Hot Swap SATA/SAS Backplane RAID Bays – 3 Hard Drive

Hot Swap SATA/SAS Backplane RAID Bays – 3 Hard
Drive Mobile Rack
Product ID: SATSASBAY3BK
The SATSASBAY3BK SAS/SATA Backplane offers an easy-to-use and cost-effective SATA hot swap
solution and features a sturdy and compact 3-in-2 design that lets you install up to three 2.5"/3.5" SATA
or SAS hard drives into only two 5.25in bays.
With support for SATA/SAS HDD the mobile rack/backplane is fully compatible with RAID installations to
ensure maximum performance and versatility for enhanced storage applications.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD
Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
The SATSASBAY3BK is backed by a StarTech.com 2-year warranty and free lifetime technical support.
www.startech.com
1 800 265 1844
Certifications, Reports
and Compatibility
Applications
•
•
Add additional hot-swap bays to a server or workstation computer
Replace or upgrade old IDE or SATA backplanes with a SAS/SATA
backplane
•
Backup systems where physically removing the backed up data from
the system is required
Be able to replace/remove individual drives from a storage array with
minimal or no system down time
•
Features
•
•
•
•
•
•
•
•
•
•
Fully supports SAS revision 1/2 (3.0/6.0 Gbps) hard drives and
controllers
Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps)
Supports 2.5" and 3.5" form factor SAS or SATA hard drives
Easy to use and lockable removable drive trays
Audible temperature warning buzzer for 55°C, 60°C, or 65°C
Flammability rating of UL 94 V-0
Independent power switches for each drive
LED status indicators for each drive
Sturdy aluminum and steel construction
80mm rear mounted, ball-bearing cooling fan
•
•
•
High/Low fan speed controls
Fan sensor reset switch
Plug-and-Play and Hot-Swap compatible
www.startech.com
1 800 265 1844
Hardware
Performance
Connector(s)
Warranty
2 Years
Compatible Drive Types (Type and
Rate)
SAS & SATA
Drive Size
2.5in & 3.5in
Fans
1 - 80 mm
Number of Drives
3
Regulatory Approvals
UL94 V-0 Rated
Hot Swap Capability
Yes
Temperature Alarm
Yes
Drive Connectors
3 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors
1 - SATA (7 pin, Data) Plug
2 - LP4 (4 pin, Molex Large Drive Power) Male
2 - SATA Data & Power Combo (7+15 pin) Plug
Special Notes /
Requirements
Note
If using SFF-8484 SAS controller for SAS Hard Drives, use
StarTech.com SAS cable SAS84S450
System and Cable Requirements
Two free 5.25" drive bays
3 x Available SAS or SATA ports
Indicators
LED Indicators
1 - Over Heating Alarm (Flashing Red - Temperature
Warring, Reset sensor and alarm)
3 - Hard Drive Indicator (Green - Power, Orange/Red
Blinking - Activity)
Environmental
Physical
Characteristics
Humidity
90% RH at 30°C
Operating Temperature
0°C to 50°C (32°F to 122°F)
Storage Temperature
-15°C to 75°C (-59°F to 167°F)
Color
Black
Enclosure Type
Aluminum and Steel
Plastic
Packaging
Information
Product Height
3.4 in [86 mm]
Product Length
8 in [202 mm]
Product Weight
2.7 lb [1.2 kg]
Product Width
5.7 in [146 mm]
Shipping (Package) Weight
3.2 lb [1.4 kg]
www.startech.com
1 800 265 1844
What's in the Box
Included in Package
1 - SAS/SATA Backplane
3 - SATA cables
1 - Package of assemble screws
1 - Instruction Manual
Product appearance and specifications are subject to change without notice.
www.startech.com
1 800 265 1844
Download PDF
Similar pages