Yamaha STAGEPAS 400BT Data Sheet

 STAGEPAS 400BT
Portable PA Systems
Overview
400-watt, portable PA system with 8-channel powered mixer, two
8" speakers, a Bluetooth® input, SPX digital reverbs, an onboard
feedback suppressor and versatile EQ.
Features
•400W (200W + 200W) power output
•High quality speakers (LF:8" woofer/ HF:1" voice coil compression driver)
•Detachable 8-channel mixer (4 mono/line + 4 mono / 2 stereo line)
•Bluetooth® audio streaming
•1-Knob Master EQ™ with virtual bass boost
•High resolution SPX digital reverbs (4 types, parameter control)
•Onboard feedback suppressor
•Great-sounding 2-band channel EQ
•Switchable stereo/ mono inputs
•Hi-Z (high impedance) inputs
•Phantom power
•Monitor and Subwoofer outputs
•Optional reverb footswitch
Technical Data Sheet
1/6
STAGEPAS 400BT
Portable PA Systems
Specifications1/2
General Specifications
System
System Type
Powered mixer with 2 passive speakers
Frequency Range (-10dB)
55Hz-20kHz
Maximum SPL (Measured Peak IEC Noise@1m)
125dB SPL / speaker
Power Consumption
30W (Idle), 70W (1/8 Power)
Power Requirements
100V-240V 50Hz/60Hz
Dimentions (W x H x D)
Speaker 289mm x 472mm x 275mm (11.4" x 18.6" x 10.8"), Mixer 308mm x 180mm x 116mm (12.1" x 7.1" x 4.6")
Net weight
18.3 kg (40.3 lbs) (2 x Speaker 7.7kg + Mixer 2.9kg)
Powered Mixer
Mixer
Mixing Channels
8
Analog Inputs
4 mono mic/line + 4 mono / 2 stereo line
Bluetooth Input
Bluetooth Ver.4.1, A2DP v1.2, Maximum Range: Approx. 10 m
Channel EQ
2-band (HIGH Shelving: 8kHz, LOW Shelving: 100Hz)
Channel Functions
Hi-Z switch: CH4, ST/MONO switch: CH5/6-7/8
Digital Effects
SPX digital reverb (4 program, parameter control)
Output Processing
Feedback suppressor, 1-Knob Master EQ™
Phantom Power
+30V (CH1, 2)
Outputs
SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
Control and Others
Reverb foot switch
Built in Amplifiers
Power Rating (Dynamic)
400W (200W + 200W)
Power Rating (Continuous)
360W (180W + 180W)
Speaker
Type
Two-way bass-relfex speakers
Components
LF: 8" (20cm) cone, HF: 1" (2.54cm) voice coil compression driver
Coverage Angle
90° x 60°
Floor Monitor Angle
50°
Handle
1 x Top
Pole Socket
34.8-35.2mm pole socket with StageLok™
Accessories
Included Accessories
Cover panel, Power cord (2m), Speaker cables (6m) x 2, Non-skid pads x 12
Optional Accessories
Yamaha BMS10A (mic stand adaptor) for mixer mount, FC5 (foot switch) for reverb ON/OFF
Technical Data Sheet
2/6
STAGEPAS 400BT
Portable PA Systems
Specifications2/2
Analog Input Specifications
Input Level
Input Terminals
CH IN 1-2
MIC/LINE
XLR
XLR
CH IN 3-4
CH IN 7/8
LINE
MIC
LINE
MIC
Source Impedance
3 kΩ
150 Ω Mics
3 kΩ
150 Ω Mics
Sensitivity
Nominal
Max. before
Clipping
-56 dBu
-35 dBu
-10 dBu
-30 dBu
-9 dBu
+16 dBu
-56 dBu
-35 dBu
-10 dBu
-30 dBu
-9 dBu
+16 dBu
150 Ω Lines
(Hi-Z 10 kΩ)
-50 dBu
-29 dBu
-4 dBu
Connector Type
XLR-3-31
XLR Combo
LINE
10 kΩ
(Hi-Z 1 MΩ)
-24 dBu
-3 dBu
+22 dBu
Phone
-
10 kΩ
150 Ω Lines
-24 dBu
-3 dBu
+22 dBu
Phone*
Pin
-
10 kΩ
150 Ω Lines
-24 dBu
-3 dBu
+22 dBu
RCA Pin
Phone
-
10 kΩ
150 Ω Lines
-18 dBu
+3 dBu
+28 dBu
Phone*
Mini
-
10 kΩ
150 Ω Lines
-18 dBu
+3 dBu
+28 dBu
Stereo Mini
Phone
CH IN 5/6
MIC
Input Impedance
0 dBu=0.775 Vrms, 0 dBV=1 Vrms Phone*: Unbalanced
Output Specifications
Load Impedance
Output Level
Nominal
Max. before Clipping
Typ at THD+N 10%
Dynamic
SPEAKERS OUT [L,R] <0.1 Ω
4Ω Speakers
37.5 W
125 W
180 W
200 W
Phone*
MONITOR OUT [L,R]
600 Ω
10 kΩ Lines
+4 dBu
+20 dBu
-
-
Phone*
SUBWOOFER OUT
150 Ω
10 kΩ Lines
-3 dBu
+17 dBu
-
-
Phone*
Output Terminals
Output Impedance
Connector Type
0 dBu=0.775 Vrms, 0 dBV=1 Vrms Phone*: Unbalanced
Technical Data Sheet
3/6
STAGEPAS 400BT
Portable PA Systems
Dimensions
Unit: mm (inch)
Mixer
Dedicated Speaker
308 (12.1)
472 (18.6)
116 (4.6)
Screw holes
for the Mic Stand Acapter
BMS-10A (optional)
133 (5.2)
2 (0.1)
50°
100 (3.9)
289 (11.4)
275 (10.8)
81 (3.2)
95.5 (3.8)
304 (12.0)
180 (7.1)
Pole diameter
34.8 - 35.2
Options
•Mic Stand Adaptor
BMS10A
•Foot Switch
FC5
Technical Data Sheet
4/6
STAGEPAS 400BT
Portable PA Systems
Architectural and Engineering Specifications
The Yamaha STAGEPAS 400BT shall be a portable PA system that incorporates a powered mixer with a pair of passive speakers.
The mixer section of the powered mixer shall have 8 analog mixing channels (4 mono microphone/line + 4 mono/2 stereo line) and a Bluetooth
input. The STAGEPAS 400BT shall have 2-band channel EQ (HIGH Shelving at 8kHz, LOW Shelving at 100Hz), a Hi-Z switch on channel 4, ST/
MONO switches for channels 5/6 and 7/8, SPX digital reverb with 4 programs and parameter control, a feedback suppressor, 1-Knob Master
EQ™, and +30V phantom power on channels 1 and 2. Outputs shall be SPEAKERS OUT (L and R), MONITOR OUT (L/MONO and R), and
SUBWOOFER OUT (MONO) with auto HPF. A Reverb foot switch connector shall be provided.
The amplifier section of the powered mixer shall have a universal power supply that accepts AC line input from 100V to 240V at 50Hz or 60Hz.
The power output rating shall be 400 watts (200 watts + 200 watts) dynamic, or 360 watts (180 watts + 180 watts) continuous.
The loudspeakers shall incorporate a single 8" cone for the low frequencies and a compression driver with a 1" voice coil for the high frequencies.
The loudspeakers shall meet the following performance criteria: Maximum SPL shall be 125dB at 1 meter, frequency response shall be 55 Hz ~
20 kHz at 10dB below rated sensitivity, and nominal coverage angle shall be 90° horizontal and 60° vertical. The loudspeaker shall have a 50°
floor monitor angle, a top handle, and a 34.8 ~ 35.2 mm pole socket with StageLok™.
Powered mixer dimensions shall be 308 (W) x 180 (H) x 116 (D) mm. Powered mixer weight shall be no more than 2.9 kg. The dimensions of each
loudspeaker shall be 289 (W) x 472 (H) x 275(D) mm. The weight of each loudspeaker shall be no more than 7.7 kg. Total PA system weight shall
be 18.3 kg.
Accessories included with the portable PA system shall be: cover panel, power cord (2 meters), 2 speaker cables (6 meters each), 12 non-skid
pads.
Technical Data Sheet
5/6
STAGEPAS 400BT
Portable PA Systems
+
-
HA
AD
HIGH
LEVEL
AD
DA
L
SPEAKERS OUT
DA
AMP
(-1)
R
MASTER LEVEL
DA
SUM
REVERB
Hi-Z(1MΩ)
AMP
LIMITER
R
REVERB
ON/OFF
BA
EQ
LOW
MIC/LINE(-26dB)
L
REVERB
SUM
Hi-Z
AD
MASTER LEVEL
SUM
LEVEL
COMBO
INPUT
(CH4)
SUM
BA
SP EQ (FIXED)
MIC/LINE(-26dB)
EQ
MASTER EQ
HA
LOW
-
REVERB
FEEDBACK
SUPPRESSOR
+
DSP
LEVEL
REVERB
INPUT
(CH3)
MIC/LINE(-26dB)
BA
HIGH
PHANTOM (+30V)
EQ
HIGH
COMBO
HA
LOW
-
REVERB
L
+
INPUT
(CH1-2)
R
Block Diagrams
SUBWOOFER OUT
(MONO)
DA
BA
EQ
BA
L
BA
BA
HIGH
LOW
INPUT
(CH5/6)
LEVEL
REVERB ON/OFF
FOOT SWITCH
BA
EQ
L(MONO)
ST/MONO
R
MONITOR OUT
MONITOR OUT
BA
R
SUM
SUM
INPUT
(CH7/8)
L
HIGH
LOW
L/R
BA
EQ
LEVEL
ST/MONO
BA
EQ
ON/OFF
PAIRING SW
BLUETOOTH
MODULE
R
*All information subject to change without notice.
*All trademarks and registered trademarks are property of their respective owners.
Created in January, 2018
Technical Data Sheet
6/6
Download PDF
Similar pages