captiva - Conference Room AV

USER MANUAL
020-000816-02
CAPTIVA
DUW350S/DHD400S
The CD included with this printed manual contains an electronic copy in English. Please read all instructions before
using or servicing this product.
Le DC fourni avec ce manuel imprimé contient une copie électronique en français. S'il vous plaît lire toutes les
instructions avant d'utiliser ou de réparer ce produit.
Die mit dieser gedruckten Anleitung gelieferte CD enthält eine elektronische Kopie in Deutsch. Bitte lesen Sie alle
Anweisungen, bevor Sie dieses Produkt verwenden oder warten.
Il CD fornito con il manuale stampato contiene una copia elettronica in lingua italiano. Si prega di leggere tutte le
istruzioni prima di utilizzare o riparare questo prodotto.
El DC incluido con este manual impreso contiene una copia electrónica en español. Por favor, lea todas las
instrucciones antes de usar o dar servicio a este producto.
Table of Contents
1. Usage Notice......................................................................................................... 5
1.1 COPYRIGHT AND TRADEMARKS...............................................................................5
1.2 Safety Information.........................................................................................................5
1.3 Precautions....................................................................................................................7
2. Introduction............................................................................................................ 9
2.1 Package Overview.........................................................................................................9
2.2 Product Overview..........................................................................................................10
2.2.1 Main Unit............................................................................................................10
2.2.2 Control Panel.....................................................................................................11
2.2.3 Output Connections...........................................................................................12
2.2.4 Remote Control..................................................................................................13
3. Installation.............................................................................................................. 14
3.1 Connecting the Projector...............................................................................................14
3.1.1 Connect to Computer/Notebook........................................................................14
3.1.2 Connect to Video Sources.................................................................................15
3.2 Powering the Projector On/Off.......................................................................................16
3.2.1 Powering On the Projector.................................................................................16
3.2.2 Powering off the projector..................................................................................17
3.2.3 Warning Indicator...............................................................................................17
3.3 Adjusting the Projected Image.......................................................................................18
3.3.1 Adjusting the Projector�s Height.........................................................................18
3.3.2 Adjusting the Projector�s Focus.........................................................................19
3.3.3 Adjusting Projection Image Size (Diagonal).......................................................20
4. User Controls......................................................................................................... 22
4.1 Control Panel & Remote Control...................................................................................22
4.1.1 Control Panel.....................................................................................................22
4.1.2 Remote Control..................................................................................................23
4.2 On-screen Display Menus.............................................................................................25
4.2.1 How to operate...................................................................................................25
4.2.2 Image.................................................................................................................26
4.2.3 Configuration......................................................................................................28
4.2.4 Settings..............................................................................................................30
4.2.5 Audio..................................................................................................................32
4.2.6 Options...............................................................................................................33
4.2.7 Options | Laser Settings.....................................................................................35
4.2.8 3D......................................................................................................................36
4.2.9 Interactive..........................................................................................................37
4.2.10 LAN....................................................................................................................38
5. Multimedia............................................................................................................. 44
5.1 Accessing Multimedia Files...........................................................................................44
5.1.1 How to access Multimedia mode.......................................................................44
6. Appendices............................................................................................................ 51
6.1 Installing and Cleaning the Optional Dust Filter............................................................51
6.2 Compatibility Modes......................................................................................................52
6.2.1 VGA Analog.......................................................................................................52
6.2.2 HDMI Digital.......................................................................................................54
6.3 RS232 Commands and Protocol Function List..............................................................56
6.3.1 RS232 Port Setting............................................................................................56
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
3
Table of Contents
6.3.2 RS232 Signals Connection................................................................................56
6.3.3 Commands Set List............................................................................................57
6.4 Optional Accessories.....................................................................................................60
6.5 Regulation & Safety Notices..........................................................................................60
6.6 Ceiling Mount Installation..............................................................................................63
4
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 1: Usage Notice
111
1.1
Usage Notice
COPYRIGHT AND TRADEMARKS
Copyright ©2015 Christie Digital Systems USA, Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade
names of their respective holders.
1.2
Safety Information
The lightning flash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the projector.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT
INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Important Safety Instruction
111 Do not block any ventilation openings. To ensure reliable operation of the projector
and to protect from over heating, it is recommended to install the projector in a
location that does not block ventilation. As an example, do not place the projector on
a crowded coffee table, sofa, bed and so on. Do not put the projector in an enclosure
such as a bookcase or a cabinet that restricts air flow.
222 Do not use the projector near water or moisture. To reduce the risk of fire and/or
electric shock, do not expose the projector to rain or moisture.
333 Do not install near heat sources such as radiators, heaters, stoves or any other
apparatus such as amplifiers that emits heat.
444 Clean only with dry cloth.
555 Only use attachments/accessories specified by the manufacturer.
666 Do not use the unit if it has been physically damaged or abused.
Physical damage/abuse would be (but not limited to):
-- Unit has been dropped.
-- Power supply cord or plug has been damaged.
-- Liquid has been spilled on to the projector.
-- Projector has been exposed to rain or moisture.
-- Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers may expose
you to dangerous voltages or other hazards.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
5
Section 1: Usage Notice
777 Do not let objects or liquids enter the projector. They may touch dangerous voltage
points and short out parts that could result in fire or electric shock.
888 See projector enclosure for safety related markings.
999 The unit should only be repaired by appropriate service personnel.
6
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 1: Usage Notice
1.3
Precautions
Follow all warnings, precautions and maintenance as
recommended in this user’s guide.
WARNING
yy Do not look into the projector’s lens when the light is on. The bright light
may hurt and damage your eyes.
yy To reduce the risk of fire or electric shock, do not expose this projector to
rain or moisture.
yy Do not open or disassemble the projector as this may cause electric shock.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
7
Section 1: Usage Notice
Do:
yy Turn off and unplug the power plug from the AC outlet before cleaning the
product.
yy Use a soft dry cloth with mild detergent to clean the display housing.
yy Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
yy Use a plate beneath the projector while portrait orientation to meet safety
requirement.
Do not:
yy Block the slots and openings on the unit provided for ventilation.
yy Use abrasive cleaners, waxes or solvents to clean the unit.
yy Use under the following conditions:
-- In extremely hot, cold or humid environments.
`` Sea level to 6000 feet
Extremely hot: > 35°C
Extremely cool: < 5°C
`` 6000 feet above
Extremely hot: > 30°C
Extremely cool: < 5°C
`` Extremely humid: > 70% R.H. (Relative Humidity)
-- In areas susceptible to excessive dust and dirt.
-- Near any appliance generating a strong magnetic field.
-- In direct sunlight.
8
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 2: Introduction
222
2.1
Introduction
Package Overview
Unpack and inspect the box contents to ensure all parts listed
below are in the box. If something is missing, contact your
customer service center.
Projector
Power Cord
VGA Cable
Documentation :
ser’s Manual & Quick Start Guide
U
NOTE:
™™ Due to different applications in each country, some regions may have different accessories.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
9
Section 2: Introduction
2.2
Product Overview
2.2.1
Main Unit
5
1
2
3
4
9
8
6
7
Ind.
Part Name
Ind.
Part Name
1
Control Panel
6
Speaker
2
Focus switch
7
Power Socket
3
Ventilation (inlet)
8
Input/Output Connections
4
IR Receiver
9
Lens
5
Ventilation (outlet)
NOTE:
™™ The interface is subject to model’s specifications.
10
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 2: Introduction
2.2.2
Control Panel
1
2
3
4
5
8
6
9
7
Ind.
Part Name
1
Power LED
2
Enter
3
Temp LED
4
Light LED
5
Menu
6
Input
7
Four Directional Select keys
8
Power/Standby button
9
IR Receiver
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
11
Section 2: Introduction
2.2.3
Output Connections
1
8 9
Ind.
2
3
4
5
6
7
10 1112 13 14 15 16 17
Ind.
Connector Name
1
VGA1-In/YPbPr Connector
(PC Analog Signal/Component
Video Input/HDTV/YPbPr)
Connector Name
10
RS-232 Connector (9-pin DCE type)
2
HDMI2 Input Connector
11
Composite Video Input Connector
3
HDMI1 Input Connector
12
Composite Audio Input (right)
Connector
4
USB Connector (Connect PC for
firmware upgrade or interactive)
13
Composite Audio Input (left)
Connector
5
RJ45 connector
14
Audio Output Connector (3.5mm
mini jack)
6
USB Type A Connector
15
Audio Input Connector (3.5mm mini
jack)
7
Power Socket
16
Audio Input Connector (microphone)
8
Interactive Connector (3.5 mm mini
jack)
17
KensingtonTM Lock Port
9
VGA-Out/VGA2-In Connector
NOTE:
™™ Monitor loop through only support in VGA1-In/YPbPr.
12
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 2: Introduction
2.2.4
Remote Control
1
Ind.
2
3
4
5
Part Name
1
Infrared transmitter
2
LED Indicator
3
Power On/Off
4
Enter
5
Four Directional Select keys
6
Menu
7
Exit
8
Zoom in
9
Reset
10
Auto
6
9
7
11
Input
8
12
Zoom out
10
13
Volume +/-
14
11
12
14
Keystone +/-
15
13
15
Image
16
Picture mute
16
17
Aspect ratio
18
17
19
18
VGA1
20
21
19
HDMI1
20
VGA2
21
HDMI2
22
Video
23
Screen freeze
23 22
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
13
Section 3: Installation
333
3.1
Installation
Connecting the Projector
3.1.1
Connect to Computer/Notebook
Router/Network switch
MOLEX
5
E62405SP
R
1
9
External
Display
Microphone
10
Audio Output
Ind.
14
Connector Name
Ind.
Connector Name
1
RS232 Cable
7
Power Cord
2
VGA Cable
8
VGA Output Cable
3
HDMI Cable
9
DC to DC Cable
4
USB Cable
10
Audio Output Cable
5
Audio Cable/RCA
11
Audio Input Cable
6
RJ45 Cable
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 3: Installation
3.1.2
Connect to Video Sources
DVD Player, Set-top Box,
HDTV receiver
2
1
4
3
E62405SP
R
5
Composite Video Output
8
Microphone
6
7
Audio Output
Ind.
2
Connector Name
15-Pin to 3 RCA Component/HDTV
Adaptor
HDMI Cable
6
Composite Video Cable
3
Audio Cable
7
Audio Cable/RCA
4
Audio Cable/RCA
8
Audio Input Cable
1
Ind.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Connector Name
5
Power Cord
15
Section 3: Installation
3.2
Powering the Projector On/Off
3.2.1
Powering On the Projector
111 Securely connect the power cord and signal cable. When connected,
the POWER/STANDBY LED turns Orange.
222 Turn on the projector by pressing “ ” button either on the projector
or on the remote. At this moment, the POWER/STANDBY LED turns
Blue.
333 The startup screen will display in approximately 5 seconds. The first
time you use the projector, you will be asked to select the preferred
language and power saving mode.
444 Turn on and connect the source that you want to display on the
screen (computer, notebook, video player, etc). The projector
detects the source automatically. If not, push menu button and go to
“OPTIONS”.
Make sure that the “Source Lock” has been set to “Off”.
NOTE:
™™ If you connect multiple sources at the same time, press the “INPUT” button on the control panel
or direct source keys on the remote control to switch between inputs.
™™ When the power mode is in standby mode (power consumption < 0.5W), the VGA output/input
and audio are deactivated when the projector is in standby.
1
16
POWER/STANDBY
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 3: Installation
3.2.2
Powering off the projector
111 Press the “ ” button on the remote control or on the control panel to
turn off the projector. The following message will be displayed on the
screen.
Press power key again to confirm
Press the “ ” button again to confirm otherwise the message will
disappear after 10 seconds. When you press the “ ” button for the
second time, the fan will start cooling the system and will shut down.
222 The cooling fans continue to operate for about four seconds for
cooling cycle and the POWER/STANDBY LED will flash Orange.
When the POWER/STANDBY LED lights solid Orange, the projector
has entered standby mode.
If you want to turn the projector back on, you must wait until the
projector has completed the cooling cycle and has entered standby
mode. Once in standby mode, press “ ” button to restart the
projector.
333 Disconnect the power cord from the electrical outlet and the projector.
3.2.3
Warning Indicator
When the warning indicators (see below) come on, the projector will
automatically shutdown:
yy
“LIGHT” LED indicator is lit red and if “POWER/STANDBY” indicator
flashes amber.
yy
“TEMP” LED indicator is lit red, this indicates the projector has
overheated. Under normal conditions, the projector can be switched
back on.
yy
“TEMP” LED indicator flashes red and if “POWER/STANDBY”
indicator flashes amber.
Unplug the power cord from the projector, wait for 30 seconds and
try again. If the warning indicator light up again, contact your service
center for assistance.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
17
Section 3: Installation
3.3
Adjusting the Projected Image
3.3.1
Adjusting the Projector�s Height
The projector is equipped with elevator feet for adjusting the
image height.
111 Locate the adjustable foot you want to modify on the underside of the
projector.
222 Rotate the adjustable ring clockwise to raise the projector or counter
clockwise to lower it. Repeat with the remaining feet as needed.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
18
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 3: Installation
3.3.2
Adjusting the Projector�s Focus
To focus the image, slide the focus switch to left/right until the
image is clear.
yy
1080p series: The projector will focus at distances from 1.443 to 1.887
feet (0.437 to 0.572 meters).
yy
Ultra Wide series: The projector will focus at distances from 1.413 to
1.884 feet (0.428 to 0.571 meters).
Focus switch
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
19
Section 3: Installation
3.3.3
Adjusting Projection Image Size (Diagonal)
yy
1080p series: Projection Image Size from 80” to 100” (2.03 to 2.54
meters).
yy
Ultra Wide series: Projection Image Size from 120” to 140” (3.05 to 3.56
meters).
Top View
Screen
Screen (W)
Height
Projection Distance (D1)
Projection Distance (D2)
Screen
Di
ag
on
al
Wide
Screen (H)
Side View
Offset (Hd)
Projection Distance (D1)
Projection Distance (D2)
DHD400S
Diagonal length
(inch) size of
16:9
20
Projection Distance Projection Distance
(D1)
(D2)
(cm)
(inch)
Screen Size W x H
(cm)
(inch)
Offset (Hd)
Width
Height
Width
Height
Wide
Wide
Wide
Wide
(cm)
87
192.6
108.3
75.8
42.6
23.3
9.2
54.3
21.4
28.9
(inch)
11.4
90
199.2
112.1
78.4
44.1
24.9
9.8
55.9
22.0
29.6
11.7
95
210.3
118.3
82.8
46.6
27.7
10.9
58.7
23.1
30.9
12.2
100
221.4
124.5
87.2
49.0
30.5
12.0
61.5
24.2
32.2
12.7
102
225.8
127.0
88.9
50.0
31.6
12.4
62.6
24.6
32.7
12.9
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 3: Installation
DUW350S
Diagonal length
(inch) size of
16:9
Screen Size W x H
(cm)
(inch)
Projection Distance Projection Distance
(D1)
(D2)
(cm)
(inch)
Offset (Hd)
Width
Height
Width
Height
Wide
Wide
Wide
Wide
(cm)
120
285.4
107.0
112.4
42.1
46.7
18.4
77.7
30.6
36.9
(inch)
14.5
125
297.3
111.5
117.0
43.9
49.7
19.6
80.7
31.8
38.2
15.0
130
309.2
115.9
121.7
45.6
52.6
20.7
83.6
32.9
39.5
15.6
135
321.1
120.4
126.4
47.4
55.6
21.9
86.6
34.1
40.8
16.1
140
333.0
124.9
131.1
49.2
58.6
23.1
89.6
35.3
42.0
16.5
NOTE:
™™ This table is for user’s reference only.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
21
Section 4: User Controls
444
User Controls
4.1
Control Panel & Remote Control
4.1.1
Control Panel
Using the Control Panel
POWER
Refer to the “Power On/Off the Projector” section on
pages 16-17.
Enter
Press Enter to confirm your item selection.
INPUT
Press INPUT to select an input signal.
MENU
Press MENU to launch the on-screen display (OSD)
menu. To exit OSD, press MENU again.
Four Directional Select Use
to select items or make adjustments
Keys
to your selection.
Refer to the LED indicator of the projector light
LIGHT LED
source status.
TEMP LED
Refer to the LED indicator of the projector
temperature status.
ON/STANDBY LED
Refer to the LED indicator of the projector power
status.
22
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
4.1.2
Remote Control
Using the Remote Control
Infrared
transmitter
Sends signals to the projector.
LED
LED Indicator.
Power
Refer to the “Power On/Off the
Projector” section on pages 16-17.
Exit
Press “Exit” to close the OSD menu.
Zoom in
Zoom in the projector display.
Reset
Return the adjustments and settings to
the factory default values (except for
light counter).
Zoom out
Zoom out the projector display.
Enter
Confirm your item selection.
Input
Press “Input” to select an input signal.
Auto
Automatically synchronizes the
projector to the input source.
Four Directional Use
to select items or make
Select Keys
adjustments to your selection.
Adjust image distortion caused by tilting
Keystone +/the projector.
Volume +/Aspect ratio
Menu
Adjust to increase/decrease the
volume.
Use this function to choose your required aspect ratio.
Press “Menu” to launch the on-screen
display (OSD) menu. To exit OSD,
press “Menu” again.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
23
Section 4: User Controls
Using the Remote Control
24
VGA1
Press “VGA1” to choose VGA IN 1
connector.
Black screen
Momentarily turns off/on the audio and
video.
HDMI1
Press “HDMI1” to choose HDMI IN 1
connector.
HDMI2
Press “HDMI2” to choose HDMI IN 2
connector.
VGA2
Press “VGA2” to choose VGA IN 2
connector.
Video
Press “Video” to choose Composite
video source.
Screen freeze
Pause the screen image. Press again
to resume the screen image.
Image
Select the display mode from Bright,
PC, Movie, Game, and User.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
4.2
On-screen Display Menus
The Projector has multilingual On-screen Display menus that
you can use to make image adjustments and change a variety
of settings.
4.2.1
How to operate
111 To open the OSD menu, press “Menu” on the Remote Control or
Projector Keypad.
keys to select any item in the
222 When OSD is displayed, use the
main menu. While making a selection on a particular page, press the
or “Enter” key to enter sub menu.
333 Use the
using the
keys to select the desired item and adjust the settings
key.
444 Select the next item to be adjusted in the sub menu and adjust as
described above.
555 Press “Enter” to confirm, and the screen will return to the main menu.
666 To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
Image
Main Menu
Color Mode
PC
Wall Color
White
Brightness
Contrast
Sharpness
Saturation
Hue
Gamma
Select
Sub Menu
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Enter
Back
Settings
25
Section 4: User Controls
4.2.2
Image
Image
Color Mode
PC
Wall Color
White
Brightness
Contrast
Sharpness
Saturation
Hue
Gamma
Select
Enter
Back
Color Mode
There are many factory presets optimized for various types of images. Use
the ◄ or ► button to select the item.
• Bright: For brightness optimization.
• PC: For meeting presentation.
• Movie: For playing video content.
• Game: For game content.
• User: Memorize user’s settings.
Wall Color
Use this function to obtain an optimized screen image according to the wall
color. You can select from “White”, “Light Yellow”, “Light Blue”, “Pink”, and
“Dark Green”.
Brightness
Adjust the brightness of the image.
• Press the ◄ button to darken image.
• Press the ► button to darken image.
Contrast
The Contrast controls the difference between the lightest and darkest parts of
the picture. Adjusting the contrast changes the amount of black and white in
the image.
• Press the ◄ button to decrease the contrast.
• Press the ► button to increase the contrast.
26
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
Sharpness
Adjust the sharpness of the image.
• Press the ◄ button to decrease the sharpness.
• Press the ► button to increase the sharpness.
Saturation
Adjust a video image from black and white to fully saturated color.
• Press the ◄ button to decrease the amount of saturation in the image.
• Press the ► button to increase the amount of saturation in the image.
Hue
Adjust the color balance of red and green.
• Press the ◄ button to increase the amount of green in the image.
• Press the ► button to increase the amount of red in the image.
Gamma
This allows you to adjust the gamma value to obtain the better image contrast
for the input.
NOTE:
™™ Sharpness, Saturation and Hue functions are only supported under video mode.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
27
Section 4: User Controls
4.2.3
Configuration
Configuration
Aspect Ratio
Auto
Phase
Clock
H. Position
V. Position
Digital Zoom
V. Keystone
Front Ceiling
Orientation
Select
Enter
Back
Aspect Ratio
• Auto: Keep the image with original width-height ratio and maximize the
image to fit native horizontal or vertical pixels.
• 4:3: The image will be scaled to fit the screen and displayed using a 4:3
ratio.
• 16:9: The image will be scaled to fit the width of the screen and the height
adjusted to display the image using a 16:9 ratio.
• 16:10: The image will be scaled to fit the width of the screen and the height
adjusted to display the image using a 16:10 ratio. (only for DHD400S).
• UWHD: The image will be scaled to fit the width of the screen and the
height adjusted to display the image using a 16:6 ratio (only for DUW350S).
Phase
Synchronize the signal timing of the display with the graphic card. If the image
appears unstable or flickers, use this function to correct it.
Clock
Adjust to achieve an optimal image when there is a vertical flicker in the
image.
H. Position
• Press the ◄ button to move the image left.
• Press the ► button to move the image right.
28
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
V. Position
• Press the ◄ button to move the image down.
• Press the ► button to move the image up.
Digital Zoom
• Press the ◄ button to reduce the size of an image.
• Press the ► button to magnify an image on the projection screen.
V. Keystone
Press the ◄ or ► button to adjust image distortion vertically. If the image
looks trapezoidal, this option can help make the image rectangular.
Orientation
• Front: The image is projected straight on the screen.
• Front Ceiling: This is the default selection. When selected, the image will
turn upside down.
• Rear: When selected, the image will appear reversed.
• Rear Ceiling: When selected, the image will appear reversed in upside
down position.
NOTE:
™™ H. Position and V. Position ranges will depend on input source.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
29
Section 4: User Controls
4.2.4
Settings
Settings
Language
English
OSD Position
Closed Caption
Off
VGA Output (Standby)
Off
LAN (Standby)
Off
VGA-2 (Function)
Input
Test Pattern
Off
Factory Reset
Select
Enter
Back
Language
Choose the multilingual OSD menu. Press the ◄ or ► button into the sub
menu and then use the ▲ or ▼ button to select your preferred language.
Press ► on the remote control to finalize the selection.
Language
Select
Enter
Back
OSD Position
Choose the menu location on the display screen.
Closed Caption
Use this function to enable close caption menu. Select an appropriate closed
captions option: Off, CC1, CC2, CC3, and CC4.
VGA Output (Standby)
Choose “On” to enable VGA OUT connection.
30
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
LAN (Standby)
Choose “On” to enable LAN connection. Choose “Off” to disable LAN
connection.
VGA-2 (Function)
• Input: Choose “Input” to let the VGA port works as a VGA input function.
• Output: Choose “Output” to enable the VGA Out function once the projector
is powered on.
Test Pattern
Display a test pattern.
Factory Reset
Choose “Yes” to return the parameters on all menus to the factory default
settings.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
31
Section 4: User Controls
4.2.5
Audio
Audio
Speaker
On
Line Out
On
Microphone
On
Mute
Off
Volume
Microphone Volume
Select
Enter
Back
Speaker
• Choose “On” to enable the speaker.
• Choose “Off” to disable the speaker.
Line Out
• Choose “On” to enable the line out function.
• Choose “Off” to disable the line out function.
Microphone
• Choose “On” to enable the microphone.
• Choose “Off” to disable the microphone.
Mute
• Choose “On” to turn mute on.
• Choose “Off” to turn mute off.
Volume
• Press the ◄ button to decrease the volume.
• Press the ► button to increase the volume.
Microphone Volume
• Press the ◄ button to decrease the microphone volume.
• Press the ► button to increase the microphone volume.
32
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
4.2.6
Options
Options
Logo
Default
Screen Capture
Auto Source
On
Input
Auto Power Off (Min)
Laser Settings
Off
High Altitude
Filter Alarm (Hour)
Information
Select
Enter
Back
Logo
Use this function to set the desired startup screen. If changes are made they
will take effect the next time the projector is powered on.
• Default: The default startup screen.
• User: Use stored picture from “Screen Capture” function.
Screen Capture
Press ► button to capture an image of the picture currently displayed on
screen.
Screen capture in progress...
Please Wait.
NOTE:
™™ For successful logo capture, ensure that the on-screen image does not exceed the projector’s native
resolution. (1080P : 1920x1080 / UWHD : 1920x720).
™™ “Screen Capture” is not available when 3D is enabled.
™™ Before active this function, it is recommended that “Aspect Ratio” is set to the “Auto”.
Auto Source
• On: The projector will search for other signals if the current input signal is
lost.
• Off: The projector will only search current input connection.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
33
Section 4: User Controls
Input
Press ► button to enable/disable input sources. The projector will not search
for inputs that are not selected.
Input
VGA-1
VGA-2
HDMI-1
HDMI-2
Video
MULTIMEDIA
Select
Enter
Back
Auto Power Off (Min)
Sets the countdown timer interval. The countdown timer will start, when there
is no signal being sent to the projector. The projector will automatically power
off when the countdown has finished (in minutes).
Laser Settings
Refer to page 35.
High Altitude
• On: The built-in fans run at high speed. Select this option when using the
projector at altitudes above 2500 feet/762 meters or higher.
• Off: The built-in fans automatically run at a variable speed according to the
internal temperature.
Filter Alarm (Hour)
• Filters Alarm (Hour): Set the filter reminder time.
• Cleaning Up Reminder: Select “Yes” to reset the dust filter hour counter
after replacing or cleaning the dust filter.
Information
Display the projector information for model name, SNID, source, resolution,
software version, and aspect ratio on the screen.
34
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
4.2.7
Options | Laser Settings
Laser Settings
Hours Used (Normal)
Hours Used (ECO)
Laser Power Mode
Select
Normal
Enter
Back
Hours Used (Normal)
Display the projection time of normal mode.
Hours Used (ECO)
Display the projection time of ECO mode.
Laser Power Mode
• Normal: Normal mode.
• ECO: Use this function to dim the projector light which will lower power
consumption and extend the light source life.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
35
Section 4: User Controls
4.2.8
3D
3D
3D
Auto
3D Invert
Off
3D Format
1080@24
Select
Enter
Back
3D
• Auto: When a HDMI 1.4a 3D timing identification signal is detected, the 3D
image is selected automatically.
• Choose “On” to enable 3D function.
• Choose “Off” to disable 3D function.
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D glasses, you
may need to execute “Invert” to get best match of left/right image sequence to
get the correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame Packing”, “Sideby-Side (Half)”, “Top and Bottom”, “Frame Sequential”, and “Field Sequential”.
1080p@24
Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in
the1080p @ 24 frame packing.
NOTE:
™™ “Frame Sequential” is supported the DLP Link 3D input signals from VGA/HDMI connector.
™™ “Frame Sequential”/“Field Sequential” are supported the HQFS 3D input signals from Video connector.
™™ “Frame Packing”/“Side by Side(Half)” / “Top and Bottom” are supported from HDMI 1.4a 3D input signals.
36
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
4.2.9
Interactive
Interactive
Interactive Settings
Select
On
Enter
Back
Interactive Settings
• Choose “On” to enable Interactive function.
• Choose “Off” to disable Interactive function.
You must to unplug the Mini USB cable that connects NB/desktop with
the projector before using the Interactive function. After you complete the
Interactive Settings in OSD, use Mini USB cable to connect NB/desktop with
the projector.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
37
Section 4: User Controls
4.2.10 LAN
LAN
Status
Disconnected
DHCP
On
IP Address
Subnet Mask
Gateway
DNS
MAC Address
Group Name
Projector Name
Location
Contact
Select
Enter
Back
Status
Display the network connection status.
DHCP
Configure the DHCP settings.
• On: Choose “On” to let the projector to obtain an IP address automatically
from your network.
• Off: Choose “Off” to assign IP, Subnet Mask, Gateway, and DNS
configuration manually.
IP Address
Display an IP address.
Subnet Mask
Display the subnet mask number.
Gateway
Display the default gateway of the network connected to the projector.
DNS
Display the DNS number.
MAC Address
Display the MAC address.
38
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
Group Name
Display the group name.
Projector Name
Display the projector name.
Location
Display the projector location.
Contact
Display the contact information.
NOTE:
™™ To set a manual IP address while DHCP off, use the WEB Management interface.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
39
Section 4: User Controls
How to use web browser to control your projector
1.Turn on DHCP to allow a DHCP
server to automatically assign an IP, or
manually enter the required network
information.
Status
Connect
DHCP
Off
4.Based on network web-page for the
input-string in [tools] tab, the limitation
for Input-Length is in the below list
(“space” and the other punctuation key
included):
Category
IP Address
Subnet Mask
Crestron Control
Gateway
DNS
2.Choose apply and press
button to
complete the configuration process.
3.Open your web browser and type the IP
Address from the OSD LAN screen. The
web page will display as below:
Projector
Network
Configuration
User Password
Admin Password
Item
Input-Length
(characters)
IP Address
15
IP ID
2
Port
5
Projector Name
10
Location
9
Assigned To
9
DHCP (Enabled)
(N/A)
IP Address
15
Subnet Mask
15
Default Gateway
15
DNS Server
15
Enabled
(N/A)
New Password
15
Confirm
15
Enabled
(N/A)
New Password
15
Confirm
15
NOTE:
™™ When you used the projector IP address, you will can not
link to your service server.
40
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.0.100) from LAN function of projector.
IP Address
Step 2: Select apply and press “Enter” button to submit function or press “menu” key to
exit.
Step 6: To open Internet Options, click IE
Step 3: To open Network Connections,
web browser, click Internet Options,
click Start, click Control Panel,
click the Connections tab and click
click Network and Internet
“LAN Settings...”.
Connections, and then click
Network Connections. Click the
connection you want to configure,
and then, under Network Tasks
, click Change settings of this
connection.
Step 4: On the General tab, under
This connection uses the
following items, click Internet
Protocol (TCP/IP), and then click
“Properties.”
Step 7: The Local Area Network (LAN)
Setting dialog appears. In the
Proxy Server area, cancel the
Use a proxy server for your LAN
checkbox, then click “OK” button
twice.
Step 5: Click Use the following IP
address, and type as below:
1) IP address: 192.168.0.100
2) Subnet mask: 255.255.255.0
3) Default gateway:192.168.0.254
Step 8: Open Internet Explorer and type
the IP address 192.168.0.100 in the
address box. Press Enter.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
41
Section 4: User Controls
Crestron RoomView Control Tool
Crestron RoomView™ provides a central monitoring station for 250+ control systems on
a single Ethernet network (more are possible, the number depends on the combination of
IP ID and IP address). Crestron RoomView monitors each projector, including projector’s
online status, system power, light source life, network setting and hardware faults, plus any
custom attribute as defined by the Administrator. The Administrator can add, delete, or edit
room information, contact information and events, which are logged automatically by the
software for all users. (Operation UI as following image)
1. Main Screen
2. Edit Room
NOTE:
™™ Crestron RoomView’s function is set according to the products’ models and specifications.
42
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 4: User Controls
3. Edit Attribute
4. Edit Event
For further information, please visit:
http://www.crestron.com & www.crestron.com/getroomview.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
43
Section 5: Multimedia
555
5.1
Multimedia
Accessing Multimedia Files
This projector supports two methods to project the media files (photos, videos,
music, documents) stored on following devices:
aaa WIFI dongle - wirelessly access the media files stored on your mobile
phone, tablet PC, notebook, or desktop.
bbb USB flash drive - directly access the media files stored in the device.
5.1.1
How to access Multimedia mode
111 Plug a wireless dongle or a USB flash drive into the USB connector at
E62405SP
R
the back of projector.
222 Press “INPUT” on the remote control or on the control panel to turn on
the projector. When the Input menu appears, press the
keys to
select “Multimedia” and the “Enter” key to confirm.
NOTE:
Suggest to have the WIFI dongle with Realtek RTL8192CU chipset.
™™
The recommended WIFI dongles are WL-7200-V1, Abocom WU5508, EDUP EP-N1528.
44
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 5: Multimedia
Mobile Display
To access the media files stored on your mobile device or tablet PC, do the
folllowing:
1. On Multimedia menu, select Mobile/Tablet.
Multimedia
Mobile/Tablet
Laptop
Desktop
USB Disk
2. On your mobile device or tablet PC, download “EZview” application App
Store (iOS) or Play Store (Android).
Media Display
Mobile/Tablet
Install app "EZview" from
Google/app store
Enable your phone WIFI function,
and search for AP to connect.
AP Name
Enter password
Open "EZview" and enter
PCTOOL password
Password
3. Enable your mobile device or tablet PC WiFi function, and search the AP
name listed in the Wi-Fi network list.
4. On the initial connection, you will be prompted to enter a password. Enter
the password.
5. Launch “EZview” application and enter the PCTOOL password.
6. Wait until the connection is established. The media files on your mobile
device or tablet PC can be accessed using the projector.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
45
Section 5: Multimedia
Laptop Display
To access the media files stored on your laptop/notebook, do the folllowing:
1. On Multimedia menu, select Laptop.
Multimedia
Mobile/Tablet
Laptop
Desktop
USB Disk
Settings
2. Enable your laptop/notebook WiFi function, and search the AP name listed
in the Wi-Fi network list.
Media Display
Laptop
Enable your phone WIFI function,
and search for AP to connect.
Enter password
open browser and enter ip
address below and select & install
application by OS
AP Name
Password
IP Address
open EZview and enter control code
on the left-down side of the screen
Control Code
3. On the initial connection, you will be prompted to enter a password. Enter
the password.
4. Open your web browser and type the IP address. Then select “Wifi” on
the left side of the screen and install application required by the operation
system.
5. Launch “EZview” application and enter the control code shown on the rightbottom side of the screen.
6. Wait until the connection is established. The media files on your laptop/
notebook can be accessed using the projector.
46
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 5: Multimedia
Desktop Display
To access the media files stored on your desktop, do the folllowing:
1. On Multimedia menu, select Desktop.
Multimedia
Laptop
Desktop
USB Disk
Settings
2. Open your web browser and enter the IP address. Then select “Wifi” on
the left side of the screen and install application required by the operation
system.
Media Display
Desktop
open browser and enter ip
address below and select & install
application by OS
IP Address
open EZview and enter control code
on the left-down side of the screen
Control Code
3. Launch “EZview” application and type the control code shown on the rightbottom side of the screen.
4. Wait until the connection is established. The media files on your desktop
can be accessed using the projector.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
47
Section 5: Multimedia
USB Storage Display
To access the media files stored on your USB flash drive, do the folllowing:
Supported File Format
Multimedia Category File Format
Photo
BMP, JPG, PNG
Music
MP3, WMA
Video
AVI, MOV, MP4, RM, RMVB, DAT, MPG, ISO, TS,
MKV, VOB, and WMV
Document
WORD, EXCEL, PPT, PDF
1. On Multimedia menu, select USB Disk.
Multimedia
Desktop
USB Disk
Settings
2. Use the
48
keys to select the file category and press the “Enter” key.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 5: Multimedia
Multimedia
Desktop
USB Disk
Photo
Video
Settings
Music
Office Viewer
3. Use the
to confirm.
keys to select the file to view/play and press the “Enter” key
Configuring Multimedia Settings
To change the settings, do the folllowing:
1. On Multimedia menu, select Settings.
Multimedia
USB Disk
Settings
2. Use the
keys to select the desired menu option and press the
“Enter” key to enter the submenu.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
49
Section 5: Multimedia
Multimedia
USB Disk
Settings
System
Video
Photo
Music
WiFi
•
System: Select this option to view the firmware version and update
firmware.
•
Video: Select this option to change the display ratio and set the
repeat mode.
•
Photo: Select this option to change the display ratio, slideshow
pattern, and slideshow duration.
•
Music: Select this option to set the repeat mode­.
•
WiFi: Select this option to configure the Wi-Fi connection.
keys to select the adjust/select the setting and press the
3. Use the
“Enter” key to confirm.
50
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 6: Appendices
666
Appendices
6.1
Installing and Cleaning the Optional Dust Filter
We recommend you clean the dust filter every 500 hours of operation, or more often if
you are using the projector in a dusty environment.
When the warning message appears on the screen, do the following to clean the air
filter:
The usage time of the dust filter is reached.
Please clean the dust filters for better performance.
NOTE:
™™ The optional dust filter should be used in dusty environments.
™™ If the dust filter is installed, a proper maintenance will prevent overheating and projector malfunction.
™™ The dust filter is optional.
™™ The specific interfaces are selected in terms of the specifications of types.
2
1
\
1
2
Air Filter Cleaning Procedure:
1. Power off the projector by pressing the “ ” button and unplug the power cord.
2. Pull out the dust filter, as shown in the illustration (1).
3. Carefully remove the dust filter. Then clean or change the filter in illustration
(2).
To install the filter, reverse the previous steps.
4. Turn on the projector and reset the filter usage counter after the dust filter is
replaced.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
51
Section 6: Appendices
6.2
Compatibility Modes
6.2.1
VGA Analog
a. PC signal
Modes
VGA
IBM
SVGA
Apple, MAC II
XGA
V. Frequency [Hz]
H. Frequency [Hz]
640x480
60
31.5
640x480
67
35.0
640x480
72
37.9
640x480
75
37.5
640x480
85
43.3
720x400
70
31.5
800x600
56
35.1
800x600
60
37.9
800x600
72
48.1
800x600
75
46.9
800x600
85
53.7
832x624
75
49.1
1024x768
60
48.4
1024x768
70
56.5
1024x768
75
60.0
1024x768
85
68.7
1024x768
120
99.0
Apple, MAC II
1152x870
75
68.7
1280x1024
60
64.0
SXGA
1280x1024
72
77.0
1280x1024
75
80.0
1280x960
60
60.0
QuadVGA
52
Resolution
1280x960
75
75.2
SXGA+
1400x1050
60
65.3
UXGA
1600x1200
60
75.0
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 6: Appendices
b. Extended wide timing
Resolution
V. Frequency [Hz]
H. Frequency [Hz]
1280x720
60
44.8
1280x800
60
49.6
1366x768
60
47.7
1440x900
60
59.9
WSXGA+
1680x1050
60
65.3
UWHD
1920x720
60
44.35
Modes
WXGA
c. Component signal
Modes
480i
576i
480p
576p
720p
1080i
1080p
Resolution V. Frequency [Hz]
720x480
59.94(29.97)
(1440x480)
720x576
50(25)
(1440x576)
720x480
59.94
15.7
15.6
31.5
720x576
50
31.3
1280x720
60
45.0
1280x720
50
37.5
1920x1080
60(30)
33.8
1920x1080
50(25)
28.1
1920x1080
23.98/24
27.0
1920x1080
60
67.5
1920x1080
50
56.3
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
H. Frequency [Hz]
53
Section 6: Appendices
6.2.2
HDMI Digital
a. PC signal
Modes
VGA
IBM
SVGA
Apple, MAC II
XGA
Apple, MAC II
SXGA
QuadVGA
54
Resolution
V. Frequency [Hz]
H. Frequency [Hz]
640x480
60
31.5
640x480
67
35.0
640x480
72
37.9
640x480
75
37.5
640x480
85
43.3
720x400
70
31.5
800x600
56
35.1
800x600
60
37.9
800x600
72
48.1
800x600
75
46.9
800x600
85
53.7
832x624
75
49.1
1024x768
60
48.4
1024x768
70
56.5
1024x768
75
60.0
1024x768
85
68.7
1024x768
120
99.0
1152x870
75
68.7
1280x1024
60
64.0
1280x1024
72
77.0
1280x1024
75
80.0
1280x960
60
60.0
1280x960
75
75.2
SXGA+
1400x1050
60
65.3
UXGA
1600x1200
60
75.0
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 6: Appendices
b. Extended wide timing
Modes
WXGA
Resolution
V. Frequency [Hz]
H. Frequency [Hz]
1280x720
60
44.8
1280x800
60
49.6
1366x768
60
47.7
1440x900
60
59.9
WSXGA+
1680x1050
60
65.3
UWHD
1920x720
60
44.35
Modes
Resolution
V. Frequency [Hz]
H. Frequency [Hz]
480p
640x480
720x480
(1440x480)
720x576
(1440x576)
720x480
59.94/60
31.5
59.94(29.97)
15.7
50(25)
15.6
59.94
31.5
720x576
50
31.3
1280x720
60
45.0
1280x720
50
37.5
1920x1080
60(30)
33.8
c. Video signal
480i
576i
480p
576p
720p
1080i
1080p
1920x1080
50(25)
28.1
1920x1080
23.98/24
27.0
1920x1080
60
67.5
1920x1080
50
56.3
d. HDMI 1.4a mandatory 3D timing- Video Signal
Modes
Frame
Packing
Side-bySide(Half)
Top and
Bottom
Resolution
V. Frequency [Hz]
H. Frequency [Hz]
720p
50
31.5
720p
59.94/60
15.7
1080p
23.98/24
15.6
1080i
50
31.5
1080i
59.94/60
31.3
720p
50
45.0
720p
59.94/60
37.5
1080p
23.98/24
33.8
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
55
Section 6: Appendices
6.3
RS232 Commands and Protocol Function List
6.3.1
RS232 Port Setting
Items
Method
Communication Method
6.3.2
Asynchronous Communication
Bits per seconds
19200
Data bits
8 bits
Parity
None
Stop bits
1
Flow control
None
RS232 Signals Connection
Computer COM Port
(D-Sub 9pin connector)
Projector COM Port
(D-Sub 9pin connector)
NOTE:
™™ RS232 shell is grounded.
56
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 6: Appendices
6.3.3
Command
Description
Commands Set List
Command
Projector Return
N value
Power
(PWR n)
Pass : P
Fail : F
0 : Off
1 : On
Keypad
(KEY n)
Pass : P
Fail : F
1 : Up
2 : Left
3 : Right
4 : Down
5 : Menu
6 : Source
7 : Keystone+
8 : Keystone9 : Volume+
10 : Volume-
Resync
(RSC n)
Pass : P
Fail : F
1
AV Mute (Blank)
(AVM n)
Pass : P
Fail : F
0 : Off
1 : On
Freeze
(FRZ n)
Pass : P
Fail : F
0 : Unfreeze
1 : Freeze
Input Source
(SIN n)
Pass : P
Fail : F
1 : VGA 1
2 : VGA 2
3 : HDMI 1
4 : HDMI 2
5 : Video
6 : Multimedia
Color Mode
(PST n)
Pass : P
Fail : F
1 : Bright
2 : PC
3 : Movie
4 : Game
5 : User
Brightness
(BRT n)
Pass : P
Fail : F
Value: 0~100
Contrast
(CON n)
Pass : P
Fail : F
Value: 0~100
Sharpness
(SHA n)
Pass : P
Fail : F
Video only
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Note
VGA only
57
Section 6: Appendices
Aspect Ratio
(ASP n)
Pass : P
Fail : F
1 : Auto
2 : 4:3
3 : 16:9
4 : 16:10 / Ultra Wide
Digital Zoom
(DZM n)
Pass : P
Fail : F
0 : Zoom1 : Zoom+
Keystone
(KST n)
Pass : P
Fail : F
Value: -40 ~ 40
Orientation
(SOR n)
Pass : P
Fail : F
1 : Front
2 : Rear
3 : Front Ceiling
4 : Rear Ceiling
Language
(LOC n)
Pass : P
Fail : F
1 : English
2 : German
3 : Swedish
4 : French
5 : Arabic
6 : Dutch
7 : Norwegian
8 : Danish
9 : Simplified Chinese
10 : Polish
11 : Korean
12 : Russian
13 : Spanish
14 : Traditional
Chinese
15 : Italian
16 : Portuguese
17 : Turkish
18 : Japanese
Menu Location
(MSP n)
Pass : P
Fail : F
1 : Top Left
2 : Top Right
3 : Center
4 : Bottom Left
5 : Bottom Right
Reset
(RST n)
Pass : P
Fail : F
Mute
(MUT n)
Pass : P
Fail : F
0 : Off
1 : On
Volume
(VOL n)
Pass : P
Fail : F
Value: 0~30
58
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 6: Appendices
Microphone
Volume
(MIC n)
Pass : P
Fail : F
Value: 0~30
Auto Power Off
(min)
(ASH n)
Pass : P
Fail : F
Step = 5
(0,5,10,15,20…
95,100,105,110,115,
120)
High Altitude
(HAT n)
Pass : P
0 : Off
1 : On
Fail : F
Color Mode Read
(PST ?)
Pass :Okn
Fail : F
n:
1 = Bright
2 = PC
3 = Movie
4 = Game
5 = User
Aspect Ratio Read
(ASP ?)
Pass :Okn
Fail : F
n:
1 = Auto
2 = 4:3
3 = 16:9
4 = 16:10 (Ultra Wide)
Input Source (curr.
src)
(SIN ?)
Pass :Okn
Fail : F
n:
0 = None
1 = VGA1
2 = VGA2
3 = HDMI1
4 = HDMI2
5 = Video
6 = Multimedia
Sofware Version
(VER ?)
Pass :Okddd
Fail : F
Status
(SST ?)
Pass:
Okabbbbbccdddee
Fail : F
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
ddd : FW version
a = Power Status
b = LD Hour
c = Input Source
d = Firmware Version
e = Color mode
59
Section 6: Appendices
6.4
Optional Accessories
•• Wall mount - Silver + black (140-120104-01)
•• Wall Mount - Silver + white (140-120115-01)
•• IR Pen (140-121105-01)
•• Captiva Touch (140-122106-01)
6.5
Regulation & Safety Notices
This appendix lists the general notices of your projector.
FCC notice
This device has been tested and found to comply with the limits for
a Class B digital device pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference
to radio or television reception, which can be determined by turning
the device off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the device and receiver.
•• Connect the device into an outlet on a circuit different from that to
which the receiver is connected.
•• Consult the dealer or an experienced radio/television technician for
help.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
Caution
Changes or modifications not expressly approved by the manufacturer
could void the user’s authority, which is granted by the Federal
Communications Commission, to operate this projector.
60
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 6: Appendices
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
111This device may not cause harmful interference and
222This device must accept any interference received, including
interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la norme NMB003 du Canada.
Declaration of Conformity for EU countries
•• EMC Directive 2004/108/EC (including amendments)
•• Low Voltage Directive 2006/95/EC
•• R & TTE Directive 1999/5/EC (if product has RF function)
Disposal instructions
Do not throw this electronic device into the
trash when discarding. To minimize pollution
and ensure utmost protection of the global
environment, please recycle it.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
61
Section 6: Appendices
Safety Notice
WARNING
-- This projector is a Class 2 laser device that conforms with IEC
60825-1:2007 and CFR 1040.10 and 1040.11.
-- Class 2 laser product, Do Not Stare Into Beam.
-- This projector has built-in Class 4 laser module. Disassembly or
modification is very dangerous and should never be attempted.
-- Any operation or adjustment not specifically instructed by the user’s
guide creates the risk of hazardous laser radiation exposure.
-- Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
-- Do not stare into beam when the projector is on. The bright light
may result in permanent eye damage.
-- Without following the control, adjustment or operation procedure
may cause damage by the exposure of laser radiation.
-- Adequate instructions for assembly, operation, and maintenance,
including clear warnings concerning precautions to avoid possible
exposure to laser and collateral radiation in excess of the accessible emission limits in Class 2.
62
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
Section 6: Appendices
6.6
Ceiling Mount Installation
111 To prevent damage to your projector, please use ceiling mount (140-120104-01).
222 If you want to use a third-party ceiling mount kit, ensure the screws used to attach a
mount to the projector meet the following specifications:
yy Screw type: M4*4
yy Minimum screw length: 10mm
NOTE:
™™ Damage resulting from incorrect installation will void the warranty.
WARNING
••
••
••
If you buy a ceiling mount from another company, be sure to use the correct screw size. Screw size will
vary depending on the thickness of the mounting plate.
Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector.
Avoid installing the projector near a heat source.
CAPTIVA DUW350S/CAPTIVA DHD400S User Manual
020-000816-02 Rev. 1 (03-2016)
63
Download PDF
Similar pages