MFC-3220C MFC-3420C MFC-3320CN MFC

SOFTWARE USER’S GUIDE
MFC-3220C
MFC-3420C
MFC-3320CN
MFC-3820CN
Table of Contents
1
Using the machine as a printer .......................................... 1-1
Using the Brother MFC printer driver................................ 1-1
Features ........................................................................... 1-1
Choosing the right type of paper ...................................... 1-2
How to print your document.............................................. 1-2
Simultaneous printing and faxing ..................................... 1-3
Clearing data from the memory ........................................ 1-3
Checking the Print Quality ................................................ 1-3
Printer operation keys....................................................... 1-3
Job Cancel (MFC-3420C only) ................................... 1-3
Printer driver settings (Windows® only) ............................ 1-4
How to access the printer driver settings.......................... 1-4
Basic tab........................................................................... 1-5
Media Type................................................................. 1-6
Quality ........................................................................ 1-6
Bi-Directional Printing ................................................. 1-7
Paper Size .................................................................. 1-8
Page Layout ............................................................... 1-8
Border Line ............................................................. 1-8
Orientation .................................................................. 1-9
Copies ........................................................................ 1-9
Collate .................................................................... 1-9
Reverse Order........................................................ 1-9
Advanced tab.................................................................. 1-10
Colour ....................................................................... 1-11
Colour/Grayscale.................................................. 1-11
Image Type .......................................................... 1-11
Custom Image Type ............................................. 1-12
Halftone Pattern ................................................... 1-13
Colour Enhancement............................................ 1-14
Scaling...................................................................... 1-16
Watermark............................................................ 1-17
In background....................................................... 1-17
In Outline Text
(Windows® 2000 Professional/XP Only)........... 1-17
Print Watermark ................................................... 1-17
Watermark Style................................................... 1-18
Device Options ......................................................... 1-19
Print Date & Time ................................................. 1-19
Quick Print Setup ................................................. 1-20
Support tab ............................................................... 1-21
i
Brother Solutions Centre ...................................... 1-21
Web Update.......................................................... 1-21
Check Setting ....................................................... 1-21
2
ii
How to scan using Windows® ............................................. 2-1
Scanning a document (For Windows® 98/98SE/Me and
2000 Professional only) ................................................. 2-2
TWAIN compliant........................................................ 2-2
How to access the Scanner ........................................ 2-3
Scanning a document into the PC .............................. 2-4
Scanning a whole page .......................................... 2-4
Pre-Scanning to crop a portion you want to scan... 2-5
Settings in the Scanner window.................................. 2-7
Image Type............................................................. 2-7
Resolution............................................................... 2-7
Scan Type .............................................................. 2-8
Brightness............................................................... 2-8
Contrast .................................................................. 2-8
Document Size ....................................................... 2-9
Scanning a document (For Windows® XP only) ............. 2-11
WIA compliant........................................................... 2-11
How to access the scanner....................................... 2-11
Scanning a document into the PC
(MFC-3220C and MFC-3320CN only)..................2-12
Scanning a document into the PC
(MFC-3420C and MFC-3820CN only)..................2-14
Scanning a document using the ADF ................... 2-14
Pre-Scanning to crop a portion you want to
scan using the scanner glass
(MFC-3420C and MFC-3820CN only).............. 2-16
Brother Scanner Utility.......................................... 2-18
Using the Scan key (For USB cable users) .................... 2-19
Scan to E-mail .......................................................... 2-20
Scan to Image .......................................................... 2-20
Scan to OCR............................................................. 2-21
Scan to File...............................................................2-21
Scan to Card
(MFC-3320CN and MFC-3820CN only) ............... 2-22
Changing the default quality ................................. 2-23
Changing the default Black & White file format ....2-23
Changing the default colour file format................. 2-23
Using ScanSoft® PaperPort® and TextBridge® OCR ......2-24
Viewing items............................................................ 2-25
Organizing your items in folders ............................... 2-26
Quick links to other applications ............................... 2-26
ScanSoft® TextBridge® OCR lets you convert
image text into text you can edit ........................... 2-27
You can Import items from other applications .......... 2-27
You can Export items in other formats ..................... 2-28
Exporting an image file ......................................... 2-28
How to Uninstall PaperPort® and
ScanSoft® TextBridge® ......................................... 2-28
3
Using the Brother Control Center ...................................... 3-1
Brother MFL-Pro Control Center ................................ 3-1
AutoLoad the Brother Control Center ......................... 3-2
How to turn off AutoLoad............................................ 3-2
Brother Control Center features ....................................... 3-3
Auto Configuration...................................................... 3-3
Scan to operations...................................................... 3-4
Copy operations ......................................................... 3-4
PC-Fax operation ....................................................... 3-4
Scanner settings for Scan, Copy and
PC-Fax buttons ...................................................... 3-5
Global settings............................................................ 3-5
Setting up the scanner configurations ........................ 3-6
Performing an operation from the Control Center
screen..................................................................... 3-7
Scan to File....................................................................... 3-8
To access Scan to File Configurations screen ........... 3-8
Scanner settings......................................................... 3-8
Destination folder........................................................ 3-9
Scan to E-mail ................................................................ 3-10
To access Scan to E-mail Configurations screen..... 3-10
Scanner settings....................................................... 3-10
E-mail application ..................................................... 3-11
Send to Options........................................................ 3-11
Scan to OCR (Word Processor) ..................................... 3-12
To access Scan to OCR Configurations screen ....... 3-12
Scanner settings....................................................... 3-12
Word Processor........................................................ 3-13
Scan to Image ................................................................ 3-14
To access Scan to Image Configurations screen ..... 3-14
Scanner settings....................................................... 3-15
Target Application..................................................... 3-15
Copy ............................................................................... 3-16
To access the Copy Configurations screen.............. 3-16
Scanner settings....................................................... 3-17
iii
Number of copies...................................................... 3-17
Send a fax....................................................................... 3-18
To access the Send a fax Configurations screen ..... 3-18
Scanner settings....................................................... 3-18
PC-FAX settings ....................................................... 3-19
4
5
iv
Using the Windows® XP-Based Brother SmartUI
Control Center ...................................................................... 4-1
Brother SmartUI Control Center ....................................... 4-1
AutoLoad the Brother Control Center ......................... 4-2
How to turn off Auto Load ........................................... 4-2
Brother Control Center features........................................ 4-3
Auto Configuration ...................................................... 4-4
Hardware Section: Changing the Scan to button
configuration .................................................................. 4-5
Scan to E-mail ............................................................ 4-6
Scan to File................................................................. 4-7
Scan to Image ............................................................ 4-8
Scan to OCR............................................................. 4-10
Software Section............................................................. 4-12
Scan ......................................................................... 4-13
Copy ......................................................................... 4-13
Fax............................................................................ 4-14
Custom ..................................................................... 4-14
Scan to File..................................................................... 4-15
Scan to E-mail ................................................................ 4-17
File attachments ....................................................... 4-19
Scanner settings....................................................... 4-20
Scan to OCR (Word Processing program) ..................... 4-21
Scan to Graphics application
(example: Microsoft Paint) ........................................... 4-23
Copy ......................................................................... 4-25
PC Fax setting (PC-FAX using the Brother Fax Driver)....4-27
FAX settings ............................................................. 4-28
Custom: User-defined buttons ........................................ 4-29
Customizing a user-defined button ........................... 4-29
1. Select the Scan Action .....................................4-29
2. Select Configuration for the Scan Type............4-30
3. Select Scan Settings. ....................................... 4-34
Using MFC Remote Setup ................................................... 5-1
MFC Remote Setup .......................................................... 5-1
6
7
Using Brother PC-FAX software ......................................... 6-1
PC-FAX sending............................................................... 6-1
Setting up user information......................................... 6-2
Sending setup............................................................. 6-3
Outside line access .................................................... 6-4
Include header............................................................ 6-4
Address Book file........................................................ 6-4
User interface ............................................................. 6-5
Simple style ............................................................ 6-5
Facsimile style........................................................ 6-5
Speed-Dial setup .............................................................. 6-6
The Address Book ...................................................... 6-7
Setting up a Member in the Address Book ................. 6-8
Setting up a Group for Broadcasting .......................... 6-9
Editing Member information...................................... 6-10
Deleting a Member or Group .................................... 6-10
Exporting the Address Book ..................................... 6-10
Importing to the Address Book ................................. 6-12
Setting up a Cover Page .......................................... 6-14
Entering Coverpage Information............................... 6-15
Sending a file as a PC-FAX using the Facsimile
style user interface ............................................... 6-16
Redial ................................................................... 6-17
Sending a file as a PC-FAX using the Simple style
user interface........................................................ 6-17
Setting up PC-FAX receiving
(Windows® 98/98SE/Me and 2000 Professional)
(MFC-3320CN and MFC-3820CN only) ...................... 6-19
Running PC-FAX Receiving ..................................... 6-19
Setting up your PC ................................................... 6-19
Viewing new PC-FAX messages.............................. 6-20
Receiving a fax into the PC (Windows® XP only)
(MFC-3320CN and MFC-3820CN only) ...................... 6-21
How to receive a fax automatically ........................... 6-21
How to view the received faxes ................................ 6-26
Using the PhotoCapture Center™ from your PC
(For Windows®) (MFC-3320CN and MFC-3820CN only) ... 7-1
For USB cable users ........................................................ 7-1
For Network cable users................................................... 7-3
v
8
9
10
vi
Network Scanning
(MFC-3320CN and MFC-3820CN only) ............................... 8-1
Network License ......................................................... 8-1
Registering your PC with the machine........................ 8-1
Using the Scan key........................................................... 8-5
Scan to E-mail (PC) .................................................... 8-5
Scan to Image ............................................................ 8-6
Scan to OCR............................................................... 8-7
Scan to File................................................................. 8-8
Using your machine with a Macintosh® ............................. 9-1
Setting up your USB-equipped Apple® Macintosh® ......... 9-1
Using the Brother printer driver with your Apple®
Macintosh® (Mac OS® 8.6-9.2) ...................................... 9-2
Using the Brother Printer Driver with Your Apple®
Macintosh® (Mac OS® X)............................................... 9-4
Choosing page setup options ..................................... 9-4
Choosing printing options ........................................... 9-5
Sending a fax from your Macintosh® application .............. 9-6
For Mac OS® 8.6 - 9.2 users ...................................... 9-6
For Mac OS® X users ................................................. 9-8
Drag a vCard from the Mac OS® X Address Book
application ............................................................ 9-10
Scanning from a Macintosh® .......................................... 9-12
Accessing the scanner.............................................. 9-12
Scanning an image into your Macintosh® ................. 9-13
Scanning a whole page ........................................ 9-13
Pre-Scanning an image ............................................9-14
Settings in the Scanner window................................ 9-15
Image.................................................................... 9-15
Scanning Area ...................................................... 9-17
Business Card Size
(MFC-3420C and MFC-3820CN only).............. 9-17
Adjusting the Image.............................................. 9-18
Using Presto! PageManager® ......................................... 9-19
Highlights .................................................................. 9-19
System requirements for Presto! PageManager® ..... 9-20
Technical Support..................................................... 9-20
MFC Remote Setup (Mac OS® X) .................................. 9-22
Using the PhotoCapture Center™ from a Macintosh®
(MFC-3320CN and MFC-3820CN only) ...................... 9-24
Index ....................................................................................... I-1
1
Using the machine as a
printer
Using the Brother MFC printer driver
A Printer Driver is software that translates data from the format used
by a computer into the format required by a particular printer, using
a printer command language or page description language.
The printer drivers are on the CD-ROM we have supplied. Install the
drivers first by following the Quick Setup Guide. Also, the latest printer
driver can be downloaded from the Brother Solutions Center at:
http://solutions.brother.com
Features
This machine offers many features you’ll find in a high quality ink jet
printer.
Fast Printing Speed—Using Fast mode, you can print up to 12
pages per minute in full colour, and up to 14 pages per minute in
black.
Brilliant High Quality Output—Printing at up to 4800 x 1200
optimized dpi on glossy paper gives you highest resolution. (See
Resolution on page S-6 in the User’s Guide.)
Beautiful Elaborate Output—You can use 2 in 1, Watermark
(Windows® Only) printing, Colour Enhancement technology and
other features to get high quality printouts.
Low Running Cost—Whenever you run out of a particular colour
ink, you will only have to replace the cartridge that’s empty.
USB—Universal Serial Bus Interface provides fast communication
with your computer.
Straight Paper Path—The machine can print on many types of
paper. Plain paper, inkjet paper, glossy paper, transparencies and
envelopes. Use the appropriate type of paper to avoid paper jams.
For complete information about what kinds of paper to use with
the machine, read Chapter 2 Paper in MFC User’s Guide.
USING THE MACHINE AS A PRINTER 1 - 1
Choosing the right type of paper
To get high quality printing using your machine, it’s very important to
select the right type of paper. Be sure to read Chapter 2 Paper in
MFC User’s Guide before you select and purchase paper for the
machine.
How to print your document
When the machine receives data from your computer, it begins
printing by picking up paper from the paper tray. The paper tray can
feed many types of paper and envelopes.
1 From your computer select the Print command.
If your computer is also connected to any other printers, select
Brother MFC-XXXX USB Printer (Where XXXX is your model
name) as your printer driver from the Print or Print Settings
menu in your software application, and then click on OK to begin
printing. (Windows® Only)
For Macintosh® users, see Using the Brother Printer Driver with
Your Apple® Macintosh® (Mac OS® X) on page 9-4.
2
3
Your computer sends a print command and data to the machine.
The LCD shows Receiving Data.
When the machine finishes printing all the data, the LCD shows
the date and time.
You can select the paper size, and orientation in your
application software.
If your application software does not support your custom paper size,
select the next larger paper size.
Then adjust the print area by changing the right and left margins in
your application software.
1 - 2 USING THE MACHINE AS A PRINTER
Simultaneous printing and faxing
Your machine can print from your computer while sending or receiving
a fax in memory, or while scanning a document into the computer. Fax
sending will not be stopped during PC printing.
However, when the machine is copying or receiving a fax on paper, it
pauses the PC printing operation, and then continues printing when
copying or fax receiving has finished.
Clearing data from the memory
If the LCD shows Data Remains, you can clear the data that is left
in the printer memory by pressing Stop/Exit.
Checking the Print Quality
If you want to check the print quality and find out how to improve it,
See How to improve print quality on page 12-11 in the User’s Guide.
Printer operation keys
Job Cancel (MFC-3420C only)
You can stop the current print job and
clear the data from memory.
USING THE MACHINE AS A PRINTER 1 - 3
Printer driver settings
(Windows® only)
For Macintosh® users, see Using the Brother Printer Driver with
Your Apple® Macintosh® (Mac OS® X) on page 9-4.
You can change the following printer settings when you print from
your computer:
■ Media Type/Quality (Speed)
■ Page Layout
■ Colour Matching/Halftone
■ Colour Enhancement
■ Scaling
■ Watermark
■ Print Date & Time
■ Quick Print Setup
How to access the printer driver settings
1
2
Select Print from the File menu in your application software.
Select Brother MFC-XXXX USB Printer (Where XXXX is your
model name) as your printer and click Properties. The Printer
dialog box will appear.
■ The way you access the printer driver settings depends on
your operating system and software applications.
■ The screens shown in this section are from Windows® XP.
The screens on your Computer may vary depending on your
Windows Operating System.
■ Descriptions in this chapter are based on the MFC-3220C.
These descriptions also apply to the other machines.
1 - 4 USING THE MACHINE AS A PRINTER
Basic tab
*
1
2
3
1
2
3
Select the Media Type and Quality.
Select the Paper Size, Page Layout, Border Line (if any),
Orientation, number of Copies and the page order.
Click the Apply button to apply your selected settings.
To return to the default settings, click the Default button, then
click the Apply button.
This area shows the current settings of Quality, Paper Size,
Page Layout, Orientation, Collate/Reverse Order and
Colour/Grayscale.
*
USING THE MACHINE AS A PRINTER 1 - 5
Media Type
To achieve the best print results, the media being printed on should
be selected in the driver. The machine changes the way it prints,
depending on the selected media type.
Plain Paper
Inkjet Paper
Glossy Paper (4 colour)
Glossy Paper (3 colour)
Transparencies
The print quality of black ink depends on the type of glossy
paper you are using. Black ink is used when you select Glossy
Paper (4 colour). If the glossy paper you are using repels the
black ink, select Glossy Paper (3 colour), which simulates black
ink by combining the three ink colours.
Quality
The quality selection allows you to choose the print resolution you
want for your document. Print quality and speed are related. The
higher the quality the longer it will take to print the document. The
quality selections that are available will vary depending on the media
type you select.
■ Photo: Up to 4800 x 1200 optimized dpi. (See Resolution on
page S-6 in the User’s Guide.) Use this mode to print precise
images such as photographs. This is the highest resolution and
slowest speed.
■ S.Fine (Super Fine): 1200 x 1200 dpi. Use this mode to print
precise text and photographs. Since the print data is much larger
than normal mode, the processing time, data transfer time and
print time will be longer.
■ Fine: 600 x 600 dpi. Better print quality than Normal mode and
faster print speed than Super Fine.
■ Normal: 600 x 300 dpi. Good print quality with typical print speed.
■ Fast: 600 x 150 dpi. The fastest print mode and the lowest ink
consumption. Use this mode to print large volume documents or
a document for proofing.
1 - 6 USING THE MACHINE AS A PRINTER
Media Type
Colour/Grayscale
Print Quality Selection
Plain Paper
Colour/Grayscale
Fast, Normal, Fine, S.Fine
Inkjet Paper
Colour
Fine, S.Fine, Photo
Grayscale
Fine, S.Fine, Photo
Glossy Paper (4 or 3 colour) Colour
Transparencies
S.Fine, Photo
Grayscale
S.Fine, Photo
Colour/Grayscale
Fine, S.Fine
The factory settings are shown in bold.
Bi-Directional Printing
When Bi-Directional Printing is selected, the print heads print in
both directions and offer faster print speeds. When not selected, the
print heads will only print in one direction to provide higher quality
printouts.
USING THE MACHINE AS A PRINTER 1 - 7
Paper Size
The Paper Size selection provides a large selection of standard
paper sizes. If you wish, you can create a custom size ranging from
88.9 × 101.6 mm to 215.9 × 355.6 mm. From the drop-down box,
select the Paper Size you are using.
You can enter custom size by selecting User Defined. Select the
proper paper thickness to improve the quality of your output.
Page Layout
The Page Layout selection can reduce the image size of a page
allowing multiple pages to be printed on one sheet of paper or
enlarging the image size for printing one page on multiple sheets of
paper.
If you are using Windows® 98/98SE/Me, the 4 in 1 layout is not
available.
Border Line
When printing multiple pages on one sheet with the Page Layout
feature, you can choose to have a solid border, dashed border or no
border around each page on the sheet.
1 - 8 USING THE MACHINE AS A PRINTER
Orientation
Orientation selects the position of how your document will be printed
(Portrait or Landscape).
Portrait (Vertical)
Landscape (Horizontal)
Copies
The Copies selection sets the number of copies that will be printed
(1 to 999).
Collate
With the Collate check box selected, one complete copy of your
document will be printed and then repeated for the number of copies
you selected. If the Collate check box is not selected, then each
page will be printed for all the copies selected before the next page
of the document is printed.
Reverse Order
Reverse Order prints the pages of your document in the opposite order.
USING THE MACHINE AS A PRINTER 1 - 9
Advanced tab
1
2 3 4
To return to the default settings, click the Default button.
Change the tab settings by selecting one of the following icons:
1.Colour
2.Scaling
3.Watermark
4.Device Options
1 - 10 USING THE MACHINE AS A PRINTER
Colour
Colour/Grayscale
This selection allows a colour document to be printed in black and
white using gray scale.
Image Type
The printer driver will select the most suitable colour matching and
half tone method, depending on your image type. Generally, text and
business graphics are printed vividly and photographic images are
printed softly.
■ Auto: The printer driver automatically selects the image type.
■ Photo: Select this mode for photographic images.
■ Graphics: Select this mode for documents that contain text or
business graphics (charts or clip art).
■ Custom: If you want to select the colour matching and halftone
method, manually select this mode.
USING THE MACHINE AS A PRINTER 1 - 11
Custom Image Type
You can select the colour matching method manually. Select the
best one for your document.
Match Monitor
Colour is adjusted to get the closest colour match to the PC
monitor.
■ Natural: Suitable for photographic images. The colour is
adjusted to print a more natural colour.
■ Vivid: Suitable for business graphics such as charts, graphics
and text. The colour is adjusted to give more vivid colour.
1 - 12 USING THE MACHINE AS A PRINTER
Halftone Pattern
The machine can use two methods (Diffusion or Dither) to arrange
where to place dots to express halftones. There are some predefined
patterns set for this and you can select which one to use for your
document. Select the appropriate method.
■ Diffusion: Dots are placed at random to create the halftones.
This method of printing is more suitable for printing photographs
that have delicate shades and graphics.
■ Dither: Dots are arranged in a pre-defined pattern to make
halftones. This type of printing is more suitable to printing
graphics that have definite colour boundaries or for printing
charts such as business charts.
Some halftone settings cannot be selected with certain
combinations of Media Type and Quality selections.
USING THE MACHINE AS A PRINTER 1 - 13
Colour Enhancement
This feature analyzes your image to improve quality sharpness,
white balance and colour density. This process may take several
minutes depending on the size of the image and the specifications of
your computer.
■ Colour Density
This setting adjusts the total amount of colour in the image. You
can increase or decrease the amount of colour in an image to
improve a washed out or weak picture.
■ White Balance
This setting adjusts the hue of the white areas of an image.
Lighting, camera settings and other influences will effect the
appearance of white. The white areas of a picture may be slightly
pink, yellow or some other colour. By using this adjustment you
can correct this effect and bring the white areas back to pure white.
1 - 14 USING THE MACHINE AS A PRINTER
■ Sharpness
This setting enhances the detail of an image. It is similar to adjusting
the fine focus on a camera. If the image is not in true focus and you
can not see the fine details of the picture, then adjust the sharpness.
■ Auto Image Enhance
Allows individual adjustment of picture settings to improve the
printed image and analyzes data from surrounding or
neighboring pixels in the original.
■ Brightness
This setting adjusts the brightness of the whole image. To lighten
or darken the image move the scroll bar to the left or right.
■ Contrast
This setting adjusts the contrast of an image. This will make
darker areas darker and lighter areas lighter. Increase the
contrast when you want an image to be clearer. Decrease the
contrast when you want an image to be more subdued.
■ Red
Increases the intensity of the Red colour to make the image more
red.
■ Green
Increase the intensity of the Green colour to make the image
greener.
■ Blue
Increase the intensity of the Blue colour to make the image bluer.
USING THE MACHINE AS A PRINTER 1 - 15
Scaling
You can change the print size of your document with the Scaling
feature.
■ Check Off if you want to print the document as it appears on your
screen.
■ Check Fit to Paper Size, if your document has an unusual size,
or if you have only the standard size paper.
■ Check Free if you want to reduce the size.
■ Check Mirror Print to reverse the data from left to right.
1 - 16 USING THE MACHINE AS A PRINTER
Watermark
You can place a logo or text into your document as a Watermark.
You can select one of the preset Watermarks, or you can use a
bitmap file or text file that you have created.
Check Use Watermark, and then select the watermark you want to
use.
In background
Check In background with the Watermark to print the watermark
image in the background of your document. If this feature is not
checked then the Watermark will be printed on top of your document.
In Outline Text (Windows® 2000 Professional/XP Only)
Check In Outline Text if you only want to print an outline of the watermark.
Print Watermark
The Print Watermark feature offers the following print choices:
■ On all pages
■ On first page only
■ From second page
■ Custom
USING THE MACHINE AS A PRINTER 1 - 17
Watermark Style
You can change the Watermark’s size and position on the page by
selecting the Watermark, and clicking the Edit button. If you want to
add a new Watermark, click the New button, and then select Text or
Bitmap in the Watermark Style.
■ Titile
You can select the CONFIDENTIAL, COPY or DRAFT as the
standard title or enter a title you like in the field.
■ Watermark Text
Enter your Watermark text into the Text Box, and then select the
Font, Size, Colour and Style.
■ Watermark Bitmap
Enter the file name and location of your bitmap image in the File
box, or Browse for the file location. You can also set the scaling
size of the image.
■ Position
This setting offers you the control for where the Watermark is to
be positioned on the page.
1 - 18 USING THE MACHINE AS A PRINTER
Device Options
Lets you set the following Printer Functions:
Print Date & Time
When enabled the Print Date and Time feature will print the date
and time on your document from your computer’s system clock.
Click the Setting button to change the Date and Time format, and
the Position and the Font. To include a background with the Date
and Time, select Opaque. When Opaque is selected, you can click
on the Colour button to change the colour of the Date and Time
background.
The Date and Time in the selection box shows the format that will
be printed. The actual Date and Time printed on your document
is automatically retrieved from the settings of your computer.
USING THE MACHINE AS A PRINTER 1 - 19
Quick Print Setup
The Quick Print Setup feature allows you to quickly select driver
settings. To view settings, simply click your mouse button on the task
tray icon. This feature can be set to ON or OFF from the Device
Options.
1 - 20 USING THE MACHINE AS A PRINTER
Support tab
The Support Tab provides driver version and setting information. In
addition there are links to the Brother Solutions Centre and the
Driver Update Web sites.
Click the Support tab to display the following screen:
Brother Solutions Centre
The Brother Solutions Centre is a Web site offering information
about your Brother product including FAQs (Frequently Asked
Questions), User Guides, Driver Updates and Tips for using your
machine.
Web Update
Web Update checks the Brother web site for updated drivers, and
automatically downloads and updates the printer driver on your
computer.
Check Setting
The Check Setting selection displays a list of your current driver
settings.
USING THE MACHINE AS A PRINTER 1 - 21
2
How to scan using
Windows®
The scanning operations and drivers will be different depending
on your operating system.
For Windows® 98/98SE/Me and 2000 Professional
The machine uses a TWAIN Compliant driver for scanning
documents from your applications. (See Scanning a document
(For Windows® 98/98SE/Me and 2000 Professional only),
TWAIN compliant on page 2-2.)
For Windows® XP
The machine uses Windows® Imaging Acquisition (WIA) for
scanning documents. (See Scanning a document (For
Windows® XP only) on page 2-11.)
For Macintosh®
Go to Scanning from a Macintosh® on page 9-12.
For ScanSoft®, PaperPort® and TextBridge® OCR
Go to Using ScanSoft® PaperPort® and TextBridge® OCR on
page 2-24.
Descriptions in this chapter are based on the MFC-3220C and
MFC-3420C. These descriptions also apply to the other
machines.
2 - 1 HOW TO SCAN USING WINDOWS®
Scanning a document (For Windows®
98/98SE/Me and 2000 Professional
only)
TWAIN compliant
The Brother MFL-Pro Suite software includes a TWAIN compliant
scanner driver. TWAIN drivers meet the standard universal protocol
for communicating between scanners and software applications.
This means that not only can you scan images directly into the
PaperPort® viewer that Brother included with your machine, but you
can also scan images directly into hundreds of other software
applications that support TWAIN scanning. These applications
include popular programs like Adobe® Photoshop®, Adobe®
PageMaker®, CorelDraw® and many more.
For Windows® XP
The machine uses Windows® Imaging Acquisition (WIA) for
scanning documents. (See Scanning a document (For
Windows® XP only) on page 2-11.)
HOW TO SCAN USING WINDOWS® 2 - 2
How to access the Scanner
1
Open the software application (ScanSoft® PaperPort®) to scan
a document.
The instructions for scanning in this Guide are for when you use
ScanSoft® PaperPort® 8.0SE.
2
3
Select Scan from the File drop-down menu or select the Scan
button. The Scan panel appears in the left panel.
Select Brother MFC-XXXX USB or Brother MFC-XXXX LAN
from the Scanner drop-down list box. (Where XXXX is your
model name.)
If the MFC is connected via:
USB-use Brother MFC-XXXX USB
LAN-use Brother MFC-XXXX LAN
(Where XXXX is your model name.)
4
Click Scan
The Scanner Setup dialog box will appear:
2 - 3 HOW TO SCAN USING WINDOWS®
Scanning a document into the PC
You can scan a whole page
—OR—
Scan a portion of the page after pre-scanning the document.
Scanning a whole page
1
2
Load your document.
Adjust the following settings, if required, in the Scanner window:
■ Image Type
■ Resolution
■ Scan Type
■ Brightness
■ Contrast
■ Document Size
After you select a document size, you can adjust the scanning
area further by clicking the left mouse button and dragging it.
This is required when you want to crop an image when
scanning.
3
See Settings in the Scanner window on page 2-7.
Click the Start button in the scanner window.
When scanning is completed, click Cancel to return to the
PaperPort® window.
HOW TO SCAN USING WINDOWS® 2 - 4
Pre-Scanning to crop a portion you want to scan
The PreScan button is used to preview an image for cropping any
unwanted areas from the image. When you are satisfied with the
preview, click the Start button in the scanner window to scan the
image.
1 Load your document.
Scanning area
2
3
Select the settings for Image Type, Resolution, Scan Type,
Brightness, Contrast and Document Size, as needed.
In the Scanner Setup dialog box, click the PreScan button.
The entire document will be scanned into the PC and will appear
in the Scanning Area.
Scanning area
2 - 5 HOW TO SCAN USING WINDOWS®
4
Select the portion you want to scan by clicking the left mouse
button and dragging it.
If you enlarge the image using
button, you can then use the
button to restore the image to its former size.
5
Load your document again.
If your model is flatbed type, and you load the document on the
scanner glass in step 1, please skip this step.
6
Click Start.
This time only the selected area of the document will appear in
the PaperPort® window (or your software application window).
7
In the PaperPort® window, use the options available to refine the
image.
HOW TO SCAN USING WINDOWS® 2 - 6
Settings in the Scanner window
Image Type
Select the image type of output from Photo, Web or Text.
Resolution and Scan Type will be altered for each default setting.
The default settings are:
Image Type
Resolution
Scan Type
Photo
Select for scanning photo images.
300 x 300 dpi
24-bit colour
Web
Select for attaching the scanned
image to web pages.
100 x 100 dpi
24-bit colour
Text
Select for scanning text
documents.
200 x 200 dpi
Black & White
Resolution
You can change the scanning resolution from the Resolution drop
down list. Higher resolutions take more memory and transfer time,
but can achieve a finer scanned image. The following table shows
the resolution you can choose and the available colours.
Resolution
Black & White /
Gray
(Error Diffusion)
256 colour
True Gray /
24 bit colour
100 x 100 dpi
Yes
Yes
Yes
150 x 150 dpi
Yes
Yes
Yes
200 x 200 dpi
Yes
Yes
Yes
300 x 300 dpi
Yes
Yes
Yes
400 x 400 dpi
Yes
Yes
Yes
600 x 600 dpi
Yes
Yes
Yes
1200 x 1200 dpi
Yes
No
Yes
2400 x 2400 dpi
Yes
No
Yes
4800 x 4800 dpi
(For MFC-3420C
and MFC-3820CN
Only)
Yes
No
Yes
9600 x 9600 dpi
(For MFC-3420C
and MFC-3820CN
Only)
Yes
No
Yes
2 - 7 HOW TO SCAN USING WINDOWS®
Scan Type
Black & White: Set the Scan Type to Black & White for text or line art.
Gray Scale:
Set the Scan Type to Gray (Error Diffusion) or
True Gray for photographic images.
Colours:
Set either:
256 Colour, which scans up to 256 colours, or 24
bit Colour which scans up to 16.8 million colours.
Although using 24 bit Colour creates an image
with the most accurate colours, the image file will
be approximately three times larger than a file
created with 256 Colour.
Brightness
Adjust this settings (-50 to 50) to obtain the best image. The default
value is 0, representing an ‘average’.
You can set the level by dragging the slide bar to the right or left to
lighten or darken the image. You can also type a value in the box for
the setting.
If the scanned image is too light, set a lower brightness value and
scan the document again. If the image is too dark, set a higher
brightness value and scan the document again.
It is only available when Black & White or Grey is selected.
Contrast
This setting is adjustable only when you have selected one of the
gray scale settings. It is not available when Black & White and
Colour settings are selected as the Scan Type.
You can increase or decrease the contrast level by moving the slide
bar to the left or right. An increase emphasizes dark and light areas
of the Image, while a decrease reveals more detail in gray areas. You
can also type a value in the box for the setting.
HOW TO SCAN USING WINDOWS® 2 - 8
Document Size
Set the Size to one of the following:
■ Letter (8 1/2 x 11 in.)
■ A4 (210 x 297 mm)
■ Legal (8 1/2 x 14 in.)
■ A5 (148 x 210 mm)
■ B5 (182 x 257 mm)
■ Executive (7 1/4 x 10 1/2 in.)
■ Business Card (90 x 60 mm)
(For MFC-3420C and MFC-3820CN Only)
■ Photo 3.5 x 5 in. (9 x 13 cm)
■ Photo 5 x 7 in. (13 x 18 cm)
■ APS C 4 x 6 in. (10 x 15 cm)
■ Custom (User adjustable from 0.35 x 0.35 in. to 8.5 x 14 in or
8.9 x 8.9 mm to 215.9 x 355.6 mm.)
If your machine is flatbed type (MFC-3420C or MFC-3820CN), you
can scan business cards. To scan business cards, select the
document size, and then place the document face down at the center
of scanner glass.
When scanning photographs or other images for use in a word processor
or other graphics application. You should try different settings for the
contrast and resolution modes to see which best suits your needs.
2 - 9 HOW TO SCAN USING WINDOWS®
If you selected Custom as the size, The Custom Document Size
dialog box will appear.
Type the Name, Width and Height for the document.
You can choose “mm” or “inch” as the unit for Width and Height.
You can see the actual paper size you selected on the screen.
■ Width: shows the width of scanning area
■ Height: shows the height of scanning area
■ Data Size: shows the approximate data size calculated in a
Bitmap format. The size will be different for other file formats such
as JPEG.
HOW TO SCAN USING WINDOWS® 2 - 10
Scanning a document
(For Windows® XP only)
WIA compliant
Windows® XP uses Windows® Image Acquisition (WIA) for scanning
images from the machine. You can scan images directly into the
PaperPort® viewer that Brother included with your machine or you
can scan images directly into any other software application that
supports WIA or TWAIN scanning.
How to access the scanner
1
Open your software application to scan a document.
The instructions for scanning in this Guide are for when you use
ScanSoft® PaperPort® 8.0. The steps for scanning from another
application may vary.
2
3
4
Select Scan from the File drop-down menu or select the Scan
button.
The Scan panel appears in the left panel.
Select the scanner you are using from the Scanner drop-down
list box.
Click Scan.
The Scan dialog box will appear:
2 - 11 HOW TO SCAN USING WINDOWS®
Scanning a document into the PC
(MFC-3220C and MFC-3320CN only)
1
Load your document.
A
B
C
D
2
3
4
Select the picture type (B).
Select the Paper size from the drop-down list box (D).
If you require advanced settings, click on the tab Adjust the
quality of the scanned picture (C). You can select
Brightness, Contrast, Resolution and Picture Type from the
Advanced Properties. Click the OK button after you choose
your settings.
5
To start scanning your document, click the Scan button in the
Scan dialog box.
HOW TO SCAN USING WINDOWS® 2 - 12
■ The scanner resolution you can select is up to 1200 × 1200
dpi.
■ For resolutions greater than 1200dpi, use the Brother
Scanner Utility. (See Brother Scanner Utility on page 2-18.)
■ You cannot select the Paper source (A) other than
Document Feeder.
2 - 13 HOW TO SCAN USING WINDOWS®
Scanning a document into the PC
(MFC-3420C and MFC-3820CN only)
There are two ways in which you can scan a whole page. You can
either use the ADF (automatic document feeder) or the Flatbed
scanner glass.
If you would like to scan and then crop a portion of the page after
pre-scanning the document, you will need to use the scanner glass
(Flatbed). (See Pre-Scanning to crop a portion you want to scan on
page 2-5.)
Scanning a document using the ADF
1
Load your document.
A
B
C
D
2
3
4
Select the Document Feeder from the Paper source
drop-down list box (A).
Select the picture type (B).
Select the Paper size from the drop-down list box (D).
HOW TO SCAN USING WINDOWS® 2 - 14
5
If you require advanced settings, click on the tab Adjust the
quality of the scanned picture (C). You can select
Brightness, Contrast, Resolution and Picture Type from the
Advanced Properties. Click the OK button after you choose
your settings.
■ The scanner resolution you can select is up to 1200 × 1200
dpi.
■ For resolutions greater than 1200dpi, use the Brother
Scanner Utility. (See Brother Scanner Utility on page 2-18.)
6
To start scanning your document, click the Scan button in the
Scan dialog box.
2 - 15 HOW TO SCAN USING WINDOWS®
Pre-Scanning to crop a portion you want to scan using the
scanner glass (MFC-3420C and MFC-3820CN only)
The Preview button is used to preview an image for cropping any
unwanted portions from the image. When you are satisfied with the
preview, click the Scan button from the scanner window to scan the
image.
1 Place the document face down on the scanner glass.
2 Make sure you selected Flatbed in the Paper source pull-down
box (A).
A
Scanning area
B
3
4
5
Select the picture type (B).
In the Scan dialog box, click the Preview button. The entire
document will be scanned into the PC and will appear in the
scanning area.
Select the portion you want to scan by clicking the left mouse
button and dragging it over the area.
Scanning area
HOW TO SCAN USING WINDOWS® 2 - 16
6
If you require advanced settings, click Picture Type from the
Adjust the quality of the scanned picture (C). You can select
Brightness, Contrast, Resolution and Picture Type from the
Advanced Properties. Click the OK button after you choose
your settings.
C
7
To start scanning your document, click the Scan button in the
Scan dialog box.
This time only the selected area of the document will appear in
the PaperPort® window (or your software application window).
2 - 17 HOW TO SCAN USING WINDOWS®
Brother Scanner Utility
The Brother Scanner Utility is used for configuring the scanner driver
for resolutions greater than 1200dpi and for changing the paper size.
If you want to set Legal size as the default size, change the setting
using this utility. You must restart your PC for the new settings to take
effect.
You can change the paper size setting with MFC-3420C and
MFC-3820CN only.
To run the utility:
You can run the utility by selecting the Scanner Utility located in the
Start/All Programs/Brother/MFL-Pro Suite MFC-XXXXC menu.
(Where XXXX is your model name.)
If you scan the document at resolution of greater than 1200dpi,
the file size maybe very large. Please make sure that you have
sufficient memory and hard disk space for the size of the file you
are trying to scan. If the memory and hard disk is not sufficient
then your computer may freeze and you could lose your file.
HOW TO SCAN USING WINDOWS® 2 - 18
Using the Scan key
(For USB cable users)
You can use
(Scan) on the control panel to scan documents
into your word processing, graphics or E-mail applications or your
(Scan) is that you
computer folder. The advantage of using
avoid the mouse clicks required to scan from your computer.
If you are using a Macintosh® computer the
(Scan) key
will work only for Scan to Card. (For MFC-3220CN and
MFC-3820CN Only.)
Before you can use
(Scan) on the control panel, you
must have connected the machine to your Windows® based
computer and loaded the appropriate Brother Drivers for your
version of Windows®.
When you are ready to use
(Scan), make sure the
Brother Control Center application is running on your computer.
For details about how to configure the Brother Control Center
buttons to launch the application of your choice using
(Scan), go to the appropriate chapter:
■ For Windows® 98/98SE/Me and 2000 Professional, see
Using the Brother Control Center on page 3-1.
■ For Windows® XP, see Using the Windows® XP-Based
Brother SmartUI Control Center on page 4-1.
2 - 19 HOW TO SCAN USING WINDOWS®
Scan to E-mail
You can either scan a black and white or colour document into your
E-mail application as a file attachment. You can change the
(Scan) configuration. (See Scan to E-mail on page 3-10 to 3-11.)
(For Windows® XP: See Hardware Section: Changing the Scan to
button configuration on page 4-5 to 4-11.)
1 Load your document.
2
3
Press
Scan to E-mail
(Scan).
Press
or
to select Scan to E-Mail.
Press Mono Start or Colour Start.
The machine will scan the document, create a file attachment,
and launch your E-mail application, displaying the new message
waiting to be addressed.
Scan to Image
You can scan a colour picture into your graphics application for
viewing and editing. You can change the
(Scan)
configuration. (See Scan to Image on page 3-14.) (For Windows®
XP: See Hardware Section: Changing the Scan to button
configuration on page 4-5 to 4-11.)
1 Load your document.
2
3
Press
(Scan).
Scan to Image
Press
or
to select Scan to Image.
Press Mono Start or Colour Start.
The machine will start the scanning process.
HOW TO SCAN USING WINDOWS® 2 - 20
Scan to OCR
If your document is text, you can have it converted by ScanSoft®
TextBridge® to an editable text file and then have the result displayed
in your word processing application for viewing and editing. You can
change the
(Scan) configuration. (See Scan to OCR (Word
Processor) on page 3-12 to 3-13.) (For Windows® XP: See Hardware
Section: Changing the Scan to button configuration on page 4-5 to
4-11.)
1 Load your document.
2
3
Press
(Scan).
Scan to OCR
Press
or
to select Scan to OCR.
Press Mono Start or Colour Start.
The machine will start the scanning process.
Scan to File
You can scan a black and white or a colour document into your
computer and save it as a file in the folder you choose. The file type
and specific folder are based on the settings you have chosen in the
Scan to File screen of the Brother MFL-Pro Control Center. (See
Scan to File on page 3-8 to 3-9.) (For Windows® XP: See Hardware
Section: Changing the Scan to button configuration on page 4-5 to
4-11.)
1 Load your document.
2
3
Press
(Scan).
Scan to File
Press
or
to select Scan to File.
Press Mono Start or Colour Start.
The machine will start the scanning process.
2 - 21 HOW TO SCAN USING WINDOWS®
Scan to Card
(MFC-3320CN and MFC-3820CN only)
You can scan black and white and colour originals into a media card.
Black and white originals will be stored in PDF (*.PDF) or TIFF file
formats (*.TIF). Colour originals may be stored in PDF (*.PDF) or
JPEG (*.JPG) file formats. The default setting is Color 150 dpi
and the default file format is PDF. File names default to the current
date. For example, the fifth image scanned on July 1, 2002 would be
named 07010205.PDF. You can change the colour, quality and file
name as you want.
Quality
Selectable File Format
Default File Format
B/W 200x100 dpi
TIFF / PDF
TIFF
B/W 200 dpi
TIFF / PDF
TIFF
Color 150 dpi
JPEG / PDF
PDF
Color 300 dpi
JPEG / PDF
PDF
Color 600 dpi
JPEG / PDF
PDF
You can choose the default file format for Black & White or
colour files. (See Changing the default colour file format on page
2-23 and Changing the default Black & White file format on page
2-23.)
1
Insert a SmartMedia®, CompactFlash®, Memory Stick® or
SecureDigital card into your machine.
Do not take out the media card while PhotoCapture is blinking
to keep from damaging the card or data stored on the card.
2
3
4
Load your document.
Press
(Scan).
Press
or
to select Scan to Card.
To change quality, press Menu/Set and go to Step 5.
—OR—
Press Mono Start or Colour Start to start scanning without
Changing any settings.
Press
or
to select the quality you want.
To change the file type, press Menu/Set and go to Step 6.
—OR—
To start scanning, press Mono Start or Colour Start.
5
HOW TO SCAN USING WINDOWS® 2 - 22
6
7
Press
or
to select the file type you want.
To change the file name, press Menu/Set and go to Step 7.
—OR—
To start scanning, press Mono Start or Colour Start.
File name is automatically changed, but you can use the dial
pad to enter the file name. (You can only change the first 6
digits.)
Press Mono Start or Colour Start to start scanning.
Changing the default quality
1 Press Menu/Set, 4, 7, 1.
2
3
1.Quality
Press
or
to select
B/W 200x100 dpi, B/W 200 dpi, Color 150 dpi,
Color 300 dpi or Color 600 dpi.
Press Menu/Set.
Press Stop/Exit.
Changing the default Black & White file format
1 Press Menu/Set, 4, 7, 2.
2.B/W File Type
2
3
Press
or
to select TIFF
or PDF.
Press Menu/Set.
Press Stop/Exit.
Changing the default colour file format
1 Press Menu/Set, 4, 7, 3.
3.ColorFile Type
2
3
Press
or
to select PDF or
JPEG.
Press Menu/Set.
Press Stop/Exit.
2 - 23 HOW TO SCAN USING WINDOWS®
Using ScanSoft® PaperPort® and
TextBridge® OCR
ScanSoft® PaperPort® for Brother is a document management
application. You will use PaperPort® to view scanned documents.
PaperPort® has a sophisticated, yet easy-to-use, filing system that
will help you organize your graphics and text documents. It allows
you to combine or “stack” documents of different formats for printing,
faxing or filing.
ScanSoft® PaperPort® can be accessed through the ScanSoft®
PaperPort® program group.
See Documentation for ScanSoft® PaperPort® on the CD-ROM.
The complete ScanSoft® PaperPort® Users Guide, including
ScanSoft® TextBridge® OCR, is in the Documentation on the
CD-ROM.
This chapter is only an introduction to the basic operations.
When you install MFL-Pro Suite, ScanSoft® PaperPort® for Brother
and ScanSoft® TextBridge® OCR are installed automatically.
If you are using Windows® XP or Windows® 2000 Professional,
we recommend that you are logged on with administrator rights.
HOW TO SCAN USING WINDOWS® 2 - 24
Viewing items
ScanSoft® PaperPort® provides several ways to view items:
Desktop View displays a thumbnail (a small graphic that represents
each item in a Desktop or folder).
Items in the selected folder appear on the PaperPort® Desktop. You
can see PaperPort® items (MAX files) and non-PaperPort® items
(files created using other applications).
Non-PaperPort® items include an icon that indicates the application
that was used to create the item; a non-PaperPort® item is represented
by a small rectangular thumbnail and not an actual image.
Desktop View displays items
as thumbnails
Page View displays a close-up of a single page and you can open a
PaperPort® item by double-clicking on it.
As long as you have the appropriate application on your computer to
display it, you can also double-click a non-PaperPort® item to open it.
Page View displays each item
as a full page
2 - 25 HOW TO SCAN USING WINDOWS®
Organizing your items in folders
PaperPort® has an easy-to-use filing system for organizing your
items. The filing system consists of folders and items that you select
to view in Desktop View. An item can be a PaperPort® item or a
non-PaperPort® item:
■ Folders are arranged in a “tree” structure in the Folder View.
You use this section to select folders and view their items in
Desktop View.
■ You can simply drag and drop an item onto a folder.
When the folder is highlighted, release the mouse button and the
item is stored in that folder.
■ Folders can be “nested”—that is, stored in other folders.
■ When you double-click a folder, its items (both PaperPort® MAX
files and non PaperPort® files) appear on the Desktop.
■ You can also use Windows® Explorer to manage the folders and
items shown in Desktop View.
Quick links to other applications
ScanSoft® PaperPort® automatically recognizes many other
applications on your computer and creates a “working link” to them.
The Send To Bar at the bottom of the Desktop view shows icons of
those linked applications.
To use a link, drag an item onto one of the icons to start the
application represented by the icon. A typical use of the Send To Bar
is to select an item and then fax it.
This sample Send To Bar shows several applications with links to
PaperPort®.
If PaperPort® does not automatically recognize one of the
applications on your computer, you can manually create a link using
the Add to Send To Bar... command.
(See PaperPort® in the Documentation section on the CD-ROM for
more information about creating new links.)
HOW TO SCAN USING WINDOWS® 2 - 26
ScanSoft® TextBridge® OCR lets you convert
image text into text you can edit
ScanSoft® PaperPort® can quickly convert the text on a ScanSoft®
PaperPort® item (which is really just a picture of the text) into text that
you can edit with a word processing application.
PaperPort® uses the optical character recognition application
ScanSoft® TextBridge®, which comes with PaperPort®
—OR—
PaperPort® can use your prefered OCR application if it is already on
your computer. You can convert the entire item, or by using the Copy
Text command, you can select only a portion of the text to convert.
Dragging an item onto a word-processing link icon starts
PaperPort® ’s built-in OCR application, or you can use your own
OCR application.
You can Import items from other applications
In addition to scanning items, you can bring items into PaperPort® in
a variety of ways and convert them to PaperPort® (MAX) files in
several different ways:
■ Print to the Desktop View from another application, such as
Microsoft® Excel.
■ Import files saved in other file formats, such as Windows® Bitmap
(BMP) or Tag Image File Format (TIFF).
2 - 27 HOW TO SCAN USING WINDOWS®
You can Export items in other formats
You can export or save PaperPort® items in several popular file
formats, such as BMP, JPEG, TIFF, or self-viewing.
For example, to create a file for an Internet Web site, export it as a
JPEG file. Web pages often use JPEG files for displaying images.
Exporting an image file
1
2
3
4
Select the Save As command from the File pull-down menu in
the PaperPort® window. The Save ‘XXXXX’ as dialog box will be
displayed.
Select the drive and directory where you want to store the file.
Enter the new file name and choose the file type or select a
name from the File Name text box. (You can scroll through the
Directories and File Name listing for prompting.)
Select the Save button to save your file, or Cancel to return to
the PaperPort® without saving it.
How to Uninstall PaperPort® and ScanSoft®
TextBridge®
For Windows® 98/98SE and Windows® Me:
Select Start, Settings, Control Panel, Add/Remove Programs
and the Install/Uninstall tab.
Select Brother Extensions for Paperport® and click the
Add/Remove button.
Select PaperPort® 8.0 SE from the list and click the Add/Remove button.
For Windows® 2000 Professional:
Select Start, Settings, Control Panel and Add/Remove Programs.
Select Brother Extensions for Paperport® and click the
Change/Remove button.
Select PaperPort® 8.0 SE from the list and click the Change button.
For Windows® XP:
Select Start, Control Panel, Add or Remove Programs and the
Change or Remove Programs icon.
Select PaperPort® 8.0 SE from the list and click the Change button.
HOW TO SCAN USING WINDOWS® 2 - 28
3
Using the Brother Control
Center
(For Windows® 98/98SE/Me and 2000 Professional)
If you are using Windows® 2000 Professional, we recommend
that you are logged on with administrator rights.
Brother MFL-Pro Control Center
The Brother Control Center is a software utility that pops up on the
PC screen whenever paper is put in the ADF of the machine. This
allows you to quickly and with very few mouse clicks, access the
most frequently used scanning applications. Using the Control
Center stops the need to manually startup any specific applications.
The Brother Control Center provides three operations (Scan, Copy
and PC-Fax):
■ Scan directly to a file, E-mail, word processor or graphic
application of your choice
■ Copy
■ PC Faxing using the Brother PC-FAX software
The Brother Control Center pops up on the screen when using
the USB connection, not the LAN connection.
3 - 1 USING THE BROTHER CONTROL CENTER
AutoLoad the Brother Control Center
The Control Center is loaded every time Windows® is started.
When the Control Center is loaded, the Control Center
icon will appear on the task bar.
If you don’t want the Control Center to load automatically, you can
turn off AutoLoad.
If the Control Center
icon does not appear on
your task bar, you will have to launch the software.
Double-click the Control Center
icon on the desktop or
from the Start menu, select Programs, ScanSoft® PaperPort®
8.0, and then click Brother SmartUI POPUP.
How to turn off AutoLoad
1
2
Left-click the Control Center
icon and click
Show.
When the Control Center window appears, left click the
Configuration
Control Center button.
A dialog box will appear:
3
Uncheck the ‘AutoLoad’ Pop-Up check box.
USING THE BROTHER CONTROL CENTER 3 - 2
Brother Control Center features
Auto Configuration
During installation the Control Center will check your system to set
up the default applications for E-mail, word processing and the
graphics viewer/editor.
For example, if you are using Outlook as your default E-mail
application, the Control Center will create a link and a scanning
application button for Outlook.
You can change a default application. Right-click the appropriate
Control Center button to display Configurations and then click it.
Select a different application.
For example, you can change a scan button from MS Word Pad
to MS Word
that is listed for the Word Processor.
by changing the application
3 - 3 USING THE BROTHER CONTROL CENTER
Scan to operations
Scan to File—Allows you to scan directly to a file on your computer.
You can change the file type and directory for the document you are
scanning.
Scan to E-mail—Allows you to scan a picture or text document
directly into an E-mail application as a standard attachment. You can
choose the file type and resolution for the attachment.
Scan to OCR (Word Processor)—Allows you to scan a text
document , run ScanSoft® TextBridge® OCR, and insert the text
document (not a graphic image) into a word processing file. You can
choose the word processing application, such as Word Pad, MS
Word, and so on.
Scan to Image—Allows you to scan an image directly into any
graphic viewer/editor application. You can choose the graphics
application, such as Microsoft Paint.
Copy operations
Copy—Allows you use the PC and any Windows® printer driver for
enhanced copy operations.
You can scan the page on the Brother machine and print the copies
using any of the features of the Brother machine printer driver.
—OR—
You can send the copy output to any standard Windows® printer
driver that is on your PC.
PC-Fax operation
Send a Fax—Allows you scan a picture or text document and send
the image as a fax from the PC using the Brother PC-FAX software.
USING THE BROTHER CONTROL CENTER 3 - 4
Scanner settings for Scan, Copy and PC-Fax buttons
When the Pop-Up screen appears, you can access the Scanner
Settings window.
Click the Configuration
Control Center icon at the top right
of the Brother Control Center screen
—OR—
Click the Modify Settings button on any of the Configuration screens.
Global settings
AutoLoad Pop-Up—Select this checkbox if you want Brother MFL
Control Center to load when you turn on your computer.
3 - 5 USING THE BROTHER CONTROL CENTER
Setting up the scanner configurations
The Pop-Up application stores eight different scanning modes. Each
time you scan a document, you can choose the most appropriate
scanning mode from the following:
Faxing, Filing and Copying
Text for OCR
Photos
Photos (High Quality)
Photos (Quick Scan)
Custom
Draft Copy
Fine Copy
Each mode has its own set of stored settings. You can keep the
factory default settings or change them at any time:
Resolution—From the pull-down list, select the scanning
resolution you most often use.
Colour Mode—From the pull-down list, select the colour settings
you most often use.
Scan Size—From the pull-down list, select the scan size you
most often use.
Brightness—Slide the adjuster from 0% to 100%
Contrast—Slide the adjuster from 0% to 100%
Click OK to save your changes. If you make a mistake or want the
original default setting, just click the Restore Defaults button when
the scanning mode is displayed.
USING THE BROTHER CONTROL CENTER 3 - 6
Performing an operation from the Control Center
screen
If you see this screen it means you left-clicked a button in the Control
Center window without first placing a document in the ADF.
Place the document in the machine’s ADF, and then click OK to go
to the Control Center screen.
If your machine is flatbed model (MFC-3420C or MFC-3820CN),
and want to scan the document from the scanner glass, please
use
(Scan) on the control panel of the machine.
3 - 7 USING THE BROTHER CONTROL CENTER
Scan to File
To access Scan to File Configurations screen
1
2
3
Load your document in the ADF. The Brother Control Center
screen will pop up.
Right-click Scan to File and click on Configuration. Click the
Modify Settings button to view the configuration screen of the
Control Center.
To save your settings, click OK.
—OR—
To go back to the factory default settings, click the Restore
Defaults button.
Scanner settings
From the pull-down list, select the scanning mode that is appropriate
for the type of file: Faxing, Filing and Copying; Text for OCR;
Photos; Photos (High Quality); Photos (Quick Scan); Custom;
Draft Copy or Fine Copy.
To change any of the settings for the mode, click Modify Settings.
USING THE BROTHER CONTROL CENTER 3 - 8
Destination folder
PaperPort® Folder—Select this checkbox to scan the document into
your PaperPort® folder.
Other Folder—Select this checkbox, to scan the document as
another file type or to store it in another directory/folder.
File—If you selected Other folder from the pull-down list, select the
type of file:
PaperPort® Image Item (*.max)
PaperPort® Self-Viewing (*.exe)
PaperPort® Browser-Viewable (*.htm)
PaperPort® 5.0 Image Item (*.max)
PaperPort® 4.0 Image Item (*.max)
PaperPort® 3.0 Image Item (*.max)
Windows Bitmap (*bmp)
PC Paintbrush (*.pcx)
PCX Multi-page (*.dcx)
JPEG (*.jpg)
TIFF-Uncompressed (*.tif)
TIFF-Group 4 (*.tif)
TIFF-Class F (*.tif)
TIFF Multi-page - Uncompressed (*.tif)
TIFF Multi-page - Group 4 (*.tif)
TIFF Multi-page - Class F (*.tif)
Portable Network Graphics (*.png)
FlashPix (*.fpx)
To Search your system for the directory and folder you want, click the
Browse button. Click OK to save your settings.
3 - 9 USING THE BROTHER CONTROL CENTER
Scan to E-mail
To access Scan to E-mail Configurations screen
1
2
3
Load your document in the ADF. The Brother Control Center
screen will pop up.
Right-click the E-mail application button and click on
Configuration. Click the Modify Settings button to view the
configuration screen of the Control Center.
To save your settings, click OK.
—OR—
To go back to the factory default settings, click the Restore
Defaults button.
Scanner settings
From the pull-down list, select the scanning mode that is appropriate
for the type of file: Faxing, Filing and Copying; Text for OCR;
Photos; Photos (High Quality); Photos (Quick Scan); Custom;
Draft Copy or Fine Copy.
To change any of the settings for this mode, click Modify Settings.
USING THE BROTHER CONTROL CENTER 3 - 10
E-mail application
E-mail Application—From the pull-down list, select your E-mail
application.
E-mail Settings—Click the E-Mail Settings button to set up links.
The Send To Options window will appear:
Send to Options
Convert attachments to specified file type—Converts items to the
type in the File type box. Clear this check box to keep files in their
source format; for example, to keep Word documents in the .doc
format and JPEG images in the .jpg format.
All documents and image items—Converts all items regardless of
the program in which the item was created; for example, converts all
Word (.doc) files and JPEG (.jpg) files to the file type.
PaperPort® image items (MAX) only—Converts only PaperPort®
image items (.max) files. PaperPort® does not convert other file
types, such as JPEG images and Word documents.
File type—Identifies the format in which to convert items; for
example, JPEG or TIFF.
Combine items into single file, if possible—Combines all selected
items into a single file that contains multiple pages. This option is
available only when the file type supports multiple pages, such as
multi-page TIFF.
3 - 11 USING THE BROTHER CONTROL CENTER
Scan to OCR (Word Processor)
To access Scan to OCR Configurations screen
1
2
3
Load your document in the ADF. The Brother Control Center
screen will pop up.
Right-click the word processor application button and click on
Configuration. Click the Modify Settings button to view the
configuration screen of the Control Center.
To save your settings, click OK.
—OR—
To go back to the factory default settings, click the Restore
Defaults button.
Scanner settings
From the pull-down list, select the scanning mode that is appropriate
for the type of file: Faxing, Filing and Copying; Text for OCR;
Photos; Photos (High Quality); Photos (Quick Scan); Custom;
Draft Copy or Fine Copy.
To change any of the settings for this mode, click Modify Settings.
USING THE BROTHER CONTROL CENTER 3 - 12
Word Processor
Word Processor—From the pull-down list, select the word processor
you want to use.
Click the Link Settings button to display the screen to set up the
document format you want to use and identify the OCR program:
File type—From the pull-down list, select the file type you want to use
for your word processor or text documents.
OCR—Identify the OCR program to use to convert scanned
document images to editable documents. This option is available
only when you have an OCR program other than the one provided
with PaperPort®. (PaperPort® 8.0 SE uses the same OCR engine
that is in ScanSoft®'s TextBridge® Pro Millennium product.)
Click the Settings button to choose how the OCR application will
read the pages that you scan into your word processor application.
The OCR Settings window will appear:
Select your setting and click OK.
■ Auto orient page—Click this checkbox to automatically rotate
pages so that the text is upright.
■ Single column output—Click this checkbox if you want to remove
columns from multi-column documents so that converted text
appears in a one-column format.
3 - 13 USING THE BROTHER CONTROL CENTER
Scan to Image
To access Scan to Image Configurations screen
1
2
3
Load your document in the ADF. The Brother Control Center
screen will pop up.
Right-click the graphic application button and click on
Configuration. Click the Modify Settings button to view the
configuration screen of the Control Center.
To save your settings, click OK.
—OR—
To go back to the factory default settings, click the Restore
Defaults button.
USING THE BROTHER CONTROL CENTER 3 - 14
Scanner settings
From the pull-down list, select the scanning mode that is appropriate
for the type of file: Faxing, Filing and Copying; Text for OCR;
Photos; Photos (High Quality); Photos (Quick Scan); Custom;
Draft Copy or Fine Copy.
To change any of the settings for this mode, click Modify Settings.
Target Application
Application—From the pull-down list, select the application you want
to add to this Pop-Up screen.
Click the Custom Link Settings button to set up links for your
user-defined application.
3 - 15 USING THE BROTHER CONTROL CENTER
Copy
To access the Copy Configurations screen
1
2
3
Load your document in the ADF. The Brother Control Center
screen will pop up.
Right-click the Copy and click on Configuration. Click the
Modify Settings button to view the configuration screen of the
Control Center.
To save your settings, click OK.
—OR—
To go back to the factory default settings, click the Restore
Defaults button.
USING THE BROTHER CONTROL CENTER 3 - 16
Scanner settings
From the pull-down list, select the scanning mode that is appropriate
for the type of file: Draft Copy or Fine Copy.
To change any of the settings for this mode, click Modify Settings.
Number of copies
Copies—Enter the number of copies you want to print.
To change the copy options, click the Copy Options button.
Click OK to save your Copy settings.
3 - 17 USING THE BROTHER CONTROL CENTER
Send a fax
To access the Send a fax Configurations screen
1
2
3
Load your document in the ADF. The Brother Control Center
screen will pop up.
Right-click the Send a fax and click on Configuration. Click the
Modify Settings button to view the configuration screen of the
Control Center.
To save your settings, click OK.
—OR—
To go back to the factory default settings, click the Restore
Defaults button.
Scanner settings
From the pull-down list, select the scanning mode that is appropriate
for the type of file: Faxing, Filing and Copying; Text for OCR;
Photos; Photos (High Quality); Photos (Quick Scan); Custom;
Draft Copy or Fine Copy.
To change any of the settings for this mode, click Modify Settings.
USING THE BROTHER CONTROL CENTER 3 - 18
PC-FAX settings
Brother PC-Fax
FAX Resolution—Fine (200 × 200)
1 To change the fax options, click the FAX Options button.
The Brother PC-FAX Properties screen appears:
For Windows® 98/98SE and Me
For Windows® 2000 Professional and XP
2
Select the Paper Size and Orientation (Portrait or Landscape)
and click OK.
To go back to the factory default settings, click the Restore
Defaults or Default button.
3 - 19 USING THE BROTHER CONTROL CENTER
4
Using the Windows® XP-Based
Brother SmartUI Control Center
(For Windows® XP)
For Windows® 98/98SE/Me and 2000 Professional
See Using the Brother Control Center on page 3-1
Brother SmartUI Control Center
The Brother Control Center is a software utility that allows you to
quite easily, with very few mouse clicks, access the most frequently
used scanning applications. Using the Control Center eliminates the
need to manually launch the specific applications and allows you to
scan a document directly to a folder on your computer. The Brother
Control Center provides four categories of operations:
1 Scan directly to a file, E-mail, word processor or graphics
application of your choice.
2 Enhanced copy functions, such as Four/Two or One-on-One
Copying.
3 PC Faxing using the Brother PC-Fax software.
4 Custom buttons allow you to configure a button to meet your
own application requirements.
In the Task Tray right-click on the Control Center
icon and select
Show to have access to the Brother SmartUI Control Center window.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 1
AutoLoad the Brother Control Center
The Control Center is initially configured to automatically load each
time Windows® is started. When the Control Center is loaded the
Control Center
icon will appear in the task bar. If you
don’t want the Control Center to load automatically, you can turn
AutoLoad off.
How to turn off Auto Load
1
2
3
Right-click the Control Center
icon in the Task
Tray and select Show.
The main SmartUI Control Center window appears. Please look
at the bottom of the window for a check box labelled “AutoLoad
Pop-up”.
Uncheck the AutoLoad Pop-Up option to prevent the SmartUI
from automatically loading every time Windows® is started.
4 - 2 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Brother Control Center features
The SmartUI control center gives you the ability to configure the
hardware Scan key on your machine such as “Scan to File”. The
“Scan to File” feature allows you to scan a document directly to your
hard disk and choose the file format and destination folder without
having to run any other applications. Select which section you want
by clicking on the appropriate tab.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 3
Auto Configuration
During the installation process the Control Center checks your
system to determine the default applications for E-mail, word
processing and graphics viewer/editor.
For example, if you are using Outlook as your default E-mail
application, the Control Center automatically will create a link and a
scanning application button for Outlook.
You can change the default application by right-clicking on any of the
scan buttons in the Control Center and then clicking Configuration.
Select the Configuration tab and from the Application pull down
menu select a different application. For example, you can change the
E-mail scan button from Outlook Express to Outlook by changing the
application that is listed.
4 - 4 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Hardware Section: Changing the Scan
to button configuration
When the SmartUI Control Center is displayed, you can access the
Hardware Section window to reconfigure the
(Scan) button
on your machine. Click the Hardware Section tab at the top left of the
SmartUI Control Center screen. (See Using the Scan key (For USB
cable users) on page 2-19.)
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 5
Scan to E-mail
To configure the Scan to E-mail feature left-click on the Scan to
E-mail button and the following screen will appear. You have the
ability to change the configuration that includes the destination
E-mail application, attachment file and the scanner settings.
To change the destination E-mail application you use the Application
pull down list to select the compatible E-mail application, which is
installed on your system.
If you wish to change the attachment file type click on the Link
Preferences button to display a list of file types.
4 - 6 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Scan to File
To configure the Scan to File feature, left click on the Scan to File
button and the following screen will appear.
Select the file type for the saved image by selecting from the Format
pull down list. You can save the file to the default PaperPort® folder
so the file appears in PaperPort® or you can select another
folder/directory by clicking the Browse button.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 7
Scan to Image
To configure the Scan to Image feature left-click on the Scan to
Image button and the following screen will appear. You have the
ability to change the configuration, which includes the destination
image format or document application.
4 - 8 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
To change the default setting of the scan, click on the Scan Settings
tab.
You can set the Colour Mode to Black & White, 8-bit Gray or 24-bit
Colour.
The resolution can be changed from 100 to 1200 dpi. You can define
the size of the paper you’re using, and you can adjust the brightness
and contrast of the image before scanning.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 9
Scan to OCR
To configure the Scan to OCR feature left-click on the Scan to OCR
button and the following screen will appear. You have the ability to
change the configuration, which includes the destination
applications.
4 - 10 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
You have the option to send your scan as a different file type. You
can select the application from the File Type window according to
your needs.
You have the option to choose your OCR setting from Single
column output to Auto orient page.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 11
Software Section
The Software Section contains four groups of scan to buttons. Each
section has a number of different buttons which are predefined for
the most frequently used applications. The Scan section contains
four buttons for Scan to File, Scan to E-mail, Scan to Word Processor
and Scan to Image applications. The Copy section contains three
buttons for N to 1 copying. The Fax section button is for sending
faxes using the Brother PC-FAX application and the Custom section
contains three buttons with which you can assign your own function.
*1
*2
*3
*4
4 - 12 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Scan
*1 Scan to File —enables you to scan directly to a disk file. You can
change the file type and destination directory, as needed.
*2 Scan to E-mail (Default: Outlook Express) —enables you to scan
a page or document directly into an E-mail application as a standard
attachment. You have the option of selecting the file type and
resolution for the attachment.
*3 Scan to Word Processor (Default: MS WordPad) —enables you to
scan a page or document , automatically run ScanSoft® TextBridge®
OCR and insert the text (not graphic image) into a word processing
program. You have the option of selecting the destination word
processing program, such as WordPad, MS Word, Word Perfect or
whichever word processing program is installed on your computer.
*4 Scan to Graphic Application (Default: MS Paint) —enables you to
scan a page directly into any graphic viewer/editor application. You
can select the destination application, such as MS Paint, Corel
PhotoPaint, Adobe PhotoShop, or any kind of image editor
application you already have installed on your computer.
Copy
Copy (Copy one to one)—allows you to use the PC and any
Windows® printer driver for enhanced copy operations. You can scan
the page on the machine and print the copies using any of the
features of the machine printer driver—OR—you can direct the copy
output to any standard Windows® printer driver installed on the PC
including network printers.
Four/Two to One Copy—enables you to use the Four/Two on
One-page features of the Brother printer driver to copy four/two
document pages onto a single output page.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 13
Fax
Send a Fax (Brother PC-FAX)—enables you to scan a page or
document and automatically send the image as a fax from the PC
using the Brother PC-FAX software.
Custom
Scan to File—These buttons have been pre-programmed for the
Scan to File feature. You can change the configuration of each of
these buttons to meet your specific requirements by right-clicking on
a button and following the configuration menus.
4 - 14 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Scan to File
The Scan to File button allows you to scan an image and save it in
a specific file type to any directory on your hard disk. This allows you
to easily archive your paper documents. To configure the file type
and save to directory right-click on the Scan to File button and click
Configuration.
The Scan Action tab is set to File and should not be changed.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 15
To change the configuration click on the Configuration tab.
Select the file type for the saved image by selecting from the Format
pull down list. You can save the file to the default PaperPort® folder
so the file appears in PaperPort®, or you can select another
folder/directory by clicking the Browse button.
You can change the default setting by selecting the Other Folder
button and then clicking Browse and selecting the folder in which
you wish to save your files.
4 - 16 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Scan to E-mail
The Scan To E-mail is automatically configured to your default E-mail
application. To change the default E-mail application or attachment
file type, right-click on the E-mail button and select “Configuration”.
The Scan Action tab is set to E-mail and should not be changed.
To change the E-mail application click on the Configuration tab. From
the Application pull down list, select your preferred E-mail
application.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 17
To change the file type of the attachment click the Link Preferences
button to set up links. Check the Convert attachments to specified
file type box and then select the appropriate file type from the pull
down list.
4 - 18 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
File attachments
Items are mailed as file attachments using the file type you have
selected.
Convert attachments to specified file type—Click this check box if
you want to change the file type of attachments.
All documents and image items—Click this check box if you want to
convert all scanned images to the same file type.
PaperPort® image items (MAX) only—Click this check box if you
want to convert only attachments that are PaperPort® MAX files.
Combine items into single file, if possible—Click this check box if you
want to combine all the attachments into one file. With this box
unchecked each scanned page will be saved in its own individual file.
File type—Select from the pull-down list the type of file you want the
scanned images to be saved in.
PaperPort® Image Item (*.max)
PaperPort® Browser-Viewable (*.htm)
PaperPort® Self Viewing (*.exe)
PaperPort® 5.0 Image Item (*.max)
PaperPort® 4.0 Image Item (*.max)
PaperPort® 3.0 Image Item (*.max)
Windows Bitmap (*.bmp)
PC Paintbrush (*.pcx)
PCX Multi-page (*.dcx)
JPEG (*.jpg)
TIFF-Uncompressed (*.tif)
TIFF Group 4 (*.tif)
TIFF Multi-Page -Uncompressed (*.tif)
TIFF Multi-Page - Group 4 (*.tif)
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 19
Scanner settings
You have the ability to change the scanner settings used to create
the file attachments. Click on the Scan Settings tab and select the
appropriate settings.
4 - 20 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Scan to OCR (Word Processing
program)
Scan to OCR converts the graphic page image data to text which can
be edited by any word processor program. You can change the
default word processor program (example: Word Pad instead of
Word) and file type. You can also choose another OCR software
package besides the TextBridge® OCR which is built into
PaperPort®.
To configure Scan to OCR right-click on the WordPad button and
select Configuration. The Scan Action tab is set to OCR and should
not be changed.
To change the word processing application click on the Configuration
Tab. You can select the destination word processing application from
the Application pull down list.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 21
To change the program link preferences click the Link Preferences
button.
File Type—From the pull-down list, select the file format you want to
use for documents.
OCR—Select the OCR application from the OCR pull down list.
4 - 22 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Scan to Graphics application
(example: Microsoft Paint)
The Scan to Graphics Application allows you to scan an image so
you can edit the image. To change the default graphics application
right-click on the button and select Configuration.
The Scan Action tab is set to Application and should not be changed.
To change the configuration of the destination application click on
the Configuration Tab.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 23
To change the destination application select the appropriate
application from the Application pull down list.
To change the other configuration options click the Link
Preferences button.
This option enables you to reduce image to screen resolution
(96dpi), show a warning if the item has annotations, update the
original item if sent item is modified, if needed.
4 - 24 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Copy
The copy buttons can be customized to allow you to take advantage
of the features built into the Brother printer drivers to do advanced
copy functions such as n-in-1 printing.
The Copy buttons are automatically linked to the default Windows®
printer driver. You can set any printer as the default printer including
non-Brother printers. Before you can use the Copy buttons you must
first configure the printer driver by right-clicking on a Copy button
and selecting Configuration.
In the Scan Settings window you can select the colour mode,
resolution, paper size, brightness and contrast settings to be used.
To finish the Copy button configuration you must set the printer
driver. Click the Copy options button to display the printer driver
settings.
The copy options screen will vary depending upon which
Brother model you purchased.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 25
(From MFC-3220C)
Select the number of Pages Per Sheet from the Scaling selections.
As an example to configure the section Copy button to copy two
pages to one you must select 2 in 1.
You must configure each of the copy buttons before they can be
used.
(From MFC-3220C)
4 - 26 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
PC Fax setting (PC-FAX using the
Brother Fax Driver)
The machine includes a PC-Fax driver, which allows any Windows®
Application to send a Fax as simply as printing a document. The
Brother SmartUI automatically configures the Fax button to use the
Brother PC-FAX driver no user configuration is required.
The Scan Action tab is set to Application and should not be changed.
To change the PC-FAX settings click the Link Preferences button,
found in the Configuration tab.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 27
FAX settings
Brother PC-FAX
To change the driver settings, click on the Setup button. Select the
Paper Size, Paper Source.
If you need more customized setup, click on the Options button.
Select the Paper Size, Orientation (Portrait or Landscape) and
Resolution (200x200 dpi or 200x100 dpi), and click OK.
To return to the factory default settings, click the Default button.
4 - 28 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
Custom: User-defined buttons
There are up to three Custom buttons on the Brother SmartUI
Control Center. You can set your own preferences and configuration
to fit your required application.
To configure a Custom button right click on the button and then click
Configuration. The configuration window will appear. You have four
function choices Application, File, OCR and E-mail.
Application: This setting will link the Control Panel button to any
button which appears on the PaperPort® Send to Bar. Please see the
PaperPort® help file for more information regarding PaperPort®
compatible applications.
File: This setting allows you to save a scanned image to any
directory on local or network hard disk. You can also select the file
format to be used.
OCR: Scanned documents will be converted to editable text files. If
you have a third party OCR software package installed on your PC
you can select it. The default OCR software is TextBridge® which is
built into PaperPort® 8.0 SE. You can also select the destination
word processor and file format for the editable text.
E-mail: Scanned images will be attached to an E-mail message.
You can choose which E-mail package to use if you have more than
one installed on your system. You can also select the file type for the
attachment and create a quick send list of E-mail addresses chosen
from your default E-mail address book.
Customizing a user-defined button
To configure a Custom button right-click on the button and then click
Configuration. Please follow the following guide lines for Custom
button configuration.
1. Select the Scan Action
Select the type of scan by clicking the appropriate button.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 29
2. Select Configuration for the Scan Type.
To configure the scan operation click on the Configuration Tab.
Depending upon which Scan Type button you selected you will see
a different Configuration Tab list of settings.
Application:
Select the destination application program from the pull down list.
Click on Link Preferences to set the Send to options. You can select
the application from the scroll menu on the left.
4 - 30 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
File:
Select the file format from the Format pull down list. You can either
send the file to the default PaperPort® directory or select your own
destination directory by selecting Other Folder. Use the Browse
button to select the destination directory.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 31
OCR:
Select the destination word processing application program from the
pull down list.
Click on Link Preferences and select the destination Application from
the scroll menu on the left. Select the File Type from the File Type
pull down list. You can also choose another OCR application from
the OCR pull down list if another is installed on you system.
Scansoft® TextBridge® is installed as part of the PaperPort® 8.0 SE
application.
4 - 32 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
E-mail:
Select the destination E-mail application program from the pull down
list.
Click on the Link Preferences button to configure the Send To
E-mail options. You can select the File type and Quick Send E-mail
address list.
USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER 4 - 33
3. Select Scan Settings.
You can select the scanner settings from each of the Scan Type
options for the Custom buttons. You have the option to select Colour
Mode, Resolution, Paper Size and Brightness and Contrast settings.
4 - 34 USING THE WINDOWS® XP-BASED BROTHER SMARTUI CONTROL CENTER
5
Using MFC Remote Setup
(For Windows®)
MFC Remote Setup
The MFC Remote Setup application lets you configure many MFC
settings from a Windows® application. When you access this
application, the settings on your machine will be downloaded to your
PC and displayed on your computer screen. If you change the
settings, you can upload them directly to the machine.
You can't use the MFC Remote Setup application if your
machine is connected via a Network. (For MFC-3320CN and
MFC-3820CN Only) (See Network User’s Guide.)
From the Start menu, select Programs, Brother, MFL-Pro Suite
MFC-XXXX, and then select MFC Remote Setup. (Where XXXX is
your model name.)
OK button
When you click OK, the process of uploading the data to the machine
begins. The MFC Remote Setup program is closed if an error
message is displayed, enter the correct data again and then click
OK.
Cancel button
The Cancel button clears your changes and exits the MFC Remote
Setup application without uploading any data to the machine.
USING MFC REMOTE SETUP 5 - 1
Apply button
The Apply button uploads the data to the machine, but stays in the
Remote Setup application so you can make more changes.
Print button
The Print button prints the selected items on the machine. You
cannot print the MFC Remote Setup changes until you click the
Apply button to upload the new data to the machine. Then you can
click the Print button to get an up-to-date printout.
Export button
Click the Export button to save your current settings to a file.
Import button
Click the Import button to read the settings from your saved file into
the MFC Remote Setup screen.
You can use the Export and Import buttons to save and use
several sets of settings for your machine.
5 - 2 USING MFC REMOTE SETUP
6
Using Brother PC-FAX
software
(For Windows®)
PC-FAX sending
The Brother PC-FAX software lets you send a file from your PC.
You can create a file in any application on your PC, and then send it
as a PC-FAX. You can even attach a cover page note.
All you have to do is set up the receiving parties as Members or
Groups in your PC-FAX Address Book. Then you can use the
Address Book Search feature to quickly find them to address your
fax.
■ PC-FAX is available in Black & White only.
■ If you are using Windows® XP or Windows® 2000
Professional, you need to log on with administrator rights.
USING BROTHER PC-FAX SOFTWARE 6 - 1
Setting up user information
You can access the User Information from the FAX Sending
dialog box by clicking
.
(See Sending a file as a PC-FAX using the Facsimile style user
interface on page 6-16.)
1
2
3
From the Start menu, select Programs, Brother,
MFL-Pro Suite MFC-XXXX (Where XXXX is your model name),
and then select PC-FAX Setup.
The Brother PC-FAX Setup dialog box will appear:
You must enter this information to create the Fax Header and
Cover Page.
Click OK to save the User Information.
6 - 2 USING BROTHER PC-FAX SOFTWARE
Sending setup
From the Brother PC-FAX Setup dialog box, click the Sending tab
to display the screen below.
The user has the choice of two user interfaces: Simple style or
Facsimile style. To change the user interface select the interface
setting you want: Simple style or Facsimile style.
USING BROTHER PC-FAX SOFTWARE 6 - 3
Outside line access
If you need to enter a number to access an outside line, enter it here.
This is sometimes required by a local PBX telephone system (for
example, if you must dial 9, to get an outside line in your office).
Include header
To add header information to the top of the fax pages you send,
check the Include header box.
Address Book file
To select you must enter the path and file name of the database file
which contains the address book information.
—OR—
Use the Browse button to find the database to select.
6 - 4 USING BROTHER PC-FAX SOFTWARE
User interface
In the Sending tab, select user interface you wish to use.
You can choose the Simple Style or the Facsimile Style.
Simple style
Facsimile style
USING BROTHER PC-FAX SOFTWARE 6 - 5
Speed-Dial setup
From the Brother PC-FAX Setup dialog box, click the Speed-Dial
tab. (To use this feature you must select the Facsimile Style user
interface.)
You can register a Member or Group on each of the ten Speed-Dial
buttons.
To register an address in a Speed-Dial button:
1 Click the Speed-Dial button you want to program.
2 Click the Member or Group you want to store on the Speed-Dial
button.
3 Click Add >> to save it.
To clear a Speed-Dial button:
1 Click the Speed-Dial button you want to clear.
2 Click Clear to erase it.
6 - 6 USING BROTHER PC-FAX SOFTWARE
The Address Book
From the Start menu, select Programs, Brother,
MFL-Pro Suite MFC-XXXX (Where XXXX is your model name), and
then click PC-FAX Address Book.
The Brother Address Book dialog box will appear:
USING BROTHER PC-FAX SOFTWARE 6 - 7
Setting up a Member in the Address Book
In the Brother Address Book dialog box you can add, edit and
delete stored information of Members and Groups.
1 In the Address Book dialog box, click the icon to add a
Member.
The Brother Address Book Member Setup dialog box will
appear:
2
In the Member Setup dialog box, type the Member’s information.
Name is a required field. Click OK to save the information.
6 - 8 USING BROTHER PC-FAX SOFTWARE
Setting up a Group for Broadcasting
If you often send the same PC-FAX to several recipients, you can
combine them in to a Group.
1 In the Brother Address Book dialog box, click the icon to
create a Group.
The Group Setup dialog box appears:
2
3
4
Type the name of the new Group in the Group Name field.
In the Available Names box, select each Member to be
included in the Group, and then click Add >>.
Members you add to the Group will be added to the
Group Members box.
After all the members you want have been added, click OK.
USING BROTHER PC-FAX SOFTWARE 6 - 9
Editing Member information
1
2
3
4
Select the Member or Group you want to edit.
Click the edit
icon.
Change the Member or Group information.
Click OK to save your changes.
Deleting a Member or Group
1
2
3
Select the Member or Group you want to delete.
Click the delete
icon.
When the Confirm Item Delete dialog box appears, click OK.
Exporting the Address Book
You can export the whole Address Book to an ASCII text file (*.csv).
Or if you wish, you can select and create a Vcard that will be attached
to that Member’s outgoing E-mail. (A Vcard is an electronic business
card that contains the sender’s contact information.)
To export the whole current Address book:
If you are creating a Vcard, you must first select the member.
If you select Vcard in Step 1, Save as type: will be Vcard (*.vcf).
1
2
From the Address Book select File, point to Export, and then
click Text.
—OR—
Click Vcard and go to Step 5.
From the Available Items column, select the data fields you
wish to Export and then click Add >>.
Select the items in the order you want them listed.
6 - 10 USING BROTHER PC-FAX SOFTWARE
3
4
If you are exporting to an ASCII file, select the Divide Character
- Tab or Comma. This selects between a Tab or Comma to
separate the data fields.
Select OK to save the data.
5
Type the name of the file, and then select Save.
USING BROTHER PC-FAX SOFTWARE 6 - 11
Importing to the Address Book
You can import ASCII text files (*.csv) or Vcards (electronic business
cards) into your Address Book.
To import an ASCII text file:
1 From the Address Book select File, point to Import, and then
click Text.
—OR—
Click Vcard and go to Step 5.
2
From the Available Items column select the data fields you
want to Import, and click Add >>.
From the Available Items list select the fields in the same order
they are listed in the Import text file.
3
4
Select the Divide Character - Tab or Comma based on the file
format you are importing.
To import the data click OK.
6 - 12 USING BROTHER PC-FAX SOFTWARE
5
Type the name of the file, and then select Open.
If you selected a text file in Step 1, the Files of type: will be
Text file (*.csv).
USING BROTHER PC-FAX SOFTWARE 6 - 13
Setting up a Cover Page
From the PC-FAX dialog box click
, to access the PC-Fax Cover
page setup screen.
The Brother PC-FAX Cover Page Setup dialog box will appear:
6 - 14 USING BROTHER PC-FAX SOFTWARE
Entering Coverpage Information
If you are sending a fax to more than one recipient, the recipient
information will not be printed on the Cover Page.
To
From
Comment
Type the comment you want to add to the cover page.
Form
Select the cover page format you want to use.
Import BMP file
You can insert a bitmap file, such as your company logo, in the cover
page.
Use the browse button to select the BMP file, and then select the
alignment style.
Count cover page
When the Count Cover Page box is checked, the Cover Page will be
included in the page numbering. When this box is not checked, the
Cover Page will not be included.
USING BROTHER PC-FAX SOFTWARE 6 - 15
Sending a file as a PC-FAX using the Facsimile
style user interface
1
2
3
Create a file in Word, Excel, Paint, Draw or any other application
on your PC.
From the File menu, select Print.
The Print dialog box will appear:
Select Brother PC-FAX as your printer, and then click OK.
The Facsimile style user interface will appear, if it does not
check the user interface selection setting as detailed on page
6-3.
6 - 16 USING BROTHER PC-FAX SOFTWARE
4
Enter the fax number using any of the following methods:
■ Using the dial pad enter the number.
■ Click any of the 10 Speed-Dial buttons.
■ Click the Address Book button, and then select a Member
or Group from the Address Book.
If you make a mistake click Clear to delete all the entries.
5
6
To include a Cover Page, click
Cover Page On, and then
click the Cover Page
icon to enter or edit the Cover Page
information.
Click Start to send the fax.
If you want to cancel the fax, click Stop.
Redial
If you want to redial a number, click Redial to scroll through the last
five fax numbers, and then click Start.
Sending a file as a PC-FAX using the Simple style
user interface
1
2
Create a file in Word, Excel, Paint, Draw or any other application
on your PC.
From the File menu, select Print.
The Print dialog box will appear:
USING BROTHER PC-FAX SOFTWARE 6 - 17
3
Select Brother PC-FAX as your printer, and then click OK.
The Simple style user interface will appear, if it does not check
the user interface selection setting as detailed on page 6-3.
4
In the To: field, type the fax number of the recipient. You can
also use the Address Book to select destination fax numbers by
clicking the To: button. If you made a mistake entering a
number, click the Clear button to delete all the entries.
To send a Cover Page and note, click the Cover Page On check
box.
5
You can also click the
6
7
icon to create or edit a cover page.
When you are ready to send your fax, click the Send
If you wish to cancel the fax, click the Cancel
icon.
6 - 18 USING BROTHER PC-FAX SOFTWARE
icon.
Setting up PC-FAX receiving
(Windows® 98/98SE/Me and 2000
Professional)
(MFC-3320CN and MFC-3820CN only)
For Windows® XP
See Receiving a fax into the PC (Windows® XP only)
(MFC-3320CN and MFC-3820CN only) on page 6-21.
PC-FAX receiving is only available when using the USB
connection, not the LAN connection.
Running PC-FAX Receiving
From the Start menu, select Programs, Brother, MFL-Pro Suite
MFC-XXXX (Where XXXX is your model name) and then select
‘PC-FAX Receiving’.
The PC-FAX
bar for this Windows® session.
icon will appear on your PC Task
Setting up your PC
1
2
3
Right-click the PC-FAX
icon on your PC
Task Bar, and then click PC-Fax RX Setup.
The PC-Fax RX Setup dialog box will appear:
In Ring Delay, select the number of rings before you want your
PC to answer Incoming calls.
USING BROTHER PC-FAX SOFTWARE 6 - 19
4
5
6
7
In Save file to, use the Browse button if you want to change the
path where PC-FAX files will be saved.
In File Format, select .tif or .max for the format the received
document will be saved in. The default format is .tif.
If you want to, you can check the Play wave file when
receiving FAX check box, and then enter the path of the wave
file.
To load PC FAX receiving automatically when you start up
Windows®, select the Add to Startup folder check box.
Viewing new PC-FAX messages
Each time you start to receive a PC-FAX, the icon will flash
blue and red. Once the fax has been received the icon will remain
red. The red icon will change to green once the received fax has
been viewed.
1 Run PaperPort®.
2 Open the Fax Received folder.
3 Double-click any of the new faxes to open and view them.
The title of your unread PC message will be the date and time
until you assign a file name.
For example “Fax 2-20-2002 16:40:21.tif”
6 - 20 USING BROTHER PC-FAX SOFTWARE
Receiving a fax into the PC
(Windows® XP only)
(MFC-3320CN and MFC-3820CN only)
For Windows® 98/98SE/Me and 2000 Professional
See Setting up PC-FAX receiving (Windows® 98/98SE/Me and
2000 Professional) (MFC-3320CN and MFC-3820CN only) on
page 6-19.
PC-FAX receiving is only available when using the USB
connection, not the LAN connection.
How to receive a fax automatically
1
Select the Start, Printer and Faxes. To activate Faxing
receiving, click Set up faxing in the Printer Tasks menu.
2
The FAX services will be installed on your PC.
USING BROTHER PC-FAX SOFTWARE 6 - 21
3
A Fax icon will then appear in the Printers and Faxes folder. If
the Fax icon does not appear, click Install a local fax printer in
the Printer Tasks menu.
4
Select the Start, All Programs, Accessories,
Communications, Fax, Fax Console.
If you have not configured your fax connection, the following
screen will be displayed.
Enter your details, ensuring you specify the outside line access
number if necessary and click OK.
Select the My location radio button if it is not selected and then
click OK.
5
The Fax Configuration Wizard starts. Click Next.
6 - 22 USING BROTHER PC-FAX SOFTWARE
6
Enter the sender information, and then click Next.
7
Select Brother MFC-XXXX (Where XXXX is your model name)
in the Please select the fax device pull-down list. Click to
select the Enable Receive check box. Specify the number of
rings before your machine will attempt to answer the fax and
click Next.
USING BROTHER PC-FAX SOFTWARE 6 - 23
8
Enter the Transmitting Subscriber Identification (TSID), and
then click Next.
9
Enter the Called Subscriber Identification (CSID), and then
click Next.
6 - 24 USING BROTHER PC-FAX SOFTWARE
10
Select if you want to print the fax or save it to a folder and click
Next.
11
Click Finish.
When PC-FAX Receiving is active, you cannot run the Remote
Setup utility. To use Remote Setup, check off Enable Receive
in Step 7.
For information on how to use PC-FAX Sending and Receiving,
please refer to Help in the Fax Console.
The PC-FAX installation is now complete.
USING BROTHER PC-FAX SOFTWARE 6 - 25
How to view the received faxes
Faxes that are received into the PC will appear in the Fax Console.
Click Start, point to All Programs, Accessories,
Communications, Fax, and then click Fax Console to open the Fax
Console. In the left pane, expand the Fax folder (if it is not already
expanded).
The Fax folder contains the following folders:
■ The Incoming folder contains faxes that are currently being
received.
■ The Inbox folder contains faxes that have been received.
■ The Outbox folder contains faxes that are scheduled to be sent.
■ The Sent Items folder contains faxes that have been successfully
sent.
6 - 26 USING BROTHER PC-FAX SOFTWARE
7
Using the PhotoCapture
Center™ from your PC
(For Windows®) (MFC-3320CN and MFC-3820CN
only)
Do NOT start your computer with your media cards inserted into
the media drive of the machine. You could lose your data or
damage the card.
For USB cable users
For Windows® 2000 users, to access the PhotoCapture
Center™ features from your PC you must first install a Windows®
2000 update. Please see the Quick Setup Guide for installation
instructions.
1
Insert a SmartMedia®, CompactFlash®, Memory Stick® or
SecureDigital card into your machine.
If more than two media cards are inserted at the same time, the
PhotoCapture Center™ will read only the card that was put in
first. To have access to another card, you must first take out all
the cards, and then put in the media card you wish to access.
2
In Windows® Explorer on your PC, double-click the Removable
Disk icon. The files and folders that are on the media card will
appear on your PC screen.
If you are using Windows® XP and you create a name for the
volume label of the media card, the name will appear instead of
‘Removable Disk’.
USING THE PHOTOCAPTURE CENTER™ FROM YOUR PC 7 - 1
3
You can edit the file and save it to another drive on your PC.
When you take out a media card, do the following to prevent damage
to the media card:
1 In the My Computer window, right-click the removable disk icon
and select “Eject” from the Context menu.
2 Wait until the PhotoCapture button stops blinking before taking
out the media card.
Do NOT unplug the power cord, USB cable or remove a
SmartMedia®, CompactFlash®, Memory Stick® or
SecureDigital card from the machine while it is reading the card
(PhotoCapture button flashing). You could lose your data or
damage the card.
If you took out the media card while PhotoCapture button was
flashing, you must immediately restart your PC before putting
the media card back in. If you put in another media card before
the PC is rebooted, the data on it may be destroyed.
While the machine is printing from the PhotoCapture Center™,
your PC cannot access the PhotoCapture Center™ for any other
operation.
Magic Gate Memory Stick can be used, but any music data that
is stored on the stick cannot be read.
7 - 2 USING THE PHOTOCAPTURE CENTER™ FROM YOUR PC
For Network cable users
1
Insert a SmartMedia®, CompactFlash®, Memory Stick® or
SecureDigital card into your machine.
If more than two media cards are inserted at the same time, the
PhotoCapture Center™ will read only the card that was put in
first. To have access to another card, you must first take out all
the cards, and then put in the media card you wish to access.
2
Double-click the Network PhotoCapture Centre icon.
3
Your browser software will appear and a list of file names on
your media card will be shown.
Your browser software accesses the media card using FTP and
the network Host Name of the machine.
4
Click the file name you wish to see.
When you take out a media card, do the following to prevent damage
to the media card:
5 Close the browser.
6 Wait until the PhotoCapture button stops blinking before taking
out the media card.
Do NOT unplug the power cord, or remove a SmartMedia®,
CompactFlash®, Memory Stick® or SecureDigital card from the
machine while it is reading the card (PhotoCapture button
flashing). You could loose your data or damage the card.
If you took out the media card while PhotoCapture button was
flashing, you must immediately restart your PC before putting
the media card back in. If you put in another media card before
the PC is rebooted, the data on it may be destroyed.
USING THE PHOTOCAPTURE CENTER™ FROM YOUR PC 7 - 3
While the machine is printing from the PhotoCapture Center™,
your PC cannot access the PhotoCapture Center™ for any other
operation.
Magic Gate Memory Stick can be used, but any music data that
is stored on the stick can not be read.
7 - 4 USING THE PHOTOCAPTURE CENTER™ FROM YOUR PC
8
Network Scanning
(MFC-3320CN and
MFC-3820CN only)
To use the machine as a Network Scanner, the Network should be
configured with TCP/IP and mail server settings if you use Scan to
E-mail. You can set or change the settings from the control panel.
(Please see the Network User's Guide on the CD-ROM.)
Network License
This product includes the PC license for up to 2 Users.
This Licence supports the installation of the MFL-Pro Software Suite
including ScanSoft® PaperPort® on up to 2 PC’s for use on a
network.
If you want to use more than 2 PCs with ScanSoft® PaperPort®
installed, please purchase NL-5 which is a multiple PC license
agreement pack for up to an additional 5 Users. To purchase NL-5,
please contact your Brother Sales Office.
Registering your PC with the machine
If you need to change the machine that was registered to your PC
during the installation of MFL-Pro Suite (see Quick Setup Guide),
follow the steps below.
1 For Windows® 98/Me/2000
From the Start menu, select Control Panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
For Windows® XP
From the Start menu, select Control Panel, Printers and
Other Hardware, Scanners and Cameras (or Control Panel,
Scanners and Cameras)
NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY) 8 - 1
2
Right-click Scanner Device icon and select properties to view
the Network Scanner Properties dialog box.
Click the Network Setting tab in the dialog box and select a
method to specify the machine as a Network scanner for your
PC.
<
8 - 2 NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY)
Specify your machine by address
Enter the actual IP address of the machine in the IP Address field.
Click Apply and then OK.
Specify your machine by Name
Enter the machine Node name in the Node Name field.
Click Apply and then OK.
Search from a list of available device
Click Browse and select the appropriate device you want to use.
Click OK.
Click Apply and then OK.
NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY) 8 - 3
3
Click the Scan To Button tab in the dialog box and enter your
PC Name in the Display Name field. The machine's LCD
displays the Name you enter. Default setting is your PC Name.
You can enter any name that you like.
4
You can avoid receiving unwanted documents by setting a
4-digit PIN Number. Enter your PIN Number in the PIN Number
and Retype PIN Number field. To send data to a PC protected
by a PIN Number, the LCD prompts to enter the PIN Number
before the document can be scanned and sent to the machine.
(See Using the Scan key on page 8-5 to 8-8.)
8 - 4 NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY)
Using the Scan key
Scan to E-mail (PC)
When you select Scan to E-mail (PC) your document will be scanned
and sent directly to the PC you designated on your network. The
Brother SmartUI will activate the default E-mail application on the
designated PC for addressing to the recipient. You can scan a black
and white or colour document and it will be sent with the E-mail from
the PC as an attachment.
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
You can change the
(Scan) configuration. For Windows®
98/Me/2000: (See Scan to E-mail on page 3-10 to 3-11.) (For
Windows® XP: See Hardware Section: Changing the Scan to button
configuration on page 4-5 to 4-9.)
1
2
3
4
5
Load your document.
Press
(Scan).
Press
or
to select Scan
Scan to E-Mail
to E-Mail.
Press Menu/Set.
Press
or
to select PC.
Press Menu/Set.
—OR—
If there are no other selections, go to Step 5.
Press
or
to select the destination PC you want to use
for E-mailing your document.
Press Menu/Set.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press Mono Start or Colour Start.
The machine will start the scanning process.
NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY) 8 - 5
Scan to Image
When you select Scan to Image your document will be scanned and
sent directly to the PC you designated on your network. The Brother
SmartUI will activate the default graphics application on the
designated PC. You can change the Scan configuration. (For
Windows® 98/Me/2000: See Scan to Image on page 3-14.) (For
Windows® XP: See Hardware Section: Changing the Scan to button
configuration on page 4-5 to 4-10.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
2
3
4
Load your document.
Press
(Scan).
Press
or
to select Scan
Scan to Image
to Image.
Press Menu/Set.
Press
or
to select the destination PC you want to send
to.
Press Menu/Set.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press Mono Start or Colour Start.
The machine will start the scanning process.
8 - 6 NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY)
Scan to OCR
When you select Scan to OCR your document will be scanned and
sent directly to the PC you designated on your network. The Brother
SmartUI will activate ScanSoft® TextBridge® and convert your
document into text for viewing and editing from a word processing
application on the designated PC. You can change the Scan
configuration.
(For Windows® 98/Me/2000: See Scan to OCR (Word Processor) on
page 3-12 to 3-13.) (For Windows® XP: See Hardware Section:
Changing the Scan to button configuration on page 4-5 to 4-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
2
3
4
Load your document.
Press
(Scan).
Press
or
to select Scan
Scan to OCR
to OCR.
Press Menu/Set.
Press
or
to select the destination PC you want to send
to.
Press Menu/Set.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press Mono Start or Colour Start.
The machine will start the scanning process.
NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY) 8 - 7
Scan to File
When you select Scan to File you can scan a black and white or
colour document and send it directly to a PC you designate on your
network. The file will be saved in the folder and file format that you
have configured in the Brother SmartUI on the designated PC. You
can change the Scan configuration.
(For Windows® 98/Me/2000: See Scan to File on page 3-8 to 3-9.)
(For Windows® XP: See Hardware Section: Changing the Scan to
button configuration on page 4-5 to 4-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
2
3
4
Load your document.
Press
(Scan).
Press
or
to select Scan
Scan to File
to File.
Press Menu/Set.
Press
or
to select the destination PC you want to send
to.
Press Menu/Set.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press Mono Start or Colour Start.
The machine will start the scanning process.
Max. 25 clients can be connected to one machine on a Network.
For example, if 30 clients try to connect at a time, 5 clients will
not be shown on the LCD.
8 - 8 NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY)
9
Using your machine with a
Macintosh®
Setting up your USB-equipped Apple®
Macintosh®
Before you can connect the machine to your Macintosh®, you
must buy a USB cable that is not longer than 6 feet (2 metres).
Do not connect the machine to a USB port on a keyboard or
a non-powered USB hub.
The features supported by the machine will depend on the operating
system you are using. The chart below shows which features are
supported.
Mac OS®
Feature
Mac OS® X
8.6
9.X
10.1
10.2.1 or
greater*2
Printing
Yes
Yes
Yes
Yes
Scanning (TWAIN)
Yes
Yes
No
Yes
PC-FAX sending
Yes
Yes
Yes
Yes
Remote Setup
No
No
Yes
Yes
PhotoCapture Center
*1
Yes
Yes
Yes
*1 You need to download USB Mass Storage Support 1.3.5 from
Apple® Web site (www.apple.com).
*2 For Mac OS® X 10.2 user, please upgrade to Mac OS® X 10.2.1
or greater. (The latest information for Mac OS® X, please visit at:
http://solutions.brother.com)
Descriptions in this chapter are based on the MFC-3220C.
These descriptions also apply to the other machines.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 1
Using the Brother printer driver with
your Apple® Macintosh®
(Mac OS® 8.6-9.2)
To select a Printer:
1 Open the Chooser from the Apple menu.
2
Click the Brother Ink icon. On the right side of the Chooser
window, click the printer you want to print to. Close the
Chooser.
To print a document:
3 From the application software such as Presto! PageManager®,
click the File menu and select Page Setup. Change the settings
for Paper Size, Paper Thickness, Paper Source, Orientation,
and Scaling and then click OK.
9 - 2 USING YOUR MACHINE WITH A MACINTOSH®
4
From application software such as Presto! PageManager®, click
the File menu and select Print. Click Print to start printing.
If you want to change Copies, Pages, Quality, Media Type and
Colour/Grayscale, select your settings before clicking Print.
Click the Option button to change Document and Printing
Options.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 3
Using the Brother Printer Driver with
Your Apple® Macintosh® (Mac OS® X)
Choosing page setup options
1
From application software such as Presto! PageManager®, click
the File menu and select Page Setup. Make sure MFC-XXXX
(Where XXXX is your model name) is selected in the Format for
pop-up menu. You can change the settings for Paper Size,
Orientation and Scaling, then click OK.
2
From application software such as Presto! PageManager®, click
File menu and select Print. Click Print to start printing.
9 - 4 USING YOUR MACHINE WITH A MACINTOSH®
Choosing printing options
To control special printing features, choose Print Settings in the
Print dialog box. You can change Quality, Media Type,
Colour/Mono and Bi-Directional Printing settings.
See Resolution on page S-6 in the User’s Guide.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 5
Sending a fax from your Macintosh®
application
For Mac OS® 8.6 - 9.2 users
You can send a fax directly from a Macintosh® application.
1 Create a document in a Macintosh application.
2 To send a fax, select Print from the File menu.
The Printer dialog box will appear:
3
When Printer is selected, the top button shows Print and the
Address button is grayed.
From the Output pull-down menu, select Facsimile.
When Facsimile is selected, the top button changes to Send
Fax and the Address button will be available.
9 - 6 USING YOUR MACHINE WITH A MACINTOSH®
4
5
6
Click Send Fax.
The Send Fax dialog box appears:
The Send Fax dialog box has two list boxes. The left box shows
all the previously Stored Fax Numbers and the right box shows
the Destination Fax Numbers as you select them.
To address the fax, type a fax number in the Input Fax Number
box.
When you are finished addressing your fax, click Send Fax.
To select and only send certain pages of the document, click OK
to go to the Print dialog box.
If you click Send Fax without addressing your fax, the following
error message will appear:
Click OK to go to the Send Fax dialog box.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 7
For Mac OS® X users
You can send a fax directly from a Macintosh® application.
1 Create a document in a Macintosh application.
2 To send a fax, select Print from the File menu.
The Printer dialog box will appear:
3
Select Send Fax from the pull-down menu.
9 - 8 USING YOUR MACHINE WITH A MACINTOSH®
4
Select Facsimile from the Output pull-down menu.
5
To address the fax, type a fax number in the Input Fax Number
box, and the click Print.
If you want to send a fax to more than one number, click Add
after entering the first fax number. The destination fax numbers
will be listed in the dialog box.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 9
Drag a vCard from the Mac OS® X Address Book
application
You can address the fax number using a vCard (an electronic
business card) from Mac OS® application to the destination fax
number field.
1 Click Address Book button.
2 Drag a vCard from the Mac OS® X Address Book application
to the Destination Fax Numbers filed.
When you are finished addressing your fax, click Print.
9 - 10 USING YOUR MACHINE WITH A MACINTOSH®
The vCard used must contain a work fax or home fax number.
When you choose work fax or home fax from the Stored Fax
Numbers pull-down list, only the fax number stored in the
Mac OS® X Address Book for the selected category will be
used. If the fax number is stored in only one of the Mac OS® X
Address Book categories, the number will be retrieved no matter
which category you have selected (work or home).
USING YOUR MACHINE WITH A MACINTOSH® 9 - 11
Scanning from a Macintosh®
The Brother machine software includes a TWAIN Scanner driver for
Macintosh®. You can use this Macintosh® TWAIN Scanner driver
with any applications that support the TWAIN specifications.
Mac OS® X Scanning is supported in Mac OS® X 10.2.1 or
greater.
Accessing the scanner
Run your Macintosh® TWAIN-compliant application software. The
first time you use the Brother TWAIN driver, set it as the default by
choosing Select Source (or the other menu name to select the
device). Afterwards, for each document you scan choose Acquire
Image or Scan. The scanner setup dialog box will appear.
The screen shown in this section are from Mac OS® 9. The
screen on your Macintosh® may vary depending on your
Operating System.
The method of selecting the source or choosing to scan may
vary depending on the application software you are using.
(Mac OS® 8.6–9.2)
9 - 12 USING YOUR MACHINE WITH A MACINTOSH®
Scanning an image into your Macintosh®
You can scan a whole page
—OR—
scan a portion after pre-scanning the document.
Scanning a whole page
1
Load your document in the ADF.
If your model is a flatbed type, you can also place your
document on the scanner glass.
2
3
Adjust the following settings, if needed, in the Scanner Setup
dialog box:
Resolution
Colour Type
Scanning Area
Brightness
Contrast
Click Start.
When scanning has finished, the image will appear in your
graphics application.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 13
Pre-Scanning an image
Pre-Scanning allows you to scan an image quickly at a low
resolution. A thumbnail version will appear in the Scanning Area.
This is only a preview of the image, so you can see how it will look.
The PreScan button will allow you to crop unwanted areas from the
images. When you are satisfied with the preview, click Start to scan
the image.
1 Load your document.
2 Click PreScan.
The whole image will be scanned into your Macintosh® and will
appear in the Scanning Area of the Scanner dialog box:
3 To scan a portion of the prescanned image, click and drag the
mouse to crop it.
4
Insert document in the ADF again.
If your model is a flatbed type, and you loaded the document on
the scanner glass in step 1, please skip this step.
5
6
7
Make your adjustments to the settings for Resolution,
Colour Type (Gray Scale), Brightness, Contrast, and Size in
the Scanner Setup dialog box.
Click Start.
This time only the cropped area of the document will appear in
the Scanning Area.
In your editing software, you can refine the image.
9 - 14 USING YOUR MACHINE WITH A MACINTOSH®
Settings in the Scanner window
Image
Resolution
From the Resolution pop-up menu choose the scanning resolution.
Higher resolutions use more memory and transfer time, but produce
a finer scanned image.
Resolution
Black & White /
Gray
(Error Diffusion)
8 bit colour
True Gray /
24 bit colour
100 x 100 dpi
Yes
Yes
Yes
150 x 150 dpi
Yes
Yes
Yes
200 x 200 dpi
Yes
Yes
Yes
300 x 300 dpi
Yes
Yes
Yes
400 x 400 dpi
Yes
Yes
Yes
600 x 600 dpi
Yes
Yes
Yes
1200 x 1200 dpi
Yes
No
Yes
2400 x 2400 dpi
Yes
No
Yes
4800 x 4800 dpi
(For MFC-3420C
and MFC-3820CN
Only)
Yes
No
Yes
9600 x 9600 dpi
(For MFC-3420C
and MFC-3820CN
Only)
Yes
No
Yes
USING YOUR MACHINE WITH A MACINTOSH® 9 - 15
Colour Type
Black & White—Set the image Type to Black and White for text or
line art. For photographic images, set the image type to Gray (Error
diffusion) or True Gray.
Gray (Error Diffusion)—is used for documents with photographic
images or graphics. (Error Diffusion is a method for creating
simulated gray images by placing black dots instead of the true gray
dots in a specific matrix instead of true gray dots.)
True Gray—is used for documents with photographic images or
graphics. This mode is more exact because it uses up to 256 shades
of gray. It requires the most memory and takes the longest transfer
time.
Colours—Choose either 8-bit Colour, which scans up to 8-bit Colour
or 24-bit colour which scans up to 16.8 million colours. Although
using 24-bit colour creates an image with the most accurate colours,
the image file will be about three times larger than a file created with
8-bit Colour.
9 - 16 USING YOUR MACHINE WITH A MACINTOSH®
Scanning Area
Set the Size to one of the following:
■ Letter 8.5 x 11 in
■ A4 210 x 297 mm
■ Legal 8.5 x 14 in
■ A5 148 x 210 mm
■ B5 182 x 257 mm
■ Executive 7.25 x 10.5 in
■ Business Card 90 x 60 mm (For MFC-3420C ad MFC-3820CN
Only)
■ Custom (User adjustable from 0.35 x 0.35 in. to 8.5 x 14 in. or
8.9 x 8.9 mm to 216 x 356 mm)
After you choose a custom size, you can adjust the scanning area.
Click and hold the mouse button as you drag the mouse to crop the
image.
Width: Enter the width of the custom size.
Height: Enter the height of the custom size.
Business Card Size (MFC-3420C and MFC-3820CN only)
If your machine is flatbed type (MFC-3420C or MFC-3820CN), you
can scan business cards. To scan business cards, select the
Business Card size (90 x 60 mm) and place the business card at the
center of scanner glass.
When you are scanning photographs or other images to use in a
word processor or other graphics application, it is a good idea to try
different settings for the Contrast, Mode and Resolution to determine
which settings look the best.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 17
Adjusting the Image
Brightness
Adjust the Brightness setting to get the best image. The Brother
TWAIN Scanner driver offers 100 Brightness levels (-50 to 50). The
default value is 0, representing an ‘average’ setting.
You can set the Brightness level by dragging the slide bar to the
right to lighten the image or to the left to darken the image. You can
also type a value in the box to set the level. Click OK.
If the scanned image is too light, set a lower Brightness level and
scan the image again.
If the image is too dark, set a higher Brightness level and scan the
image again.
Contrast
You can only adjust the Contrast level when you have selected one
of the Gray Scale settings, it is not available when you have selected
Black & White as the selected Colour Type.
Increasing the Contrast level (by dragging the slide bar to the right)
emphasizes dark and light areas of the image, while reducing the
Contrast level (by dragging the slide bar to the left) reveals more
detail in the gray areas. Instead of using the slide bar, you can type
a value in the box to set the Contrast. Click OK.
9 - 18 USING YOUR MACHINE WITH A MACINTOSH®
Using Presto! PageManager®
Presto! PageManager® is application software for managing the
documents in your computer. Since it is compatible with most image
editors and word processing programs, Presto! PageManager®
gives you unmatched control over your computer files. You can
easily manage your documents and edit your E-mail and files and
read documents with the OCR software built into Presto!
PageManager®.
If you use the machine as a scanner, we recommend that you install
Presto! PageManager®. To install Presto! PageManager®, see the
Quick Setup Guide.
The complete NewSoft Presto! PageManager® 4.0 User’s
Guide can be found on the CD-ROM supplied with your
machine.
Highlights
■ OCR: In one step scan an image, recognize the text, and edit it
with a word processor.
■ Image Editing: Enhance, crop and rotate images, or open them
with an image-editing program of your choice.
■ Annotation: Add removable notes, stamps and drawings to
images.
■ Treeview Window: View and arrange your folder hierarchy for
easy access.
■ Thumbnail Window: View files as thumbnails for easy
identification.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 19
System requirements for Presto! PageManager®
■
■
■
■
PowerPC processor
System 8.6-9.X, 10.1, or greater
CD-ROM drive
Hard disk drive with at least 120 MB of free disk space
Recommended:
■ 8-bit Colour or higher video adapter.
■ Eudora Mail, or Outlook Express electronic mail software
Technical Support
[Germany]
Company name: NewSoft Europe
Postal Address: Regus Center Fleethof Stadthausbrucke 3
20355 Hamburg, Germany
Telephone:
49-40-37644530
Fax:
49-40-37644500
E-mail Address: contact@newsoft.eu.com
URL:
http://de.newsoft.eu.com/
Company name: SoftBay GmbH
Postal Address: Carlstrase 50
D-52531 Ubach-Palenberg
Telephone:
49(0)2451/9112647
Fax:
49(0)2451/409642
E-mail Address: newsoft@softbay.de
URL:
http://de.newsoft.eu.com/
[UK]
Company name:
Postal Address:
Telephone:
Fax:
E-mail Address:
URL:
Guildsoft Ltd
Not Open
44-01752-201148
44-01752-894833
Tech@guildsoft.co.uk
http://uk.newsoft.eu.com/
9 - 20 USING YOUR MACHINE WITH A MACINTOSH®
[France]
Company name:
Postal Address:
Telephone:
Fax:
E-mail Address:
URL:
Graphics-France
Not Open
33-1-49462340
33-1-49462349
newsoft@graphics-france.com
http://fr.newsoft.eu.com/
[Italy]
Company name:
Postal Address:
Telephone:
Fax:
E-mail Address:
V.I.P
Not Open
166821700
532786999
supporto@gensoftonline.com
[Spain]
Company name:
Postal Address:
Telephone:
Fax:
E-mail Address:
Atlantic Devices
Caputxins, 58, 08700 Igualada
938040702-33
938054057
support@atlanticdevices.com
[Other countries]
E-mail Address: tech@newsoft.eu.com
USING YOUR MACHINE WITH A MACINTOSH® 9 - 21
MFC Remote Setup (Mac OS® X)
The MFC Remote Setup application allows you to quickly set up your
machine by taking advantage of the ease and speed of programming
on your Macintosh®. When you access this application, the settings
on your machine will be downloaded automatically to your
Macintosh® and displayed on your computer screen. If you change
the settings, you can upload them directly to the machine.
The ‘machine Remote Setup’ application icon is in Macintosh
HD/Library/Printers/Brother/Utility.
OK
This starts the process of uploading the data to the machine and
exiting the remote setup program. If an error message is displayed
enter the correct data again. Click OK.
Cancel
This exits the remote setup application without uploading the data to
the machine.
Apply
This uploads the data to the machine, but does not exit the remote
setup application.
9 - 22 USING YOUR MACHINE WITH A MACINTOSH®
Print
This command prints the selected items on the machine. You cannot
print the data until it is uploaded to the machine. Click Apply to
upload the new data to the machine and click Print.
Export
This command saves the current configuration settings to a file.
Import
This command reads the settings from a file.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 23
Using the PhotoCapture Center™ from
a Macintosh®
(MFC-3320CN and MFC-3820CN only)
You can access the Media Card inserted into the machine from a
Macintosh®.
For Mac OS® 8.6 only
You have to download “USB Mass Storage Support 1.3.5”
software from the web site of Apple® Macintosh®.
1
Insert a SmartMedia®, CompactFlash®, Memory Stick® or
SecuredDigital card into your machine. The removal disk icon
will appear on the Desktop.
If you create a name for the volume level of the media card, the
name will appear instead of “Removable Disk”.
2
3
4
Double-click the Removable Disk icon. The files and folders that
are on the media card will be displayed on your screen.
You can edit the file and save it to another drive on your Macintosh®.
Quit all applications which are running stored data on the media
card and drag the removal disk icon onto Trash before you
remove the media card from the machine.
The Photo Capture Center™ will only read one card at a time so
do not insert more than one media card at a time.
Do NOT unplug the power cord, USB cable or remove a
SmartMedia®, CompactFlash®, Memory Stick® or SecureDigital
card from the machine while it is reading the card
(PhotoCapture is flashing). You will loose your data or
damage the card.
9 - 24 USING YOUR MACHINE WITH A MACINTOSH®
While the machine is printing from the PhotoCapture Center™,
the Macintosh® cannot access the PhotoCapture Center™ for
another operation.
Magic Gate Memory Stick can be used, but the music data that
is stored on the stick can not be read.
USING YOUR MACHINE WITH A MACINTOSH® 9 - 25
Index
B
Brother Control Center, using
and configuring
Windows® ................. 3-1, 4-1
D
Drivers
Macintosh®
printer ..................... 9-2, 9-4
TWAIN ........................ 9-12
Windows®
printer ..................... 1-1, 1-4
TWAIN ................... 2-1, 2-2
WIA ............................. 2-11
F
Fax
Macintosh®
Mac OS® 8.6-9.2 ........... 9-6
Mac OS® X ........... 9-8, 9-10
Windows®
PC-FAX ......................... 6-1
M
MFC Remote Setup
Macintosh® (Mac OS® X) .. 9-22
Windows® ........................ 5-1
O
OCR ................................. 4-10
P
PaperPort®
(Windows®)
and TextBridge® OCR ..... 2-4
exporting ........................ 2-28
importing ........................ 2-27
I - 1 INDEX
PC-FAX (Windows®) ........... 6-1
receiving ................ 6-19, 6-21
sending
address book ................. 6-7
cover page .................. 6-14
facsimile style .............. 6-16
group ............................. 6-9
simple style ................. 6-17
PhotoCapture Center™
Macintosh® (Mac OS® X) .. 9-24
Windows® ......................... 7-1
Print
Macintosh®
Brother driver ...9-2, 9-4, 9-6
Windows®
driver settings ................ 1-4
keys on control panel .... 1-3
S
Scan
Macintosh®
Scan key ..................... 2-19
Windows®
into PC .......................... 2-4
Network ......................... 8-1
Resolution ..................... 2-7
Scan key .............. 2-19, 8-5
ScanSoft® PaperPort® ... 2-24
TextBridge® OCR ........ 2-27
TWAIN Compliant ......... 2-2
WIA Compliant ............ 2-11
This machine is approved for use in the country of purchase only, local
Brother companies or their dealers will only support machines purchased in
their own countries.
UK/IRE/SAF/PAN NORDIC
Download PDF
Similar pages