QuickSpecs
HPE 7500 Switch Series
Overview
HPE 7500 Switch Series
Product overview
The HPE 7500 Switch Series comprises modular, multilayer chassis switches that meet the evolving needs of integrated services
networks. The switches can be deployed in multiple network environments, including the enterprise LAN core, aggregation layer,
and wiring closet edge.
They offer 40GbE connectivity and cost-effective, wire-speed 10GbE ports to safeguard the throughput and bandwidth needed for
your mission-critical data and high-speed communications. A passive backplane, support for load sharing, and redundant
management and fabrics help the switch series provide high availability.
Moreover, these switches deliver wire-speed Layer 2 and Layer 3 routing services for the most demanding applications with
hardware-based IPv4 and IPv6 support.
Models
HPE FlexNetwork 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7510 Switch Chassis
HPE FlexNetwork 7506 Switch Chassis
HPE FlexNetwork 7503 Switch Chassis
HPE FlexNetwork 7502 Switch Chassis
JH333A
JH332A
JH331A
JD238C
JD239C
JD240C
JD242C
Key features
•
•
•
Versatile, high-performance modular switches
Enterprise LAN core, aggregation, and edge
Extensive switching and routing, IPv6, and multiprotocol label switching (MPLS)
Page 1
QuickSpecs
HPE 7500 Switch Series
Overview
•
•
Advanced functionality with service modules
Robust network and service virtualization
Features and benefits
Quality of Service (QoS)
•
•
•
•
•
•
IEEE 802.1p prioritization
delivers data to devices based on the priority and type of traffic
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number,
source port, and DiffServ
Bandwidth shaping
o Port-based rate limiting
provides per-port ingress-/egress-enforced increased bandwidth
o Classifier-based rate limiting
uses an access control list (ACL) to enforce increased bandwidth
for ingress traffic on each port
o Reduced bandwidth
provides per-port, per-queue egress-based reduced bandwidth
Weighted random early detection (WRED)/random early detection (RED)
delivers congestion avoidance capabilities through the use of queue management algorithms
Powerful QoS feature
supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing
(WFQ), and WRED
Traffic policing
supports Committed Access Rate (CAR) and line rate
Intrusion detection/prevention system (IDS/IPS)
•
•
•
•
•
Deep packet inspection
module supports deep packet inspection and examines the packet payload as well as the frame and packet headers;
packets are dropped if attacks or intrusions are detected using signature-based or protocol anomaly-based detection
Signature-based detection
detects attacks that have known attack patterns; IPS maintains a signature database that contains the pattern definitions
for known attacks that can be updated automatically using a subscription service
Protocol anomaly-based detection
detects attacks that use anomalies in application protocol payloads
Severity-based action policies
involve action taken against attacks based on their severity; available actions are "allow," "block," and "terminate
connection" to provide appropriate mitigation
Signature update service
provides regular updates to the signature database, helping to ensure that the latest available signatures are installed
Virtual private network (VPN)
•
IPSec
provides secure tunneling over an untrusted network such as the Internet or a wireless network; offers data confidentiality,
Page 2
QuickSpecs
HPE 7500 Switch Series
Overview
•
•
•
authenticity, and integrity between two network endpoints
Generic Routing Encapsulation (GRE)
transports Layer 2 connectivity over a Layer 3 path in a secured way; enables the segregation of traffic from site to site
Manual or automatic Internet Key Exchange (IKE)
provides both manual or automatic key exchange required for the algorithms used in encryption or authentication; autoIKE allows automated management of the public key exchange, providing the highest levels of encryption
Virtual Extensible LAN (VXLAN)
delivers network virtualization, enabling IP-based networks to support many VLAN overlays for use as a private
collaboration network, or a single, end-to-end VLAN for WiFi. Requires Comware v7 with specific hardware only. Refer to
the hardware manuals for details.
Management
•
•
•
•
•
•
•
•
•
•
•
•
Management interface control
provides management access through a modem port and terminal interface, as well as in-band and out-of-band Ethernet
ports; provides access through terminal interface, Telnet, or secure shell (SSH)
Industry-standard CLI with a hierarchical structure
reduces training time and expenses, and increases productivity in multivendor installations
Management security
restricts access to critical configuration commands; offers multiple privilege levels with password protection; ACLs provide
Telnet and SNMP access; local and remote syslog capabilities allow logging of all access
SNMPv1, v2, and v3
provide complete support of SNMP; provide full support of industry-standard Management Information Base (MIB) plus
private extensions; SNMPv3 supports increased security using encryption
sFlow (RFC 3176)
provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this
allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and
real-time network monitoring purposes
Remote monitoring (RMON)
uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a
private alarm extension group
FTP, TFTP, and SFTP support
offers different mechanisms for configuration updates; FTP allows bidirectional transfers over a TCP/IP network; trivial
FTP (TFTP) is a simpler method using User Datagram Protocol (UDP); Secure File Transfer Protocol (SFTP) runs over an
SSH tunnel to provide additional security
Debug and sampler utility
supports ping and traceroute for both IPv4 and IPv6
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clockdependent devices within the network so that the devices can provide diverse applications based on the consistent time
Network Quality Analyzer (NQA)
analyzes network performance and service quality by sending test packets, and provides network performance and service
quality parameters such as jitter, TCP, or FTP connection delays and file transfer rates; allows a network manager to
determine overall network performance and to diagnose and locate network congestion points or failures
Information center
provides a central repository for system and network information; aggregates all logs, traps, and debugging information
generated by the system and maintains them in order of severity; outputs the network information to multiple channels
based on user-defined rules
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Page 3
QuickSpecs
HPE 7500 Switch Series
Overview
•
•
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by
network management applications
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
Multiple configuration files
stores easily to the flash image
Connectivity
•
•
•
•
•
•
•
•
•
•
•
High-density port connectivity
Provides up to 10 interface module slots and up to 40 40GbE ports, 84 10GbE ports, 480 Fiber Gigabit ports, or 480 PoEenabled ports per HPE 7500 Switch Series system
Jumbo frames
Allow high-performance remote backup and disaster-recovery systems with up to 9,216 bytes
Loopback
supports internal loopback testing for maintenance purposes and an increase in availability; loopback detection protects
against incorrect cabling or network configurations and can be enabled on a per-port or per-VLAN basis for added
flexibility
Ethernet operations, administration and maintenance (OAM)
detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status
of the link between two devices
Flexible port selection
Includes 100/1000BASE-X auto speed selection, 10/100/1000BASE-T auto speed detection, as well as auto duplex and
MDI/MDI-X
Monitor link
collects statistics on performance and errors on physical links, increasing system availability
IEEE 802.3af Power over Ethernet (PoE)
provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points,
and security cameras
Dual-personality functionality
includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, and -LH, or 100-FX
Packet storm protection
protects against unknown broadcast, unknown multicast, or unicast storms with user-defined thresholds
Flow control
provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
IEEE 802.3at Power over Ethernet (PoE+) support
provides up to 30 watts of power at the power sourcing equipment (PSE)
Performance
•
•
•
High-speed fully distributed architecture
Supports a maximum of 1,152 Gb/s switching capacity with a 2.4 Tb/s backplane, providing enhanced performance and
future expansion capability; delivers up to 714 Mp/s throughput with dual fabrics; performs all switching and routing
functions in the I/O modules; and meets the current and future demand of an enterprise's bandwidth-intensive
applications
Scalable system design
Provides investment protection to support future technologies and higher-speed connectivity with a backplane designed
to accommodate bandwidth increases
Flexible chassis selection
Page 4
QuickSpecs
HPE 7500 Switch Series
Overview
Enables you to tailor your product selections to your budget with a choice of six chassis, ranging from a 10-slot to a 2-slot
chassis
Resiliency and high availability
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Redundant/load-sharing fabrics, management, fan assemblies, and power supplies
increase total performance and power availability while providing hitless, stateful failover
All hot-swappable modules
Allows replacement of modules without any impact on other modules
Dual internal power supply
provides high reliability
Separate data and control paths
separates control from services and keeps service processing isolated; increases security and performance
Passive design system
delivers increased system reliability as the backplane has no active components
IEEE 802.3ad link-aggregation control protocol (LACP)
Supports up to 128 trunks, each with 8 links per trunk; and provides support for static or dynamic groups and a userselectable hashing algorithm
Intelligent Resilient Fabric (IRF)
creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches
do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using
standard LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like
Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation
IRF capability
provides single IP address management for a resilient virtual switching fabric of up to four switches
Ring resiliency protection protocol (RRPP)
Provides standard sub-100 ms recovery for a ring Ethernet-based topology
Virtual Router Redundancy Protocol (VRRP)
allows a group of routers to dynamically back each other up to create highly available routed environments
Graceful restart
supports graceful restart for OSPF, IS-IS, BGP, LDP, and RSVP; the network remains stable during the active-standby
switchover; after the switchover, the device quickly learns the network routes by communicating with adjacent routers;
forwarding remains uninterrupted during the switchover to achieve nonstop forwarding (NSF)
Ultrafast protocol convergence with standards-based failure detection—bidirectional forwarding detection
Enables link connectivity monitoring and reduces network convergence time for the routing information protocol (RIP),
OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Smart link
allows 50 ms failover between links
IP/LDP FRR
nodes are configured with backup ports, routes, and LSPs; local implementation requires no cooperation of adjacent
devices, simplifying the deployment; solves the traditional convergence faults in IP forwarding and MPLS forwarding,
protecting the links, nodes, and paths without establishing respective backup LSPs for them; realizes restoration within 50
ms, with the restoration time independent of the number of routes and fast link switchovers, without route convergence
In-Service Software Upgrade (ISSU)
applies patches and new service features to be installed without restarting the system, increasing network uptime and
simplifying maintenance. Requires use of IRF, and R7169P01 or later releases.
Layer 2 switching
Page 5
QuickSpecs
HPE 7500 Switch Series
Overview
•
•
•
•
•
•
•
•
•
•
•
VLAN
Supports up to 4,096 port-based or IEEE 802.1Q-based VLANs; and supports MAC-based VLANs, protocol-based VLANs,
and
IP-subnet-based VLANs for added flexibility
Port isolation
increases security by isolating ports within a VLAN while still allowing them to communicate with other VLANs
Bridge Protocol Data Unit (BPDU) tunneling
transmits Spanning Tree Protocol BPDUs transparently, allowing correct tree calculations across service providers, WANs,
or MANs
GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
Port mirroring
Duplicates port traffic (ingress and egress) to a local or remote monitoring port; and supports four mirroring groups, with
an unlimited number of ports per group
Spanning Tree Protocol (STP)
supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE
802.1s Multiple Spanning Tree Protocol (MSTP)
Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping
controls and manages the flooding of multicast packets in a Layer 2 network
Device Link Detection Protocol (DLDP)
monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STPbased networks
IEEE 802.1ad QinQ and selective QinQ
increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a highspeed campus or metro network
Super VLAN
Saves IP address space, using RFC 3069 standard (also called VLAN aggregation)
Per-VLAN Spanning Tree Plus (PVST+)
allows each VLAN to build a separate spanning tree to improve link bandwidth usage in network environments with
multiple VLANs
Layer 3 services
•
•
•
•
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection
of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a
Layer 2 etwork
User Datagram Protocol (UDP) helper
redirects UDP broadcasts to specific IP subnets to prevent server spoofing
Dynamic Host Configuration Protocol (DHCP)
simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation
across subnets
Domain Name System (DNS)
provides a distributed database that translates domain names and IP addresses, which simplifies network design; supports
client and server
Layer 3 routing
•
Static IPv4 routing
Page 6
QuickSpecs
HPE 7500 Switch Series
Overview
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
provides simple manually configured IPv4 routing
Routing Information Protocol (RIP)
uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes
loop protection
Open shortest path first (OSPF)
delivers faster convergence; uses this link-state routing Interior Gateway Protocol (IGP), which supports ECMP, NSSA, and
MD5 authentication for increased security and graceful restart for faster failure recovery
Intermediate system to intermediate system (IS-IS)
uses a path vector Interior Gateway Protocol (IGP), which is defined by the ISO organization for IS-IS routing and extended
by IETF RFC 1195 to operate in both TCP/IP and the OSI reference model (Integrated IS-IS)
Border Gateway Protocol 4 (BGP-4)
delivers an implementation of the Exterior Gateway Protocol (EGP) utilizing path vectors; uses TCP for enhanced
reliability for the route discovery process; reduces bandwidth consumption by advertising only incremental updates;
supports extensive policies for increased flexibility; scales to very large networks
Policy-based routing
makes routing decisions based on policies set by the network administrator
IP performance optimization
Provides a set of tools to improve the performance of IPv4 networks; and includes directed broadcasts, customization of
TCP parameters, support of ICNP error packets, and extensive display capabilities
Unicast Reverse Path Forwarding (uRPF)
limits erroneous or malicious traffic in accordance with RFC 3074
Static IPv6 routing
provides simple manually configured IPv6 routing
Dual IP stack
maintains separate stacks for IPv4 and IPv6 to ease the transition from an IPv4-only network to an IPv6-only network
design
Routing Information Protocol next generation (RIPng)
extends RIPv2 to support IPv6 addressing
OSPFv3
provides OSPF support for IPv6
IS-IS for IPv6
extends IS-IS to support IPv6 addressing
BGP+
extends BGP-4 to support Multiprotocol BGP (MBGP), including support for IPv6 addressing
IPv6 tunneling
allows IPv6 packets to traverse IPv4-only networks by encapsulating the IPv6 packet into a standard IPv4 packet;
supports manually configured, 6to4, and Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnels; is an
important element for the transition from IPv4 to IPv6
Multiprotocol Label Switching (MPLS)
uses BGP to advertise routes across Label Switched Paths (LSPs), but uses simple labels to forward packets from any
Layer 2 or Layer 3 protocol, which reduces complexity and increases performance; supports graceful restart for reduced
failure impact; supports LSP tunneling and multilevel stacks
Multiprotocol Label Switching (MPLS) Layer 3 VPN
allows Layer 3 VPNs across a provider network; uses MP-BGP to establish private routes for increased security; supports
RFC 2547bis multiple autonomous system VPNs for added flexibility
Multiprotocol Label Switching (MPLS) Layer 2 VPN
establishes simple Layer 2 point-to-point VPNs across a provider network using only MPLS Label Distribution Protocol
(LDP); requires no routing and therefore decreases complexity, increases performance, and allows VPNs of non-routable
protocols; uses no routing information for increased security; supports Circuit Cross Connect (CCC), Static Virtual Circuits
Page 7
QuickSpecs
HPE 7500 Switch Series
Overview
•
•
(SVCs), Martini draft, and Kompella-draft technologies
Virtual Private LAN Service (VPLS)
establishes point-to-multipoint Layer 2 VPNs across a provider network
Service loopback
allows any module to take advantage of higher-featured modules, including OAA modules, by redirecting traffic; reduces
investment and enables higher bandwidth and load sharing; supports IPv6, IPv6
multicast, tunneling, and MPLS
Security
•
•
•
•
•
•
•
•
•
•
•
•
•
Access control list (ACL)
supports powerful ACLs for both IPv4 and IPv6; ACLs are used for filtering traffic to prevent unauthorized users from
accessing the network, or for controlling network traffic to save resources; rules can either deny or permit traffic to be
forwarded; rules can be based on a Layer 2 header or a Layer 3 protocol header; rules can be set to operate on specific
dates or times
Remote Authentication Dial-In User Service (RADIUS)
eases switch security access administration by using a password authentication server
Terminal Access Controller Access-Control System (TACACS+)
delivers an authentication tool using TCP with encryption of the full authentication request, providing additional security
Switch management logon security
helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
Secure shell (SSHv2)
uses external servers to securely log in to a remote device; with authentication and encryption, it protects against IP
spoofing and plain-text password interception; increases the security of Secure FTP (SFTP) transfers
DHCP snooping
enables DHCP clients to receive IP addresses from authorized DHCP servers and maintains a list of DHCP entries for
trusted ports; prevents users from receiving fake IP addresses and reduces ARP attacks, improving security
IP source guard
filters packets on a per-port basis to prevent illegal packets from being forwarded
ARP attack protection
protects from attacks using a large number of ARP requests with a host-specific, user-selectable threshold
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
IEEE 802.1X support
provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and
PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between
authenticated clients and the access point
Media access control (MAC) authentication
provides simple authentication based on a user's MAC address; supports local or RADIUS-based authentication
Multiple user authentication methods
o IEEE 802.1X
uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance
with industry standards
o Web-based authentication
provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the
IEEE 802.1X supplicant
o MAC-based authentication
authenticates the client with the RADIUS server based on the client's MAC address
DHCP protection
Page 8
QuickSpecs
HPE 7500 Switch Series
Overview
•
•
•
blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Endpoint Admission Defense (EAD)
provides security policies to users accessing a network
Port isolation
secures and adds privacy, and prevents malicious attackers from obtaining user information
IEEE 802.1AE MACsec
provides switch-to-host with IEEE 802.1X or switch-to-switch hardware encryption, and authentication. Requires Comware
v7 with specific hardware only. Refer to the hardware manuals for details.
Convergence
•
•
•
•
•
•
•
•
LLDP-MED (Media Endpoint Discovery)
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure
network devices such as IP phones
Multicast Source Discovery Protocol (MSDP)
allows multiple PIM-SM domains to interoperate; is used for inter-domain multicast applications
Internet Group Management Protocol (IGMP)
utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports
IGMPv1, v2, and v3
Protocol Independent Multicast (PIM)
defines modes of Internet IPv4 and IPv6 multicasting to allow one-to-many and many-to-many transmission of
information; supports PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Multicast(SSM)
Multicast Border Gateway Protocol (MBGP)
allows multicast traffic to be forwarded across BGP networks and kept separate from unicast traffic
Multicast Listener Discovery (MLD) protocol
establishes, maintains, and manages IPv6 multicast groups and networks; supports v1 and v2 and utilizes Any-Source
Multicast (ASM) or Source-Specific Multicast (SSM)
Multicast VLAN
allows multiple VLANs to receive the same IPv4 or IPv6 multicast traffic, lessening network bandwidth demand by
reducing or eliminating multiple streams to each VLAN
Voice VLAN
automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
Integration
•
•
Open Application Architecture (OAA)
provides high-performance application-specific modules fully integrated with the switching architecture; uses the chassis
high-speed backplane to access network-related data; increases performance, reduces costs, and simplifies network
management
VPN 20 Gb/s firewall module
Provides enhanced stateful packet inspection and filtering; supports flexible security zones and virtual firewall
containment; offers advanced VPN services with 3DES and AES encryption at high performance and low latency; facilitates
Web content filtering; and enables application prioritization and optimization
Software-defined networking
•
OpenFlow 1.3
enables SDN to provide an end-to-end solution to automate the network, allowing for rapid application deployments
Page 9
QuickSpecs
HPE 7500 Switch Series
Overview
(Comware v7 only)
Additional information
•
•
•
•
Green initiative support
provides support for RoHS and WEEE regulations
Low power-consumption switch
Is rated among the switches with the lowest power consumption in the industry by Miercom independent tests
Unified Hewlett Packard Enterprise Comware operating system with modular architecture
provides an easy-to-enhance-and-extend feature set, which doesn't require whole-scale changes; all switching, routing,
and security platforms leverage the Comware OS, a common unified modular operating system
OPEX savings
simplifies and streamlines deployment, management, and training through the use of a common operating system,
thereby cutting costs as well as reducing the risk of human errors associated with having to manage multiple operating
systems across different platforms and network layers
Warranty and support
•
•
1-year warranty
See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your
product purchase.
Software releases
to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software
releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary
Page 10
QuickSpecs
HPE 7500 Switch Series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
HPE FlexNetwork 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
• Must select min 1 Power Supply
• 2 - JH209A included
• min=0 \ max=8 SFP/SFP + Transceivers
• Min=0 \ Max = 2 QSFP Transceiver
• 10U - Height
JH331A
See Configuration
NOTE:1, 2, 3, 4
HPE FlexNetwork 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
• Must select min 1 Power Supply
• 2 - JH209A included
• min=0 \ max=8 SFP/SFP + Transceivers
• Min=0 \ Max = 2 QSFP Transceiver
• 13U - Height
JH332A
See Configuration
NOTE:1, 2, 3, 4
HPE FlexNetwork 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
• Must select min 1 Power Supply
• 2 - JH209A included
• min=0 \ max=8 SFP or SFP + Transceivers
• Min=0 \ Max = 2 QSFP Transceiver
• 16U - Height
JH333A
See Configuration
NOTE:1, 2, 3, 4
HPE FlexNetwork 7502 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 4U - Height
JD242C
See Configuration
NOTE:5
HPE FlexNetwork 7503 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 4U - Height
JD240C
See Configuration
NOTE:4
HPE FlexNetwork 7506 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 13U - Height
JD239C
See Configuration
NOTE:4
HPE FlexNetwork 7510 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 16U - Height
JD238C
See Configuration
NOTE:4
Page 11
QuickSpecs
HPE 7500 Switch Series
Configuration
Configuration Rules:
Note 1
The following Transceivers install into this Module: (Use BTO only when adding to switch)
HPE X170 1G SFP LC LH70 1550 Transceiver
HPE X170 1G SFP LC LH70 1570 Transceiver
HPE X170 1G SFP LC LH70 1590 Transceiver
HPE X170 1G SFP LC LH70 1610 Transceiver
HPE X170 1G SFP LC LH70 1510 Transceiver
HPE X120 1G SFP LC LH100 Transceiver
HPE X125 1G SFP LC LH40 1310nm Transceiver
HPE X120 1G SFP LC LH40 1550nm Transceiver
HPE X125 1G SFP LC LH70 Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP LC BX 10-U Transceiver
HPE X120 1G SFP LC BX 10-D Transceiver
HPE X110 100M SFP LC LH40 Transceiver
HPE X110 100M SFP LC LH80 Transceiver
HPE X115 100M SFP LC FX Transceiver
HPE X110 100M SFP LC LX Transceiver
HPE X115 100M SFP LC BX 10-U Transceiver
HPE X115 100M SFP LC BX 10-D Transceiver
JD109A
JD110A
JD111A
JD112A
JD115A
JD103A
JD061A
JD062A
JD063B
JD089B
JD118B
JD119B
JD098B
JD099B
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
Note 2
The following 40G Transceivers install into this Module: (Use BTO only when adding to
switch)
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
JG661A
HPE X140 40G QSFP+ MPO SR4 Transceiver
JG325B
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
JG709A
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
JL251A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
JG328A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter
JG330A
Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter
JG331A
Cable
Note 3
The following Transceivers install into this Module: (Use BTO only when adding to switch)
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LRM Transceiver
JD093B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
Page 12
QuickSpecs
HPE 7500 Switch Series
Configuration
Note 4
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JD095C
JD096C
JD097C
JG081C
JC784C
If this Switch Chassis is selected at least one of these Power Supplies is required: (Use BTO
only when adding to switch)
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
JD208A
JD218A
JD219A
JD227A
Note 5
If this Switch Chassis is selected at least one of these Power Supplies is required: (Use BTO
only when adding to switch)
HPE FlexNetwork 7502 300W AC Power Supply
JD226A
HPE FlexNetwork 7500 650W DC Power Supply
JD209A
HPE FlexNetwork 7500 650W AC Power Supply
JD217A
Remarks:
BTO Model 1s should never receive an 0D1 and therefore can not be factory integrated into
a rack.
Box Level Integration CTO Models
CTO Solution Sku
HPE 75xx Configure-to-order Switch Solution
• SSP trigger sku
JG707A
CTO Base Sku
HPE FlexNetwork 7502 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 4U - Height
JD242C
See Configuration
NOTE:2, 3
HPE FlexNetwork 7503 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 10U - Height
JD240C
See Configuration
NOTE:1, 3, 4
HPE FlexNetwork 7506 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 13U - Height
JD239C
See Configuration
NOTE:1, 3, 4
Page 13
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE FlexNetwork 7510 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 16U - Height
JD238C
See Configuration
NOTE:1, 3, 4
Configuration Rules:
Note 1
Note 2
If this Switch Chassis is selected at least one of these Power Supplies is required: (Use
#0D1 if switch is CTO)
HPE FlexNetwork 7503/7506/7506 V 650W AC Power Supply Unit
JH215A
If this Switch Chassis is selected at least one of these Power Supplies is required: (Use
#0D1 if switch is CTO)
HPE FlexNetwork 7502 300W AC Power Supply
HPE FlexNetwork 7500 650W DC Power Supply
HPE FlexNetwork 7500 650W AC Power Supply
JD226A
JD209A
JD217A
Note 3
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is
required on the Switch Chassis and integrated to the JG707A - HPE 75xx Configure-toorder Switch Solution. (Min 1/Max 1 Switch per SSP)
Note 4
If this Switch Chassis is selected at least one of these Power Supplies is required: (Use
#0D1 if switch is CTO)
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
JD208A
JD218A
JD219A
JD227A
Rack Level Integration CTO Models
HPE FlexNetwork 7502 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 4U - Height
JD242C
See Configuration
NOTE:1, 3
HPE FlexNetwork 7503 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 10U - Height
JD240C
See Configuration
NOTE:2, 3, 4
HPE FlexNetwork 7506 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 13U - Height
JD239C
See Configuration
NOTE:2, 3, 4
Page 14
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE FlexNetwork 7510 Switch Chassis
• Must select min 1 Power Supply
• Must select Min 1 Fabric Module
• 16U - Height
JD238C
See Configuration
NOTE:2, 3, 4
Configuration Rules:
Note 1
Note 2
If this Switch Chassis is selected at least one of these Power Supplies is required: (Use
#0D1 if switch is CTO)
HPE FlexNetwork 7502 300W AC Power Supply
HPE FlexNetwork 7500 650W DC Power Supply
HPE FlexNetwork 7500 650W AC Power Supply
JD226A
JD209A
JD217A
If this Switch Chassis is selected at least one of these Power Supplies is required: (Use
#0D1 if switch is CTO)
HPE FlexNetwork 7503/7506/7506 V 650W AC Power Supply Unit
JH215A
Note 3
If HP CTO Switch Chassis is selected to be Rack Level Integration, Then the CTO Switch
Chassis needs to integrate (with #0D1) to the BW966A and BW968A HPE Universal Rack
Only. (Default to the BW966A.)
Note 4
If this Switch Chassis is selected at least one of these Power Supplies is required: (Use
#0D1 if switch is CTO)
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
JD208A
JD218A
JD219A
JD227A
Modules
Fabric Modules
System (std 0 // max 2) User Selection (min 1 // max 2) per enclosure
JH333A JH332A, and JH331A only System (std 2 // max 2) User Selection (min 0 // max 0) per enclosure
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ MPU
• min=0 \ max=8 SFP/SFP + Transceivers
• Min=0 \ Max = 2 QSFP Transceiver
JH209A
See Configuration
NOTE:5, 15, 16, 17, 18
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ MPU
• No supported Transceivers
JH208A
See Configuration
NOTE:14
Page 15
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main Processing Unit
• Min=0 \ Max = 2 QSFP Transceiver
JH207A
See Configuration
NOTE:15, 16
HPE FlexNetwork 7500 384Gbps Fabric Module with 2 XFP Ports
• min=0 \ max=2 XFP Transceivers
JD193B
See Configuration
NOTE:1, 4
HPE FlexNetwork 7500 384Gbps Fabric Module
• No supported Transceivers
JD194B
See Configuration
NOTE:1
HPE FlexNetwork 7500 384Gbps Fabric Module with 12 SFP Ports
• min=0 \ max=12 SFP Transceivers
JD224A
See Configuration
NOTE:1, 5
HPE FlexNetwork 7500 384Gbps Advanced Fabric Module
• No supported Transceivers
JD195A
See Configuration
NOTE:1
HPE FlexNetwork 7500 768Gbps Fabric Module
• No supported Transceivers
JD220A
See Configuration
NOTE:11
Configuration Rules:
Note 1
Note 4
Note 5
These Modules install to the following switches: (Use #0D1 if switch is CTO)
HPE FlexNetwork 7506 Switch Chassis
HPE FlexNetwork 7503 Switch Chassis
JD239C
JD240C
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HPE X135 10G XFP LC ER Transceiver
HPE X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
HPE X130 10G XFP LC SR Transceiver
HPE X130 10G XFP LC ZR Single Mode 80km 1550nm Transceiver
HPE X180 10G XFP LC LH 80km 1538.98nm DWDM Transceiver
HPE X180 10G XFP LC LH 80km 1539.77nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1540.56nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1542.14nm DWDM Transceiver
HPE X180 10G XFP LC LH 80km 1542.94nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1558.98nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1559.79nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1560.61nm DWDM Transceiver
JD121A
JD108B
JD117B
JD107A
JG226A
JG227A
JG228A
JG229A
JG230A
JG231A
JG232A
JG233A
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
Page 16
QuickSpecs
HPE 7500 Switch Series
Configuration
Note 11
HPE X170 1G SFP LC LH70 1550 Transceiver
HPE X170 1G SFP LC LH70 1570 Transceiver
HPE X170 1G SFP LC LH70 1590 Transceiver
HPE X170 1G SFP LC LH70 1610 Transceiver
HPE X170 1G SFP LC LH70 1510 Transceiver
HPE X120 1G SFP LC LH100 Transceiver
HPE X125 1G SFP LC LH40 1310nm Transceiver
HPE X120 1G SFP LC LH40 1550nm Transceiver
HPE X125 1G SFP LC LH70 Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP LC BX 10-U Transceiver
HPE X120 1G SFP LC BX 10-D Transceiver
HPE X110 100M SFP LC LH40 Transceiver
HPE X110 100M SFP LC LH80 Transceiver
HPE X115 100M SFP LC FX Transceiver
HPE X110 100M SFP LC LX Transceiver
HPE X115 100M SFP LC BX 10-U Transceiver
HPE X115 100M SFP LC BX 10-D Transceiver
JD109A
JD110A
JD111A
JD112A
JD115A
JD103A
JD061A
JD062A
JD063B
JD089B
JD118B
JD119B
JD098B
JD099B
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
These Modules install to the following switches only: (Use #0D1 if switch is CTO)
HPE FlexNetwork 7510 Switch Chassis
JD238C
Note 12
If 2 Fabric Modules are selected they must be the same Sku number.
Note 13
The following PoE DIMM installs into this Module: (Use #0D1 if switch is CTO)
Note 14
These Modules install to the following switches: (Use #0D1 if switch is CTO)
HPE FlexNetwork 7502 Switch Chassis
JD242C
These Modules install to the following switches only: (Use #0D1 if switch is CTO)
HPE FlexNetwork 7503 Switch Chassis
HPE FlexNetwork 7506 Switch Chassis
HPE FlexNetwork 7510 Switch Chassis
JD240C
JD239C
JD238C
The following 40G Transceivers install into this Module: (Use #0D1 or #B01 if switch is
CTO)
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
HPE X140 40G QSFP+ MPO SR4 Transceiver
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
JG661A
JG325B
JG709A
JG326A
JG327A
Note 15
Note 16
Page 17
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
JG328A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter
Cable
JG330A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter
Cable
JG331A
Note 17
Note 18
Remark:
The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO)
HPE X130 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC LRM Transceiver
HPE X130 10G SFP+ LC LR Transceiver
HPE X130 10G SFP+ LC ER 40km Transceiver
HPE X130 10G SFP+ LC LH 80km Transceiver
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JD092B
JD093B
JD094B
JG234A
JG915A
JD095C
JD096C
JD097C
JG081C
JC784C
The following 40G Transceivers install into this Module: (Use #0D1 or #B01 if switch is
CTO)
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
JL251A
For Switch A7503,A7506 and A7506-V, these modules can only be inserted into the Slot 0
and Slot 1. And for Switch A7510, this module can only be inserted into the Slot 5 and Slot
6.
For Switch A7503-S, this module can only be inserted into the Slot 0.
Ethernet Modules
(Switch JD242C ) System (std 0 // max 2) User Selection (min 0 // max 2) per enclosure
(Switch JD240C and JH331A) System (std 0 // max 3) User Selection (min 0 // max 3) per enclosure
(Switch JD239C and JH331A) System (std 0 // max 6) User Selection (min 0 // max 6) per enclosure
(Switch JD238C and JH331A) System (std 0 // max 10) User Selection (min 0 // max 10) per enclosure
HPE FlexNetwork 7500 24-port GbE SFP SC Module
• min=0 \ max=24 SFP Transceivers
JD203B
See Configuration
NOTE:1, 18, 19
HPE FlexNetwork 7500 12-port GbE SFP SC Module
• min=0 \ max=12 SFP Transceivers
JD207A
See Configuration
NOTE:1, 18, 19
HPE FlexNetwork 7500 48-port GbE SFP Enhanced Module
JD221A
Page 18
QuickSpecs
HPE 7500 Switch Series
Configuration
•
min=0 \ max=48 SFP Transceivers
HPE FlexNetwork 7500 40-port Gig-T/8-port SFP PoE-upgradable SC Module
• min=0 \ max= 8 SFP Transceivers
See Configuration
NOTE:1, 16, 19, 20
JD228B
See Configuration
NOTE: 1, 8, 14, 17, 18,
19
HPE FlexNetwork 7500 24-port GbE SFP Enhanced Module
• min=0 \ max=24 SFP Transceivers
JD231A
See Configuration
NOTE: 1, 16, 19, 20
HPE FlexNetwork 7500 24-port GbE SFP with 8 Combo SD Module
• 16 SFP 100/1000 Mbps ports
• 8 dual-personality ports - 1000M Combo ports (SFP or RJ-45)
• min=0 \ max=24 SFP Transceivers
JD234A
See Configuration
NOTE: 1, 16, 19, 20
HPE FlexNetwork 7500 48-port GbE SFP SD Module
• min=0 \ max=48 SFP Transceivers
JD237A
See Configuration
NOTE: 1, 16, 19, 20
HPE FlexNetwork 7500 48-port GbE SFP SC Module
• min=0 \ max=48 SFP Transceivers
JD211B
See Configuration
NOTE: 1, 18, 19
HPE FlexNetwork 7500 20-port Gig-T/4-port GbE Combo PoE-upgradable SC Module
• min=0 \ max= 4 SFP Transceivers
JC669A
See Configuration
NOTE: 1, 12, 17, 18, 19
HPE FlexNetwork 7500 8-port 10G SFP+ SC Module
• min=0 \ max=8 per SFP+ Transceivers
JF290A
See Configuration
NOTE: 3, 16, 19, 20
HPE FlexNetwork 7500 4-port 10GbE XFP Enhanced Module
• min=0 \ max=4 XFP
JD232A
See Configuration
NOTE: 4, 16, 19, 20
HPE FlexNetwork 7500 2-port 10GbE XFP Enhanced Module
• min=0 \ max=2 XFP
JD233A
See Configuration
NOTE: 4, 16, 19, 20
HP FlexNetwork 7500 8-port 10GbE XFP SD Module
• min=0 \ max=8 XFP Transceivers
JD191A
See Configuration
NOTE: 4, 16, 19, 20
Page 19
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE FlexNetwork 7500 2-port 10GbE XFP SC Module
• min=0 \ max=2 XFP Transceivers
JD201A
See Configuration
NOTE: 4, 18, 19
HPE FlexNetwork 7500 24-port Gig-T/2-port 10GbE XFP SC Module
• min=0 \ max=2 XFP Transceivers
JD206A
See Configuration
NOTE: 4, 18, 19
HPE FlexNetwork 7500 4-port 10GbE XFP SD Module
• min=0 \ max=4 XFP Transceivers
JD235A
See Configuration
NOTE:4, 16, 19, 20
HPE FlexNetwork 7500 2-port 10GbE XFP SD Module
• min=0 \ max=2 XFP Transceivers
JD236A
See Configuration
NOTE: 4, 16, 19, 20
HPE FlexNetwork 7500 24-port GbE SFP/2-port 10GbE XFP Module
• min=0 \ max=2 XFP min=0 \ max=24 SFP Transceivers
JD205A
See Configuration
NOTE: 5, 18, 19
HPE FlexNetwork 7500 24-port GbE SFP with 8 Combo and 2-port 10GbE XFP SD Module
• 16 SFP 100/1000 Mbps ports
• 8 dual-personality ports - 1000M Combo ports (SFP or RJ-45)
• 2 XFP 10GbE ports
• min=0 \ max=2 XFP min=0 \ max=24 SFP Transceivers
JD230A
See Configuration
NOTE: 4, 5, 16, 19, 20
HPE FlexNetwork 7500 24-port Gig-T SC Module
• No supported Transceivers
JD204B
See Configuration
NOTE: 18, 19
HPE FlexNetwork 7500 48-port Gig-T PoE-ready SC Module
• No supported Transceivers
JD210A
See Configuration
NOTE: 8, 14, 18, 19
HPE FlexNetwork 7500 48-port Gig-T PoE+ SD Module
• Includes DIMM
JD229B
See Configuration
NOTE: 16, 17, 19, 20
HPE FlexNetwork 7500 48-port 1000BASE-T PoE+ SC Module
• No supported Transceivers
JG663A
See Configuration
NOTE: 16, 17, 19, 20
HPE FlexNetwork 7500 Load Balancing Module
• No supported Transceivers
JD252A
See Configuration
NOTE: 18, 19
Page 20
QuickSpecs
HPE 7500 Switch Series
Configuration
HP 10500/7500 NetStream Monitoring Module
• No supported Transceivers
HP 7500 48-port Gig-T PoE-ready Module
• No supported Transceivers
JD254A
See Configuration
NOTE: 18, 19
JD199B
See Configuration
NOTE: 7, 8, 14, 17, 18,
19
HPE 10500/11900/7500 20Gbps VPN Firewall Module
• min=0 \ max=2 SFP Transceivers
JG372A
See Configuration
NOTE: 13, 16, 19
HPE FlexNetwork 7500 4-port 40GbE QSFP+ SC Module
• min=0 \ max=4 QSFP+ Transceivers
JC792A
See Configuration
NOTE:10, 16, 19
HP 7500 4-port 40GbE CFP SC Module
• min=0 \ max=4 CFP Transceivers
JG373A
See Configuration
NOTE: 11, 18, 19
HP 10500/7500 20G Unified Wired-WLAN Module
JG639A
See Configuration
NOTE: 15, 16, 19
HPE FlexNetwork 7500 44-port SFP/4-port SFP+ SE Module
• min=0 \ max=48 SFP Transceivers or
• min=0 \ max=4 SFP+ Transceivers or
• min=0 \ max=48 JD102B
JH210A
See Configuration
NOTE:1, 3, 16, 20
HPE FlexNetwork 7500 24-port SFP/4-port SFP+ SE Module
• min=0 \ max=24 SFP Transceivers or
• min=0 \ max=4 SFP+ Transceivers or
• min=0 \ max=24 JD102B
JH211A
See Configuration
NOTE:1, 3, 16, 20
HPE FlexNetwork 7500 48-port 1000BASE-T SE Module
• No supported Transceivers
JH212A
See Configuration
NOTE:16, 20
HPE FlexNetwork 7500 48-port 1000BASE-T with PoE+ SE Module
• No supported Transceivers
JH213A
See Configuration
NOTE:16, 20
HPE FlexNetwork 7500 16-port 1/10GbE SFP+ SF Module
JH214A
Page 21
QuickSpecs
HPE 7500 Switch Series
Configuration
•
•
min=0 \ max=16 SFP Transceivers or
min=0 \ max=16 SFP+ Transceivers or
HPE FlexNetwork 7500 12-port 1/10GbE SFP+ EC Module
• min=0 \ max=12 SFP Transceivers or
• min=0 \ max=12 SFP+ Transceivers or
See Configuration
NOTE:1, 3, 16, 20
JH309A
See Configuration
NOTE:1, 3, 16, 20
Configuration Rules:
Note 1
Note 2
Note 3
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HPE X170 1G SFP LC LH70 1550 Transceiver
HPE X170 1G SFP LC LH70 1570 Transceiver
HPE X170 1G SFP LC LH70 1590 Transceiver
HPE X170 1G SFP LC LH70 1610 Transceiver
HPE X170 1G SFP LC LH70 1510 Transceiver
HPE X120 1G SFP LC LH100 Transceiver
HPE X125 1G SFP LC LH40 1310nm Transceiver
HPE X120 1G SFP LC LH40 1550nm Transceiver
HPE X125 1G SFP LC LH70 Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP LC BX 10-U Transceiver
HPE X120 1G SFP LC BX 10-D Transceiver
HPE X110 100M SFP LC LH40 Transceiver
HPE X110 100M SFP LC LH80 Transceiver
HPE X115 100M SFP LC FX Transceiver
HPE X110 100M SFP LC LX Transceiver
HPE X115 100M SFP LC BX 10-U Transceiver
HPE X115 100M SFP LC BX 10-D Transceiver
JD109A
JD110A
JD111A
JD112A
JD115A
JD103A
JD061A
JD062A
JD063B
JD089B
JD118B
JD119B
JD098B
JD099B
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HPE X110 100M SFP LC LH40 Transceiver
HPE X110 100M SFP LC LH80 Transceiver
HPE X115 100M SFP LC BX 10-U Transceiver
HPE X115 100M SFP LC BX 10-D Transceiver
HPE X115 100M SFP LC FX Transceiver
HPE X110 100M SFP LC LX Transceiver
JD090A
JD091A
JD100A
JD101A
JD102B
JD120B
The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO)
HPE X130 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC LRM Transceiver
HPE X130 10G SFP+ LC LR Transceiver
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD092B
JD093B
JD094B
JD095C
Page 22
QuickSpecs
HPE 7500 Switch Series
Configuration
Note 4
Note 5
Note 6
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JD096C
JD097C
JG081C
JC784C
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HPE X135 10G XFP LC ER Transceiver
HPE X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
HPE X130 10G XFP LC SR Transceiver
HPE X130 10G XFP LC ZR Single Mode 80km 1550nm Transceiver
HPE X180 10G XFP LC LH 80km 1538.98nm DWDM Transceiver
HPE X180 10G XFP LC LH 80km 1539.77nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1540.56nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1542.14nm DWDM Transceiver
HPE X180 10G XFP LC LH 80km 1542.94nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1558.98nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1559.79nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1560.61nm DWDM Transceiver
JD121A
JD108B
JD117B
JD107A
JG226A
JG227A
JG228A
JG229A
JG230A
JG231A
JG232A
JG233A
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HPE X170 1G SFP LC LH70 1550 Transceiver
HPE X170 1G SFP LC LH70 1570 Transceiver
HPE X170 1G SFP LC LH70 1590 Transceiver
HPE X170 1G SFP LC LH70 1610 Transceiver
HPE X170 1G SFP LC LH70 1510 Transceiver
HPE X120 1G SFP LC LH100 Transceiver
HPE X125 1G SFP LC LH40 1310nm Transceiver
HPE X120 1G SFP LC LH40 1550nm Transceiver
HPE X125 1G SFP LC LH70 Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP LC BX 10-U Transceiver
HPE X120 1G SFP LC BX 10-D Transceiver
HPE X110 100M SFP LC LH40 Transceiver
HPE X110 100M SFP LC LH80 Transceiver
HPE X115 100M SFP LC FX Transceiver
HPE X110 100M SFP LC LX Transceiver
HPE X135 10G XFP LC ER Transceiver
HPE X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
HPE X130 10G XFP LC SR Transceiver
HPE X130 10G XFP LC ZR Single Mode 80km 1550nm Transceiver
JD109A
JD110A
JD111A
JD112A
JD115A
JD103A
JD061A
JD062A
JD063B
JD089B
JD118B
JD119B
JD098B
JD099B
JD090A
JD091A
JD102B
JD120B
JD121A
JD108B
JD117B
JD107A
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
Page 23
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE X170 1G SFP LC LH70 1550 Transceiver
HPE X170 1G SFP LC LH70 1570 Transceiver
HPE X170 1G SFP LC LH70 1590 Transceiver
HPE X170 1G SFP LC LH70 1610 Transceiver
HPE X170 1G SFP LC LH70 1510 Transceiver
HPE X120 1G SFP LC LH100 Transceiver
HPE X125 1G SFP LC LH40 1310nm Transceiver
HPE X120 1G SFP LC LH40 1550nm Transceiver
HPE X125 1G SFP LC LH70 Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X120 1G SFP LC BX 10-U Transceiver
HPE X120 1G SFP LC BX 10-D Transceiver
HPE X115 100M SFP LC BX 10-U Transceiver
HPE X115 100M SFP LC BX 10-D Transceiver
Note 7
This Module is not supported on the JD242x at this time.
Note 8
The following DIMMs install into this Module: (Use #0D1 if switch is CTO)
HPE FlexNetwork 7500 PoE DIMM Memory Module
JD109A
JD110A
JD111A
JD112A
JD115A
JD103A
JD061A
JD062A
JD063B
JD089B
JD118B
JD119B
JD098B
JD099B
JD100A
JD101A
JD192B
Note 10
The following 40G Transceivers install into this Module: (Use #0D1 or #B01 if switch is
CTO)
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
JG661A
HPE X140 40G QSFP+ MPO SR4 Transceiver
JG325B
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
JG709A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
JG328A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter
Cable
JG330A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter
Cable
JG331A
Note 11
The following CFP Transceivers install into this Module:
HPE X140 40G CFP LC LR4 10km SM Transceiver
JC857A
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HPE X125 1G SFP LC LH40 1310nm Transceiver
HPE X120 1G SFP LC LH40 1550nm Transceiver
HPE X125 1G SFP LC LH70 Transceiver
HPE X120 1G SFP LC SX Transceiver
JD061A
JD062A
JD063B
JD118B
Note 13
Page 24
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE X120 1G SFP LC LX Transceiver
Note 14
The following PoE DIMM installs into this Module: (Use #0D1 if switch is CTO)
JD192B - HPE FlexNetwork 7500 PoE DIMM Memory Module (must be installed to enable
PoE on the these modules)
Note 16
Selecting this module requires one of the following:
HPE FlexNetwork 7503 Switch Chassis
HPE FlexNetwork 7506 Switch Chassis
HPE FlexNetwork 7510 Switch Chassis
HPE FlexNetwork 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
Note 17
If JD242C and JH208a is selected, Then this Module is not allowed.
Note 18
This Module is not supported with the following MPU's:
HPE FlexNetwork 7502 Main Processing Unit
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main
Processing Unit
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE
QSFP+ MPU
Note 19
Note 20
Remark:
If this module is selected, then the following Comware V5 MPU's are compatible:
HPE FlexNetwork 7500 384Gbps Fabric Module with 2 XFP Ports
HPE FlexNetwork 7500 384Gbps TAA-compliant Fabric/MPU with 2 10GbE XFP Ports
HPE FlexNetwork 7500 384Gbps Fabric Module
HPE FlexNetwork 7500 384Gbps Fabric Module with 12 SFP Ports
HPE FlexNetwork 7500 384Gbps Advanced Fabric Module
HPE FlexNetwork 7500 384Gbps TAA-compliant Fabric/Main Processing Unit
HPE FlexNetwork 7500 768Gbps Fabric Module
HPE FlexNetwork 7500 768Gbps TAA-compliant Fabric/Main Processing Unit
If this module is selected, then the following Comware V7 MPU's are compatible:
HPE FlexNetwork 7502 Main Processing Unit
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main
Processing Unit
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE
QSFP+ MPU
JD119B
JD240C
JD239C
JD238C
JH331A
JH332A
JH333A
JH208A
JH207A
JH209A
JD193B
JC699A
JD194B
JD224A
JD195A
JC700A
JD220A
JC701A
JH208A
JH207A
JH209A
JG639A and JG645A - Additional AP licenses available below in the 'Switch Enclosure
Options' category.
7500 PoE Module
Page 25
QuickSpecs
HPE 7500 Switch Series
Configuration
System (std 0 // max 1) User Selection (min 0 // max 1) per Ethernet or Fabric Module
HPE FlexNetwork 7500 PoE DIMM Memory Module
JD192B
See Configuration
NOTE:1, 3, 6
Configuration Rules:
Note 1
The JD192B is optional when you have selected the JD199B, JD198B, JD210A, JC709A,
JC710A or JD228B modules.
Note 3
If 1 or more of the JD192B (PoE DIMM Module) is ordered than the customer must also
order 2 of JD208A, JD218A, JD219A, or JD227A in order to support PoE. (Except for JD242x
see rule 6)
Note 6
This Module is supported on the JD242x only when an External DC Power Source is
connected to the rear terminals. (See Installation Guide)
Transceivers
SFP+ Transceivers
HPE X130 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC LRM Transceiver
HPE X130 10G SFP+ LC LR Transceiver
HPE X130 10G SFP+ LC ER 40km Transceiver
HPE X130 10G SFP+ LC LH 80km Transceiver
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JD092B
JD093B
JD094B
JG234A
JG915A
JD095C
JD096C
JD097C
JG081C
JC784C
SFP Transceivers
HPE X170 1G SFP LC LH70 1550 Transceiver
HPE X170 1G SFP LC LH70 1570 Transceiver
HPE X170 1G SFP LC LH70 1590 Transceiver
HPE X170 1G SFP LC LH70 1610 Transceiver
HPE X170 1G SFP LC LH70 1510 Transceiver
HPE X120 1G SFP LC LH100 Transceiver
HPE X125 1G SFP LC LH40 1310nm Transceiver
HPE X120 1G SFP LC LH40 1550nm Transceiver
HPE X120 1G SFP RJ45 T Transceiver
JD109A
JD110A
JD111A
JD112A
JD115A
JD103A
JD061A
JD062A
JD089B
Page 26
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X125 1G SFP LC LH70 Transceiver
HPE X120 1G SFP LC BX 10-U Transceiver
HPE X120 1G SFP LC BX 10-D Transceiver
HPE X110 100M SFP LC LH40 Transceiver
HPE X110 100M SFP LC LH80 Transceiver
HPE X115 100M SFP LC FX Transceiver
HPE X110 100M SFP LC LX Transceiver
HPE X115 100M SFP LC BX 10-U Transceiver
HPE X115 100M SFP LC BX 10-D Transceiver
JD118B
JD119B
JD063B
JD098B
JD099B
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
XFP Transceivers
HPE X135 10G XFP LC ER Transceiver
HPE X130 10G XFP LC ZR Single Mode 80km 1550nm Transceiver
HPE X130 10G XFP LC SR Transceiver
HPE X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
HPE X180 10G XFP LC LH 80km 1538.98nm DWDM Transceiver
HPE X180 10G XFP LC LH 80km 1539.77nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1540.56nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1542.14nm DWDM Transceiver
HPE X180 10G XFP LC LH 80km 1542.94nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1558.98nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1559.79nm DWDM Transceiver
HP X180 10G XFP LC LH 80km 1560.61nm DWDM Transceiver
JD121A
JD107A
JD117B
JD108B
JG226A
JG227A
JG228A
JG229A
JG230A
JG231A
JG232A
JG233A
QSFP+ Transceivers
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
HPE X140 40G QSFP+ MPO SR4 Transceiver
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable
JG661A
JG325B
JG709A
JL251A
JG326A
JG327A
JG328A
JG329A
JG330A
JG331A
CFP Transceivers
HPE X140 40G CFP LC LR4 10km SM Transceiver
JC857A
Page 27
QuickSpecs
HPE 7500 Switch Series
Configuration
Internal Power Supplies
System (std 0 // max 2) User Selection (min 1 // max 2)
HPE FlexNetwork 7502 300W AC Power Supply
• includes 1 x c13, 300w
JD226A
See Configuration
NOTE:1, 4
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
JD226A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JD226A#B2C
HPE FlexNetwork 7500 650W DC Power Supply
JD209A
See Configuration
NOTE:1
HPE FlexNetwork 7500 650W AC Power Supply
• includes 1 x c13, 650w
JD217A
See Configuration
NOTE:1, 4
PDU Cable NA/MEX/TW/JP
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
JD217A#B2B
PDU Cable ROW
• C15 PDU Jumper Cord (ROW)
JD217A#B2C
HPE FlexNetwork 7500 1400W DC Power Supply
JD208A
See Configuration
NOTE:2
HPE FlexNetwork 7500 1400W AC Power Supply
• includes 1 x c19, 1400w
JD218A
See Configuration
NOTE:2, 4
PDU Cable NA/MEX/TW/JP
• C19 PDU Jumper Cord (NA/MEX/TW/JP)
JD218A#B2B
PDU Cable ROW
• C19 PDU Jumper Cord (ROW)
JD218A#B2C
High Volt Switch to Wall Power Cord
• NEMA L6-20P Cord (NA/MEX/JP/TW)
JD218A#B2E
Page 28
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE FlexNetwork 7500 2800W AC Power Supply
• includes 2 x c19, 2800w
JD219A
See Configuration
NOTE:2, 4
PDU Cable NA/MEX/TW/JP
• C19 PDU Jumper Cord (NA/MEX/TW/JP)
JD219A#B2B
PDU Cable ROW
• C19 PDU Jumper Cord (ROW)
JD219A#B2C
High Volt Switch to Wall Power Cord
• NEMA L6-20P Cord (NA/MEX/JP/TW)
JD219A#B2E
HPE FlexNetwork 7500 6000W AC Power Supply
• includes 4 x c19, 6000w
JD227A
See Configuration
NOTE:2, 4
PDU Cable NA/MEX/TW/JP
• C19 PDU Jumper Cord (NA/MEX/TW/JP)
JD227A#B2B
PDU Cable ROW
• C19 PDU Jumper Cord (ROW)
JD227A#B2C
High Volt Switch to Wall Power Cord
• NEMA L6-20P Cord (NA/MEX/JP/TW)
JD227A#B2E
HPE FlexNetwork 7503/7506/7506 V 650W AC Power Supply Unit
• includes 4 x c19, 6000w
JH215A
See Configuration
NOTE:4, 5
PDU Cable NA/MEX/TW/JP
• C19 PDU Jumper Cord (NA/MEX/TW/JP)
JH215A#B2B
PDU Cable ROW
• C19 PDU Jumper Cord (ROW)
JH215A#B2C
High Volt Switch to Wall Power Cord
• NEMA L6-20P Cord (NA/MEX/JP/TW)
JH215A#B2E
Configuration Rules:
Note 1
Only supported on the JD242x .
Page 29
QuickSpecs
HPE 7500 Switch Series
Configuration
Note 2
Only supported on the following:
HPE FlexNetwork 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7503 Switch Chassis
HPE FlexNetwork 7506 Switch Chassis
HPE FlexNetwork 7510 Switch Chassis
Note 3
If 2 power supplies are selected they must be the same Sku number.
Note 4
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord)
or #B2E. (See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, #B2C should be the
Defaulted Power Cable option on the Switches/Routers.
Note 5
Only supported on the following:
HPE FlexNetwork 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7503 Switch Chassis
HPE FlexNetwork 7506 Switch Chassis
Remarks:
JH331A
JH332A
JH333A
JD240C
JD239C
JD238C
JH331A
JH332A
JH333A
JD240C
JD239C
Drop down under power supply should offer the following options and results:
Switch to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
High Volt Power Electrical Module to Wall Power Cord - #B2E Option. (Offered only in
North America, Mexico, Taiwan, and Japan)
Switch Enclosure Options
Software Licenses
HP Unified Wired-WLAN 128 AP E-LTU
(min 0 // max 7)
REMARK: This license is for use with the Primary Controllers.
JG649AAE
See Configuration
NOTE:1
HP Unified Wired-WLAN 128 AP Redundant E-LTU
(min 0 // max 7)
REMARK: This license is for use with the Redundant Controllers.
JG902AAE
See Configuration
NOTE:1
Configuration Rules:
Note 1
Only supported on JG639A and JG645A.
Page 30
QuickSpecs
HPE 7500 Switch Series
Configuration
Compact Flash cards
System (std 0 // max 1) User Selection (min 0 // max 1)
HPE X600 1G Compact Flash Card
JC684A
See Configuration
NOTE:1
HPE X600 512M Compact Flash Card
JC685A
See Configuration
NOTE:1
HPE X600 256M Compact Flash Card
JC686A
See Configuration
NOTE:1
Configuration Rules:
Note 1
These CF Cards are supported on the following Modules only:
HPE FlexNetwork 7500 384Gbps Fabric Module with 2 XFP Ports
HPE FlexNetwork 7500 384Gbps Fabric Module
HPE FlexNetwork 7500 768Gbps Fabric Module
HPE FlexNetwork 7500 384Gbps Advanced Fabric Module
HPE FlexNetwork 7500 384Gbps Fabric Module with 12 SFP Ports
HP 7503-S 144Gbps Fabric/MPU with PoE Upgradable 20-port Gig-T/4-port GbE Combo
HP 9500 VPN Firewall Module
JD193B
JD194B
JD220A
JD195A
JD224A
JC666A
JD245A
Options for the SSL VPN Service Board Modules (JD253x)
HP 10500/7500 SSL VPN 1000-user License
min=0\ max=10 per SSL
JD257A
See Configuration
NOTE:1
HP 7500 SSL VPN 1000-user E-LTU
min=0\ max=10 per SSL
JD257AAE
See Configuration
NOTE:1
Configuration Rules:
Note 1
Any mixture of (JD257A, JD257AAE) that equals 10,000 LTU's is the max per any JD253A
module the maximum would be based on the module and not the entire switch.
Spare Fan Assembly
HPE FlexNetwork 7502 Spare Fan Assembly
JD213A
Page 31
QuickSpecs
HPE 7500 Switch Series
Configuration
HPE FlexNetwork 7503 Spare Fan Assembly
JD212A
HPE FlexNetwork 7506 Spare Fan Assembly
JD214A
HPE FlexNetwork 7510 Spare Fan Assembly
JD216A
Remarks:
JD213A - This item is only used to replace the fan module of an 7502 . A host is delivered
with the fan module.
JD212A - This item is only used to replace the fan module of an 7503. A host is delivered
with the fan module.
JD214A - This item is only used to replace the fan module of an 7506. A host is delivered
with the fan module.
JD216A - This item is only used to replace the fan module of an 7510. A host is delivered
with the fan module.
Opacity Shield Kit
HPE FlexNetwork 7510 Opacity Shield Kit
• Supported on JD238C
JG565A#B01
See Configuration
NOTE:1, 4
HPE FlexNetwork 7506 Opacity Shield Kit
• Supported on JD239C
JG566A#B01
See Configuration
NOTE:1, 3
HPE FlexNetwork 7503 Opacity Shield Kit
• Supported on JD240C
JG568A#B01
See Configuration
NOTE:1, 2
Configuration Rules:
Note 1
If selected with a CTO Switch Solution, Quantity 1 of JG586A#B01 must also be ordered.
Note 2
Only supported on the following:
HPE FlexNetwork 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7503 Switch Chassis
JH331A
JD240C
Only supported on the following:
HPE FlexNetwork 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7506 Switch Chassis
JH332A
JD239C
Note 3
Page 32
QuickSpecs
HPE 7500 Switch Series
Configuration
Note 4
Only supported on the following:
HPE FlexNetwork 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7510 Switch Chassis
JH333A
JD238C
Tamper Evidence Labels
HPE 12mm x 60mm Tamper Evidence (100) Labels
JG586A#B01
See Configuration
NOTE:1, 2
Configuration Rules:
Note 1
If selected with a CTO Switch Solution, Quantity 1 of JG565A#B01, JG566A#B01 or
JG568A#B01 must also be ordered.
Note 2
Only supported on the following:
HPE FlexNetwork 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle
HPE FlexNetwork 7503 Switch Chassis
HPE FlexNetwork 7506 Switch Chassis
HPE FlexNetwork 7510 Switch Chassis
Remarks:
JH331A
JH332A
JH333A
JD240C
JD239C
JD238C
Each JG565A, JG566A or JG568A would use 1 of JG586A.
Page 33
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
HPE FlexNetwork 7510 Switch Chassis (JD238C)
Included accessories
1 HP 7510 Spare Fan Assembly (JD216A)
I/O ports and slots
10 I/O module slots
Supports a maximum of 480 Gigabit Ethernet ports or 480 autosensing 10/100/1000 ports or 160
1/10GbE ports or 80 10GbE ports or 40 40GbE ports, or a combination
Additional ports and
slots
2 switch fabric slots
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
includes: 1 x JD216A
1 fan tray slot
Physical characteristics Dimensions
Memory and processor
17.17(w) x 16.54(d) x 27.87(h) in (43.6 x 42.0 x 70.8 cm) (16U height)
Weight
211 lb (95.71 kg) shipping weight
Fabric
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
I/O Module
MIPS64 @ 400 MHz, 512 MB RAM
MIPS64 @ 1000 MHz, 1 GB RAM
Mounting and enclosure Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); Horizontal
surface mounting only
Reliability
Availability
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
99.999%
Operating relative
humidity
10% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
Low-speed fan: 53.5 dB, High-speed fan: 56.7 dB
Electrical characteristics Frequency
50/60 Hz
Voltage
100 - 120 / 200 - 240 VAC, rated
(depending on power supply chosen)
Current
16/50 A
Power output
1400 W
Notes
Based on a common power supply of 1400 W (AC/DC)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47,
Part 15) Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
EN
EN 61000-4-2:1995+A1:1998+A2:2001
ESD
EN 61000-4-2
Page 34
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
Radiated
EN 61000-4-3
EFT/Burst
EN 61000-4-4
Surge
EN 61000-4-5
Conducted
EN 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
IMC - Intelligent Management Center; Command-line interface; Web browser; Out-of-band
management (serial RS-232c); SNMP manager; Telnet; Terminal interface (serial RS-232c); Modem
interface; IEEE 802.3 Ethernet mib; Ethernet interface mib
Notes
RFCs supported only in Comware v7:
1541, 1542, 1981, 2080, 2460, 2464, 2473, 2474, 2545, 2711, 2863, 2868, 3315, 3413, 3416, 3484, 3575,
3736, 3810, 3956, 4123, 4271, 4291, 4292, 4293, 4443, 4552, 460, 4659, 4798, 4861, 4862, 5080, 5095,
5340, 5492, 5905 and 6192
For non-TAA environments, IKE/IPSec functionality is provided by the HPE 7500/10500 20Gbps VPN
Firewall Module (JG372A).
Comware v7 MPUs (JH207A, JH208A and JH209A) only support these LPUs:
• Comware v7 LPUs- JH209A, JH210A, JH211A, JH212A, JH213A, JH214A, and JH309A
• Comware v5 LPUs- JG663A, JD229B, JD230A, JD234A, JD237A, JD221A, JD231A, JD232A, JD233A,
JD191A, JD235A, JD236A, JF290A, and JC792A
Performance depends on the MPU/Fabric installed, and when installed with two (2) JH209A the
performance are as follows: up to 1,398 mpps for packet performance and 4,160 Gbps for total
switching capacity.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office
HPE FlexNetwork 7506 Switch Chassis (JD239C)
Included accessories
1 HP 7506 Spare Fan Assembly (JD214A)
I/O ports and slots
6 I/O module slots
Supports a maximum of 288 Gigabit Ethernet ports or 288 autosensing 10/100/1000 ports or 96
1/10GbE ports or 48 10GbE ports or 24 40GbE ports, or a combination
Additional ports and
slots
2 switch fabric slots
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
includes: 1 x JD214A
1 fan tray slot
Physical characteristics Dimensions
Weight
17.17(w) x 16.54(d) x 22.64(h) in (43.6 x 42.0 x 57.5 cm) (13U height)
207 lb (93.9 kg) shipping weight
Page 35
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
Memory and processor
Fabric
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
I/O Module
MIPS64 @ 400 MHz, 512 MB RAM
MIPS64 @ 1000 MHz, 1 GB RAM
Mounting and enclosure Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); Horizontal
surface mounting only
Reliability
Availability
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
99.999%
Operating relative
humidity
10% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
Low-speed fan: 53.6 dB, High-speed fan: 57.7 dB
Electrical characteristics Frequency
50/60 Hz
Achieved Miercom Certified Green Award
Description
The H3C S7506E (HP 7606) is Certified Green in the 2009 Miercom Green
Switches Industry Assessment.
Voltage
100 – 120 / 200 – 240 VAC, rated
(depending on power supply chosen)
Current
16/50 A
Power output
1400 W
Notes
Based on a common power supply of 1400 W (AC/DC)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47,
Part 15) Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
EN
EN 61000-4-2:1995+A1:1998+A2:2001
ESD
EN 61000-4-2
Radiated
EN 61000-4-3
EFT/Burst
EN 61000-4-4
Surge
EN 61000-4-5
Conducted
EN 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
IMC - Intelligent Management Center; Command-line interface; Web browser; Out-of-band
management (serial RS-232c); SNMP manager; Telnet; Terminal interface (serial RS-232c); Modem
Page 36
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
interface; IEEE 802.3 Ethernet mib; Ethernet interface mib
Notes
RFCs supported only in Comware v7:
1541, 1542, 1981, 2080, 2460, 2464, 2473, 2474, 2545, 2711, 2863, 2868, 3315, 3413, 3416, 3484, 3575,
3736, 3810, 3956, 4123, 4271, 4291, 4292, 4293, 4443, 4552, 4607, 4659, 4798, 4861, 4862, 5080, 5095,
5340, 5492, 5905 and 6192
For non-TAA environments, IKE/IPSec functionality is provided by the HPE 7500/10500 20Gbps VPN
Firewall Module (JG372A).
Comware v7 MPUs (JH207A, JH208A and JH209A) only support these LPUs:
• Comware v7 LPUs- JH209A, JH210A, JH211A, JH212A JH213A, JH214A, and JH309A
• Comware v5 LPUs- JG663A, JD229B, JD230A, JD234A, JD237A, JD221A, JD231A, JD232A, JD233A,
JD191A, JD235A, JD236A, JF290A, and JC792A
Performance depends on the MPU/Fabric installed, and when installed with two (2) JH209A the
performance are as follows: up to 968 mpps for packet performance and 2,880 Gbps for total switching
capacity.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office
HPE FlexNetwork 7503 Switch Chassis (JD240C)
Included accessories
1 HP 7503 Spare Fan Assembly (JD212A)
I/O ports and slots
3 I/O module slots
Supports a maximum of 144 Gigabit Ethernet ports or 144 autosensing 10/100/1000 ports or 48
1/10GbE ports or 24 10GbE ports or 12 40GbE ports, or a combination
Additional ports and
slots
2 switch fabric slots
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
includes: 1 x JD212A
1 fan tray slot
Physical characteristics Dimensions
Memory and processor
17.17(w) x 16.54(d) x 17.36(h) in (43.6 x 42.0 x 44.1 cm) (10U height)
Weight
147 lb (66.68 kg) shipping weight
Fabric
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
I/O Module
MIPS64 @ 400 MHz, 512 MB RAM
MIPS64 @ 1000 MHz, 1 GB RAM
Mounting and enclosure Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); Horizontal
surface mounting only
Reliability
Availability
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
99.999%
Operating relative
humidity
10% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
5% to 95%, noncondensing
Page 37
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
relative humidity
Acoustic
Electrical characteristics Frequency
Low-speed fan: 51.6 dB, High-speed fan: 56.1 dB
50/60 Hz
Voltage
100 - 120 / 200 - 240 VAC, rated
(depending on power supply chosen)
Current
16/50 A
Power output
1400 W
Notes
Based on a common power supply of 1400 W (AC/DC)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47,
Part 15) Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
EN
EN 61000-4-2:1995+A1:1998+A2:2001
ESD
EN 61000-4-2
Radiated
EN 61000-4-3
EFT/Burst
EN 61000-4-4
Surge
EN 61000-4-5
Conducted
EN 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
IMC - Intelligent Management Center; Command-line interface; Web browser; Out-of-band
management (serial RS-232c); SNMP manager; Telnet; Terminal interface (serial RS-232c); Modem
interface; IEEE 802.3 Ethernet mib; Ethernet interface mib
Notes
RFCs supported only in Comware v7:
1541, 1542, 1981, 2080, 2460, 2464, 2473, 2474, 2545, 2711, 2863, 2868, 3315, 3413, 3416, 3484, 3575,
3736, 3810, 3956, 4123, 4271, 4291, 4292, 4293, 4443, 4552, 4607, 4659, 4798, 4861, 4862, 5080, 5095,
5340, 5492, 5905 and 6192
For non-TAA environments, IKE/IPSec functionality is provided by the HPE 7500/10500 20Gbps VPN
Firewall Module (JG372A).
Comware v7 MPUs (JH207A, JH208A and JH209A) only support these LPUs:
• Comware v7 LPUs- JH209A, JH210A, JH211A, JH212A, JH213A, JH214A, and JH309A
• Comware v5 LPUs- JG663A, JD229B, JD230A, JD234A, JD237A, JD221A, JD231A, JD232A, JD233A,
JD191A, JD235A, JD236A, JF290A, and JC792A
Performance depends on the MPU/Fabric installed, and when installed with two (2) JH209A the
performance are as follows: up to 645 mpps for packet performance and 1,920 Gbps for total switching
capacity.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office
Page 38
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
HPE FlexNetwork 7502 Switch Chassis (JD242C)
Included accessories
1 HP 7502 Spare Fan Assembly (JD213A)
I/O ports and slots
2 I/O module slots
Supports a maximum of 96 Gigabit Ethernet ports or 96 autosensing 10/100/1000 ports or 32 1/10GbE
ports or 16 10GbE ports or 8 40GbE ports, or a combination
Additional ports and
slots
2 MPU (for management modules) slots
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
includes: 1 x JD213A
1 fan tray slot
Physical characteristics Dimensions
Memory and processor
17.17(w) x 16.54(d) x 6.89(h) in (43.6 x 42.0 x 17.5 cm) (4U height)
Weight
59 lb (26.76 kg) shipping weight
Fabric
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
I/O Module
MIPS64 @ 400 MHz, 512 MB RAM
MIPS64 @ 1000 MHz, 1 GB RAM
Mounting and enclosure Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); Horizontal
surface mounting only
Reliability
Availability
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
99.999%
Operating relative
humidity
10% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
Low-speed fan: 49.8 dB, High-speed fan: 56.7 dB
Electrical characteristics Frequency
50/60 Hz
Voltage
100 – 120 / 200 – 240 VAC, rated
(depending on power supply chosen)
Current
5/10 A
Power output
300 W
Notes
Based on a common power supply of 300 W (AC/DC)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47,
Part 15) Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
EN
EN 61000-4-2:1995+A1:1998+A2:2001
ESD
EN 61000-4-2
Page 39
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
Radiated
EN 61000-4-3
EFT/Burst
EN 61000-4-4
Surge
EN 61000-4-5
Conducted
EN 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
IMC – Intelligent Management Center; Command-line interface; Web browser; Out-of-band
management (serial RS-232c); SNMP manager; Telnet; Terminal interface (serial RS-232c); Modem
interface; IEEE 802.3 Ethernet mib; Ethernet interface mib
Notes
RFCs supported only in Comware v7:
1541, 1542, 1981, 2080, 2460, 2464, 2473, 2474, 2545, 2711, 2863, 2868, 3315, 3413, 3416, 3484, 3575,
3736, 3810, 3956, 4123, 4271, 4291, 4292, 4293, 4443, 4552, 4607, 4659, 4798, 4861, 4862, 5080, 5095,
5340, 5492, 5905 and 6192
For non-TAA environments, IKE/IPSec functionality is provided by the HPE 7500/10500 20Gbps VPN
Firewall Module (JG372A).
IRF functionality is not supported on the HP 7502 Switch Chassis.
Comware v7 MPUs (JH207A, JH208A and JH209A) only support these LPUs:
• Comware v7 LPUs- JH209A, JH210A, JH211A, JH212A, JH213A, JH214A, and JH309A
• Comware v5 LPUs- JG663A, JD229B, JD230A, JD234A, JD237A, JD221A, JD231A, JD232A, JD233A,
JD191A, JD235A, JD236A, JF290A, and JC792A
Performance depends on the MPU/Fabric installed, and when installed with two (2) JH208A the
performance are as follows: up to 213 MPPS for packet performance and 640 Gbps for total switching
capacity.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office
HPE FlexNetwork 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle (JH333A)
Included accessories
1 HP 7510 Spare Fan Assembly (JD216A)
2 HP 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and
2-port 40GbE QSFP+ Main Processing Unit (JH209A)
I/O ports and slots
10 I/O module slots
Supports a maximum of 480 Gigabit Ethernet ports or 480 autosensing 10/100/1000 ports or 160
1/10GbE ports or 80 10GbE ports or 40 40GbE ports, or a combination
Additional ports and
slots
2 switch fabric slots
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
includes: 1 x JD216A
1 fan tray slot
Page 40
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
Physical characteristics Dimensions
Memory and processor
17.17(w) x 16.54(d) x 27.87(h) in (43.6 x 42.0 x 70.8 cm) (16U height)
Weight
211 lb (95.71 kg) shipping weight
Fabric
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
I/O Module
MIPS64 @ 400 MHz, 512 MB RAM
MIPS64 @ 1000 MHz, 1 GB RAM
Mounting and enclosure Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); Horizontal
surface mounting only
Reliability
Availability
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
99.999%
Operating relative
humidity
10% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
Low-speed fan: 53.5 dB, High-speed fan: 56.7 dB
Electrical characteristics Frequency
50/60 Hz
Voltage
100 - 120 / 200 - 240 VAC, rated
(depending on power supply chosen)
Current
16/50 A
Power output
1400 W
Notes
Based on a common power supply of 1400 W (AC/DC)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47,
Part 15) Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
EN
EN 61000-4-2:1995+A1:1998+A2:2001
ESD
EN 61000-4-2
Radiated
EN 61000-4-3
EFT/Burst
EN 61000-4-4
Surge
EN 61000-4-5
Conducted
EN 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
IMC - Intelligent Management Center; Command-line interface; Web browser; Out-of-band
management (serial RS-232c); SNMP manager; Telnet; Terminal interface (serial RS-232c); Modem
interface; IEEE 802.3 Ethernet mib; Ethernet interface mib
Page 41
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
Notes
RFCs supported only in Comware v7:
1541, 1542, 1981, 2080, 2460, 2464, 2473, 2474, 2545, 2711, 2863, 2868, 3315, 3413, 3416, 3484, 3575,
3736, 3810, 3956, 4123, 4271, 4291, 4292, 4293, 4443, 4552, 4607, 4659, 4798, 4861, 4862, 5080, 5095,
5340, 5492, 5905 and 6192
For non-TAA environments, IKE/IPSec functionality is provided by the HPE 7500/10500 20Gbps VPN
Firewall Module (JG372A).
• Comware v7 MPUs (JH207A, JH208A and JH209A) only support these LPUs:
• Comware v7 LPUs- JH209A, JH210A, JH211A, JH212A, JH213A, JH214A, and JH309A
• Comware v5 LPUs- JG663A, JD229B, JD230A, JD234A, JD237A, JD221A, JD231A, JD232A, JD233A,
JD191A, JD235A, JD236A, JF290A, and JC792A
Performance depends on the MPU/Fabric installed, and when installed with two (2) JH209A the
performance are as follows: up to 1,398 mpps for packet performance and 4,160 Gbps for total
switching capacity.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office
HPE FlexNetwork 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle (JH332A)
Included accessories
1 HP 7506 Spare Fan Assembly (JD214A)
2 HP 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and
2-port 40GbE QSFP+ Main Processing Unit (JH209A)
I/O ports and slots
6 I/O module slots
Supports a maximum of 288 Gigabit Ethernet ports or 288 autosensing 10/100/1000 ports or 96
1/10GbE ports or 48 10GbE ports or 24 40GbE ports, or a combination
Additional ports and
slots
2 switch fabric slots
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
includes: 1 x JD214A
1 fan tray slot
Physical characteristics Dimensions
Memory and processor
17.17(w) x 16.54(d) x 22.64(h) in (43.6 x 42.0 x 57.5 cm) (13U height)
Weight
207 lb (93.9 kg) shipping weight
Fabric
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
I/O Module
MIPS64 @ 400 MHz, 512 MB RAM
MIPS64 @ 1000 MHz, 1 GB RAM
Mounting and enclosure Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); Horizontal
surface mounting only
Reliability
Availability
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
99.999%
Operating relative
humidity
10% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
5% to 95%, noncondensing
Page 42
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
relative humidity
Acoustic
Electrical characteristics Frequency
Low-speed fan: 53.6 dB, High-speed fan: 57.7 dB
50/60 Hz
Achieved Miercom Certified Green Award
Descriptions
The H3C S7506E (HP 7506) is Certified Green in the 2009 Miercom Green
Switches Industry Assessment.
Voltage
100 - 120 / 200 - 240 VAC, rated
(depending on power supply chosen)
Current
16/50 A
Power output
1400 W
Notes
Based on a common power supply of 1400 W (AC/DC)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47,
Part 15) Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
EN
EN 61000-4-2:1995+A1:1998+A2:2001
ESD
EN 61000-4-2
Radiated
EN 61000-4-3
EFT/Burst
EN 61000-4-4
Surge
EN 61000-4-5
Conducted
EN 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
IMC - Intelligent Management Center; Command-line interface; Web browser; Out-of-band
management (serial RS-232c); SNMP manager; Telnet; Terminal interface (serial RS-232c); Modem
interface; IEEE 802.3 Ethernet mib; Ethernet interface mib
Notes
RFCs supported only in Comware v7:
1541, 1542, 1981, 2080, 2460, 2464, 2473, 2474, 2545, 2711, 2863, 2868, 3315, 3413, 3416, 3484, 3575,
3736, 3810, 3956, 4123, 4271, 4291, 4292, 4293, 4443, 4552, 4607, 4659, 4798, 4861, 4862, 5080, 5095,
5340, 5492, 5905 and 6192
For non-TAA environments, IKE/IPSec functionality is provided by the HPE 7500/10500 20Gbps VPN
Firewall Module (JG372A).
Comware v7 MPUs (JH207A, JH208A and JH209A) only support these LPUs:
•Comware v7 LPUs- JH209A, JH210A, JH211A, JH212A, JH213A, JH214A, and JH309A
•Comware v5 LPUs- JG663A, JD229B, JD230A, JD234A, JD237A, JD221A, JD231A, JD232A, JD233A,
JD191A, JD235A, JD236A, JF290A, and JC792A
Performance depends on the MPU/Fabric installed, and when installed with two (2) JH209A the
performance are as follows: up to 968 mpps for packet performance and 2,880 Gbps for total switching
capacity.
Page 43
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office
HPE FlexNetwork 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit Bundle (JH331A)
Included accessories
1 HP 7503 Spare Fan Assembly (JD212A)
2 HP 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and
2-port 40GbE QSFP+ Main Processing Unit (JH209A)
I/O ports and slots
3 I/O module slots
Supports a maximum of 144 Gigabit Ethernet ports or 144 autosensing 10/100/1000 ports or 48
1/10GbE ports or 24 10GbE ports or 12 40GbE ports, or a combination
Additional ports and
slots
2 switch fabric slots
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
includes: 1 x JD212A
1 fan tray slot
Physical characteristics Dimensions
Memory and processor
17.17(w) x 16.54(d) x 17.36(h) in (43.6 x 42.0 x 44.1 cm) (10U height)
Weight
147 lb (66.68 kg) shipping weight
Fabric
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
I/O Module
MIPS64 @ 400 MHz, 512 MB RAM
MIPS64 @ 1000 MHz, 1 GB RAM
Mounting and enclosure Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); Horizontal
surface mounting only
Reliability
Availability
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
99.999%
Operating relative
humidity
10% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
Low-speed fan: 51.6 dB, High-speed fan: 56.1 dB
Electrical characteristics Frequency
50/60 Hz
Voltage
100 - 120 / 200 - 240 VAC, rated
(depending on power supply chosen)
Current
16/50 A
Power output
1400 W
Notes
Based on a common power supply of 1400 W (AC/DC)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47,
Page 44
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
Part 15) Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
EN
EN 61000-4-2:1995+A1:1998+A2:2001
ESD
EN 61000-4-2
Radiated
EN 61000-4-3
EFT/Burst
EN 61000-4-4
Surge
EN 61000-4-5
Conducted
EN 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
IMC - Intelligent Management Center; Command-line interface; Web browser; Out-of-band
management (serial RS-232c); SNMP manager; Telnet; Terminal interface (serial RS-232c); Modem
interface; IEEE 802.3 Ethernet mib; Ethernet interface mib
Notes
RFCs supported only in Comware v7:
1541, 1542, 1981, 2080, 2460, 2464, 2473, 2474, 2545, 2711, 2863, 2868, 3315, 3413, 3416, 3484, 3575,
3736, 3810, 3956, 4123, 4271, 4291, 4292, 4293, 4443, 4552, 4607, 4659, 4798, 4861, 4862, 5080, 5095,
5340, 5492, 5905 and 6192
For non-TAA environments, IKE/IPSec functionality is provided by the HPE 7500/10500 20Gbps VPN
Firewall Module (JG372A).
Comware v7 MPUs (JH207A, JH208A and JH209A) only support these LPUs:
•Comware v7 LPUs- JH209A, JH210A, JH211A, JH212A, JH213A, JH214A, and JH309A
•Comware v5 LPUs- JG663A, JD229B, JD230A, JD234A, JD237A, JD221A, JD231A, JD232A, JD233A,
JD191A, JD235A, JD236A, JF290A, and JC792A
Performance depends on the MPU/Fabric installed, and when installed with two (2) JH209A the
performance are as follows: up to 645 mpps for packet performance and 1,920 Gbps for total switching
capacity.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office
Standards and protocols BGP
(applies to all products in RFC 1771 BGPv4
series)
RFC 1772 Application of the BGP
RFC 1997 BGP Communities Attribute
RFC 1998 PPP Gandalf FZA Compression Protocol
RFC 2385 BGP Session Protection via TCP MD5
RFC 2439 BGP Route Flap Damping
RFC 2796 BGP Route Reflection
RFC 2858 BGP-4 Multi-Protocol Extensions
RFC 2918 Route Refresh Capability
RFC 3065 Autonomous System Confederations for
MIBs
RFC 1156 (TCP/IP MIB)
RFC 1157 A Simple Network Management Protocol
(SNMP)
RFC 1213 MIB II
RFC 1215 A Convention for Defining Traps for use
with the SNMP
RFC 1229 Interface MIB Extensions
RFC 1493 Bridge MIB
RFC 1573 SNMP MIB II
RFC 1643 Ethernet MIB
Page 45
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
BGP
RFC 3392 Capabilities Advertisement with BGP-4
RFC 4271 A Border Gateway Protocol 4 (BGP-4)
RFC 4272 BGP Security Vulnerabilities Analysis
RFC 4273 Definitions of Managed Objects for
BGP-4
RFC 4274 BGP-4 Protocol Analysis
RFC 4275 BGP-4 MIB Implementation Survey
RFC 4276 BGP-4 Implementation Report
RFC 4277 Experience with the BGP-4 Protocol
RFC 4360 BGP Extended Communities Attribute
RFC 4456 BGP Route Reflection: An Alternative to
Full Mesh Internal BGP (IBGP)
RFC 5291 Outbound Route Filtering Capability for
BGP-4
RFC 5292 Address-Prefix-Based Outbound Route
Filter for BGP-4
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1757 Remote Network Monitoring MIB
RFC 1850 OSPFv2 MIB
RFC 1907 SNMPv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2012 SNMPv2 MIB for TCP
RFC 2013 SNMPv2 MIB for UDP
RFC 2096 IP Forwarding Table MIB
RFC 2233 Interfaces MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
Denial of service protection
RFC 2578 Structure of Management Information
RFC 2267 Network Ingress Filtering
Version 2 (SMIv2)
RFC 6192: Protecting the Router Control Plane
RFC 2580 Conformance Statements for SMIv2
Automatic filtering of well-known denial-of-service RFC 2618 RADIUS Client MIB
packets
RFC 2620 RADIUS Accounting MIB
CPU DoS Protection
RFC 2665 Ethernet-Like-MIB
Rate Limiting by ACLs
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
Device management
RFC 2787 VRRP MIB
RFC 1157 SNMPv1/v2c
RFC 2819 RMON MIB
RFC 1305 NTPv3
RFC 2863 The Interfaces Group MIB
RFC 1902 (SNMPv2)
RFC 2925 Ping MIB
RFC 2579 (SMIv2 Text Conventions)
RFC 2932 IP (Multicast Routing MIB)
RFC 2580 (SMIv2 Conformance)
RFC 2933 IGMP MIB
RFC 2819 (RMON groups Alarm, Event, History
RFC 2934 Protocol Independent Multicast MIB for
and Statistics only)
IPv4
Multiple Configuration Files
RFC 3414 SNMP-User based-SM MIB
Multiple Software Images
RFC 3415 SNMP-View based-ACM MIB
SSHv1/SSHv2 Secure Shell
RFC 3417 Simple Network Management Protocol
TACACS/TACACS+
(SNMP) over IEEE 802 Networks
RFC 3418 MIB for SNMPv3
General protocols
RFC 3595 Textual Conventions for IPv6 Flow Label
IEEE 802.1ad Q-in-Q
RFC 3621 Power Ethernet MIB
IEEE 802.1ag Service Layer OAM
RFC 3813 MPLS LSR MIB
IEEE 802.1AX-2008 Link Aggregation
RFC 3814 MPLS FTN MIB
IEEE 802.1p Priority
RFC 3815 MPLS LDP MIB
IEEE 802.1Q VLANs
RFC 3826 AES for SNMP's USM MIB
IEEE 802.1s Multiple Spanning Trees
RFC 4133 Entity MIB (Version 3)
IEEE 802.1w Rapid Reconfiguration of Spanning
RFC 4444 Management Information Base for
Tree
Intermediate System to Intermediate System (ISPage 46
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
IEEE 802.1X PAE
IEEE 802.3ab 1000BASE-T
IEEE 802.3ac (VLAN Tagging Extension)
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3ah Ethernet in First Mile over Point to
Point Fiber - EFMF
IEEE 802.3at
IEEE 802.3ba 40 and 100 Gigabit Ethernet
Architecture
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 894 IP over Ethernet
RFC 903 RARP
RFC 906 TFTP Bootstrap
RFC 925 Multi-LAN Address Resolution
RFC 950 Internet Standard Subnetting Procedure
RFC 951 BOOTP
RFC 959 File Transfer Protocol (FTP)
RFC 1027 Proxy ARP
RFC 1035 Domain Implementation and
Specification
RFC 1042 IP Datagrams
RFC 1058 RIPv1
RFC 1142 OSI IS-IS Intra-domain Routing Protocol
RFC 1195 OSI ISIS for IP and Dual Environments
RFC 1213 Management Information Base for
Network Management of TCP/IP-based internets
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1293 Inverse Address Resolution Protocol
RFC 1305 NTPv3
RFC 1350 TFTP Protocol (revision 2)
RFC 1393 Traceroute Using an IP Option
RFC 1519 CIDR
RFC 1531 Dynamic Host Configuration Protocol
RFC 1533 DHCP Options and BOOTP Vendor
Extensions
RFC 1541 DHCP
IS)
MPLS
RFC 2205 Resource ReSerVation Protocol
RFC 2209 Resource ReSerVation Protocol (RSVP)
RFC 2702 Requirements for Traffic Engineering
Over MPLS
RFC 2858 Multiprotocol Extensions for BGP-4
RFC 2961 RSVP Refresh Overhead Reduction
Extensions
RFC 3031 Multiprotocol Label Switching
Architecture
RFC 3032 MPLS Label Stack Encoding
RFC 3107 Carrying Label Information in BGP-4
RFC 3209 RSVP-TE: Extensions to RSVP for LSP
Tunnels
RFC 3212 Constraint-Based LSP Setup using LDP
RFC 3479 Fault Tolerance for the Label
Distribution
Protocol (LDP)
RFC 3487 Graceful Restart Mechanism for LDP
RFC 3564 Requirements for Support of
Differentiated Service-aware MPLS Traffic
Engineering
RFC 4364 BGP/MPLS IP Virtual Private Networks
(VPNs)
RFC 4379 Detecting Multi-Protocol Label Switched
(MPLS) Data Plane Failures
RFC 4447 Pseudowire Setup and Maintenance
Using LDP
RFC 4448 Encapsulation Methods for Transport of
Ethernet over MPLS Networks
RFC 4664 Framework for Layer 2 Virtual Private
Networks
RFC 4665 Service Requirements for Layer 2
Provider Provisioned Virtual Private Networks
RFC 4761 Virtual Private LAN Service (VPLS)
Using
BGP for Auto-Discovery and Signaling
RFC 4762 Virtual Private LAN Service (VPLS)
Using
Label Distribution Protocol (LDP) Signaling
RFC 5036 LDP Specification
Network management
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP)
RFC 1155 Structure of Management Information
Page 47
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
RFC 1542 BOOTP
RFC 1591 DNS (client only)
RFC 1624 Incremental Internet Checksum
RFC 1701 Generic Routing Encapsulation
RFC 1721 RIP-2 Analysis
RFC 1723 RIP v2
RFC 1812 IPv4 Routing
RFC 1981 Path MTU Discovery for IP version 6
RFC 2030 Simple Network Time Protocol (SNTP)
v4
RFC 2082 RIP-2 MD5 Authentication
RFC 2091 Trigger RIP
RFC 2131 DHCP
RFC 2138 Remote Authentication Dial In User
Service (RADIUS)
RFC 2236 IGMP Snooping
RFC 2338 VRRP
RFC 2453 RIPv2
RFC 2460 IPv6
RFC 2464 Transmission of IPv6 Packets over
Ethernet Networks
RFC 2474 Definition of the Differentiated Services
Field (DS Field) in the IPv4 and IPv6 Headers
RFC 2644 Directed Broadcast Control
RFC 2711 IPv6 Router Alert Option
RFC 2763 Dynamic Name-to-System ID mapping
support
RFC 2784 Generic Routing Encapsulation (GRE)
RFC 2865 Remote Authentication Dial In User
Service (RADIUS)
RFC 2868 RADIUS Attributes for Tunnel Protocol
Support
RFC 2966 Domain-wide Prefix Distribution with
Two-Level IS-IS
RFC 2973 IS-IS Mesh Groups
RFC 3022 Traditional IP Network Address
Translator (Traditional NAT)
RFC 3277 IS-IS Transient Blackhole Avoidance
RFC 3413 Simple Network Management Protocol
(SNMP) Applications
RFC 3416 Protocol Operations for SNMP
RFC 3484 Default Address Selection for Internet
Protocol version 6 (IPv6)
RFC 3567 Intermediate System to Intermediate
System (IS-IS) Cryptographic Authentication
RFC 3575 IANA Considerations for RADIUS
RFC 3719 Recommendations for Interoperable
Networks using Intermediate System to
RFC 1157 SNMPv1
RFC 1448 Protocol Operations for version 2 of the
Simple Network Management Protocol (SNMPv2)
RFC 2211 Controlled-Load Network
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
RFC 3411 SNMP Management Frameworks
RFC 3412 SNMPv3 Message Processing
RFC 3414 SNMPv3 User-based Security Model
(USM)
RFC 3415 SNMPv3 View-based Access Control
Model VACM)
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
OSPF
RFC 1245 OSPF protocol analysis
RFC 1246 Experience with OSPF
RFC 1765 OSPF Database Overflow
RFC 1850 OSPFv2 Management Information Base
(MIB), traps
RFC 2154 OSPF w/ Digital Signatures (Password,
MD-5)
RFC 2328 OSPFv2
RFC 2370 OSPF Opaque LSA Option
RFC 3101 OSPF NSSA
RFC 3137 OSPF Stub Router Advertisement
RFC 3623 Graceful OSPF Restart
RFC 3630 Traffic Engineering Extensions to
OSPFv2
RFC 4061 Benchmarking Basic OSPF Single Router
Control Plane Convergence
RFC 4062 OSPF Benchmarking Terminology and
Concepts
RFC 4063 Considerations When Using Basic OSPF
Convergence Benchmarks
RFC 4222 Prioritized Treatment of Specific OSPF
Version 2 Packets and Congestion Avoidance
RFC 4577 OSPF as the Provider/Customer Edge
Protocol for BGP/MPLS IP Virtual Private Networks
(VPNs)
RFC 4811 OSPF Out-of-Band LSDB
Resynchronization
RFC 4812 OSPF Restart Signaling
RFC 4813 OSPF Link-Local Signaling
RFC 4940 IANA Considerations for OSPF
Page 48
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
Intermediate System (IS-IS)
RFC 3736 Stateless Dynamic Host Configuration
Protocol (DHCP) Service for IPv6
RFC 3784 ISIS TE support
RFC 3786 Extending the Number of IS-IS LSP
Fragments Beyond the 256 Limit
RFC 3787 Recommendations for Interoperable IP
Networks using Intermediate System to
Intermediate System (IS-IS)
RFC 3810 Multicast Listener Discovery Version 2
(MLDv2) for IPv6
RFC 3847 Restart signaling for IS-IS
RFC 3956 Embedding the Rendezvous Point (RP)
Address in an IPv6 Multicast Address
RFC 4123: Session Initiation Protocol (SIP)-H.323
Interworking Requirements
RFC 4251 The Secure Shell (SSH) Protocol
Architecture
RFC 4271 A Border Gateway Protocol 4 (BGP-4)
RFC 4291 IP Version 6 Addressing Architecture
RFC 4292 IP Forwarding Table MIB
RFC 4293 Management Information Base for the
Internet Protocol (IP)
RFC 4443 Internet Control Message Protocol
(ICMPv6) for the Internet Protocol Version 6 (IPv6)
Specification
RFC 4486 Subcodes for BGP Cease Notification
Message
RFC 4552 Authentication/Confidentiality for
OSPFv3
RFC 4607 Source-Specific Multicast for IP
RFC 4659 BGP-MPLS IP Virtual Private Network
(VPN) Extension for IPv6 VPN
RFC 4798 Connecting IPv6 Islands over IPv4 MPLS
Using IPv6 Provider Edge Routers (6PE)
RFC 4861 Neighbor Discovery for IP version 6
(IPv6)
RFC 4862 IPv6 Stateless Address
Autoconfiguration
RFC 4884 Extended ICMP to Support Multi-Part
Messages
RFC 4941 Privacy Extensions for Stateless Address
Autoconfiguration in IPv6
RFC 5095 Deprecation of Type 0 Routing Headers
in IPv6
RFC 5130 A Policy Control Mechanism in IS-IS
Using Administrative Tags
RFC 5340 OSPF for IPv6
QoS/CoS
IEEE 802.1p (CoS)
RFC 1349 Type of Service in the Internet Protocol
Suite
RFC 2211 Specification of the Controlled-Load
Network Element Service
RFC 2212 Guaranteed Quality of Service
RFC 2474 DSCP DiffServ
RFC 2475 DiffServ Architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Security
IEEE 802.1X Port Based Network Access Control
RFC 1321 The MD5 Message-Digest Algorithm
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1492 TACACS+
RFC 1994 PPP Challenge Handshake
Authentication Protocol (CHAP)
RFC 2082 RIP-2 MD5 Authentication
RFC 2104 Keyed-Hashing for Message
Authentication
RFC 2408 Internet Security Association and Key
Management Protocol (ISAKMP)
RFC 2409 The Internet Key Exchange (IKE)
RFC 2716 PPP EAP TLS Authentication Protocol
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
RFC 2867 RADIUS Accounting Modifications for
Tunnel Protocol Support
RFC 2868 RADIUS Attributes for Tunnel Protocol
Support
RFC 2869 RADIUS Extensions
RFC 5080: Common Remote Authentication Dial In
User Service (RADIUS) Implementation Issues and
Suggested Fixes
Access Control Lists (ACLs)
Guest VLAN for 802.1X
MAC Authentication
Port Security
SSHv1/SSHv2 Secure Shell
VPN
RFC 2403 - HMAC-MD5-96
RFC 2404 - HMAC-SHA1-96
RFC 2405 - DES-CBC Cipher algorithm
RFC 2407 - Domain of interpretation
RFC 2473 Generic Packet Tunneling in IPv6
Page 49
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
RFC 5492 Capabilities Advertisement with BGP-4
RFC 5905 Network Time Protocol Version 4:
Protocol and Algorithms Specification
IP multicast
RFC 2236 IGMPv2
RFC 2283 Multiprotocol Extensions for BGP-4
RFC 2362 PIM Sparse Mode
RFC 3376 IGMPv3
RFC 3446 Anycast Rendezvous Point (RP)
mechanism using Protocol Independent Multicast
(PIM) and Multicast Source Discovery Protocol
(MSDP)
RFC 3618 Multicast Source Discovery Protocol
(MSDP)
RFC 3973 PIM Dense Mode
RFC 4541 Considerations for Internet Group
Management Protocol (IGMP) and Multicast
Listener
Discovery (MLD) Snooping Switches
RFC 4601 Draft 10 PIM Sparse Mode
RFC 4604 Using Internet Group Management
Protocol Version 3 (IGMPv3) and Multicast
Listener
Discovery Protocol Version 2 (MLDv2) for
Source-Specific Multicast
RFC 4605 IGMP/MLD Proxying
RFC 4607 Source-Specific Multicast for IP
RFC 4610 Anycast-RP Using Protocol Independent
Multicast (PIM)
RFC 5059 Bootstrap Router (BSR) Mechanism for
Protocol Independent Multicast (PIM)
Specification
RFC 2547 BGP/MPLS VPNs
RFC 2917 A Core MPLS IP VPN Architecture
RFC 3947 - Negotiation of NAT-Traversal in the
IKE
RFC 4302 - IP Authentication Header (AH)
RFC 4303 - IP Encapsulating Security Payload
(ESP)
IPsec
RFC 1828 IP Authentication using Keyed MD5
RFC 1829 The ESP DES-CBC Transform
RFC 2085 HMAC-MD5 IP Authentication with
Replay Prevention
RFC 2401 IP Security Architecture
RFC 2402 IP Authentication Header
RFC 2406 IP Encapsulating Security Payload
RFC 2410 - The NULL Encryption Algorithm and
its
use with IPsec
RFC 2411 IP Security Document Roadmap
IPv6
RFC 1886 DNS Extension for IPv6
RFC 1887 IPv6 Unicast Address Allocation
Architecture
RFC 1981 IPv6 Path MTU Discovery
RFC 2080 RIPng for IPv6
RFC 2081 RIPng Protocol Applicability Statement
RFC 2292 Advanced Sockets API for IPv6
RFC 2373 IPv6 Addressing Architecture
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Autoconfiguration
RFC 2463 ICMPv6
Page 50
QuickSpecs
HPE 7500 Switch Series
Technical Specifications
RFC 2464 Transmission of IPv6 over Ethernet
Networks
RFC 2473 Generic Packet Tunneling in IPv6
RFC 2526 Reserved IPv6 Subnet Anycast
Addresses
RFC 2529 Transmission of IPv6 Packets over IPv4
RFC 2545 Use of MP-BGP-4 for IPv6
RFC 2553 Basic Socket Interface Extensions for
IPv6
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2767 Dual stacks IPv46 & IPv6
RFC 2893 Transition Mechanisms for IPv6 Hosts
and Routers
RFC 3056 Connection of IPv6 Domains via IPv4
Clouds
RFC 3307 IPv6 Multicast Address Allocation
RFC 3315 DHCPv6 (client and relay)
RFC 3484 Default Address Selection for IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3736 Stateless Dynamic Host Configuration
Protocol (DHCP) Service for IPv6
RFC 3810 MLDv2 for IPv6
RFC 4214 Intra-Site Automatic Tunnel Addressing
Protocol (ISATAP)
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
Page 51
QuickSpecs
HPE 7500 Switch Series
Accessories
HPE 7500 Switch Series accessories
Modules
HPE FlexNetwork 7500 12-port GbE SFP SC Module
HPE FlexNetwork 7500 24-port GbE SFP SC Module
HPE FlexNetwork 7500 24-port GbE SFP Enhanced Module
HPE FlexNetwork 7500 24-port GbE SFP with 8 Combo SD Module
HPE FlexNetwork 7500 24-port GbE SFP/2-port 10GbE XFP Module
HPE FlexNetwork 7500 24-port GbE SFP with 8 Combo and 2-port 10GbE XFP SD Module
HPE FlexNetwork 7500 48-port GbE SFP SC Module
HPE FlexNetwork 7500 48-port GbE SFP Enhanced Module
HPE FlexNetwork 7500 48-port GbE SFP SD Module
HPE FlexNetwork 7500 20-port Gig-T/4-port GbE Combo PoE-upgradable SC Module
HPE FlexNetwork 7500 24-port Gig-T SC Module
HPE FlexNetwork 7500 24-port Gig-T/2-port 10GbE XFP SC Module
HPE FlexNetwork 7500 40-port Gig-T/8-port SFP PoE-upgradable SC Module
HPE FlexNetwork 7500 48-port Gig-T PoE-ready SC Module
HPE FlexNetwork 7500 48-port Gig-T PoE+ SD Module
HPE FlexNetwork 7500 48-port 1000BASE-T PoE+ SC Module
HPE FlexNetwork 7500 2-port 10GbE XFP SC Module
HPE FlexNetwork 7500 2-port 10GbE XFP Enhanced Module
HPE FlexNetwork 7500 2-port 10GbE XFP SD Module
HPE FlexNetwork 7500 4-port 10GbE XFP Enhanced Module
HPE FlexNetwork 7500 4-port 10GbE XFP SD Module
HP FlexNetwork 7500 8-port 10GbE XFP SD Module
HPE FlexNetwork 7500 8-port 10G SFP+ SC Module
HPE FlexNetwork 7500 4-port 40GbE QSFP+ SC Module
HP 7500 4-port 40GbE CFP SC Module
HPE FlexNetwork 7500 44-port SFP/4-port SFP+ SE Module
HPE FlexNetwork 7500 24-port SFP/4-port SFP+ SE Module
HPE FlexNetwork 7500 48-port 1000BASE-T SE Module
HPE FlexNetwork 7500 48-port 1000BASE-T with PoE+ SE Module
HPE FlexNetwork 7500 16-port 1/10GbE SFP+ SF Module
HPE FlexNetwork 7500 12-port 1/10GbE SFP+ EC Module
JD207A
JD203B
JD231A
JD234A
JD205A
JD230A
JD211B
JD221A
JD237A
JC669A
JD204B
JD206A
JD228B
JD210A
JD229B
JG663A
JD201A
JD233A
JD236A
JD232A
JD235A
JD191A
JF290A
JC792A
JG373A
JH210A
JH211A
JH212A
JH213A
JH214A
JH309A
Transceivers
HPE X125 1G SFP LC LH40 1310nm Transceiver
HPE X120 1G SFP LC LH40 1550nm Transceiver
HPE X125 1G SFP LC LH70 Transceiver
HPE X120 1G SFP RJ45 T Transceiver
HPE X120 1G SFP LC BX 10-U Transceiver
HPE X120 1G SFP LC BX 10-D Transceiver
JD061A
JD062A
JD063B
JD089B
JD098B
JD099B
Page 52
QuickSpecs
HPE 7500 Switch Series
Accessories
HPE X120 1G SFP LC LH100 Transceiver
HPE X170 1G SFP LC LH70 1550 Transceiver
HPE X170 1G SFP LC LH70 1570 Transceiver
HPE X170 1G SFP LC LH70 1590 Transceiver
HPE X170 1G SFP LC LH70 1610 Transceiver
HPE X170 1G SFP LC LH70 1510 Transceiver
HPE X120 1G SFP LC SX Transceiver
HPE X120 1G SFP LC LX Transceiver
HPE X110 100M SFP LC LH40 Transceiver
HPE X110 100M SFP LC LH80 Transceiver
HPE X115 100M SFP LC BX 10-U Transceiver
HPE X115 100M SFP LC BX 10-D Transceiver
HPE X115 100M SFP LC FX Transceiver
HPE X110 100M SFP LC LX Transceiver
HPE X130 10G XFP LC ZR Single Mode 80km 1550nm Transceiver
HPE X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver
HPE X130 10G XFP LC SR Transceiver
HPE X135 10G XFP LC ER Transceiver
HPE X130 10G SFP+ LC SR Transceiver
HPE X130 10G SFP+ LC LRM Transceiver
HPE X130 10G SFP+ LC LR Transceiver
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HPE X180 10G XFP LC LH 80km 1538.98nm DWDM Transceiver
HPE X180 10G XFP LC LH 80km 1539.77nm DWDM Transceiver
HPE X180 10G XFP LC LH 80km 1542.94nm DWDM Transceiver
HPE X130 10G SFP+ LC ER 40km Transceiver
HPE X140 40G QSFP+ MPO SR4 Transceiver
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable
JD103A
JD109A
JD110A
JD111A
JD112A
JD115A
JD118B
JD119B
JD090A
JD091A
JD100A
JD101A
JD102B
JD120B
JD107A
JD108B
JD117B
JD121A
JD092B
JD093B
JD094B
JD095C
JD096C
JD097C
JG081C
JG226A
JG227A
JG230A
JG234A
JG325B
JG661A
JG709A
JL251A
JG326A
JG327A
JG328A
JG329A
JG330A
JG331A
Cables
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ839A
AJ838A
AJ837A
Page 53
QuickSpecs
HPE 7500 Switch Series
Accessories
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ836A
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
AJ834A
AJ833A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Appliance
HPE 10500/11900/7500 20Gbps VPN Firewall Module
JG372A
Memory
HPE FlexNetwork 7500 PoE DIMM Memory Module
HPE X600 1G Compact Flash Card
HPE X600 512M Compact Flash Card
HPE X600 256M Compact Flash Card
JD192B
JC684A
JC685A
JC686A
HP 7510 Switch Chassis (JD238C)
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main Processing Unit
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ MPU
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
HPE FlexNetwork 7510 Spare Fan Assembly
JH207A
JH209A
JD208A
JD218A
JD219A
JD227A
JD216A
HP 7506 Switch Chassis (JD239C)
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main Processing Unit
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ MPU
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
HPE FlexNetwork 7503/7506/7506 V 650W AC Power Supply Unit
HPE FlexNetwork 7506 Spare Fan Assembly
JH207A
JH209A
JD208A
JD218A
JD219A
JD227A
JH215A
JD214A
HP 7503 Switch Chassis (JD240C)
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main Processing Unit
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ MPU
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
JH207A
JH209A
JD208A
JD218A
Page 54
QuickSpecs
HPE 7500 Switch Series
Accessories
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
HPE FlexNetwork 7503/7506/7506 V 650W AC Power Supply Unit
HPE FlexNetwork 7503 Spare Fan Assembly
JD219A
JD227A
JH215A
JD212A
HP 7502 Switch Chassis (JD242C)
HPE FlexNetwork 7502 Main Processing Unit
HPE FlexNetwork 7500 650W AC Power Supply
HPE FlexNetwork 7500 650W DC Power Supply
HPE FlexNetwork 7502 300W AC Power Supply
HPE RPS 800 Redundant Power Supply
HPE FlexNetwork 7502 Spare Fan Assembly
JH208A
JD217A
JD209A
JD226A
JD183A
JD213A
HP 7510 Switch with 2x2.4Tbps Fabric and Main Processing Unit (JH333A)
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main Processing Unit
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ MPU
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
HPE FlexNetwork 7510 Spare Fan Assembly
JH207A
JH209A
JD208A
JD218A
JD219A
JD227A
JD216A
HP 7506 Switch with 2x2.4Tbps Fabric and Main Processing Unit (JH332A)
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main Processing Unit
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ MPU
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
HPE FlexNetwork 7510 Spare Fan Assembly
HPE FlexNetwork 7503/7506/7506 V 650W AC Power Supply Unit
HPE FlexNetwork 7506 Spare Fan Assembly
JH207A
JH209A
JD208A
JD218A
JD219A
JD227A
JD216A
JH215A
JD214A
HP 7503 Switch with 2x2.4Tbps Fabric and Main Processing Unit (JH331A)
HPE FlexNetwork 7500 1.2Tbps Fabric with 2-port 40GbE QSFP+ for IRF-only Main Processing Unit
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ MPU
HPE FlexNetwork 7500 1400W DC Power Supply
HPE FlexNetwork 7500 1400W AC Power Supply
HPE FlexNetwork 7500 2800W AC Power Supply
HPE FlexNetwork 7500 6000W AC Power Supply
HPE FlexNetwork 7510 Spare Fan Assembly
HPE FlexNetwork 7503/7506/7506 V 650W AC Power Supply Unit
HPE FlexNetwork 7503 Spare Fan Assembly
JH207A
JH209A
JD208A
JD218A
JD219A
JD227A
JD216A
JH215A
JD212A
Page 55
QuickSpecs
HPE 7500 Switch Series
Accessories
Page 56
QuickSpecs
HPE 7500 Switch Series
Summary of Changes
Date
08-Apr-2016
18-Mar-2016
15-Jan-2016
Version History
From Version 41 to
42
From Version 40 to
41
From Version 39 to
40
Action
Changed
Description of Change:
SKU descriptions updated on all document.
Changed
Overview, Features and Benefits, Configuration, Technical
Specifications and Accessories updated.
Overview and Technical Specifications updated
SKUs removed:
Changed
Removed
•
•
•
•
01-Dec-2015
02-Oct-2015
28-Sep-2015
From Version 38 to
39
From Version 37 to
38
From Version 36 to
37
Changed
Overview and Technical Specifications updated
Changed
Configuration section updated
Added
Models added:
•
•
•
•
•
•
•
03-Jul-2014
10-Jun-2014
15-Apr-2014
31-Mar-2014
19-Mar-2014
22-Nov-2013
14-Oct-2013
JD238C
JD239C
JD240C
JD242C
JH331A
JH332A
JH333A
From Version 35 to
36
From Version 34 to
35
From Version 33 to
34
From Version 30 to
33
From Version 29 to
30
From Version 28 to
29
From Version 27 to
28
Changed
Accessories section added
Updates made on Overview, Features and Benefits,
Configuration and Technical Specifications.
SKUs descriptions and Configuration menu updated.
Changed
Configuration menu updated.
Changed
Switch Enclosure Options were updated in the
Configuration section.
Minor edit was made in Product Overview.
From Version 26 to
Changed
Changed
17-Feb-2015
JD238B
JD239B
JD240B
JD242B
Changed
Changed
Changed
Changed
Configuration Rules was revised throughout
Configuration.
Transceivers were revised in Configuration.
Box Level Integration CTO Models, Rack Level Integration
CTO Models, and Internal Power Supplies were revised in
Configuration.
Configuration was revised, including adding a new
Page 57
QuickSpecs
HPE 7500 Switch Series
Summary of Changes
30-Sep-2013
27
From Version 25 to
26
Changed
Transceiver.
Configuration was revised.
Features and Benefits was revised.
27-Sep-2013
11-Sep-2013
19-Aug-2013
12-Jul-2013
19-Jun-2013
07-Jun-2013
22-May-2013
12-Apr-2013
From Version 24 to
25
From Version 23 to
24
From Version 22 to
23
From Version 21 to 22
From Version 20 to
21
From Version 19 to
20
From Version 18 to 19
From Version 17 to 18
Changed
Product overview was revised.
Configuration was revised.
Changed
Minor edit was made in Configuration.
Changed
Box Level Integration CTO Models and Rack Level
Integration CTO Models were revised in Configuration.
Updated the Configuration Information.
HP 10500/7500 20G Unified Wired-WLAN Module was
added to Accessory Product Details
Changed
Changed
Changed
Changed
Removed
Changed
19-Mar-2013
01-Mar-2013
19-Feb-2013
From Version 16 to 17
From Version 15 to 16
From Version 13 to 15
Changed
Changed
Added
Changed
04-Dec-2012
From Version 12 to 13
Changed
24-Sep-2012
From Version 11 to 12
Changed
21-May-2012
From Version 10 to 11
Changed
14-May-2012
From Version 9 to 10
Changed
02-Apr-2012
26-Mar-2012
16-Nov-2011
26-Sep-2011
From Version 8 to 9
From Version 7 to 8
From Version 6 to 7
From Version 5 to 6
Changed
Changed
Changed
Changed
07-Sep-2011
07-Mar-2011
From Version 4 to 5
From Version 3 to 4
Added
Changed
Integration was revised in Features and Benefits
Updated the Direct Attach Copper Cables in the
Configuration Information section.
Updated the Configuration Information.
Completely removed Accessories section.
Accessory Product Details: Removed several sections.
Configuration: Completely updated Build To Order
section.
Corrected the new Configuration section.
Corrected the formatting in the new Configuration section.
Added the Configuration section.
Changes were made to Features and Benefits. The model
specifications had minor updates, as did the Accessories
section.
Changes were made to Features and Benefits. The model
specifications had minor updates, as did the Accessories
section.
Updated Features and Benefits, Introduction, the
specifications, and Accessories.
Updated the Standards and protocols section of Technical
specifications.
Features and Benefits, Accessories, and the weight and
dimensions for each spec were revised.
Part number was revised.
Accessories were revised.
Specifications were revised.
Models, Features and Benefits and Accessories were
revised.
Accessory Product Details was added.
Accessories product descriptions and notes and services
in Models were revised.
Page 58
QuickSpecs
HPE 7500 Switch Series
Summary of Changes
18-Feb-2011
From Version 2 to 3
Changed
08-Oct-2010
From Version 1 to 2
Changed
Clarified in a couple of locations about the availability of
IRF.
Corrected the options section.
Page 59
QuickSpecs
HPE 7500 Switch Series
Summary of Changes
Sign up for updates
Rate this document
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
To learn more, visit: http://www.hpe.com/networking
c04111585 - 13805 - Worldwide - V42 - 08- April-2016
Page 60
Download PDF
Similar pages