Connector hood - SACB-C-H180-4/ 8-15,0PUR SCO

https://www.phoenixcontact.com/us/products/1537899
Connector hood - SACB-C-H180-4/ 8-15,0PUR SCO - 1537899
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Connector hood, Application: Sensor/actuator box, Number of slots: 4, Slot assignment: Double, Status
indication: No; Master cable connection: Pluggable screw connection 180°, PUR/PVC, Cable length: 15 m,
Shielding: No
Key Commercial Data
Packing unit
1 pc
Weight per Piece (excluding packing)
2230.0 g
Custom tariff number
85444290
Country of origin
Germany
Technical data
General
Rated voltage
120 V
Current carrying capacity per I/O signal
2A
Total rated current
10 A
Number of slots
4
Ambient conditions
Degree of protection
IP65
IP67
IP69K
Ambient temperature (operation)
-30 °C ... 80 °C
-40 °C ... 90 °C (for fixed installation)
-5 °C ... 80 °C (for flexible installation)
Master cable data/connection data
Connection method
Pluggable screw connection
Length of cable
15 m
Cable type
Master cable suitable for flexible cable conduit
04/17/2016 Page 1 / 7
https://www.phoenixcontact.com/us/products/1537899
Connector hood - SACB-C-H180-4/ 8-15,0PUR SCO - 1537899
Technical data
Master cable data/connection data
Signal line cross section
8x 0.5 mm²
AWG signal line
20
Conductor structure signal line
64x 0.10 mm
Power supply cross section
3x 1 mm²
AWG power supply
17
Conductor structure, voltage supply
128x 0.10 mm
External diameter
9.5 mm
Max. bending cycles
1500000
Bending radius
100 mm
Traversing path
2m
Traversing rate
2 m/s
Tightening torque, cover screw
0.35 Nm
Tightening torque, union nut
2.5 Nm
Insulation material
Housing material
PBT
Material of contact, master cable side
CU alloy
Material of contact surface, master cable side
Gold-plated
Material of the contact carrier on the master cable side
PA
Pin assignment
Slot/position = Wire color or connection
1 / 4 (A) = WH
1 / 2 (B) = GY/PK
2 / 4 (A) = GN
2 / 2 (B) = RD/BU
3 / 4 (A) = YE
3 / 2 (B) = WH/GN
4 / 4 (A) = GY
4 / 2 (B) = BN/GN
1-4 / 1 (+ 120 V) = BN
1-4 / 3 (0 V) = BU
1-4 / 5 (PE) = GN/YE
Standards and Regulations
Connection in acc. with standard
CUL
04/17/2016 Page 2 / 7
https://www.phoenixcontact.com/us/products/1537899
Connector hood - SACB-C-H180-4/ 8-15,0PUR SCO - 1537899
Classifications
eCl@ss
eCl@ss 4.0
27140815
eCl@ss 4.1
27140815
eCl@ss 5.0
27143423
eCl@ss 5.1
27143423
eCl@ss 6.0
27143423
eCl@ss 7.0
27449001
eCl@ss 8.0
27279219
ETIM
ETIM 2.0
EC000200
ETIM 3.0
EC001856
ETIM 4.0
EC002585
ETIM 5.0
EC002585
UNSPSC
UNSPSC 6.01
31261501
UNSPSC 7.0901
31261501
UNSPSC 11
31261501
UNSPSC 12.01
31261501
UNSPSC 13.2
31261501
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
Approvals submitted
Approval details
04/17/2016 Page 3 / 7
https://www.phoenixcontact.com/us/products/1537899
Connector hood - SACB-C-H180-4/ 8-15,0PUR SCO - 1537899
Approvals
UL Recognized cUL Recognized cULus Recognized Accessories
Accessories
Cable by the meter
Master cable ring - SACB- 8X0,5/ 3X1,0-50,0 PUR - 1503357
Master cable for sensor/actuator boxes, with PE conductor, unshielded, material PUR/PVC, 11-pos., 8 x 0.50 mm² and 3
x 1.00 mm², length: 50 m
Master cable ring - SACB-8X0,5/3X1,0-50,0 HPUR - 1401690
Master cable ring, Application: Distributor boxes, Number of positions: 11, Cable length: 50 m
Device marking
Contactor marker – zack marker strip - SS-ZB 17,5 WH - 0804963
Contactor marker – zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat
marker groove, Lettering field: 17.5 x 9 mm
04/17/2016 Page 4 / 7
https://www.phoenixcontact.com/us/products/1537899
Connector hood - SACB-C-H180-4/ 8-15,0PUR SCO - 1537899
Accessories
Contactor marker – zack marker strip - SS-ZB 17,5 YE - 0804976
Contactor marker – zack marker strip, Strip, yellow, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat
marker groove, Lettering field: 17.5 x 9 mm
Header with metric measurement slots
Sensor/actuator box header - SACB-4/ 8-L-C GG SCO - 1516739
Sensor/actuator box header, Application: Standard, Connection method: M12-SPEEDCON-socket Metal, Number of
slots: 4, Number of positions: 5, Coding: A - standard, Slot assignment: Double, Status indication: Yes, pnp; Master cable
connection: Pluggable screw connection, Shielding: No
Labeled device marker
Contactor marker – zack marker strip - SS-ZB 17,5 WH CUS - 0824468
Contactor marker – zack marker strip, can be ordered: Strip, white, labeled according to customer specifications,
Mounting type: Snap into flat marker groove, Lettering field: 17.5 x 9 mm
Contactor marker – zack marker strip - SS-ZB 17,5 YE CUS - 0824469
Contactor marker – zack marker strip, can be ordered: Strip, yellow, labeled according to customer specifications,
Mounting type: Snap into flat marker groove, Lettering field: 17.5 x 9 mm
Screwdriver tools
04/17/2016 Page 5 / 7
https://www.phoenixcontact.com/us/products/1537899
Connector hood - SACB-C-H180-4/ 8-15,0PUR SCO - 1537899
Accessories
Philips screwdriver - SZK PZ1 VDE - 1206450
Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip
Tool - SAC BIT HOOD-W 24 - 1212486
Nut for assembling pressure nuts with 24 mm wrench size, for 4 mm hexagonal drive
Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
Torque tool
Torque screwdriver - TSD-M 1,2NM - 1212224
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm
Torque screwdriver - TSD 25 SAC - 1212315
Torque screwdriver, with preset torque of 2.5 Nm and 4 mm hexagonal drive for the pressure nut of the connector hood
04/17/2016 Page 6 / 7
https://www.phoenixcontact.com/us/products/1537899
Connector hood - SACB-C-H180-4/ 8-15,0PUR SCO - 1537899
Accessories
Torque screwdriver - TSD-M 3NM - 1212225
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 1.2 ‑ 3 Nm
Drawings
Cable cross section
PUR/PVC black [PUR]
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
04/17/2016 Page 7 / 7
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Phoenix Contact:
1537899
Download PDF
Similar pages