HP ProLiant BL620c Generation 7 (G7) Server Blade - Space

QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Overview
1.
2.
3.
4.
5.
6.
HP ProLiant BL620c Generation 7 (G7) Server Blade
Two hot-plug small form factor (SFF) SAS/SATA/SSD 7. Four NC553i 10Gb FlexFabric adapter ports
bays
Power on/standby button
8. iLO 3 Management adapter port
UID, health, and network adapter LEDs
9. HP P410i Smart Array flash cache connector
32 RDIMM slots supporting up to 1.0TB of DDR310. One or two Intel® Xeon® E7-2800 family processors
1333 memory (operating up to 1066 MHz)
up to eight-cores each (below the hard drives)
One USB 2.0 port, one MicroSD high capacity
11. Server release lever
(SDHC) port, and one TPM 1.2 connector
Three PCIe Gen2 I/O expansion mezzanine slots
What's New
Support for the HP OneView Software integrated management platform and a HP 8GB USB Enterprise
Mainstream Flash Media Drive Key Kit
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 1
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Standard Features
This document covers the HP ProLiant BL620c G7 server blade only. For more information on the HP BladeSystem cClass Enclosure and HP BladeSystem c-Class Interconnects, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components QuickSpecs:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
Processors
Ten-Core Processors
One or more of the
Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB, 6.40GT/s QPI, 130W) Processor
following depending on NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more
model
details.
Intel® Xeon® E7-2860 2.26GHz/10-core/24MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB, 6.40GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more
details.
Eight-Core Processors
Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB, 6.40GT/s QPI, 105W) Processor
Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB, 5.86GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more
details.
Six-Core Processors
Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB, 4.80GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more
details.
NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a
ProLiant BL620c G7 server blade with Intel® Xeon® 6500/7500 series processors.
NOTE: All processors within the server must be identical.
NOTE: All servers support one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in
socket CPU1.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's ROM
must be flashed to the latest BIOS prior to the upgrade.
NOTE: All processors support Intel® Hyper-threading.
NOTE: All processors support Intel® Turbo Boost Technology except the E7-2803.
Cache Memory
Up to 30MB level 3 cache memory
Chipset
Intel® 7500 chipset
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 2
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Standard Features
Upgradeability
Upgradeable to two processors
NOTE: All processors within the server must be identical.
NOTE: All servers support one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in
socket CPU1.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's ROM
must be flashed to the latest BIOS prior to the upgrade.
NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to upgrade a
ProLiant BL620c G7 server blade with Intel® Xeon® 6500/7500 series processors.
Integrated
Manageability
HP Integrated Lights-Out 3 (iLO 3)
Memory
Type
Standard
Maximum
DDR3-1333 and DDR3-1066 Registered DIMMs (RDIMM)
(operating up to 1066MHz)
32GB (4 x 8GB)
1.0TB (32 x 32GB RDIMMs)
DDR3 memory options part number decoder
NOTE: See the "Memory" section for memory guidelines, installation rules, and additional
general information.
Network Controllers
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting 10Gb/1Gb
autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated
iSCSI, and iSCSI boot.
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual
Connect FlexFabric 10Gb/24-port Module or HP 10GbE Pass-Thru Module.
NOTE: The Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb
Ethernet module or HP 10GbE Pass-Thru Module.
One (1) 10/100 network adapter port dedicated to iLO 3 Management
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 3
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Standard Features
I/O Expansion Slots
Three (3) mezzanine expansion slots as follows:
Two (2) Type II (25 watts) x8 PCIe Gen2; mezzanine slots 2 and 3 supporting QDR IB,
4Gb and 8Gb FC, 10Gb FlexFabric, 10Gb Flex10, 10GbE, 1GbE, the Smart Array
RAID controllers, and the PCI Pass-thru Expansion card.
Mezzanine slot's 2 ports are routed to interconnect bays 5,6,7,8 (c7000) and
3,4,3,4 (c3000)
Mezzanine slot's 3 ports are routed to interconnect bays 7,8,5,6 (c7000) and
3,4,3,4 (c3000)
One (1) Type I (15 watts) x4 PCIe Gen2; mezzanine slot 1 supporting 4Gb and 8Gb
FC, 10Gb FlexFabric, 10Gb Flex10, 10GbE, and 1GbE
Mezzanine slot's 1 ports are routed to interconnect bays 3,4,3,4 (c7000) and
2,2,2,2 (c3000)
NOTE: HP recommends 10Gb adapters be installed in a x8 PCIe slot for optimal
performance.
NOTE: Type II slots accept both Type I or Type II cards. Type I slots accepted Type I
cards only.
Storage Controller
Maximum Internal
Storage
One or more of the
following depending
on model
Industry Standard
Compliance
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0 and 1.
NOTE: The P410i is configured with no cache allowing the end user to select the desired
option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache option.
P410i 512MB and 1GB flash backed write cache (FBWC) options.
Optional Smart Array RAID mezzanine controllers (with BBWC and FBWC) for connection to
external storage.
NOTE: The server supports up to a combined total of two (2) battery cache options for the
P410i and/or optional Smart Array RAID controllers.
Optional HP D2200sb PCIe Storage Blade for direct attached and shared storage within the
c-Class enclosures.
Hot-plug SAS
2.4TB
2 x 1.2TB drives
Hot-plug SATA
2.0TB
2 x 1.0TB drives
Hot-plug SAS SSD
1.6TB
2 x 800GB drives
Hot-plug SATA SSD
1.6TB
2 x 800GB drives
NOTE: SAS, SATA, and/or SSD drives cannot be mixed within the server.
ACPI 2.0 Compliant
PCI 2.2 Compliant
Microsoft® Logo certifications
USB 2.0
Secure Digital 2.0
TMP 1.2
IEEE (see the NC553i Technical Specifications section)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
Active Directory v1.0 (Windows 2003)
IPMI 2.0
DMTF Systems Management Architecture for Server Hardware Command Line
Protocol (SMASH CLP)
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 4
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Standard Features
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware Server
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, including
how to purchase from HP, please visit our OS Support Site at:
http://www.hp.com/go/ossupport
Enclosures
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 4 HP ProLiant
BL680c G7 servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 2 HP ProLiant
BL680c G7 servers plugged horizontally.
Server blades, storage blades, and interconnect modules are all designed to fit into the
c7000 and c3000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Resolution Color
1280 x 1024, 16.7M , 64k, 256,16
Depths
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Form Factor
Full height, single wide server blade that plugs into the HP BladeSystem c3000 and c7000
enclosures
HP Insight
HP Service Pack for
management softwareProLiant
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager
(HP SUM) version 5 provide a new, comprehensive approach to
firmware and system software maintenance. Together they provide
better operating stability and ensure maximum uptime. The SPP will
be updated at a predictable cadence, typically coinciding with new
HP server hardware launches. By enabling firmware to be updated
online and integrating firmware and system software updates in one
operation HP SUM and the SPP offer faster updates of individual
servers and dramatically faster updates of entire BladeSystem
enclosures. Further improving system uptime and stability is the fact
that HP provides 12 months of support on each Service Pack for
ProLiant.
The user experience around HP SUM and the SPP has been
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 5
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Standard Features
improved in several ways, starting with the web download. A single
web page provides access to a single download containing both the
latest version of HP SUM version 5 and the latest SPP. Optional
smaller subsets with only specific types of servers or specific
operating systems are offered to save on download time. The HP
SUM application has been re-written to provide a more
straightforward, intuitive user interface that guides the user through
the steps of discovery, analyses and update, providing
comprehensive information on available updates, criticality and
interdependencies. This information is also available in reports. By
providing the option of multiple local or shared repositories which
can be easily updated from hp.com, HP SUM provides the tools to
optimize stability and consistency throughout the company. While
HP SUM and the SPP will recommend the combinations of firmware
and system software that HP has found to be the best practice, the
application gives customers the flexibility to set their own specific
baseline.
The Service Pack for ProLiant has been rigorously tested with
specific attention for interaction between firmware, drivers and
agents both within the server as well as in interaction with the
BladeSystem enclosure components (Onboard Administrator and
Virtual Connect). This testing ensures the highest quality as well as
providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates
and order of update deployment.
HP Insight Foundation
The Service Pack for ProLiant (which includes HP SUM 5) can be
downloaded from: www.hp.com/go/spp/download. More information
can be found: http://www.hp.com/go/spp and
http://www.hp.com/go/hpsum
Insight Foundation is being baselined at version v8.70 which means
the following:
Its Media Kit (contains 2 SmartStart CDs, the Firmware DVD,
and the Management DVD) will continue to ship with all
supported ProLiant G7 or earlier BTO servers until the last
supported server is no longer shipping.
The Media Kit will not be updated past version 8.70.
ProLiant G7 or earlier CTO servers are able to order the
Media Kit with the understanding that the media is not
updated. Please check specific server QuickSpecs for
availability of CTO Kit.
PSP and Firmware DVD downloads will be updated through
2Q 2012 at the HP Insight Foundation Suite for ProLiant
downloads tab: http://www.hp.com/go/foundation
Customers are urged to use the replacement product, HP Service
Pack for ProLiant, instead of Insight Foundation Suite which is found
at these location:
www.hp.com/go/spp
www.hp.com/go/spp/download
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 6
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Standard Features
Security
Availability
Intel® AES-NI
Power-on password
Administrator's password
Integrated Lights-Out 3 with:
12 customizable user accounts
SSL encryption
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard
(3DES) on browser, CLP and XML scripting interface
AES and RC4 encryption of video
Disable via a global setting
Keyboard password
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Memory
HP Memory Quarantine (based on Intel MCA Recovery technology). In conjunction with
the operating system support, allows a server to recover from uncorrectable memory
errors which would have otherwise caused a system crash.
Double Device Data Correction (DDDC). DDDC provides the ability to save a DIMM
from being replaced due to a bad dram device.
Data Bus ECC protection for automatic correction from a single data bit error and
detection of double data error bits.
Advanced ECC/SDDC provides continued memory operation in the event of a single
memory device failure and allows removal of a single DRAM from the memory map if it
exhibits a failure and recovers its data into a new device.
Supports for both x4 and x8 Intel® SDDC.
Demand Scrubbing writes corrected data back to the memory once a correctable error
is detected on a read transaction.
DIMM Address/Control Bus Parity Protection provides a means to detect and protect
command and address errors.
Memory Failover uses a mirrored DIMM once a failed DIMM in a mirrored set is
detected.
Memory Mirroring provides a copy of memory stored with dynamic failover in case of
failure within socket (intra-socket) memory mirroring.
The system will operate in non-hemisphere mode when mirroring is enabled.
Rank Sparring (On Line Spare) provides dynamic failover to a spare DIMM rank or
spare rank pair behind the same memory controller. Cannot be enabled concurrently
with memory mirroring.
NOTE: HP offers the rank sparing rather than DIMM sparing as rank sparing uses less
spare memory resulting in less overhead.
Failed DIMM Isolation identifies a specific failing DIMM lockstep pair thereby enabling
the user to replace only the failed DIMM pair. Identifies a single DIMM for correctable
errors and DIMM pair for uncorrectable errors.
Virtualization
Intel® VT-x (FlexMigration, FlexPriority, and Extended Page Tables) provides:
Platform control between the VMM and guest OSs for faster, more reliable and
secure transfers.
VM migration features that enhance flexibility for failover, load balancing, disaster
recovery, and maintenance.
Intel® VT-x Real Mode & Pause Loop Exiting:
Real Mode allows guests to operate in real mode, removing the performance
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 7
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Standard Features
overhead and complexity of an emulator.
Pause Loop Exiting provides detection of spin locks in guest software and helps
avoid lock-holder preemption to reduce overhead and improve performance.
Intel® VT-d (Intel® Virtualization Technology for Directed I/O) enables the VMM to
assign specific I/O devices to specific guest OSs improving security and availability.
Mezzanine options and I/O
Optional dual-port Fibre Channel mezzanine cards for redundant SAN connections.
Optional dual-port InfiniBand mezzanine cards for redundant high performance
connections.
Four embedded Ethernet adapter ports for redundant LAN connections.
Multiple mezzanine I/O expansion slots each supported multiple data paths routed to
redundant interconnect modules.
Network Adapter Teaming (Bonding) provides network fault tolerance, transmit load
balancing, and switch-assisted load balancing.
Processor/Chipset
Processor Internal Sensors & Thermal Control protection against over-temperature
conditions.
Cache parity/ECC protects cache data from accidental data corruption due to particle
hits.
Machine Check Architecture (MCA) detects and captures hardware errors such as
system bus, ECC, parity, cache, other.
Enhanced MCA handling & error logging builds upon the original Machine Check
Architecture to: offers more "banks" and increased "resolution" for reporting errors that
cause MCA events and 2) sets check flags for the OS to poll.
External Bus Error Recovery (ECC) enables automatic correction from a single data bit
error and detection of double data error bits on the memory data bus.
Corrupt Data Containment tags faulty data before it is consumed (often called data
poisoning) to limit the impact to the currently running program and to greatly reduce the
need to reset the system.
On-Die Error Protection protects registers from particle hits.
Storage
Two hot-plug SAS/SATA/SSD drive bays.
Integrated HP Smart Array P410i Controller with RAID 0 and 1 standard
Integrated HP Smart Array P410i Controller upgradeable firmware with recovery ROM
capability
HP Smart Array P410i flash backed write cache (FBWC) options to 1GB.
Optional multiple Smart Array RAID mezzanine controllers (with BBWC and FBWC) for
direct attach and shared SAS storage external to the c-Class enclosure.
Optional HP D2200sb Storage Blade for direct attached and shared storage within the
c-Class enclosure.
Intel® QuickPath Interconnect (QPI)
QPI Link Retry restarts as cycle when a failure is detected on the link.
QPI Clock Failover redirects the forwarded clock to one of the two failover clock lanes
in the event of a forwarded clock failure.
QPI Self-Healing enables a QPI link to map a failed lane and downshift from full to ½
width (or ½ width to ¼ width) QPI link if there are errors on the link.
QPI Cycle Redundancy Checking (CRC) automatically detects data errors using a
checksum of either 8 bits or 16 bits.
QPI Poisoning tags an erroneous packet with a "poisoned bit" on the QPI fabric.
QPI Lane Failover identifies a faulty lane within data paths removing them from
operation reducing command/address errors.
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 8
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Standard Features
Server Blade Enclosure Infrastructure
Up to 10 hot-plug redundant Active Cool fans per enclosure.
Up to 6 hot-plug high efficiency redundant power supplies per enclosure.
Dual grid power providing redundant rack enclosure power feeds to the enclosure.
Up to eight interconnect modules per enclosure providing four simultaneous redundant
fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, iSCSI, SAS,
etc.
Optional enclosure redundant Onboard Administrator system management module.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic
support and repair is available for three years from date of purchase. Support for software
and initial setup is available for 90 days from date of purchase. Enhancements to warranty
services are available through HP Care Pack services or customized service agreements.
Hard drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty
repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These
parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A
travel and labor charge will result when customers decline to replace a Mandatory CSR part;
2) Optional CSR parts are also designed for easy replacement but may involve added
complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available
at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 9
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Optional Features
Fibre Channel SupportUp to three (3) optional 4Gb and/or 8Gb Fibre Channel HBA mezzanine adapters (Brocade,
Emulex and QLogic options).
Compatible SAN
HP ProLiant BL620c G7 server blades are optimized for HP MSA, EVA, and XPHP and are
compatible with select third party SANs. See the blade storage page for more details at
http://h18004.www1.hp.com/products/blades/components/c-class-sans.html.
HP Virtual Connect
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server
connectivity to data and storage networks, and reduces costs. Unique HP Flex-10 technology
makes maximum use of network bandwidths, provide dynamic tuning and enable extreme
flexibility to meet individual server and infrastructure requirements by allocating up to 4
network connections per server port. Virtual Connect FlexFabric modules extend those
capabilities to allocate one function per port to storage connections. HP Virtual Connect
Enterprise Manager (VCEM) provides server management software with a central console to
administer network connections and workloads for thousands of servers. For more
information on Virtual Connect Enterprise Manager see: www.hp.com/go/vcem. For more
information on Virtual Connect Ethernet, Fibre Channel, Converged Network and
management options see: www.hp.com/go/virtualconnect
HP Virtual Connect
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server
connectivity to data and storage networks, and reduces costs. Unique HP Flex-10 technology
makes maximum use of network bandwidths, provide dynamic tuning and enable extreme
flexibility to meet individual server and infrastructure requirements by allocating up to 4
network connections per server port. Virtual Connect FlexFabric modules extend those
capabilities to allocate one function per port to storage connections. HP Virtual Connect
Enterprise Manager (VCEM) provides server management software with a central console to
administer network connections and workloads for thousands of servers. For more
information on Virtual Connect Enterprise Manager see: www.hp.com/go/vcem. For more
information on Virtual Connect Ethernet, Fibre Channel, Converged Network and
management options see: www.hp.com/go/virtualconnect
HP Insight
HP Insight Control
management software
HP Matrix Operating
Environment
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy
to deploy, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console. For
more information, see http://www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP
support staff and proactive delivery of software updates. For more
information about this service, please visit:
http://www.hp.com/services/insight.
The HP Matrix Operating Environment (Matrix OE) for ProLiant and
Integrity servers is an integrated command center that helps you
instantly adjust to dynamic business demands. This advanced
infrastructure management software lets you reduce the cost of
common data center tasks by up to 40 percent while keeping pace
with your changing business.
The HP Matrix OE includes the automated provisioning,
optimization, and recovery management capabilities for HP
CloudSystem Matrix, the ideal platform for private cloud and
Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 10
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Optional Features
HP Integrated LightsOut (iLO)
HP OneView
HP Integrated Lights-Out (iLO) simplifies server setup, health
monitoring, power and thermal control, and lights-out remote
administration of ProLiant ML, DL, and BL servers. HP iLO functions
without additional software and can be accessed from any location
via a web browser. HP iLO works hand-in-hand with HP Systems
Insight Manager, Insight Control, and Matrix Operating Environment
for ProLiant, helping customers unleash the value of the ProLiant
platform and deliver the highest possible quality of IT service. For
more information, visit: www.hp.com/go/iLO.
The HP OneView architecture combines server, storage, and networking with control of
datacenter environmentals into a single, integrated management platform. Architected to
deliver lifecycle management for the complete Converged Infrastructure, it facilitates
collaboration, removes friction, collapses cycle times, eliminates error-prone work, and
accelerates time to value. HP OneView v1.0 combines management of servers and virtual
connect with open integration to automate and customize existing tools and processes. With
OneView, you'll work smarter-with greater visibility and control-and fully capitalize on the
benefits of a Converged Infrastructure.
For more information on HP OneView management, see: http://www.hp.com/go/oneview.
High Performance
Clusters
HP Cluster Platforms
HPC Interconnects
HP Insight Cluster
Management Utility
HP Proactive Insight
experience
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance
Computing, with a choice of servers, networks and software.
Operating system options include specially priced offerings for Red
Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as
Microsoft Windows HPC Server. A Cluster Platform Configurator
simplifies ordering. http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration
tools. http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster Management Utility (CMU) is an HP-licensed and
HP-supported suite of tools that are used for lifecycle management
of hyperscale clusters of Linux ProLiant systems. CMU includes
software for the centralized provisioning, management and
monitoring of nodes. CMU makes the administration of clusters user
friendly, efficient, and effective. http://www.hp.com/go/cmu
Prevent problems with innovative, automated monitoring tools and proactive services. The
HP Proactive Insight experience consist of using Insight Online, Insight Remote Support, and
Proactive Care Support Service as one integrated solution. The Proactive Insight experience
provides you with expert advice and personalized, cloud-based automated IT support,
helping to prevent unplanned down time and solve problems quickly. For more information,
visit: www.hp.com/go/proactiveinsightexperience
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 11
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Optional Features
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services
for HP servers and storage products. Customers can choose how their factory solutions are
built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation,
complex configuration and design services as well as individual factory services, such as
image loading, asset tagging, and custom packaging. HP products supported through
Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP
ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx,
VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server model please
contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Simple
Configurator
SCE is a guided self service tool to help sales and non technical people provide customers
with initial configurations in 3 to 5 minutes. You may then send the configuration on for
configuration help, or use in your existing ordering processes. If you require "custom" rack
configuration or configuration for products not available in SCE, please contact HP's
Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 12
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Service and Support
Service and Support HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service
partner who understands your increasingly complex business technology environment. That's
why it makes sense to team up with the people who know HP infrastructure hardware and
software best - the experienced professionals at HP Services.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack services offer complete care and support expertise with committed response
choices designed to meet your IT and business needs.
HP Foundation Care services offer scalable reactive support-packages for HP industrystandard servers and software. You can choose the type and level of service that is most
suitable for your IT and business needs. HP Proactive Care delivers high levels of system
availability through proactive service management and advanced technical response.
Recommended HP Care Pack Services for your HP product
Optimized Care
3-Year HP 6 hour Call to Repair Response, Proactive Care
Combined reactive and proactive support for hardware and software helping optimize your
systems and delivering high levels of availability through proactive service management and
advanced technical response. Hardware problem resolution to return the hardware in
operating condition within 6 hours of the initial service request. A Technical Account
Manager, as your single point of contact, will own your call or issue end to end until resolved.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP Install c-Class Server Blade Service
This easy-to-buy, easy-to-use HP Care Pack service helps ensure that your new HP
hardware is installed smoothly, efficiently, and with minimal disruption of your IT and
business operations.
Standard Care
3-Year HP 24x7 4 hour response, Proactive Care Service
This service gives you combined reactive and proactive support including rapid access to our
Advanced Solution Center to manage and prevent problems and a Technical Support
Specialist with a broad level of technical knowledge that will engage with additional technical
expertise as needed from HP's vast global resources.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP Install c-Class Server Blade Service
This easy-to-buy, easy-to-use HP Care Pack service helps ensure that your new HP
hardware is installed smoothly, efficiently, and with minimal disruption of your IT and
business operations.
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 13
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Service and Support
Related Services
HP Proactive Care Personalized Support - Environmental Option
The Personalized Support option provides an assigned Account Support Manager who can
bring best practices from across the industry plus extra technical skills to your IT team. This
option is only available as an add-on to HP Proactive Care Support.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You
can buy Proactive Select Service Credits when you purchase your hardware and then use the
credits over the next 12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA23842ENN.pdf
Additional HP Care Pack services can be found at:
http://www.hp.com/go/cpc
Insight Online/Insight HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and
Remote Support
problem resolution. This comes at no additional cost with your HP solution. Learn more about
Insight Remote Support http://www.hp.com/go/insightremotesupport and Insight Online
http://www.hp.com/go/insightonline
NOTE: Insight Remote Support is a prerequisite for Proactive Care. All blades within a single
HP BladeSystem enclosure must be at the same service level.
HP Support Center
Personalized online support portal with access to information, tools and experts to support
HP business products. Submit support cases online, chat with HP experts, access support
resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to
an agent for live support. Now, you can get access to personalized IT support anywhere,
anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a
HP warranty, HP Care Pack or HP contractual support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible
SSD/Flash Drives replaced by HP due to malfunction.
For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP
sales representative or HP Authorized ServiceOne Channel Partner. Or visit:
www.hp.com/services/bladesystem
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 14
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Pre-Configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
HP ProLiant BL620c Processor(s)
(1) Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB, 6.40GT/s QPI,
G7 E7-2860 1P 32GB- One of the following
130W) Processor
R Server
depending on model
(1) Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB, 6.40GT/s QPI,
643763-B21
130W) Processor
(1) Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB, 6.40GT/s QPI,
HP ProLiant BL620c
105W) Processor
G7 E7-2850 1P 32GB- Cache Memory
24MB L3 cache
R Server
Memory
32GB (4 x 8GB) DDR3-1333 RDIMMs (operating up to 1066MHz)
643764-B21
Network Controllers Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports
supporting 10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP
HP ProLiant BL620c
offload engine, hardware-based accelerated iSCSI, and iSCSI boot
G7 E7-2830 1P 32GBOne (1) 10/100 network adapter port dedicated to iLO 3
R Server
Management
643765-B21
Storage Controller
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller
with RAID 0 and 1
NOTE: The P410i is configured with no cache allowing the end user
to select the desired cache option (if cache is desired in the first
place).
NOTE: RAID 0 and 1 are supported on the P410i without the need
for a cache option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery
cache options for the P410i and/or optional Smart Array RAID
controllers.
Hard Drives
No drives included; supports up to two (2) hot-plug SFF
SAS/SATA/SSD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 800GB
Optical Drive
None
Form Factor
Up to 4 blades in the HP BladeSystem c3000 enclosure
Up to 8 blades in the HP BladeSystem c7000 enclosure
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 15
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on Factory Integrated Model product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
NOTE: Configure-to-order servers must start with a Factory Integrated Model (CTO) Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HP Models
HP ProLiant BL620c G7 W Configure-to-order Server
Configurable model ships with:
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine,
hardware-based accelerated iSCSI, and iSCSI boot
One (1) 10/100 network adapter port dedicated to iLO 3 Management
One (1) Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with
RAID 0 and 1
NOTE: The P410i is configured with no cache allowing the end user to select the
desired cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache
option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery cache
options for the P410i and/or optional Smart Array RAID controllers.
Two (2) small form factor hot-plug SAS/SATA/SSD hard drive bays
Three (3) I/O expansion slots
One (1) integrated Lights-Out 3
Integrated USB, MicroSDHC, and TPM connectors
643786-B21
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted):
HP Processors
NOTE: The BL620c G7 supports one or two processors.
NOTE: The minimum processor configuration is one processor that must be
installed in socket CPU1.
NOTE: All processors within the server must be identical.
NOTE: All Configure-to-Order processor kits contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 kit and one xxxxxxB21 kit.
NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to
upgrade a ProLiant BL620c G7 server blade with Intel® Xeon® 6500/7500
series processors.
Ten-Core Processors
HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB/130W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB/105W) FIO
Processor Kit
Eight-Core Processors
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
643749-L21
643751-L21
643753-L21
643761-L21
Page 16
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Configuration Information - Factory Integrated Models
HP Memory
HP BL620c G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB/105W) FIO
Processor Kit
Six-Core Processors
HP BL620c G7 Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB/105W) FIO
Processor Kit
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: See the "Memory" section for memory guidelines, installation rules, and
additional general information.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
LP Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7
LP Memory Kit
643755-L21
643757-L21
643759-L21
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
Step 3: Choose Additional Options for Factory Integration
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single
Server FIO License
Converged
HP OneView with iLO Advanced - Server hardware required on same
Infrastructure
purchase order
Management Software HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1
Svr Lic
HP OneView incl 3yr 24x7 Supp Bundle 1 Svr E-LTU
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle 1 Svr E-LTU
C6N36A
E5Y43A
E5Y43AAE
F6Q89A
F6Q89AAE
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, including server blade enclosures interconnect and mezzanine options and power subsystem
options; please see the Core Options and Additional sections below and the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components QuickSpecs:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 17
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Core Options
NOTE: For additional "Core Options" and "Additional Options" please see the options sections below.
HP Ethernet
Gigabit Ethernet Mezzanines
Mezzanine Options
HP NC325m PCI Express Quad Port Gigabit Server Adapter
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of
server memory.
NOTE: A 10 Gigabit Ethernet adapter will down speed to 1Gb if paired with a
1GbE interconnect.
NOTE: HP recommends 10Gb adapters be installed in an x8 PCIe slot for
optimal performance.
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC553m 10Gb 2-port FlexFabric Adapter
HP Fibre Channel
Mezzanine Options
4Gb Fibre Channel mezzanine adapters
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
8Gb Fibre Channel mezzanine adapters
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
416585-B21
445978-B21
447883-B21
453246-B21
467799-B21
539857-B21
610609-B21
613431-B21
403621-B21
403619-B21
456972-B21
451871-B21
590647-B21
Page 18
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Core Options
HP Processors
NOTE: The BL620c G7 supports one or two processors.
NOTE: The minimum processor configuration is one processor that must be
installed in socket CPU1.
NOTE: All processors within the server must be identical.
NOTE: All -B21 processor kits listed below contain one (1) processor.
NOTE: If upgrading an existing BL620c G7 server to a different processor,
the server's ROM must be flashed to the latest BIOS prior to the upgrade.
NOTE: Intel® Xeon® E7-2800/8867L series processors cannot be used to
upgrade a ProLiant BL620c G7 server blade with Intel® Xeon® 6500/7500
series processors.
Ten-Core Processors
HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W)
Processor Kit
HP BL620c G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W)
Processor Kit
HP BL620c G7 Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB/130W)
Processor Kit
HP BL620c G7 Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB/105W)
Processor Kit
Eight-Core Processors
HP BL620c G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W)
Processor Kit
HP BL620c G7 Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB/105W)
Processor Kit
Six-Core Processors
HP BL620c G7 Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB/105W)
Processor Kit
HP Memory
HP Hard Drives
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: See the "Memory" section for memory guidelines, installation rules,
and additional general information.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS9 Low Power Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered
CAS-9 LP Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered
CAS-7 Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered
CAS-7 LP Memory Kit
643749-B21
643751-B21
643753-B21
643761-B21
643755-B21
643757-B21
643759-B21
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, firmware, and the server backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to
an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to
the specific hard drive QuickSpecs for details.
NOTE: Two drives are required for RAID 0 and 1.
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 19
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Core Options
NOTE: SAS, SATA, and/or SSD drives cannot be mixed within the server.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr
Warranty Hard Drive
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr
Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr
Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr
Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr
Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr
Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr
Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr
Warranty Hard Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty
Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty
Hard Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty
Hard Drive
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot
Solid State Drives
NOTE: These drives support G7 servers only.
HP 120GB 6G SATA Value Endurance SFF 2.5-in Enterprise Boot 3yr Wty
Solid State Drive
HP 80GB 6G SATA Value Endurance SFF 2.5-in Enterprise Boot 3yr Wty
Solid State Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value
Solid State Drives
NOTE: These drives support G7 servers only.
HP 800GB 6G SATA Value Endurance SFF 2.5-in Enterprise Value 3yr Wty
Solid State Drive
HP 600GB 6G SATA Value Endurance SFF 2.5-in Enterprise Boot 3yr Wty
Solid State Drive
NOTE: This drive supports G7 servers only.
HP 480GB 6G SATA Value Endurance SFF 2.5-in Enterprise Value 3yr Wty
Solid State Drive
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
718160-B21
693648-B21
619291-B21
581286-B21
581284-B21
627117-B21
507127-B21
512547-B21
605835-B21
507610-B21
625609-B21
507750-B21
728726-B21
734366-B21
728743-B21
739904-B21
728739-B21
Page 20
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Core Options
HP 300GB 6G SATA Value Endurance SFF 2.5-in Enterprise Boot 3yr Wty
Solid State Drive
NOTE: This drive supports G7 servers only.
HP 240GB 6G SATA Value Endurance SFF 2.5-in Enterprise Value 3yr Wty
Solid State Drive
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State
Drives
NOTE: These drives support G6 and G7 servers only.
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in Enterprise
Mainstream 3yr Wty Solid State Drive
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in Enterprise
Mainstream 3yr Wty Solid State Drive
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in Enterprise
Mainstream 3yr Wty Solid State Drive
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in Enterprise
Mainstream 3yr Wty Solid State Drive
6G SAS Hot Plug Enterprise Performance Solid State Drives
HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr
Warranty Solid State Drive
HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr
Warranty Solid State Drive
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State
Drives
HP 800GB 6G SAS Mainstream Endurance SFF 2.5-in Enterprise
Mainstream 3yr Warranty Solid State Drive
HP 400GB 6G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream 3yr
Warranty Solid State Drive
HP 200GB 6G SAS Mainstream Endurance SFF 2.5-in Enterprise
Mainstream 3yr Warranty Solid State Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
739894-B21
728735-B21
730065-B21
730063-B21
730061-B21
730059-B21
632494-B21
632492-B21
690823-B21
690821-B21
690819-B21
Page 21
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Additional Options
HP Insight Software
Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
Server License
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic
License
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO
Electronic License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
NOTE: HP Insight Management Media Kit contains DVDs without licenses.
Contains HP Systems Insight Manager, HP Insight Control, HP Matrix Operating
Environment, and Virtual Connect Enterprise Manager software. Uses an
integrated installer to perform quick and accurate software installation and
updates.
NOTE: Licenses ship without media. The Insight Control Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
(Worldwide)
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced Blade including 3yr 24x7 Tech Support and Updates
Electronic License
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and
Updates
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Eight Server
License
HP iLO Advanced for BladeSystem including 1yr 24x7 Tech Support and
Updates Electronic License
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server
License
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service
NOTE: For additional license kits, including electronic delivery options, please
see the iLO QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14276_div/14276_div.html
(Worldwide)
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic
License
HP Insight Control Server Deployment including 1yr 24x7 Support Single Server
License
NOTE: Licenses ship without media.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
C6N27A
C6N28ABE
C6N36ABE
BD883A
C6N31A
E6U63ABE
BD502A
512489-B21
E6U60ABE
512488-B21
T9082AAE
452151-B21
Page 22
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Additional Options
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
(Worldwide)
Converged
HP OneView
Infrastructure
HP OneView with iLO Advanced
Management Software
HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView Media Kit Phys No Lic
HP OneView without iLO Advanced
HP OneView w/o iLO Adv incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView w/o iLO Adv inc 3yr 24x7 Supp Flex Qty E-LTU
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/quickspecs/14621_div/14621_div.html
High Performance
Clusters
HP Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one node (server).
Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for
multiple licenses and support with a single activation key. Each license is for
one node (server). Customer will receive a printed end user license
agreement and license entitlement certificate via physical shipment. The
license entitlement certificate must be redeemed online in order to obtain a
license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media
NOTE: Order a minimum of one license per cluster to purchase media
including software and documentation, which will be delivered to the
customer, and also licenses Insight CMU management. No license key is
delivered or required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
(Worldwide)
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
E5Y34A
E5Y35AAE
E5Y37A
E5Y38A
E5Y39AAE
QL803B
BD476A
BD477A
Page 23
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Additional Options
HP Security
HP Trusted Platform Module Option
NOTE: The BL620c G7 server includes a Trusted Platform Module (TPM)
connector for an optional TPM 1.2 upgrade. The TPM 1.2 option is a
microcontroller chip that can securely store artifacts used to authenticate the
server platform. These artifacts can include passwords, certificates and
encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a
data protection feature available in Windows Server® 2008. BitLocker
leverages the enhanced security capabilities of TPM version 1.2. The TPM
works with BitLocker to help protect user data and to ensure that a server
operating Windows Server 2008 has not been tampered with while the
system was offline.
NOTE: For more information about TPM, including a white paper, go to:
http://www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required
for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
HP Storage
Controllers
NOTE: The P410i is configured with no cache allowing the end user to select
the desired cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a
cache option.
NOTE: The server supports up to a combined total of two (2) battery cache
options for the P410i and/or optional Smart Array RAID controllers.
HP Smart Array P711m Controller
HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS
Controller
HP Smart Array P712m Controller
HP Smart Array P712m/256 6Gb 2-ports Int/2-ports Ext Mezzanine SAS
Controller
HP Smart Array P731m 512 Controller
HP Smart Array P731m/512 FBWC 6Gb 4-ports Ext Mezzanine SAS
Controller
Optional Upgrades
HP 512MB Flash Backed Write Cache
NOTE: This is an option for the HP Smart Array P410i Controller (P410i is
standard integrated controller).
HP 1GB Flash Backed Cache
NOTE: This is an option for the HP Smart Array P410i Controller (P410i is
standard integrated controller).
HP Smart Array P-Series Low Profile Battery
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and
Updates Single Server License
NOTE: The above HP Smart Array Advanced Pack and any above cache
option are required to enable Smart Array Advanced Pack features on the
P410i. For more information go to: http://www.hp.com/go/saap.
NOTE: The Smart Array Advanced Pack is hosted on the P410i Smart Array
Controller hardware firmware stack.
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/14035_div/14035_div.html
(Smart Array P711m Controller)
http://h18000.www1.hp.com/products/quickspecs/13296_div/13296_div.html
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
488069-B21
513778-B21
488348-B21
698536-B21
534916-B21
534562-B21
452348-B21
516471-B21
Page 24
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Additional Options
(Smart Array P712m Controller)
http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html
(Worldwide)
(Smart Array Advanced Pack)
HP c-Class
Mezzanines
HP Ultrium Tape
Blades
HP InfiniBand Mezzanine Options
HP 4X QDR QLogic InfiniBand Dual Port Mezzanine HCA for c-Class
BladeSystem
HP BL c-Class PCI Express Mezzanine Pass Thru Option Kit
NOTE: The HP PCI Express Mezzanine Pass-Thru Card is required to
support the HP Ultrium Tape Blades and the PCI Expansion Blade. Up to
two Ultrium Tape and/or PCI Expansion Blades are supported per server mix
and match.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
583210-B21
431643-B21
HP StoreEver LTO-4 Ultrium SB1760c Tape Blade
AQ697B
HP StoreEver LTO-5 Ultrium SB3000c Tape Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21)
is required to support the Ultrium Tape Blades with the BL620c G7. Up to
two storage blades are supported per server mix and match (Ultrium Tape,
PCI Expansion Blades, and/or Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
HP D2200sb PCIe Storage Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21)
is required to support the HP D2200sb PCIe Storage Blade with the BL620c
G7. Up to two storage blades are supported per server mix and match
(Ultrium Tape, PCI Expansion Blades, and/or Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
NOTE: Please see the HP s D2200sb PCIe Storage Blade QuickSpecs for
technical specifications and additional information at:
http://h18006.www1.hp.com/storage/bladesystem/index.html.
BS580B
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
AP880A
Page 25
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Additional Options
HP Expansion Blade
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one
PCIe connect board which requires installation.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21)
is required to support the HP PCI Expansion Blade with the BL620c G7. Up
to two expansion blades are supported per server mix and match (Ultrium
Tape, PCI Expansion Blades, and/or Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
NOTE: In a c3000 rack enclosure where the blades are installed horizontally,
up to two expansion blades may installed in the two slots created by the mini
divider in the top half of the enclosure with a BL620c G7 installed in the
lower half of the enclosure.
NOTE: In a c3000 tower and c7000 rack enclosure where the blades are
installed vertically, two expansion blades may installed in the blade slots
adjacent to the BL620c G7 by staking one on top of another via a blade
coupler that is included with the PCI Express Mezzanine Pass-Thru Card
and the expansion blades. If a single expansion blade is installed, it must be
installed in the lower slot adjacent to the BL620c G7; a half-height server
may be installed above the expansion blade.
NOTE: Please see the HP PCI Expansion Blade QuickSpecs for technical
specifications and additional information at
http://h18004.www1.hp.com/products/blades/expansion/index.html.
HP Flash Media Kits
for USB Drives
HP USB 2-Button Optical Scroll Mouse
HP USB Standard Keyboard DT528A ABA
HP Flash Media Kits for USB Drives
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that
support the VMware virtualization environment. HP recommends this
industry standard USB flash device for use with VMware ESXi. USB device
must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP VMware Getting Started Guide for installation
instructions.
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP 8GB microSD Enterprise Mainstream Flash Media Kit
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13971_div/13971_div.html
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
448018-B21
DC172B
DT528A#ABA
608447-B21
737953-B21
726116-B21
Page 26
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Additional Options
HP Care Pack Services Proactive Care - Collaborative Support plus Proactive services delivered by the
on shore/near shore Advanced Solution Center (ASC) and backed by the global
delivery organization, end-to-end case ownership from a Technical Solution
Specialists and Technical Account Manager who remotely delivers
firmware/software revision management, proactive scans and incident trend
reports. Recommended for customers running a virtualized infrastructure and/or
customers who desire an enhanced call support experience.
HP 3 year 4 hour 24x7 ProLiant BL6xxc Proactive Care Service
HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant BL6xxc
Proactive Care Service
HP 3 year 6 hour Call To Repair 24x7 ProLiant BL6xxc Proactive Care Service
HP 3 year 6hr Call To Repair 24x7 with Defective Media Retention ProLiant
BL6xxc Proactive Care SVC
Proactive Care Personalized Support Environmental Option - to add an
onsite Account Support Manager (ASM) to Proactive Care. ASM is an assigned
resource who delivers support planning and brings technical expertise and best
practices advice for the customer's environment.
HP 3 year ISS ProactiveCare Personalized Support
Installation Services - reduce the time required to get your system up and
running and help minimize disruptions to your business.
HP Install c-Class Server Blade Service
HP Hardware Installation during Non Standard Hours c-Class Server Blade
Service
Additional HP Care Pack services can be found at:
http://www.hp.com/go/cpc
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
U3B32E
U3B35E
U3B38E
U3B41E
U6W98E
UE493E
UG869E
Page 27
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Memory
Memory Subsystem Architecture
For maximum memory bandwidth, performance, and capacity, each processor socket contains two memory controllers. Each
memory controller connects to two Intel® 7510 Scalable Memory Buffers (SMB) for a total of four SMBs per processor. Each
SMB connects to four RDIMMs for a grand total of sixteen RDIMMs per installed processor (32 total RDIMMs per BL620c
G7 server) providing up to 1.0TB of memory (32GB RDIMMs x 32 DIMM slots).
All RDIMMs will operate at the highest possible speed for a given processor. Memory speed is not affected by number of
RDIMMs or ranks. However, memory speed is a function of the processor QPI bus speed per the following:
Processors with a QPI speed of 6.40GT will operate memory at 1066MHz
Processors with a QPI speed of 5.86GT will operate memory at 978MHz
Processors with a QPI speed of 4.80GT will operate memory at 800MHz
DDR3 and DDR3L Memory Population Guidelines
An overview of the RDIMM installation guidelines are summarized below. For detailed memory configuration rules and
guidelines, please see the BL620c G7 user guide at: www.hp.com/support and the Online DDR3 Memory Configuration Tool
at: www.hp.com/go/ddr3memory-configurator.
1.
2.
3.
4.
Install only HP BL620c G7 supported DDR3 and DDR3L RDIMMs.
RDIMMs must be installed for processor 1.
Populate RDIMM slots for a processor only if the processor is installed.
To maximize performance in multi-processor configurations, distribute the total memory capacity between all
processors as evenly as possible.
5. The minimum configuration is two RDIMMs installed on processor 1.
6. RDIMMs must be installed in pairs with identical characteristics. When possible, for configuration simplicity, HP
recommends using RDIMMs with identical part numbers throughout the system.
7. For best performance, HP recommends that RDIMM pairs be populated in sequence by letter designation. Install
RDIMM pair (4A, 5A) first, followed by RDIMM pair (12B, 16B), RDIMM pair (2C, 7C), RDIMM pair (10D, 14D), RDIMM
pair (3E, 6E), RDIMM pair (11F, 15F), and RDIMM pair (1G, 8G).
8. When installing mixed rank RDIMMs for any processor, RDIMMs with the highest number of ranks must be installed in
the white RDIMM connector locations. This guarantees proper electrical signaling on the DDR3 channel since
RDIMMs with higher rank counts present larger electrical loading on the DDR3 channel and must be populated at the
end point of the channel.
9. 1.5V DDR3 and 1.35V DDR3L RDIMMs may be installed within the same socket. In this case, all RDIMMs on that
socket will operate at 1.5V.
10. The BL620c G7 supports memory hemisphere mode (for a high-performance memory interleaving technology) as well
as several advanced memory modes (AMP) including advanced ECC, online spare, and mirrored memory. Please see
the BL620c G7 user guide at: www.hp.com/support for a description of each of these features and their memory
configuration guidelines.
11. There are several additional recommended steps for memory performance optimization, please see the BL620c G7
user guide at: www.hp.com/support for a complete list.
Standard Memory
32GB (4 x 8GB) of dual-rank DDR3-1066 RDIMMs
Standard Memory Plus Optional Memory
Up to 832GB of memory is available with the installation of optional DDR3 RDIMM memory expansion kits
Model Standard Memory Replaced with Optional Memory
Up to 1.0TB of memory is available with the removal of standard memory and the installation of optional DDR3 RDIMM
memory expansion kits
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 28
HP ProLiant BL620c Generation 7 (G7) Server
Blade
QuickSpecs
Memory
ProLiant BL620c G7 Memory Configurations
Memory
Standard
32GB total
Optional
416GB per
CPU
(832GB total)
Maximum
512GB per
CPU
(1.0TB total)
Processor 1 RDIMM Slots
(Processor 2 has the same DIMM slot numeration, but all slots are empty)
1G
2C
3E
4A
5A
6E
7C
8G
Empty
Empty
Empty
8GB
8GB
Empty
Empty
Empty
9H
10D
11F
12B
13H
14D
15F
16B
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM configuration)
1G
2C
3E
4A
5A
6E
7C
8G
32GB
32GB
32GB
8GB
8GB
32GB
32GB
32GB
9H
10D
11F
12B
13H
14D
15F
16B
32GB
32GB
32GB
32GB
32GB
32GB
32GB
8GB
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM configuration)
1G
2C
3E
4A
5A
6E
7C
8G
32GB
32GB
32GB
32GB
32GB
32GB
32GB
32GB
9H
10D
11F
12B
13H
14D
15F
16B
32GB
32GB
32GB
32GB
32GB
32GB
32GB
32GB
HP ProLiant BL620c G7 memory options:
HP Memory
Registered DIMMs (RDIMMs)
Following are the BL620c G7 memory options available from HP:
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
LP Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7
LP Memory Kit
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: For detailed memory configuration rules and guidelines, please see the
BL620c G7 user guide at: www.hp.com/support and use the Online DDR3
Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
Page 29
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Storage
1-2
2 x SFF SAS/SATA/SDD hot-plug hard drives
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane)
should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: SAS, SATA, and/or SSD drives cannot be mixed within the server.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported Controller
1.2TB 6G SAS 10K
2
1-2
Smart Array P410i Controller
900GB 6G SAS 10K
600GB 6G SAS 10K
450GB 6G SAS 10K
300GB 6G SAS 15K
300GB 6G SAS 10K
146GB 6G SAS 15K
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
1.0TB 6G SAS 7.2K
2
1-2
HP Smart Array P410i Controller
500GB 6G SAS 7.2K
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
1.0TB 3G SATA 7.2K
2
1-2
HP Smart Array P410i Controller
500GB 3G SATA 7.2K
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
Quantity
Position
Supported
Supported Controller
120GB 6G SATA VESFF
2
1-2
HP Smart Array P410i Controller
80GB 6G SATA VESFF
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
Quantity
Position
Supported
Supported Controller
800GB 6G SATA VE
2
1-2
HP Smart Array P410i Controller
SFF
600GB 6G SATA VE
SFF
480GB 6G SATA VE
SFF
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 30
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Storage
300GB 6G SATA VE
SFF
240GB 6G SATA VE
SFF
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported Controller
800GB 6G SATA ME
2
1-2
HP Smart Array P410i Controller
SFF
400GB 6G SATA ME
SFF
200GB 6G SATA ME
SFF
100GB 6G SATA ME
SFF
6G SAS Hot Plug Enterprise Performance Solid State Drives
Quantity
Position
Supported
Supported Controller
400GB 6G SAS SLC
2
1-2
HP Smart Array P410i Controller
200GB 6G SAS SLC
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported Controller
800GB 6G SAS MLC
2
1-2
HP Smart Array P410i Controller
400GB 6G SAS MLC
200GB 6G SAS MLC
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 31
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Technical Specifications
System Unit
Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
Full height, single-wide server blade:
14.46 x 2.19 x 20.09 in (36.73 x 5.49 x 51.03 cm)
Maximum
24.24lbs (11.00kg)
(all hard drives, DIMMs,
mezzanine cards, and
processors installed)
Minimum
17.9lbs (8.12kg)
(two hard drives, four
DIMMs, no mezzanine
cards, and two
processors installed)
For power specifications including input requirements, BTU rating, and
power supply output, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
(Worldwide)
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
(Worldwide)
To review typical system power ratings use the HP BladeSystem Power
Sizer available at: http://www.hp.com/go/bladesystem/powercalculator.
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be
reduced if operating with a fan fault or above
30°C (86°F).
Non-Operating
-30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 85% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-Operating
10 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
For acoustic noise specifications, please see the HP BladeSystem cClass Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 32
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Technical Specifications
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
Smart Array P410i
Controller
Disk Drive and
Enclosure Interface
6G SAS (Serial Attached SCSI)
3G SATA (Serial Advanced Technology Attachment)
SAS Connectors
Two (2) internal (SFF8484) x4 wide port connectors
Cache Memory Speed DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
maximum bandwidth.
Server Interface
x4 5G PCIe Gen2 provides 2GB/s maximum bandwidth.
SAS Speed
x2 6G SAS provides 1.2GB/s maximum bandwidth.
Cache Memory
72-bit 1GB cache; ECC protection, capacitor-backed
Logical Drives
Up to 32 logical drives
Supported
Maximum Logical Drive2 TB (2 x 1 TB)
Capacity
Host Memory
64-bit, supporting greater than 4GB server memory space
Addressing
RAID Support
RAID 0 (Striping)
RAID 1 (Mirroring)
NOTE: RAID 0 and 1 require two drives installed in the server.
NOTE: RAID 0 and 1 are supported on the P410i without the need for a
cache option.
Upgradeable Firmware Upgradeable firmware with recovery ROM capability
HP NC553i10Gb
FlexFabric Adapter
Type
Integrated KR 10GbE with FlexFabric (Flex-10, FCoE, accelerated
iSCSI, iSCSI boot, 10GbE, 1GbE, TCP/IP offload engine)
Network Processor
Blade Engines 3 (BE3)
Data Transfer Method x8 PCI Express 2.0
Network Transfer Rate 20Gbps per port full duplex only (theoretical maximum value)
NOTE: Each port is autosensing 1Gb / 10Gb, and can interoperate with
1Gb HP BladeSystem c-Class interconnect components.
NOTE: Each port on the NC553i adapter transmits from the server at
20Gbps (theoretical) full duplex.
IEEE Compliance
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
Standard Features
ProLiant Teaming including Network Fault Tolerance, Transmit
Load Balancing, and Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
FCoE or accelerated iSCSI mode
iSCSI boot
Flex-10 support
TCP/IP offload engine
10Gb Ethernet ort 1Gb Ethernet autosensing
Microsoft TCP chimney compliant
Supports 8 Physical Functions (PF)
Supports 128 Virtual Functions (VF):
Up to 32 VFs per PF
Support 128 MAC address
Traffic Shaping and QoS across each VF and PF:
NIC Fine-grain QoS 10 Mbps to 10Gbps in steps of 10Mbps
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 33
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Technical Specifications
HBA fine-grain QoS 1000 IOPs to 500,000 IOPs in steps of 1000
IOPS
On-chip VM-VM switching
Traffic steering and isolation
Hardware based filtering for 128 VLANIDs with QinQ tag filtering
Protection against denial-of-service attacks & malfunctioning VMs
HP Integrated LightsOut 3 (iLO 3)
Architecture
Processor
Upgradeability
Video Support
Interfaces
Memory
Operating System
Support
PCI Express based health and remote management ASIC
PCI Express RISC processor core operating at 250MHz
Option firmware upgradeable via Flash ROM
1600 x 1200 DVR max resolution
One Ethernet network connection (10/100Mb/s)
128-MB DDR with ECC
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit and 64 bit)
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and
Windows Server 2003 for Extended Systems Standard Edition,
Enterprise Edition
Red Hat Enterprise Linux 5.4 (32 bit and 64 bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Microsoft Windows 2008 R2
Client System Support Microsoft Windows 7
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client Browser Support Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Command Line
Secure Shell and serial port access
Support
Secure Socket Layer
Secure Shell version 2
Security
Advanced Encryption Standard (AES) and Triple Data Encryption
Standard (3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Directory Support
Active Directory v1.0 (Windows 2003)
Services
Driver Support
HP ProLiant iLO3 Management Controller Driver Package
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 34
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server
Blade
Technical Specifications
Management protocols SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems
supported
Management Architecture for Server Hardware Command Line Protocol
(SMASH CLP), HP RIBCL XML
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft is a US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes (1,000 MB). Actual formatted capacity is less.
DA - 13747 Worldwide QuickSpecs — Version 36 — 2.18.2014
Page 35
Download PDF
Similar pages