
(see Product Safety Guide).
a
Place your identification card face down
near the left corner of the scanner glass.
1
1
4 mm or greater (top, left)
 Even if a document is placed on the
ADF, the machine scans from the
scanner glass when in this mode.
b
Press
c
d
e
Enter the number of copies.
f
g
Press Page Layout.
h
i
Press 2in1(ID).
52
(Copy).
Press Options.
Swipe up or down, or press a or b to
display Page Layout.
Swipe up or down, or press a or b to
display 2in1(ID).
Read and confirm the displayed list of
settings you have chosen, and then
press OK.
j
Press Colour Start or Mono Start.
The machine starts scanning one side of
the identification card.
k
After the machine has scanned one
side, press Yes. Turn over the
identification card and place it near the
left corner of the scanner glass, then
press OK to scan the other side.
NOTE
When 2 in 1 ID Copy is chosen, the
machine sets the quality to Auto, the
density to +1 and the contrast to 0.
Making copies
Adjusting the Colour
Saturation
You can change the default setting for colour
saturation.
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
f
g
h
i
Press Colour Adjust.
(Copy).
Press Options.
Swipe up or down, or press a or b to
display Colour Adjust.
7
Making 2-sided N in 1 copies
(MFC-L8650CDW,
MFC-L8850CDW,
MFC-L9550CDW and
DCP-L8450CDW)
When you make 2-sided N in 1 copies from a
2-sided document, you must choose a layout
option in 2-sided Copy Page Layout.
You will be able to access 2-sided Copy
Page Layout after selecting
2-sided2-sided for 2-sided Copy
and any N in 1 layout for Page Layout.
You must select an appropriate option in the
table.
Press Red, Green or Blue.
Bound
Edge of the
Document
Edge of the
copies to
be bound
Option you
must choose
Press a level of colour saturation.
Long Edge
Long Edge
LongEdge
LongEdge
Short Edge
LongEdge
ShortEdge
Long Edge
ShortEdge
LongEdge
Short Edge
ShortEdge
ShortEdge
Repeat steps g and h if you want to
adjust the next colour.
After adjusting the colour settings,
press
.
j
If you do not want to change additional
settings, press OK.
k
Press Colour Start.
7
Short Edge
7
IMPORTANT
• Load your document in the ADF to use the
2-sided Copy Page Layout feature.
• The 2-sided Copy Page Layout
feature does not work when you choose
2in1(ID) for Page Layout.
a
Load your document in the ADF.
b
Press
c
d
Enter the number of copies.
(Copy).
Press Options.
53
Chapter 7
e
Select 2-sided2-sided in
2-sided Copy (see 2-sided Copying
on page 46).
Removing Background
Colour
f
Select 2in1(P), 2in1(L), 4in1(P)
or 4in1(L) in Page Layout
(see Making N in 1 copies (page layout)
on page 50).
Remove Background Colour removes the
background colour of the document when
copying. Using this setting will make the copy
clearer to read and may save toner.
g
Swipe up or down, or press a or b to
display 2-sided Copy Page Layout.
NOTE
h
i
Press 2-sided Copy Page Layout.
j
k
54
Press LongEdge LongEdge,
LongEdge ShortEdge,
ShortEdge LongEdge or
ShortEdge ShortEdge.
If you do not want to change additional
settings, press OK.
Press Colour Start or Mono Start.
7
This setting is for use only when making
colour copies.
a
Load your document.
b
Press
c
d
e
Enter the number of copies.
f
g
h
Press Remove Background Colour.
i
Press Colour Start.
(Copy).
Press Options.
Swipe up or down, or press a or b to
display Remove Background
Colour.
Press Off, Low, Medium or High.
If you do not want to change additional
settings, press OK.
Making copies
Saving copy options as a
Shortcut
You can store the copy options you use most
often by saving them as a Shortcut.
a
Press
b
c
Press Options.
d
(Copy).
Swipe up or down, or press a or b to
display the following settings:
Quality
Enlarge/Reduce
Density
Contrast
Stack/Sort
Page Layout
Colour Adjust
2-sided Copy
2-sided Copy Page Layout 1
Tray Use
Remove Background Colour
Then press the setting you want.
Swipe up or down, or press a or b to
display the available options, and then
press your new option.
Repeat steps c and d for each setting
you want to change.
e
When you have finished choosing new
options, press Save as Shortcut.
f
Read and confirm the displayed list of
options you have chosen for the
Shortcut, and then press OK.
g
Press a tab from 1 to 8.
h
Press
where you have not added a
Shortcut.
i
Enter a name for the Shortcut using the
Touchscreen's keyboard.
(To help you enter letters, see
Basic User's Guide.)
Press OK.
j
1
7
Press OK to save your Shortcut.
MFC-L8650CDW, MFC-L8850CDW,
MFC-L9550CDW and DCP-L8450CDW
Saving paper
7
You can use the Paper Save preset to reduce
the amount of paper consumed for copies.
Paper Save uses the 4 in 1 layout and
2-sided 1 copy options.
1
MFC-L8650CDW, MFC-L8850CDW,
MFC-L9550CDW and DCP-L8450CDW
a
Load your document.
b
Press
c
Swipe left or right to display Paper
Save.
d
e
f
Press Paper Save.
(Copy).
7
Enter the number of copies.
Do one of the following:
 To change more settings, go to
step g.
 When you have finished changing
settings, go to step j.
g
h
Press Options.
i
Swipe up or down, or press a or b to
display the available options, and then
press your new option.
Repeat steps h and i for each setting
you want. When you have finished
changing settings, press OK.
j
Press Colour Start or Mono Start.
Swipe up or down, or press a or b to
display the available settings, and then
press the setting you want.
55
A
Routine maintenance
Checking the machine
Printing the Test Print
A
A
You can print a Test Print page to check your
print quality.
Checking the remaining life of
toner cartridges
Press
b
The Touchsceen displays Press [OK].
Press OK.
The machine will print the Test Print
page.
Press Toner Life.
The Touchscreen displays the
approximate remaining life of the toner
cartridges in a bar chart.
c
Press
Press
Checking the remaining life of
parts
Press
b
c
Press Test Print.
.
.
Checking the Page Counters
A
.
.
You can see the remaining life of the
machine's parts on the Touchscreen.
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
a
Press
a
Press
b
c
Press All Settings.
b
c
Press All Settings.
d
e
f
Press Machine Info..
d
e
f
.
Swipe up or down, or press a or b to
display Machine Info..
Press Machine Info..
Press Page Counter.
The Touchscreen displays the number
of pages for Total, Fax/List, Copy
and Print.
Press
.
Swipe up or down, or press a or b to
display Machine Info..
Press Parts Life.
Press a or b to see the approximate
remaining parts life of the Drum, Belt
Unit, Fuser, Laser Unit, PF Kit
MP, PF Kit 1 and PF Kit 2 1.
1
g
.
When Tray 2 is installed.
Press
.
NOTE
The remaining life of the toner cartridge is
listed on the User Settings report
(see How to print a report on page 43).
56
A
You can see the approximate remaining life
of each toner cartridge.
a
a
d
A
A
Routine maintenance
Replacing periodic
maintenance parts
A
The periodic maintenance parts must be
replaced regularly to maintain the print
quality. The parts listed in the table must be
replaced after printing approximately 50,000
pages 1 for PF Kit MP and 100,000 pages 1
for PF Kit 1, PF Kit 2 2, Fuser and Laser.
Contact Brother customer service when
these messages appear on the Touchscreen.
Touchscreen
message
Description
Replace Fuser
Replace the fuser unit.
Replace Laser
Replace the laser unit.
Replace PF Kit1
Replace the paper
feeding kit for the paper
tray.
Replace PF Kit2 2
Replace the paper
feeding kit for the lower
tray (option).
A
Replace PF Kit MP Replace the paper
feeding kit for the multipurpose tray.
1
A4 or Letter size single-sided pages.
2
When Tray 2 is installed.
57
Packing and shipping
the machine
WARNING
This machine is heavy and weighs more
than 29.0 kg. To prevent possible injuries,
at least two people should lift the machine.
One person should hold the front of the
machine, and one person should hold the
back, as shown in the illustration. Be careful
not to trap your fingers when you put the
machine down.
a
Press and hold down
to turn off the
machine. Leave the machine turned off
for at least 10 minutes to cool down.
b
Disconnect all the cables, and then
unplug the power cord from the
electrical socket.
c
Place the packing material (1) into the
carton.
A
1
FRONT
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray as you may
be injured or cause damage to the machine
because it is not attached to the Lower
Tray.
NOTE
If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
58
Routine maintenance
d
Wrap the machine in a plastic bag, then
place it on the bottom packing
material (1).
e
Place the packing material (2) marked
“RIGHT” on the right of the machine.
Place the packing material (3) marked
“LEFT” on the left of the machine. Place
the AC power cord and printed materials
in the original carton as shown in the
illustration.
LEFT
2
3
RIGHT
FRONT
1
A
f
Close the carton and tape it shut.
59
g
60
<If you have a Lower Tray>
Repack the lower tray as shown in the
illustration.
B
Options
B
Options
B
This machine has the following optional accessories. You can increase the capabilities of the
machine with these items.
Lower tray unit
SO-DIMM memory
(For DCP-L8400CDN, DCP-L8450CDW,
MFC-L8600CDW, MFC-L8650CDW and
MFC-L8850CDW)
LT-320CL
(For MFC-L9550CDW)
LT-325CL
B
61
Optional paper tray
(For DCP-L8400CDN,
DCP-L8450CDW,
MFC-L8600CDW,
MFC-L8650CDW and
MFC-L8850CDW
(LT-320CL))
(For MFC-L9550CDW
(LT-325CL))
Memory board
Your machine has 256 MB of standard
memory and one slot for optional memory
expansion. You can increase the memory up
to maximum of 512 MB by installing one SODIMM (Small Outline Dual In-line Memory
Module).
SO-DIMM Types
You can install the following SO-DIMMs:
 256 MB Kingston KTH-LJ2015/256
B
An optional lower tray can be installed on the
MFC-L8600CDW, MFC-L8650CDW,
MFC-L8850CDW, MFC-L9550CDW,
DCP-L8400CDN and DCP-L8450CDW, and
it can hold up to 500 sheets of 80 gsm paper.
When an optional tray is installed, the
machine can hold up to 800 sheets of plain
paper.
 256 MB Transcend TS256MHP423A
NOTE
• For more information, visit the Kingston
Technology's website at
http://www.kingston.com/.
• For more information, visit the Transcend
website at http://www.transcend.com.tw/.
In general, the SO-DIMM must have the
following specifications:
For setup, see the instructions that we have
supplied with the lower tray unit.
WARNING
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray. You may
injure yourself or cause damage to the
machine because the Lower Tray is not
securely attached to the machine.
62
B
Type
144-pin and 16-bit output
CAS latency
4
Clock
frequency
267 MHz (533 Mb/S/Pin) or
more
Capacity
256 MB
Height
30.0 mm
DRAM type
DDR2 SDRAM
NOTE
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from or Brother
customer service.
B
Options
Installing extra memory
a
Turn off the machine’s power switch.
Unplug the telephone line cord.
b
Disconnect the interface cable from the
machine, and then unplug the power
cord from the AC power outlet.
B
e
Hold the SO-DIMM by the edges and
align the notches in the SO-DIMM with
the protrusions in the slot. Insert the SODIMM diagonally (1), then tilt it toward
the interface board until it locks into
place (2).
1
2
NOTE
Be sure to turn off the machine’s power
switch before you install or remove the
SO-DIMM.
c
Remove the plastic (1) and then
metal (2) SO-DIMM covers.
2
1
B
f
Put the metal (2) and then the plastic (1)
SO-DIMM covers back on.
1
d
Unpack the SO-DIMM and hold it by its
edges.
IMPORTANT
To prevent damage to the machine from
static electricity, DO NOT touch the
memory chips or the board surface.
2
63
g
Plug the machine’s power cord back into
the AC power outlet first, and then
connect the interface cable.
h
Plug in the telephone line cord. Turn on
the machine’s power switch.
NOTE
To make sure that you have installed the
SO-DIMM correctly, you can print the User
Settings List that shows the current RAM
SIZE, (see How to print a report
on page 43.)
64
C
Glossary
C
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
Address Book
Names and numbers you have stored for
easy dialling.
Cancel Job
Cancels a programmed print job and
clears it from the machine’s memory.
Address Book List
A listing of names and numbers stored in
the Address Book memory, in alphabetical
order.
CNG tones
The special tones (beeps) sent by fax
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
ADF (automatic document feeder)
The document can be placed in the ADF
and scanned one page at a time
automatically.
Auto Reduction
Reduces the size of incoming faxes.
Automatic fax transmission
Sending a fax without picking up the
handset of the external telephone or
pressing Hook.
Automatic Redial
A feature that enables your machine to
redial the last fax number after five
minutes if the fax did not go through
because the line was busy.
Backup Print
Your machine prints a copy of every fax
that is received and stored in memory.
This is a safety feature so you will not lose
messages during a power failure.
Batch Transmission
As a cost saving feature, all delayed faxes
to the same fax number will be sent as one
transmission.
Beeper Volume
Volume setting for the sound when you
press a key or make an error.
Broadcasting
The ability to send the same fax message
to more than one location.
Caller ID
A service purchased from the telephone
company that lets you see the number (or
name) of the party calling you.
Coding method
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JBIG, if the
receiving machine has the same
capability.
Communication error (or Comm. Error)
An error during fax sending or receiving,
usually caused by line noise or static.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Contrast
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Delayed Fax
Sends your fax at a specified later time
that day.
65
C
Density
Changing the Density makes the whole
image lighter or darker.
Fax Forwarding
Sends a fax received into the memory to
another pre-programmed fax number.
Distinctive Ring
A subscriber service purchased from the
telephone company that gives you
another telephone number on an existing
telephone line. The Brother machine uses
the new number to simulate a dedicated
fax line.
Fax Journal
Lists information about the last
200 incoming and outgoing faxes. TX
means Transmit. RX means Receive.
Dual Access
Your machine can scan outgoing faxes or
scheduled jobs into the memory at the
same time it is sending a fax, receiving a
fax, or printing an incoming fax.
ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Extension telephone
A telephone on the fax number that is
plugged into a separate wall socket.
External phone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine fast double-rings (when the
Receive Mode setting is Fax/Tel) to notify
you to pick up a voice call that it answered.
Fax Ability (New Zealand only)
A subscriber service purchased from the
telephone company that provides another
telephone number on an existing
telephone line. The brother fax machine
uses the new number to simulate a
detected fax line.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
66
Fax Storage
You can store faxes in the memory.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203  196 dpi. It is used for
small print and graphs.
Greyscale
The shades of grey available for copying
and faxing photographs.
Group number
A combination of Address Book numbers
that are stored in Address Book for
Broadcasting.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
Manual fax
When you press Hook to hear the
receiving fax machine answer before you
press Fax Start to begin transmission.
OCR (optical character recognition)
Nuance™ PaperPort™ 12 SE or Presto!
PageManager software application
converts an image of text to text you can
edit.
Glossary
Out of Paper Reception
Receives faxes into the machine’s
memory when the machine is out of paper.
Resolution
The number of vertical and horizontal lines
per inch.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Ring Delay
The number of rings before the machine
answers in Fax and Fax/Tel modes.
Pause
Allows you to place a 3.5 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing numbers in Address Book. Press
Pause as many times as needed for
longer pauses.
Pulse
A form of rotary dialling on a telephone
line.
Real Time Transmission
When memory is full, you can send faxes
in real time.
Remaining Jobs
You can check which programmed fax
jobs are waiting in the memory and cancel
the jobs individually.
Remote Access Code
Your own four-digit code (– – –l) that
allows you to call and access your
machine from a remote location.
Remote Activation code
(Fax/Tel mode only)
Press this code (l51) when you answer a
fax call on an extension or external
telephone. (l91 for New Zealand)
Remote Deactivation code
(Fax/Tel mode only)
When the machine answers a voice call, it
fast double-rings. You can pick up at an
extension or external telephone by
pressing this code (#51). (#91 for New
Zealand)
Remote Retrieval Access
The ability to access your machine
remotely from a touch tone telephone.
Ring Volume
Volume setting for the machine’s ring.
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Search
An alphabetical electronic listing of stored
Address Book and Group numbers.
Settings Tables
At-a-glance instructions that show all the
settings and options that are available for
setting up your machine.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender’s name and fax number.
TAD (telephone answering device)
You can connect an external TAD to your
machine.
Temporary settings
You can choose certain options for each
fax transmission and copy without
changing the default settings.
Tone
A form of dialling on the telephone line
used for Touch Tone telephones.
Touchscreen LCD and Touchpanel
The Touchscreen LCD (Liquid Crystal
Display) on the machine displays
interactive messages and prompts for
using the machine. You can operate the
Touchscreen by pressing or swiping on
the screen. The Touchpanel, on the right
side of the Touchscreen LCD, illuminates
its LEDs when they are available for the
current operation.
67
C
Transmission
The process of sending faxes over the
telephone lines from your machine to the
receiving fax machine.
User Settings List
A printed report that shows the current
settings of the machine.
Xmit Report (Transmission Verification
Report)
A listing for each transmission, that shows
its date, time and number.
68
D
Index
Numerics
2-sided copy .............................................46
A
Address Book
broadcasting .........................................21
using Groups .....................................21
Group dial
setting up Groups for broadcasting ....39
Apple Macintosh
See Software and Network User's Guide.
Auto Power Off ...........................................4
B
Broadcasting ............................................21
cancelling ..............................................22
setting up Groups for ............................39
C
Cancelling
broadcast in process .............................22
fax jobs in memory ................................25
fax storage ............................................31
jobs awaiting redial ...............................25
memory receive options ........................32
ControlCenter2 (for Macintosh)
See Software and Network User's Guide.
ControlCenter4 (for Windows®)
See Software and Network User's Guide.
Copy
2 in 1 ID Copy ...................................... 52
2-sided ................................................. 46
button ................................................... 44
contrast ................................................ 49
density .................................................. 48
Enlarge/Reduce ................................... 45
N in 1 (page layout) .............................. 50
quality ................................................... 44
saving paper ......................................... 55
sort ....................................................... 49
temporary settings ................................ 44
using scanner glass .................47, 49, 50
Cover page .............................................. 27
custom comments ................................ 27
printed form .......................................... 28
D
Daylight Saving Time ................................ 2
Deep Sleep mode ...................................... 4
Delayed batch transmission .................... 24
Destination Display .................................. 29
Dialing
dial prefix ................................................ 6
Dialling
Groups (broadcasting) ......................... 21
restricting dialling ................................. 15
Drum unit
checking (remaining life) ...................... 56
Dual access ............................................. 20
E
Enlarge/Reduce ....................................... 45
69
D
F
M
Fax codes
changing ...............................................33
remote access code ..............................33
Fax forwarding
changing remotely .......................... 34, 35
programming a number .........................30
Fax storage ..............................................31
printing from memory ............................37
turning off ..............................................32
turning on ..............................................31
Fax, stand-alone
receiving
fax forwarding ............................. 30, 34
fax receive stamp ...............................37
into memory (fax storage) ..................31
reducing to fit on paper ......................36
retrieving from a remote site ....... 34, 35
sending .................................................17
broadcasting ......................................21
cancelling from memory .....................25
contrast ..............................................19
delayed batch .....................................24
delayed fax .........................................24
destination display .............................29
from memory (dual access) ...............20
manual ...............................................20
overseas ............................................23
real time transmission ........................23
resolution ...........................................19
Machine information
checking remaining life of parts ............ 56
page counts .......................................... 56
Macintosh
See Software and Network User's Guide.
Maintenance, routine ............................... 56
checking the remaining life of parts ...... 56
Manual
transmission ......................................... 20
Memory
adding DIMM (option) ........................... 62
installing ............................................ 63
storage ................................................... 1
G
Groups for broadcasting ..........................39
70
N
N in 1 (page layout) ................................. 50
Network
faxing
See Software and Network User's Guide.
printing
See Software and Network User's Guide.
scanning
See Software and Network User's Guide.
Nuance™ PaperPort™ 12SE
See Software and Network User's Guide.
and Help in the PaperPort™ 12SE
application to access How-to-Guides.
O
Outgoing Calls
Add to Address Book ............................ 39
P
S
Page layout (N in 1) .................................50
PC-Fax
See Software and Network User's Guide.
Power failure ..............................................1
Presto! PageManager
See Software and Network User's Guide.
See also Help in the Presto! PageManager
application.
Print
fax from memory ...................................37
reports ...................................................43
Printing
See Software and Network User's Guide.
Scanning
See Software and Network User's Guide.
Security
restricting dialling ................................. 15
Setting lock ........................................... 13
Sleep mode ............................................... 3
Sort .......................................................... 49
Q
Quality
copying .................................................44
Quiet mode ................................................4
R
T
Temporary copy settings ......................... 44
Toner Save ................................................ 3
Touchscreen
backlight brightness ............................... 5
W
Windows®
See Software and Network User's Guide.
Wireless Network
See Quick Setup Guide and Software and
Network User's Guide.
Reducing
copies ...................................................45
incoming faxes ......................................36
Remote retrieval .......................................33
access code ..........................................33
commands ............................................34
getting your faxes .................................35
Remote setup
See Software and Network User's Guide.
Reports ............................................. 42, 43
Address Book .......................................43
Drum Dot Print ......................................43
Fax Journal .................................... 42, 43
journal period .....................................42
how to print ...........................................43
Network Configuration ..........................43
Printer Setttings ....................................43
Transmission Verification ......................42
User Settings ........................................43
WLAN Report ........................................43
Resolution
fax (standard, fine, superfine, photo) ....19
setting for next fax ................................19
D
71
Visit us on the World Wide Web
http://www.brother.com/
These machines are approved for use in the country of purchase only. Local Brother companies
or their dealers will only support machines purchased in their own countries.
www.brotherearth.com
Download PDF
Similar pages