sensors
rotary
linear
motion
systems
TR-Electronic - Your partner
in the world of automation
Extract from our
product range
controls
The modular range of encoders
Absolute rotary and linear measurement technology has represented TR-Electronic‘s main business
for more than twenty years. Right from the beginning we were your partner for custom solutions.
In the following, we want to present you our modular system for absolute encoders which, we‘re
confident, contains a suitable sensor for your automation task.
Series
C
Compact encoder
For standard industrial applications
F
Feedback encoder
For closed drive systems
Q
“Q-bic“ encoder
For open drive systems
The traditional type, but at the same time
Due to their minimal depth, our feedback
The cubic design offers space for more -
extremely flexible. Available as solid shaft
encoders are especially suitable for instal-
whether for the hollow shaft with up to 25
encoder or also in different versions with
lation on drives - a fact that influenced
mm diameter or for the over sized connec-
hollow shaft, blind shaft or integrated
their design as hollow shaft encoders or
tor panel which e.g. either allows simul-
coupling.
encoders with integrated coupling.
taneous output of commutation, SSI and
fieldbus signals or accepts two connectors
for redundancy.
Detection
E
Optical up to 15 bits
X
Optical 17 bits and up
The resolution of 13 / 15 bits (programmable), as singleturn or
Probably the only detection available on the market with pro-
multiturn encoder, meets the requirements of most applications
grammable Sine/Cosine output (each resolution up to 65536
in industrial automation. The expanded choice of interfaces and
pulses). In combination with the 17 bits absolute signal, almost
numerous options enable particular and individual solutions.
unlimited possibilities are created e.g. for gearless drives, safety
applications...
O Optical 16 bits and up
M Magnetical
Up to 17 bits / revolution (programmable) solve almost every
Our “M“ detection is very well suitable for applications that do
industrial measurement problem, when high demands on resolu-
not make high demands on resolution, accuracy and interface
tion are made.
variety.
Devices shown
are a selection from
our product range
Mechanical version
V
Solid shaft
Actually, so ordinary that there‘s nothing much to write about but we have shafts with flats, with or without keys in both US and metric dimensions.
H
Hollow shaft
With or without key/slot, up to 25 mm diameter
S
Blind shaft
In contrast to hollow shafts, a blind shaft has the advantage of only one opening.
Therefore it is generally more suitable for high rotation speeds.
K
Integrated coupling
Combines torsion resistant mounting of a solid shaft encoder with the
compact design of a blind shaft. Vibrations and shaft eccentricity are balanced by
a cross coupling element made of plastic (PUR).
Only the article number exactly identifies a specific encoder with all options and type details. Therefore the article number is essential for
availability and compatibility.
Options and combinations not shown on the following pages may be possible, on request !
You can find more detailed information in the respective encoder brochures CE, XE... as well as in the corresponding data sheets.
The types shown do not state anything about availability and detailed design options. Your local sales representative will give you that information.
Absolute rotary encoders
C
Compact encoder
E
13 bits abs., 4096 inc.
F
O
4096 / 32768 revolutions
Feedback encoder
Q “Q-bic“ encoder
17 bits abs., 4096 inc.
X
4096 / 32768 revolutions
17 bits abs., 32768 inc.
65536 revolutions
M
10 bits abs.,
4096 revolutions
The industrial standard for absolute rotary and position measurement
Absolute resolution / revolution:
13 bits, programmable
Number of revolutions:
single turn or
multi turn 4096, 32768 as an option
Maximum rotation speed:
12 000 / min (CH 58: 6 000 / min)
Incremental and period resolutions available: 512, 1024, 2048, 4096
digital or sine/cosine, separate resolution track
Solid shaft
Blind shaft
Hollow shaft
Integrated coupling
CE 58
CS 58
CH 58
CK 58
Size:
58 mm
Connectivity:
Radial connector, radial cable gland
Axial connector, axial cable gland (not for CH 58)
Radial fieldbus end-cap (for Profibus: illuminated address display, externally viewable)
Interfaces:
single turn
Parallel, SSI, ISI, programmable incremental interface (digital) INC
Option: A, B (hardware incremental signal)
multi turn
SSI, ISI
Profibus (PNO class 2), CAN DeviceNet, CANopen,
AS-i (not for CH 58)
Option: A, B (digital or sine/cosine) (not for fieldbus devices)
Programmability:
devices with direct interface (SSI, ISI..): via PC, TRWinProg
devices with fieldbus: via fieldbus
Devices shown
are a selection from
our product range
C
Compact encoder
E
13 bits abs., 4096 inc.
F
O
4096 / 32768 revolutions
Feedback encoder
Q “Q-bic“ encoder
17 bits abs., 4096 inc.
X
4096 / 32768 revolutions
17 bits abs., 32768 inc.
65536 revolutions
M
10 bits abs.,
4096 revolutions
The industrial standard - even more compact
Absolute resolution / revolution:
13 bits, programmable; up to 8192 steps / revolution
Number of revolutions:
single turn
Maximum rotation speed:
12 000 / min (CEH 58 S: 6 000 / min)
Incremental and period resolutions available: 512, 1024, 2048, 4096
digital or sine/cosine, separate resolution track
Solid shaft
Blind shaft
Hollow shaft
Integrated coupling
CEV 58 S
CES 58 S
CEH 58 S
CEK 58 S
Size: 58 mm
Connectivity:
Radial connector, radial cable gland
Axial connector, axial cable gland (not for CEH 58 S)
(depends on the interface)
Interfaces:
SSI, SSI with incremental track, SSI with sine/cosine incremental track,
cam controller CAS, parallel
Programmability:
via PC
Absolute rotary encoders
C
Compact encoder
E
13 bits abs., 4096 inc.
F
O
4096 / 32768 revolutions
Feedback encoder
Q “Q-bic“ encoder
17 bits abs., 4096 inc.
M
4096 / 32768 revolutions
10 bits abs., 256 inc.
4096 revolutions
For industrial applications with
low demands on resolution
Absolute resolution / revolution:
13 bits, programmable
Resolution: programmable, up to
Number of revolutions:
single turn or
1024 steps / revolution
multi turn 4096
Number of revolutions: single turn
or multi turn 4096
Solid shaft
Integrated coupling
Solid shaft
CE 65
CK 65
CMV 58 M/S
Size:
65 mm
Size: 58 mm
Connectivity:
Radial connector, radial cable gland
Connectivity:
Axial connector, axial cable gland
Radial connector,
Fieldbus end-cap
radial cable gland
others on request
Interfaces:
Devices shown
are a selection from
our product range
single turn
Parallel, camshaft gear, tool changer,
Interfaces:
SSI, ISI, SSI+analog (16 bits)
SSI 1024 steps / revolution
Profibus, Interbus, CANopen, DeviceNet, CAN, FO
programmable
Option: A, B
Incremental up to 256
multi turn
Parallel, CAM controller, tool changer,
pulses / revolution pro-
SSI, ISI, SSI+analog (16 bits)
grammable,
Profibus, Interbus, CANopen, DeviceNet, CAN, FO,
A, B, Z and commuta-
FIPIO, new: EtherCAT, Powerlink
tion signals
Option: A, B
Programmability:
via PC or fieldbus
C
Compact encoder
E
13 bits abs., 4096 inc.
4096 / 32768 revolutions
F
O
Feedback encoder
Q “Q-bic“ encoder
17 bits abs., 4096 inc.
X
4096 / 32768 revolutions
17 bits abs., 32768 inc.
65536 revolutions
M
10 bits abs.,
4096 revolutions
For high demands on resolution
Absolute resolution / revolution:
17 bits, programmable
Number of revolutions:
single turn or
multi turn 4096, 32768 as an option
Incremental and period resolutions available: 512, 1024, 2048, 4096
digital or sine/cosine, separate resolution track
Solid shaft
Blind shaft
Hollow shaft
Integrated coupling
COV 58
COS 58
COH 58
COK 58
Size:
58 mm
Connectivity:
Radial connector, radial cable gland
Axial connector, axial cable gland (not for hollow shaft)
Radial fieldbus end-cap (for Profibus: illuminated address display, externally viewable)
Interfaces:
single turn
Parallel, SSI, ISI, programmable incremental interface (digital) INC
Option: A, B (hardware incremental signal)
multi turn
SSI, ISI
Profibus (PNO class 2), CAN DeviceNet, CANopen,
AS-i (not for COH 58)
Option: A, B (digital or sine/cosine) (not for COH 58)
Programmability:
devices with direct interface (SSI, ISI..): via PC, TRWinProg
devices with fieldbus: via fieldbus
C
Compact encoder
E
13 bits abs., 4096 inc.
F
O
4096 / 32768 revolutions
Feedback encoder
Q “Q-bic“ encoder
17 bits abs., 4096 inc.
X
4096 / 32768 revolutions
17 bits abs., 32768 inc.
65536 revolutions
The specialist for particular demands
Absolute resolution / revolution:
17 bit, programmable
Number of revolutions:
single turn or
multi turn 65536
Programmable SIN/COS:
up to 32768 pulses / revolution
Solid shaft
Integrated coupling
Blind shaft
XE 65
XK 65
XS 65
Size:
65 mm
Connectivity:
Radial connector, radial cable gland
Axial connector, axial cable gland
Fieldbus end-cap
Interfaces:
Devices shown
are a selection from
our product range
single turn
Parallel, SSI, ISI, sine/cosine (programmable)
Option: A, B
multi turn
SSI, ISI, sine/cosine (programmable)
Option: A, B
Programmability:
via PC, TRWinProg
Q
E
F
“Q-bic“ encoder
O
13 bits abs., 4096 inc.
4096 / 32768 revolutions
Feedback encoder
17 bits abs., 4096 inc.
4096 / 32768 revolutions
For special hollow shaft applications
Absolute resolution / revolution: 13 / 17 bits, programmable
Number of revolutions:
single turn or multi turn 4096, opt. 32768
Incremental and period
resolutions available:
512, 1024, 2048, 4096
digital or sine/cosine (A, B additional to the chosen absolute interface)
Hollow shaft
Hollow shaft
QEH 80
QOH 80
Size:
80 mm
Resolution:
13 bits abs., programmable
17 bits abs., programmable
Shaft diameter:
max. 20 mm
Connectivity:
Radial connector, radial cable gland
Radial fieldbus end-cap
Interfaces:
single turn
Parallel, SSI, ISI, programmable incremental interface
(digital) INC
Option: A, B (digital)
multi turn
SSI, ISI
Profibus (PNO Class 2), CAN DeviceNet, CANopen
Option: A, B (digital)
Programmability:
SSI, ISI.. PC, TRWinProg
devices with fieldbus: via fieldbus
Absolute rotary encoders
C
Compact encoder
D
10 / 13-15 bits abs.,
F
Q
Feedback encoder
“Q-bic“ encoder
up to 32768 revolutions
10
Double encoder
Double encoder
Two complete encoders with common main shaft.
With common hollow shaft up to
One or also both systems can be realized as programmable incremental
25mm. Combination of single turn
encoders.
and multi turn encoder.
Varied combinations possible
For direct use in the drive train.
For redundance applications or special interface combinations.
Enlarged availability of interfaces,
Multi-interfaces
Solid shaft
Hollow shaft
CDV 58
QDH 80
Size:
Size: 80 mm
58 mm
First system:
Second system:
Resolution, interfaces:
Resolution, interfaces:
13 - 15 bits / revolution,
10 bits / revolution,
13 - 15 bits / revolution,
up to 32768 revolutions
up to 32768 revolutions
up to 32768 revolutions SSI, ISI, analog, fieldbusses,
hardware incremental or
signals, sine/cosine-incremen tal signals...
SSI, ISI, commutation signals the same variety of interfaces
13 - 15 bits / revolution,
as our series CE 58 (second
up to 32768 revolutions
system optimal for SSI,
ISI, prog. inc.signals, cams)
Shaft: Solid shaft, also available
SSI, ISI, analog, fieldbusses,
hardware incremental Shaft: Hollow shaft 25 H 7, clam-
with groove or flat; others on signals, SIN/COS-incremental request
signals...
Connectivity:
Devices shown
are a selection from
our product range
according to interface
(second system single turn)
ping ring, with groove up to 20 mm
Connectivity:
according to interface
according to interface
Q “Q-bic“ encoder
X
Special type
17 bits abs., 32768 inc.
Special
65536 revolutions
detection
Programmable Sinusoidal
Encoder for manual operation
up to 32768 pulses / revolution
Absolute resolution / revolution
with display
with large hollow shaft
17 bits, programmable
Absolute resolution / revolution
Absolute resolution / revolution
single turn or
6 bits
17 bits, programmable
multi turn 65536 revolutions
multi turn 65536 revolutions
Hollow shaft
Hollow shaft
Encoder with display
XH 80
ZH 81
MG 75
single turn or
multi turn 65536 revolutions
Size: 80 mm
Size: 80 mm
Size:
75 mm
20 mm
Connectivity: connector, cable gland
Connectivity: connector, cable gland
Hollow shaft: Interfaces:
Interfaces:
Interfaces:
single turnSSI, ISI,
multi turn SSI, ISI,
asynchronous serial interface
sine/cosine (programmable) commutation
(RS 485) with customized protocol
up to 32 encoders on one bus
Option: A, B
Profibus
multi turn SSI, ISI,
Interbus-S
sine/cosine (programmable)
The MG 75 was designed as an
Option: A, B
electronic support for the adjustment
of printing, wood working and card-
Programmability: PC, TRWinProg
Programmability: PC, EPROG
board processing machines.
The machine control system communicates the new destination value,
the encoder calculates the difference
and the correct direction of rotation.
11
Accuracy and Reliability
Rotary encoder, constructed according to newest engineering and
security standards!
1
Protection and safety through standardized and accredited conceptual design:
- concepts according to security standards
- monitored development
- classified devices
- prototype testing
- external assembly controlling
- 100% serial tests
User friendly:
- comfortable and spacious area around connector, enables secure wiring
- enhanced interface resistance (EMC)
- high portection class IP 5
- enhanced resistance to shock and vibration
- large range of supply voltage
- standardized interfaces
- compact design with ø 5 mm
TR-Electronic offers security
safety step SIL CL according to EN 1508 respectively PL e according to EN ISO 18
Devices shown
are a selection from
our product range
Minimal design
with two independent rotary encoders
2 independent systems
- optical and magnetical
- 2 separate gears - multi-turn
multi-interface technology
optical
detection
multi-turn
optical
detection
single turn
incremental
interface
sine/cosine
interface
SSI
hollow shaft, 20 mm
magnetical
detection
single turn
SSI
magnetical
detection
multi-turn
connector hood
rotary encoder CDH 75 M
spacious area around connector
- LED status indicator for both systems
- clamping technique
SIL CL 3 according EN 61508 respectively PL e according EN ISO 13849
www.tr-electronic.de
13
Incremental rotary encoders
Programmable incremental encoders
IEV 58
IEH 58
IOV 58
programmable incremental encoder
programmable incremental encoder
programmable incremental encoder
with solid shaft
with hollow shaft, torque support
spring or groove / pin, anti-swiveling
safeguard
Variations
Hollow shaft device
14
Maximum resolution
2 - 1024 steps / revolution
5 - 32768 steps / revolution
as well as 2048, 4096, 8192
Programmability
Devices are delivered with customized pre-programmation
Interfaces available
via PC
A, A neg. - B, B neg. - Z, Z neg.
(digital signals)
line driver or push pull
Shaft
Solid shaft 6, 10mm
Hollow shaft 10, 12 mm
Solid shaft 6, 10mm
flange ZB36, ZB 50 (others in prep.)
clamping ring on the flange
flange ZB36, ZB 50
Supply
24 V (11... 27 VDC) or 5 V
24 V (11... 27 V DC)
Maximum rotation
12 000 / min
6 000 / min
12 000 / min
Protection class (DIN 40 050)
IP 65
IP 54
IP 65
Operating temperature
General description
-30... +70 °C
-20... +70 °C
Programmable incremental encoders solve the storage problem of multiple fixed disk encoders with different
resolutions. You determine the encoder‘s resolution via software - even after installation.
Devices shown
are a selection from
our product range
Hardware incremental encoders
IE 58
IS 58
IH 58
IK 58
Hardware incremental encoder
Hardware incremental encoder
Hardware incremental encoder
Hardware incremental encoder
with solid shaft
with blind shaft
with hollow shaft
with integrated coupling
15
1 - 10000 steps / revolution
A, A neg. - B, B neg. - Z, Z neg.
(digital signals)
sine/cosine
line driver or push pull
Solid shaft 6, 10, 12 mm
Hollow shaft 8, 10, 12 mm
Integrated coupling with customized
mounting flange
11... 27 VDC
5 V DC
12 000 / min
up to IP 65, accord. to specifications
IP 65
-20... +70 °C
6 000 / min
12 000 / min
up to IP 54, accord. to specifications
IP 65
Electric accessories
Programming adapter
Connects the device to the PC. Changes signals from USB to encoder programming interface and is electrically isolated. TR-Nr. 490-00310
We suggest the use in conjunction with one of our switch cabinet modules.
USB to encoder conversion on request.
16
SSI - parallel converter PU 10
Converts absolute position and CAM signals from SSI interface to parallel
output bits with max. 32 bit.
TR-Nr. 491-00002
SSI-display ADP 200
Displays absolute position information. Available as both single and
double channel version. With the double channel version, positions can be
shown separately, alternating or the difference/sum of both.
Programmable with TR-WINprog via IrDA adapter.
Switch cabinet module
The perfect aid for transparent encoder cabling.
Correct grounding of signal wires and easy connection to our programming adapter.
Module 15/2 (SSI + programming wires) TR-Nr: 490-00105
Module 6/1 (only programming wires) TR-Nr: 490-00101
Pulse divider for incremental encoders
For incremental encoder signal processing (and incremental tracks of our
absolute encoders) we offer a wide range of pulse dividers and signal
distributors such as the IT 10. It has one incremental input (A, A neg., B,
B neg., Z, Z neg.) and two divided, adjustable outputs.
The voltage level of input and output signal can be adjusted to the
application (5V or 11 to 27 V). TR-Nr. 490-00009
Devices shown
are a selection from
our product range
Mechanical accessories
Coupling
If selected and mounted correctly, CPS-couplings protect the encoder shaft
from, other than rotation, vibrations and shaft movement.
Other accessories on request
Additonal options (please indicate when ordering) :
In addition to the possibilities shown, we can customize the encoder
to your needs, for example with:
· EX housing
· protection housing
· stainless steel encoder
· cable lengths (with cable gland)
· different connectors
(Contact, Binder etc., M12 with field bus end-cap)
· string pot
· impermeable to oil
Some of these options require larger housings.
Example: protective housing
17
Explosion Proof Encoders
According to ATEX
AEV 70
18
Field of application
This type is suitable for applications in surroundings with permanent or
temporary explosive atmospheres classified as zones 1, 21, 2 and 22. Inside
the protective housing there is whether an absolute encoder from our
series CE_58 or an incremental encoder from our series IE_58.
There are limitations concerning flange/shaft and connection technology. Please ask for particular case.
Available explosion-proof
certificates
II 2 G/D EEx de IIC T6 for gas / dust atmospheres, certificate PTB 03 ATEX 1051
Protection class
IP 66
Maximum rotation speed
6000 1/min (with T6)
Shaft / flange options
Flange ZB 36, shaft 10 round 20mm long or Flange ZB 45, shaft 12 with groove, 24 mm long
Connection
10 m cable, 16 pin, open end + PE-clamp at the housing, axial cable gland
Respect legal regulations for planning and use of this device!
Devices shown
are a selection from
our product range
EEx-housing with flange ZB 36 and shaft 10 GL / 20
19
Please ask for detailed drawings for your machine design!
EEx-housing with flange ZB 45 and shaft 12 with groove/24
ATEX-Denominator
II 2 G/D EEx de IIC T6
T6
gases with ignition temperature of more than 85 °C
d
protected by pressure proof encapsulation
EEx
certified respecting european standards and regulations
G ... IIC
gases with explosion class IIC (highest class)
D
dusts
2
for use in zone 1, 21 as well as 2 and 2,2
II
device for „over ground“ operation
Processing Drive encoTRive MD
Acuating Drive
Progress - decentralized und intelligent
into the future
from
P
5000 1/min pro s
20 ms
1-2°
without
1500 h
20
Greater variety of products, smaller batch sizes
and individualization of production are the
main requirements of progressive machines.
In order to fulfill these demands, whilst market prices are static or even shrinking, and per-
... as auxiliary drive for ...
- adjusting dimensions
- adjusting bearings
- adjusting stops
- adjusting ventiles, hatches
and sliders
sonnel costs are rising, automation technology
must be used exhaustively. It must go beyond
the actual production process and enter secondary functions such as setup and material
supply tasks. At this point encoTRive fills the
gap between fieldbus and drive technology:
... to use in ...
- folding machines
- thermoforming machines
- cardboard gluing machines
- component mixing systems
It is a compact device containing motor, converter, fieldbus communication, position closedloop controller and an absolute measuring
system as well as optional I/Os and optional
brake.
Devices shown
are a selection from
our product range
MA 025
e
Performance
Positioning Drive
Processing Drive
up to
Controller structure
Dynamics
Real time
Accuracy
Inputs and outputs
Lifespan
... as auxiliary or main drive for ...
- cyclic format adjustments
- dynamic rough settings
- fine adjustments
- even speed
... to use in...
- wood working machines
- package ejection machines
- profile measuring machines
- X-ray analyzing devices
MP 200
PID
10 000 1/min pro s
2 ms
20 arcmin
programmable
30 000 h
21
... as main drive for ...
- precise positioning
- a synchronized and cyclic transfer
- sensor coupled position measurement
- application optimized portal systems
... to use in ...
- accurate grinding machines
- inspection machines
- tool controlling modules
- tire testing facilities
MD 070
MD 300
www.tr-electronic.de
Linear encoders
Storage and logistics
LE 200
LLB 60 D
Laser range finder
Laser range finder without reflector
0,2... 125 m, 0,2... 200 m absolute,
0,05... 65 m absolute
22
Measuring / Transmission range
others on request
Resolution
0,1 mm
0,1 mm
Programmability
via PC, TRWinProg
via PC
fieldbus
Interfaces available
SSI
RS 232, RS 422, analog 0 (4)..20mA,
Profibus-DP
3 digital outputs;
Profibus+SSI
fieldbusses and SSI in preparation
CANopen, DeviceNet
Interbus-S
others on request
Supply
18... 27 V DC, < 6 W (typ.)
Protection class (DIN 40 050)
Operating temperature
General description
IP 65
0... +50 °C
-10... +50 °C
-30... +50 °C optionally
-40... +50 °C optionally
Absolute position measurement of
Absolute position measurement for
high-level rack and transportation
short measuring distances with
devices, non-contact and perfect for
quasi-static targets.
closed-loop control due to the short
cycle time.
Devices shown
are a selection from
our product range
9...30 V DC, typ. 0,5 A
ID 200
BE 90
wireless fieldbus transmission for
contact-free, barcode based absolute
storage and logistic
measuring system for storage and
logistic
23
120 m, 200 m
9999 m absolute
others on request
± 1 mm (switchable to ± 2 mm)
via PC, BE-configuration
Profibus
Profibus (DP, FMS, MPI) up to 1,5
SSI
MBit, CANopen, DeviceNet,
Profibus-DP
Interbus S 500 kBit / s (copper)
Interbus S 2 MBit / s (LWL),
Rockwell (DH+, RIO), Ethernet
RS 422, RS 485 on request
10... 30 VDC
IP 65
-10... +50 °C
0... +40 °C
-30... +50 °C optional
-30... +40 °C optional
The perferct addition to our contact-
The barcode based absolute
free measuring system.
measuring system BE 90 solves
even complicated measuring tasks
in storage and logistics, especially
suitable for systems that move in
curves.
Linear encoders
Linear absolute distance measurement
LA 41 / LA 42
LA 46
Linear absolute distance measurement
The universal standard for installation
system for integration in hydraulic
in cylinders
cylinders or for general applications
24
Measuring range
100... 4000 mm
50... 4000 mm
> 4000 mm on request
> 4000 mm on request
Resolution
0,01 mm
0,005 mm
Programmability
via PC, EPROG
via PC, TR-WINProg
fieldbus
fieldbus
Interfaces available
Supply
synchronous serial
synchronous serial
analog (U,I)
analog (U,I)
incremental serial
Profibus DP (address display,
start stop
externally viewable)
CANopen
CANopen
DeviceNet
DeviceNet
24 V DC -20%, +10% < 4 W (typ.)
Protection class (DIN 40 050)
up to IP 65, according to specifications
Operating temperature
General description
0... +70 °C
As sensor electronics and interface
The new, universal LA 46 is
are placed in the same housing, the
mechanically compatible to most
LA 41/42 is the perfect all-in-one-
commercial absolute position
device. Two basic types of flanges
measurement systems and therefore,
enable installation in almost any
perfect for new builds or retrofitting.
commercial hydraulic cylinders.
Devices shown
are a selection from
our product range
24 V DC -20%, +10% < 5 W (typ.)
LA 66
LA 80
Linear absolute measuring system
Linear absolute measuring system
that meets every demand for almost
for harsh environments with float for
every interface
level measurement
25
100... 4000 mm
> 4000 mm on request
0,01 mm
via PC
fieldbus
synchronous serial, analog (U,I)
synchronous serial
asynchronous serial, parallel, cams,
analog (U,I)
start stop, high speed asychronous
serial, optical waveguide, FIPIO,
Profibus DP, Interbus-S, EtherCAT,
Powerlink
24 V DC -10%, +10% < 5 W (typ.)
up to IP 65, according to specifications
0... +70 °C
Due to the spacious housing, the
Due to the PE (optional PTFE) casing,
LA 66 also supports those interfaces
the LA 80 is perfectly suitable for
that more compact devices can not
the food, paper and electroplating
use.
industry. Please ask for the chemical
resistivity list.
Linear encoders
Linear absolute distance measurement continued
LP 38
LP 46
LMP 30
Linear absolute measurement system Same interfaces as the standard
Cost-effective measuring system in ex-
in extruded aluminium housing for
LA 46, but in extruded aluminium
tra flat extruded profile housing. SSI or
mechanical engineering applications
housing
analog interface and standard lengths
100... 4000 mm
50... 4000 mm
50... 4000 mm
> 4000 mm on request
> 4000 mm on request
> 4000 mm on request
Resolution
0,05 mm
0,005 mm
0,05 mm
Programmability
TRWinProg, PT100
TRWinProg, PT100
fieldbus
fieldbus
synchronous serial, analog (U,I)
synchronous serial
synchronous serial
incremental serial, asynchronous
analog
analog
26
Measuring range
Interfaces available
serial, start stop, high speed asychro- Profibus DP (address display,
nous serial,
externally viewable)
Profibus DP, CANopen, DeviceNet,
CANopen
start stop
DeviceNet
Supply
24 V DC -20%, +10%
Protection class (DIN 40 050)
IP 65, je nach Ausführung
Operating temperature
-20... +70 °C
General description
The multi-magnet option (available
Mechanically compatible with
As the magnet is moved outside the
for CAN and Profibus) enables
various systems due to adjustable
measuring system, the sensing tech-
measurement of up to 16 (Profibus
mounting clamps.
nology inside is safe from wear and
up to 12) positions at the same time.
24 V DC -20%, +10% < 4 W
24 V DC -20%, +10% < 4 W
IP 65
0... +70 °C
friction. Thanks to the extremely flat
extruded profile housing, chips or
production waste can‘t get caught.
Devices shown
are a selection from
our product range
LMP 30
(Bus)
Linear absolute transformation measurement
LT S
LT PI
LT RV
Friction and wear-free measuring
High-resolution absolute position
High-resolution absolute
High-resolution absolute position
system with fieldbus interface in ex-
measurement system with moving
measuring gauge for industrial
measurement system in heavy-duty
tra flat extruded aluminium housing
measuring slide
applications
design
27
50... 4000 mm
140... 3040 mm
100 mm, 200 mm
100 mm, 200 mm
> 4000 mm on request
0,005 mm
0,1 µm
fieldbus
LTProg
Profibus-DP
SSI
EtherCAT
others via interface adapter
Powerlink
24 V DC -20%, +10%, < 4 W
11... 27 V DC
IP 65
IP 50
IP 65
IP 65
0... +70 °C
0... +40 °C
Industrial Ethernet directly to the
Our LT S system is especially suitable The LT PI enables absolute distance
The LT RV is the LT- PI‘s big
sensor. Quick and real-time data
for large measuring ranges with
measurement with a resolution
brother, especially designed for
transmission by EtherCAT protocols.
high demands on accuracy. Several
of microns even in industrial
applications directly on automatic
measuring heads can be used in
environments and/or running
roller lines and the like - that means
one system, e.g. for precise multi-
production processes.
everywhere absolute measurement
-10... +60 °C
blade adjustment in paper cutting
with a resolution of microns is
machines.
required in heavy industry.
Systems
Features
Industrial PC
epc
MIPC
MCC
PC power in panel housing with
The modular ultimate of automation
Processing power for detached
integrated fieldbus and shock proof
with front panel and shock proof
mounting - also in stainless steel
mounting
mounting
housing for food industry
12´´... 17´´
10,4´´... 15´´
800 x 600... 1024 x 786
640 x 480... 1024 x 786
28
Display
CPU/ slots
ISA, PISA, PCI according to specifications
RAM
64 MB
optional 128, 256 MB
optional up to 512 MB
Drives
hard disk 3,5´´
all commercial 3,5“ PC drives can
flash disk instead of hard disk
be integrated
others on request
RAID-Module
optional FD, CD (slim size)
Keyboard
only external keyboard possible
short stroke keyboard
touchscreen
ABCD, QWERTZ and others
F-keys, optional S-keys
finger mouse, touchscreen optional
Interfaces
Dimensions
Supply
PC standard interfaces
B 350 x H 266... B 451 x H 320
19´´, spec. dim., e.g. B 334 x H 504
B 19´´ x H 4 units
6 kg... 9 kg, frontal IP 65
13 kg... 21 kg, frontal IP 65
19 kg... 20 kg
24 V DC
120/240 V AC 50/60 Hz switchable
typical 40 W
24 V DC
typical 150 W... 230 W
UPS as an option
150 W, 200W as an option
alternatively 24 V DC, 200 VA,
UPS as an option
General description
Devices shown
are a selection from
our product range
As fieldbus interfaces can be
The integrated solution for
The traditional PC solution with
integrated, it is the perfect control
visualization and efficient control
detached display. Perfect as
PC and operating panel.
platforms.
production server.
Displays
edsp
Features
Displays for high industrial
demands
29
Display
10´´... 19´´
640 x 480... 1024 x 786
TFT display with backlight,
touchscreen as an option
Interfaces
VGA
optional digital DisplayNet, LVDS
or RGB
others on request
Dimensions
B 300 x H 220... B 420 x H 320
5 kg... 6 kg
Supply
24 V DC
General description
Visually, the edsp displays perfectly
match the epc series of panel PC‘s.
Due to the various interface options,
this display is in high demand for
replacement devices and refitting.
Using the innovative DisplayNet
technology, several displays can be
run over extended distances from a
single host.
Systems
@ctiveIO
Modern plants and machine concepts use decentralized automation systems. TR Systemtechnik consistently supports
a broad product range for automation engineering. A prime example is the legendary FOX-series closed-loop
controller. It is one of the most universal application devices available, especially in hydraulics and materials
handling.
Efficient fieldbusses and Industrial Ethernet expand the possibilities for even more modular plant and machine
30
designs with ever more intelligence going directly into the field. We service these trends and customer requirements
with @ctiveIO. We have put all our experience and knowledge of industrial electronics, fieldbus and communication
technology into the @ctiveIO system - completely „made by TR Systemtechnik“.
In order to meet the different requirements of large scale and special machine production, we offer @ctiveIO in
two hardware designs that are compatible with each other. For limited quantities and individual nodes you combine
@C controller and @M I/O-modules yourself. For large quantities we deliver completely configured nodes of @C and
@X I/O-modules in a common housing. You only order one article and can be sure you always get the node with the
same configuration.
Software
As we already mentioned, @ctiveIO has more to offer than mere fieldbus communication. You yourself can create
and expand the nodes‘ function using our software modules or programs.
@CAM - High-speed applications demand fast control information. @CAM can transfer encoder generated CAM
values to several @IO modules via the bus.
@AXIS - The successor of the universal closed-loop controller FOX-AXIS. One @AXIS controls up to eight electrical
or hydraulic axes, even with switchable parameter values (e.g. distance/pressure control).
@PLC - Especially for decentralized control engineering to relieve higher level controls and make plants more
modular. @PLC - integrates itself control-side like a simple fieldbus node (adjustable width in fieldbus), but can itself
process local I/O-signals without fieldbus involvement.
@CUST - Here it‘s up to you. With our support you can back up your individual control and closed-loop control code
in our modules.
Devices shown
are a selection from
our product range
@M
The key parts of any system are versatile I/O modules. As they are modular, @M and @X, with an accuracy of 1
byte, can achieve your individual configuration. You can select from standard industrial interfaces, such as digital or
analog inputs and outputs, measuring systems and power distribution clamps. That enables flexible and compact
solutions. Two types that meet your requirements:
31
If you use configurations that differ a lot, we deliver the modules in separate housings. When customized and
installed on the mounting rail, the @M are electrically and mechanically safely connected.
If you use @ctiveIO-nodes in series production machines or modules, we match the nodes for you according to
your individual needs. These @X are placed in a common housing, with the same mechanical characteristics as the
single type. Therefore, only one compact assembly for your installation and startup. Additional @M-modules can
be coupled to those prefabricated @X-modules.
@C
The core of the decentralized intelligence is the controller module. It connects the communication technology
(fieldbusses, partly Ethernet) with the I/O-level. In addition to the mere transmission of information between
fieldbus and I/O-modules, the controllers also take on control and closed-loop control tasks independently. As these
software modules make different demands on the hardware, we offer three basic types:
@C100 - The fieldbus node. With the fieldbus-node @C100 you bring all your I/O-data to the bus.
@C200 - Industrial Ethernet on board. In addition to the traditional fieldbus interface the @C100‘s big brother
also offers Ethernet and thanks to our modular architecture we can accomodate existing and future standards.
@C500 - PC power in the field. For applications with high demands on power we offer you a full industrial PC for
snap-on, mounting rail fitting. In addition to the I/O-module interface, it also has all standard PC interfaces, such as
LPT, COM, keyboard, mouse, VGA and Ethernet. Due to the open PC104-based configuration other interfaces, such
as fieldbus master, are easy to achieve.
Systems
Bus terminal
32
The universal basic element for automation
The bus terminal is an open and fieldbus-neutral periphery concept consisting of electronic terminal blocks. The head of an electronic terminal block is the bus
coupler fieldbus interface. Bus couplers are available for Lightbus, Profibus-DP/FMS, Interbus, CANopen, DeviceNet, ControlNet, Modbus, SERCOS interface,
RS 232/ RS 485, Ethernet TCP/IP or USB, and new: EtherCAT.
One bus coupler supplies up to 64 electronic terminal blocks for any form of signals. The terminal blocks are clipped onto the bus coupler and connected
by simply latching together, without further movement. The I/O-level can be built up uniformly based on the electronic terminal blocks and still remains
fieldbus-neutral.
Simple and space-saving
The bus terminal ensures that switch cabinets and terminal boxes are constructed more economically. It is no longer necessary to wire the field devices
between the first terminal connection in the control cabinet or in the terminal box and the controller. Therefore terminal boxes and especially switch cabinets
get smaller and more reasonable. Installation and wiring of the bus terminal is thus simple and compact like that of a standard terminal block. The bus
terminal can be connected to the controller by connecting a bus coupler via the fieldbus as required.
The bus terminal has been highly successful in various industrial sectors using automation systems, such as automotive and manufacturing industry,
mechanical engineering, materials handling and environmental technology.
Free mix of signals
The bus terminal components enable users to operate mixed signals without restriction at each station. This means that a single non-central input/output
node can map all the necessary signals. Besides digital I/O terminals there are also terminals available for analog signals or current and voltages with
standardised signal levels and for the PT100. Intelligent devices can be connected via bus terminals with serial interfaces in accordance with RS 232 C,
RS485 or 20 mA TTY.
Devices shown
are a selection from
our product range
Slot-PLC
The happy medium
The TR Systemtechnik slot-PLC combines the stability of a hardware PLC with the easy visualization options of a
software PLC.
In the past, industrial PC‘s, in combination with conventional PLC‘s, were mainly used for visualization tasks.
The critical point concerning visualization has always been the serial and/or network connection. The classical
PLC becomes redundant when its functions are integrated into an industrial PC. I/O-modules are connected
via fieldbusses, such as Profibus-DP, Interbus-S, CANopen, DeviceNet or LightBus. The data for visualization are
transmitted quickly via the ISA and/or PCI-bus of the industrial PC, where up to six slot-PLCs can be integrated.
Clear task sharing
Within a plant the host CPU takes on the visualization, whereas the slot-PLC takes on control and closed-loop control
tasks. The strict separation of functions increases the transparency of control tasks and contributes significantly
to the system‘s stability. Slot-PLC and host CPU communicate via a decoupled DP-RAM. The visualization cannot
directly influence the PLC program. Even a complete crash of an application on the host PC does not interfere directly
with the control on the slot-PLC.
As programming languages, S5/S7 and IEC 61131 are available. No matter what fieldbus and host bus have been
chosen, the PLC programs can always be used. Only the bus configuration must be adjusted accordingly.
A special feature is the programmability via Ethernet, which enables centralized supply of programs for networked
controls.
For plant safety the SPC can be provided with a buffered RAM which permanently retains data even after power
failure. In addition, a UPS card can be integrated in order to keep the controller running.
Technical data
According to its instruction set, the SPC is compatible to S7 416 or S5 945. A Siemens-PG with Simatic Manager can be used as a programming unit. Of
course other programming systems for S5/S7 can also be used . The connection to the programming system is established either by MPI via RS 232 or by
MPI via Ethernet. The SPC operates with a Geode 300 MHz as well as other CPUs and does not require a fan.
(S5, S7: registered trademarks of Siemens AG)
33
TR-products in application
Examples of possible applications
Storage and logistics
Powerful, decentralized measurement and control systems, with simple commissioning and
set-up, are crucial for modern, automated storage and logistics equipment, such as aisle stackers, transfer runways and crane installations.
34
Packaging industry
Devices shown
are a selection from
our product range
www.tr-electronic.de
Solutions for control equipment, adapted to customers‘ needs, are the intelligent base for successful machine design
in the packaging industry. High processing speed is required for short lead
times and high production runs.
Absolute sensors no longer require time
costly referencing as intelligent, highly
integrated sensor technology reduces
the volume of the machines and removes load from the master control.
For applications with high demands on
accuracy we especially find a suitable
solution. In the past that was only a
distant hope.
Metal processing
For a long time, the sheet metal working industry has been a TR-Electronic speciality field. As
this industry has very particular requirements,
our products are designed for heavy-duty applications even from the initial development stage
on. TR-Electronic - that‘s years of experience in
vibration and shock!
35
Woodworking
Intelligent, decentralized control technology,
powerful sensors with integrated signal processing and components that work reliably despite
great variation in temperature and vibration,
are the basis for automation solutions for the
woodworking industry. Providing automatic transfer facilities on working machines or
assembly cells with intelligent systems is our speciality - and especially if you are looking for a
platform for your particular machine philosophy
or a very particular function.
TR-Electronic –
Your Partner in Automation
Programmable Absolute Fieldbus Encoders
The standard in automation technology, it is available for all
commercial fieldbus systems such as Profibus, Interbus,
CANopen, DeviceNet; Industrial Ethernet and Profinet.
This includes TR`s standard range of
interfaces, mechanical and functional options.
36
Linear Absolute Displacement Sensors
The compact class for linear absolute measurement.
Directly bus-ready, suitable for harsh environmental
conditions and for installation in hydraulic cylinders.
Absolute High
Resolution Linear
Measurement Systems
Linear measurement with
absolute, sub-micron
resolution without
referencing.
Incremental Encoders
from 35 mm external
diameter up to 55 mm
hollow shaft - we always
have a solution!
LASER-Distance Measuring Systems
Absolute and wear-free measurement of
distances up to 200 m via SSI or fieldbus.
Devices shown
are a selection from
our product range
Intelligent Positioning Drive
Absolute positioning directly via fieldbus.
Integrated motor, power amplified position control-loop
controller, absolute encoder, PLC functions and fieldbus
interface.
Heavy-Duty Industrial PC
Double shock proof mounted housing isolates the electronics
from vibration, while front access (MIPC) simplifies
configuration and start up.
Choose from our wide selection of housings.
Motor Feeback Systems
Feedback encoder for modern
positioning drives. Optionally
integrated or directly mounted
on the drive shaft via hollow
shaft.
SPC - The PLC for PC
Turns every PC into an
efficient PLC under S5/S7 or
IEC 1131 protocols. Combines
the comfort of PC control
with the safety of a separate
processor for PLC tasks.
@ctiveIO - More Than Fieldbus Modules
Modular, rugged fieldbus node system
I/O-node, small-scale PLC, decentralized axis controller, high
performance cam controller, DIN-rail mounted industrial PC,
servo controller for the hydraulic ...
with commercial fieldbus systems, such as, Profibus-DP,
CANopen, DeviceNet, LightBus ... and ETHERNET as option!
37
Worldwide presence
Germany
Argentina
France
TR-Electronic GmbH
Eglishalde 6
D-78647 Trossingen
Tel.: +49 / 7425 228 0
Fax: +49 / 7425 228 33
info@tr-electronic.de
AEA Aparátos Eléctricos Automáticos
S.A.C.I.E./ Asunción 2130
AR-1419 Buenos Aires
Tel.: +54 / 11-4574 1155
Fax: +54 / 11-4574 2400
servicioalcliente@aea.com.ar
TR Competence Center West
Iserlohn
Albecke 6
D-58638 Iserlohn
Tel.: +49 / 2371 15956 - 0
Fax: +49 / 2371 15956 - 29
info@tr-electronic.de
Australia
TR-Electronic France SARL
56 Boulevard du Courcerin Bât. 16
ZI. Pariest-Marne La Vallée
F-77183 Croissy-Beaubourg
Tel.: +33 / 1-64 62 13 13
Fax: +33 / 1-64 62 20 02
info@tr-electronic.fr
www.tr-electronic.fr
Sensor Measurement Pty Ltd.
Unit 8/ 26 Shields Crescent
P.O. Box 1079
AU-Booragoon
Western Australia 6154
Tel.: +61 / 8-93 17 25 52
Fax: +61 / 8-93 17 24 52
sales@sensormeasurement.com.au
Belgium
Martek SPRL - BVBA
Avenue René Comhaire 82
BE - 1082 Bruxelles
Tel.: +32 / 24 67 00 40
Fax: +32 / 24 67 00 49
info@martek.be
www.martek.be
Brazil
C+Tecnologia
Avenida Pedroso de Morais, 433 -13°andar
CEP-05419-000
BR-Pinheiros - São Paulo -SP
Tel.: +55 / 11-2168 6554
Fax: +55 / 11-2168 6555
info@ctecnologia.com.br
www.ctecnologia.com.br
China
Great Britain
TR-Controls Ltd.
12a Oak Industrial Park
Great Dunmow
GB-Essex CM6 1XN
Tel.: +44 / 1 371-876 187
Fax: +44 / 1 371-876 287
alan@trcontrols.co.uk
www.trcontrols.co.uk
India
Global-Tech (India) Pvt Ltd
404 White House
1482 Sadashiv Peth
IND-Tilak Road, Pune - 411 030
Tel.: +91 / 20- 2447 00 85
Fax: +91 / 20- 2447 00 86
info@globaltechindia.com
Israel
DOR Drive Systems L.T.D.
P.O.Box 6
ISR-49910 Kibbuz Einat
Tel.: +972 / 3 9007595
Fax: +972 / 3 9007599
sales@dor1.co.il
www.dor1.co.il
TR-Electronic GmbH Shanghai Rep. Office
Room 1002, Part-C, Orient International Plaza
No. 85 Lou Shan Guan Road,
Hongqiao Developing Zone
CN-200336 Shanghai, P.R. China
Tel.: +86 / 21 - 6278 7611
Fax: +86 / 21 - 6278 7629
tr-electronic@online.sh.cn
Italy
Denmark
Japan
Telestar S.r.l.
Via C. Colombo 13
I-22069 Rovellasca (Co)
Tel.: +39 / 02-96 74 02 68
Fax: +39 / 02-96 74 02 73
telestar@telestar-automation.it
www.telestar-automation.it
TR-Electronic Danmark ApS
Hustedgårdvej 22
DK-8722 Hedensted
Tel.: +45 / 75 89 06 03
Fax: +45 / 75 89 06 36
cbj@tr-electronic.dk
www.tr-electronic.dk
SANTEST CO. LTD.
2-51, Shimaya 4-Chome
Konohanaku
J-Osaka 554-8691
Tel.: +81 / 6-6465 5561
Fax: +81 / 6-6465 5921
info@santest.co.jp
Finland
Canada
Sarlin Oy. E. AB
Kaivokselantie 3-5
SF-00101 Helsinki 10
Tel.: +358 / 9-504 441
Fax: +358 / 9-563 3227
myynti.automaatio@sarlin.com
www.sarlin.com
TR Electronic
P.O. Box 2543, Station B
CDN-London, Ontario Canada N6A 4G9
Tel.: +1 / 519-452 1999
Fax: +1 / 519-452 1177
customercare@trelectronic.com
www.trelectronic.com
Mexico
Singapore
Turkey
Netherlands
Slovenia
TR-Electronic Nederland BV
Postbus 1682
NL-6201 BR Maastricht
Tel.: +31 / 43 352 3614
Fax: +31 / 43 352 3555
info@tr-electronic.nl
www.tr-electronic.nl
S.M.M. d.o.o.
Jaskova 18
SI-2001 Maribor
Tel.: +386 / 2450 2300
Fax: +386 / 2450 2302
smm@siol.net
www.smm.si
USA (TR-Electronic)
Austria
Spain, Portugal
USA (TR-Systemtechnik)
TR-Electronic GmbH
Tragösserstraße 117
A-8600 Bruck/Mur
Tel.: +43 / 38 62-5 50 06 0
Fax: +43 / 38 62-5 50 06 33
info@tr-electronic.at
www.tr-electronic.at
Intertronic Internacional, SL
C/Johannes Gutenberg, 4 y 6
P.l. Parque Tecnológico
E-46980 Valencia
Tel.: +34 / 96-375 8050
Fax: +34 / 96-375 1022
info@intertronic.es
www.intertronic.es
TRS Fieldbus Systems, Inc.
2619 Product Dr
US-Rochester Hills, MI 48309
Tel.: +1 / 586 826-9696
Fax: +1 / 586 826-8899
support@trs-fieldbus.com
www.trs-fieldbus.com
TR Electronic
P.O. Box 2543, Station B
CDN-London, Ontario Canada N6A 4G9
Tel.: +1 / 519-452 1999
Fax: +1 / 519-452 1177
customercare@trelectronic.com
www.trelectronic.com
Poland
Stoltronic-Polska Sp. z o.o
ul. Dabrowskiego 238C
PL – 93-231 Lodz
Tel.: +48 / 42-649 12 15
Fax: +48 / 42-649 11 08
stoltronic@stoltronic.pl
www.stoltronic.pl
Saudi Arabia
Business Tribune Est.
Prince Naif Bin Abdul Azeez Street,
Pearls Business Complex, 2nd Floor
P.O. 11317
Dammam 31453
Tel.: +966 / 3-832 72 17
Fax: +966 / 3-832 72 41
ayaz@bustribune.com.sa
Sweden
TR Electronic Sweden AB
Enebybergsvägen 10B
S-182 36 Danderyd
Tel.: +46 / 8-756 72 20
Fax: +46 / 8-756 76 80
mailbox@trelectronic.se
www.trelectronic.se
Switzerland
TR-Electronic SA
14, Ch. Pré-Fleuri
CH-1228 Plan-les-Ouates/Genève
Tel.: +41 / 22-7 94 21 50
Fax: +41 / 22-7 94 21 71
info@tr-electronic.ch
www.tr-electronic.ch
Globaltec Electronics (Far East) Pte. Ltd.
50 Bukit Batok Street 23
#06-27 Midview Building
SIN-659578 Singapore
Tel.: +65 / 6267 9188
Fax: +65 / 6267 8011
globaltec@pacific.net.sg
South Africa
Siemens VAI Metals Service (Pty) Ltd.
Detek After Sales Service
19 Tom Muller Road
P.O. Box 793
SA-Meyerton 1960
Tel.: +27 / 16 3620300
Fax: +27 / 16 3620725
info@vaindserv.co.za
Üniversa Iç-Dis Tic. ve Mak. San. Ltd. Sti.
Cemal Gürsel Caddesi No: 11 D:4
35600 Karsiyaka-IZMIR / Türkiye
Tel.: +90 / 232 - 382 23 14
Fax: +90 / 232 - 382 23 24
info@universa.com
www.trelectronic.com.tr
TR Electronic
P.O. Box 4448
US-Troy, MI 48099
Tel.: +1 / 248-244-2280
Fax: +1 / 248-244-2283
customercare@trelectronic.com
www.trelectronic.com
Eastern Europe, GUS
Stoltronic Handels GmbH
Karl-Kurz Gasse 21
A-2482 Münchendorf
Tel.: +43 / 2259 30133
Fax: +43 / 2259 30149
stoltronic@aon.at
South Korea
MS Intech Co., Ltd.
Gochon Bd. #226, Yeongdeungpo-dong 2ga 94-121
Yeongdeungpo-gu
COR-Seoul
Tel.: +82 / 2-334 0577
Fax: +82 / 2-862 1591
sales@msintech.com
Thailand
T+R Electronic (Thailand) Co., Ltd.
354/14 M.12 Nongprue Banglamung
TH-20260 Chonburi
Tel.:+66 / 38 364 788
Fax:+66 / 38 364 789
trthailand@trelectronic.co.th
www.trelectronic.co.th
Czech Republic, Slovakia
DEL a.s.
Strojírenská 38
CZ-59101 Ždár nad Sázavou
Tel.: +420 / 566 642 257
Fax: +420 / 566 621 657
del@del.cz
www.de.cz
Adr: 03/07
group
sensors
motion
Angular measurement
Compact drives
systems
controls
Fieldbus I/Os
Programmable
logic controller
Displacement
measurement
Application modules
Integrated controller
for hydraulics
Industrial PCs
Axis controller
Cam controller
Condition monitoring
Sensors for stamping
and metal forming
machines
Measurement and
control systems for
stamping and metal
forming machines
Process
optimization
and monitoring
tools
TR-Electronic GmbH
TRsystems GmbH
Eglishalde 6
78647 Trossingen
Tel.: +49 (0) 7425 - 228 0
Fax: +49 (0) 7425 - 228 33
info@tr-electronic.de
Eglishalde 16
78647 Trossingen
Tel.: +49 (0) 7425 - 228 0
Fax: +49 (0) 7425 - 228 34
info@trsystems.de
www.TRgroup.de
Copyright by TR-Electronic · All rights reserved · 68-105-001 October 09
Download PDF
Similar pages