Page 1/6
Data sheet
P/N
1308450544-E
EAN 4250184117445
Patch cord Cat.6A AWG 26 0.5 m blue
2015-26-11
Illustrations
Dimensional drawing
See enlarged drawings at the end of document
Product specification
• especially suitable for shielded and unshielded class EA systems
• fully shielded Cat.6A patch cable AWG 26/7
• two shielded RJ45 connectors; 1:1 assignment
• cable type: S/FTP 4x2xAWG 26/7 PIMF
• cable sheath: LSHF(LSOH), halogen free
• Cat.6A to ISO/IEC 11801 Ed.2.2 (2011-06) and IEC 61935-2 Ed. 3.0 (2010-07), certified to GHMT
• class EA Link up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• suitable for 10 GBit Ethernet(IEEE 802.3an)and Remote Powering(PoE, PoE plus and UPoE) and HDBaseT
• snagless boot with integrated lever protection
• colors may differ slightly due to different protection lots
• standard length: 0,5; 1; 1,5; 2; 3; 4; 5; 6; 7; 8; 10; 15 and 20 m
• special lengths available on demand
Data sheet
Page 2/6
Patch cord Cat.6A AWG 26 0.5 m blue
P/N
1308450544-E
EAN 4250184117445
2015-26-11
Technical Data
General Data
Fields of application
Office
Design
Patch cords
Shielding
shielded
Transmission technology
Copper
Cable Type
S/FTP
Number of twisting elements
4
Twisting element
Pair
Wiring
1-1
Color
blue
Dimensions
Dimension - Interface 1 (L x W x H)
50.52 x 11.70 x 14.97 mm
Dimension - Interface 1 (L x W x H)
1.99 x 0.46 x 0.59 in.
Dimension - Interface 2 (L x W x H)
50.52 x 11.70 x 14.97 mm
Dimension - Interface 2 (L x W x H)
1.99 x 0.46 x 0.59 in.
Cable length (m)
0.50 m
Cable length (ft)
1.64 ft
Marking option
by cable boot
Transmission characteristics
Category (ISO)
6A
Class (ISO/IEC)
EA
Category (TIA)
6A
Remote Powering
yes
PoE
IEEE 802.3af
PoE plus
IEEE 802.3at
UPoE
yes
HDBaseT
yes
Transmission rate up to 10 GBit
IEEE 802.3an
Data sheet
Page 3/6
Patch cord Cat.6A AWG 26 0.5 m blue
P/N
1308450544-E
EAN 4250184117445
2015-26-11
Technical Data
Connections/interfaces
Connector technology interface 1
RJ45 plug
Connector technology interface 2
RJ45 plug
Number of ports interface 1
1
Number of ports interface 2
1
Number of equipped ports interface 1
1
Number of ports interface 2 equipped
1
Number of positions/contacts interface 1
8P/8C
Number of positions/contacts interface 2
8P/8C
Termination data, stranded wire (min. - max.)
Conductor cross section, stranded wire
AWG 26/7
Conductor cross section, stranded wire
0.141 mm²
Conductor diameter, stranded wire (bare copper)
0.483 mm
Conductor diameter, stranded wire (bare copper)
0.019 in.
Electrical characteristics
Current carrying capacity
max. 1 A
Rated voltage
max. 50 V
Contact resistance
max. 20 mOhm
Through resistance
max. 200 mOhm
Insulation resistance
min. 100 MOhm
Dielectric strength conductor-conductor (primarily)
max. 500 V DC
Dielectric strength conductor-conductor (secondary)
max. 500 V DC
Mechanical characteristics
Position/mounting of latch - standard installation
position
top
Materials and material properties
Material - Cable jacket
LSHF (LSOH)
Material - Plug housing interface 1
PC (polycarbonate)
Material - Plug housing interface 2
PC (polycarbonate)
Material - Contact interface 1
CuSn (tin bronze)
Material - Contact interface 2
CuSn (tin bronze)
Material - Contact finish interface 1
Au (gold)
Material - Contact finish interface 2
Au (gold)
Data sheet
Page 4/6
Patch cord Cat.6A AWG 26 0.5 m blue
P/N
1308450544-E
EAN 4250184117445
2015-26-11
Technical Data
Materials and material properties
Material - Contact carriers interface 1
Plastics
Material - Contact carriers interface 2
Plastics
Material - Shield interface 1
CuSn (tin bronze)
Material - Shield interface 2
CuSn (tin bronze)
Material - Shield finish interface 1
Sn (tin)
Material - Shield finish interface 2
Sn (tin)
Halogen free
yes
Environmental conditions
Temperature (min. - max.)
Temperature - Storage °C
-20 - 60 °C
Temperature - Storage °F
-4 - 140 °F
Temperature - Operating °C
-20 - 60 °C
Temperature - Operating °F
-4 - 140 °F
Temperature - Installation °C
0 - 50 °C
Temperature - Installation °F
32 - 122 °F
Certifications
GHMT Component
yes
Approvals
RoHS
compliant
The product meets the following standards
Generic cabling systems
General requirements
Connectors for electronic equipment
Free and fixed connectors
ISO/IEC 11801 Ed.2.2: 2011-06 | DIN EN 50173-1: 2011-09
TIA/EIA 568-C.2
DIN EN 60603-7
Information technology equipment DIN EN 55022
Radio disturbance characteristics
Specification for the testing of balanced and coaxial information technology cabling
Cords as specified in ISO/IEC 11801 and related
IEC 61935-2 Ed. 3.0 (2010-07)
standards
Data sheet
Page 5/6
Patch cord Cat.6A AWG 26 0.5 m blue
P/N
1308450544-E
EAN 4250184117445
2015-26-11
Technical Data
Classifications
ETIM 5.0
EC001262
Packing details
Type of packaging
1 pc(s) / plastic bag
Packaging unit - Weight (gram)
46.00 g
Packaging unit - Weight (pound)
0.10 lb
Data sheet
Patch cord Cat.6A AWG 26 0.5 m blue
Page 6/6
P/N
1308450544-E
EAN 4250184117445
2015-26-11
Illustrations
Dimensional drawing
Powered by TCPDF (www.tcpdf.org)
Download PDF
Similar pages