Owner’s Manual
AV Receiver
English
CONTENTS
INTRODUCTION
Features and capabilities ................................................... 3
About this manual............................................................. 4
Supplied accessories......................................................... 4
Part names and functions.................................................. 5
Front panel........................................................................ 5
Rear panel......................................................................... 6
Front panel display ........................................................... 7
Remote control ................................................................. 8
CONNECTIONS
Connecting speakers .......................................................... 9
Speaker channels and functions........................................ 9
Speaker layout ................................................................ 10
Connecting speakers and subwoofer .............................. 11
Connecting external components.................................... 14
Cable plugs and jacks ..................................................... 14
Connecting a TV monitor............................................... 15
Connecting BD/DVD players and other devices ............ 17
Connecting video cameras and portable audio players .. 21
Transmitting input A/V to external components ............ 21
Connecting the FM/AM antennas .................................. 22
Set up the speaker parameters automatically
(YPAO) .............................................................................. 23
PLAYBACK
Basic playback procedure ............................................... 28
Adjusting high/low-frequency sound (Tone control) ..... 28
Changing input settings with a single key
(SCENE function) ............................................................ 29
Registering input sources/sound field program .............. 29
Enjoying sound field programs....................................... 29
Selecting sound field programs and sound decoders...... 29
Sound field programs ..................................................... 32
FM/AM tuning ................................................................. 34
Selecting a frequency for reception (Normal tuning)..... 34
Registering and recalling a frequency (Preset tuning) ... 35
Recalling a preset station................................................ 37
Clearing preset stations .................................................. 37
Radio Data System tuning
(U.K. and Europe models only) ..................................... 37
Playing back tunes from your iPod™/iPhone™ ........... 39
Connecting the Yamaha iPod universal dock ................. 39
Controlling an iPod™/iPhone™ .................................... 39
Playing back tunes from Bluetooth™ components....... 42
Connecting a Yamaha Bluetooth wireless audio
receiver ........................................................................... 42
Pairing Bluetooth™ components ................................... 42
Using Bluetooth™ components ..................................... 43
SETUP
Configuring the settings specific for each input source
(Option menu) .................................................................. 44
Option menu display and setup ...................................... 44
Option menu items ......................................................... 44
Setting various functions (Setup menu)......................... 48
Setup menu display and settings .................................... 48
Setup menu items ........................................................... 49
Manages settings for speakers........................................ 49
Setting the audio output function of this unit................. 53
Setting HDMI functions ................................................. 54
Making the receiver easier to use ................................... 57
Setting the sound field program ..................................... 58
Prohibiting setting changes ............................................ 58
Setting sound field program parameters ....................... 59
CINEMA DSP parameters ............................................. 60
Parameters usable in certain sound field programs ........ 60
Parameters usable in surround decoder .......................... 61
Registering remote control codes for external
component operations .................................................... 63
Resetting all remote control codes ................................. 64
Extended functionality that can be configured
as needed (Advanced Setup menu) ................................ 65
Displaying/Setting the Advanced Setup menu............... 65
Setting the impedance of speakers
(U.S.A. and Canada models only).................................. 65
Avoiding crossing remote control signals when using
multiple Yamaha receivers ............................................. 66
Changing FM/AM frequency steps
(Asia and General models only)..................................... 66
Initializing various settings for this unit ........................ 66
Using the HDMI Control function ................................. 67
APPENDIX
Troubleshooting ............................................................... 70
General ........................................................................... 70
HDMI™ ......................................................................... 73
Tuner (FM/AM) ............................................................. 73
iPod™/iPhone™ ............................................................ 74
Bluetooth™ .................................................................... 75
Remote control............................................................... 75
Glossary ............................................................................ 76
Audio information.......................................................... 76
Sound field program information................................... 77
Video information .......................................................... 77
Information on HDMI™................................................. 78
About trademarks ........................................................... 78
Specifications.................................................................... 79
Index ................................................................................. 81
Controlling other components with the remote
control ............................................................................... 62
Keys connecting external components ........................... 62
Default remote control code settings.............................. 62
En
2
INTRODUCTION
Features and capabilities
■ Built-in high-quality, high-power 5-channel amplifier
■ 1-button input/sound field program switching (SCENE function) .......................29
■ Speaker connections for 2- to 7.1-channel configurations
–
–
–
–
–
–
(U.S.A. and Canada models only) Speaker impedance configuration.....................................................12
Speaker channels and functions .................................................................................................................9
Speaker layout..........................................................................................................................................10
Speaker cable connection.........................................................................................................................11
Subwoofer cable connection ....................................................................................................................13
Using with 6.1/7.1-channel speaker layout..............................................................................................11
■ Acoustic parameter adjustment to match your speakers and listening
environment
– Automatic settings for speaker acoustic parameters
(YPAO - Yamaha Parametric Room Acoustic Optimizer).......................................................................23
– Specifying the settings for each speaker..................................................................................................49
– Volume control for each speaker..............................................................................................................51
– Speaker distance settings .........................................................................................................................51
– Sound quality control with the equalizer <Graphic Equalizer> ..............................................................51
– Test tone speaker adjustment ...................................................................................................................52
– Bass and treble level adjustment <Tone Control> ...................................................................................28
■ External component connection (max. 14 inputs) and playback
–
–
–
–
–
–
–
–
–
–
External component connection...............................................................................................................15
Audio signal output from the TV transmitted through the HDMI jack ...................................................56
HDMI/AV video input combining other audio input...............................................................................46
Correction of lag between audio and video signals <Lipsync>...............................................................53
Protective cover for front panel jacks ........................................................................................................4
Input source name changing <Input Rename> ........................................................................................57
Configuring the settings specific for each input source <Option menu> ................................................44
Playback from external components........................................................................................................28
Playback from an iPod/iPhone (iPod/iPhone and components sold separately) .....................................39
Playback from a Bluetooth component (Bluetooth and components sold separately) ............................42
■ HDMI settings
– Setting the HDMI functions.....................................................................................................................54
– Controlling this unit from HDMI compatible device such as TVs <HDMI Control function> ..............67
– Listening to TV audio with single HDMI cable connection <Audio Return Channel function>............69
■ FM/AM tuner
–
–
–
–
–
–
FM/AM broadcast listening .....................................................................................................................34
Simple preset tuning ................................................................................................................................35
(U.K. and Europe models) Radio Data System tuning ............................................................................37
(U.K. and Europe models) Automatic traffic information reception.......................................................38
Changing FM mode (Stereo/Monaural)...................................................................................................35
(Asia and General models only) Changing FM/AM frequency steps initializing various settings
for this unit...............................................................................................................................................34
■ Multi-channel, multi-format playback
–
–
–
–
–
–
–
Sound field effect selection......................................................................................................................29
Playback without sound field effects .......................................................................................................30
Stereo playback........................................................................................................................................30
Sound field effect configuration ..............................................................................................................59
Compressed-music playback ...................................................................................................................29
Setting the decode format of digital audio signals <Decoder Mode> .....................................................45
Selecting the 5.1-channel signal playback method <EXTD Surround>..................................................45
■ Front panel information display
– Front panel display information switching ................................................................................................7
– Front panel display brightness adjustment <Dimmer>............................................................................58
– Digital video/audio signal information display <Signal Info> ................................................................46
■ Volume adjustment functions
–
–
–
–
Easy listening at low volumes <Adaptive DRC> ....................................................................................53
Maximum volume settings.......................................................................................................................54
Startup volume settings............................................................................................................................54
Adjusting volume between input sources <Volume Trim> .....................................................................45
■ Remote control operation
– External component operation with this unit’s remote control................................................................62
– Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................66
■ Other features
– Standby mode after prolonged non-operation <Auto Power Down function>........................................58
– Standby mode after a specific amount of time <Sleep timer>...................................................................8
– (U.S.A. and Canada models only) To charge the iPod/iPhone when this unit is in standby mode
<iPod Standby Charge> ...........................................................................................................................41
– Initializing various settings for this unit ..................................................................................................66
– Prohibiting setting changes of this unit <Memory Guard> .....................................................................58
En
3
INTRODUCTION
Features and capabilities
About this manual
• Some features are not available in certain regions.
• This manual is created prior to production. Design and
specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and
product, the product has priority.
• “dHDMI1” (example) indicates the name of the parts on the
remote control. Refer to the “Part names and functions” (☞p. 5)
for the information about each position of the parts.
• J1 indicates that the reference is in the footnote. Refer to the
corresponding numbers on the bottom of the page.
• ☞ indicates the page describing the related information.
• Click on the “
” at the bottom of the page to display the
corresponding page in “Part names and functions.”
Front panel
Rear panel
Front panel display
Remote control
Supplied accessories
■ Attaching the VIDEO AUX input cover (supplied)
■ Installing batteries in the remote control
To protect against dust, attach the supplied VIDEO AUX input
cover to the VIDEO AUX jacks when you do not use the jacks.
To remove the cover, push the left section of it.
When inserting batteries in the remote control, remove the
battery compartment cover from the reverse side of the remote
control, and insert two AAA batteries into the battery
compartment so that they match with the polarity markings (+
and -).
a
Battery compartment
cover
c
b
Attach the cover
Battery compartment
Replace the batteries with new ones if the following symptoms
become evident:
• The remote control can only be operated within a narrow range.
• bTRANSMIT does not light up, or only lights dimly.
PUSH
NOTE
Check that you received all of the following parts.
•
•
•
•
•
•
Remote control
Batteries (AAA, R03, UM-4) x 2
YPAO microphone
AM loop antenna
Indoor FM antenna
VIDEO AUX input cover
Remove the cover
If there are remote control codes for external components
registered to the remote control, removing the batteries for more
than 2 minutes, or leaving exhausted batteries in the remote
control, may clear the remote control codes. If this should occur,
replace the batteries with new ones, and set the remote control
codes.
En
4
INTRODUCTION
Part names and functions
e MEMORY
Front panel
f
a A (Power)
Switches this unit between on and standby mode.
g
b HDMI Through/iPod Charge indicator
Lights up in any of the following cases while the unit is in standby
mode.
• When Standby Through function is enabled and audio/video from
an external component connected with HDMI is output to a TV
during the standby mode (☞p. 55). J1
• When an iPod is charging in the Yamaha iPod universal dock
during the standby mode (☞p. 41).
When the HDMI Control functions are “On” (☞p. 55), then
this stays on during standby mode.
h
i
j
k
l
c YPAO MIC jack
d
Connect the supplied YPAO microphone and adjust the speaker
balance automatically (☞p. 23).
INFO
Changes the information displayed on the front panel display (☞p. 7).
a
b
c
m
n SCENE
Registers FM/AM stations as preset stations (☞p. 36). J2
PRESET j / i
Selects an FM/AM preset station (☞p. 37). J2
FM
Sets the FM/AM tuner band to FM (☞p. 34). J2
AM
Sets the FM/AM tuner band to AM (☞p. 34). J2
TUNING jj / ii
Changes FM/AM tuner frequencies (☞p. 34). J2
Front panel display
Displays information on this unit (☞p. 7).
DIRECT
Switches this unit to direct mode (☞p. 31).
PHONES jack
For plugging headphones in. Sound effects applied during playback
can also be heard through the headphones.
INPUT l / h
Selects an input source from which to playback. Press either the left or
right key repeatedly to cycle through the input sources in order.
d e
f
g h
i
o
p
q
r
s
j
Switches the input source and the sound field program with a single
button (☞p. 29). When this unit is in standby mode, press this key to
switch on.
TONE CONTROL
Adjusts high-frequency/low-frequency output of speakers/headphones
(☞p. 28).
PROGRAM l / h
Switches between the sound field effect (sound field program) you are
using and the surround sound decoder (☞p. 29). Press either the left
or right key repeatedly to cycle through the input sources in order.
STRAIGHT
Changes a sound field program to straight decoding mode (☞p. 30).
VIDEO AUX jacks
For connecting video cameras, game consoles, and portable music
players to this unit temporarily.
Attach the supplied VIDEO AUX input cover when not using this
jack.
VOLUME
Adjusts the volume level.
k
YPAO MIC
DIRECT
INFO
MEMORY
PRESET
FM
AM
TUNING
VOLUME
SCENE
BD
DVD
PHONES
INPUT
TONE CONTROL
TV
CD
PROGRAM
RADIO
SILENT CINEMA
l
VIDEO AUX
STRAIGHT
PORTABLE
m
n o
p
q
VIDEO
L
AUDIO
R
r
s
J 1 : During the standby mode, you can select the HDMI input (HDMI1-4) to output to a TV. When the input is changed correctly, HDMI Through/iPod Charge indicator blinks twice.
J 2 : Usable when you have selected tuner input.
En
5
INTRODUCTION
Part names and functions
Rear panel
e AV OUT jacks
a DOCK jack
f
b
c
d
For connecting an optional Yamaha iPod universal dock (such as
YDS-12) or Bluetooth wireless audio receiver (YBA-10) (☞p. 39,
☞p. 42).
HDMI OUT jack
For connecting an HDMI - compatible TV to output audio/video
signals (☞p. 15).
HDMI1-4 jacks
For connecting external components equipped with HDMIcompatible outputs to receive audio/video signals (☞p. 17).
AV1-6 jacks
For connecting to external components equipped with audio/video
outputs to receive audio/video signals (☞p. 18, p. 19).
g
h
j SPEAKERS terminals
For outputting audio/video signals received when analog inputs (AV36 or AUDIO1-2) are selected (☞p. 21).
ANTENNA jacks
For connecting AM and FM antennas (☞p. 22).
AUDIO1-2 jacks
For connecting to external components equipped with analog audio
outputs to input sound into this unit (☞p. 20).
MONITOR OUT jacks
VIDEO jack
k
l
m
For connecting a TV capable of receiving video
input, and outputting video signals to it (☞p. 16).
For connecting TV that are compatible with
component video signals, using three cables to
output video signal (☞p. 15).
COMPONENT
VIDEO jacks
n
i AUDIO OUT jacks
For connecting the front, center, surround and surround back speakers
(☞p. 12).
SURROUND BACK jacks (PRE OUT)
Outputs the surround back L/R channel signals. You can enjoy the
maximum of 7.1-channels by connecting an external amplifier
(☞p. 11).
SUBWOOFER jack
For connecting a subwoofer with a built-in amplifier (☞p. 13).
VOLTAGE SELECTOR
(Asia and General models only)
Select the switch position according to your local voltage (Refer to
Quick Reference Guide).
Power cable
For connecting this unit to an AC wall outlet.
For outputting audio signals received when analog jacks, such as the
AV5-6 or AUDIO1-2 are selected (☞p. 21).
a
b
c
Distinguishing the input and output jacks
The area around the audio/video output jacks is
marked in white to prevent connection errors. Use
these jacks to output audio/video signals to a TV or
other external component.
SPEAKERS
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
FM
HDMI 2
HDMI 3
HDMI 4
FRONT
COMPONENT
VIDEO
COMPONENT
VIDEO
CENTER
SURROUND
GND AM
PR
PR
Output jacks
75ǡ
PB
PB
VIDEO
VIDEO
SPEAKERS
Y
Y
MONITOR OUT
(BD/DVD)
HDMI OUT
HDMI 1
ANTENNA
HDMI 3
HDMI 4
FRONT
COMPONENT
VIDEO
SINGLE
FM
HDMI 2
CENTER
SURROUND
GND AM
PR
75ǡ
PB
VIDEO
Y
MONITOR OUT
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
( TV )
AV 1
AV 2
AV 3
AV 4
SINGLE
AV 5
AV 6
AV
OUT
AUDIO 1
SURROUND BACK
AUDIO
OUT
AUDIO 2
SUBWOOFER
PRE OUT
AV 6
d
e fg
h
i
j
k
l
m
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
SURROUND BACK
SUBWOOFER
PRE OUT
n
En
6
INTRODUCTION
Part names and functions
Front panel display
g Cursor indicators
a HDMI indicator
h
b
c
d
e
f
Lights up during normal HDMI communication when any of the
HDMI 1-4 inputs are selected.
CINEMA DSP indicator
Lights up when a sound field effect that uses CINEMA DSP
technology is selected.
Tuner indicator
Lights up when receiving an FM/AM broadcast.
SLEEP indicator
Lights up when the sleep timer is on (☞p. 8).
MUTE indicator
Flashes when audio is muted.
VOLUME indicator
Displays the current volume level.
i
■ Changing the front panel display
Light up if corresponding cursors on the remote control are available
for operations.
Multi information display
Displays a range of information on menu items and settings.
Speaker indicators
Indicate speaker terminals from which signals are output.
The front panel can display sound field programs and surround
decoder names as well as the active input source.
Press fINFO repeatedly to cycle through input source →
sound field program → surround decoder in order. J2
Input source name
Subwoofer
Front speaker L
Surround speaker L
a
Surround back
speaker L
SW
C
Center speaker
L
R
SL
SR
SBL SB SBR
HDMI1
Front speaker R
VOL.
Straight
Surround speaker R
Surround back
speaker R
L
SL
SW
C
R
SR
Sound field program (DSP program)
Surround back
speaker J1
b
c
d
SLEEP
STEREO
TUNED
e
f
VOL.
MUTE
SW
C
L
R
SL
SR
SBL SB SBR
g
h
g
i
J 1 : “SB” is displayed when using a 6.1-channel configuration only.
J 2 : While selecting a tuner input, the FM/AM frequency is displayed instead of the input source.
En
7
INTRODUCTION
Part names and functions
a Remote control signal transmitter
Remote control
Transmits infrared signals.
b TRANSMIT
Lights up when a signal is output from the remote control.
a
c SOURCE A (SOURCE Power)
b
c
Switches an external component on and off.
CODE SET
TRANSMIT
n
SOURCE
RECEIVER
SLEEP
p
HDMI
1
2
3
4
3
4
o
1
d
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
e
FM
AM
PRESET
f
INFO
TUNING
TUNER
MEMORY
g
MUSIC
DIRECT
SCENE
h
BD
DVD
TV
CD
SETUP
RADIO
q
OPTION
i
VOLUME
ENTER
j
RETURN
POP-UP
MENU
TOP
MENU
MUTE
s
Sets the FM/AM tuner band to FM.
Sets the FM/AM tuner band to AM.
Presets radio stations.
Selects a preset station.
Changes tuning frequencies.
f INFO
Cycles the information displayed on the front panel display (the name
of the currently selected input source, the sound field program, the
surround decoder, the FM/AM tuner frequency, etc.)(☞p. 7).
g Sound selection keys
REC
k
l
r
DISPLAY
FM
AM
MEMORY
PRESET F / G
TUNING H / I
Switch between the sound field effect (sound field program) you are
using and the surround decoder (☞p. 29).
1
2
3
4
5
6
7
8
9
0
10
INPUT
TV VOL
l Numeric keys
Enter numbers.
m TV control keys
Operate a monitor such as a TV.
n CODE SET
Sets remote control codes for external component operations (☞p. 62,
p. 66).
o RECEIVER A (RECEIVER Power)
Switches this unit between on and standby mode.
Switch this unit to standby mode automatically after a specified period
of time has elapsed (sleep timer). Press this key repeatedly to set the
time for the sleep timer function.
Sleep 120min.
Sleep Off
Sleep 90min.
Sleep 30min.
Sleep 60min.
The SLEEP indicator (☞p. 7) lights up when the sleep timer is on.
q OPTION
Displays the Option menu for each input source (☞p. 44).
r VOLUME +/Adjusts the volume level (☞p. 28).
s MUTE
Turns the mute function of the sound output on and off (☞p. 28).
h SCENE
Switches the input source and the sound field program with a single
button (☞p. 29). When this unit is in standby mode, press this key to
switch on.
i SETUP
TV
m
ENT
Operate recording, playback, and menu displays etc. for external
components. J1
p SLEEP
Operates the FM/AM tuner. These keys are used when using the tuner
input.
STEREO
STRAIGHT
HDMI1-4 jacks
AV1-6 jacks
AUDIO1-2 jacks
Front panel VIDEO AUX jacks
Changes the external component to operate with
the kExternal component operation keys
without changing inputs. J1
A Yamaha iPod universal dock or Bluetooth
wireless audio receiver connected to the DOCK
jack.
FM/AM tuner
e Tuner keys
ENHANCER SUR. DECODE
MOVIE
Select an input source on this unit from which to playback.
DOCK
TUNER
Cursor B / C / D / E Select menu items and change settings when
setting menus, etc, are displayed.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen when setting
menus are displayed, or ends the menu display.
k External component operation keys
d Input selector
HDMI1-4
AV1-6
AUDIO1-2
V-AUX
[A]/[B]
AV
j Cursor B / C / D / E, ENTER, RETURN
TV CH
Displays a detailed Setup menu for this unit (☞p. 48).
MUTE
J 1 : You can use kExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for each input
in advance if you want to operate external components (☞p. 62).
En
8
CONNECTIONS
Connecting speakers
This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and
connections in your listening environment.
Speaker channels and functions
■ Surround left and right speakers
■ Front left and right speakers
The surround speakers are for effect and vocal sounds with the 5.1channel speakers providing rear-area sounds. When used with 6.1/
7.1-channel (including surround back channel), sound for right and
left rear-area is output.
The front speakers are used for the front channel sounds (stereo
sound) and effect sounds.
Surround back speaker setting:
When used with 7.1ch sound, arrange the left and right speakers
towards the listening position, to the rear of the listening position.
Arrange the left and right speakers at least 30 cm apart. The same
separation as with the front left and right speakers is optimum.
When used with 6.1ch sound, arrange these to the rear of the
listening position.
■ Subwoofer
Ex.
Ex.
Front speaker layout:
Place these speakers at an equal distance from the ideal listening
position in the front of the room. When using a projector screen,
the appropriate top positions of the speakers are about 1/4 of the
screen from the bottom.
■ Center speaker
The center speaker is for the center channel sounds (dialog, vocals,
etc.).
Ex.
Center speaker layout:
Place it halfway between the left and right front speakers. When
using a TV, place the speaker just above or just under the center of
the TV with the front surfaces of the TV and the speaker aligned.
When using a screen, place it just under the center of the screen.
Surround speaker layout:
Place the speakers at the rear of the room on the left and right sides
facing the listening position. They should be placed between 60
degrees and 80 degrees from the listening position and with the
speaker tops at a height of 1.5 – 1.8 m from the floor.
The subwoofer speaker is used for bass sounds and low-frequency
effect (LFE) sounds included in Dolby Digital and DTS. Use a
subwoofer that is equipped with built-in amplifier.
■ Surround back left and right speakers
Outputs the rear effect. When used with 6.1ch sound, sound from
the left and right sound surround back speakers is mixed and output
from a single speaker. When used with 5.1ch sound, sound from
surround back speakers is distributed between the left and right
surround speakers.
When using the surround back speakers, connect an external
amplifier to the SURROUND BACK jacks of the PRE OUT
terminals.
Ex.
Subwoofer speaker layout:
Place it exterior to the front left and right speakers facing slightly
inward to reduce echoes from the wall.
Ex.
En
9
CONNECTIONS
Connecting speakers
Speaker layout
■ 5.1-channel speaker layout
(5 speakers + subwoofer)
■ 6.1-channel speaker layout
(6 speakers + subwoofer) J1
Front speaker R
Front speaker L
■ 7.1-channel speaker layout
(7 speakers + subwoofer) J1
Front speaker R
Subwoofer
Front speaker L
Front speaker R
Subwoofer
Surround
speaker R
Center speaker
60q
60q
Subwoofer
Front speaker L
Surround
speaker R
80q
Center speaker
60q 80q
60q
80q
Surround
speaker R
60q
60q
Center speaker
Surround speaker L
Surround speaker L
Surround back
speaker
Surround speaker L
Surround back
speaker L
• Connect at least two speakers (front left and right).
• If you cannot connect all five speakers, give priority to the
surround speakers.
• The surround speakers should be placed between 60 degrees and
80 degrees from the listening position.
• When used with 7.1-channel speaker layout, arrange the left and
right surround back speakers at least 30 cm a part.
80q
80q
80q
30 cm (12 in)
or more
Surround back
speaker R
■ CRT monitors
We recommend that you use magnetically shielded speakers to
avoid video distortion, especially for the front and center
speakers near the screen.
If your screen still gets interference from magnetically shielded
speakers, move the speakers farther away from your TV.
J 1 : When used with 7.1/6.1-channel speaker layout, connect an external amplifier
to the SURROUND BACK L/R jacks of the PRE OUT terminals (☞p. 11).
En
10
CONNECTIONS
Connecting speakers
■ Connecting the surround back speakers
Connecting speakers and subwoofer
Connect your speakers to their respective terminals on the rear panel.
CAUTION
• Remove the AC power cable of this unit from the power outlet before connecting the speakers.
• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different
color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined)
cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-”
(negative, black) terminal.
• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal
areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit,
“CHECK SP WIRES!” will appear on the front panel display when this unit is switched on.
Connecting an external amplifier to the SURROUND BACK L/R jacks of the PRE OUT terminals
allows you to create the maximum of 7.1-channel surround system with a surround back channel.
For a 6.1-channel system, connect the external amplifier to the SURROUND BACK L jack of the PRE
OUT terminals.
For a 7.1-channel system connect it to the SURROUND BACK L/R jacks.
SINGLE
SURROUND BACK
SUBWOOFER
PRE OUT
Front speaker
R
Surround speaker
L
R
L
Surround back
speaker
R
L
You can adjust the surround back speaker volume with a volume control of the external amplifier. To
obtain the balanced sound during playback, set the speaker output characteristics in advance using the
YPAO (Yamaha Parametric Room Acoustic Optimizer) or “Speaker Setup” of the Setup menu
(☞p. 23).
SPEAKERS
HDMI 3
HDMI 4
FRONT
CENTER
SURROUND
SINGLE
AUDIO
OUT
Center speaker
SURROUND BACK
SUBWOOFER
PRE OUT
Subwoofer
En
11
CONNECTIONS
Connecting speakers
■ (U.S.A. and Canada models only)
Changing speaker impedance
This unit is configured for 8Ω speakers as the factory setting.
When connecting to 6Ω speakers, carry out the following
procedure to switch to 6Ω.
1
2
4
5
Switch this unit to the standby mode, and then
switch it on again.
Connecting the banana plug (Except U.K., Europe,
Asia and Korea models)
Tighten the knob, and then insert the banana plug into the end of
the terminal.
The power turns on, when the settings you made has been
configured.
Switch this unit to the standby mode.
Press A while pressing and holding STRAIGHT on
the front panel.
2
FR
ON
T
Banana plug
■ Connecting speakers
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu items are
displayed. J1
3
FR
ON
T
1
4
PROGRAM l / h
A
Press STRAIGHT repeatedly to select a “6ΩMIN.”
YPAO MIC
INFO
MEMORY
PRESET
FM
AM
SCENE
BD
DVD
PHONES
INPUT
TONE CONTROL
TV
CD
PROGRAM
RADIO
1
Remove approximately 10 mm of insulation from the
ends of the speaker cables, and twist the bare wires
of the cables together firmly so that they will not
cause short circuits.
2
3
4
Loosen the speaker terminals.
STRAIGHT
SILENT CINEMA
STRAIGHT
3
Check that “SP IMP.” is displayed on the front panel.
SPIMP.-8MIN
Insert the bare wire of the speaker cable into the gap
on the side of the terminal.
Tighten the terminal.
J 1 : Refer to the “Extended functionality that can be configured as needed
(Advanced Setup menu)” (☞p. 65) for details on the Advanced Setup menu.
En
12
CONNECTIONS
Connecting speakers
■ Connecting the subwoofer
1
Connect the subwoofer input jack to the
SUBWOOFER jack on this unit with an audio pin
cable.
2
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
VOLUME
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
MAX
Subwoofer examples
En
13
CONNECTIONS
Connecting external components
■ Audio jacks
Cable plugs and jacks
This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for
components that you are going to connect.
■ Audio/Video jacks
OPTICAL jacks
COAXIAL jacks
These jacks transmit optical digital audio signals.
Use fiber-optic cables for optical digital audio
signals.
These jacks transmit coaxial digital audio signals.
Use pin cables for digital audio signals.
HDMI jacks
Digital audio fiber-optic cable
Digital audio pin cable
Digital video and digital sound are transmitted through a single jack.
Only use an HDMI cable.
HDMI cable
• Use a 19-pin HDMI cable with the HDMI logo.
• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.
AUDIO jacks
PORTABLE jack
These jacks transmit conventional analog audio
signals.
Use stereo pin cables, connecting the red plug to
the red R jack, and the white plug to the white L
jack.
This jack transmits conventional analog audio
signals.
Use a stereo mini-plug cable when connecting.
Stereo pin cable
■ Analog video jacks
COMPONENT VIDEO jacks
VIDEO jack
The signal is separated into three components:
luminance (Y), chrominance blue (PB), and
chrominance red (PR).
Use component video pin cables with three plugs.
This jack transmits conventional analog video
signals.
Use video pin cables.
Stereo mini-plug cable
Component video pin cable
Video pin cable
En
14
CONNECTIONS
Connecting external components
■ Connecting an HDMI video monitor
Connecting a TV monitor
Connect the HDMI cable to the HDMI OUT jack.
This unit is equipped with the following three types of output jack for connection to a TV.
HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input
signal format supported by your TV.
HDMI
ARC
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
COMPONENT VIDEO jacks
HDMI OUT jack (MONITOR OUT)
FM
HDMI 2
HDMI input
COMPONENT
VIDEO
COMPONENT
VIDEO
GND AM
PR
PR
HDMI
75ǡ
PB
PB
HDMI
VIDEO
VIDEO
Y
Y
MONITOR OUT
ARC
HDMI 1
ANTENNA
FM
TV
(BD/DVD)
HDMI OUT
DOCK
HDMI 2
HDM
COMPONENT
VIDEO
COMPONENT
VIDEO
GND AM
PR
PR
75ǡ
PB
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV
OUT
AV 6
AUDIO 1
AUDIO 2
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
• Use a 19-pin HDMI cable with the HDMI logo.
• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.
VIDEO jack
(MONITOR OUT)
■ Connecting a component video monitor
This unit will receive HDMI, component, or video signals in the same format as transmitted by the
output devices.
For example, these three output devices must be connected to the TV by matching input/output jacks
and cables, and then you must change the TV’s input mode to the proper setting.
Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.
Component video input
COMPONENT
VIDEO
ARC
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
FM
GND AM
PR
Input
Output
HDMI
HDMI
COMPONENT
VIDEO
COMPONENT
VIDEO
VIDEO
VIDEO
TV
HDMI input
75ǡ
PB
PR
PR
PB
PR
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
Y
PB
PB
VIDEO
VIDEO
Y
Y
Y
R OUT
TV
Component
video input
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
Video input
En
15
CONNECTIONS
Connecting external components
■ Connecting a video monitor
When using other TVs
Connect the video pin cable to the VIDEO (MONITOR OUT) jack.
To transmit sound from the TV to this unit, connect its AV1-6 or AUDIO1-2 jacks to the TV’s audio
output jacks.
Depending on the connection on TV, connect the TV’s audio output to the AV1-6 or AUDIO1-2.
ARC
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
FM
HDMI 2
Video input
COMPONENT
VIDEO
COMPONENT
VIDEO
GND AM
PR
PR
TV audio output
Connection
Optical digital audio output
Connect to the OPTICAL jack of the AV1 or AV4 with a digital audio pin
cable.
Coaxial digital audio output
Connect to the COAXIAL jack of the AV2 or AV3 with a fiber-optic cable.
Analog stereo output
Connect to one of the AV5, AV6, AUDIO1, AUDIO2, or V-AUX with a
stereo pin cable.
VIDEO
75ǡ
PB
V
PB
VIDEO
VIDEO
Y
Y
MONITO
V
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
TV
AUDIO 2
■ Listening to TV audio
Select the input source connected via TV’s audio output jack to enjoy the TV sound.
If the TV supports optical digital audio output, we recommend that you connect the TV audio output
to the receiver’s AV4 jack.
Connecting to AV4 allows you to switch the input source to AV4 with just a single key operation
using the SCENE function (☞p. 29).
To transmit sound from the TV to this unit, connect as followings according to the TV:
When using a TV that supports the Audio Return Channel function and HDMI
Control function
When your TV supports both HDMI Control (Ex. Panasonic VIERA Link) and Audio Return
Channel functions, audio/video output from the unit to the TV and audio output from the TV to the
unit are possible using a single HDMI cable.
The input source is switched automatically to match operations carried out on the TV, and that
makes TV sound control easier to use.
For the connections and settings, refer to “Single HDMI cable input to TV audio with Audio Return
Channel function” (☞p. 69).
Available input jacks
Audio output
(Optical)
ARC
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
FM
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
GND AM
PR
PR
OPTICAL
O
75ǡ
PB
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
TV
O
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
When using a TV that supports the HDMI Control functions
When using a TV that supports HDMI Control functions (Ex. Panasonic VIERA Link), if HDMI
Control functions are enabled on the unit, then input source can be switched automatically to match
operations carried out on the TV.
For the connections and settings, refer to “Switching the input source on this unit automatically
when listening to TV audio” (☞p. 68).
You can control your TV using the receiver’s remote control by entering the TV’s remote control
code (☞p. 62).
En
16
CONNECTIONS
Connecting external components
CODE SET
TRANSMIT
SOURCE
Connecting BD/DVD players and other devices
RECEIVER
SLEEP
HDMI
1
2
1
2
3
4
3
4
d
This unit has the following input jacks. Connect them to the appropriate output jacks on
the playback devices such as BD/DVD players.
AV
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
Input jack
TUNER
FM
AM
INFO
MEMORY
PRESET
TUNING
Video input
Audio input
HDMI1
HDMI
HDMI
HDMI2
HDMI
HDMI
HDMI3
HDMI
HDMI
■ Receiving video signals from the HDMI jack and audio signals
from a jack other than HDMI
This unit can use the AV1-6 or AUDIO1-2 input jacks to receive audio signals from
other input jacks.
For example, if an playback device cannot produce audio signals from an HDMI
jack, use the following method to change the audio input.
ARC
HDMI/Audio (Optical)
output
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
HDMI4
HDMI
HDMI
AV1
Component video
Optical digital
RADIO
OPTION
RETURN
q
VOLUME
ENTER
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
PR
75ǡ
PB
HDMI
PB
VIDEO
VIDEO
Y
CD
SETUP
HDMI 2
COMPONENT
HDMI VIDEO
GND AM
PR
HDMI
TV
HDMI 1
ANTENNA
FM
DIRECT
SCENE
BD
DVD
(BD/DVD)
HDMI OUT
DOCK
COMPONENT
VIDEO
TV CH
MUTE
ENT
j
AV2
Component video
Coaxial digital
AV3
Video
Coaxial digital
AV4
Video
Optical digital
AV5
Video
Analog (Stereo)
AV6
Video
Analog (Stereo)
AUDIO1
—
Analog (Stereo)
AUDIO2
—
Analog (Stereo)
VIDEO AUX
Video
Analog (Stereo)
O
OPTICAL
1
2
3
4
Connect the device with an HDMI cable to one of the HDMI1-4 jacks.
Select the HDMI input (HDMI1-4) that the playback device is connected to for
playback.
(TV)
AV 4
AV 5
AV
OUT
AV 6
AUDIO 1
AUDIO 2
Press jCursor D / E to select the audio input source.
HDMI1
VOL.
Audio;;;;;;AV1
L
SL
SW
C
R
SR
HDMI VIDEO
FM
GND AM
PR
HDMI output
OPTICAL
Press jCursor C until “Audio In” is displayed, and then press
jENTER.
FRONT
COMPONENT
(CD)
AV 3
Press qOPTION to display the Option menu. J1
HDMI OUT
COMPONENT
VIDEO
COAXIAL
AV 2
Use the dInput selector to select the desired HDMI input source.
ARC
ANTENNA
COAXIAL
BD/DVD player
HDMI
DOCK
MONITOR OUT
O
■ Connecting BD/DVD players and other devices with
d Input selector
j Cursor C / D / E
j ENTER
q OPTION
Y
OPTICAL
If you have selected AV1 input audio (optical digital)
PR
75ǡ
PB
PB
VIDEO
VIDEO
Y
5
Y
MONITOR OUT
HDMI
HDMI
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
Once you have completed the setup, press qOPTION to close the
Option menu.
AUDIO
OUT
J 1 : Refer to the “Configuring the settings specific for each input source (Option menu)” (☞p. 44) for details
BD/DVD player
on the Option menu.
En
17
CONNECTIONS
Connecting external components
■ Connecting BD/DVD players and other devices with component
cables
Connect the device with a component video cable to one of the AV1-2 input jacks.
■ Component connections to analog audio output devices
Component video / Audio
output
Using optical digital audio output sources
Select the AV1 input that the playback device is connected to for playback.
COMPONENT
VIDEO
ARC
PR
PB
AUDIO
ARC
COMPONENT
HDMI 1
ANTENNA
PR
PR
PB
PB
Y
Y
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
FM
Y
(BD/DVD)
HDMI OUT
DOCK
Component video / Audio (Optical)
output
GND AM
PR
75ǡ
PB
VIDEO
VIDEO
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
COMPONENT
VIDEO
COMPONENT
VIDEO
FM
PR
L
Y
MONITOR OUT
ANTENNA
PR
HDMI 2
R
L
GND AM
PR
PR
R
PB
PB
75ǡ
PB
Y
PB
Y
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
VIDEO
VIDEO
Y
Y
MONITOR OUT
OPTICAL
Game console
O
O
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV
OUT
AV 6
AUDIO 1
BD/DVD player
Using coaxial digital audio output sources
Select the AV2 input that the playback device is connected to for playback.
Component video / Audio (Coaxial)
output
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
PR
FM
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
VOL.
Audio;;;AUDIO1
L
SL
SW
C
R
SR
GND AM
P
PR R
PR
If you have selected AUDIO1 input audio (Analog stereo)
PB
75ǡ
P
PB B
Y
You can use the video input from the AV1-2 jacks in combination with the audio input from other
AV inputs or AUDIO1-2.
When connecting these devices, select the AV input jacks or the AUDIO1-2 jacks as the audio input
for AV1 or AV2. Refer to “Receiving video signals from the HDMI jack and audio signals from a
jack other than HDMI” (☞p. 17) for detailed setup guidance.
Select the AV input source (AV1-2) that is connected by component video cable to the playback
device for playback.
AV1
ARC
COMPONENT
VIDEO
AUDIO 2
PB
VIDEO
VIDEO
Y
Y
Y
MONITOR OUT
COAXIAL
C
C
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
BD/DVD player
En
18
CONNECTIONS
Connecting external components
■ Connecting BD/DVD players and other devices with video cables
Connect the playback device with a video pin cable to one of the AV3-6 input jacks.
Using analog stereo audio output sources
Select the AV5 or AV6 input that the playback device is connected to for playback.
Using optical digital audio output sources
Select the AV4 input that the playback device is connected to for playback.
ARC
Video / Audio
output
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
FM
GND AM
PR
HDMI 1
PB
PB
HDMI 2
COMPONENT
VIDEO
AUDIO
GND AM
PR
VIDEO
V
Y
Y
PR
MONITOR OUT
L
75ǡ
PB
VIDEO
L
PB
VIDEO
VIDEO
V
75ǡ
VIDEO
ANTENNA
COMPONENT
VIDEO
FM
V
(BD/DVD)
HDMI OUT
DOCK
PR
VIDEO
ARC
Video / Audio (Optical)
output
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
V
Y
R
R
Y
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
MONITOR OUT
OPTICAL
OPTICAL
AV
OUT
AUDIO 1
AUDIO 2
O
O
OPTICAL
COAXIAL
COAXIAL
AV 1
AV 2
AV 3
OPTICAL
AV
OUT
(CD)
AV 5
AV 6
AUDIO 1
BD/DVD player
AUDIO 2
BD/DVD player
Using coaxial digital audio output sources
Select the AV3 input that the playback device is connected to for playback.
ARC
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
Video / Audio (Coaxial)
output
FM
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
GND AM
PR
PR
75ǡ
PB
VIDEO
PB
VIDEO
VIDEO
V
V
Y
Y
MONITOR OUT
COAXIAL
C
C
OPTICAL
COAXIAL
AV 1
AV 2
COAXIAL
(CD)
OPTICAL
(TV)
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
BD/DVD player
En
19
CONNECTIONS
Connecting external components
■ Connecting CD players and other audio devices
Using coaxial digital output sources
Select the AV input (AV2 or AV3) that the playback device is connected to for playback.
Using analog stereo output sources
Select the audio input (AUDIO1-2) that the playback device is connected to for playback.
ARC
(BD/DVD)
HDMI OUT
HDMI 1
ANTENNA
FM
FM
PR
COMPONENT
VIDEO
GND AM
PR
Audio (Coaxial) output
PR
75ǡ
PB
PB
VIDEO
VIDEO
Y
75ǡ
PB
GND AM
PR
HDMI 2
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
COMPONENT
VIDEO
Audio output
HDMI 1
ANTENNA
ARC
DOCK
(BD/DVD)
HDMI OUT
DOCK
Y
PB
MONITOR OUT
VIDEO
VIDEO
AUDIO
Y
C
COAXIAL
Y
L
C
MONITOR OUT
L
R
OPTICAL
COAXIAL
COAXIAL
(CD)
AV 1
OPTICAL
(TV)
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
R
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
(TV)
AV 3
AV 4
AV 5
AV
OUT
AV 6
CD player
CD player
Using optical digital output sources
Select the AV input (AV1 or AV4) that the playback device is connected to for playback.
We recommend connecting audio devices with an coaxial digital output to the AV3 coaxial digital
jack on this unit. This connection allows you to switch to the AV input 3 just by pressing the “CD”
SCENE key (☞p. 29).
ARC
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
FM
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
GND AM
PR
PR
75ǡ
PB
Audio (Optical) output
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
OPTICAL
O
O
OPTICAL
COAXIAL
COAXIAL
AV 2
AV 3
OPTICAL
(CD)
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
CD player
En
20
CONNECTIONS
Connecting external components
Connecting video cameras and portable audio players
Transmitting input A/V to external components
Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, video game units,
or portable audio devices to the receiver.
Select the V-AUX input to use these connected devices.
This receiver can transmit selected incoming analog audio/video signals to external components
through the AV OUT and AUDIO OUT jacks. You can record these input audio and video signals to
VCRs or similar devices, or send them to other TVs or external components.
Video / Audio
input
RADIO
VIDEO
VIDEO AUX
STRAIGHT
V
PORTABLE
VIDEO
V
L
L
AUDIO
R
AUDIO
R
L
AUDIO
AUDIO OUT
R
ARC
L
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
Audio output
Audio output
FM
R
HDMI 4
FRONT
PR
75ǡ
PB
V
Video output
HDMI 3
GND AM
PR
VIDEO
HDMI 2
COMPONENT
VIDEO
COMPONENT
VIDEO
PB
VIDEO
VIDEO
V
Y
VCR
Y
MONITOR OUT
L
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
R
OPTICAL
AV 5
Audio input
L
AV 6
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
AUDIO
L
R
Portable audio player
Video cameras
• Be sure to turn down the volume when connecting this unit and the other devices.
• When external components are connected to both the PORTABLE jack and the AUDIO jacks, the sound
output from the PORTABLE jack is transmitted.
Audio recorder
Using the AV OUT jacks
Connect this jacks to the external component’s video input jack and analog audio input jacks.
Using the AUDIO OUT jacks
Connect this jack to the external component’s analog audio input jacks.
HDMI audio/video signals, component video signals, and digital audio signals cannot be transmitted
from these jacks.
En
21
CONNECTIONS
Connecting the FM/AM antennas
An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas
properly to their respective jacks.
AM loop antenna
Position the AM antenna away from the receiver.
The wires of the AM antenna have no polarity.
You can connect either wire to the AM jack or the
GND jack.
Indoor FM antenna
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
NENT
O
FM
HDMI 2
HDMI 3
COMPONENT
VIDEO
GND AM
PR
75ǡ
PB
VIDEO
VIDEO
Y
MONITOR OUT
Connecting the AM loop antenna
Press and hold
Insert
Release
■ Improving FM reception
We recommend using an outdoor antenna. For more information, consult the nearest authorized
dealer.
■ Improving AM reception
Connect this unit to an outdoor antenna with a 5-10 m vinyl-coated wire. Make sure the AM loop
antenna is still connected.
Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper
plate with a vinyl-covered wire and bury this new attachment in moist ground.
The GND jack is not to be connected to the ground socket of an electrical outlet.
En
22
CONNECTIONS
Set up the speaker parameters automatically (YPAO)
This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using
YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room
in which this unit is placed). J1
When you use YPAO, a test tone will be output from the
speakers for approximately 3 minutes and acoustic measuring
will be performed. When using YPAO, be careful of the
following.
2
4
Connect the YPAO microphone to the YPAO MIC jack
on the front panel.
Face the head of the YPAO microphone upwards.
• The test tone is output at high volume. Please refrain from using
this function at night when it may be a nuisance to others nearby.
• Please take care that the test tone does not frighten any small
children.
1
Place the supplied YPAO microphone at ear height in
your listening position.
YPAO microphone
YPAO MIC
INFO
Check the following before using YPAO.
This unit
“MIC ON. YPAO START” appears on the front panel display, and
then changes to display the following. J2
• The headphones are removed.
Subwoofer
• The power is turned on.
• Volume is set to approximately half, and the cross-over frequency (if
present) is set to maximum.
VOLUME
When positioning the microphone, we recommend that you use
equipment that allows you to adjust the height (such as a tripod)
as a microphone stand. When using a tripod, use the tripod
screws to fix the microphone in place.
MAX
Press[SETUP]
VOL.
SW
C
R
L
SL
SR
SBL
SBR
CROSSOVER/
HIGH CUT
3
MIN
YPAO
MIN
Switch this unit on.
Continues to the
next page
MAX
Subwoofer examples
J 1 : When you have changed the number of speakers or the locations in which they
are installed, first use YPAO to adjust the speaker balance.
J 2 : To cancel measurement, disconnect the YPAO microphone.
En
23
CONNECTIONS
Set up the speaker parameters automatically (YPAO)
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
5
HDMI
1
2
1
2
3
4
3
4
AV
AUDIO
5
V-AUX
6
1
[ A ]
[ B ]
During YPAO, the results of measuring the acoustic
characteristics are used to set the equalizer (parametric
equalizer) to give a unified sound field. After setting,
you can select the characteristics of the sound field in
“EQ Type,” as necessary.
2
DOCK
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
If necessary, press qOPTION repeatedly
and select the measuring acoustic
characteristics in the “EQ Type” setting. J1
TUNING
6
Press iSETUP to start measurement.
7
Display during measurement
YPAO
YPAO
VOL.
Progress02%
The following display appears when measurement
finishes without any problems.
STEREO
DIRECT
Natural
(Default)
Adjusts all speaker sound to give natural
acoustics.
Flat
Sets uniform characteristics for each
speaker. Choose this when all of the
speakers used are of the same quality. If
the treble range sounds harsh after
adjustment, select “Natural” and measure
again.
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
RETURN
q
VOLUME
ENTER
i
j
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
Front
Sets the characteristics of each speaker to
match the front speakers. Choose this
when the front speakers are of
significantly higher quality than the other
speakers.
YPAO
VOL.
YPAOComplete
L
SL
SW
C
R
SR
VOL.
Disconnect MIC
SW
C
R
L
SL
SR
SBL
SBR
ENHANCER SUR. DECODE
STRAIGHT
Press jENTER to apply the results of
measurement.
L
SL
SW
C
R
SR
You can use the following method to cancel
measurement results if you want to redo the
measuring. Press jCursor C to switch to the
following display, the use jCursor D / E to select
“Cancel” and press jENTER. After this operation,
use the same procedure to carry out YPAO again.
YPAO
NOTE
VOL.
Set>Cancel
When a problem occurs, an error message or report
appears either during or after measurement. Use the
following page as a reference to solve the problem,
and carry out YPAO again.
8
L
SL
SW
C
R
SR
Remove the YPAO microphone.
YPAO finishes automatically when the YPAO
microphone is removed.
ENT
TV
INPUT
TV VOL
TV CH
MUTE
i SETUP
j Cursor B / C / D / E
j ENTER
q OPTION
This completes preparations. To achieve more
accurate results, be careful of the following when
measuring.
• Measuring will take approximately 3 minutes. Keep
the room as quiet as possible during measurement.
• Wait in the corner of the listening room during
measurement or leave it entirely, to avoid becoming an
obstruction between the speakers and the YPAO
microphone.
The YPAO microphone is sensitive to heat. When you
have finished measuring, store the microphone out of
direct sunlight, and away from locations that may
experience high temperatures, such as on top of AV
equipment.
J 1 : You can also select “EQ Type” using the cursor keys. Press
jCursor B to select “EQ Type,” and you can change the setting
using jCursor D / E.
En
24
CONNECTIONS
Set up the speaker parameters automatically (YPAO)
CODE SET
TRANSMIT
SOURCE
■ When an error message appears
RECEIVER
SLEEP
during measurement
HDMI
1
2
3
4
3
4
Check the content of the message from the “Error
message” (☞p. 26) to resolve the problem, and carry out
the measurement process again.
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
YPAO
TUNER
FM
INFO
E-9:CANCEL
AM
PRESET
TUNING
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
Error message (example)
STEREO
STRAIGHT
DIRECT
Check the error code that appears in the display, and
carry out YPAO again by performing the following steps.
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
When “E-1,” “E-2,” “E-4” or “E-6” is
displayed:
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
VOL.
0
10
TV
INPUT
TV VOL
TV CH
MUTE
j Cursor C / D / E
j ENTER
ENT
j
1
2
3
4
Press jCursor C once, and then press
jCursor E to select “Exit.”
Press jENTER to finish YPAO, and switch
the unit to standby mode.
Check that the speakers are properly
connected.
Turn on the unit, and then carry out YPAO
again.
When “E-5,” “E-7,” “E-8” or “E-9” is
displayed:
1
2
3
Check that the environment is suitable for
accurate measurement.
Press jCursor C once to select “Retry.”
after measurement
Check the content of the message from the “Warning
message” (☞p. 27) to resolve the problem. You can
confirm the speaker that has the problem on the TV
screen.
YPAO
Press jENTER to carry out YPAO again.
VOL.
WARNING(1)
SW
C
L
SL
R
SR
Number of messages
When “E-10” is displayed:
1
2
3
4
■ When a warning message appears
Press jCursor C once to select “Exit.”
NOTE
Although you can apply the results of measurement
when a warning message appears, doing so will not
provide optimal sound. We recommend you resolve
the problem and then carry out YPAO again.
Press jENTER to finish YPAO.
Confirm the warning message:
Press jENTER once.
Switch the unit to standby mode.
YPAO
Turn on the unit again, and then carry out
YPAO.
VOL.
W-3:LEVEL
Warning message (example)
SL
SR
Speaker that has a
problem
When multiple warning messages exist:
Press jENTER to confirm the warning message and
use jCursor D / E to display other warning messages.
When applying the results of measurement:
If an warning message is displayed, press jENTER to
switch display, use jCursor D / E to select “Set,” and
press jENTER.
When cancelling YPAO:
If an warning message is displayed, press jENTER to
switch display, use jCursor D / E to select “Cancel,”
and press jENTER.
En
25
CONNECTIONS
Set up the speaker parameters automatically (YPAO)
■ Message list
■ Error message
E-1:FRONT SP
NOTE
If the following messages appear, resolve the problems that have
occurred and carry out the measurement process again.
E-2:SUR. SP
■ When a warning message appears before
measurement
E-4:SBR->SBL
Connect MIC!
The YPAO microphone is
not connected.
Connect the YPAO
microphone to the YPAO
MIC jack on the front
panel.
Unplug HP!
The headphones are
connected.
Remove the headphones.
Memory Guard!
The settings of this unit
are protected.
Set “Memory Guard” in
the Setup menu to “Off”
(☞p. 58).
E-5:NOISY
E-6:CHECK SUR.
The unit was not able to
find the front channel.
Check that the left and
right front speakers are
connected correctly.
The unit was only able to
find one of side of the
surround channels.
Check that the left and
right surround speakers
are connected correctly.
Only one surround back
speaker is connected and
only the right side
surround back channel
sound is detected.
When only one surround
back speaker is
connected, connect to the
left side terminal on the
external amplifier.
The noise is too loud,
preventing accurate
measurements from
being taken.
Measure again in quiet
surroundings. Turn off any
devices in the room that
may be emitting noise, or
place them further away
from the YPAO
microphone.
When this message is
displayed, selecting
“Proceed” will allow you
to continue measuring.
However, we recommend
resolving the problem and
measuring again, as
continuing measurement
without doing so will not
give accurate results.
Even though surround
left and right speakers are
not connected, only the
surround back speakers
are connected.
E-7:NO MIC
The YPAO microphone
has been removed.
While measuring, take
care not to touch the
YPAO microphone.
E-8:NO SIGNAL
The YPAO microphone
could not distinguish a
test tone.
Check that the YPAO
microphone has been
installed correctly.
Check that each speaker
has been connected and
installed correctly.
The YPAO microphone
or the YPAO MIC jack
may be broken. Inquire at
the retailer where you
purchased this unit, or the
nearest Yamaha service
center.
E-9:CANCEL
You have carried out an
operation that has
cancelled the measuring
process.
Carry out the measuring
process again. Do not
operate this unit by, for
example, adjusting the
volume.
E-10:INTERNAL
An internal error has
occurred.
Carry out the measuring
process again. Contact a
Yamaha service center if
“E-10” appears again.
When using surround back
speakers, connection of the
surround left/right
speakers is necessary.
En
26
CONNECTIONS
Set up the speaker parameters automatically (YPAO)
■ Warning message
W-1:PHASE
The speakers displayed
are connected with the
opposite polarity.
Depending on the type of
speakers you are using
and the environment in
which you have them
installed, this message
may occur even if the
speakers are connected
correctly.
Depending on the type of
speakers, “W-1” may
display even if the
speakers are connected
correctly.
W-2:DISTANCE
The speakers displayed
are separated from the
listening position by
more than 24 m, and
cannot be adjusted
correctly.
Install the speakers with
24 m of the listening
point.
W-3:LEVEL
The difference each
channel is too loud or too
low, and cannot be
adjusted correctly.
Check that all speakers
are installed in the same
surroundings.
Check that the speaker
polarity + (positive), and
- (negative) are correct. If
these are connected
correctly, you can use the
speakers normally even
this message appears.
Check that the speaker
polarity + (positive), and
- (negative) are correct.
We recommend the same
speakers or speakers with
as similar specifications
as possible.
Adjust the volume of the
subwoofer.
If “W-2” or “W-3” appears, you can apply measurement results,
but they will not give optimal results. We recommend that you
resolve the problem and carry out the measurement process
again.
En
27
PLAYBACK
CODE SET
TRANSMIT
SOURCE
Basic playback procedure
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
d
TUNER
FM
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
1
2
Turn on external components (TV, DVD
player, etc.) connected to this unit.
Turn on this unit and select the input source
using dInput selector.
The name of the selected input source is displayed for
a few seconds. J1
TUNING
Adjusting high/low-frequency sound
(Tone control)
You can adjust the balance of the high-frequency range
(Treble) and low-frequency range (Bass) of sounds
output from the front left and right speakers to obtain
desired tone.
2
Press PROGRAM l / h to adjust the output
level in those frequency ranges.
Adjustable range
-10.0 dB to +10.0 dB
Adjustment
increments
2.0 dB
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
3
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
ENTER
RETURN
Play the external component that you have
selected as the source input, or select a
radio station on the tuner.
VOLUME
r
Refer to the instruction manuals provided with the
external component for details on playback.
MUTE
s
For details on the following operations, refer to the
corresponding pages:
DISPLAY
POP-UP
MENU
TOP
MENU
The tone control of the speakers or headphones can be
set separately. Set the headphone tone control with the
headphones connected.
1
The display returns to the previous display soon after
you release the key.
If you set the balance extremely off, sounds may not
match those from other channels well.
Press TONE CONTROL on the front panel
repeatedly to select “Treble” or “Bass.”
TONE CONTROL
REC
1
2
3
4
5
6
7
8
9
0
10
• “FM/AM tuning” (☞p. 34)
• “Playing back tunes from your iPod™/iPhone™”
(☞p. 39)
• “Playing back tunes from Bluetooth™ components”
(☞p. 42)
ENT
YPAO MIC
INFO
MEMORY
PRESET
FM
AM
SCENE
BD
DVD
TV
CD
RADIO
TV
INPUT
TV VOL
TV CH
MUTE
4
Press rVOLUME +/- to adjust the volume.
PHONES
TONE CONTROL
STRAIGHT
PROGRAM
SILENT CINEMA
PROGRAM l / h
To mute the output.
d Input selector
r VOLUME +/s MUTE
INPUT
Press sMUTE to mute the audio output.
Press sMUTE again to unmute.
The current setting is displayed on the front panel
display.
TONE
Treble
VOL.
0.0dB
L
SL
SW
C
R
SR
J 1 : You can change the input source name displayed on the front
panel display as necessary (☞p. 57).
En
28
PLAYBACK
Changing input settings with a single key (SCENE function)
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
This unit has a SCENE function that allows you switch this unit on and change input sources and sound field programs with one key.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
TUNER
FM
AM
INFO
MEMORY
Four scenes are available for different uses, such as
d playing movies or music. The following input sources
and sound field programs are provided as the initial
factory settings.
SCENE
Input
Sound field program
BD/DVD
HDMI1
Straight
TV
AV4
Straight
CD
AV3
Straight
RADIO
TUNER
7ch Enhancer
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
DIRECT
g
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
1
2
Use dInput selector to select the input
source you want to register.
Use the gSound selection keys to select
the sound field program you want to
register.
3
Press the hSCENE key until “SET
Complete” appears on the front panel
display.
SCENE1
VOL.
SET Complete
L
SL
SW
C
R
SR
Release the key when “SET Complete” is displayed
When changing “SCENE,” also change the external
component that the remote control operates (☞p. 62).
VOLUME
ENTER
RETURN
h
Registering input sources/sound
field program
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
TV
INPUT
TV VOL
TV CH
MUTE
d Input selector
g Sound selection keys
h SCENE
Enjoying sound field programs
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel playback for almost any sound source using various
sound field programs stored on the chip, and a range of sound decoders.
Selecting sound field programs and
sound decoders
This unit offers sound field settings (sound field
programs) in many different categories suitable for
movies, music and other uses. Choose a sound field
program that sounds best with the source you are playing
back, rather than relying on the name or explanation of
the program.
• Sound field programs are stored for each input source.
When you change the input source, the sound field
program previously selected for that input source is
applied again.
• When you playback DTS Express sources or audio
signals with sampling frequency of higher than
96 kHz, the straight decoding mode (☞p. 30) is
automatically selected.
• When you playback DTS-HD sources with CINEMA
DSP, the DTS decoder is automatically selected.
Continues to the
next page
En
29
PLAYBACK
Enjoying sound field programs
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
HDMI
1
2
3
4
AV
1
2
3
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
TUNER
INFO
MEMORY
MOVIE
MUSIC
TUNING
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
SCENE
TV
CD
SETUP
Press gSTEREO repeatedly
Use straight decoding mode when you want to playback
sound without sound field processing. You can playback
as follows in straight decoding mode.
Selects compressed music enhancer:
2-channel sources such as CD
Press gSTEREO repeatedly
Stereo sound plays through the front left and right
speakers.
Selects stereo reproduction:
Selects surround decoder:
Press gSUR. DECODE repeatedly
g Switches Straight decoding mode:
Press gSTRAIGHT
Switches Direct mode (☞p. 31):
Select “2ch Stereo” from the surround field programs
when you want to playback 2-channel stereo sound
(from the front speakers only), regardless of the
playback source.
Selecting “2ch Stereo” will playback as follows for the
playback of CD and BD/DVD sources.
2-channel sources such as CD
Multi-channel playback sources such as BD/
DVD
RADIO
OPTION
■ Enjoying stereo playback
(Straight decoding mode)
AM
PRESET
BD
DVD
MOVIE category: Press gMOVIE repeatedly
MUSIC category: Press gMUSIC repeatedly
4
AUDIO
FM
■ Enjoying unprocessed playback
Selects sound field program:
Stereo sound plays back through the front speakers.
Multi-channel sources such as BD/DVD
Plays back audio from a playback source without
applying sound field effects, using an appropriate
decoder to split the signal into multiple channels.
Playback channels other than the front channels in the
playback source are mixed with the front channels and
played back through the front speakers.
Press gSTRAIGHT to enable the straight
decoding mode.
Press gSTEREO repeatedly to select “2ch
Stereo.”
Press gDIRECT
VOLUME
ENTER
Sound field program categories
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
MOVIE
VOL.
Sci-Fi
REC
1
2
3
4
5
6
7
8
9
0
L
SL
R
SR
Program
10
ENT
TV
INPUT
TV VOL
TV CH
MUTE
STEREO
VOL.
SW
C
• You can use the speaker indicators on the front panel
display to check what speakers are currently
outputting sound (☞p. 7).
• You can adjust sound field elements (sound field
parameters) for each of the programs.
Straight
L
SL
SW
C
R
SR
Sci-Fi
SW
2ch Stereo
R
L
To disable stereo playback, press any of the gSound
selection keys to select a sound field program other
than “2ch Stereo.”
To disable straight decoding mode, press
gSTRAIGHT again.
MOVIE
VOL.
VOL.
L
SL
SW
C
R
SR
MUSIC
VOL.
Hall in Vienna
L
SL
SW
C
R
SR
Previously selected program
g Sound selection keys
g MOVIE
g MUSIC
g STEREO
g SUR. DECODE
g STRAIGHT
g DIRECT
En
30
PLAYBACK
Enjoying sound field programs
CODE SET
TRANSMIT
SOURCE
■ Enjoying sound field programs
RECEIVER
SLEEP
without surround sound speakers
HDMI
1
2
3
4
3
4
This unit allows you to use virtual surround speakers to
enjoy sound field surround effects, even without any
surround speakers (Virtual CINEMA DSP mode). You
can even enjoy surround sound presence with just a
minimal configuration of the front speakers only.
This unit will switch to Virtual CINEMA DSP mode
automatically when surround speakers are
unavailable. J1
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
■ Enjoying sound field programs
with headphones
Even when headphones are connected, you can enjoy the
reproduction sound field presence with ease (SILENT
CINEMA mode). J2
■ Enjoying Hi-Fi Sound Quality
(Direct mode)
Use Direct mode to enjoy the pure high fidelity sound of
the selected source. When direct mode is enabled, this
unit plays back the selected source with the least
circuitry. J3
ENT
Press gDIRECT to turn direct mode on. J4
TV
INPUT
TV VOL
g
TV CH
MUTE
VOL.
Direct
g DIRECT
L
R
To disable direct mode, press gDIRECT again.
J 1 : However, Virtual CINEMA DSP mode is not available in the
following conditions:
• When headphones are connected to this unit.
• When a “7ch Stereo” sound field program is selected.
• When direct mode or straight decoding mode is selected.
J 2 : However, SILENT CINEMA mode is not available in the
following conditions:
• When a “7ch Stereo” sound field program is selected.
• When direct mode or straight decoding mode is selected.
J 3 : The following features are disabled in direct mode.
• sound field program, tone control
• display and operation of the Option menu and Setup menu
J 4 : While direct mode is on, the front panel display screen becomes
dim in order to reduce noise. When turning Direct mode off, the
brightness of the screen returns to the previous setting.
En
31
PLAYBACK
Enjoying sound field programs
Sound field programs
Action Game
This sound field is suitable for action games such as car racing and FPS games. It uses
reflection data that limits the effects range per channel in order to offer a powerful playing
environment that makes the listener feel as if they are right there by enhancing various
effects tones while maintaining a clear sense of directions.
Roleplaying Game
This sound field is suitable for role-playing and adventure games. It combines the sound
field effects for movies and the sound field designs for “Action Game” to represent the depth
and 3D feeling of the field during play, while offering movie-like surround effects in the
movie scenes in the game.
in the table indicates the sound field program for CINEMA DSP.
■ Category: MOVIE
Sound field programs optimized for viewing video sources such as movies, TV programs, and games.
Standard
This program creates a sound field emphasizing the surround feeling without disturbing the
original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has
been designed with the concept of an ideal movie theater, in which the audience is
surrounded by beautiful reverberations from the left, right and rear.
Spectacle
This program represents the spectacular feeling of large-scale movie productions. It
reproduces a broad theater sound field that matches cinemascope and wider-screen movies
with an excellent dynamic range providing everything from very small sound effects to
large, impressive sounds.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the latest science
fiction and special effects-featuring movies. You can enjoy a variety of cinematographically
created virtual spaces reproduced with clear separation between dialog, sound effects and
background music.
Adventure
This program is ideal for precisely reproducing the sound design of action and adventure
movies. The sound field restrains reverberations but puts emphasis on reproducing a
powerful space expanded widely to the left and right. The reproduced depth is also
restrained relatively to ensure the separation between audio channels and the clarity of the
sound.
Drama
This sound field features stable reverberations that match a wide range of movie genres from
serious dramas to musicals and comedies. The reverberations are modest but offer an
optimum 3D feeling, reproducing effects tones and background music softly but cubically
around clear words and center positioning in a way that does not fatigue the listener even
after long hours of viewing.
Mono Movie
This program is provided for reproducing monaural video sources such as a classic movie in
an atmosphere of a good old movie theater. The program produces the optimum expansion
and reverberation to the original audio to create a comfortable space with a certain sound
depth.
Sports
This program allows the listeners to enjoy stereo sport broadcasts and studio variety
programs with enriched live feeling. In sports broadcasts, the voices of the commentator and
sportscaster are positioned clearly at the center while the atmosphere of the stadium expands
in an optimal space to offer the listeners a feeling of presence in the stadium.
■ Category: MUSIC
This sound field is suitable when listening to music sources such as CDs.
Hall in Munich
This sound field simulates a concert hall with approximately 2500 seats in Munich, using
stylish wood for the interior finishing as normal standards for European concert halls. Fine,
beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual
seat is at the center left of the arena.
Hall in Vienna
This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is
traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from
all around the audience, producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling like an audience hall in a
palace. It offers pleasant reverberations that are suitable for courtly music and chamber
music.
Cellar Club
This program simulates a live house with a low ceiling and homey atmosphere. A realistic,
live sound field features powerful sound as if the listener is in a row in front of a small stage.
The Roxy Theatre
This is the sound field of a rock music live house in Los Angeles, with approximately 460
seats. The listener’s virtual seat is at the center left of the hall.
The Bottom Line
This is the sound field at stage front in The Bottom Line, a famous New York jazz club once.
The floor can seat 300 people to the left and right in a sound field offering real and vibrant
sound.
Music Video
This sound field offers an image of a concert hall for live performance of pop, rock and jazz
music. The listener can indulge oneself in a hot live space thanks to the presence sound field
that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments,
and to the surround sound field that reproduces the space of a big live hall.
En
32
PLAYBACK
Enjoying sound field programs
■ Category: STEREO
Suitable for listening to stereo sources.
2ch Stereo
Use this program to mix down multi-channel sources to 2-channels. When multi-channel
signals are input, they are down mixed to 2-channels and output from the front left and right
speakers.
7ch Stereo
Use this program to output sound from all speakers. When you playback multi-channel
sources, this unit down-mixes the source to 2-channels, and then outputs the sound from all
speakers. This program creates a larger sound field and is ideal for background music at
parties, etc.
■ Category: ENHNCR (Compressed music enhancer)
Suitable for listening to compressed audio, such as MP3.
Straight Enhancer
Use this program to restore the original depth and dynamics of 2-channel or multi-channel
to compression audio.
7ch Enhancer
Use this program to playback compression artifacts in 7-channel stereo.
■ Category: SUR.DEC (Surround decode mode)
Select this program to playback sources with selected decoders. You can playback 2-channel sound
sources in up to 7-channels using a surround decoder.
q Pro Logic
Reproduces sound using the Dolby Pro Logic decoder. This is suitable for all kinds of sound
sources.
q PLIIx Movie /
q PLII Movie
Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is
suitable for movies. J1
q PLIIx Music /
q PLII Music
Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is
suitable for music. J1
q PLIIx Game /
q PLII Game
Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is
suitable for games. J1
Neo:6 Cinema
Reproduces sound using the DTS Neo:6 decoder. This is suitable for movies.
Neo:6 Music
Reproduces sound using the DTS Neo:6 decoder. This is suitable for music.
J 1 : You cannot select the Dolby Pro Logic IIx decoder in the following conditions:
• When the “Sur. B” setting in “Speaker Setup” of the Setup menu is set to “None.”
• When headphones are connected.
En
33
PLAYBACK
FM/AM tuning
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
When using the FM/AM tuner, adjust the direction of
the FM/AM antenna connected to this unit to get the
best reception.
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
d
TUNER
e
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
(Asia and General models only)
The factory pre-set FM/AM tuner frequency steps are
9 kHz for AM and 50 kHz for FM.
Carry out the following settings and select the
frequency steps suitable for your listening
environment.
RADIO
OPTION
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
1
2
REC
1
2
3
4
5
6
7
8
9
0
10
Switch this unit to the standby mode.
Press A while pressing and holding
STRAIGHT on the front panel.
Release the keys when “ADVANCED SETUP” is
displayed on the front panel display.
After approximately a few seconds, the top menu
items are displayed. J1
ENT
STRAIGHT
INPUT
TV VOL
Press PROGRAM h repeatedly to display
“TU.”
TU-AM9/FM50
4
5
Press STRAIGHT repeatedly to select a
frequency steps.
TV CH
MUTE
YPAO MIC
INFO
MEMORY
PRESET
FM
AM
1
2
Press dTUNER to switch to the tuner input.
Press eFM or eAM to select a band to
receive.
VOL.
Switch this unit to the standby mode, and
then switch it on again.
The power turns on, with the settings you made
configured.
A
TV
3
Selecting a frequency for reception
(Normal tuning)
FM87.50MHz
L
SL
SW
C
R
SR
Continues to the
next page
The FM/AM tuner of this unit provides the following
two modes for tuning.
Normal tuning
You can tune in to a desired FM/AM station by searching
or specifying its frequency.
Preset tuning (☞p. 35)
You can preset the frequencies of FM/AM stations by
registering them to specific numbers, and later just select
those numbers to tune in.
SCENE
BD
DVD
d TUNER
e FM
e AM
PHONES
INPUT
TONE CONTROL
TV
CD
PROGRAM
RADIO
STRAIGHT
SILENT CINEMA
FM/AM tuner frequencies will differ depending on
the country or region where the unit is being used.
This explanation uses a display with frequencies used
in U.K. and Europe models.
PROGRAM l / h
J 1 : Refer to the “Extended functionality that can be configured as
needed (Advanced Setup menu)” (☞p. 65) for details on the
Advanced Setup menu.
En
34
PLAYBACK
FM/AM tuning
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
3
HDMI
1
2
3
4
1
2
3
4
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
AV
AUDIO
TUNER
FM
AM
INFO
MEMORY
PRESET
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
DIRECT
Use eTUNING H / I to set a frequency to
receive.
eTUNING H
Increases the frequency. Press and hold this key for
longer than a second to search automatically for a station
d on a higher frequency than the current one. J1
e eTUNING I
Decreases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a lower frequency than the current one. J1
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
q
Lights up when receiving
a broadcast from a station
Lights up when receiving
a stereo broadcast
POP-UP
MENU
FM98.50MHz
MUTE
1
2
3
4
5
6
7
8
9
0
ENT
TV
INPUT
TV CH
l
Press dTUNER to switch to the tuner
input.
Press qOPTION to display the Option
menu. J3
Use jCursor B / C to select “FM Mode.”
OPTION
VOL.
L
SL
SW
C
In normal tuning mode, use the lNumeric keys on
the remote control to enter a frequency. Leave the
decimal point out when entering a number. J2
For example, enter as follows to select a station on
98.50MHz.
VOL.
Registering and recalling a
frequency (Preset tuning)
You can register up to 40 FM/AM stations as preset
stations. There are two methods of presetting stations,
“Auto Preset” and “Manual Preset.” Use one of these
methods to register stations.
■ Presetting FM stations
automatically (Auto Preset)
The tuner detects FM stations with strong signals and
registers up to 40 automatically.
AM stations cannot be automatically registered. Use
manual station preset (☞p. 36).
FMMode
R
SR
■ Entering a frequency number
TV VOL
1
2
3
STEREO
TUNED
REC
10
When you are receiving an FM broadcast and cannot
obtain a stable stereo broadcast, you can force this
unit to receive in a monaural mode.
STEREO
TUNED
j
DISPLAY
TOP
MENU
■ When signal reception is poor
4
Press jENTER and use jCursor D / E to
select “Mono.”
9850
VOL.
FMMode:Mono
1
2
3
Press dTUNER to switch to the tuner input.
Press qOPTION to display the Option
menu. J3
Use jCursor B / C to select “Auto Preset.”
MUTE
9
8
5
5
When setting is completed, press
qOPTION to close the Option menu.
To return this unit to its original settings, use the
same procedure and select “Stereo” in step 4.
d TUNER
e TUNING H / I
j Cursor B / C / D / E
j ENTER
l Numeric keys
q OPTION
OPTION
VOL.
Auto Preset
L
SL
SW
C
R
SR
Continues to the
next page
J 1 : When searching for a station, release the key once the search has
started.
J 2 : “Wrong Station!” appears on the front panel display when you
enter a frequency that is out of receivable range. Make sure that
the frequency entered is correct.
J 3 : Refer to the “Configuring the settings specific for each input
source (Option menu)” (☞p. 44) for details on the Option menu.
En
35
PLAYBACK
FM/AM tuning
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
4
HDMI
1
2
3
4
4
AV
1
2
3
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
AUDIO
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
e
Press jENTER, then press ePRESET F /
G or jCursor B / C to choose the present
number from which to start the Auto Preset
function.
Auto Preset will begin approximately 5 seconds after
you select a preset number.
If you do not select a preset number, Auto Preset will
begin approximately 5 seconds after “READY” is
displayed.
ENHANCER SUR. DECODE
STEREO
STRAIGHT
Selecting a preset number
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
Status
RADIO
OPTION
RETURN
READY
VOLUME
ENTER
Frequency
j
L
SL
SW
C
R
SR
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
■ Designating a preset number for
registration
(Manual Preset)
Select stations manually and register them as presets
individually.
1
2
Tune in to the station you want to register,
referring to “Selecting a frequency for
reception (Normal tuning)” (☞p. 34).
Preset number
Press eMEMORY for 3 seconds or longer.
The station will be registered automatically to the lowest
open preset number (or the next number after the one
registered most recently).
MEMORY
To cancel registration, press jRETURN.
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
Preset number
The newly registered frequency
VOL.
STEREO
TUNED
01:Empty
REC
1
Press eMEMORY once, to display “Manual Preset” on
the front panel display. After a small wait, the preset
number that the station has been registered to will
appear.
9850
Use one of the following methods to
register the station you are currently
receiving.
■ Registering to a preset number to which no
station is registered
VOL.
01:FM87.50MHz
■ Registering stations manually
Blinks
L
SL
SW
C
R
SR
Empty, or the frequency registered
most previously
Press ePRESET F / G to select the preset to register
the station to, and then press eMEMORY to register.
To cancel registration, press jRETURN or do not
operate the remote control for about 30 seconds.
VOL.
STEREO
TUNED
01:FM98.50MHz
L
SL
SW
C
R
SR
During Auto Preset
ENT
Search
Preset for stations
SEARCH
MEMORY
Registered frequencies
TV CH
MUTE
e MEMORY
e PRESET F / G
j Cursor B / C
j ENTER
j RETURN
When Auto Preset is complete
FINISH
Auto Preset
VOL.
L
SL
SW
C
R
SR
The Option menu closes automatically when presetting
is complete. J1
J 1 : The preset with the lowest preset number will be selected
automatically immediately after presetting.
En
36
PLAYBACK
FM/AM tuning
CODE SET
TRANSMIT
SOURCE
Recalling a preset station
RECEIVER
SLEEP
Clearing preset stations
Radio Data System tuning
(U.K. and Europe models only)
HDMI
1
2
1
2
3
4
3
4
You can call preset stations registered by automatic
station preset or manual station preset. J1
AV
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
To select a registered station, press ePRESET
d F / G to select the preset number of the
station. J2
e
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RETURN
POP-UP
MENU
Use jCursor B / C to display “Clear
Preset” and press jENTER.
CLEAR
j
■ Displaying the Radio Data System
You can display the 4 types of the Radio Data System
information: “Program Service,” “Program Type,”
“Radio Text,” “Clock Time.”
VOL.
L
SL
SW
C
R
SR
MUTE
Blinks
REC
Registered frequencies
Press jRETURN to cancel the operation.
1
2
3
4
5
6
7
8
9
0
10
l
ENT
4
TV
INPUT
TV VOL
TV CH
MUTE
Radio Data System is a data transmission system used by
FM stations in many countries. This unit can receive
various Radio Data System data such as “Program
Service,” “Program Type,” “Radio Text,” “Clock Time”
when receiving Radio Data System broadcasting
stations.
information
01:FM98.50MHz
DISPLAY
TOP
MENU
Press qOPTION to display the Option
menu. J3
q
VOLUME
ENTER
Press dTUNER to switch to the tuner input.
The number of the preset to be cleared
RADIO
OPTION
1
2
3
Use jCursor B / C to select the preset
number you want to clear, and press
jENTER to clear it.
1
Tune into the desired Radio Data System
broadcasting station.
We recommend that you use the automatic preset
tuning to tune into the Radio Data System
broadcasting stations (☞p. 35).
Continues to the
next page
Repeat this operation to clear the registration of
multiple numbers.
d TUNER
e PRESET F / G
j Cursor B / C
j ENTER
j RETURN
l Numeric keys
q OPTION
5
J 1 : Preset numbers to which no stations are registered will be
skipped. “No Presets” is displayed when there are no stations are
registered.
Press qOPTION to finish this operation.
J 2 : To select a station by selecting a preset number, use the
lNumeric keys to enter the preset number of the station you
J 3 : Refer to the “Configuring the settings specific for each input
source (Option menu)” (☞p. 44) for details on the Option menu.
want to listen. When an invalid number is entered, “Wrong Num.”
appears on the front panel display. Check that you have entered
the correct number.
En
37
PLAYBACK
FM/AM tuning
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
2
HDMI
1
2
3
4
1
2
3
4
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
AV
Press fINFO repeatedly until the desired
information is displayed.
ProgramService
FM
AM
INFO
MEMORY
PRESET
ProgramType
VOL.
STEREO
TUNED
CLASSICS
L
SL
SW
C
R
SR
READY
VOL.
TrafficProgram
RadioText
L
SL
SW
C
R
SR
TUNING
f
MUSIC
(Frequency display)
ClockTime
STEREO
STRAIGHT
DIRECT
AudioDecoder
DSPProgram
SCENE
TV
CD
SETUP
RADIO
OPTION
POP-UP
MENU
j
Type of information
Program Service
DISPLAY
TOP
MENU
Contents of information are as follows.
q
VOLUME
ENTER
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
TV CH
d TUNER
f INFO
j Cursor B / C
j ENTER
j RETURN
q OPTION
Displays the name of the Radio Data
System program service currently
being received.
Displays the type of the Radio Data
System program currently being
received.
Radio Text
Displays the information on the
Radio Data System program
currently being received.
Clock Time
Displays the current time.
DSP Program
Displays the currently selected
sound field program.
ENT
TV
MUTE
Description
Program Type
INPUT
TV VOL
Press jENTER to start the search function.
Program Type
ENHANCER SUR. DECODE
RETURN
4
Status
10800
d
TUNER
BD
DVD
Frequency
Information on the display changes as you press the
key. The kind of information is displayed for a while
and then the information is displayed. J1
AUDIO
MOVIE
Front panel display (When “Program Type”
selected)
Audio Decoder
“Program Service,” “Program Type,” “Radio Text” and
“Clock Type” do not appear when the radio station
does not provide the Radio Data System service.
■ Automatic traffic information
reception (U.K. and Europe models
only)
When the tuner is active, this unit can automatically
search for and receive transmissions from traffic
information broadcast stations. To start this function:
1
2
Press dTUNER to switch to the tuner input.
When a traffic station is found, it will appear on the
display and the Option menu will close.
Press qOPTION to display the Option
menu. J2
OPTION
3
L
SL
SW
C
R
SR
L
SL
SW
C
R
SR
Traffic information broadcast station (Frequency)
If the receiver cannot find a traffic station, “TP Not
Found” will appear on the display, and the Option
menu will shortly close.
VOL.
TrafficProgram
Type, Radio Text, or Clock Time is displayed. That shows this
unit is receiving data (or stopping receiving data). If the data is
receivable, the corresponding information is displayed after a
while.
VOL.
STEREO
TUNED
TPFM101.30MHz
Use jCursor B / C to select
“TrafficProgram.”
OPTION
J 1 : “PTY Wait,” “RT Wait,” or “CT Wait” may appear when Program
FINISH
VOL.
VolumeTrim
Displays the currently selected
surround decoder.
• The transmission search will begin in approximately
5 seconds. Or, when the status indicator reads
“READY,” you can begin the search immediately by
pressing jENTER.
• By pressing jRETURN right before or during a
search, it will return to the Option menu.
• When the status is “READY,” use jCursor B / C to
start a search in the specified direction.
jCursor B: Searches upward from the current
frequency.
jCursor C: Searches downward from the current
frequency.
L
SL
SW
C
R
SR
J 2 : Refer to the “Configuring the settings specific for each input
source (Option menu)” (☞p. 44) for details on the Option menu.
En
38
PLAYBACK
Playing back tunes from your iPod™/iPhone™
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote
control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (☞p. 33) to give
compressed audio formats such as MP3 a sharper, more dynamic sound.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
d
•
•
•
•
iPod touch, iPod (Click and Wheel including iPod classic), iPod nano, iPod mini, iPhone, iPhone 3G, and iPhone 3GS are supported (As of March 2010).
When connecting an iPhone, please use a YDS-12.
Some features may not be compatible depending on the model or the software version of your iPod.
Some functions may not be available for some Yamaha iPod universal dock models. This explanation focuses on the YDS-12.
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
Connecting the Yamaha iPod
universal dock
OPTION
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
Use the dedicated cable to connect the dock to the
DOCK jack on the rear panel of this unit. Refer to the
operating instructions of the iPod universal dock for
information on how to connect your iPod/iPhone.
Switch this unit on and place your iPod/iPhone in the
dock. The unit is now ready for playback.
DOCK
VOL.
iPodconnected
L
SL
SW
C
R
SR
CAUTION
1
2
3
4
5
6
7
8
To prevent accidents, switch this unit to standby mode
before connecting an iPod universal dock.
DOCK
COMPONENT
VIDEO
PR
PB
9
0
10
VIDEO
ENT
Y
TV
INPUT
TV VOL
TV CH
Controlling an iPod™/iPhone™
After setting your iPod/iPhone in your dock, just press
dDOCK to switch to DOCK input to play your iPod/
iPhone.
The iPod/iPhone can be operated in the following two
ways.
Simple play mode:
Plays audio and video through this unit while viewing
the menu displayed on the iPod/iPhone screen.
Menu browse mode:
Plays the iPod/iPhone while viewing the menu displayed
on the front panel display.
MUTE
OPTICAL
COAXIAL
COAXIAL
AV 1
AV 2
AV 3
(CD)
d DOCK
Yamaha iPod universal dock
En
39
PLAYBACK
Playing back tunes from your iPod™/iPhone™
CODE SET
TRANSMIT
SOURCE
Use the following remote control keys to operate
(playback, stop, skip, etc.) your iPod/iPhone. You can
check song information on the iPod/iPhone screen. J1
RECEIVER
SLEEP
HDMI
1
2
1
2
3
4
3
4
AV
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
d
dDOCK
Switch to the DOCK (iPod) input.
jCursor B / C
Move the cursor up and down to different
fields.
jCursor D / E
Return to the previous menu or enter the
menu you have selected.
TUNER
FM
INFO
AM
f
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
jENTER
Enter the selected menu.
kDISPLAY
Switches between simple play mode or
menu browse mode.
kw
Searches backwards while held down.
kf
Searches forwards while held down.
kb
Skip to the beginning of the currently
playing song. Pressing repeatedly skips
one song backwards with each press.
ka
Skip to the beginning of the next song.
ks
Stops playback.
ke
Switches between playback and pause.
kp
Switches between playback and pause.
DIRECT
SCENE
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
Press kDISPLAY on the remote control to
change between menu browse mode and
simple remote mode, as required.
When you select menu browse mode, the front panel
display changes as follows.
DOCK
Music
VOL.
L
SL
SW
C
R
SR
STEREO
STRAIGHT
BD
DVD
2
DISPLAY
POP-UP
MENU
TOP
MENU
j
k
MUTE
REC
k
1
2
3
4
5
6
7
8
9
0
10
ENT
• Information on the iPod/iPhone can only be displayed
in alphanumeric characters. “_” (underscore) is
displayed for characters that this unit cannot display.
• When displaying play information in menu browse
mode, song information (Artist, Album, Song) is
displayed on the front panel. Change the displayed
information by pressing fINFO repeatedly.
• (Except iPod touch and iPhone) In menu browse
mode, the “Yamaha Mark” will be displayed on the
iPod/iPhone screen. You cannot directly control your
iPod/iPhone while this mark is displayed.
TV
INPUT
TV VOL
TV CH
MUTE
d DOCK
f INFO
j Cursor B / C / D / E
j ENTER
k DISPLAY
ks
ke
kp
kw
kf
kb
ka
1
Press dDOCK to switch to the DOCK input.
3
Select iPod/iPhone menu items using
jCursor B / C / D / E, and press jENTER
to play.
J 1 : Controls on the iPod/iPhone can also be operated in simple
playback mode.
En
40
PLAYBACK
Playing back tunes from your iPod™/iPhone™
CODE SET
TRANSMIT
SOURCE
■ Shuffle/Repeat playback
RECEIVER
SLEEP
You can use special playback functions such as shuffle
playback and repeat playback by first displaying the
Option menu.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
d
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
q
DISPLAY
POP-UP
MENU
TOP
MENU
k
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
j
1
2
3
4
Press dDOCK to switch to the DOCK input.
Press kDISPLAY to switch to menu browse
mode.
Press qOPTION to display the Option
menu. J1
Press jCursor B / C to select the desired
playback function, “Shuffle” or “Repeat,”
then press jENTER.
Shuffle
Plays back songs or albums in random order. When the
shuffle function is enabled, “
” appears on the TV
screen.
Off
Does not play back songs or albums in
random order.
Songs
Plays “Songs” back in random order.
Albums
Plays “Albums” back in random order.
ENT
TV
INPUT
TV VOL
TV CH
MUTE
Repeat
Plays songs or albums repeatedly.
d DOCK
j Cursor B / C / D / E
j ENTER
k DISPLAY
q OPTION
Off
Does not play back songs or albums
repeatedly.
One
Plays a “Song” back repeatedly.
All
When all “Songs” have completed
playback, returns to the start and repeats
playback.
When the repeat function is enabled, “
“ (All)” appears on the TV screen.
1
(One)” or
All
5
6
7
Press jCursor D / E to select the desired
playback function.
To close the Option menu, press qOPTION.
Play the iPod/iPhone.
1
2
3
Playback of the iPod/iPhone starts using the function
selected in step 5.
Press dDOCK to switch to the DOCK
input.
Press qOPTION to display the Option
menu.
Use jCursor B / C to display “Standby
Charge” and press jENTER.
OPTION
VOL.
StandbyCharge
To disable Shuffle/Repeat playback, redo the above
steps, and return settings to “Off.”
4
■ To charge the iPod/iPhone when this unit
is in standby mode
If you connect an iPod/iPhone to the iPod universal
dock the iPod/iPhone will always charge when this
unit is turned on.
This unit can charge an iPod/iPhone even when in
standby mode (iPod Standby Charge function).
Check the HDMI Through/iPod Charge indicator on
the front panel of this unit to check whether this unit
is charging an iPod/iPhone during in standby mode.
While charging an iPod/iPhone, the HDMI Through/
iPod Charge indicator lights. When Standby Through
function is off, the indicator goes out after the
charging is complete.
R
SR
Use jCursor D / E to switch the setting
to “Off.”
DOCK
VOL.
Charge;;;;;Off
5
SW
C
L
SL
SW
C
L
SL
R
SR
When setting is completed, press
qOPTION to close the Option menu.
To enable the Standby Charge function again, carry
out this procedure again and change the “Standby
Charge” setting back to “Auto.”
If necessary, you can also disable the iPod Standby
Charge function.
J 1 : Refer to the “Configuring the settings specific for each input
source (Option menu)” (☞p. 44) for details on the Option menu.
En
41
PLAYBACK
Playing back tunes from Bluetooth™ components
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible
portable music players. J1
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
NOTE
d
TUNER
FM
AM
INFO
MEMORY
e
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
DIRECT
When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection
you must carry out pairing on both this unit and on the Bluetooth component.
Connecting a Yamaha Bluetooth
wireless audio receiver
Pairing Bluetooth™ components
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
Use the dedicated cable to connect the dock to the
q DOCK jack on the rear panel of this unit.
The Bluetooth wireless audio receiver connection will be
j
complete when this unit is turned on.
Be sure to carry out pairing when connecting a Bluetooth
component for the first time, or when settings have been
deleted.
Refer to the operating instructions of your Bluetooth
component as necessary when carrying out pairing.
DISPLAY
POP-UP
MENU
TOP
MENU
The Yamaha Bluetooth wireless audio receiver can be
paired with up to eight Bluetooth components. When
the ninth device is paired, the pairing settings for the
device which has not been used for the longest period
of time will be deleted.
MUTE
REC
DOCK
COMPONENT
VIDEO
1
2
3
4
PR
5
6
7
8
PB
9
0
10
ENT
Y
4
DOCK
TV
TV VOL
TV CH
MUTE
OPTICAL
COAXIAL
COAXIAL
AV 1
AV 2
AV 3
(CD)
d DOCK
e MEMORY
j Cursor B / C
j ENTER
j RETURN
q OPTION
Yamaha Bluetooth
wireless audio receiver
CAUTION
To prevent accidents, switch this unit to standby mode
before connecting a Bluetooth wireless audio receiver.
1
2
3
Press qOPTION to display the Option menu
and use jCursor B / C to select “Pairing.”
OPTION
Pairing
L
SL
SW
C
R
SR
• To cancel pairing, press jRETURN.
• You can also press and hold eMEMORY on the front
panel to begin pairing.
5
Press dDOCK to switch to the DOCK input.
Turn on the Bluetooth component you want
to pair with and set it to pairing mode.
VOL.
Searching...
VIDEO
INPUT
Press jENTER to start pairing.
Make sure the Bluetooth component
recognizes the Bluetooth wireless audio
receiver.
When the device is recognized, it will appear in the
Bluetooth component list, for example as “YBA-10
YAMAHA.”
6
Select the Bluetooth wireless audio receiver
from the Bluetooth component list, and
enter a pass key “0000” into the Bluetooth
component. J2
When pairing occurs correctly
VOL.
L
SL
SW
C
R
SR
DOCK
VOL.
Completed
L
SL
SW
C
R
SR
J 1 : This unit supports A2DP (Advanced Audio Distribution Profile)
of the Bluetooth profile.
J 2 : Depending on Bluetooth components, wireless connection is
carried out right after the pairing. In this case, “BT connected” is
displayed instead of “Completed.”
En
42
PLAYBACK
Playing back tunes from Bluetooth™ components
CODE SET
TRANSMIT
SOURCE
Using Bluetooth™ components
RECEIVER
SLEEP
HDMI
1
2
1
2
3
4
3
4
AV
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
TUNER
FM
AM
INFO
MEMORY
PRESET
When pairing is complete, carry out the following
procedure to achieve a wireless connection between this
unit and the Bluetooth component. When the wireless
d connection is complete, you playback from Bluetooth
components.
Depending on Bluetooth components, a wireless
connection is established automatically or by
operating the Bluetooth components. In that case, it is
not necessary to carry out the following procedure.
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
q
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
j
1
2
Press dDOCK to switch to the DOCK input.
Press qOPTION to display the Option
menu.
3
Use jCursor B / C to select “Connect” and
press jENTER. J1
When wireless connection is complete
DOCK
BTconnected
VOL.
L
SL
SW
C
R
SR
“Not found” is displayed when there is an error
connecting. Check that the following conditions have
been satisfied, and try to establish a wireless
connection again.
• Both this unit and the Bluetooth component are paired.
• The Bluetooth component is switched on.
• The Bluetooth component is within 10 meters/32 feet
of the Bluetooth wireless audio receiver.
4
Operate the Bluetooth component for
playback.
To disconnect a wireless connection, repeat the same
steps, and in step 3, select “Disconnect.”
ENT
TV
INPUT
TV VOL
TV CH
MUTE
d DOCK
j Cursor B / C
j ENTER
q OPTION
J 1 : “Disconnect” is displayed when a Bluetooth component has been
connected.
En
43
SETUP
CODE SET
TRANSMIT
SOURCE
Configuring the settings specific for each input source (Option menu)
RECEIVER
SLEEP
HDMI
1
2
3
4
4
This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from
playback devices, and other frequently used menu items.
AV
1
2
3
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
AUDIO
d
Option menu display and setup
4
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
1
ENHANCER SUR. DECODE
STEREO
STRAIGHT
TV
CD
SETUP
RADIO
OPTION
q
VOLUME
ENTER
RETURN
2
j
POP-UP
MENU
The Option menu appears for the desired input source.
Option menu
OPTION
MUTE
VolumeTrim
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
TV
INPUT
TV VOL
TV CH
MUTE
3
Option menu items
The following menu items are provided for each input
source.
HDMI1-4
Press qOPTION.
DISPLAY
TOP
MENU
Parameters of the selected item are displayed. The
parameters you can set differ depending on the menu
items.
DIRECT
SCENE
BD
DVD
Use the dInput selector on the remote
control to select the Option menu you want
to display.
Select the desired menu item (or enable a
function) using jCursor B / C / D / E and
jENTER.
• You can also use jRETURN to return to the previous
screen or close the Option menu.
• Certain selected menu items may automatically close
the Option menu when their functions are carried out.
VOL.
AV1-2
AV3-4
L
SL
SW
C
R
SR
Select the desired control/setup item using
jCursor B / C and press jENTER.
The displayed Option menu items differ depending on
the input source.
For details, read the following Option menu items
section.
5
To close the Option menu, press qOPTION.
For a few seconds after closing the Option menu, the
remote control keys may not function. If this occurs,
reselect the input source.
Decoder Mode
EXTD
Surround
Audio In
Signal Info
Volume Trim
Decoder Mode
Audio In
Signal Info
Volume Trim
Decoder Mode
EXTD
Surround
Auto
Preset
EXTD
Surround
Signal Info
AV5-6
Volume Trim
AUDIO1-2
Volume Trim
V-AUX
Volume Trim
TUNER
Volume Trim
FM Mode
Clear Preset
TrafficProgram J1
Volume Trim
Shuffle
Repeat
Connect/
Disconnect
Pairing
iPod
(DOCK)
d Input selector
j Cursor B / C / D / E
j ENTER
j RETURN
q OPTION
Volume Trim
Bluetooth
(DOCK)
Standby Charge
Volume Trim
J 1 : U.K. and Europe models only.
En
44
SETUP
Configuring the settings specific for each input source (Option menu)
■ Adjusting volume between input sources
Volume Trim
Input source:
■ Selecting the 5.1-channel signal playback
method
EXTD Surround
All
Reduces any change in volume when switching between input
sources by correcting volume differences in each input source. You
can adjust this parameter for each input source.
Adjustable range
-6.0 dB to 0.0 dB to +6.0 dB
Default setting
0.0 dB
Adjustment
increments
0.5 dB steps
Input source:
HDMI1-4, AV1-4 J1
Selects whether to reproduce 5.1-channel input signals in 6.1- or
7.1-channel when surround back speakers are used.
Auto (Default)
Automatically selects the most suitable decoder if a
flag for reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-channel.
q PLIIx Movie
Always reproduces signals in 7.1-channel using the
Dolby Pro Logic IIx Movie decoder whether or not
surround back channel signals are contained. You can
select this parameter when two surround back
speakers are connected.
q PLIIx Music
Always reproduces signals in 6.1- or 7.1-channel
using the Dolby Pro Logic IIx Music decoder whether
or not surround back channel signals are contained.
You can select this parameter when one or two
surround back speakers are connected.
EX/ES
Automatically selects the most suitable decoder for
input signals whether or not the flag for reproducing
surround back channel is present, and always
reproduces signals in 6.1-channel.
Off
Always reproduces original channels whether or not
the flag for reproducing surround back channel is
present.
■ Setting the format of digital audio signals
Decoder Mode
Input source:
HDMI1-4, AV1-4 J1
Sets the format of digital audio to playback to DTS. For example, if
the format is not automatically detected correctly even during
playback of DTS format audio, this menu item can be used to set
the playback format to DTS.
Auto (Default)
The audio format is automatically selected to match
the format of the input audio.
DTS
Selects DTS signals only. Other input signals are not
reproduced.
J 1 : AV5-6 or AUDIO1-2 are also available when the “Audio Return Channel”
function is on, and the source is used for the TV audio input (TVAudio).
En
45
SETUP
Configuring the settings specific for each input source (Option menu)
■ Combining HDMI/AV1-2 input source
video and audio
Audio In
Input source:
HDMI1-4, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
– an playback device is connected with an HDMI cable but cannot
transmit audio through HDMI
– an playback device with component video output and analog
audio output (such as certain game consoles) are connected to the
system
• For details of settings, refer to “Receiving video signals from the
HDMI jack and audio signals from a jack other than HDMI”
(☞p. 17) and “Component connections to analog audio output
devices” (☞p. 18).
• To return audio inputs to their previous settings, display this item
again, and select the original input jack.
HDMI1
Audio;;;;;;AV1
L
SL
SW
C
R
SR
Assignable audio input jacks
To change assignments, select an input source (HDMI1-4 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
Audio inputs
Settings method
Optical digital audio
input
Select AV1 or AV4. Connect the external component
audio cable to the optical digital jack for the selected
input.
Coaxial digital audio
input
Select AV2 or AV3. Connect the external component
audio cable to the coaxial digital jack for the selected
input.
Analog audio input
Select one of AV5, AV6, AUDIO1, or AUDIO2.
Connect the external component audio cable to the
audio jack for the selected input.
Format of audio signals.
CHAN
The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, “3/2/0.1” is
displayed.
If a channel that cannot be expressed as the above, a
total number of channels such as “5.1ch” may be
displayed.
SAMPL
The sampling frequency of analog-to-digital
conversion.
B RATE
The bit rate of input signal per second.
signals
Signal Info
HDMI1-4, AV1-4 J1
Displays information on digital audio and video signals on the TV
screen.
VOL.
FORMAT
■ Displaying information on audio/video
Input source:
Inputs that change the audio source
Audio information
Menu item
FORMAT
VOL.
DolbyD
Information
L
SL
SW
C
R
SR
Video information
V IN
Format and resolution of video input signal.
V OUT
Format and resolution of video output signal.
V.MSG
(appears only
when an error
has occurred)
Error messages about HDMI signals and components.
Error message
HDCP Error
HDCP authentication failed.
Device Over The number of connected HDMI
components is over the limit.
• “No Signal” is displayed when no signals are being received, and
“---” is displayed if this unit cannot recognize the incoming
signal.
• The bit rate may vary during playback.
J 1 : AV5-6 or AUDIO1-2 are also available when the “Audio Return Channel”
function is on, and the source is used for the TV audio input (TVAudio).
En
46
SETUP
Configuring the settings specific for each input source (Option menu)
■ Changing FM mode (Stereo/Monaural)
FM Mode
Input source:
■ Shuffle playback with iPod/iPhone
Shuffle
TUNER
Sets this unit to automatically match FM broadcast frequencies in
stereo, or to convert the frequency to monaural (☞p. 35).
■ Automatically presetting FM radio
stations
Auto Preset
Input source:
DOCK (iPod)
Changes the shuffle playback style on iPod (☞p. 41).
■ Repeat playback with iPod/iPhone
Repeat
Input source:
DOCK (iPod)
Changes the repeat playback style on iPod (☞p. 41).
Input source:
TUNER
Automatically detects radio stations in the FM frequency and
registers them as preset stations (☞p. 35).
■ Clearing preset FM stations
Clear Preset
Input source:
TUNER
Clears the preset stations (☞p. 37).
■ Searching for traffic information
(U.K. and Europe models only)
TrafficProgram
Input source:
TUNER
Automatically searches for traffic information with the Radio Data
System (☞p. 38).
■ Connect / Disconnect Bluetooth
component
Connect
Disconnect
Input source:
DOCK (Bluetooth)
Switches communication with a Bluetooth component on and off
(☞p. 43).
■ Pairing Bluetooth component
Pairing
Input source:
DOCK (Bluetooth)
Performs pairing of this unit and a Bluetooth component (☞p. 42).
■ Charging an iPod™/iPhone™ in standby
mode
Standby Charge
Input source:
DOCK (iPod)
Charges an iPod/iPhone stationed in the iPod universal dock while
the receiver is in standby mode (☞p. 41).
En
47
SETUP
Setting various functions (Setup menu)
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
You can configure various function settings of this unit using the Setup menu.
HDMI
1
2
3
4
3
4
AV
1
2
Setup menu display and settings
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
1
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
STEREO
STRAIGHT
BD
DVD
TV
CD
RADIO
i
VOLUME
ENTER
RETURN
j
Speaker Setup
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
1
2
3
4
5
6
7
8
9
0
10
ENT
TV
Set functions related to HDMI, such as
HDMI Control functions.
Func. Setup
Sets functions such as changing input
names and auto power down that make
the unit easier to use.
DSP Parameter
Edit sound field programs.
Memory Guard
Protects settings against accidental
alteration.
TV CH
i SETUP
j Cursor B / C / D / E
j ENTER
j RETURN
Set parameters for speakers, such as
speaker status, and volume adjustment for
each speaker.
HDMI Setup
MUTE
2
L
SL
SW
C
R
SR
R
SR
Set functions related to audio output, such
as adjustment of maximum volume and
of dynamic range.
INPUT
TV VOL
L
SL
SW
C
Sound Setup
REC
VOL.
IniVol;;;;;Off
VOL.
Setup menu categories
OPTION
Use jCursor B / C to navigate the
submenus to find the desired setting and
press jENTER.
SOUND
;SpeakerSetup
DIRECT
SCENE
SETUP
Press iSETUP on the remote control.
SETUP
ENHANCER SUR. DECODE
3
4
5
When multiple menu item is displayed, use
jCursor B / C to select the desired item.
6
Press iSETUP to exit the Setup menu.
Use jCursor D / E to change the setting.
You can return to the previous screen by pressing
jRETURN. You can change other items by repeating
step 4 and 5.
For a few seconds after closing the Setup menu, the
remote control keys may not function. If this occurs,
reselect the input source.
Use the jCursor B / C to select the desired
menu and press jENTER.
SOUND
;Lipsync
VOL.
L
SL
SW
C
R
SR
Ex: Sound Setup menu
En
48
SETUP
Setting various functions (Setup menu)
Setup menu items
■ Manual speaker setup
Manages settings for speakers
Config
Setup menu
Speaker Setup
Config
Level
Distance
Equalizer
Test Tone
Sound Setup
Lipsync
Adaptive DRC
D.Range
Max Volume
Init Volume
HDMI Setup
Control
TVAudio J1
ReturnChan J1
Standby J1
Audio
Subwoofer
Front
Center
Sur. LR
Sur.B
Crossover
SWFR Phase
Extra Bass
(speakers)
(unit and speakers)
(speakers and frequency bands)
HDMI Auto
Auto
Manual
Func. Setup
Input Rename
AutoPowerDown
Dimmer
DSP Parameter
SETUP
Adjusts the output characteristics of the speakers based on
manually set parameters.
VOL.
;SpeakerSetup
L
SL
SW
C
R
SR
Speaker Setup submenu
Config
Manually manages speaker configuration, such as
speaker size (sound production capacity), and bass
audio processing.
Level
Manually adjusts the volume of each speaker.
Distance
Manually adjusts the output of each speaker based on
distance to the listening point.
Equalizer
Selects an equalizer to adjust speaker output
characteristics.
Test Tone
Generates test tones.
In the Config submenu, you can select the speaker size
characteristic (Large or Small). Select the size (sound
reproduction capacity) that matches your speakers.
Woofer diameter
• 16 cm or larger → Large
• 16 cm or smaller → Small
When speaker size is set to “Small,” low-frequency components
of the speakers that you configured are produced from the
subwoofer (or from the front speakers if there is no subwoofer).
Subwoofer
Confirms the subwoofer.
YES (Default)
Select this when you have a subwoofer connected.
During playback, the subwoofer will produce audio
from the LFE (low-frequency effect) channel and bass
audio from other channels. J2
NONE
Select this when you do not have a subwoofer
connected. The front speakers will produce audio
from the LFE (low-frequency effect) channel and bass
frequency audio from other channels.
Memory Guard
J 1 : This menu item appears depending on the “Control” setting.
J 2 : Enabling the “Extra Bass” setting allows both the subwoofer and the front
speakers to produce bass audio.
En
49
SETUP
Setting various functions (Setup menu)
Front
Selects the size (sound reproduction capacity) of the front
speakers. J1
Small (Default)
Large
Select this for small speakers. The subwoofer will
produce front channel low-frequency
components. J2
Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
Center
Selects the size of the center speakers.
None
Sur. B
Selects the size of the surround back speakers.
None (Default)
Select this when no surround back speakers are
connected.
SMLx1
Select when one small surround back speaker is
connected.
SMLx2
Select when two small surround back speakers are
connected.
LRGx1
Select when one large surround back speaker is
connected.
LRGx2
Select when two large surround back speakers are
connected.
Select this when there is no center speaker. The front
speakers will produce center channel audio.
Small (Default)
Select this when a small center speaker is connected.
Large
Select this when a large center speaker is connected.
Sur. LR
Selects the size of the surround speakers.
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel
audio signals.
Small (Default)
Select this when the surround speakers are small.
Large
Select this when the surround speakers are large.
• When set to “None,” no sound is produced from the surround
back speaker even if that speaker is connected.
• When set to “None,” the sound field programs will change to
Virtual CINEMA DSP mode.
• When there are no surround speakers are inactive, the setting will
automatically change to “None.”
• You can set surround back audio signals, including from the
playback source, to be mixed down and produced from a single
speaker (6.1-channel layout) or produced from left and right
surround back speakers (5.1-channel layout).
SWFR Phase
Sets the phase of the subwoofer if the bass audio is lacking or
unclear.
NRM (Default)
Does not change the subwoofer phase.
REV
Reverses the subwoofer phase.
Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
ON
The subwoofer and the front speakers produce the
front channel low-frequency components.
OFF (Default)
Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
When the “Subwoofer” is set to “None,” the “Extra Bass”
setting is disabled.
Crossover
Sets the lower limit of low-frequency component output from
speakers set to “Small.”
Audio with a frequency below that limit will be produced from the
subwoofer or the front speakers. J3
40Hz
110Hz
60Hz
120Hz
80Hz (Default)
160Hz
90Hz
200Hz
100Hz
J 1 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front
speaker setting is “Small” and you change “Subwoofer” to “None,” it will
automatically change to “Large.”
J 2 : You can set the low-frequency components of audio signals transmitted from
the front speakers to the subwoofer by using “Crossover” setting.
J 3 : If your subwoofer has a volume control or a crossover frequency control, set
the crossover frequency to maximum and the volume to half (or slightly less).
En
50
SETUP
Setting various functions (Setup menu)
■ Controlling the volume of each speaker
Level
■ Manually setting speaker distance
Distance
Separately adjusts the volume of each speaker. Use jCursor B / C
to select the desired speaker and adjust the volume with jCursor
D / E.
■ Adjusting sound quality with the equalizer
Equalizer
Adjusts the timing at which the speakers produce audio so that
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
FL
Front speaker L
FR
Front speaker R
C
Center speaker
SL
Surround speaker L
SR
Surround speaker R
SBL
Surround back L
SBR
Surround back R
Unit
Selects the distance unit (meters or feet).
SB J1
Surround back
Front L
Front speaker L
SWFR
Subwoofer
Front R
Front speaker R
Center
Center speaker
Use jCursor B / C to display “Unit,” and then use jCursor
D / E to choose the units of length (meters or feet).
Adjusts sound quality of tone using a parametric or graphic
equalizer.
EQ Select
Select an equalizer type.
PEQ
Uses the parametric equalizer to adjust sound quality.
Selecting this setting applies the tone settings
obtained using YPAO (☞p. 23). J2
GEQ (Default)
Uses the graphic equalizer to adjust sound quality. By
pressing jENTER, you can adjust the
characteristics of the graphic equalizer.
Off
Disables the equalizer.
Setting distances for each speaker
Use jCursor B / C to display the speaker you want to configure,
and then use jCursor D / E to set the distance from the speaker
to your listening position.
Adjustable range
-10.0 dB to +10.0 dB
Sur. L
Surround speaker L
Default setting
0 dB (FL/FR/SWFR)
-1.0 dB (C/SL/SR/SBL/SBR/SB)
Sur. R
Surround speaker R
Sur. B L
Surround back speaker L
Adjustment
increments
0.5 dB
Sur. B R
Surround back speaker R
Sur. B J1
Surround back speaker
SWFR
Subwoofer
Adjustable range
0.30 m to 24.0 m (1.0 ft to 80.0 ft)
Default setting
3.00 m (10.0 ft) (Front L/Front R/SWFR)
2.60 m (8.5 ft) (Center)
2.40 m (8.0 ft) (Sur. L/Sur. R/Sur.B L/Sur.B R/Sur.B)
Adjustment
increments
0.10 m (0.5 ft)
J 1 : “SB” and “Sur.B” is displayed when using a 6.1 channel configuration only.
J 2 : Using YPAO to carry out acoustic measurement selects “PEQ” automatically.
“PEQ” does not appear if the measurement process has not been carried out at
least once.
En
51
SETUP
Setting various functions (Setup menu)
■ Generating test tones
■ Adjusting the graphic equalizer
1
2
When “EQ Select” is displayed, use jCursor D / E
to select “GEQ” and press jENTER.
3
Raising volume: Press jCursor E.
Lowering volume: Press jCursor D.
Check that “Channel” selects and use jCursor D
/ E to select the speaker for which you want to
adjust the equalizer.
GEQ
Press jCursor C repeatedly to select the
frequency you want to adjust, then use jCursor D
/ E to adjust the volume.
GEQ
VOL.
63Hz
L
SL
SW
C
Channel;FRNT L
L
SL
Frequency band
R
SR
Off (Default)
Does not generate test tones.
On
Generates test tones. While “On” is selected, test
tones are produced constantly.
R
SR
VOL.
SW
C
Test Tone
Turns the test tone generator on or off.
Setting the volume level for the
selected frequency
The speaker you are adjusting
Frequency
range
63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/
16 kHz
Adjustable
range
-6.0 dB to 0 dB to +6.0 dB
Default setting
0 dB
Adjustment
increments
0.5 dB
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
graphic equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.
You can use jCursor B / C to select another frequency or
return to step 2. Repeat steps 2-3 to adjust the tone to your
liking.
4
When you have finished making adjustments,
press iSETUP to close the Setup menu.
En
52
SETUP
Setting various functions (Setup menu)
;SoundSetup
Lipsync
Adjusts the delay between audio and video output (Lipsync
function).
VOL.
L
SL
SW
C
R
SR
HDMI Auto
When connecting to a TV via HDMI, automatically adjusts output
timing if the TV supports an automatic lipsync function.
Sound Setup submenu
Off (Default)
Lipsync
Adjusts the delay between video and audio output.
Adaptive DRC
Auto-adjusting the sound level to make even low
volumes more audible.
D.Range
Selects the dynamic range adjustment method for
Dolby Digital and DTS playback.
Max Volume
Sets the maximum volume for this receiver.
Init Volume
Sets the initial volume for when this receiver is turned
on.
On
Select this when the connected monitor does not
support the automatic lipsync function or you do not
want to use the automatic lipsync function. Set the
correction time in “Manual.”
Select this when the monitor supports the automatic
lipsync function. Fine-adjust the correction time in
“Auto.”
Auto
Fine-adjust the audio output timing by entering the correction time
provided when “HDMI Auto” is set to “On.”
Adjustable range
0 ms to 240 ms
Adjustment
increments
1 ms
■ Auto-adjusting the sound level to make
even low volumes more audible
Adaptive DRC
Adjusts the dynamic range in conjunction with the volume level
(from minimum to maximum). When you play audio at night or at
low volumes, it is a good idea to set parameter to “Auto.” J1
Auto
Adjusts the dynamic range automatically.
Off (Default)
Does not adjust the dynamic range automatically.
When the “Auto” is selected, it adjusts the dynamic range as
follows.
Auto
Off
Input Level
Volume: low
Output Level
SETUP
■ Synchronizing audio/video output
Output Level
Setting the audio output function of this
unit
Auto
Off
Input Level
Volume: high
Manual
Manually adjusts the correction time. Select this when the monitor
does not support the automatic lipsync function or “HDMI Auto” is
set to “Off.”
Adjustable range
0 ms to 240 ms
Adjustment
increments
1 ms
Default setting
0 ms
J 1 : The Adaptive DRC setting is also effective when you use headphones.
En
53
SETUP
Setting various functions (Setup menu)
■ Auto-adjusting Dolby Digital and DTS
dynamic range
D.Range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.
Min/Auto
(Min) Sets the dynamic range suitable for low volume
or a quiet environment, such as at night, for bitstream
signals except for Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby TrueHD
signals based on input signal information.
STD
Adjusts the dynamic range for optimum volume for
regular home use.
Max (Default)
Produces audio without adjusting the dynamic range.
■ Setting the maximum volume
■ Setting the startup volume
Setting HDMI functions
Init Volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode. J1
Adjustable range
Off, Mute, -80 dB to +16.5 dB
Default setting
Off
Adjustment
increments
0.5 dB
SETUP
;HDMISetup
Adjustable range
-30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting
+16.5 dB
Adjustment
increments
5.0 dB
L
SL
SW
C
R
SR
HDMI Setup submenu
Control
Turns the HDMI Control on or off.
TVAudio J2
Chooses automatically selected audio input in
conjunction with TV operation when the HDMI
Control is turned on.
ReturnChan J2
Transmits audio/video output to the TV and audio
input from the TV through a single HDMI cable.
Standby J2
Selects whether HDMI audio/video signals will be
continue to be produced when this unit is on
standby.
Audio
Selects the audio output device connected to this
unit via HDMI jacks.
Max Volume
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
VOL.
J 1 : When you set the “Max Volume” at a lower level than “Init Volume,” the “Max
Volume” setting has priority.
J 2 : This menu item appears depending on the “Control” setting.
En
54
SETUP
Setting various functions (Setup menu)
■ Receiver operation via TV (HDMI Control)
Control
Set the HDMI Control function to “On” to operate devices
connected via HDMI. If the TV or other external components
support HDMI Control (ex. Panasonic VIERA Link), you can use
the remote controls of those devices to operate some of this unit’s
functions, and to synchronize this unit with the operation of those
devices.
Please refer to “Switching the input source on this unit
automatically when listening to TV audio” (☞p. 68) for
instructions.
Off (Default)
Sets HDMI Control to “Off.”
On
Sets HDMI Control to “On.” J1
If this unit is connected to HDMI devices that do not support the
HDMI Control function, these functions will not operate.
■ Selecting an input source to assign audio
input for the TV
• “TVAudio” is only displayed with the HDMI Control function
(Control) is set to “On.”
• Please refer to “Using the HDMI Control function” (☞p. 67) for
setting instructions.
■ Listening to TV audio via single HDMI
AV1 to AV6
Assigns any of the AV1-6 input source for the audio
input from the TV.
AUDIO1/AUDIO2
Assigns AUDIO1 or AUDIO2 input source for the
audio input from the TV.
Default setting
AV4
J 1 : When the HDMI Control is “On,” the Standby Through function is
automatically enabled. When this unit enters standby mode, the audio and
video signals from the last-selected HDMI input source will continue to be
transmitted to the TV.
during standby mode (Standby Through)
Standby
This function allows audio/video signals to continue to be
transmitted to a TV connected to HDMI jacks 1-4 even when this
unit is in standby mode.
cable (Audio Return Channel)
ReturnChan
You can enable or disable the Audio Return Channel function.
When using a TV that supports Audio Return Channel function and
the function is enabled, the TV’s audio output is transmit to this
unit via an HDMI cable.
The TV audio input to this unit is regarded as the input source
selected in “TVAudio.” J2
By means of this function, you do not need to connect the TV’s
audio output (digital audio output or analog audio output) to the
unit.
Off (Default)
Sets the Audio Return Channel to “Off.”
On
Sets the Audio Return Channel to “On.”
TVAudio
Select the input source that matches operations carried out on the
TV while the HDMI Control function is on.
When using a TV that supports Audio Return Channel function and
the function is enabled, the audio input for the TV is assigned to
the input source selected here. J2
■ Transmitting HDMI audio/video to the TV
When the TV audio is input to the unit using Audio Return
Channel, “TV” is displayed on the front panel display.
TV
AV4
Off (Default)
Sets Standby Through to “Off.”
On
Transmits audio/video signals from the selected
HDMI input source to the TV.
• When HDMI Control is “On,” Standby Through function is
automatically enabled and “Standby” is not displayed.
• When the Standby Through function is “On,” audio/video signals
will continue to be transmitted to the TV from the selected HDMI
input source when this unit is in standby mode. You can change
the HDMI input source to transmit signals during the standby
mode by using dHDMI1-4 on the remote control. When the
input source is changed, the HDMI Through/iPod Charge
indicator on the front panel blinks twice.
• When the Standby Through function is on, the HDMI Through/
iPod Charge indicator on the front panel lights during the standby
mode. When this indicator is lit, this unit consumes 1 to 3 W of
power.
VOL.
L
SL
SW
C
R
SR
• “ReturnChan” is only displayed with the HDMI Control function
(Control) is set to “On.”
• Please refer to “Single HDMI cable input to TV audio with Audio
Return Channel function” (☞p. 69) for setting instructions.
J 2 : While the Audio Return Channel function is on, the jack selected for the input
source cannot be used.
En
55
SETUP
Setting various functions (Setup menu)
■ Changing the output destination of HDMI
input audio signals
Audio
Choose whether to playback audio from an external component
such as a BD/DVD player connected via HDMI through this unit or
through a TV.
Amp (Default)
Outputs audio through this unit only. When this
setting is selected, the external component outputs an
audio format compatible with this unit.
TV
Outputs audio through a TV only. When this setting is
selected, the external component outputs an audio
format compatible with the TV. J1
Amp+TV
Outputs audio from the TV and this unit. When this
setting is selected, the external component outputs an
audio format compatible with this unit and TV.
“Audio” is only displayed with the HDMI Control function
(Control) is set to “Off.”
J 1 : When “TV” is selected, the speakers of this unit do not output sound.
En
56
SETUP
Setting various functions (Setup menu)
CODE SET
TRANSMIT
SOURCE
Making the receiver easier to use
RECEIVER
SLEEP
HDMI
1
2
3
4
3
4
AV
1
2
SETUP
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
VOL.
;Func.Setup
L
SL
SW
C
R
SR
2
3
Select the input source that you want to
rename using jCursor B / C.
Use jCursor D / E to select a new name
from the following templates.
2
3
Select the input source that you want to
rename using jCursor B / C.
Press jENTER.
TUNER
FM
INFO
Func. Setup submenu
AM
MEMORY
Blu-ray
Satellite
Input Rename
Changes the input source names.
DVD
VCR
AutoPowerDown
Goes enter standby mode if you leave it
without operating.
SetTopBox
Tape
Game
MD
TV
PC
DVR
iPod
CD
HD DVD
CD-R
(blank)
HDMI1
VOL.
HDMI1
SW
C
L
SL
R
SR
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
i
Dimmer
Sets the brightness of the front panel
display.
OPTION
VOLUME
ENTER
RETURN
j
■ Changing input source names
Cursor
4
The following characters are available for input
source.
DISPLAY
Input Rename
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
Changes the input source names to be displayed on the
front panel display.
You can change an input source name by choosing from
a list of templates, or make one of your own.
4
■ Selecting a template
INPUT
TV VOL
TV CH
MUTE
1
Select “Input Rename” from the Setup
menu and press jENTER.
HDMI1
i SETUP
j Cursor B / C / D / E
j ENTER
j RETURN
HDMI1
Renaming the input source
■ Entering an original name
VOL.
L
SL
SW
C
R
SR
1
•
•
•
•
Confirm the new display name by
pressing jRETURN. Press iSETUP to
exit the Setup menu.
To cancel a name change, select the original name
and then press jRETURN to exit renaming.
TV
HDMI1
5
6
A to Z, a to z
0 to 9
Symbols (#, *, -, +, etc.)
Space
Repeat step 4 until you have entered the
new input source name.
Confirm the new display name by
pressing jENTER. Press iSETUP to
exit the Setup menu.
To cancel a name change, press jRETURN.
Select “Input Rename” from the Setup
menu and press jENTER.
HDMI1
Use jCursor B / C to select the
characters you want to change, and use
jCursor D / E to enter those characters.
VOL.
L
SL
SW
C
R
SR
Renaming the input source
En
57
SETUP
Setting various functions (Setup menu)
■ Goes enter standby mode automatically
when you leave it without operating
AutoPowerDown
■ Setting the brightness of the front panel
display
You can set the parameters for the sound field programs (☞p. 59).
Dimmer
If you do not operate this unit or use the remote control for an
extended period of time, it will automatically go into standby mode
(Auto Power Down function). This function’s default setting is
“Off.” When you want to enable this function, set the amount of
time to pass before this unit will enter standby.
Off (Default)
Auto Power Down function is disabled.
4hours
Goes into standby mode, when you have not operated
this unit for four hours.
8hours
Goes into standby mode, when you have not operated
this unit for eight hours.
12hours
Goes into standby mode, when you have not operated
this unit for twelve hours.
This unit starts a countdown of 30 seconds before entering the
standby mode. Pressing any key of the remote control during the
countdown cancels entering the standby mode and reset the
timer.
Setting the sound field program
Sets the brightness of the front panel display. Lowering the setting
dims the display.
Adjustable range
-4 to 0
Default setting
0
SETUP
VOL.
;DSPParameter
L
SL
SW
C
R
SR
Prohibiting setting changes
SETUP
;Memory Guard
VOL.
L
SL
SW
C
R
SR
Prohibits setting changes to prevent careless changes being made
to the settings on Setup menu.
Off (Default)
Settings are not protected.
On
Prohibits changes to the settings on Setup menu until
it is returned to “Off.”
While set to “On,” the unit displays “Memory
Guard!” when an attempt is made to change the
settings.
En
58
SETUP
Setting sound field program parameters
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters).
To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
1
2
TUNER
FM
AM
INFO
MEMORY
Press iSETUP to display the Setup menu.
MUSIC
STEREO
STRAIGHT
SETUP
DIRECT
BD
DVD
TV
CD
SETUP
RADIO
i
VOLUME
j
OPTION
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
VOL.
;DSPParameter
SCENE
3
2
3
4
5
6
7
8
9
0
SW
C
R
SR
L
SL
SW
C
To set the parameters of the sound field program back
to default, press jCursor C repeatedly during
editing to select “Initialize” and press jCursor E.
When following message is displayed, press
jCursor E again to initialize.
DSPPRM
Press Again
VOL.
Sci-Fi
1
L
SL
Use jCursor D / E to choose the sound
field program you want to edit.
DSPPRM
MUTE
REC
Once you have completed editing, press
iSETUP to close the Setup menu.
■ To initialize the sound field parameters
Use jCursor B / C to select “DSP
Parameter” and press jENTER.
ENHANCER SUR. DECODE
MOVIE
5
R
SR
VOL.
L
SL
SW
C
R
SR
To cancel operations, press jCursor D when “Press
Again” appears and return to the original display.
Sound field program to be edited
10
ENT
TV
INPUT
TV VOL
TV CH
MUTE
i SETUP
j Cursor B / C / D / E
j ENTER
4
Press jCursor B / C to select the
parameter that you want to change, and
press jCursor D / E to change the
parameter.
DSPPRM
VOL.
DSPLevel;;0dB
Sound field parameter
L
SL
SW
C
R
SR
Choices
When there are multiple parameters in the sound field
program you are configuring, repeat step 4 as
necessary to change other parameters.
En
59
SETUP
Setting sound field program parameters
CINEMA DSP parameters
Parameters usable in certain sound field
programs
<Dolby PLIIx Movie>
2ch Stereo only
<Neo:6 Cinema>
Selects a surround decoder to be used with a sound field program
in the MOVIE category. J1
Dolby PLIIx Movie
(Dolby PLII Movie)
Selects the Dolby Pro Logic IIx Movie (or
Dolby Pro Logic II Movie) decoder.
Neo:6 Cinema
Selects the Neo:6 (Cinema) decoder.
DSP Level
Direct
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
Auto (Default)
Off
Change the effect level (level of the sound field effect to be added).
You can adjust the level of the sound field effect while checking the
sound effect.
Adjustable range
-6 dB to 0 dB to +3 dB
Default setting
0 dB
Adjust “DSP Level” as follows:
• The effect sound is too soft.
• There are no differences between effects of the sound field
programs.
→ Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→ Reduce the effect level.
J 1 : Surround decoders cannot be changed when used with the following MOVIE
Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of “Bass” and
“Treble” are set to 0dB.
Does not bypass the DSP circuit and tone control
circuit.
SR Level
Adjusts the volume of the surround R channel. J2
Adjustable range
0 to 100%
Default setting
100%
SB Level
Adjusts the volume of the surround back channel. J2
Adjustable range
0 to 100%
Default setting
35% (7.1-channel configuration)
50% (6.1-channel configuration)
Straight Enhancer/7ch Enhancer only
EFCT LVL
7ch Stereo only
Adjusts the effect level of the compressed music enhancer mode.
CT Level
Adjusts the center channel volume. J2
Adjustable range
0 to 100%
Default setting
100%
High (Default)
Standard effect.
Low
Sets when the high-frequency signals of the source are
emphasized excessively.
SL Level
Adjusts the volume of the surround L channel. J2
Adjustable range
0 to 100%
Default setting
100%
J 2 : Not displayed when speakers are set to be inactive.
sound field programs.
• Mono Movie
• Sports
• Action Game
• Roleplaying Game
En
60
SETUP
Setting sound field program parameters
Parameters usable in surround decoder
When Neo:6 Music is selected
Dolby PLIIx Music and Dolby PLII Music only
Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as
necessary.
C.Image
Panorama
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Off (Default)
Disables the effect.
On
Enables the effect.
Adjustable range
0.0 to 1.0
Default setting
0.3
CT Width
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
Adjustable range
0 to 7
Default setting
3
Dimension
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
Adjustable range
-3 to STD to +3
Default setting
STD (Standard)
En
61
SETUP
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
b
c
You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).
The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
HDMI
1
2
3
4
3
4
AV
1
2
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
Controlling other components with the remote control
d Selecting input source connected to DVD
player
Keys connecting external
components
Default remote control code
settings
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
DVD player
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
RETURN
POP-UP
MENU
Selecting input source connected to CD
player
MUTE
REC
1
CD player
j
DISPLAY
TOP
MENU
Playback/Stop
q
VOLUME
ENTER
i
k
2
5
6
9
0
3
7
10
DVD player
4
8
l
TV VOL
TV CH
m
Playback/Stop
MUTE
CD player
b TRANSMIT
c SOURCE A
d Input selector
i SETUP
j Cursor B / C / D / E
j ENTER
j RETURN
k External component
cSOURCE A
Switches an external component on and off.
jCursor, jENTER, jRETURN
Operates the menus of external components.
kDISPLAY
Switches an external component display.
kExternal component operation keys
Functions as a recording or playback key of an external
component, or a menu display key.
lNumeric keys
Functions as numeric keys of an external component.
ENT
TV
INPUT
The remote control keys for controlling external
components are available only when the external
components have corresponding control keys.
If you are unable to operate this unit after operating an
external component, press iSETUP or qOPTION
and then try operating the remote control again.
mTV control keys J1
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, please refer to “Remote
Control Code Search” in the CD-ROM.
Input
Category
Manufacturer
Remote
control code
HDMI1
Blu-ray player/
recorder
Yamaha
2064
HDMI2
—
—
—
HDMI3
—
—
—
HDMI4
—
—
—
AV1
—
—
—
AV2
—
—
—
AV3
CD player
Yamaha
5095
AV4
—
—
—
AV5
—
—
—
AV6
—
—
—
mINPUT
Switches video inputs of TV.
AUDIO1
—
—
—
mMUTE
Mutes TV volume temporarily.
AUDIO2
—
—
—
mTV VOL +/-
Controls the volume of TV.
V-AUX
—
—
—
mTV CH +/-
Switches TV channels.
A/B J2
—
—
—
mA
Turns on and off TV.
DOCK
DOCK
Yamaha
5089
TUNER
Tuner
Yamaha
5085
operation keys
k DISPLAY
l Numeric keys
m TV control keys
m INPUT
m MUTE
m TV VOL +/m TV CH +/mA
q OPTION
J 1 : You can register remote control codes for external components to
dInput selector and remote control codes for TVs in mA
(mTV control keys).
To register a TV remote control code to dInput selector:
You can use the jCursor, lNumeric keys, and mTV
To register a remote control code for a device other than a TV to
dInput selector:
You can use the jCursor and lNumeric keys etc to control
external components, and the mTV control keys to control
TVs registered in mA.
J 2 : Use A/B for external component operations only. Set these keys to
remote control codes if you want to perform external component
operations without linking to input source selection of this unit.
For example, it may be convenient to assign remote control codes
for devices such as TVs.
control keys to control a TV you have registered.
En
62
SETUP
Controlling other components with the remote control
CODE SET
TRANSMIT
SOURCE
n
RECEIVER
SLEEP
MI
1
2
1
2
3
4
3
4
d
Registering remote control codes
for external component operations
AV
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
TUNING
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
h
OPTION
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
l
1
ENT
TV
INPUT
TV VOL
TV CH
MUTE
• Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
• Remote control code of an external component cannot
be set from the name or model number of a unit. Use
“Remote Control Code Search” in the CD-ROM to
search the available remote control codes from the
category or manufacturer of external components.
• If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
codes.
m
Use “Remote Control Code Search” in the CDROM to search the available remote control
codes from the category or manufacturer of
external components.
“2064” can be used for a Yamaha BD player.
4
Enter a remote control code “2064” using
lNumeric keys. J2
2
blinks twice
6
0
4
Once the remote control code is registered successfully
the remote control will blink twice.
TRANSMIT
AM
PRESET
INFO
Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
The following section describes how to register remote
control code using an example of the registration of the
remote control codes of a Yamaha BD player connected
to HDMI2 jack.
TUNER
FM
2
SOURCE
CODE SET
RECEIVER
Registration successful: blinks twice
Registration failed: blinks 6 times
SLEEP
HDMI
3
Press dHDMI2 on the remote control to
switch the input source to HDMI2. J1
TRANSMIT
SOURCE
CODE SET
RECEIVER
SLEEP
Perform the following steps to register the selected
input source here to the remote control code.
HDMI
• If the registration fails, repeat the step 2.
• In case of an external component with multiple remote
control codes, the other remote control codes may be
supported. Repeat from step 2 with the other remote
control codes.
5
To switch between BD player linked to
scene selections, press hSCENE and at the
same time press dHDMI2 and hold it for
approximately 3 seconds.
Then you can operate the external components by
switching the input source to HDMI2, or selecting
HDMI2 in the registered scene.
d HDMI2
h SCENE
l Numeric keys
m TV control keys
mA
n CODE SET
Same steps for operating other external components,
press hSCENE and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
J 1 : When you want to register a remote control code to the mTV
control keys, press mA (mTV control keys) in step 3.
J 2 : When you want to register a remote control code to the mTV
control keys, enter the TV remote control code in step 4.
En
63
SETUP
Controlling other components with the remote control
CODE SET
TRANSMIT
SOURCE
n
RECEIVER
SLEEP
Resetting all remote control codes
HDMI
1
2
1
2
3
4
3
4
Resetting all remote control codes for external
components to the initial factory settings.
AV
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
TUNING
ENHANCER SUR. DECODE
STRAIGHT
TV
CD
SETUP
DIRECT
1
RADIO
OPTION
i
Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
1
Once the remote control code is reset successfully the
remote control will blink twice.
Reset successful: blinks twice
Reset failed: blinks 6 times
POP-UP
MENU
SOURCE
CODE SET
RECEIVER
HDMI
blinks twice
If setup fails, repeat from step 1.
DISPLAY
TOP
MENU
TRANSMIT
SLEEP
VOLUME
ENTER
RETURN
8
9
STEREO
SCENE
BD
DVD
Enter “9981” using lNumeric keys.
9
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
TUNER
FM
3
TRANSMIT
MUTE
REC
SOURCE
CODE SET
RECEIVER
SLEEP
HDMI
1
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
ENT
l
2
Press iSETUP on the remote control.
TV CH
MUTE
i SETUP
l Numeric keys
n CODE SET
En
64
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
3
Use PROGRAM l / h to select the item to be set
from the following items.
Setting the impedance of speakers
(U.S.A. and Canada models only)
In the Advanced Setup menu, you can set the following settings.
1
2
Switch this unit to the standby mode.
Press A while pressing and holding STRAIGHT on
the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu items are
displayed.
A
STRAIGHT
YPAO MIC
INFO
MEMORY
PRESET
FM
AM
SCENE
BD
DVD
PHONES
INPUT
TONE CONTROL
TV
CD
PROGRAM
RADIO
SP IMP. J1
Sets the impedance of speakers.
REMOTE ID
Changes the remote control ID of a receiver.
TU J2
Selects one of the following FM/AM frequency steps.
INIT
Initializes various settings for this unit.
4
5
Press STRAIGHT repeatedly to select the value you
want to change.
SPIMP.-8MIN
Changes the unit settings depending on the impedance of the
speakers connected. J3
6 MIN
Select the impedance when 6Ω speakers are
connected.
8 MIN (Default)
Select the impedance when speakers above 8Ω are
connected.
Switch this unit to the standby mode, and then
switch it on again.
The settings become effective and the unit is powered on. If
initialization is selected, it will be performed when the unit is
powered on again.
STRAIGHT
SILENT CINEMA
PROGRAM l / h
J 1 : U.S.A. and Canada models only.
J 2 : Asia and General models only.
J 3 : For detailed procedures of speaker impedance settings, refer to “(U.S.A. and
Canada models only) Changing speaker impedance” (☞p. 12).
En
65
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
CODE SET
TRANSMIT
SOURCE
n
RECEIVER
SLEEP
HDMI
1
2
1
2
3
4
3
4
AV
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
■ To change the remote control ID
Changing FM/AM frequency steps
(Asia and General models only)
Perform each of the following steps within
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
TU-AM9/FM50
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
PRESET
ENHANCER SUR. DECODE
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
RADIO
OPTION
VOLUME
ENTER
RETURN
DISPLAY
POP-UP
MENU
TOP
MENU
REMOTEID-ID1
TUNING
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
i control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
MUTE
ID1 (Default)
Receives the remote control signals set in
ID1.
ID2
Receives the remote control signals set in
ID2.
REC
1
2
3
4
5
6
7
8
9
0
10
TV
INPUT
TV VOL
TV CH
MUTE
l
1
2
3
Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
You can select one of the following FM/AM frequency
steps: J1
AM10/FM100
You can adjust the AM frequency by
steps of 10kHz and FM by steps of
100kHz.
AM9/FM50
(Default)
You can adjust the AM frequency by
steps of 9kHz and FM by steps of 50kHz.
Press iSETUP on the remote control.
Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using lNumeric keys.
Initializing various settings for this
unit
To switch to ID2:
Enter “5020” using lNumeric keys.
Once the remote control code is registered
successfully the remote control will blink twice.
ENT
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
Registration successful: blinks twice
Registration failed: blinks 6 times
TRANSMIT
i SETUP
l Numeric keys
n CODE SET
SOURCE
CODE SET
INIT-CANCEL
Initializes various settings stored in this unit and sets it
back to default.
Select the items to be initialized from the following.
DSP PARAM
Initializes all parameters for the sound
field programs.
ALL
Resets this unit to default factory settings.
CANCEL (Default)
Does not initialize.
RECEIVER
SLEEP
HDMI
• If setup fails, repeat from step 1.
• Returns to ID1 after the remote control code is
initialized (☞p. 64).
J 1 : For details on setting FM/AM frequency steps, refer to “FM/AM
tuning” (☞p. 34).
En
66
SETUP
Using the HDMI Control function
This unit supports the HDMI Control function, which allows you to
operate external components via HDMI. If you connect devices
that support HDMI Control (ex. Panasonic VIERA Linkcompatible TVs, DVD/Blu-ray Disc recorders, etc.) J1, you can
use the following operations with the remote control of any of
those devices:
– Power synchronization (on/standby)
– Volume control, including Mute
– Changing the volume of the audio output signal device (either the
TV or this unit)
1
2
3
Connect the TV, DVD recorder supporting HDMI
Control to this unit’s HDMI output jack.
Turn on the TV and this unit.
7
If DVD recorder that supports the HDMI Control
function are connected to this unit, turn them on.
Receiver unit
Confirm that the input source for the DVD recorder
has been selected. If a different input source has been
selected, please change it manually.
TV/DVD Recorder
Confirm that the video signal from the recorder is
being properly received by the TV.
Refer to the TV’s instruction manual on how to operate external
components.
Set the TV and this unit’s HDMI Control function to
“On.”
Operations 1-7 will not be required more than twice.
TV
Control signal
(such as volume control)
HDMI connection
Receiver unit
Confirm that “Control” in the Setup menu (HDMI
Setup) is set to “On” (☞p. 55). J2
TV/DVD Recorder
Check the instruction manuals for those devices.
4
Turn the TV off.
5
Turn the TV on.
6
Change the TV’s input setting to the input jack that
is connected to this unit (ex. HDMI1).
HDMI
Remote control of TV
This unit
NOTE
Other synchronized HDMI Control devices are turned off with the
TV. If they are not synchronized, turn them off manually.
Confirm that this unit has turned on in conjunction with the TV. If
it is still off, turn it on manually.
8
Confirm that this unit is properly synchronized with
the TV through the following operations by using the
TV remote control.
• Power On/Off
• Volume Control
• Switching between audio output devices
If this unit is not synchronized to the TV’s power operations,
check that the HDMI Control function is set to “On” for both
devices.
If they will not properly synchronize, unplugging and replugging the devices and turning them on and off may solve the
problem.
The following is an example of how to connect this unit, a TV,
and a DVD recorder. Follow the instructions in your TV and
DVD recorder manuals, as well as the ones written below.
– Set the TV’s HDMI Control function to “On”
– Follow the AV amplifier connection instructions, and connect
this unit to the TV
J 1 : We recommend that you use TVs and DVD/BD recorders from the same
manufacturer whenever possible.
J 2 : The default setting for the HDMI Control function is “Off.”
En
67
SETUP
Using the HDMI Control function
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
1
2
1
2
3
4
3
4
AV
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
TUNER
FM
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
■ Switching the input source on this
To use other jacks to input audio signals from TV, carry
out the following procedure.
When the HDMI Control (☞p. 67) is operating properly,
the input source of this unit is automatically changed to
match operations carried out on the TV. The default
input jack is AV4. If the AV4 optical digital jack is
connected to the TV’s audio output jack, then you can
enjoy TV sound through this unit right away.
1
2
unit automatically when listening
to TV audio
HDMI
TUNING
ENHANCER SUR. DECODE
Connect this unit and the TV with an HDMI
cable.
HDMI
Audio output
(Optical)
DIRECT
ARC
SCENE
TV
5
CD
SETUP
RADIO
i
HDMI 1
ANTENNA
OPTICAL
COMPONENT
VIDEO
COMPONENT
VIDEO
FM
Input jack
Optical digital audio output
AV1 or AV4 (default)
Coaxial digital audio output
AV2 or AV3
Analog stereo output
AV5, AV6, AUDIO1, or AUDIO2
HDMI 2
GND AM
OPTION
75ǡ
PB
VIDEO
VIDEO
Y
R
SR
VOLUME
ENTER
j
TV
O
DISPLAY
POP-UP
MENU
TOP
MENU
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
OPTICAL
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
6
Available input jacks
MUTE
REC
(BD/DVD)
HDMI 1
ANTENNA
FM
4
7
R
SR
PR
75ǡ
8
VOL.
TVAudio;;;;AV4
GND AM
PR
PB
6
H
COMPONENT
VIDEO
COMPONENT
VIDEO
3
SW
C
Press jCursor C to select “TVAudio” and
select the input jack connected in step 2
using jCursor D / E.
HDMI
ARC
HDMI OUT
DOCK
2
L
SL
Y
MONITOR OUT
5
SW
C
VOL.
Control;;;;;On
PR
O
PB
1
L
SL
Make sure that “Control” is selected, and
then use jCursor D / E to select “On.”
HDMI
TV output jack
(BD/DVD)
HDMI OUT
DOCK
PR
RETURN
VOL.
Control;;;;Off
Connect TV’s audio output to this unit.
The input jacks listed below are available to input TV’s
audio signals. Use the same jack type as used for the
TV.
Use jCursor B / C to select “HDMI Setup”
and press jENTER.
STEREO
STRAIGHT
BD
DVD
4
L
SL
SW
C
R
SR
PB
V
VIDEO
Y
Y
MONITOR OU
9
0
10
ENT
TV
INPUT
OPTICAL
TV VOL
TV CH
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
(TV)
AV 3
AV 4
MUTE
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
7
Press iSETUP when you have finished
changing the settings.
If the TV hereafter transmits audio output signals, this
unit will automatically switch to the input source
chosen in step 6.
3
i SETUP
j Cursor B / C / D / E
j ENTER
Press iSETUP. J1
J 1 : Refer to the “Setting various functions (Setup menu)” (☞p. 48)
for details on the Setup menu.
En
68
SETUP
Using the HDMI Control function
CODE SET
TRANSMIT
SOURCE
■ Single HDMI cable input to TV
RECEIVER
SLEEP
1
2
1
2
3
4
3
4
AV
When using a TV that supports HDMI functions and
Audio Return Channel function, audio/video output
from this unit to the TV or audio output from the TV to
this unit can be transmitted through a single HDMI cable
(Audio Return Channel function). Audio signals
transmitted from the TV to this unit can be assigned to
any input source.
AUDIO
5
6
1
2
V-AUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
TUNER
FM
AM
INFO
MEMORY
MOVIE
MUSIC
ENHANCER SUR. DECODE
Use jCursor B / C to select “HDMI Setup”
and press jENTER.
HDMI
VOL.
Control;;;;Off
4
L
SL
SW
C
R
SR
Make sure that “Control” is selected, and
then use jCursor D / E to select “On.”
STEREO
STRAIGHT
DIRECT
SCENE
BD
DVD
3
audio with Audio Return Channel
function
HDMI
TV
CD
SETUP
RADIO
i
VOLUME
j
1
HDMI
Connect this unit and the TV with an HDMI
cable.
VOL.
Control;;;;;On
L
SL
SW
C
R
SR
OPTION
ENTER
RETURN
TV
5
Press jCursor C to select “TVAudio” and
select the input source that you want to
assign to the HDMI audio signals from the
TV using jCursor D / E. J2
TV audio
output
6
Press jCursor C to select “ReturnChan”
and press jCursor E to select “On.”
HDMI
DISPLAY
HDMI
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
Video / Audio
output
The Audio Return Channel function will turn on.
HDMI
ENT
SPEAK
TV
INPUT
TV VOL
TV CH
HDMI 1
ANTENNA
FM
HDMI
(BD/DVD)
HDMI OUT
MUTE
HDMI 2
HDMI 3
HDMI 4
FRONT
COMPONENT
VIDEO
CENTER
ReturnChan;;On
GND AM
PR
75ǡ
2
L
SL
SW
C
R
SR
PB
VIDEO
i SETUP
j Cursor B / C / D / E
j ENTER
VOL.
VIDEO
Press iSETUP. J1
7
Press iSETUP when you have finished
changing the settings.
If the TV hereafter transmits audio output signals, this
unit will automatically switch to the input source
chosen in step 6.
J 1 : Refer to the “Setting various functions (Setup menu)” (☞p. 48)
for details on the Setup menu.
J 2 : While the Audio Return Channel function is on, the jack selected
for the input source cannot be used.
En
69
APPENDIX
Troubleshooting
Refer to the table below when this unit does not function properly.
If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service
center.
General
Problem
Cause
Remedy
See
page
The power will not
turn on.
The protection circuitry operated
3 times consecutively.
As a safety precaution, when the protection
circuitry operates 3 times consecutively, the
capability to turn on the power is disabled.
Please contact your nearest Yamaha dealer
or service center to request repair.
—
The unit enters
standby mode soon
after the power is
turned on.
The power cable is not completely
inserted.
Connect the power cable properly to an AC
wall outlet.
—
(When this unit is turned back on
and “CHECK SP WIRES!” is
displayed.) The protection
circuitry has been activated
because this unit was turned on
while a speaker cable was shorted.
Make sure that all speaker cables between
this unit and speakers are connected
properly.
12
The internal microcomputer is
hung-up due to an external electric
shock (such as lightning or
excessive static electricity) or by a
drop in power supply voltage.
Disconnect the power cable from the AC
wall outlet, wait about 30 seconds and then
plug it in again.
—
The batteries in the remote control
may have lost their charge.
Replace all batteries.
4
The protection circuitry has been
activated because of a short circuit,
etc.
Check that the speaker with an impedance
of at least 6Ω.
—
(U.S.A. and Canada models)
Check that the speaker impedance settings
are correct.
12
This unit cannot be
turned off or does
not work properly.
The unit enters
standby mode.
Problem
Cause
Remedy
See
page
After display of a
countdown on the
front panel, the unit
goes into standby
mode.
If you do not use take any action,
the Auto Power Down function
operates.
Turn on the unit, and play the source again.
—
In the Setup menu “AutoPowerDown”
(“Func. Setup” → “AutoPowerDown”),
increase the time until switching to standby
mode, or turn off the Auto Power Down
function.
58
Sound/images
suddenly go off.
The protection circuitry has been
activated because of a short circuit,
etc.
Check that the speaker wires are not
touching each other, then turn the unit back
on.
—
The sleep timer has turned off the
unit.
Turn on the unit, and play the source again.
—
En
70
APPENDIX
Troubleshooting
Problem
No sound.
No picture.
Cause
Remedy
See
page
Incorrect input or output cable
connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
17
If a DVI-HDMI cable is used to
connect the unit with an external
component, then it is necessary to
use an audio input jack for a
different input to output audio.
Display the HDMI Input Option menu for
the connected cable, select “Audio In,” and
select the jack to use for audio input.
46
Speaker connections are not
secure.
Secure the connections.
12
The HDMI components connected
to the unit do not support the
HDCP copy protection standards.
Connect HDMI components that support the
HDCP copy protection standards.
46
The audio input into the device is
set to playback through the TV.
In the Setup menu, set the HDMI Audio Out
(“Sound Setup” → “Audio”) to other than
“TV.”
56
No appropriate input source has
been selected.
Select an appropriate input source with
Input selector.
28
The volume is turned down or
muted.
Turn up the volume.
—
Signals that this unit cannot
reproduce are being input from a
source component, such as a CDROM.
Use an input source that has signals that can
be reproduced on this unit.
—
An output video jack type used to
display content on the TV is
different from the one of the input
video (ex. Video input → HDMI
output).
Use video jacks of the same type (ex. Video
input → Video output) to connect to the TV.
15
An appropriate video input is not
selected on the TV.
Select an appropriate video input on the TV.
Problem
No sound is output
from a specific
speaker.
—
Only the center
speaker outputs
substantial sound.
Cause
See
page
Remedy
The speaker is malfunctioning.
Check the Speaker indicators on
the front panel display. If the
corresponding indicator lights up,
connect another speaker and check
if sound is output.
If sound is not output, the unit may be
malfunctioning.
The playback component or
speakers are not connected
properly.
Connect the cables properly. If the problem
persists, the cables may be defective.
12, 17
Output from that speaker is
disabled.
Check the Speaker indicators on the front
panel display. If the corresponding indicator
is turned off, try the following.
1) Change to a different input source.
2) With the selected sound field program,
sound is not output from that speaker. Select
another sound field program.
3) “None” may have been selected for that
speaker on this unit. Display “Speaker
Setup” in the Setup menu, and set respective
parameters to enable output from that
speaker (“Speaker Setup” → “Config”).
7, 49
The volume of that speaker is set
to the minimum in “Speaker
Setup” in the Setup menu.
Display “Speaker Setup” in the Setup menu
and adjust the volume (“Speaker Setup” →
“Level”).
51
(If hardly any sound comes from
one channel)
Speaker output balance is not set
correctly.
Balance the volume of each speaker from
“Level” in the Setup menu (“Speaker Setup”
→ “Level”).
51
Sound may not be output from
certain channels, depending on the
input source or sound field
program.
Try another sound field program.
29
When a monaural source sound
field program is applied, for some
surround decoders, sound from all
channels is output from the center
speaker.
Try another sound field program.
29
En
7
71
APPENDIX
Troubleshooting
Problem
No sound is heard
from the surround
speakers.
No sound is heard
from the surround
back speakers.
No sound is heard
from the subwoofer.
Cause
Remedy
See
page
This unit is in straight decoding
mode and a monaural source is
being played back.
Press STRAIGHT to exit straight decoding
mode.
30
Sound may not be output from
certain channels depending on
input sources or sound field
programs.
Try another sound field program.
29
An external amplifier is not
connected to the external
SURROUND BACK jacks.
Connect an external amplifier to the
SURROUND BACK jacks and then connect
surround back speakers.
An external amplifier or surround
back speakers are not connected
correctly to the external
SURROUND BACK jacks.
Check if the connection is correct.
An external amplifier for surround
back speakers is not set correctly.
• The power is off.
• An input source that is
connected from the
SURROUND BACK jacks is not
selected.
• The volume is too low.
Set the external amplifier correctly.
“EXTD Surround” in the Option
menu is set to “Off,” or an input
signal does not contain a surround
back flag with “EXTD Surround”
set to “Auto.”
Set “EXTD Surround” other than “Off” or
“Auto.”
45
A subwoofer is not connected, or it
is inactive.
Check that a subwoofer is connected
correctly, and from the Setup menu
“Subwoofer” (“Speaker Setup” → “Config”
→ “Subwoofer”), set the subwoofer to
“On.”
49
Turn the subwoofer power on.
If the subwoofer includes an Auto Power
Off function, then lower the Auto Power Off
sensitivity settings.
—
The subwoofer is turned off.
The source does not contain LFE
(☞p. 77) or low frequency signals.
11
—
—
Problem
Cause
See
page
Remedy
The right
combination of audio
/ video jacks to
connect cannot be
found.
Combine input connected to the
external component video output
with another input audio jack.
Display the Input Audio menu for the
connected video output, select “Audio In,”
and select the jack to use for audio input.
46
The audio input
sources cannot be
played in the desired
digital audio signal
format.
The connected component is not
set to output the desired digital
audio signals.
Set the playback component properly
referring to its instruction manual.
—
There is noise
interference from
digital or radio
frequency
equipment.
This unit is too close to other
digital or radio frequency
equipment.
Move this unit further away from such
equipment.
—
Noise/hum noise is
heard.
Incorrect cable connection.
Connect the audio cables properly.
If the problem persists, the cables may be
defective.
—
A DTS-CD is being played back.
1) When only noise is output
If a DTS bitstream signal is not properly
input to this unit, only noise is output.
Connect the playback component to this
unit by digital connection and playback the
DTS-CD. If the condition is not improved,
the problem may results from the playback
component. Consult the manufacturer of the
playback component.
2) When noise is output during playback or
skip operation
Before playing back the DTS-CD, display
the Option menu after selecting the input
source and set ‘‘Decoder Mode’’ to ‘‘DTS.’’
—
The component connected to the
output jacks of this unit is not
turned on.
When the component connected to the
output jacks of this unit is not turned on, the
sound may be distorted, or the volume may
decreased due to the nature of AV receivers.
Turn on all components connected to this
unit.
—
“Max Volume” is set to a low
value.
Set it to a higher value.
54
The volume cannot
be increased, or the
sound is distorted.
En
72
APPENDIX
Troubleshooting
HDMI™
Problem
Tuner (FM/AM)
Cause
Remedy
See
page
FM
Problem
The front panel
display HDMI
indicator is flashing.
No picture or sound.
(When using HDMI
Control function)
TV sound is not
output from this unit
when operating the
remote control of the
TV.
An error with the HDMI
connection has occurred.
Try re-inserting the HDMI cable.
—
Confirm that HDMI video that is not
supported by the unit is not being input
(HDMI Input → Option menu → “Signal
Info”).
46
The number of components is over
the limit.
Disconnect some of the HDMI components.
—
The connected HDMI component
does not support high-bandwidth
digital copyright protection
(HDCP).
Connect an HDMI component that supports
HDCP.
—
The TV audio output is not
connected to this unit, or the
setting to match operations carried
out on TV is not set.
Connect the TV audio output to this unit,
and then select the connected input source
in “TVAudio” (Setup menu → HDMI Setup
→ TVAudio).
55
(When using Audio Return
Channel function)
The Audio Return Channel
function is not working.
Make sure that your TV supports Audio
Return Channel.
Set the Audio Return Channel function to
on (Setup menu → HDMI Setup →
ReturnChan).
55
FM stereo reception
is noisy.
Cause
You are too far from the station
transmitter, or the input from the
antenna is weak.
See
page
Remedy
Check the antenna connections.
22
Switch to monaural mode.
35
Replace the outdoor antenna with a more
sensitive multi-element antenna.
—
There is distortion,
and clear reception
cannot be obtained
even with a good FM
antenna.
There is multi-path interference.
Adjust the antenna height or orientation, or
place it in a different location.
—
The desired station
cannot be tuned into
with the automatic
tuning method.
You are in an area far from a
station, or input from the antenna
is weak.
Replace the outdoor antenna with a more
sensitive multi element antenna.
—
Use TUNING H / I to manually select the
station.
34
“No Presets” is
displayed.
No preset stations are registered.
Register stations you want to listen to as
preset stations before operation.
35
“Wrong Station” is
displayed.
An invalid FM/AM frequency has
been input.
Input a frequency that can be received.
—
En
73
APPENDIX
Troubleshooting
iPod™/iPhone™
AM
Cause
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak, or the antenna
connections are loose.
Adjust the AM loop antenna orientation.
22
Use the manual tuning method.
34
Automatic station
preset does not
work.
Automatic station preset is not
available for AM stations.
Use manual station preset.
34
Continuous
crackling and
hissing noises are
heard.
The supplied AM loop antenna is
not connected.
Connect the AM loop antenna correctly
even if you use an outdoor antenna.
22
The noises may be caused by
lightning, fluorescent lamps,
motors, thermostats, or other
electrical equipment.
It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
22
A TV set is being used nearby.
Move this unit away from the TV set.
—
Buzzing and whining
noises are heard.
Remedy
See
page
Problem
Display
Loading...
Connect error
Cause
See
page
Remedy
The unit is in the process of
recognizing the connection with
your iPod/iPhone.
—
The unit is in the middle of
acquiring song lists from your
iPod/iPhone.
—
There is a problem with the signal
path from your iPod/iPhone to the
unit.
Turn off the unit and reconnect the Yamaha
iPod universal dock to the DOCK jack of
the unit.
39
Remove your iPod/iPhone from the Yamaha
iPod universal dock and then place it back in
the dock.
39
Connect an iPod/iPhone supported by the
unit.
—
Unknown iPod
The iPod/iPhone being used is not
supported by the unit.
iPod connected
Your iPod/iPhone is properly
placed in the Yamaha iPod
universal dock.
—
Disconnected
Your iPod/iPhone is removed from
the Yamaha iPod universal dock.
—
Unable to play
The unit cannot playback the
songs currently stored on your
iPod/iPhone.
Check that songs are currently stored on
your iPod/iPhone.
En
—
74
APPENDIX
Troubleshooting
Bluetooth™
Display
Searching...
Remote control
Cause
Remedy
See
page
The Yamaha Bluetooth wireless
audio receiver and the Bluetooth
component are in the process of
pairing.
—
The Yamaha Bluetooth wireless
audio receiver and the Bluetooth
component are in the process of
establishing a connection.
—
Completed
The pairing is completed.
—
Canceled
The pairing is canceled.
—
BT connected
The connection between the
Yamaha Bluetooth wireless audio
receiver and the Bluetooth
component is established.
—
The Bluetooth component is
disconnected from the Yamaha
Bluetooth wireless audio receiver.
—
Disconnected
Not found
The Bluetooth component is not
found.
During pairing:
– pairing must be performed on the
Bluetooth component and this unit
simultaneously. Check if the Bluetooth
component is in pairing mode.
During connecting:
– check if the Bluetooth component is
turned on.
– check if the Bluetooth component is
within 10 m (32 feet) of the Yamaha
Bluetooth wireless audio receiver.
Problem
The remote control
does not work or
function properly.
External components
cannot be controlled
using the remote
control.
Cause
See
page
Remedy
Wrong distance or angle.
The remote control will function within a
maximum range of 6 m / 20 ft, and no more
than 30 degrees off-axis from the front
panel.
—
Direct sunlight or lighting (from
an inverter type of fluorescent
lamp, strobe light, etc.) is striking
the remote control sensor of this
unit.
Adjust the lighting angle, or reposition this
unit.
—
The batteries are weak.
Replace all batteries.
4
The remote control ID of the
remote control and this unit do not
match.
Match the remote control ID of this unit and
the remote control.
66
The remote control code is not
correctly set.
Set the remote control code correctly using
“Remote control code search” on the CDROM.
—
Try setting another code for the same
manufacturer using “Remote control code
search” on the CD-ROM.
—
If this unit does not work when you press
Cursor B / C / D / E, do the following.
When the key does not work during DVD
disc menu operation: press the Input
selector again.
When the key does not work during Option
menu/Setup menu operation: press the key
corresponding to the current menu operation
again.
—
—
Even if the remote control code is
correctly set, there are some
models that do not respond to the
remote control.
—
En
75
APPENDIX
Glossary
Audio information
Audio and video synchronization (lip sync)
Lip sync, an abbreviation for lip synchronization, is a technical term that
involves both a problem, and the capability of maintaining audio and video
signals synchronized during post-production and transmission.
Whereas the audio and video latency requires complex end-user
adjustment, HDMI version 1.3 incorporates an automatic audio and video
syncing capability that allows devices to perform this synchronization
automatically and accurately without user interaction.
Bi-amplification connection
A bi-amplification connection uses two amplifiers for a speaker. One
amplifier is connected to the woofer section of a loudspeaker while the
other is connected to the combined mid and tweeter section. With this
arrangement each amplifier operates over a restricted frequency range. This
restricted range presents each amplifier with a much simpler job and each
amplifier is less likely to influence the sound in some way.
Dolby Digital
Dolby Digital is a digital surround sound system that gives you completely
independent multi-channel audio. With 3 front channels (front L/R and
center), and 2 surround stereo channels, Dolby Digital provides 5 full-range
audio channels. With an additional channel especially for bass effects,
referred to as LFE (Low-Frequency Effect), the system has a total of 5.1channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the
surround speakers, more accurate moving sound effects and surround sound
environments are possible than with Dolby Surround. The wide dynamic
range from maximum to minimum volumes that are reproduced by the 5
full-range channels, and the precise sound orientation generated using
digital sound processing provides listeners with unprecedented excitement
and realism. With this unit, any sound environment from monaural up to a
5.1-channel configuration can be freely selected for your enjoyment.
Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to decode vast numbers
of existing Dolby Surround sources. This new technology enables a discrete
5-channel playback with 2 front left and right channels, 1 center channel,
and 2 surround left and right channels, instead of only 1 surround channel
for conventional Pro Logic technology. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and
“Game mode” for game sources.
Dolby Pro Logic IIx
DTS Digital Surround
Dolby Pro Logic IIx is a new technology enabling discrete multichannel
playback from 2-channel or multi-channel sources. There are three modes
available: “Music mode” for music sources, “Movie mode” for movie
sources (for 2-channel sources only) and “Game mode” for game sources.
DTS Digital Surround was developed to replace the analog soundtracks of
movies with a 5.1-channel digital sound track, and is now rapidly gaining
popularity in movie theaters around the world. DTS, Inc. has developed a
home theater system so that you can enjoy the depth of sound and natural
spatial representation of DTS Digital Surround in your home. This system
produces practically distortion-free 5.1-channel sound (technically, left,
right and center channels, 2 surround channels, plus an LFE 0.1 channel as
a subwoofer, for a total of 5.1-channels).
Dolby Surround
Dolby Surround uses a 4-channel analog recording system to reproduce
realistic and dynamic sound effects: 2 front left and right channels (stereo),
a center channel for dialog (monaural), and a surround channel for special
sound effects (monaural). The surround channel reproduces sound within a
narrow frequency range. Dolby Surround is widely used with nearly all
video tapes and laser discs, as well as in many TV and cable broadcasts.
The Dolby Pro Logic decoder built into this unit employs a digital signal
processing system that automatically stabilizes the volume on each channel
to enhance moving sound effects and directionality.
DTS Express
This is an audio format for next-generation optical discs such as Blu-ray
discs. It uses optimized low bit rate signals for network streaming. In the
case of a Blu-ray disc, this format is used with secondary audio, enabling
you to enjoy the commentary of the movie producer via the Internet while
playing the main program.
Dolby TrueHD
DTS-HD High Resolution Audio
Dolby TrueHD is an advanced lossless audio technology developed for
high-definition disc-based media including Blu-ray Disc. Selected as an
optional audio standard for Blu-ray Disc, this technology delivers sound
that is bit-for-bit identical to the studio master, offering a high-definition
home theater experience. Supporting bitrates up to 18.0 Mbps, Dolby
TrueHD can carry up to 8 discrete channels of 24-bit/96 kHz audio
simultaneously. Dolby TrueHD also remains fully compatible with the
existing multichannel audio systems and retains the metadata capability of
Dolby Digital, allowing dialog normalization and dynamic range control.
DTS-HD High Resolution Audio is a high resolution audio technology
developed for high-definition disc-based media including Blu-ray Disc.
Selected as an optional audio standard for Blu-ray Disc, this technology
delivers sound that is virtually indistinguishable from the original, offering
a high-definition home theater experience.
Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High
Resolution Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz
audio simultaneously.
DTS-HD High Resolution Audio also remains fully compatible with the
existing multichannel audio systems that incorporate DTS Digital
Surround.
DTS 96/24
DTS 96/24 offers an unprecedented level of audio quality for multichannel
sound on DVD video, and is fully backward-compatible with all DTS
decoders. “96” refers to a 96 kHz sampling rate compared to the typical
48 kHz sampling rate. “24” refers to 24-bit word length. DTS 96/24 offers
sound quality transparent to the original 96/24 master, and 96/24 5.1channel sound with full-quality full-motion video for music programs and
motion picture soundtracks on DVD video.
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio technology developed
for high-definition disc-based media including Blu-ray Disc. Selected as an
optional audio standard for Blu-ray Disc, this technology delivers sound
that is bit-for-bit identical to the studio master, offering a high-definition
home theater experience.
Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD Master
Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio
simultaneously. Supported by HDMI version 1.3 and designed for the
optical disc players and AV receivers/amplifiers of the future, DTS-HD
Master Audio also remains fully compatible with the existing multichannel
audio systems that incorporate DTS Digital Surround.
En
76
APPENDIX
Glossary
DSD
Direct Stream Digital (DSD) technology stores audio signals on digital
storage media, such as Super Audio CDs. Using DSD, signals are stored as
single bit values at a high-frequency sampling rate of 2.8224 MHz, while
noise shaping and oversampling are used to reduce distortion, a common
occurrence with very high quantization of audio signals. Due to the high
sampling rate, better audio quality can be achieved than that offered by the
PCM format used for normal audio CDs. The frequency is equal to or
higher than 100 kHz, with a dynamic range of 120 dB. This unit can
transmit or receive DSD signals via the HDMI jack.
LFE 0.1 channel
This channel reproduces low-frequency bass signals, and has a frequency
range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only
enforces a low-frequency range compared to the full-range reproduced by
the other 5-channels in Dolby Digital or DTS 5.1-channel systems.
Neo:6
Neo:6 decodes the conventional 2-channel sources for 6-channel playback
by the specific decoder. It enables playback with the full-range channels
with higher separation just like digital discrete signal playback. There are
two modes available: “Music mode” for music sources and “Cinema mode”
for movie sources.
PCM (Linear PCM)
Linear PCM is a signal format under which an analog audio signal is
digitized, recorded and transmitted without using any compression. This is
used as a method of recording CDs and DVD audio. The PCM system uses
a technique for sampling the size of the analog signal per very small unit of
time. Standing for “Pulse Code Modulation,” the analog signal is encoded
as pulses and then modulated for recording.
Sampling frequency and number of quantized bits
When digitizing an analog audio signal, the number of times the signal is
sampled per second is called the sampling frequency, while the degree of
accuracy when converting the sound level into a numeric value is called the
number of quantized bits. The range of rates that can be played back is
determined based on the sampling rate, whereas the dynamic range
representing the sound level difference is determined by the number of
quantized bits. In principle, the higher the sampling frequency, the wider
the range of frequencies that can be played back, and the higher the number
of quantized bits, the more accurately the sound level can be reproduced.
Sound field program information
CINEMA DSP
Since the Dolby Surround and DTS systems were originally designed for
use in movie theaters, their effect is best felt in a theater having many
speakers designed for acoustic effects. Since home conditions, such as
room size, wall material, number of speakers, and so on, can differ so
widely, it is inevitable that there are differences in the sound that is heard.
Based on a wealth of actually measured data, Yamaha CINEMA DSP uses
Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby
Digital, and DTS systems to provide the audiovisual experience of a movie
theater in the listening room of your own home.
Compressed music enhancer
The Compressed music enhancer feature of this unit enhances your
listening experience by regenerating the missing harmonics in compression
artifacts. As a result, it compensates for flattened complexity due to the loss
of high-frequency fidelity as well as lack of bass due to the loss of lowfrequency bass, providing improved performance for the overall sound
system.
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for
headphones. Parameters for headphones have been set for each sound field
program, so that accurate representations of all the sound field programs
can be enjoyed on headphones.
Virtual CINEMA DSP
Yamaha has developed a Virtual CINEMA DSP algorithm that allows you
to enjoy DSP surround effects even without any surround speakers, by
using virtual surround speakers. It is even possible to enjoy Virtual
CINEMA DSP using a minimal two-speaker system that does not include a
center speaker.
Video information
Component video signal
Composite video signal
With the composite video signal system, the video signal comprises the
three basic elements of a video picture: color, brightness and
synchronization data. A composite video jack on a video component
transmits these three elements combined.
Deep Color
Deep Color refers to the use of various color depths in displays, up from the
24-bit depths in previous versions of the HDMI specification. This extra bit
depth allows HDTVs and other displays increase from millions of colors to
billions of colors and eliminate on-screen color banding for smooth tonal
transitions and subtle gradations between colors. The increased contrast
ratio can represent many times more shades of gray between black and
white. Additionally, Deep Color increases the number of available colors
within the boundaries defined by the RGB or YCbCr color space.
HDMI
HDMI (High-Definition Multimedia Interface) is the first industry
supported, uncompressed, all-digital audio/video interface. Providing an
interface between any sources (such as set-top boxes or AV receivers) and
audio/video monitors (such as digital televisions), HDMI supports
standard, enhanced or high-definition video as well as multichannel digital
audio using a single cable. HDMI transmits all ATSC HDTV standards and
supports 8-channel digital audio, with bandwidth to spare to accommodate
future enhancements and requirements.
When used in combination with HDCP (High-bandwidth Digital Content
Protection), HDMI provides a secure audio/video interface that meets the
security requirements of content providers and system operators. For
further information on HDMI, visit the HDMI website at “http://
www.hdmi.org/.”
“x.v.Color”
A color space standard supported by HDMI version 1.3. It is a more
extensive color space than sRGB, and allows the expression of colors that
were not hitherto possible. While remaining compatible with the color
gamut of sRGB standards, “x.v.Color” expands the color space, and can
thus produce more vivid, natural images. It is particularly effective for still
pictures and computer graphics.
With the component video signal system, the video signal is separated into
the Y signal for luminance and the PB and PR signals for chrominance.
Color can be reproduced more faithfully with this system because each of
these signals is independent. The component signal is also called the “color
difference signal” because the luminance signal is subtracted from the color
signal. A monitor with component input jacks is required in order to output
component signals.
En
77
APPENDIX
Information on HDMI™
■ HDMI signal compatibility
NOTES
Audio signals
Audio signal types
Audio signal formats
Compatible media
2ch Linear PCM
2ch, 32-192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio, etc.
Multi-ch Linear PCM
8ch, 32-192 kHz, 16/20/24 bit
DVD-Audio, Blu-ray Disc, HD DVD,
etc.
DSD
2/5.1ch, 2.8224 MHz, 1 bit
SACD, etc.
Bitstream
Dolby Digital, DTS
DVD-Video, etc.
Bitstream (High definition audio)
Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio, DTS-HD
High Resolution Audio, DTS Express
Blu-ray Disc, HD DVD, etc.
• If the input source component can decode the bitstream audio signals of audio commentaries, you can playback the audio
sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.
• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,
depending on the type of the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI components.
• Refer to the supplied instruction manuals for details.
To decode audio bitstream signals on this unit, set the input source component appropriately so that the
component outputs the bitstream audio signals directly (does not decode the bitstream signals on the
component).
• This unit is not compatible with the audio commentary features (for example, the special audio contents
downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not playback the audio
commentaries of the Blu-ray Disc or HD DVD content.
Video signals
This unit is compatible with the video signals of the following resolutions:
–
–
–
–
480i/60 Hz
576i/50 Hz
480p/60 Hz
576p/50 Hz
– 720p/60 Hz, 50 Hz
– 1080i/60 Hz, 50 Hz
– 1080p/60 Hz, 50 Hz, 24 Hz
About trademarks
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a
license agreement.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent No’s:
5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 & other U.S. and worldwide patents
issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD
Master Audio are trademark of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered
trademarks of HDMI Licensing LLC.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
iPod™, iPhone™
“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries. “iPhone” is a trademark
of Apple Inc.
En
78
APPENDIX
Specifications
■ Input jacks
■ HDMI
• Analog audio
Audio x 5 (AV5, AV6, AUDIO1, AUDIO2, V-AUX)
• HDMI Specification: Deep Color, “x.v.Color,” Auto Lips Sync,
ARC (Audio Return Channel)
• Digital audio
Optical x 2 (AV1, AV4)
Coaxial x 2 (AV2, AV3)
• Video Format (Repeater Mode)
- VGA
- 480i/60 Hz
- 576i/50 Hz
- 480p/60 Hz
- 576p/50 Hz
- 720p/60 Hz, 50 Hz
- 1080i/60 Hz, 50 Hz
- 1080p/60 Hz, 50 Hz, 24 Hz
• Video
Composite x 5 (AV3, AV4, AV5, AV6, V-AUX)
Component x 2 (AV1, AV2)
• Other
HDMI x 4
DOCK x 1 (AUDIO, VIDEO [Composite])
■ Output jacks
• Analog Audio
Speaker out x 5ch (FRONT L/R, CENTER,
SURROUND L/R)
PRE OUT x 2 (SURROUND BACK L/R)
Subwoofer out x 1
AV OUT x 1
AUDIO OUT x 1
• Video
MONITOR OUT
- Component x 1
- Composite x 1
AV OUT
- Composite x 1
• Other
HDMI OUT x 1
• Audio Format
- Dolby Digital
- DTS
- DSD 6ch
- Dolby Digital Plus
- Dolby TrueHD
- DTS-HD
- PCM 2ch-8ch (Max 192 kHz/24 bit)
• Content Protection: HDCP compatible
■ Compatible Decoding Formats
• Decoding Format
- Dolby True HD, Dolby Digital Plus
- DTS-HD Master Audio, DTS-HD High Resolution, DTS Express
- Dolby Digital, Dolby Digital EX
- DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
• Post Decoding Format
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
Dolby Pro Logic II Game
- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie,
Dolby Pro Logic IIx Game
- DTS Neo:6 Music, DTS Neo:6 Cinema
■ AUDIO SECTION
• Minimum RMS Output Power for Front, Center, Surround
[U.S.A. and Canada models]
(1 kHz, 0.9% THD, 8 Ω)
FRONT L/R ....................................................................... 105 W/ch
CENTER................................................................................. 105 W
SURROUND L/R .............................................................. 105 W/ch
[Other models]
(1 kHz, 0.9% THD, 6 Ω)
FRONT L/R ....................................................................... 105 W/ch
CENTER................................................................................. 105 W
SURROUND L/R .............................................................. 105 W/ch
• Dynamic Power (IHF)
[U.S.A. and Canada models]
Front Speakers 8/6/4/2 Ω...................................110/130/160/180 W
[Other models]
Front Speakers 6/4/2 Ω .............................................110/130/150 W
• Maximum Useful Output Power (JEITA)
[China, Korea, General and Asia models]
1 kHz, 10% THD, 6 Ω ............................................................ 140 W
• Maximum Output Power [U.K., Europe and Asia models]
1 kHz, 0.7% THD, 4 Ω ........................................................... 120 W
• IEC Output Power [U.K., Europe and Asia models]
Front Speakers 1 kHz, 0.9% THD, 8 Ω ..................... 105 W+105 W
• Dynamic Headroom [U.S.A. and Canada models]
8 Ω .......................................................................................... 0.2 dB
En
79
APPENDIX
Specifications
■ VIDEO SECTION
■ GENERAL
• Maximum Input Voltage
AV5, etc. (1 kHz, 0.5% THD) .................................... 2.3 V or more
• Video Signal Type
[U.S.A., Canada, Korea and General models] ........................ NTSC
[Other models] ........................................................................... PAL
• Rated Output Voltage/Output Impedance
AUDIO OUT ............................................................200 mV/1.2 kΩ
SUBWOOFER (2ch Stereo & Front: Small)................1.0 V/1.2 kΩ
• Signal Level
Composite ..................................................................... 1 Vp-p/75 Ω
Component ...................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)
• Headphone Jack Rated Output/Impedance
AV5, etc. (1 kHz, 50 mV, 8 Ω) ..................................100 mV/470 Ω
• Maximum Input Level ..............................................1.5 Vp-p or more
• Power Supply
[U.S.A. and Canada models] ................................. AC 120 V, 60 Hz
[General models] ................. AC 110/120/220/230-240 V, 50/60 Hz
[China model] ........................................................ AC 220 V, 50 Hz
[Korea model] ........................................................ AC 220 V, 60 Hz
[Australia model] ................................................... AC 240 V, 50 Hz
[U.K. and Europe models] ..................................... AC 230 V, 50 Hz
[Asia models]......................................AC 220/230-240 V, 50/60 Hz
• Input Sensitivity/Input Impedance
AV5, etc .....................................................................200 mV/47 kΩ
• Frequency Response
AV5 to FRONT..................................... 10 Hz to 100 kHz, +0/-3 dB
• Total Harmonic Distortion
AV5, etc. to FRONT (DIRECT)
[U.S.A. and Canada models] (1 kHz, 50 W, 8 Ω) ....... 0.06% or less
[Other models] (1 kHz, 50 W, 6 Ω) ............................. 0.06% or less
• Signal to Noise Ratio .................................................... 50 dB or more
• Frequency Response [MONITOR OUT]
Component .................................................. 5 Hz to 60 MHz, ±3 dB
■ FM SECTION
• Signal to Noise Ratio (IHF-A Network)
AV5, etc. (DIRECT) Input Shorted (250 mV to Front Speakers)
...............................................................................100 dB or more
• Tuning Range
[U.S.A. and Canada models]............................... 87.5 to 107.9 MHz
[Asia and General models]............87.5/87.50 to 108.0/108.00 MHz
[Other models] ................................................ 87.50 to 108.00 MHz
• Residual Noise (IHF-A Network)
Front Speakers ............................................................150 µV or less
• 50 dB Quieting Sensitivity (IHF)
Mono .....................................................................3.0 µV (20.8 dBf)
• Channel Separation (1 kHz/10 kHz)
AV5, etc. (5.1 kΩ shortened) ........................... 60 dB/45 dB or more
• Signal to Noise Ratio (IHF)
Mono/Stereo..................................................................74 dB/69 dB
• Volume Control ...................................... MUTE / -80 dB to +16.5 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo........................................................................0.3/0.3%
• Tone Control (Front Speakers)
BASS Boost/Cut .............................................±10 dB/2 dB at 50 Hz
BASS Turnover Frequency .................................................... 350 Hz
TREBLE Boost/Cut......................................±10 dB/2 dB at 20 kHz
TREBLE Turnover Frequency.............................................. 3.5 kHz
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround Back)............. 12 dB/oct.
L.P.F. (Subwoofer)............................................................ 24 dB/oct.
• Power Consumption
[U.S.A. and Canada models] .....................................270 W/320 VA
[Other models] ........................................................................ 280 W
• Standby Power Consumption
HDMI Control off / Standby Through off ....................0.2 W or less
HDMI Control on / Standby Through off .....................1.2 W or less
HDMI Control on/ Standby Through on..........................3 W or less
• Dimensions (W x H x D)
435 x 151 x 364 mm (17-1/8 x 6 x 14-3/8 in)
• Weight
8.4 kg (18.5 lbs)
* Specifications are subject to change without notice.
• Antenna Input (unbalanced)......................................................... 75 Ω
■ AM SECTION
• Tuning Range
[U.S.A. and Canada models]...................................530 to 1710 kHz
[Asia and General models]..................... 530/531 to 1710/1611 kHz
[Other models] ........................................................531 to 1611 kHz
En
80
APPENDIX
Index
Numerics
D
5.1-channel speaker layout........................................................... 10
6.1-channel speaker layout........................................................... 10
7.1-channel speaker layout........................................................... 10
D.Range, Sound Setup ................................................................
Decoder Mode, Option menu......................................................
Dimmer, Func. Setup ..................................................................
Direct mode.................................................................................
Disconnect, Option menu............................................................
Distance, Speaker Setup..............................................................
DSP Parameter ............................................................................
DVD player connection...............................................................
A
Adaptive DRC, Sound Setup ....................................................... 53
Advanced Setup menu ................................................................. 65
AM antenna connection ............................................................... 22
AM tuning.................................................................................... 34
Audio In, Option menu ................................................................ 46
AUDIO jack ................................................................................. 14
Audio Return Channel function ................................................... 69
Audio, HDMI Setup..................................................................... 56
Auto Preset................................................................................... 35
Auto Preset, Option menu............................................................ 47
Automatic traffic information reception ...................................... 38
AutoPowerDown, Func. Setup .................................................... 58
B
BD player connection .................................................................. 17
Bluetooth™ component playback................................................ 42
J
54
45
58
31
47
51
59
17
L
Level, Speaker Setup................................................................... 51
Lipsync, Sound Setup.................................................................. 53
Low-frequency sound adjustment ............................................... 28
M
Equalizer, Speaker Setup ............................................................ 51
EXTD Surround, Option menu ................................................... 45
External component connection.................................................. 14
Manual Preset .............................................................................. 36
Max Volume, Sound Setup ......................................................... 54
Memory Guard ............................................................................ 58
Multi information display.............................................................. 7
MUTE indicator ............................................................................ 7
F
N
FM antenna connection ............................................................... 22
FM Mode, Option menu.............................................................. 47
FM tuning.................................................................................... 34
Front panel .................................................................................... 5
Front panel display........................................................................ 7
Front speaker ................................................................................. 9
Func. Setup.................................................................................. 57
Normal tuning.............................................................................. 34
H
Pairing, Option menu .................................................................. 47
PHONES jack................................................................................ 5
Portable audio player connection ................................................ 21
PORTABLE jack......................................................................... 14
Preset tuning ................................................................................ 35
E
C
Cable plug .................................................................................... 14
Center speaker................................................................................ 9
Changing speaker impedance ...................................................... 12
CINEMA DSP indicator ................................................................ 7
Clear Preset, Option menu ........................................................... 47
COAXIAL jack ............................................................................ 14
COMPONENT VIDEO jack........................................................ 14
Config, Speaker Setup ................................................................. 49
Connect, Option menu ................................................................. 47
Connecting speakers .................................................................... 11
Connections.................................................................................... 9
Control, HDMI Setup................................................................... 55
Cursor indicators ............................................................................ 7
Jack.............................................................................................. 14
HDMI Control function............................................................... 67
HDMI indicator............................................................................. 7
HDMI jack .................................................................................. 14
HDMI Setup ................................................................................ 54
High-frequency sound adjustment .............................................. 28
I
Init Volume, Sound Setup ...........................................................
INIT, Advanced Setup menu.......................................................
Input Rename, Func. Setup .........................................................
iPhone™ playback ......................................................................
iPod™ playback ..........................................................................
54
66
57
39
39
O
OPTICAL jack ............................................................................ 14
Option menu ................................................................................ 44
P
R
Radio Data System tuning........................................................... 37
Rear panel...................................................................................... 6
Remote control .............................................................................. 8
Remote control battery installation ............................................... 4
Remote control, Controlling other components .......................... 62
REMOTE ID, Advanced Setup menu ......................................... 66
Repeat playback, iPod/iPhone..................................................... 41
En
81
APPENDIX
Index
Repeat, Option menu ................................................................... 47
ReturnChan, HDMI Setup ........................................................... 55
S
SCENE function........................................................................... 29
Setup menu................................................................................... 48
Shuffle playback, iPod/iPhone..................................................... 41
Shuffle, Option menu................................................................... 47
Signal Info, Option menu............................................................. 46
Sound field program .................................................................... 29
Sound field program parameter setting........................................ 59
Sound Setup ................................................................................. 53
SP IMP., Advanced Setup menu.................................................. 65
Speaker connection ........................................................................ 9
Speaker indicators.......................................................................... 7
Speaker layout.............................................................................. 10
Speaker setting ............................................................................. 23
Speaker Setup............................................................................... 49
Standby Charge, Option menu..................................................... 47
Standby, HDMI Setup.................................................................. 55
Straight decoding mode ............................................................... 30
Subwoofer ...................................................................................... 9
Supplied accessories ...................................................................... 4
Surround back speaker ................................................................... 9
Surround back speaker connection .............................................. 11
Surround speaker ........................................................................... 9
VOLTAGE SELECTOR............................................................... 6
VOLUME...................................................................................... 5
VOLUME indicator ...................................................................... 7
Volume Trim, Option menu........................................................ 45
Y
YPAO.......................................................................................... 23
T
Test Tone, Speaker Setup ............................................................ 52
Tone control ................................................................................. 28
TrafficProgram, Option menu...................................................... 47
TU, Advanced Setup menu .......................................................... 66
Tuner indicator............................................................................... 7
TV monitor connection ................................................................ 15
TVAudio, HDMI Setup ............................................................... 55
V
VIDEO AUX input cover .............................................................. 4
Video cameras connection ........................................................... 21
VIDEO jack ................................................................................. 14
En
82
© 2010 Yamaha Corporation All rights reserved.
YC504A0/OMEN
English
Quick Reference Guide
■ Accessories
The following accessories are supplied with this product.
PUSH
Remote control
Batteries (2) (AAA, R03, UM-4)
AM loop antenna
Indoor FM antenna
VIDEO AUX input cover
YPAO microphone
Preparing the remote control
1
2
3
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
Be sure to aim the remote control directly at the
remote control sensor on this unit during operation.
within 6 m
(20 ft)
■ Items necessary for connection
Speakers
Ex.
Front speaker
Ex.
Ex.
Ex.
Center speaker
Surround speaker
Active subwoofer
• Use speakers with an impedance of at least 6 Ω.
• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
• Prepare at least two speakers (for front). The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker
Cable
External components
• Cables for connecting external components
(may differ depending on the components you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
TV
Playback device such as BD
(Blu-ray Disc)/DVD players
-1-
Some features are not available in certain regions.
Connect and install as follows the first time you use this unit.
See the following explanations for the connections for each number.
TV
3
2
BD/DVD player
(recorder)
4
This unit
Front
speaker R
Front
speaker L
Subwoofer
1
Surround
speaker R
Center speaker
1
Surround
speaker L
1 Connect the speakers
2 Connect a TV
3 Connect playback device such as BD/DVD players and recorders
4 Set the VOLTAGE SELECTOR and connect the AC power cable
(Asia and General models)
Connect the AC power cable
(Other models)
When connection and installation is finished, set up the speaker parameters
automatically 5 .
-2-
1 Connect the speakers
Front speaker
R
L
Surround speaker
R
L
Caution:
• Remove the AC power cord of this unit from the power outlet
before connecting the speakers.
• Generally speaker cables consist of two parallel insulated
cables. One of these cables is a different color, or has a
line running along it, to indicate different polarity. Insert the
different colored (or lined) cable into the “+” (positive, red)
terminal on this unit and the speakers, and the other cable into
the “-” (minus, black) terminal.
• Be careful that the core of the speaker cable does not touch
anything or come into contact with the metal areas of this
unit. This may damage this unit or the speakers. If the speaker
cables short circuit, “CHECK SP WIRES!” will appear on the
front panel display when this unit is switched on.
• (U.S.A. and Canada models only) When connecting 6 Ω
speakers, set the speaker impedance to 6 Ω on this unit before
making connections. Refer to Owner’s Manual for information
on settings.
SPEAKERS
HDMI 3
HDMI 4
FRONT
CENTER
SURROUND
SINGLE
SURROUND BACK
AUDIO
OUT
SUBWOOFER
PRE OUT
Center speaker
Subwoofer
Connecting the speakers
2
Connecting the subwoofer
3
FR
ON
T
1
Connect the subwoofer input jack to the SUBWOOFER
jack on this unit with an audio pin cable.
2
Set the subwoofer volume as follows.
1
4
1
Remove approximately 10 mm of insulation from
the ends of the speaker cables, and twist the bare
wires of the cables together firmly so that they will
not cause short circuits.
2
Loosen the speaker terminals.
3
Insert the bare wire of the speaker cable into the
gap on the side of the terminal.
4
Tighten the terminal.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
VOLUME
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
MAX
Subwoofer examples
Connecting the banana plug
(Except U.K., Europe, Asia and Korea
models)
When using the 7.1/6.1-channel surround
system
Tighten the knob, and then insert the banana plug
into the end of the terminal.
Connecting an external amplifier to the SURROUND
BACK L/R jacks of the PRE OUT terminals allows you
to create the maximum of 7.1-channel surround system
with a surround back channel.
Refer to the Owner’s Manual for information on how to
connect the surround back speakers.
FR
ON
T
Banana plug
-3-
2 Connect a TV
Video input to this unit is output to a TV using output jacks of the
same kind.
Input
When you have made connections using different types of video
such as HDMI and component video, make the same connection
with your TV. When viewing, be sure to switch the input source on
your TV to match the playback device.
Output
HDMI
HDMI
COMPONENT
VIDEO
COMPONENT
VIDEO
VIDEO
VIDEO
HDMI input
Component
video input
Video input
If your TV has multiple inputs, connect with the following priority (A to C).
HDMI
HDMI
COMPONENT
VIDEO
PR
HDMI
PB
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
HDMI 2
VIDEO
HD
V
COMPONENT
VIDEO
COMPONENT
VIDEO
FM
A When using an HDMI
compatible TV.
Y
GND AM
PR
PR
PR
PR
PB
75ǡ
PB
COMPONENT
VIDEO
PR
PB
B When using a component
PB
VIDEO
VIDEO
PB
V
Y
Y
Y
V
Y
Y
MONITOR OUT
V
VIDEO
video input-compatible TV.
V
VIDEO
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
( TV )
A 1
AV
AV
A 2
AV
A 3
AV
A 4
AV
A 5
A
AV
OUT
AV 6
A
V
AUDIO 1
C When using a TV compatible
with video input only.
AUDIO 2
Listening to TV audio
To playback TV audio on this unit, connect the TV audio output to this
unit.
When using an HDMI compatible TV that supports Audio
Return Channel functions and / or HDMI Control functions (Ex.
Panasonic VIERA Link), you can enjoy the TV sound on this unit
as follows:
Connect the following input jacks, matching the audio output jacks on
your TV. When viewing your TV, select the appropriate input source on
this unit.
OPTICAL
When using a TV that supports the Audio Return
Channel functions and HDMI Control functions
The audio / video output from the unit to the TV and audio
output from the TV to the unit are possible using a single HDMI
cable.
The input source is switched automatically to match operations
carried out on the TV, and that makes TV sound control easier
to use.
For the connections and settings, refer to “Using the HDMI
Control function” in Owner’s Manual.
DOCK
O
COMPONENT
VIDEO
PR
Audio
output
PB
VIDEO
Y
O
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
( TV )
AV 1
AV 2
AV 3
AV 4
AV 5
When using a TV that supports HDMI Control functions
Audio output from TV
Input jack on this unit
Optical digital output
AV1 or AV4
Coaxial digital output
AV2 or AV3
Analog output
One of AV5, AV6, AUDIO1,
AUDIO2, and V-AUX
HDMI Audio Return Channel
(Described in the right column)
HDMI OUT
When HDMI Control functions are enabled on the unit, input
source can be switched automatically to match operations
carried out on the TV.
For the connections and settings, refer to “Using the HDMI
Control function” in Owner’s Manual.
✽ Connecting to AV4 allows you to playback TV audio just by pressing
the “TV” under “SCENE” key.
-4-
3 Connect playback device such as BD/DVD players and recorders
If your playback device has multiple audio/video outputs, connect with the following
priority (A to D) to enjoy a higher quality sounds and images.
A When playback device is
HDMI
HDMI
capable of HDMI output
HDMI
B When playback device is
capable of component video
output (with optical digital
audio output)
COMPONENT
VIDEO
PR
PB
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
Y
FM
OPTICAL
PR
PR
PR
PB
PB
PB
Y
Y
HDMI 2
GND AM
PR
O
75ǡ
PB
VIDEO
VIDEO
C When playback device is
capable of component video
output (with coaxial digital
audio output)
D When playback device is capable
of video output (with analog audio
output) only
•
•
•
•
HDMI 3
COMPONENT
VIDEO
COMPONENT
VIDEO
V
Y
Y
COMPONENT
VIDEO
MONITOR OUT
PR
L
PB
R
O
Y
COAXIAL
C
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
( TV )
AV 1
AV 2
A 3
AV
A 4
AV
AV 5
A 6
AV
A
AV
OUT
AUDIO 1
AUDIO 2
C
VIDEO
V
AUDIO
L
R
When playback, select the corresponding input source the jack is connected.
Connecting to HDMI1 allows you to select the HDMI input just by pressing the “BD/DVD” under “SCENE” key.
Connecting to AV3 allows you to select the AV3 input just by pressing the “CD” under “SCENE” key.
If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from
component video output jacks and audio from analog output jacks. Refer to Owner’s Manual for details.
Set the VOLTAGE SELECTOR and connect the AC power cable
4
(Asia and General models)
Connect the AC power cable
(Other models)
(Asia and General models only)
Select the switch position according to your local voltage
using a straight slot screwdriver.
(General model)
Voltages are AC 110/120/220/230-240 V, 50/60 Hz.
VOLTAGE SELECTOR
To the power
outlet
VOLTAGE
SELECTOR
(Asia model)
Voltages are AC 220/230-240 V, 50/60 Hz.
AC power cable
Caution
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local voltage BEFORE plugging the
power cable into the AC wall outlet. Improper setting of
the VOLTAGE SELECTOR may cause damage to this
unit and create a potential fire hazard.
-5-
5 Set up the speaker parameters automatically (YPAO)
When connection is finished, adjust the status, sizes, and volume balance of the
speakers to provide an optimal sound field. This unit is equipped with a YPAO
(Yamaha Parametric Room Acoustic Optimizer) function that adjusts the speaker
balance automatically with a simple procedure.
When you use YPAO, a test tone will be output from the speakers for approximately 3 minutes and acoustic measuring will be performed.
When using YPAO, be careful of the following.
• The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby.
• Please take care that the test tone does not frighten any small children.
1
Check the following before using YPAO.
This unit
• The headphones are removed.
Subwoofer
• The power is turned on.
• Volume is set to approximately half, and the cross-over frequency (if present) is set to maximum.
CROSSOVER/
HIGH CUT
VOLUME
MIN
MIN
MAX
MAX
Subwoofer examples
2
Place the supplied YPAO microphone at ear height in your listening position.
YPAO microphone
When positioning the microphone, we recommend that you use equipment that allows you to adjust the height (such as a tripod) as a
microphone stand. When using a tripod, use the tripod screws to fix the microphone in place.
3
Press RECEIVER A on the remote control to switch this unit on.
Continues to
the next page
-6-
4
Connect the YPAO microphone to the YPAO MIC jack on the front panel.
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
YPAO MIC
RECEIVER A
HDMI
1
2
3
4
1
2
3
4
5
6
1
2
V-AUX
V
VAUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
INFO
A
AV
AUDIO
YPAO microphone
TUNER
“MIC ON. YPAO START” appears on the front panel display, and then changes to display the following.
YPAO
AM
MEMORY
MOVIE
MUSIC
ENHANCER SUR. DECODE
STEREO
STRAIGHT
VOL.
SW
C
R
L
SL
SR
SBL
SBR
Press [SETUP]
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
This completes preparations. To achieve more accurate results, be careful of the following when
measuring.
• Measuring will take approximately 3 minutes. Keep the room as quiet as possible during
measurement.
• Wait in the corner of the listening room during measurement or leave it entirely, to avoid
becoming an obstruction between the speakers and the YPAO microphone.
5
FM
INFO
Press SETUP on the remote control to start measurement.
RADIO
SETUP
VOLUME
ENTER
OPTION
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
REC
1
2
3
5
6
7
9
0
10
4
8
ENT
TV
INPUT
Progress
YPAO
TV VOL
TV CH
MUTE
VOL.
Progress
SW
C
R
L
SL
SR
SBL
SBR
02%
The following display appears if measurement finishes without any problems.
YPAO
VOL.
YPAO Complete
L
SL
SW
C
R
SR
You can use the following functions with
this unit. For details on the operations, refer
to Owner's Manual on the supplied CD-ROM.
Note
When a problem occurs, an error message or a warning
message appears either during or after measurement. Refer
to “Set up the speaker parameters automatically (YPAO)” in
Owner’s Manual to solve the problem, and carry out YPAO again.
6
Press ENTER on the remote control to apply the results
of measurement.
YPAO
VOL.
Disconnect MIC
7
■ Various parameter adjustment to match your
listening environment
L
SL
SW
C
R
SR
- Sound quality control with the equalizer
<Graphic Equalizer>
- Easy listening at low volumes <Adaptive DRC>
- Adjusting volume between input sources
<Volume Trim>
■ External device connection and playback
- Connections and playback from BD/DVD players
(recorders), TV audio, and other devices
- Playback from an iPod/iPhone
- Playback from a Bluetooth device
Remove the YPAO microphone.
YPAO finishes automatically when the YPAO microphone is removed.
■ FM/AM tuner
- Simple preset tuning
- (U.K. and Europe models) Radio Data System tuning
- (U.K. and Europe models)
Automatic traffic information reception
- (Asia and General models only)
Changing FM/AM frequency steps initializing various
settings for this unit
YPAO MIC
INFO
etc.
-7-
Operation guide
②
①
③
⑥
YPAO MIC
④
DIRECT
INFO
MEMORY
PRESET
FM
AM
TUNING
VOLUME
SCENE
BD
DVD
PHONES
INPUT
TV
TONE CONTROL
CD
PROGRAM
RADIO
VIDEO AUX
STRAIGHT
SILENT CINEMA
PORTABLE
⑦
VIDEO
L
AUDIO
R
③
①
1 Switches this unit between on and standby mode
This unit switches between on and standby mode every time you press this key.
CODE SET
TRANSMIT
2 Choose an input source to listen to
SOURCE
RECEIVER
The name of the selected input source appears on the front panel display.
SLEEP
VOL.
HDMI1
HDMI
L
SL
SW
C
1
2
R
SR
3
4
3
4
AV
1
2
AUDIO
3 Select sound field programs and sound decoders
Front
panel
Remote
control
Description
1
2
[ B ]
DOCK
PRESET
TUNING
FM
AM
INFO
MEMORY
MOVIE
MUSIC
Selects sound field programs optimized for appreciating music.
MUSIC
PROGRAM
STEREO
SUR. DECODE
TV
CD
SETUP
Switches to direct mode for faithful reproduction of audio.
RETURN
⑥
The current volume level is displayed on the front panel display.
RADIO
VOLUME
④
MUTE
⑤
DISPLAY
POP-UP
MENU
TOP
MENU
4 Adjusts the volume level
③
OPTION
ENTER
DIRECT
DIRECT
SCENE
BD
DVD
Switches to straight decoding mode for stereo/multi-channel
playback without using a sound field program.
STRAIGHT
STEREO
STRAIGHT
Selects surround decoders such as Dolby Pro Logic II.
STRAIGHT
②
ENHANCER SUR. DECODE
Selects settings for stereo playback or enhancers for
compressed audio.
ENHANCER
DIRECT
6
[ A ]
TUNER
Selects sound field programs optimized for viewing movies,
dramas, and sports.
MOVIE
5
V-AUX
REC
VOL.
Volume -18.5dB
L
SL
SW
C
R
SR
5 Mutes the sound
1
2
3
4
5
6
7
8
9
0
The indicator blinks while the sound is muted.
10
ENT
TV
INPUT
TV VOL
6 Switches between input settings
TV CH
MUTE
You can switch input sources and sound field programs with a single key.
SCENE
BD/DVD
TV
CD
RADIO
Input
Sound field program
HDMI 1
AV4
AV3
TUNER
Straight
Straight
Straight
7ch Enhancer
- Pressing and holding this key allows you to store input sources/sound field programs.
- Press this key when this unit is in standby mode to switch on the unit.
7 Adjusting high/low-frequency sound (Tone control)
1
Press TONE CONTROL to select “Treble” or “Bass.”
TONE
Treble
2
VOL.
0.0dB
L
SL
SW
C
R
SR
Press PROGRAM l / h to adjust the output level in those
frequency ranges.
- You can set the tone control for speakers and headphones separately. Connect the
headphones when adjusting the headphone tone control.
- If you set an extreme tone balance, sounds may not match those from other channels.
©2010 Yamaha Corporation All rights reserved.
-8-
YC504A0/QREN
Download PDF
Similar pages