Model 5570 Series SmartNode Enterprise Session Border

SmartNode 5570
Enterprise Session Border Router
User Manual
This is a Class A device and is not intended for use in a residential environment.
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: support@patton.com
WWW: www.patton.com
:
Part Number: 07MSN5570-GS, Rev. A
Patton Electronics Company, Inc.
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
tel: +1 (301) 975-1000
fax: +1 (301) 869-9293
support: +1 (301) 975-1007
web: www.patton.com
e-mail: support@patton.com
Trademark Statement
The term SmartNode is trademarks of Patton Electronics Company. All other trademarks presented in this document are the property of their respective owners.
Copyright © 2015, Patton Electronics Company. All rights reserved.
The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.
Warranty Information
The software described in this document is furnished under a license and may be used
or copied only in accordance with the terms of such license.
Patton Electronics warrants all SmartNode extender components to be free from
defects, and will—at our option—repair or replace the product should it fail within
one year from the first date of the shipment.
This warranty is limited to defects in workmanship or materials, and does not cover
customer damage, abuse or unauthorized modification. If the product fails to perform
as warranted, your sole recourse shall be repair or replacement as described above.
Under no condition shall Patton Electronics be liable for any damages incurred by the
use of this product. These damages include, but are not limited to, the following: lost
profits, lost savings and incidental or consequential damages arising from the use of or
inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed
an acceptance of these terms by the user.
Summary Table of Contents
1 General Information .......................................................................................................................................... 14
2 Applications Overview ....................................................................................................................................... 19
3 SmartNode Installation...................................................................................................................................... 22
4 Initial Configuration.......................................................................................................................................... 27
5 Contacting Patton for Assistance ........................................................................................................................ 32
A Compliance Information ................................................................................................................................... 35
B Specifications .................................................................................................................................................... 38
C Cabling ............................................................................................................................................................. 42
D Port pin-outs .................................................................................................................................................... 47
E SmartNode 5570 Factory Configuration ........................................................................................................... 50
F End User License Agreement ............................................................................................................................. 52
3
Table of Contents
Summary Table of Contents ...................................................................................................................................3
Table of Contents ...................................................................................................................................................4
List of Figures .........................................................................................................................................................7
List of Tables ..........................................................................................................................................................8
About this guide .....................................................................................................................................................9
Safety when working with electricity ...............................................................................................................11
Preventing electrostatic discharge damage .......................................................................................................12
General observations .......................................................................................................................................12
General conventions .......................................................................................................................................13
1 General Information .......................................................................................................................................... 14
SmartNode 5570 Overview ...................................................................................................................................15
SmartNode 5570 Rear Panel ...........................................................................................................................16
SmartNode 5570 Front Panel .........................................................................................................................18
2 Applications Overview ....................................................................................................................................... 19
Introduction ..........................................................................................................................................................20
Application—Edge Intelligence of Enterprise Communication .............................................................................20
Application—Multi-service ISDN, Secure VoIP and Data Routing Solution ........................................................21
3 SmartNode Installation...................................................................................................................................... 22
Planning the Installation........................................................................................................................................23
Site log ............................................................................................................................................................23
Network information ......................................................................................................................................23
Network Diagram ...........................................................................................................................................23
IP related information .....................................................................................................................................23
Software tools .................................................................................................................................................24
Power source ...................................................................................................................................................24
Location and mounting requirements .............................................................................................................24
Installing the Patton SmartNode ESBR .................................................................................................................24
Placing the SmartNode ...................................................................................................................................24
Installing cables ...............................................................................................................................................24
4 Initial Configuration.......................................................................................................................................... 27
Introduction ..........................................................................................................................................................28
Connecting the SmartNode to Your Laptop PC ....................................................................................................28
Configure the Desired IP Address..........................................................................................................................29
Factory-default IP Settings ..............................................................................................................................29
Login ..............................................................................................................................................................29
Changing the WAN IP address .......................................................................................................................29
Connecting the SmartNode to the Network ..........................................................................................................30
Loading the Configuration (optional)....................................................................................................................31
Additional Information .........................................................................................................................................31
4
SmartNode 5570 User Manual
Table of Contents
5 Contacting Patton for Assistance ........................................................................................................................ 32
Introduction ..........................................................................................................................................................33
Contact information..............................................................................................................................................33
Contacting Patton Technical Services for Free Support ...................................................................................33
Warranty Service and Returned Merchandise Authorizations (RMAs)...................................................................33
Warranty coverage ..........................................................................................................................................33
RMA numbers ................................................................................................................................................34
A Compliance Information ................................................................................................................................... 35
Compliance ...........................................................................................................................................................36
EMC ...............................................................................................................................................................36
Safety ..............................................................................................................................................................36
Radio and TV interference ....................................................................................................................................36
CE Declaration of Conformity ..............................................................................................................................36
Authorized European Representative .....................................................................................................................36
ISDN Compliance ................................................................................................................................................37
B Specifications .................................................................................................................................................... 38
DSP.......................................................................................................................................................................39
Voice Connectivity ................................................................................................................................................39
Data Connectivity .................................................................................................................................................39
Voice Processing (signalling dependent) ................................................................................................................39
Fax and modem support........................................................................................................................................40
Voice Signalling.....................................................................................................................................................40
Voice Routing—session router ..............................................................................................................................40
IP Services .............................................................................................................................................................41
Management .........................................................................................................................................................41
System ...................................................................................................................................................................41
Physical .................................................................................................................................................................41
C Cabling ............................................................................................................................................................. 42
Introduction ..........................................................................................................................................................43
Serial Console........................................................................................................................................................43
Ethernet ................................................................................................................................................................44
ISDN PRI (E1/T1) ...............................................................................................................................................45
D Port pin-outs .................................................................................................................................................... 47
Introduction ..........................................................................................................................................................48
Console port..........................................................................................................................................................48
Ethernet ...............................................................................................................................................................48
ISDN PRI (E1/T1) Port Pin-outs..........................................................................................................................49
E SmartNode 5570 Factory Configuration ........................................................................................................... 50
Introduction ..........................................................................................................................................................51
F End User License Agreement ............................................................................................................................. 52
End User License Agreement .................................................................................................................................53
1. Definitions ..................................................................................................................................................53
5
SmartNode 5570 User Manual
Table of Contents
2. Title ............................................................................................................................................................53
3. Term ...........................................................................................................................................................53
4. Grant of License ..........................................................................................................................................53
5. Warranty ....................................................................................................................................................53
6. Termination ................................................................................................................................................54
7. Other Licenses ............................................................................................................................................54
6
List of Figures
1
2
3
4
5
6
7
8
9
10
11
12
13
14
SmartNode 5570 (Front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SN5570 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SmartNode 5570 front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Edge intelligence of enterprise communication application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Multi-service ISDN, Secure VoIP and Data Routing Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Power LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Connecting the SmartNode to your Laptop PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting the SmartNode to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connecting a serial terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Typical Ethernet straight-through cable diagram for 10/100Base-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Typical Ethernet straight-through cable diagram for 1000Base-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
PRI E1/T1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
PRI E1/T1 cross-over cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
EIA-561 (RJ-45 8-pin) port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
7
List of Tables
1
2
3
4
5
6
7
8
9
10
General conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rear panel ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Rear Panel Ports (Continued) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SmartNode 5570 LED Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Sample site log entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Factory Default IP Address and Network Mask Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
10/100 Base-T RJ-45 socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
1000Base-T RJ-45 Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Port 0/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Port 0/1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
8
About this guide
This guide describes the SmartNode 5570 hardware, installation and basic configuration. For detailed software
configuration information refer to the Trinity Release 3.5.x- Command Line Reference Guide and the available
Knowledgebase.
Audience
This guide is intended for the following users:
• Operators
• Installers
• Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
•
•
•
•
•
•
•
•
•
•
Chapter 1 on page 14 provides information about router features and capabilities
Chapter 2 on page 19 contains an overview describing router operation and applications
Chapter 3 on page 22 provides quick start hardware installation procedures
Chapter 4 on page 27 provides quick-start procedures for configuring the SmartNode router
Chapter 5 on page 32 contains information on contacting Patton technical support for assistance
Appendix A on page 35 contains compliance and regulatory information for the router
Appendix B on page 38 contains specifications for the routers
Appendix C on page 42 provides cable recommendations
Appendix D on page 47 describes the ESBR’s ports and pin-outs
Appendix E on page 50 lists the factory configuration settings for SmartNode 5570
Appendix F on page 52 provides license information that describes acceptable usage of the software provided with the SmartNode 5570
For best results, read the contents of this guide before you install the ESBR.
9
SmartNode 5570 User Manual
About this guide
Precautions
Notes, cautions, and warnings, which have the following meanings, are used throughout this guide to help you
become aware of potential ESBR problems. Warnings are intended to prevent safety hazards that could result in
personal injury. Cautions refer to potential property damage or impaired functioning.
Note
WARNING
WARNING
CAUTION
Calls attention to important information.
The shock hazard symbol and WARNING heading indicate a
potential electric shock hazard. Strictly follow the warning
instructions to avoid injury caused by electric shock.
The alert symbol and WARNING heading indicate a potential
safety hazard. Strictly follow the warning instructions to avoid
personal injury.
The shock hazard symbol and CAUTION heading indicate a
potential electric shock hazard. Strictly follow the instructions to
avoid property damage caused by electric shock.
The alert symbol and CAUTION heading indicate a potential hazard. Strictly follow the instructions to avoid property damage.
CAUTION
10
SmartNode 5570 User Manual
About this guide
Safety when working with electricity
• This device contains no user serviceable parts. The
WARNING
•
•
•
•
device can only be repaired by qualified service personnel.
Do not open the device when the power cord is connected. For systems without a power switch, and without
an external power adapter, line voltages are present
within the device when the power cord is connected.
For devices with an external power adapter, the power
adapter shall be a listed Limited Power Source. The
mains outlet that is utilized to power the device shall be
within 10 feet (3 meters) of the device, shall be easily
accessible, and protected by a circuit breaker in compliance with local regulatory requirements.
For AC powered devices, ensure that the power cable
used meets all applicable standards for the country in
which it is to be installed.
For AC powered devices which have 3 conductor power
plugs (L1, L2 & GND or Hot, Neutral & Safety/Protective
Ground), the wall outlet (or socket) must have an earth
ground.
• For DC powered devices, ensure that the interconnecting
cables are rated for proper voltage, current, anticipated
temperature, flammability, and mechanical serviceability.
• WAN, LAN & PSTN ports (connections) may have hazardous network voltages are present, regardless of whether
the device is powered ON or OFF. PSTN relates to interfaces such as telephone lines. FXS, FXO, DSL, xDSL, T1,
E1, ISDN, Voice, etc. These are known as “hazardous network voltages” and to avoid electric shock use caution
when working near these ports. When disconnecting
cables for these ports, detach the far end connection of
the SmartNode first.
• Do not work on the device or connect or disconnect
cables during periods of lightning activity.
• If one has reason to open the chassis or case, then the
precautions mentioned above shall be followed. This
includes both the warnings relating to disconnection of
the input power, and the warnings relating to the disconnection of WAN, LAN & PSTN ports.
In accordance with the requirements of council directive 2002/96/
EC on Waste of Electrical and Electronic Equipment (WEEE),
ensure that at end-of-life you separate this product from other
waste and scrap and deliver to the WEEE collection system in
your country for recycling.
11
SmartNode 5570 User Manual
About this guide
Preventing electrostatic discharge damage
When starting to install interface cards place the interface card on its shielded plastic bag if you lay it on your bench.
CAUTION
Electrostatic Discharge (ESD) can damage equipment and
impair electrical circuitry. It occurs when electronic printed circuit
cards are improperly handled and can result in complete or intermittent failures. Do the following to prevent ESD:
• Always follow ESD prevention procedures when removing
and replacing cards.
• Wear an ESD-preventive wrist strap, ensuring that it makes
good skin contact. Connect the clip to an unpainted surface
of the chassis frame to safely channel unwanted ESD voltages to ground.
• To properly guard against ESD damage and shocks, the
wrist strap and cord must operate effectively. If no wrist strap
is available, ground yourself by touching the metal part of the
chassis.
General observations
• Clean the case with a soft slightly moist anti-static cloth
• Place the unit on a flat surface and ensure free air circulation
• Avoid exposing the unit to direct sunlight and other heat sources
• Protect the unit from moisture, vapors, and aggressive liquids
12
SmartNode 5570 User Manual
About this guide
Typographical conventions used in this document
This section describes the typographical conventions and terms used in this guide.
General conventions
The procedures described in this manual use the following text conventions:
Table 1. General conventions
Convention
Garamond blue type
Meaning
Indicates a cross-reference hyperlink that points to a figure, graphic, table, or section heading. Clicking on the hyperlink jumps you to the reference. When you
have finished reviewing the reference, click on the Go to Previous View button
in the Adobe® Acrobat® Reader toolbar to return to your starting point.
Helvetica bold type
Commands and keywords are in boldface font.
Helvetica bold-italic type
Parts of commands, which are related to elements already named by the user,
are in boldface italic font.
Italicized Helvetica type
Variables for which you supply values are in italic font
Helvetica type
Indicates the names of fields or windows.
Garamond bold type
Indicates the names of command buttons that execute an action.
<>
Angle brackets indicate function and keyboard keys, such as <SHIFT>, <CTRL>,
<C>, and so on.
[]
Elements in square brackets are optional.
{a | b | c}
Alternative but required keywords are grouped in braces ({ }) and are separated
by vertical bars ( | )
blue screen
Information you enter is in blue screen font.
screen
Terminal sessions and information the system displays are in screen font.
node
The leading IP address or nodename of a SmartNode is substituted with node in
boldface italic font.
SN
The leading SN on a command line represents the nodename of the SmartNode
#
An hash sign at the beginning of a line indicates a comment line.
13
Chapter 1
General Information
Chapter contents
SmartNode 5570 Overview ...................................................................................................................................15
SmartNode 5570 Rear Panel ...........................................................................................................................16
Ports descriptions ......................................................................................................................................16
SmartNode 5570 Front Panel .........................................................................................................................18
14
SmartNode 5570 User Manual
1 • General Information
SmartNode 5570 Overview
The SmartNode 5570 Enterprise Session Border Router (ESBR) (see figure 1) comes with built-in security features such as SIP TLS, SRTP, stateful firewall, and secure provisioning to protect the LAN networks from fraud
strikes out of the Internet. For survivability use cases the PRI (E1/T1) ports can be used for local PSTN breakout. The PRI ports can be used to connect legacy equipment to any VOIP network as well. Like any other
Trinity device, the 5570 comes with the built in WEB Wizard for ease of use.
Figure 1. SmartNode 5570 (Front)
The SmartNode 5570 series consists of several models: see the complete SKU list on the corresponding product
page on www.patton.com.
All the SN5570 models come equipped with two 10/100/1000 Base-T Ethernet ports and with either 1or 2
PRI (E1/T1) ports.
The SmartNode 5570 ESBR performs the following major functions:
• 30 channels of Voice over IP and local voice switching via 1 or 2 ISDN PRI E1/T1 ports. Each port can be
switched between NT and TE per software. However the port pin-out stays always the same. Also consider
the different pinout for port 0/1. Either port can be used as a clock source. Selected models have a Stratum
3 CO quality clock (HP) for installs where no external clock source is available.
• Depending on the model, a fallback cut-through relay between ISDN PRI ports 0/0 and 0/1 electrically
connects the NT and TE port in case of power failure and enables life-line calls to the public ISDN network
(PSTN-supplied ISDN line must be used).
• Standard compliant VoIP in accordance with SIPv2 protocol.
• Supports 15 SIP to SIP calls and can be license upgraded to a total of 512* (additional cost)
• Internet access and IP Routing with IP Quality of Service (QoS) support for mixed voice and data traffic.
• SIP registrar, SIP TLS, and SRTP are available on all SN5570 models.
• USB 2.0 host port for 3G/4G modem support, which can be used for Survivability applications as a data
backup link.
- A list of supported USB Models can be found in the release notes and in the Trinity Release 3.5.x- Command Line Reference Guide.
-*Supported under ideal conditions. Transcoding, debugging, and/or IP routing reduce processing capacity.
SmartNode 5570 Overview
15
SmartNode 5570 User Manual
1 • General Information
SmartNode 5570 Rear Panel
The SmartNode 5570 is a compact Enterprise Session Border Router that supports 30 VoIP or Fax calls, by
using either G.711, G.722, T.38 or any other codec as indicated under Voice Processing in Appendix B, “Specifications” on page 38. The SmartNode 5570 rear panel ports are described in table 2 on page 16.
Figure 2. SN5570 Rear Panel
Ports descriptions
The SmartNode 5570 Series rear panel ports are described in table 2.
Table 2. Rear panel ports
Port
Description
ETH 0/0 & ETH 0/1 Auto-MDX Fast-/Gigabit-Ethernet port, RJ45 (see figure 2), connects the
unit to an Ethernet WAN device (for example, a cable modem, DSL
modem, or fiber modem).
USB 2.0
USB 2.0 host port (see figure 2) to connect a USB 3G/4G Cellular
Modem.
A list of supported USB Models can be found in the release notes and in
the Trinity Release 3.5.x- Command Line Reference Guide
PRI 0/0 - PRI 0/1
RJ-45 connector providing E1 or T1 PRI interface, meeting
all requirements of ITU-T recommendations for G.703. Use a shielded E1
or T1 interface cable for 120 Ohm balanced connections to connect the
SmartNode with an NT or TE.
SmartNode 5570 Overview
Note
Port 0/1 uses a different pin-out than 0/0. Port 0/1 is
intended to be connected to a PBX and port 0/0 to the
PSTN by using a straight cable for both ports. Different
usage may require a PRI cross-over cable.
Note
Refer to Appendix C on page 42 for cabling and
Appendix D on page 47 for pin-outs
16
SmartNode 5570 User Manual
1 • General Information
Table 3. Rear Panel Ports (Continued)
Port
Console
Description
Used for service and maintenance, the console port (see figure 2 on
page 16) an RS-232 RJ-45 connector, connects the product to a serial
terminal such as a PC or ASCII Terminal (also called a dumb terminal).
Configuration settings:
• 19200 bps
• 8 bits, no parity
• 1 stop bit
• flow control off
12V DC, 1A
Electricity supply socket. (see figure 2 on page 16)
Reset
The reset button (see figure 2 on page 16) has three functions:
• Restart the unit with the current startup configuration—Press (for less
than 1 second) and release the Reset button to restart the unit with
the current startup configuration.
• Restart the unit with factory default configuration (shipping-config)—
Press the Reset button for at least 5 seconds but no longer than 15
seconds until all LEDs (see figure 3 on page 18) starts to blink, to
restart the unit with factory default configuration.
• Restart the unit with factory default configuration (shipping-config and
factory delivered Wizard files) and remove Wizard files added by user
as well as user uploaded preference files — Press the Reset button
for 15 or more seconds until all LEDs blink faster
SmartNode 5570 Overview
17
SmartNode 5570 User Manual
1 • General Information
Figure 3. SmartNode 5570 front panel
SmartNode 5570 Front Panel
Figure 3 shows SmartNode 5570 LEDs, the LED definitions are listed in table 4.
Table 4. SmartNode 5570 LED Definitions
LED
Description
Note If an error occurs, all LEDs will flash solid for MORE than 5 seconds
before the device reboots
Power
When lit, indicates power is applied. Blinks fast during bootloader phase
and blinks slow during boot process of Trinity Software. Becomes solid
when the system is up and running.
VoIP
• On indicates the gateway is registered to a SIP server, or, a SIP
device has registered to the SN5570.
• Off indicates the unit is not configured or registered, or has no active
direct routed VoIP connection.
PRI 0 – PRI 1
• Auxiliary LEDs for future use.
• On when L1 and L2 are active. Flashes when there are ongoing calls.
ETH 0 – ETH1
• Off when no line or PBX is connected or the port is shutdown.
• On when the Ethernet connection on the corresponding port has a
AUX 1 – AUX 4
link indication.
• Flashes when data is received or transmitted at the corresponding
Ethernet port.
GIG 0 – GIG 1
• On when the Ethernet is connected to a 1000Mb network.
• Off when the Ethernet is connected to a 10Mb or 100Mb network or
not connected
SmartNode 5570 Overview
18
Chapter 2
Applications Overview
Chapter contents
Introduction ..........................................................................................................................................................20
Application—Edge Intelligence of Enterprise Communication .............................................................................20
How it works: ...........................................................................................................................................21
Application—Multi-service ISDN, Secure VoIP and Data Routing Solution ........................................................21
19
SmartNode 5570 User Manual
2 • Applications Overview
Introduction
Patton’s SmartNode ESBRs deliver the features you need for advanced multiservice voice and data network
applications. They combine high quality voice-over-IP with powerful quality of service routing functions to
build professional, secure and reliable VoIP and data networks. This chapter describes typical applications for
which this SmartNode is uniquely suited.
Note
Detailed configuration information for SmartNode applications can be
found online at:
http://www.patton.com/session-border-controller/.
Application—Edge Intelligence of Enterprise Communication
Enterprises are excited about voice over IP and convergence for the following reasons:
• Bypassing the PSTN. Using Internet telephony service providers (ITSPs) instead of incumbent carriers dramatically reduces telephony costs
• IP PBXs, with their full suite of features and ease of integration into existing IT environments are very
appealing
• Convergence lowers technology ownership costs and enables enterprises to deploy new integrated applications
However, there are several concerns about migrating the whole telephony infrastructure to VoIP:
• Loss of voice quality
• Unknown reliability
• Lack of experience/expertise in voice over IP
• VoIP Security concerns
Patton’s SmartNode series of ESBRs address these concerns enabling enterprises to safely migrate to VoIP.
SmartNodes enable system administrators to gradually introduce VoIP, using it as the edge communication
device for all worlds, connecting PSTN, legacy PBX, ITSPs and an IP PBX.
Figure 4. Edge intelligence of enterprise communication application
Introduction
20
SmartNode 5570 User Manual
2 • Applications Overview
How it works:
1. Connect the SmartNode to the PSTN and legacy PBX, and configure the call router to pass all calls from
the PBX to the PSTN and vice versa. This first step will not affect any uses in the enterprise
2. Choose your ITSPs, and configure as many on the SmartNode as you need. Use the intelligent call router
in the SmartNode to decide which call is forwarded to which ITSP, and which calls should go to the
PSTN. This may be based upon least-cost routing criteria, or for example, on calling party number. The
latter is ideal if you want to test calls to an ITSP before enabling it for all users within the enterprise. As far
as supported by the ITSP, the SIP signaling but also the Media can be sent and received encrypted using
SIP TLS and SRTP.
3. Voice over IP can be switched off instantly on one single box (the SmartNode) to revert the system back to
as it was before.
4. Build up an IP PBX system that uses the SmartNode as PSTN gateway. For all calls from this IP PBX, you
can direct them to the PSTN or to ITSPs. Numbering plan adaptations are handled through regular
expression matching by the SmartNode. No need to change anything on the PBXs.
5. Once the IP PBX is ready, you can choose on incoming calls from the PSTN, for each extension whether
this extension is to be directed to the IP PBX or on the legacy PBX.
Application—Multi-service ISDN, Secure VoIP and Data Routing Solution
The SmartNode 5570 Series can be used to make and receive calls to and from the public ISDN network and
internet telephony services on any ISDN PRI PBX (see Figure 5). Using individually configurable routing
tables, an outbound call can be directed to the local PSTN connection or to an Internet telephony service provider (ISTP). Inbound calls from the Internet and the PSTN can ring the same phone.
Figure 5. Multi-service ISDN, Secure VoIP and Data Routing Solution
Broadband network connectivity integrates with any fixed IP, DHCP or PPPoE service. An integrated 10/100/
1000 Ethernet LAN port, with advanced routing features such as NAT, Stateful-Firewall/ACL, DynDNS,
packet–based routing, etc, fulfills the requirements of demanding network users.
Quality of Service (QoS) features complete the offering with advanced voice prioritization and traffic management. Patton’s patent-pending DownStreamQoS™ ensures voice without interruptions even over best-effort
Internet connections.
Application—Multi-service ISDN, Secure VoIP and Data Routing Solution
21
Chapter 3
SmartNode Installation
Chapter contents
Planning the Installation........................................................................................................................................23
Site log ............................................................................................................................................................23
Network information ......................................................................................................................................23
Network Diagram ...........................................................................................................................................23
IP related information .....................................................................................................................................23
Software tools .................................................................................................................................................24
Power source ...................................................................................................................................................24
Location and mounting requirements .............................................................................................................24
Installing the Patton SmartNode ESBR .................................................................................................................24
Placing the SmartNode ...................................................................................................................................24
Installing cables ...............................................................................................................................................24
Connecting ISDN PBX and NT to the SmartNode’s ISDN PRI ports .....................................................25
Connecting the 10/100/1000Base-T Ethernet LAN and WAN cables ......................................................25
Connecting the Power Supply ...................................................................................................................26
22
SmartNode 5570 User Manual
3 • SmartNode Installation
Planning the Installation
Before installing the SmartNode device, the following tasks should be completed:
• Create a network diagram (see section “Network information” on page 23)
• Gather IP related information (see section “IP related information” on page 23 for more information)
• Install the hardware and software needed to configure the SmartNode. (See section “Software
tools” on page 24)
• Verify power source reliability (see section “Power source” on page 24).
When you finish preparing for SmartNode installation, go to section “Installing the Patton SmartNode ESBR”
on page 24 to install the device.
Site log
Patton recommends that you maintain a site log to record all actions relevant to the system, if you do not
already keep such a log. Site log entries should include information such as listed in Table 5.
Table 5. Sample site log entries
Entry
Description
Installation
Make a copy of the installation checklist and insert it into the site log
Upgrades and maintenance
Use the site log to record ongoing maintenance and expansion history
Configuration changes
Record all changes and the reasons for them
Maintenance
Schedules, requirements, and procedures performed
Comments
Notes, and problems
Software
Changes and updates to Trinity software
Network information
Network connection considerations that you should take into account for planning are described for several
types of network interfaces in the following sections.
Network Diagram
Draw a network overview diagram that displays all neighboring IP nodes, connected elements and telephony
components.
IP related information
Before you can set up the basic IP connectivity for your SmartNode 5570 you should have the following information:
• IP addresses used for Ethernet LAN and WAN ports
• Subnet mask used for Ethernet LAN and WAN ports
• IP addresses and/or URL of SIP servers or Internet telephony services (if used)
Planning the Installation
23
SmartNode 5570 User Manual
3 • SmartNode Installation
• Login and password for PPPoE Accesss
• Login and Password for SIP based telephony services
• IP addresses of central TFTP server used for configuration upload and download (optional)
Software tools
You will need a PC (or equivalent) with Windows Telnet or a program such as Tera Term Pro or Putty to configure the software on your SmartNode router.
Also you may use your WEB browser to configure the unit. The Web wizard in this case reduces time to get
your unit up and running. See more details on the Knowledgebase.
Power source
If you suspect that your AC power is not reliable, for example if room lights flicker often or there is machinery
with large motors nearby, have a qualified professional test the power. Patton recommends that you include an
uninterruptible power supply (UPS) in the installation to ensure that VoIP service is not impaired if the power
fails.
Location and mounting requirements
The SmartNode router is intended to be placed on a desktop or similar sturdy, flat surface that offers easy
access to cables. Allow sufficient space at the rear of the chassis for cable connections. Additionally, you should
consider the need to access the unit for future upgrades and maintenance.
Installing the Patton SmartNode ESBR
SmartNode ESBR installation consists of the following:
• Placing the device at the desired installation location (see section “Placing the SmartNode” on page 24)
• Installing the interface and power cables (see section “Installing cables” on page 24)
When you finish installing the SmartNode, go to Chapter 4, “Initial Configuration” on page 27.
Placing the SmartNode
Place the ESBR on a desktop or similar sturdy, flat surface that offers easy access to the cables. The ESBR
should be installed in a dry environment with sufficient space to allow air circulation for cooling. In order to
prevent overheating and damaging the unit, proper ventilation is required when stacking the device. Please
consider the note below:
Note
For proper ventilation, leave at least 2 inches (5 cm) to the left, right, front,
top, and rear of the SmartNode ESBR.
Installing cables
Do not work on the system or connect or disconnect
cables during periods of lightning activity.
WARNING
Installing the Patton SmartNode ESBR
24
SmartNode 5570 User Manual
WARNING
3 • SmartNode Installation
The Interconnecting cables shall be acceptable for external
use and shall be rated for the proper application with
respect to voltage, current, anticipated temperature, flammability, and mechanical serviceability.
Connect the cables in the following order:
1. Connect the ISDN PBX and NT to the PRI ports (see section “Connecting ISDN PBX and NT to the
SmartNode’s ISDN PRI ports”)
2. Connect the 10/100/1000Base-T Ethernet LAN and WAN (see section “Connecting the 10/100/
1000Base-T Ethernet LAN and WAN cables”)
3. Connect the power mains cable (see section“Connecting the Power Supply” on page 26)
Connecting ISDN PBX and NT to the SmartNode’s ISDN PRI ports
The SmartNode comes with one or two ISDN PRI (E1/T1) ports located on the rear panel (see figure 2 on
page 16). Both ports (0/0 and 0/1) can be connected to the PSTN (ISDN NT) or to a PBX (ISDN TE). In
either case, one PRI cross over cable must be used due to the different pin-out used on port 0/1.
However, the application is meant to have the ISDN PBX connected to PRI port 0/1 and the ISDN PSTN to
port 0/0. This way a straight trough cable can be used for both connections.
CAUTION
Note
For the ISDN connection to a carrier Network, it shall be connected to a Network Termination Device and not connected
directly to an outside POTS line.
On Lifeline Relay models (/R option) the PSTN line should be connected to
PRI 0/0 and a terminal to PRI 0/1 to benefit from the lifeline function. (See
the full list of models on www.patton.com).
For details on the PRI port pinout and ISDN cables, refer to Appendix C, “Cabling” on page 42 and Appendix
D, “Port pin-outs” on page 47.
Connecting the 10/100/1000Base-T Ethernet LAN and WAN cables
The SmartNode 5570 has automatic MDX (auto-cross-over) detection and configuration on the Ethernet
ports. Any of the two ports can be connected to a host or hub/switch with a straight-through wired cable.
1. Connect to the subscriber port of the broadband access modem (DSL, cable, WLL) to ETH 0/0.
2. Connect port ETH 0/1 to your LAN.
For details on the Ethernet port pinout and cables, refer to Appendix C, “Cabling” on page 42 and Appendix
D, “Port pin-outs” on page 47.
Installing the Patton SmartNode ESBR
25
SmartNode 5570 User Manual
3 • SmartNode Installation
Connecting the Power Supply
Do the following to connect the main power to the Model 5570:
Note
Do not connect the power cord to the AC Mains at this time.
1. Insert the female end of the AC power supply cable to the mains port (see figure 2 on page 16).
CAUTION
There are no user-serviceable parts in the power supply section
of the model SN5570. Contact Patton Electronics Technical
Support at support@patton.com for more information
2. Verify that the AC power cord included with your device is compatible with local standards. If it is not,
refer to “Contacting Patton for Assistance” on page 32 to find out how to replace it with a compatible
power cord.
3. Connect the male end of the power cord to an appropriate power outlet.
Power
Figure 6. Power LED
4. Verify that the green Power LED is lit (see figure 6). Blinks fast during bootloader phase and blinks slow
during boot process of Trinity Software. Becomes solid when the system is up and running.
Congratulations, you have finished installing the SmartNode Enterprise Session Border Router! Now go to
Chapter 4, “Initial Configuration” on page 27.
Installing the Patton SmartNode ESBR
26
Chapter 4
Initial Configuration
Chapter contents
Introduction ..........................................................................................................................................................28
Connecting the SmartNode to Your Laptop PC ....................................................................................................28
Configure the Desired IP Address..........................................................................................................................29
Factory-default IP Settings ..............................................................................................................................29
Login ..............................................................................................................................................................29
Changing the WAN IP address .......................................................................................................................29
Connecting the SmartNode to the Network ..........................................................................................................30
Loading the Configuration (optional)....................................................................................................................31
Additional Information .........................................................................................................................................31
27
SmartNode 5570 User Manual
4 • Initial Configuration
Introduction
This chapter leads you through the basic steps to set up a new SmartNode and to download a configuration.
Setting up a new SmartNode consists of the following main steps:
Note
If you haven’t already installed the SmartNode, refer to Chapter 3, "SmartNode Installation" on page 22.
• Connecting the SmartNode to your laptop PC
• Configuring the desired IP address
• Connecting the SmartNode to the network
• Loading the configuration (optional)
Connecting the SmartNode to Your Laptop PC
First, the SmartNode must be connected to the main power supply with the power cable. Wait until the Power
LED stops blinking and stays lit constantly. Now the SmartNode is ready.
CAUTION
CAUTION
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and
mechanical serviceability.
For the ISDN connection to a carrier network, it shall be connected to a network termination device and not connected
directly to an outside POTS line.
The SmartNode 5570 Series is equipped with Auto-MDX Ethernet ports, so you can use straight-through
cables for host or hub/switch connections (see figure 7).
Straight-through wired cable
LAN (ETH 0/1)
Laptop PC
Figure 7. Connecting the SmartNode to your Laptop PC
The SmartNode comes with a built-in DHCP server to simplify configuration. Therefore, to automatically
configure the PC for IP connectivity to the SmartNode, the Laptop PC must be configured for DHCP. The
SmartNode will provide the PC with an IP address. You can check the connection to the SmartNode by executing the ping command from the PC command window as follows:
ping 192.168.1.1
Introduction
28
SmartNode 5570 User Manual
4 • Initial Configuration
Configure the Desired IP Address
Factory-default IP Settings
The factory default configuration for the Ethernet interface IP addresses and network masks are listed in Table 6.
Both Ethernet interfaces are activated upon power-up. LAN interface ETH 0/1 (LAN) provides a default
DHCP server, the WAN interface uses DHCP client to automatically assign the IP address and network mask.
Table 6. Factory Default IP Address and Network Mask Configuration
IP Address
Network Mask
WAN Interface Ethernet 0 (ETH 0/0)
DHCP
DHCP
LAN Interface Ethernet 1 (ETH 0/1)
192.168.1.1
255.255.255.0
DHCP Address Range
192.168.1.10–192.168.1.99
255.255.255.0
If these addresses match with those of your network, go to section “Connecting the SmartNode to the Network” on page 30. Otherwise, refer to the following sections to change the addresses and network masks.
Login
To access the SmartNode, start the Telnet application. Type either the host name
smartnode.local
or the default IP address into the address field of the Telnet application:
192.168.1.1
Accessing your SmartNode via a Telnet session displays the login screen. Type the factory default login: admin
and leave the password empty. Press the Enter key after the password prompt.
login:admin
password: <Enter>
192.168.1.1>

After you have successfully logged in you are in the operator execution mode, indicated by > as command line
prompt. With the commands enable and configure you enter the configuration mode.
192.168.1.1>enable
192.168.1.1#configure
192.168.1.1(cfg)#
Changing the WAN IP address
Select the context IP mode to configure an IP interface.
192.168.1.1 (cfg) #context ip ROUTER
192.168.1.1 (ctx-ip) [ROUTER} #

Now you can set your IP address and network mask for the interface ETH 0/0 (WAN). Within this example a
network 172.16.1.0/24 address is assumed. The IP address in this example is set to 172.16.1.99 (you should set
the IP address given to you by your network provider).
Configure the Desired IP Address
29
SmartNode 5570 User Manual
4 • Initial Configuration
192.168.1.1(ctx-ip)[Router]#interface WAN
192.168.1.1(if-ip)[WAN]#no ipaddress DHCP
192.168.1.1(if-ip)[WAN]#ipaddress WAN 172.16.1.99/24
2002-10-28T00:09:40 : LOGINFO
: Link down on interface WAN.
2002-10-29T00:09:40 : LOGINFO
: Link up on interface WAN.
172.16.1.99(if-ip)[WAN]#

Copy this modified configuration to you new start-up configuration. This will store your changes in 
non-volatile memory. Upon the next start-up the system will initialize itself using the modified configuration.
Note
The modified configuration is applied immediately. It is not necessary to
reboot the device when changing any configuration parameter.
172.16.1.99(if-ip) [WAN]#copy running-config startup-config
172.16.1.99(if-ip) [WAN]

The SmartNode can now be connected to your network.
Connecting the SmartNode to the Network
In general, the SmartNode will connect to the network via the WAN (ETH 0/0) port. This enables the SmartNode to offer routing services to the PC hosts on LAN (ETH 0/1) port. The SmartNode 5570 Series is
equipped with Auto-MDX Ethernet ports, so you can use straight through or crossover cables for host or hub/
switch connections. (see figure 8).
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
For the ISDN connection to a carrier network, it shall be connected to a network termination device and not connected
directly to an outside POTS line.
CAUTION
LAN
Straight-through wired or crossover cable
LAN (ETH 0/1)
WAN (ETH 0/0)
Network
Figure 8. Connecting the SmartNode to the network
Connecting the SmartNode to the Network
30
SmartNode 5570 User Manual
4 • Initial Configuration
You can check the connection with the ping command from the SmartNode to another host on the network.
172.16.1.99(if-ip)[WAN]#ping <IP Address of the host>
Note
If the WAN address is not set to DHCP, to ping a device outside your local
LAN you must first configure the default gateway. (For information on configuring the default gateway, refer to section “Set IP addresses” in the Trinity
Release 3.5.x– Command Line Reference Guide.)
Note
Connecting both ethernet ports to the same switch will only work if the
switch has separate ARP tables for each connection.
Loading the Configuration (optional)
Patton provides a collection of configuration templates on the support page at: 
http://www.patton.com/support/kb.asp —one of which may be similar enough to your application that you
can use it to speed up configuring the SmartNode. Simply download the configuration note that matches your
application to your PC. Adapt the configuration as described in the configuration note to your network
(remember to modify the IP address) and copy the modified configuration to a TFTP server. The SmartNode
can now load its configuration from this server.
Note
If your application is unique and not covered by any of Patton’s configuration templates, you can manually configure the SmartNode instead of loading a configuration file template. In that case, refer to the SmartNode Series
Trinity Release 3.5.x– Command Line Reference Guide for information on
configuring the SmartNode device.
In this example we assume the TFTP server on the host with the IP address 172.16.1.11 and the configuration
named SN.cfg in the root directory of the TFTP server.
172.16.1.99(if-ip)[WAN]#copy tftp://172.16.1.11/sn.cfg startup-config
172.16.1.99(if-ip)[WAN]#

After the SmartNode has been rebooted the new startup configuration will be activated.
172.16.1.99(if-ip)[WAN]#reload
Press ‘yes’ to restart, ‘no’ to cancel :yes
The system is going down NOW

Additional Information
For detailed information about configuring and operating guidance, set up procedures, and troubleshooting,
refer to the Trinity Release 3.5.x– Command Line Reference Guide available online at www.patton.com/manuals.
Loading the Configuration (optional)
31
Chapter 5
Contacting Patton for Assistance
Chapter contents
Introduction ..........................................................................................................................................................33
Contact information..............................................................................................................................................33
Contacting Patton Technical Services for Free Support ...................................................................................33
Warranty Service and Returned Merchandise Authorizations (RMAs)...................................................................33
Warranty coverage ..........................................................................................................................................33
Out-of-warranty service .............................................................................................................................34
Returns for credit ......................................................................................................................................34
Return for credit policy .............................................................................................................................34
RMA numbers ................................................................................................................................................34
Shipping instructions ................................................................................................................................34
32
SmartNode 5570 User Manual
5 • Contacting Patton for Assistance
Introduction
This chapter contains the following information:
• “Contact information”—describes how to contact Patton technical support for assistance.
• “Warranty Service and Returned Merchandise Authorizations (RMAs)”—contains information about the
warranty and obtaining a return merchandise authorization (RMA).
Contact information
Patton Electronics offers a wide array of free technical services. If you have questions about any of our other
products we recommend you begin your search for answers by using our technical knowledge base. Here, we
have gathered together many of the more commonly asked questions and compiled them into a searchable
database to help you quickly solve your problems.
Contacting Patton Technical Services for Free Support
REGION
North America
Western Europe
Central & Eastern
Europe
Middle East North
Africa
Location
Maryland, USA
Bern, Switzerland
Budapest, Hungary
Beirut, Lebanon
Time Zone
EST/EDT
CET/CEDT
CET/CEDT
EET/EEDT
UTC/GMT - 4/5 hours
UTC/GMT + 1/2 hours
UTC/GMT + 1/2 hours
UTC/GMT + 2/3 hours
Monday-Friday
8:00am to 5:00pm
Monday-Friday
09:00 to 12:00
13:30 to 17:30
Monday-Friday
8:30 to 17:00
Monday-Friday
8:00am to 5pm
support@patton.com
support@patton.com
+36 439 3835
+96 1 359 1277
Business
Hours
Email
support@patton.com support@patton.com
Phone
+ 1 301 975 1007
+41 31 985 25 55
Fax
+1 301 869 9293
+41 31 985 2526
Warranty Service and Returned Merchandise Authorizations (RMAs)
Patton Electronics is an ISO-9001 certified manufacturer and our products are carefully tested before shipment. All of our products are backed by a comprehensive warranty program.
Note
If you purchased your equipment from a Patton Electronics reseller, ask your
reseller how you should proceed with warranty service. It is often more convenient for you to work with your local reseller to obtain a replacement.
Patton services our products no matter how you acquired them.
Warranty coverage
Our products are under warranty to be free from defects, and we will, at our option, repair or replace the product should it fail within one year from the first date of shipment. Our warranty is limited to defects in workmanship or materials, and does not cover customer damage, lightning or power surge damage, abuse, or
unauthorized modification.
Introduction
33
SmartNode 5570 User Manual
5 • Contacting Patton for Assistance
Out-of-warranty service
Patton services what we sell, no matter how you acquired it, including malfunctioning products that are no
longer under warranty. Our products have a flat fee for repairs. Units damaged by lightning or other catastrophes may require replacement.
Returns for credit
Customer satisfaction is important to us, therefore any product may be returned with authorization within 30
days from the shipment date for a full credit of the purchase price. If you have ordered the wrong equipment or
you are dissatisfied in any way, please contact us to request an RMA number to accept your return. Patton is
not responsible for equipment returned without a Return Authorization.
Return for credit policy
• Less than 30 days: No Charge. Your credit will be issued upon receipt and inspection of the equipment.
• 30 to 60 days: We will add a 20% restocking charge (crediting your account with 80% of the purchase price).
• Over 60 days: Products will be accepted for repairs only.
RMA numbers
RMA numbers are required for all product returns. You can obtain an RMA by doing one of the following:
• Completing a request on the RMA Request page in the Support section at www.patton.com
• By calling +1 (301) 975-1007 and speaking to a Technical Support Engineer
• By sending an e-mail to returns@patton.com
All returned units must have the RMA number clearly visible on the outside of the shipping container. Please use
the original packing material that the device came in or pack the unit securely to avoid damage during shipping.
Shipping instructions
The RMA number should be clearly visible on the address label. Our shipping address is as follows:
Patton Electronics Company
RMA#: xxxx
7622 Rickenbacker Dr.
Gaithersburg, MD 20879-4773 USA
Patton will ship the equipment back to you in the same manner you ship it to us. Patton will pay the return
shipping costs.
Warranty Service and Returned Merchandise Authorizations (RMAs)
34
Appendix A Compliance Information
Chapter contents
Compliance ...........................................................................................................................................................36
EMC ...............................................................................................................................................................36
Safety ..............................................................................................................................................................36
Radio and TV interference ....................................................................................................................................36
CE Declaration of Conformity ..............................................................................................................................36
Authorized European Representative .....................................................................................................................36
ISDN Compliance ................................................................................................................................................37
35
SmartNode 5570 User Manual
A • Compliance Information
Compliance
EMC
• FCC Part 15, Class A
• EN55022, Class A
• EN55024
Safety
• UL60950-1/CSA C22.2 No. 60950-1
• IEC/EN 60950-1, 2nd edition
• AS/NZS 60950-1
Radio and TV interference
The SmartNode router generates and uses radio frequency energy, and if not installed and used properly—that
is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and television
reception. The SmartNode router has been tested and found to comply with the limits for a Class A computing
device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide
reasonable protection from such interference in a commercial installation. However, there is no guarantee that
interference will not occur in a particular installation. If the SmartNode router does cause interference to radio
or television reception, which can be determined by disconnecting the unit, the user is encouraged to try to
correct the interference by one or more of the following measures: moving the computing equipment away
from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different
AC outlet (such that the computing equipment and receiver are on different branches).
CE Declaration of Conformity
Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other provisions of Council Directive 1999/5/EC on the approximation of the laws of the member states relating to
Radio and Telecommunication Terminal Equipment and the mutual recognition of their conformity.
The safety advice in the documentation accompanying this device shall be obeyed. The conformity to the
above directive is indicated by the CE mark on the device.
The signed Declaration of Conformity can be downloaded at www.patton.com/certifications.
Authorized European Representative
D R M Green
European Compliance Services Limited.
Oakdene House, Oak Road,
Watchfield, Swindon, Wilts SN6 8TD, UK
Compliance
36
SmartNode 5570 User Manual
A • Compliance Information
ISDN Compliance
The device is approved for connection to the public ISDN telecommunication network.
CAUTION
ISDN Compliance
For the ISDN connection to a carrier network, it shall be connected to a network termination device and not connected
directly to an outside POTS line.
37
Appendix B Specifications
Chapter contents
DSP.......................................................................................................................................................................39
Voice Connectivity ................................................................................................................................................39
Data Connectivity .................................................................................................................................................39
Voice Processing (signalling dependent) ................................................................................................................39
Fax and modem support........................................................................................................................................40
Voice Signalling.....................................................................................................................................................40
Voice Routing—session router ..............................................................................................................................40
IP Services .............................................................................................................................................................41
Management .........................................................................................................................................................41
System ...................................................................................................................................................................41
Physical .................................................................................................................................................................41
38
SmartNode 5570 User Manual
Note
B • Specifications
Refer to the software feature matrix for the most up-to-date specifications.
DSP
Two 16 channel DSP
Voice Connectivity
1 or 2 ISDN PRI ports, 4-wire
RJ45 ports NT/TE configurable per port (layer 1 pin-out does not change)
Life-line bypass relay between PRI 0/0 and PRI 0/1 ports (Depends on model; /R option)
Data Connectivity
Two 10/100/1000Base-TX Ethernet ports
All ports full duplex, autosensing, auto-MDX
Voice Processing (signalling dependent)
15 to 30 full-duplex channels with Voice CODECS:
• G.711 A-Law/-Law (64 kbps)
• G.722 (64 kbps)
• G.726 (ADPCM 16,24,32,40 kbps)
• G.723.1 (5.3 or 6.3 kbps)
• G.729ab (8kbps)
• Transparent ISDN data
G.168 echo cancellation (128ms)
15 to 30 simultaneous low-bandwidth voice or T.38 fax calls
DTMF detection and generation
Carrier tone detection and generation
Silence suppression and comfort noise
Adaptive and configurable dejitter buffer
Configurable tones (dial, ringing, busy, etc.)
Configurable transmit packet length
RTP/RTCP (RFC 1889)
SRTP (RFC 3711)
DSP
39
SmartNode 5570 User Manual
B • Specifications
Fax and modem support
Automatic fax and modem detection
Codec fallback for modem-bypass
T.38 Fax-Relay (Gr. 3 Fax, 9.6 k, 14.4 K)
G.711 Fax-Bypass
Voice Signalling
SIPv2, SIPv2 over TLS
SIP call transfer, redirect
Overlap or en-bloc dialing
DTMF in-band, out-of-band
Configurable progress tones
Voice Routing—session router
Local switching (hairpinning)
Least cost routing
Interface huntgroups
Call-Distribution groups
Number blocking
Call Routing Criteria:
• Interface
• Calling/called party number
• Time of day, day of week, date
• ISDN bearer capability
• Various other information elements (IEs) of the ISDN setup
• Wildcard and regular expression matching
Regular expression number manipulation functions:
• Replace numbers
• Add/remove digits
• Pattern matching and replacement
Fax and modem support
40
SmartNode 5570 User Manual
B • Specifications
IP Services
IPv4 router; IPv6 basic functionalities
Programmable static routes and policy-routing
ICMP redirect (RFC 792); Packet fragmentation
DiffServe/ToS set or queue per header bits
Packet Policing discards excess traffic
DHCP client and server
DNS client and relay-server, DynDNS
Management
Web-based GUI; Trinity WEB Wizard
Industry standard CLI with remote Telnet and SSH access, fully documented
HTTP web management and firmware loading
TFTP configuration & firmware loading
HTTPS configuration & firmware provisioning
SNMP v3 agent (MIB II and private MIB)
Built-in diagnostic tools (trace, debug)
Secure Auto-provisioning
System
Dual Core CPU Broadcom BCM53012 operating at 1GHz
Memory:
• 256 Mbytes DRAM
• 32 Mbytes Flash
Physical
Dimensions: 8.2 x 1.3H x 6.5D inch (20.8W X 3.4H x 16.5D cm)
Weight: <15.9 oz. (<450g)
Power Consumption: <10W
Operating Temperature: 32-104°F (0-40°C)
Operating humidity: up to 90%, non condensing
IP Services
41
Appendix C Cabling
Chapter contents
Introduction ..........................................................................................................................................................43
Serial Console........................................................................................................................................................43
Ethernet ................................................................................................................................................................44
ISDN PRI (E1/T1) ...............................................................................................................................................45
42
SmartNode 5570 User Manual
C • Cabling
Introduction
This section provides information on the cables used to connect the SmartNode to the existing network infrastructure and to third party products.
Serial Console
The SmartNode can be connected to a serial terminal over its serial console port, as depicted in figure 9.
CAUTION
CAUTION
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and
mechanical serviceabilty.
For the ISDN connection to a carrier network, it shall be connected to a network termination device and not connected
directly to an outside POTS line.
1
I 0/
PR
0
I 0/
PR
1
H 0/
ET
0
H 0/
ET
B
US
et
Res
1A
V,
12
le
so
Con
Serial Terminal
Note A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each SmartNode Series device
Figure 9. Connecting a serial terminal
Console Connection settings:
• 19200 Bps
• 8bits, no parity
• 1stop bit
• flow control off
Note
Introduction
See section “Console port” on page 48 for console port pin-outs.
43
SmartNode 5570 User Manual
C • Cabling
Ethernet
Ethernet devices (10/100/1000 Base-T) are connected to the SmartNode over a cable with RJ-45 plugs. All
Ethernet ports on the SN5570 are Auto-MDX. Use any straight or crossover cable to a host, hubs, switches,
PCs or other devices.
The interconnecting cables shall be acceptable for external use
an shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
For the ISDN connection to a carrier network, it shall be connected to a network termination device and not connected
directly to an outside POTS line.
CAUTION
Note
Connecting both ethernet ports to the same switch will only work if the
switch has separate ARP table for each connection.
Res
et
12
V,
1A
Co
nso
le
US
B
ET
H0
/1
ET
H0
/0
Switch or Hub
PR
I0
/0
PR
I0
/1
Straight-through cable
RJ-45, male
RJ-45, male
1
1
2
2
3
3
6
6
Note: Other pins are not used
Figure 10. Typical Ethernet straight-through cable diagram for 10/100Base-T
RJ-45, male
RJ-45, male
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
Figure 11. Typical Ethernet straight-through cable diagram for 1000Base-T
Ethernet
44
SmartNode 5570 User Manual
C • Cabling
ISDN PRI (E1/T1)
The E1/T1 PRI port 0/1 is usually connected to a PBX or switch—local exchange (LE). Type and pin outs of
these devices vary depending on the manufacturer. In most cases, a straight-through RJ-45 to RJ-45 can be
used to connect the PRI port 0/1 with a PBX.
The E1/T1 PRI port 0/0 is usually connected to a PSTN NT. In most cases, a straight-through RJ-45 to RJ-45
can be used to connect.
Note
Note: Port 0/1 uses a different pin-out than port 0/0. This avoids the usage
of a PRI cross-over cable when connecting the PBX to port 0/1 and the
PSTN NT to port 0/0.
In case both ports have to be connected to a PBX, one port requires a PRI cross-over cable. The same applies
when connecting both ports to the PSTN.
The pin-out of a cross-over cable is illustrated in figure 13 on page 46.
CAUTION
CAUTION
ISDN PRI (E1/T1)
Hazardous network voltages are present in the PRI cables. If
you detach the cable, detach the end away from the SmartNode or interface card first to avoid possible electric shock. Network hazardous voltages may be present on the device in the
area of the PRI port, regardless of when power is turned OFF.
To prevent damage to the system, make certain you connect
the PRI cable to the PRI port only and not to any other RJ-45
socket.
45
SmartNode 5570 User Manual
C • Cabling
PSTN
NT
Re
se
12
V,
t
1A
Co
ns
ole
US
B
ET
H0
/1
ET
H0
/0
PR
I0
/0
PR
I0
/1
PRI PBX
SmartNode
Port 0/0
SmartNode
Port 0/1
1
1 RX Tip
2
3
4
5
6
7
8
2
3
4
5
6
7
8
TX Tip
TX Ring
N/C
RX Tip
RX Ring
N/C
N/C
PSTN NT
TX Tip
TX Ring
N/C
RX Tip
RX Ring
N/C
N/C
*N/C = No connection*
RX Ring
N/C
TX Tip
TX Ring
N/C
N/C
N/C
PBX
1
1 RX Tip
2
3
4
5
6
7
8
2
3
4
5
6
7
8
RX Ring
N/C
TX Tip
TX Ring
N/C
N/C
N/C
*N/C = No connection*
Figure 12. PRI E1/T1 Cabling
In case both ports will be connected to a PBX or to the PSTN, one port requires a PRI cross-over cable.
• Both ports connected to PSTN: Port 0/1 requires a PRI cross-over cable
• Both ports connected to PBX: Port 0/0 requires a PRI cross-over cable
Figure 13. PRI E1/T1 cross-over cable
ISDN PRI (E1/T1)
46
Appendix D Port pin-outs
Chapter contents
Introduction ..........................................................................................................................................................48
Console port..........................................................................................................................................................48
Ethernet ...............................................................................................................................................................48
ISDN PRI (E1/T1) Port Pin-outs..........................................................................................................................49
47
SmartNode 5570 User Manual
D • Port pin-outs
Introduction
This section provides pin-out information for the ports of the SmartNode.
Console port
(N/C)
(N/C)
(N/C)
DSR
Pins 1 & 3 are
connected together
Figure 14. EIA-561 (RJ-45 8-pin) port
Note
N/C means no internal electrical connection.
Console Connection Settings:
• 19200bps
• 8 bits, no parity
• 1 stop bit
• flow controls off
Ethernet
Table 7. 10/100 Base-T RJ-45 socket
Note
Introduction
Pin
Signal
1
TX+
2
TX-
3
RX+
6
RX-
Pins not listed are not used.
48
SmartNode 5570 User Manual
D • Port pin-outs
Table 8. 1000Base-T RJ-45 Socket
Pin
Signal
1
TRD0+
2
TRD0-
3
TRD1+
4
TRD1-
5
TRD2+
6
TRD2-
7
TRD3+
8
TRD3-
ISDN PRI (E1/T1) Port Pin-outs
Table 9. Port 0/0
Pin
Signal
1
RX_TIP
2
RX_RING
3
NC
4
TX_TIP
5
TX_RING
6
NC
7
NC
8
NC
Table 10. Port 0/1
Pin
Signal
1
TX_TIP
2
TX_RING
3
NC
4
RX_TIP
5
RX_RING
6
NC
7
NC
8
NC
Note
Pins not listed are not used
Note
All pins between the port PRI 0/0 and the port PRI 0/1 are connected
during power failure. Fallback relay operation (depending on Model. Only
for Models with /R in Product code)
ISDN PRI (E1/T1) Port Pin-outs
49
Appendix E SmartNode 5570 Factory
Configuration
Chapter contents
Introduction ..........................................................................................................................................................51
50
SmartNode 5570 User Manual
E • SmartNode 5570 Factory Configuration
Introduction
The factory configuration settings for SmartNode 5570 series can be obtained with the following command
through the CLI;
login: admin
password: <Enter>
192.168.1.1>show config:shipping-config
Please see Chapter 4, "Initial Configuration" on page 27 for more details about IP address settings for initial
configuration.
Introduction
51
Appendix F End User License Agreement
Chapter contents
End User License Agreement .................................................................................................................................53
1. Definitions ..................................................................................................................................................53
2. Title ............................................................................................................................................................53
3. Term ...........................................................................................................................................................53
4. Grant of License ..........................................................................................................................................53
5. Warranty ....................................................................................................................................................53
6. Termination ................................................................................................................................................54
7. Other Licenses ............................................................................................................................................54
52
SmartNode 5570 User Manual
F • End User License Agreement
End User License Agreement
By operating this package, operating the Designated Equipment or downloading the Programs electronically,
the End User agrees to the following conditions:
1. Definitions
A)
Effective Date shall mean the earliest date of purchase or download of a product containing the Patton
Electronics Company Program(s) or the Program(s) themselves.
B)
Program(s) shall mean all software, software documentation, source code, object code, or executable
code.
C)
End User shall mean the person or organization which has valid title to the Designated Equipment.
D)
Designated Equipment shall mean the hardware on which the Program(s) have been designed and provided to operate by Patton Electronics Company.
2. Title
Title to the Program(s), all copies of the Program(s), all patent rights, copyrights, trade secrets and proprietary
information in the Program(s), worldwide, remains with Patton Electronics Company or its licensors.
3. Term
The term of this Agreement is from the Effective Date until title of the Designated Equipment is transferred by
End User or unless the license is terminated earlier as defined in section, “6. Termination” on page 54.
4. Grant of License
A)
During the term of this Agreement, Paton Electronics Company grants a personal, non-transferable,
non-assignable, and non- exclusive license to the End User to use the Program(s) only with the designated Equipment at a site owned or leases by the End User.
B)
The End User may copy licensed Program(s) as necessary for backup purposes only for use with the designated Equipment that was first purchased or used, or its temporary or permanent replacement.
C)
The End User is prohibited from disassembling; decompiling, reverse-engineering or otherwise attempting to discover or disclose the Program(s), source code, methods, or concepts embodies in the Program(s) or having the same done by another party.
D)
Should End User transfer title of the Designated Equipment to a third party after entering into this
license agreement, End User is obligated to inform the third party in writing that a separate End user
License Agreement from Patton Electronics Company is required to operate the Designated Equipment.
5. Warranty
The Program(s) are provided as is without warranty of any kind. Patton Electronics Company and its licensors
disclaim all warranties, either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non-infringement. In no event shall Patton Electronics Company or its licensors be liable for any damages whatsoever (including, without limitation, damages for loss of
business profits, business interruption, loss of business information, or other pecuniary loss) arising out of the
use of in inability to use the Program(s), even if Patton Electronics Company has been advised of the possibility
of such damages. Because some states do not allow the exclusion or limitation of liability for consequential or
incidental damages, the above limitation may not apply to you.
End User License Agreement
53
SmartNode 5570 User Manual
F • End User License Agreement
If the Program(s) are acquired by or on behalf of a unit or agency of the United States Government, the Government agrees that such Program(s) are commercial computer software or computer software documentation
and that, absent a written agreement to the contrary, the Government’s rights with respect to such Program(s)
are limited by the terms o this Agreement, pursuant to Federal Acquisition Regulations 12.212(a) and/or
DEARS 227.7202-1(a) and/or sub-paragraphs (a) through (d) of the “Commercial Computer SoftwareRestricted Rights” clause at 48 C.F.R. 52.227-19 of the Federal Acquisition Regulations as applicable.
6. Termination
A)
The End user may terminate this agreement by returning the Designated Equipment and destroying all
copies of the licensed Program(s).
B)
Patton Electronics Company may terminate this Agreement should End User violate any of the provisions of section, “4. Grant of License” on page 53.
C)
Upon termination for A or B above or the end of the Term, End User is require to destroy all copies of
the licensed Program(s).
7. Other Licenses
The Program may be subject to licenses extended by third parties. Accordingly, Patton Electronics Company
licenses the Programs subject to the terms and conditions dictated by third parties. Third party software identifies to the Programs includes:
• A routing license is included at no charge. As well as the SIP-TLS and SRTP license.
• ISDN QSIG support will require the purchase of an additional license.
• The LGPL (Lesser General Public License) open source license distributed to you pursuant to the LGPL
license terms (http://www.gnu.org/licenses/lgpl.html).
• U-Boot (Red Hat Embedded Debug and Bootstrap) embedded system debug/bootstrap environment from
Red Hat distributed to you pursuant to the eCos license terms 
(http://ecos.sourceware.org/license-overview.html) and GNU General Public License (GPL) terms
(http://www.gnu.org/copyleft/gpl.html). Source code is available upon request.
End User License Agreement
54
Download PDF
Similar pages