Power Supply / Peripherals
Peripherals - Industrial Flash Module
w w w.ieiworld.com
Industrial SATADOM Series
■ The world’s smallest high-speed SATADOM
The revolutionary form factor of SATADOM has been widely adopted by industrial and embedded system makers across the
globe. With in-house designed SATA 6Gb/s controller, the SATADOM provides you not only the fastest read/write speed but
also stable data transfer. Moreover, to address customer’s challenging requirements, we have released a series of the smallest
SATADOM which fits various kinds of compact systems. Here, we recommend five models by different heights. For the
low-profile 1U system use, you can choose SL 3SE, SH 3SE, and SH 3ME.
■ SATA 6Gb/s Solutions
Powerful Performance
SATA 6Gb/s devices have 191% higher performance than SATA 3Gb/s devices.
Less Power Consumption
The advanced idle mode helps to save up to 35% of energy when system stays in idle, therefore the battery runtime increases
and the system requests less power consumption than SATA 3Gb/s.
Greater Reliability
The in-house designed SATA 6Gb/s controller offers an excellent signal quality during data transfer, enhancing the system
compatibility and stability.
Easier Use
Along with upgrading to SATA 6Gb/s, the one-touch activation mode of iSMART 3.2 can save hours of setup and maintenance
time.
Model Name
IFM-3010V
IFM-3320M
IFM-3010L
IFM-3010H
IFM-3020-HM
Picture
1. Vertical version
2. Anti-vibration mechanical
design
1. Vertical version
2. Writing protection
3. Anti-vibration mechanical
design
Key Features
Interface
Flash Type
Capacity (GB)
1. SATA 6Gb/s interface
2. iSMART disk health
monitoring
3. Intelligent error recovery
system
4. Excellent data transfer
speed
5. Zero mechanical
interference
6. Anti-vibration mechanical
design
1. Horizontal version
2. Only exposes 12mm height
on the motherboard after
installation
1. Low profile horizontal design
2. High IOPS
SATA 6Gb/s
SATA 6Gb/s
SATA 6Gb/s
SATA 6Gb/s
SATA 6Gb/s
SLC
MLC
SLC
SLC
MLC
1GB~32GB
8GB~128GB
1GB~32GB
1GB~32GB
8GB~128GB
Sequential R/W
300/130
355/135
300/130
300/130
200/75
Max. Power
Consumpation
0.65W (5V x 130mA)
1W (5V x 200mA)
0.65A (5V x 130mA )
0.65W (5V x 130mA)
1.8W (5V x 370mA)
Wide temperature model only
Wide temperature model only
Wide temperature model only
Wide temperature model only
Wide temperature model only
ATA Security
Yes
Yes
Yes
Yes
Yes
S.M.A.R.T
Yes
Yes
Yes
Yes
Yes
20.9 x 39.5 x 7.9
25.3 x 41.5 x 6.8
32.5 x 29.5 x 8.0
18.1 x 30.5 x 12
18.0 x 30.3 x12.5
Thermal Sensor
Dimensions (mm)
Environment
Vibration: 20G@7~2000Hz, Shock: 1500G@0.5ms, Storage Temperature: -55°C ~ +95°C, MTBF: >3 million hours
Standard
(0°C~+70°C)
IFM-3010IS-1GB
IFM-3010IS-2GB
IFM-3010IS-4GB
IFM-3010IS-8GB
IFM-3010IS-16GB
IFM-3010IS-32GB
IFM-3320IM-8GB-R20
IFM-3320IM-16GB-R20
IFM-3320IM-32GB-R20
IFM-3320IM-64GB-R20
IFM-3320IM-128GB-R20
IFM-3010IL-1GB
IFM-3010IL-2GB
IFM-3010IL-4GB
IFM-3010IL-8GB
IFM-3010IL-16GB
IFM-3010IL-32GB
IFM-3010IPS-1GB
IFM-3010IPS-2GB
IFM-3010IPS-4GB
IFM-3010IPS-8GB
IFM-3010IPS-16GB
IFM-3010IPS-32GB
IFM-3020IPSM-8GB-R20
IFM-3020IPSM-16GB-R20
IFM-3020IPSM-32GB-R20
IFM-3020IPSM-64GB-R20
IFM-3020IPSM-128GB-R20
Wide
Temperature
(-40°C~+85°C)
IFM-3010WS-1GB
IFM-3010WS-2GB
IFM-3010WS-4GB
IFM-3010WS-8GB
IFM-3010WS-16GB
IFM-3010WS-32GB
IFM-3320WM-8GB-R20
IFM-3320WM-16GB-R20
IFM-3320WM-32GB-R20
IFM-3320WM-64GB-R20
IFM-3320WM-128GB-R20
IFM-3010WL-1GB
IFM-3010WL-2GB
IFM-3010WL-4GB
IFM-3010WL-8GB
IFM-3010WL-16GB
IFM-3010WL-32GB
IFM-3010WPS-1GB
IFM-3010WPS-2GB
IFM-3010WPS-4GB
IFM-3010WPS-8GB
IFM-3010WPS-16GB
IFM-3010WPS-32GB
IFM-3020WPSM-8GB-R20
IFM-3020WPSM-16GB-R20
IFM-3020WPSM-32GB-R20
IFM-3020WPSM-64GB-R20
IFM-3020WPSM-128GB-R20
P/N
Flash Module-2016-V10
Power Supply / Peripherals
Peripherals - Industrial Flash Module
w w w.ieiworld.com
Industrial SSD Series
■ Breakthrough Technology of IFD-2530ISM & IFD-2530ISMD
With the release of the brand-new designed firmware algorithm, IFD-2530ISM and IFD-2530ISMD offer outstanding read and
write performance and extended lifespan, and are compliant with the JEDEC 219 specifications. In addition, with the iData
Guard Technology, IFD-2530ISM and IFD-2530ISMD support data integrity in the event of abnormal power failure. The wide
operating temperature ranges from -40 °C to 85 °C.
Features of IFD-2530ISM & IFD-2530ISMD
IFD-2530ISM and IFD-2530ISMS provide a wide range demand of capacity. IFD-2530ISMD even supports large capacity up to 2TB.
IFD-2530ISM
DRAM-less Design

Price

IFD-2530ISMD

R: 31,000 IOPS/W: 40,000 IOPS (128GB)
Random Transfer Performance

R: 70,000 IOPS/W: 64,000 IOPS (128GB)
Easy to Design in Small Form Factors

Low Power Consumption


TRIM


Model Name
2.5” SATA 6Gb/s IFD-2520IS
2.5” SATA 6Gb/s IFD-2530ISMD
2.5” SATA 6Gb/s IFD-2530AM
Picture
Key Features
1. Intelligent error recovery system
2. Excellent data transfer speed
3. Enhanced power cycling management
Interface
1. EverGreen L2 architecture
2. 7mm height mechanical design
3. Excellent random performance
1. 7mm height mechanical design
2. Low power consumption
3. Budget-friendly MLC-based solution
SATA 6Gb/s
SATA 6Gb/s
SATA 6Gb/s
SLC
MLC
MLC
8GB~128GB
8GB~1TB
8GB~256GB
510/340
520/450
430/190
2.2W (5V x 450mA)
5W (5V x 1A)
1.7W (5V x 335 mA)
Wide temperature model only
Wide temperature model only
Wide temperature model only
ATA Security
Yes
Yes
Yes
S.M.A.R.T
Yes
Yes
Yes
69.8 x 100.1 x 9.3
70.0 x 100.0 x 6.8
69.8 x 100.1 x 7.0
Flash Type
Capacity (GB)
Sequential R/W
Max. Power
Consumption
Thermal Sensor
Dimensions (mm)
Environment
Standard
(0°C~+70°C)
P/N
Wide
Temperature
(-40°C~+85°C)
Vibration: 20G@7~2000Hz, Shock: 1500G@0.5ms, Storage Temperature: -55°C ~ +95°C, MTBF: >3 million hours
IFD-2520IS-8GB
IFD-2520IS-16GB
IFD-2520IS-32GB
IFD-2520IS-64GB
IFD-2520IS-128GB
IFD-2530ISMD-8GB-R10
IFD-2530ISMD-16GB-R10
IFD-2530ISMD-32GB-R10
IFD-2530ISMD-64GB-R10
IFD-2530ISMD-128GB-R10
IFD-2530ISMD-256GB-R10
IFD-2530ISMD-512GB-R10
IFD-2530ISMD-1TB-R10
IFD-2530AM-8GB-R20
IFD-2530AM-16GB-R20
IFD-2530AM-32GB-R20
IFD-2530AM-64GB-R20
IFD-2530AM-128GB-R20
IFD-2530AM-256GB-R20
IFD-2520WT-8GB
IFD-2520WT-16GB
IFD-2520WT-32GB
IFD-2520WT-64GB
IFD-2520WT-128GB
IFD-2530ISMD-8GB-R10
IFD-2530ISMD-16GB-R10
IFD-2530ISMD-32GB-R10
IFD-2530ISMD-64GB-R10
IFD-2530ISMD-128GB-R10
IFD-2530ISMD-256GB-R10
IFD-2530ISMD-512GB-R10
IFD-2530ISMD-1TB-R10
IFD-2530AWM-8GB-R20
IFD-2530AWM-16GB-R20
IFD-2530AWM-32GB-R20
IFD-2530AWM-64GB-R20
IFD-2530AWM-128GB-R20
IFD-2530AWM-256GB-R20
Flash Module-2016-V11
Power Supply / Peripherals
Peripherals - Industrial Flash Module
w w w.ieiworld.com
Industrial CFast & CF Card Series
■ Similar size, different read and write speeds
With a similar size, CFast is mainly different from CF card in its interface, connector, and most importantly, faster read and write
speeds. CFast, with SATA 6Gb/s interface and 7-pin plus 17-pin connector, offers data transfer rates of sequential reads up
to 470 MB/sec and of sequential writes up to 250 MB/sec. CF card, with PATA interface and 50-pin CF connector, offers data
transfer rates of sequential reads up to 100 MB/sec and of sequential writes up to 95 MB/sec.
■ ATA security for CF card
The optional ATA Security Mode feature set is a password system that restricts access to user data stored on a device. The
purpose is to prevent unauthorized access or a virus.
CFast 3SE: Pin Directions
Pin S3: RxPin S6: Tx+
Pin S2: Rx+
Pin S5: Tx-
Model Name
iCF9000: IDE Pin
ICT-2000 AS
ICT-2000 AM
ICF-9000
ICF-2000
ICF-1000
2GB~64GB
8GB~128GB
4GB~32GB
512MB~8GB
128MB~8GB
128MB~16GB
285/260 MB/sec
310/240 MB/sec
110/100 MB/sec
40/30 MB/sec
40/28 MB/sec
30/15 MB/sec
SLC
MLC
SLC
SLC
SLC
SLC
Yes
PIO mode 0-6
MwDMA mode 0-4
UltraDMA mode 0-7
PIO mode 0-4
MwDMA mode 0-4
UltraDMA mode 0-4
PIO mode 0-4
MwDMA mode 0-4
UltraDMA mode 0-4
PIO mode 0-6
MwDMA mode 0-4
UltraDMA mode 0-4
Picture
Capacity
Sequential R/W (Max.)
Flash Type
IDE Transfer Mode
Yes
Operating Temp.
0°C~+70°C (Standard)/-40°C~+85°C (Industrial)
Storage Temp.
Vibration/Shock
(7/2000Hz)/(0.5ms)
DC Power Input
Power Consumption
(Max.)
-40°C~+100°C
-55°C~+95°C
-40°C~+100°C
Vibration: 15 (G), 10~2000 (Hz)
Shock: 1,500 G, 0.5 ms
1500G/0.5ms
1500G/0.5ms
Supply voltage: 3.3V
ICF: +3.3V-+5V single power supply operation
Supply voltage: 3.3V & 5V
0.75W (5V x 125mA@210mA)
95 mA
42.8 x 36.4 x 3.3
42.8 x 36.4 x 3.3
390mA
Dimensions (mm)
525mA
42.8 x 36.4 x 3.6
ATA Security
Yes
Yes
Yes
Yes
Yes
S.M.A.R.T
Yes
Yes
Yes
Yes
Yes
STD
(0°C~+70°C)
P/N
WT
(-40°C~+85°C)
Yes
No
ICT-2000IA-2GB
ICT-2000IA-4GB
ICT-2000IA-8GB
ICT-2000IA-16GB
ICT-2000IA-32GB
ICT-2000IA-64GB
ICT-2000IAM-8GB
ICT-2000IAM-16GB
ICT-2000IAM-32GB
ICT-2000IAM-64GB
ICT-2000IAM-128GB
ICF-9000CD-4GB
ICF-9000CD-8GB
ICF-9000CD-16GB
ICF-9000CD-32GB
ICF-2000IPD-512MB
ICF-2000IPD-1GB
ICF-2000IPD-2GB
ICF-2000IPD-4GB
ICF-2000IPD-8GB
ICF-1000IPD-1GB-R20
ICF-1000IPD-2GB-R20
ICF-1000IPD-4GB-R20
ICF-1000IPD-8GB-R20
ICF-1000IA-128MB-R20
ICF-1000IA-256MB-R20
ICF-1000IA-512MB-R20
ICF-1000IA-1GB-R20
ICF-1000IA-2GB-R20
ICF-1000IA-4GB-R20
ICF-1000IA-8GB-R20
ICT-2000WA-2GB
ICT-2000WA-4GB
ICT-2000WA-8GB
ICT-2000WA-16GB
ICT-2000WA-32GB
ICT-2000WA-64GB
ICT-2000WAM-8GB
ICT-2000WAM-16GB
ICT-2000WAM-32GB
ICT-2000WAM-64GB
ICT-2000WAM128GB
ICF-9000WD-4GB
ICF-9000WD-8GB
ICF-9000WD-16GB
ICF-9000WD-32GB
ICF-2000WPD-512MB
ICF-2000WPD-1GB
ICF-2000WPD-2GB
ICF-2000WPD-4GB
ICF-2000WPD-8GB
ICF-1000WPD-1GB-R20
ICF-1000WPD-2GB-R20
ICF-1000WPD-4GB-R20
ICF-1000WPD-8GB-R20
ICF-1000WA-128MB-R20
ICF-1000WA-256MB-R20
ICF-1000WA-512MB-R20
ICF-1000WA-1GB-R20
ICF-1000WA-2GB-R20
ICF-1000WA-4GB-R20
ICF-1000WA-8GB-R20
Flash Module-2016-V10
Power Supply / Peripherals
Model Name
IPE-5300IM/WM
Peripherals - Industrial Flash Module
IPE-5320IM/WM
Picture
Key Features
1. Excellent data transfer
speed
2. High quality SLC-based
solution
1. Excellent data transfer
IPE-5320AM/AWM
IPE-5200IP/WP
w w w.ieiworld.com
IPE-5210IPM/WPM
Power Supply / Peripherals
Peripherals - Industrial Flash Module
w w w.ieiworld.com
M.2-SATA (NGFF)
M.2-SATA (NGFF) stands for Next Generation Form Factor, which is comprised of several interfaces, and interconnects with
the corresponding systems basing on the 67-pin edge card connectors. The Innodisk M.2-SATA (NGFF) offers wide range of
capacities in several standard form factors to fulfill different applications, including type 2242, type 2260, type 2280, and 22110.
■ Features
■ Benefits
• Adopted SATA 6Gb/s interface, complaint
• The small form factor of M.2 (S42) saves about 40%
with M.2 (NGFF) type 2242 and 2280
of PCB dimension, comparing to the Mini PCIe form factor
• Excellent data transfer speed in small form factor
• Innodisk's exclusive iData Guard ensures reliable data
• iCell technology for data protection
transfer in the event of an abnormal power failure
• Supports iSMART disk health monitoring
• Fully compliant with industrial standard
• Suitable for ultra-thin or compact system
From
onon
SSD
■M.2
M.2
formfactor
factorused
used
SSD
IM2SE-2242
Model Name
22
Picture
22
Top SIDE
COMPONENT
AREA
22
22
Top SIDE
COMPONENT
AREA
22
Top SIDE
COMPONENT
AREA
TYPE-2230-XX-E
30
Top SIDE
COMPONENT
AREA
Top SIDE
COMPONENT
AREA
110
80
1. Type 2242-D1-B-M
2. High IOPS with DRAM-less design
3. Budget-friendly MLC-based solution
Key Features
60
42
Interface
SATA 6Gb/s
Flash Type
TYPE-2242-XX-B-M
TYPE-2260-XX-M
TYPE-2280-XX-B-M
MLC
Capacity (GB)
TYPE-221100-XX-B-M
16GB~256GB
Sequential R/W
GENERAL TOLERANCE IS 0.15
500/80
Max. Power
Consumption
1.09W (3.3V x 330 mA)
Thermal Sensor
Standard: Yes, Wide Temperature: Yes
ATA Security
Yes
S.M.A.R.T
Yes
Dimensions (mm)
22 x .42 x 3.2
Vibration: 20G@7~2000Hz,
Shock: 1500G@0.5ms,
Storeage Temperature: -55°C ~ +95°C,
MTBF: >3 million hours
Environment
• Key A version is intended to support Wi-Fi+BT+NFC and/or
WiGig Combo solution
IM2SE-2242IM-16GB-R10
IM2SE-2242IM-32GB-R10
IM2SE-2242IM-64GB-R10
IM2SE-2242IM-128GB-R10
IM2SE-2242IM-256GB-R10
Standard
(0°C~+70°C)
• Key B is intended to support WWAN+GNSS, SSD and other
add-in solutions
P/N
• Key E is intended to support Wi-Fi+BT+NFC or GNSS solution
IM2SE-2242WM-16GB-R10
IM2SE-2242WM-32GB-R10
IM2SE-2242WM-64GB-R10
IM2SE-2242WM-128GB-R10
IM2SE-2242WM-256GB-R10
Wide
Temperature
(-40°C~+85°C)
• Key M is intended for SSD devices only
Intel® 2.5" SSD Solution
Key Features
Interface
Flash Type
Capacity (GB)
Sequential R/W
Environment
1. 7mm height mechanical design
2. Low power consumption
SATA 6Gb/s
MLC
60GB~480GB
540/490
Max. Power
Consumption
Thermal Sensor
165mw(5V*33mA)
0° C~70° C
ATA Security
Yes
S.M.A.R.T
Yes
Dimensions (mm)
70 x 100 x 7
Vibration: 2.17 G@5-700 Hz, Shock: 1500G@0.5ms, Storeage Temperature: 0° C~70° C, MTBF: ≥1.2 million hours
Flash Module-2016-V10
Power Supply / Peripherals
Peripherals - Industrial Flash Module
w w w.ieiworld.com
Ensuring the Best System Performance
DDR3 W/T & Commercial ECC Thermal Sensor Solution
DIMM
240-pin
SO-DIMM
204-pin
CAS Latency
CL11
DDR3 ECC SO-DIMM
DDR3 ECC 204-pin 1GB/WT
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
Ordering Informtion
DDR3 SO-DIMM W/T
DDR3 ECC Long-DIMM
DDR3 ECC 240-pin 2GB/WT
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
67.6mm
133.35mm
Description
31.75mm
1600 MHz
31.75mm
Module Speed
DDR3 DIMM W/T
Description
DDR3 1600 1GB ECC SO-DIMM CL11 128M*8
DDR3 1600 2GB DIMM CL11 256M*8
DDR3 1600 2GB ECC SO-DIMM CL11 256M*8
DDR3 1600 4GB DIMM CL11 256M*8
DDR3 1600 4GB ECC SO-DIMM CL11 256M*8
DDR3 1600 8GB DIMM CL11 256M*8
DDR3 1600 8GB ECC SO-DIMM CL11 256M*8
DDR3 1600 16GB DIMM CL11 256M*8
DDR3 W/T Solution
DIMM
240-pin
SO-DIMM
204-pin
CAS Latency
CL11
DDR3 SO-DIMM
DDR3 204-pin 1GB/WT
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
Ordering Information
DDR3 SO-DIMM W/T
DDR3 Long-DIMM
31.75mm
1600 MHz
31.75mm
Module Speed
DDR3 240-pin 2GB/WT
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
67.6mm
133.35mm
Description
DDR3 DIMM W/T
Description
DDR3 1600 1GB SO-DIMM, ProMOS, 128M*8
DDR3 1600 2GB DIMM, ProMOS, 128M*8
DDR3 1600 2GB SO-DIMM, ProMOS, 128M*8
DDR3 1600 2GB DIMM, Micron, 256M*8
79B00-G002-038-RS /79B00-G002-035-RS DDR3 1600 2GB SO-DIMM, Micron, 256M*8
DDR3 1600 4GB DIMM, Micron, 256M*8
79B00-G004-039-RS
DDR3 1600 4GB SO-DIMM, Micron, 256M*8
DDR3 1600 4GB DIMM, ProMOS, 512Mx8
DDR3 1600 4GB SO-DIMM, ProMOS, 512Mx8
DDR3 1600 8GB DIMM, ProMOS, 512M*8
DDR3 1600 8GB SO-DIMM, ProMOS, 512Mx8
DDR2 W/T Solution
DIMM
240-pin
SO-DIMM
200-pin
CAS Latency
CL6
Ordering Information
DDR2 SO-DIMM
DDR2 200-pin 1GB/WT
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
67.6mm
133.35mm
DDR2 DIMM W/T
DDR2 SO-DIMM W/T
Description
79900-G001-052-RS
DDR2 667 1GB SO-DIMM, ProMOS, 128M*8
79900-G002-027-RS
DDR2 DIMM (Low Profile)
18.8mm
800 MHz
31.75mm
Module Speed
Description
DDR2 800 1GB DIMM, ProMOS, 128M*8
DDR2 800 2GB DIMM, ProMOS, 128M*8
DDR2 800 1GB SO-DIMM, ProMOS, 128M*8
DDR SO-DIMM W/T
Description
DDR2 800 2GB SO-DIMM, ProMOS, 128M*8
79300-M512-088-RS
DDR400 1GB SO-DIMM, ProMOS, 64M*8
Flash Module-2016-V10
Power Supply / Peripherals
Peripherals - Industrial Flash Module
w w w.ieiworld.com
Lifespan Evaluation of Flash Products
From Endurance to iSMART
■ Endurance of different flash types - SLC and MLC
SLC is more reliable and has longer endurance than MLC.
MLC is cost-saving alternative to SLC to replace the traditional HDD.
■ iSMART, the proprietary disk health monitoring tool, provides easy access,
in-depth information for embedded applications
iSMART can monitor all our flash products in a system. It provides clear and easy to understand warnings, numbers, charts
and graphics to enable system integrators and users to check storage device health, performance, temperature, free space,
and status at a glance. Also, it can alert users with the remaining service lifetime of Innodisk drives, so that they can replace a
device in plenty of time to avoid any potential issues.
Besides providing critical disk information, iSMART also offers convenience through e-mail alerts and one-touch feature.
Additionally, iSMART provides dynamic power management, advancing green design goals for lower power consumption,
such as with a 35% of power saving in idle mode.
Disk Information
Performance / Alert
Lifespan Prediction
Wear Leveling Status
Flash Module-2016-V10
Download PDF
Similar pages