WS-POE-8-ENC 8 port passive PoE injector 10/100 speed

Wifi-Texas.com Inc
815-A Brazos #326
Austin Tx 78701
512-479-0317
Skype: wifiqos
WS-POE-8-ENC
8 port passive PoE injector
10/100 speed
Specifications
8 Port 10/100 Power over Ethernet Injector
•
– 8 Shielded RJ-45 LAN
– 8 Shielded RJ-45 LAN+POE
– 2 pairs per socket for data at 10/100 speeds
– 2 pairs per socket for power
– always on PoE – no auto negotiation
– mode B operation per 802.3af definition ( power on pins 45 and 78 )
Wall mount Injector: 175 mm x 37mm x 25m ( including 2x 10mm tabs )
•
Same voltage to all ports – power shared as needed
•
LED power display – green for 45 (+) and 78 (-) and Red for reverse polarity
•
Use with any Ethernet switch – passes all management info transparently
•
Ideal for IP Cameras, VOIP phone, WiFi Access Points
•
Technical support from Austin
•
Standard power connector - 2.1mm x 5.5mm
•
operating / storage temperature range – 0 to 50 deg C
•
relative humidity range – 5 to 90% non condensing
•
the device is PELV per NFPA standard 79 – protected extra low voltage
•
no cooling is required, no fans. Quiet operation
•
Usage
Power Supply
802.3af (passive)
48 volts
30, 60, 120 watts
24 volts
60 watts
24 volt
12v, PoE
USB, iPad, 5 volt
and 12 volt non-PoE
10-12 watts
48 volts
60 watts
24 or 48 volts
Power supply options
30, 60, 120 watts
Note
IP Phones, PoE Cameras, 802.3af WiFi-Access Points
Mikrotik, Ubiquiti, Open-Mesh OM2P
Devices marked 12, PoE use 12 volts with a local supply
and 48 volts when powered by Ethernet, like Hikvision, Swann,
Dahua
use our 5v and 12 volt and USB splitters to deliver the exact
voltage needed at up to 328 ft.
Download PDF
Similar pages