5x1 HDMI Switch 4K
User Reference Guide
P/N: CE-H23012-S1
04-1119A
1
Introduction
5x1 HDMI Switch 4K allows any of the 5 HDMI
sources to be displayed on one HDMI display and
supports ultra-high resolution up to 4K.
Key Features and Benefits
•
•
•
•
•
2
Connects up to 5 HDMI sources to one
HDMI display for seamless transitions
Delivers astonishing picture quality by
supporting high resolutions up to 4Kx2K
@30Hz
Built-in switch button, the included remote
control allows you to remotely control your
HDMI sources
Supports 3D, HDMI 1.4 and HDCP 1.4.
Backwards compatible with previous
versions
Premium metal enclosure enhances
durability and reliability
Specifications
Compliance
HDMI 1.4 / HDCP 1.4
Resolution
480p / 720p / 1080i / 1080p / 4K (3840x2160 @60Hz,
YUV 4:2:0)
Audio
Dolby TrueHD, DTS-HD master audio
Video bandwidth
Up to 10.2Gbps
Connectors
Input: 5 x 19-pin, HDMI Type-A, Female
Output: 1x 19-pin, HDMI Type-A, Female
HDMI cable range
Input up to 5m
Output up to 10m
Housing material
Metal
Power adapter
Input: AC 100-240V/ 50~60Hz
Output: DC 5V / 1A
Dimensions
4.53" (W) x 0.99" (H) x 2.45" (D)
Weight
0.69lbs
Operating temperature
32 to 104 degrees F
Storage temperature
-4 to 158 degrees F
Relative humidity
20% to 90% RH (non-condensing)
Package Contents
•
•
•
•
5x1 HDMI Switch 4K
Power Adapter
IR remote control
User reference guide
3
Layout
Power LED
HDMI Output
Source Selection
IR Receiver
Input LEDs Output LED
Figure 1: Front side
•
•
•
•
•
•
4
Power LED: On when the unit is powered
Source Selection: Press to select the input
source (Input 1, 2, 3, 4 or 5)
IR Receiver: Receive IR signal from the
remote control
Input LEDs: On when input signals are
detected
Output LED: On when the output signal is
detected
HDMI Output: Connect to your HDMI
display with an HDMI cable (cable not
included)
Power plug
HDMI input
HDMl inputs
Figure 2: Rear side
•
•
HDMI Inputs (x5): Connects to HDMI
source devices by HDMI cables (cable not
included)
Power plug: Power adapter plug
IR Remote Control
Previous
Next
Input Select Button
Figure 3: IR Remote Control
•
•
•
Previous: Select the previous input source
Next: Select the next input source
Input Select Button (1-5): Select input
source 1, 2, 3 ,4 or 5
5
Hardware Installation
1.
2.
3.
4.
5.
6.
6
Power off all source devices and displays.
Connect up to 5 HDMI source devices to the
switch's HDMI input ports using HDMI
cables (cables not included).
Connect your HDMI display to the switch's
HDMI Output with an HDMl cable (cable
not included).
Connect the included power adapter to the
switch's Power plug and plug it into a
reliable power outlet.
Power on all of the connected devices.
The switch is now ready for use.
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away. You
can also submit questions online and a technical support analyst will promptly respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for two (2) year from the date of purchase of the product. This warranty
is not transferable and is available only to the original purchaser of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having
similar features and functionality) the product if defective in materials or workmanship.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came with the
original package must be included
•
Include a copy of your original sales receipt inside the package with date of
purchase and place of purchase circled and clearly visible
•
Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping carton
•
You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer
7
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions
(including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy
I/O adapters) that bridge the connection between Desktop/Notebook systems
and external peripherals. SIIG continues to grow by adding A/V and Digital
Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, VARs and through e-commerce
sites.
PRODUCT NAME
5x1 HDMI Switch 4K
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
5x1 HDMI Switch 4K is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. All other names used in this publication are for identification only
and may be trademarks of their respective owners.
January, 2018
8
Copyright © 2018 by SIIG, Inc. All rights reserved.
Download PDF
Similar pages