INSTALLATION INSTRUCTIONS
DIN RAIL MOUNTING KIT BC218
Mounting Clip
The Din Rail Mounting Kit can be used
with the following Baldor controls:
BC141, BC142, BC204, Series 5 Inverters
The Din Rail Mounting Kit consists of:
DESCRIPTION
Ro
e
t
ta
Mounting Plate
º
90
NO. PCS.
Mounting Plate
1
Mounting Clip
2
10–32 x 1/2 Screw
2
Figure 1
Caution: Do not overtighten mounting plate screws.
I.
STANDARD MOUNTING
Instructions: The mounting plate
can be positioned across the short
side of the "L" bracket of the speed
control as shown.
Figure 2
A) Horizontal mounting,
use (2) mounting clips
supplied. See figures
1 and 2.
B) Vertical mounting:
Use one (1) mounting
clip as shown
in figure 3.
Figure 3
II. ALTERNATE MOUNTING
An alternate mounting
method (see figure 4) is to
position the Mounting
Plate on the long side of
the "L" bracket. Either set of mounting slots can be used.
Figure 4
Baldor Electric Company
MOTORS AND DRIVES
P. O. Box 2400 Fort Smith, AR 72902-2400 U.S.A
(501) 646-4711 – Fax (501) 648-5792
International Fax: (501) 648-5895
MN1389
A40116 – Rev. A – 8/2001
Download PDF
Similar pages