HP ProLiant BL460c Generation 6 Server Blade

QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Overview
HP ProLiant BL460c G6 Server Blade
1. Two (2) mezzanine I/O expansion slots
5. Two (2) small form factor (SFF) hot-plug drive bays
2. Internal USB connector
6. Local I/O Connector
3. Twelve (12) DDR3 Registered or Unbuffered DIMM
7. Internal SD card slot
Memory Slots
8. Up to two (2) Intel® Xeon® 5500 or 5600 series
processors
4. HP Smart Array P410i Controller
9. Access Panel
What's New
Support for HP 900GB 6G SAS 10K SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
At A Glance
This document covers the HP ProLiant BL460c G6 server blade only. For more information on HP BladeSystems c-Class
Enclosures and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP ProLiant BL460c G6 provides greater 2P x86 server blade density without compromise and maximum power-
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 1
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Overview
efficiency with flexibility and choice.
HP ProLiant BL460c G6 server blade includes:
Processor:
Up to two (2) Intel® Xeon® 5500 or 5600 Series processors, up to 2.93GHz
Intel® 5500 Chipset
Memory:
Twelve (12) DIMM slots
Up to 192GB, using PC3-8500 DDR3 Registered (RDIMM) memory, operating at 800MHz when fully
populated at 2 DIMMs per Channel in 12 slots
Up to 48GB, using PC3-10600 DDR3 Unbuffered (UDIMM) memory, operating at 1333MHz when fully
populated at 2 DIMMs per Channel in 12 slots
Storage Controller:
HP Smart Array P410i Controller (RAID 0/1)
Internal Drive Support:
Up to two (2) small form factor (SFF) SAS or SATA hot plug hard disk drives or SATA solid state drives
Network Controller:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module. Learn
more at: www.hp.com/go/virtualconnect.
NOTE: Each port is autosensing 1 Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components.
One (1) additional 10/100 server adapter dedicated to iLO 2 Management
Mezzanine Support:
Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards
Dual-Port FlexFabric Adapter mezzanine option
Dual-Port Fibre Channel Mezzanine options for SAN connectivity (Choice of Emulex, QLogic or
Brocade)
iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
Ethernet server adapter mezzanine options for additional network ports
4X QDR (40Gbps) and DDR (20Gbps) InfiniBand (IB) Mezzanine options for low latency and high
bandwidth server interconnectivity
I/O Accelerator mezzanine options for high transaction rate local storage
SAS mezzanine option for external direct attach and shared SAS storage
Ports:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
One (1) internal SD-HC Card slot
Security - Trusted Platform Module:
One (1) internal TPM 1.2 module connector
Form Factor:
HP ProLiant BL460c G6 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000
enclosures
Infrastructure Management:
This server blade requires the latest version of the Onboard Administrator firmware. This firmware release
may also require other subsystem firmware upgrades. For information on the latest firmware versions, please
see the Blades Firmware Maintenance website at:
http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
HP Integrated Lights-Out 2 (iLO 2) management processor for simplified server setup, health monitoring and
recovery, power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time
and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a
single, simple management console. Insight Control supports both Windows and Linux-based central
management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff
personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the
cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 2
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Overview
keep pace with the organization's changing business requirements.
Operating Systems and Virtualization Software:
Supports Windows, RHEL, SLES, Solaris, NetWare, VMware, and Citrix XenServer
NOTE: NetWare is not supported with Intel Xeon 5600 series processors.
Enclosures:
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL460c
G6 servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL460c G6
servers plugged horizontally.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard
Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network
of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. Certain restrictions and exclusions apply. Hard drives have either a one year or three year
warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 3
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
Processor
Six-Core Processors
One of the following
Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3)
depending on Model
Processor
Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3)
Processor
Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W, DDR3-1333, HT, Turbo 2/2/3/3/4/4)
Processor
Quad-Core Processors
Intel® Xeon® X5570 (2.93GHz/4-core/8MB/95W, DDR3-1333, HT, Turbo 2/2/3/3) Processor
Intel® Xeon® X5560 (2.80GHz/4-core/8MB/95W, DDR3-1333, HT, Turbo 2/2/3/3) Processor
Intel® Xeon® X5550 (2.66GHz/4-core/8MB/95W, DDR3-1333, HT, Turbo 2/2/3/3) Processor
Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5530 (2.40GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5520 (2.26GHz/4-core/8MB/80W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W, DDR3-800) Processor
Intel® Xeon® E5504 (2.0GHz/4-core/4MB/80W, DDR3-800) Processor
Intel® Xeon® L5530 (2.40GHz/4-core/8MB/60W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® L5520 (2.26GHz/4-core/8MB/60W, DDR3-1066, HT, Turbo 1/1/2/2) Processor
Intel® Xeon® L5506 (2.13GHz/4-core/4MB/60W, DDR3-800) Processor
Dual-Core Processors
Intel® Xeon® E5502 (1.86GHz/2-core/4MB/80W, DDR3-800) Processor
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo
Boost Technology, with 4, 3, 2, and 1 cores active (on 5500 series processors), or with 6, 5, 4, 3,
2, and 1 cores active (on 5600 series processors).
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 and 5600 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes
Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Upgradeability
Upgradeable to two (2) processors
Cache Memory
One of the following
depending on Model
4MB shared L3 cache
8MB shared L3 cache
12MB shared L3 cache
Chipset
Intel® 5500 Chipset
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 4
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Standard
6 GB (3 x 2GB) RDIMM
Maximum(RDIMM)
192GB (12 x 16 GB) for Registered Memory configurations
Maximum (UDIMM)
48 GB (12 x 4 GB) for Unbuffered Memory configurations
NOTE: Depending on the memory configuration and processor model the memory speed may run
at 1333MHz, 1066MHz or 800MHz. Please see the Online Memory Configuration Tool for details:
www.hp.com/go/ddr3memory-configurator
DDR3 memory options part number decoder
Network Controller
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet
module. Learn more at: www.hp.com/go/virtualconnect.
NOTE: The iSCSI offload feature of the embedded multifunction adapter requires the HP
Accelerated iSCSI Pack. For more information, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12466_div/12466_div.html
One (1) additional 10/100 NIC dedicated to iLO 2 Management
I/O Expansion Slots
Two (2) I/O expansion mezzanine slots (x8 PCI Express)
Integrated
Manageability
HP Integrated Lights-Out 2 (iLO 2) management processor
Storage Controller
Type
HP Smart Array P410i Controller (RAID 0/1)
Available Options: 256MB cache, Battery-Backed Write Cache (BBWC) module for 256MB
cache, 512MB cache with Battery Backed Write Cache (BBWC), 1G and 512MB Flash Backed
Write Cache (FBWC), and Smart Array Advanced Pack.
NOTE: Supports two (2) Small Form Factor (SFF) Hot Plug drive bays.
Maximum Internal
Storage
One of the following
depending on Model
Hot Plug SAS
2TB
2 x 1TB Serial SCSI
Hot Plug SATA
2TB
2 x 1TB Serial ATA
Hot Plug SATA SSD
240GB
2 x 120GB Serial ATA SSD
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 5
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Graphics
Integrated ATI RN-50, 64 MB video memory
Resolution Color Depths 1600 x 1200, 64K, 256, 16
1280 x 1024, 16.7M, 64k, 256, 16
1024 x 768, 16.7M, 64k, 256,16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
NOTE: Maximum resolution available via HP Integrated Lights-Out 2 (iLO 2) remote console is
1280 x 1024.
Fibre Channel Support Two (2) optional Fibre Channel HBAs are supported by the HP ProLiant BL460c G6. Both
mezzanine circuit boards connect directly to the server blade system board. These Fibre
Channel HBAs are available via option kits and must be ordered separately.
HBA mezzanine card option kits:
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology as Emulex's
renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all
Emulex HBAs
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 456972-B21)
Exceptional performance, enhanced security, and scalable management for virtual server
and enterprise-class applications
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver
whether they are using the QMH2462 or other HBAs powered by QLogic
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 451871-B21)
Provides a first step into the 8Gb future, advanced, embedded support for virtualized
environments and reduced power consumption
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
(PN 590647-B21)
Application oriented Quality of Service (AQoS) providing the ability to configure, prioritize,
and optimize traffic flows from virtual machines and/or applications to the target port
Brocade, Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds (4Gb HBAs)
8/4/2Gb/s auto negotiation speeds (8Gb HBAs)
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP Storage products and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating system environments
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 6
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Compatible SAN
HP ProLiant BL460c G6 server blades are optimized for HP MSA, EVA and XP.
HP ProLiant BL460c G6 server blades are compatible with select 3rd party SANs (please see
blade storage page for more details: http://h18004.www1.hp.com/products/blades/components/cclass-sans.html
HP Virtual Connect
HP Virtual Connect in an interconnect option for BladeSystem c-Class that simplifies server
connectivity to data and storage networks, and reduces costs. Unique HP Flex-10 and
FlexFabric technologies make maximum use of network bandwidths, provide dynamic tuning and
enable extreme flexibility to meet individual server and infrastructure requirements. HP Virtual
Connect Enterprise Manager (VCEM) provides a central console to administer network
connections and workloads for thousands of servers. For more information on Virtual Connect
Ethernet, Fibre Channel, Converged Network and management options see:
www.hp.com/go/virtualconnect
HP Insight
HP Insight Foundation
management software
Managing the growing number of servers can be complex and
expensive for your organization. IT managers need to address
changing business needs with tools that meet the challenges of
managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a
server's installation, configuration and maintenance throughout the
entire server lifecycle. This provides the customer with higher levels of
operational efficiency and highly reliable systems:
http://www.hp.com/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management DVD
HP ProLiant Smart Update Firmware DVD
SmartStart version supported (minimum): SmartStart 8.20.
http://www.hp.com/servers/smartstart
HP Integrated LightsOut (iLO)
HP Insight Control
NOTE: In an effort to support reducing our environmental impact, the
HP Insight Foundation Suite for ProLiant media will be available as a
selectable option for this server at time of order of a Factory Integrated
Model. This will allow customers to order the number of media kits that
best meet their needs and eliminate receiving unnecessary duplicate
media.
HP Integrated Lights-Out (iLO) simplifies server setup, health
monitoring, power and thermal control, and lights-out remote
administration of ProLiant ML, DL, and BL servers. HP iLO functions
without additional software and can be accessed from any location via
a web browser. HP iLO works hand-in-hand with HP Systems Insight
Manager, Insight Control, and Insight Dynamics for ProLiant, helping
customers unleash the value of the ProLiant platform and deliver the
highest possible quality of IT service. For more information, visit:
www.hp.com/go/iLO
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 7
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
management server: HP Insight Control for Linux, and HP Insight
Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates. For more information about
this service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics for HP Insight Dynamics for ProLiant, a product option, is advanced
ProLiant
infrastructure management software that enables IT staff to instantly
adjust their environments to meet dynamic business demands by
provisioning, optimizing and protecting complex infrastructure in
minutes. It's a powerful toolkit, integrated-by-design, that accelerates
complex technology projects and simplifies daily operations,
transforming data center economics. With Insight Dynamics IT
professionals can plan capacity and power continuously, balance
workloads across physical and virtual resources, and ensure costeffective high availability. It also enables IT organizations to provision
infrastructure consistently and automatically from pools of shared
resources using a self-service portal. Resources provisioned can range
from a single virtual machine to complex multi-tier environments and
their associated physical and virtual resource requirements. In addition
to the previous functional benefits, it also provides a cost-effective
disaster recovery for physical and virtual environments that works with
HP Continuous Access software for both the Enterprise Virtual Array
and the XP storage array allowing application environments to be
reactivated in minutes with the touch of a button to a remote location.
NOTE: For more information, visit:
http://www.hp.com/go/insightdynamics
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance
Computing, with a choice of servers, networks and software. Operating
system options include specially priced offerings for Red Hat Enterprise
Linux and Novell SLES, as well as Microsoft Windows HPC Server. A
Cluster Platform Configurator simplifies ordering.
http://www.hp.com/go/clusters
HP HPC Interconnects High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management HP Cluster Management Utility (CMU) is an HP-licensed and HPUtility
supported suite of tools that are used to manage large-scale Linux
ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value
HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HPPack
supported specially priced software bundle for the development and
deployment of applications on HPC Cluster Platforms. Value Pack
includes the Platform HPC Enterprise Edition suite of tools including
the LSF workload scheduler, the HP-MPI parallelization library. Also
included are the HP Unified Parallel C compiler and the HP Shmem
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 8
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
library, as well as the execution environments for the libraries and
compiler. HP HPC Linux Value Pack
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Availability
Industry Standard
Compliance
Security
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris 10 for x86/x64 based Systems
VMware
Citrix XenServer
NetWare
NOTE: NetWare is not supported with Intel Xeon 5600 series processors.
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/BL460cG6
Dual-Port Fibre Channel Mezzanine Card options for redundant SAN connection
Dual-port embedded 10 Gigabit Ethernet adapters for redundant LAN connections
Two (2) hot-plug SAS/SATA hard drive bays and integrated RAID (HP Smart Array P410i
Controller)
Optional Battery-backed and Flash-backed write cache module for integrated RAID
controller
Redundant ROM
Advanced ECC Memory
Support for Memory Mirroring and Memory Lock-Step Mode
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted
load balancing)
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a Global Setting
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 9
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Standard Features
Security - Trusted
Platform Module
The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts
used to authenticate the server platform. These artifacts can include passwords, certificates and
encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature
available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a
Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user
data and to ensure that a server running Windows Server 2008 has not been tampered with
while the system was offline.
NOTE: For more information about TPM, including a white paper, go to
http://www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing
or losing the key could result in data loss.
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
For more information on Factory Express services on your specific server model please contact
your sales representative or go to: http://h71028.www7.hp.com/enterprise/cache/97688-0-0-225121.html
HP Enterprise
Configurator
The HP e-Configure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 10
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner
who understands your increasingly complex business technology environment. That's why it
makes sense to team up with the people who know HP infrastructure hardware and software
best - the experienced professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support,
and manage IT and infrastructure solutions. This way, HP proposes services solutions that
include more than just uplift of base warranty. You can get the support you need by choosing
from one of a number of service packaged solutions we have designed to address wider set of
customer support needs:.
HP Technology Services meets business challenges with services offered in three
packages
Optimized Care Package, Standard Care Package, and Basic Care Package - available for each
product group. Such packaged solutions enable customers to optimize technology operations,
minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable support
packages for servers, storage, networking and software.
Optimized Care
Package
Supports maintaining servers at optimum performance availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for
c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP,
PMP and VPM. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
3-Year HP Critical Advantage for c3000/c7000 enclosure + 3-Year HP Critical Advantage for
Blade server
Provides end-to-end infrastructure support solution for business critical applications running on
virtualized/x86 infrastructures, enabling the customers to cost effectively build, operate, and
continuously improve their IT environment. http://h20195.www2.hp.com/V2/GetDocument.aspx?
docname=4AA3-1772ENW
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to
facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW
Additional Services: Virtualization Services - Strategy, Design, Transition, Operation, Continual
Service Improvement.
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 11
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Service and Support
Standard Care
Package
Package that maintains high level of server availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for
c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP,
PMP and VPM.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to
facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW
3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for c3000/c7000
enclosure + 3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for Blade
server
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting
the system to help return the hardware to operating condition within 6 hours of the initial service
request to the HP Global Solution Center. http://h20195.www2.hp.com/V2/GetPDF.aspx/59816636ENN
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML
and DL series servers or HP BladeSystem servers.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation &
Start Up and Software Support); Microsoft or Linux or VMware education courses; +60 Proactive
Select Credits, Factory Express.
Basic Care Package
Delivers minimum recommended support service level
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for
c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP,
PMP and VPM. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for c3000/c7000
enclosure + 3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for Blade
server
Provides you with rapid remote support and if required an HP authorized representative who will
arrive on site any time and day of the year to begin hardware maintenance service within 4 hours
of the service request being logged. http://h20195.www2.hp.com/V2/GetPDF.aspx/59826547EEE
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML
and DL series servers or HP BladeSystem servers.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services: Startup Blade System c-Cass Enhanced Network Service; Software OS
(Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up and Software Support); +30
Proactive Select Credits, Factory Express.
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 12
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Service and Support
Insight Remote
Support
The packages include HP Insight Remote Support that uses proven technology to deliver secure,
reliable 24x7 remote monitoring, diagnoses, and problem resolution. It is available at no
additional cost to all warranty, HP Care Pack Service, and service agreement customers.
For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP
sales representative or HP Authorized Channel Partner. Or visit:
www.hp.com/services/bladesystem
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 13
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Models
Models
HP ProLiant BL460c
G6 X5650 1P 6GB-R
P410i/ZM Server
595725-B21
Processor(s)
One of the following
depending on model
(1) Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) Processor
(1) Intel® Xeon® X5550 (2.66GHz/4-core/8MB/95W, DDR3-1333, HT,
Turbo 2/2/3/3) Processor
(1) Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W, DDR3-1066, HT,
Turbo 1/1/2/2) Processor
(1) Intel® Xeon® E5530 (2.40GHz/4-core/8MB/80W, DDR3-1066, HT,
Turbo 1/1/2/2) Processor
(1) Intel® Xeon® E5520 (2.26GHz/4-core/8MB/80W, DDR3-1066, HT,
Turbo 1/1/2/2) Processor
(1) Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W, DDR3-800)
Processor
(1) Intel® Xeon® L5520 (2.26GHz/4-core/8MB/60W, DDR3-1066, HT,
Turbo 1/1/2/2) Processor
(1) Intel® Xeon® E5502 (1.86GHz/2-core/4MB/80W, DDR3-800)
Processor
Cache Memory
4MB or 8MB shared L3 cache
Memory
6 GB (3 x 2 GB) PC3-10600 (DDR3-1333) Registered DIMMs
Network Adapter
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server
Adapter and one (1) additional 10/100 server adapter dedicated to iLO
2 management
Storage Controller
HP Smart Array P410i Controller (RAID 0/1)
Hard Drives
None ship standard
Internal Storage
SAS: 2TB (2 x 1TB SAS)
SATA: 2TB (2 x 1TB SATA)
SATA SSD: 240GB (2 x 120GB SATA SSD)
Optical Drive
None
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
HP ProLiant BL460c
G6 X5550 1P 6GB-R
P410i Server
507778-B21
HP ProLiant BL460c
G6 E5540 1P 6GB-R
P410i Server
507779-xx1
HP ProLiant BL460c
G6 E5530 1P 6GB-R
P410i Server
507780-B21
HP ProLiant BL460c
G6 E5520 1P 6GB-R
P410i Server
507782-B21
HP ProLiant BL460c
G6 E5506 1P 6GB-R
P410i Server
507783-B21
HP ProLiant BL460c
G6 E5502 1P 6GB-R
P410i Server
507784-B21
HP ProLiant BL460c
G6 L5520 1P 6GB-R
P410i Server
507781-B21
Country Code
xx=Worldwide
xx=Brazil
Rack Code Key
-B21
-201
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 14
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL460c G6 Configure-to-order Blade
Configurable Model ships with:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter and
one (1) additional 10/100 server adapter dedicated to iLO 2 management
Integrated Lights-Out 2 Standard Blade Edition
507864-B21
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted)
HP Processors
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxxB21.
Six Core Processor Option Kits
HP BL460c G6 Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W) FIO
Processor Kit
HP BL460c G6 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) FIO
Processor Kit
HP BL460c G6 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) FIO
Processor Kit
Quad-Core Processor Option Kits
HP BL460c G6 Intel® Xeon® X5570 (2.93GHz/4-core/8MB/95W) FIO Processor
Option Kit
HP BL460c G6 Intel® Xeon® X5560 (2.80GHz/4-core/8MB/95W) FIO Processor
Option Kit
HP BL460c G6 Intel® Xeon® X5550 (2.66GHz/4-core/8MB/95W) FIO Processor
Kit
HP BL460c G6 Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W) FIO
Processor Kit
HP BL460c G6 Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W) FIO Processor
Kit
HP BL460c G6 Intel® Xeon® E5530 (2.40GHz/4-core/8MB/80W) FIO Processor
Kit
HP BL460c G6 Intel® Xeon® L5530 (2.40GHz/4-core/8MB/60W) FIO Processor
Kit
HP BL460c G6 Intel® Xeon® L5520 (2.26GHz/4-core/8MB/60W) FIO Processor
Kit
HP BL460c G6 Intel® Xeon® E5520 (2.26GHz/4-core/8MB/80W) FIO Processor
Kit
HP BL460c G6 Intel® Xeon® L5506 (2.13GHz/4-core/4MB/60W) FIO Processor
Kit
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
595726-L21
595727-L21
595728-L21
507791-L21
507792-L21
507793-L21
595729-L21
507794-L21
507797-L21
507795-L21
507798-L21
507799-L21
513859-L21
Page 15
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Configuration Information - Factory Integrated Models
HP Memory
HP BL460c G6 Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W) FIO Processor
Kit
HP BL460c G6 Intel® Xeon® E5504 (2.0GHz/4-core/4MB/80W) FIO Processor
Kit
Dual-Core Processor Option Kits
HP BL460c G6 Intel® Xeon® E5502 (1.86GHz/2-core/4MB/80W) FIO Processor
Kit
Registered DIMMS (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low
Power Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series
processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series
processors.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energyefficient.
NOTE: PC3L is a low voltage memory.
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
507800-L21
507801-L21
507802-L21
500656-B21
500658-B21
500660-B21
593339-B21
604504-B21
500662-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
Page 16
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional
options, including server blade enclosures interconnect and mezzanine options and power subsystem options; please see
the Core Options and Additional sections below; or the following:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
and HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 17
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Core Options
HP Ethernet MezzanineGigabit Ethernet Mezzanines
Options
HP NC325m PCI Express Quad Port Gigabit Server Adapter
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on 2 of the 4 ports.
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000
Mbps, full duplex per port only. For more information, see the "Network
Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server
memory.
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or
10000Mbps when not connected to a Flex-10 enabled module and will link with
all current 1Gb switches at 1Gb.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring
of a FlexFabric Adapter to any of the supported protocols. For example iSCSI
to FCoE (Fibre Channel over Ethernet). Note that a HP Virtual Connect profile
takes precedence over the setting in this menu. Also, some FlexFabric
Adapters may require that network boot be enabled in order to configure the
protocol. If the protocol is configured without enabling network boot with certain
FlexFabric Adapters, the protocol may not take effect. Once the protocol has
taken effect on the first boot after configuring this option, network boot may be
disabled if desired.
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
HP BLc NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
HP NC553m 10Gb 2-port FlexFabric Adapter
HP Fiber Channel
Mezzanine Options
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
416585-B21
445978-B21
447883-B21
453246-B21
467799-B21
539857-B21
581204-B21
580151-B21
613431-B21
456972-B21
403621-B21
451871-B21
403619-B21
590647-B21
Page 18
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Core Options
HP Processors
Six-Core Processor Option Kits
HP BL460c G6 Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W) Processor
Kit
HP BL460c G6 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) Processor
Kit
HP BL460c G6 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) Processor
Kit
Quad-Core Processor Option Kits
HP BL460c G6 Intel® Xeon® X5570 (2.93GHz/4-core/8MB/95W) Processor Kit
HP BL460c G6 Intel® Xeon® X5560 (2.80GHz/4-core/8MB/95W) Processor Kit
HP BL460c G6 Intel® Xeon® X5550 (2.66GHz/4-core/8MB/95W) Processor Kit
HP BL460c G6 Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W) Processor
Kit
HP BL460c G6 Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W) Processor Kit
HP BL460c G6 Intel® Xeon® E5530 (2.40GHz/4-core/8MB/80W) Processor Kit
HP BL460c G6 Intel® Xeon® L5530 (2.40GHz/4-core/8MB/60W) Processor Kit
HP BL460c G6 Intel® Xeon® L5520 (2.26GHz/4-core/8MB/60W) Processor Kit
HP BL460c G6 Intel® Xeon® E5520 (2.26GHz/4-core/8MB/80W) Processor Kit
HP BL460c G6 Intel® Xeon® L5506 (2.13GHz/4-core/4MB/60W) Processor Kit
HP BL460c G6 Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W) Processor Kit
HP BL460c G6 Intel® Xeon® E5504 (2.00GHz/4-core/4MB/80W) Processor Kit
Dual-Core Process Option Kits
HP BL460c G6 Intel® Xeon® E5502 (1.86GHz/2-core/4MB/80W) Processor Kit
HP Memory
Registered DIMMS (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7
Low Power Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series
processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series
processors.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
595726-B21
595727-B21
595728-B21
507791-B21
507792-B21
507793-B21
595729-B21
507794-B21
507797-B21
507795-B21
507798-B21
507799-B21
513859-B21
507800-B21
507801-B21
507802-B21
500656-B21
500658-B21
500660-B21
593339-B21
604504-B21
500662-B21
604506-B21
500666-B21
500668-B21
Page 19
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Core Options
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: PC3L is a low voltage memory.
HP Hard Drives
500670-B21
500672-B21
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, firmware, and the server backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to an
acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 146GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard
Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty
Hard Drive
NOTE: Please see QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
NOTE: The hard drive options are not required when configuring a Drive-less
Model.
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard
Drive
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
HP 160GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
SATA Hot Plug SFF (2.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 5.4K rpm SFF (2.5-inch) Entry 1yr Warranty Hard Drive
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
619291-B21
581286-B21
581284-B21
507127-B21
512547-B21
507125-B21
512545-B21
605835-B21
507610-B21
625609-B21
507750-B21
530888-B21
460355-B21
Page 20
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Core Options
HP 120GB 1.5G SATA 5.4K rpm SFF (2.5-inch) Entry 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
SATA Hot Plug SFF Midline Solid State Drives
HP 60GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
HP 120GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13121_div/13121_div.html
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
458924-B21
572071-B21
572073-B21
Page 21
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
HP Insight software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates
Electronic License
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
Server License
HP Insight Software Media Kit
NOTE: Insight Software DVD media without licenses. Contains Insight Control,
Insight Dynamics and Virtual Connect Enterprise Manager. Uses an integrated
installer to perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support & Update Service.
NOTE: For additional license kits, including bundles with HP BladeSystem
enclosures, please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
NOTE: This part number can be purchased as a single license or as multiple
licenses with a single activation key. Customer will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one
year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: Electronic LTUs are only available through limited points of sales; if not
available, order a printed license entitlement certificate instead.
HP Insight Control for Linux including 1yr 24x7 Support Single Server License
HP Insight Control for Linux Media Kit
NOTE: This optional Media pack DVD contains the ISO image for HP Insight
Control for Linux, HP Systems Insight Manager, HP Insight Control power
management, HP Insight Control virtual machine management, and an
integrated installer. Servers must be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and latest
updates may be downloaded at no cost from: http://www.hp.com/go/ic-linux
(click on Download button).
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux
can be ordered separately, or can be downloaded at: http://www.hp.com/go/iclinux (click on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and are available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options,
please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem
Remote Management
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
T9074BAE
452148-B22
436222-B21
TC213AAE
TC209A
TC208A
Page 22
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
High Performance
Clusters
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server
License
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the HP Integrated Lights-Out (iLO)
QuickSpecs at: www.hp.com/go/iLO.
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic
License
HP Insight Control Server Deployment including 1yr 24x7 Support Single
Server License
NOTE: Licenses ship without media. The Insight Control Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
512488-B21
HP Cluster Management Utility Compute Node Flexible License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one node (server).
Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online in order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP Cluster Management Utility License and Media
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also
licenses CMU management. No license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP High Performance Computing Linux Value Pack 1 Processor Flexible
License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one socket (a.k.a.
processor). Customer will receive a printed end user license agreement and
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
QL803A
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
T9082AAE
452151-B21
433257-B21
TC293B
Page 23
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software
and documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
HP Security - TPM
HP Trusted Platform Module Option
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
HP Storage Controllers HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller
HP Smart Array P700m/256 4-ports Ext PCIe x8 SAS Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.html
(Worldwide)
Optional Upgrades
NOTE: The following options are for the integrated HP Smart Array P410i
Controller.
HP 256MB P-series Cache Upgrade
HP 650 mAh P-Series Battery
NOTE: This kit is only for use with the 256 MB Cache Module.
NOTE: This kit includes the cable required to attach battery to cache.
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: This kit includes the cable required to attach battery to cache.
HP 512MB Flash Backed Write Cache
HP 1GB Flash Backed Cache
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and
Updates Single Server License
NOTE: A license key, a minimum of 256MB cache, and battery kit is required to
enable Smart Array Advanced Pack features. For more information go to:
http://www.hp.com/go/saap
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html
(Worldwide)
HP I/O Expansion
Options
HP StorageWorks 320GB IO Accelerator for BladeSystem c-Class
HP 640GB IO Accelerator for BladeSystem c-Class
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13220_div/13220_div.html
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
TC294A
488069-B21
508226-B21
507925-B21
462968-B21
462969-B21
462967-B21
534916-B21
534562-B21
516471-B21
AJ878B
BK836A
Page 24
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
HP c-Class Mezzanine HP 4X QDR QLogic InfiniBand Dual Port Mezzanine HCA for c-Class
Options
BladeSystem
HP 4X QDR InfiniBand ConnectX-2 Dual Port Mezzanine HCA for c-Class
BladeSystem
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12586_div/12586_div.html
583210-B21
592519-B21
HP Ultrium Tape
Blades
HP StorageWorks SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem
(431643-B21) is required when installing a tape blade adjacent to a full-height
server blade.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
AQ697A
HP Storage Blades
HP StorageWorks LTO-5 SB3000c Tape Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
(Worldwide)
HP StorageWorks SB40c with Virtual SAN Appliance Software Bundle
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
(Worldwide)
HP D2200sb Storage Blade
NOTE: Please see the HP D2200sb PCIe Storage Blade QuickSpecs for
technical specifications and additional information at:
http://h18006.www1.hp.com/storage/bladesystem/index.html.
HP StorageWorks SB40c Storage Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
configuration information at:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
(Worldwide)
BS580A
HP Expansion Blade
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one
PCIe connect board which requires installation.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
AT459A
AP880A
411243-B21
448018-B21
Page 25
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Additional Options
HP USB and SD
Options
HP USB 2-Button Optical Scroll Mouse
HP USB Standard Keyboard
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that
support the VMware virtualization environment and other HP value-add
software like SmartStart. HP recommends this industry standard USB flash
device for use with VMware ESXi. USB device must be installed in the internal
slot of the ProLiant server for use with VMware ESXi. Refer to HP VMware
Getting Started Guide for installation instructions.
HP 4GB Secure Digital High Capacity Flash Media Kit
NOTE: Blank SD media devices are supported for use with VMware and Citrix.
SD media must be installed in the internal slot of the ProLiant server. Learn
more at: http://www.hp.com/go/proliantvirtualization
DC172B
DT528A#ABA
608447-B21
580387-B21
HP Care Pack Services NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class
server blades, cover the server blade and all HP branded hardware options
qualified for the server, purchased at the same time or afterwards, internal to the
server.
Hardware Services On-site Service
HP 3 year 4 hour 13x5 BL4xxc Server Blade Hardware Support
HP 3 year 4 hour 24x7 BL4xxc Server Blade Hardware Support
HP 3 year 6 hour 24x7 Call to Repair BL4xxc Server Blade Hardware Support
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
UK065E
UK066E
UK067E
Page 26
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Memory Population Guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For the HP ProLiant BL460c G6 server with twelve (12) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots.
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs).
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired
slots will be 1,4; 2,5 on the BL460c G6
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of
supporting 1.5V operations
DIMM slot/capacity/populated speed table
DIMM Type
DIMM Rank
DIMM Capacity
DIMM Native Speed (MHz)
DIMM Voltage
Unbuffered with ECC
DIMMs (UDIMMs)
Single
Quad Rank
Rank
Dual Rank (2R)
(4R)
(1R) Dual Rank (2R)
4GB
8GB
8GB
4GB 16GB 1GB
2GB
4GB
1333
1066
1333
1066
1066
1333
1333
1333
Reg
Reg LV/Reg Reg
Reg
Reg
Reg
Reg
Registered DIMMS (RDIMMs)
Single
Rank
(1R)
4GB
2GB
1333
1333
LV/Reg Reg
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
12
12
12
12
12
12
12
24
48
96
96
48
192
12
24
48
1333
1333*
1066
800
1066
800
1333
1333*
1333
1333*
1333
1333*
MAXIMUM CAPACITY (GB)
48
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333
1333
1333
1066
2 DIMM Per Channel
1333 1333* 1333* 1066
*Supported at 1333 via setting in ROM based setup utility (RBSU).
NOTES:
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz.
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even
if the slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be
1066MHz
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 27
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Memory
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of
the other channels, the maximum speed will be 1066MHz
Maximum memory speed will also depend on the processor installed
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
HP ProLiant BL460c G6 Server Blade DIMM slot and configuration diagrams
Basic memory slot and population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 1
slot #
1
2
12 DIMM SLOTS (6 per CPU node)
CPU1
CPU2
population order
slot #
population order
D
1
D
A
2
A
Chnl 1
Chnl 2
3
4
E
B
3
4
E
B
Chnl 2
Chnl 3
5
6
F
C
5
6
F
C
Chnl 3
HP ProLiant BL460c G6 Server Blade (1P Model)
Standard memory configuration (1 CPU model)
6GB (3 x 2GB) of PC3-10600 (DDR3-1333) RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: empty
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: empty
B: 2GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: empty
C: 2GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard Memory Plus Optional Memory (1 CPU model)
30 GB of PC3-10600 (DDR3-1333) RDIMMs (3 x 2GB plus 3 x 8GB)
Chnl 1
slot #
1
2
CPU1
population order
D: 2GB DIMM
A: 8GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 2GB DIMM
B: 8GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 2GB DIMM
C: 8GB DIMM
5
6
F: empty
C: empty
Chnl 3
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 28
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Memory
Standard Memory Replaced with Optional Memory (1 CPU model)
96GB of PC3-8500 Quad-Rank RDIMMs (6 x 16GB)
Chnl 1
slot #
1
2
CPU1
population order
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 16GB DIMM
B: 16GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 16GB DIMM
C: 16GB DIMM
5
6
F: empty
C: empty
Chnl 3
UDIMM maximum configuration (1 CPU model)
24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 4GB DIMM
A: 4GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 4GB DIMM
B: 4GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 4GB DIMM
C: 4GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard Memory Replaced with Optional Memory (2 CPU Model)
RDIMM maximum configuration
192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
CPU2
population order
D: 16GB DIMM
A: 16GB DIMM
Chnl 1
Chnl 2
3
4
E: 16GB DIMM
B: 16GB DIMM
3
4
E: 16GB DIMM
B: 16GB DIMM
Chnl 2
Chnl 3
5
6
F: 16GB DIMM
C: 16GB DIMM
5
6
F: 16GB DIMM
C: 16GB DIMM
Chnl 3
UDIMM maximum configuration (2 CPU model)
48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 29
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Memory
Chnl 1
slot #
1
2
CPU1
population order
D: 4GB DIMM
A: 4GB DIMM
slot #
1
2
CPU2
population order
D: 4GB DIMM
A: 4GB DIMM
Chnl 1
Chnl 2
3
4
E: 4GB DIMM
B: 4GB DIMM
3
4
E: 4GB DIMM
B: 4GB DIMM
Chnl 2
Chnl 3
5
6
F: 4GB DIMM
C: 4GB DIMM
5
6
F: 4GB DIMM
C: 4GB DIMM
Chnl 3
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
Following are memory options available from HP:
HP Memory
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low
Power Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series
processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series
processors.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: PC3L is a low voltage memory.
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
500656-B21
500658-B21
500660-B21
593339-B21
604504-B21
500662-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
Page 30
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Storage
1-2
2 x SFF SAS or SATA Hot Plug Hard Drives or
SATA solid state drives
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane)
should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported Controller
900GB 6G SAS 10K
600GB 6G SAS 10K
450GB 6G SAS 10K
300GB 6G SAS 10K
146GB 6G SAS 15K
146GB 6G SAS 10K
72GB 6G SAS 15K
2
1-2
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
1TB 3G SATA 7.2K
2
1-2
500GB 3G SATA 7.2K
HP Smart Array P410i Controller
Controller
HP Smart Array P410i Controller
SATA Non-Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
1TB 6G SAS 7.2K
2
1-2
HP Smart Array P410i Controller
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K
SATA Hot Plug SFF (2.5-inch) Entry (ETY) Drives
Quantity
Position
Supported
Supported
250GB 3G SATA 5.4K
2
1-2
120GB 1.5 G SATA 5.4K
SATA Hot Plug SFF Midline solid state drives
Quantity
Position
Supported
Supported
Controller
HP Smart Array P410i Controller
Controller
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 31
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Storage
120GB 3G SATA SSD
60GB 3G SATA SSD
2
1-2
HP Smart Array P410i Controller
External Storage
XP Disk Array Systems
Quantity
Supported
Please see the
XP Disk Array
Systems
QuickSpecs
below to
determine
configuration
requirements
Position
Supported
External
Host Controller or Adapter
Please see the XP Disk Array Systems Quick Specs for the
latest list of supported HBAs
HP XP10000 Disk Array:
http://h18006.www1.hp.com/products/storageworks/xp10000/index.html (Worldwide)
Enterprise Virtual Array Please see the
External
Please see the XP Disk Array Systems Quick Specs for the
Systems
XP Disk Array
latest list of supported HBAs
Systems
QuickSpecs
below to
determine
configuration
requirements
HP Enterprise Virtual Array Family:
http://h18006.www1.hp.com/products/quickspecs/12408_div/12408_div.html (Worldwide)
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 32
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Technical Specifications
System Unit
Dimensions (H x W x D) 7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)
(with bezel)
Weight
Maximum
16.5 lb (7.5 kg)
(approximate)
(all hard drives and
processors installed)
Minimum
10.75 lb (4.87 kg)
(one hard drive and
processor installed)
Power Specifications For power specifications including Input Requirements, BTU Rating, and
Power Supply Output, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
To review typical system power ratings use the HP BladeSystem Power
Sizer which is available via the online tool located at URL:
http://www.hp.com/go/bladesystem/powercalculator
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
For acoustic noise specifications, please see the HP BladeSystem cClass Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 33
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Technical Specifications
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
HP Smart Array P410i Disk Drive Interface
Controller
Server Interface
Cache Memory
3Gb (6Gb Capable) SAS (Serial Attached SCSI)
1.5Gb (3Gb Capable) SATA (Serial Advanced Technology Attachment)
x4 PCI Express host interface
0 MB (none) standard
Optional 256MB, 512MB, or 1GBCache Memory
2 (with standard 0MB cache)
Logical Drives
Supported
Maximum Logical Drive32 (with optional 256MB cache)
Capacity
64 (with optional 512MB cache)
Host Memory
64-bit, supporting servers memory space greater than 4 GB
Addressing
RAID Support
RAID 1( Mirroring)
RAID 0 (Striping)
Upgradeable Firmware Controller: Upgradeable Firmware with Recovery ROM feature
Online Drive Flash (with SAS drives) requires 256MB, 512MB, or 1GB
module
Embedded NC532i Dual Type
Port Flex-10 10GbE
Network Processor
Multifunction Server
Data Transfer Method
Adapter
Network Transfer Rate
IEEE Compliance
Standard Features
Integrated dual-port KR 10GbE
Broadcom 57711
x4 PCI Express Generation 2
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate
with 1 Gb HP BladeSystem c-Class interconnect components.
NOTE: Each port on the NC532i adapter transmits from the server at
only 20 Gbps (theoretical) full duplex.
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
ProLiant Teaming including Network Fault Tolerance, Transmit
Load Balancing, and Switch-Assisted Load Balancing
4K Jumbo frames
Microsoft Windows Receive Side Scaling (RSS)
Optional Accelerated iSCSI
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 34
QuickSpecs
HP ProLiant BL460c Generation 6 Server Blade
Technical Specifications
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13238 Worldwide QuickSpecs — Version 22 — 6.22.2011
Page 35
Download PDF
Similar pages